#1 Le 10/11/2006, à 22:24
- albatros00
(résolu) duo beryl emeralda
:)bonjour,
je suis sous edgy avec une carte radéon X740XL.
je viens d'installer suivant ce tuto : http://doc.ubuntu-fr.org/applications/beryl
Beryl et Emeralda avec succès ??!
si j'arrive effectivement à les lancer , je ne peux quasiment rien en faire :
sous beryl impossible de voir un nouveau bureau
sous emeralda , idem pour les thèmes?
l'accélération 3 D est bien activée après vérif dans un terminal.
pourriez vous me donner une piste pour qu'au moins j'aie l'impression de ne pas avoir fait l'install. pour rien.
à tout hasard je vous envoie un xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "radeon"
VideoRam 128000
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSectionsi vous avez une idée pour me donner une piste?
merci et à+
Dernière modification par albatros00 (Le 19/11/2006, à 23:24)
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#2 Le 11/11/2006, à 00:04
- grisouille
Re : (résolu) duo beryl emeralda
ce que je trouve étrange, c'est que tu as 2 devices
l'un avec radeon et l'autre avec fglrx.
si tu utilise fglrx, je ne suis pas sur que ça marche sans xgl.
Hors ligne
#3 Le 11/11/2006, à 02:17
- albatros00
Re : (résolu) duo beryl emeralda
bonsoir grisouille,
non seulement j'ai 2 devices , mais en plus j'ai encore 2 autres fichiers xorg.conf:
celui ci : xorg.conf.200611052
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
et un troisieme: xorg.conf.original-0
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "vesa"
BusID "PCI:1:0:0"
VideoRam 128000
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection>>>>> Donc en tout 3 fihiers xorg.conf <<<<<< .
ça vient du fait que j'ai dû configurer manuellement xorg après la 1ere install. d'edgy car j'ai eu droit à l'écran noir au 1er lancement. ( sans doute que la carte ati radeon n'était pas reconnue).
ça a fini par se lancer mais je me retrouve maintenant avec 3 xorg.conf différents
Je crois qu'il faut déjà faire du nettoyage là dedans mais quoi garder???
et qui sait , ça ira p-être mieux avec Beryl?
si tu pouvais m'aider dans cette tâche , ça serait sympa...
merci pour ton aide
à+
Dernière modification par albatros00 (Le 15/11/2006, à 21:20)
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#4 Le 11/11/2006, à 08:46
- grisouille
Re : (résolu) duo beryl emeralda
les différents fichiers xorg.conf sont des sauvegardes, laisse les, ils pourraient te servir.
bon, pour que beryl fonctionne, il faut que tu es l'accélération graphique, tu as donc 2 possibilités.
soit utiliser les drivers propriétaires "fglrx", auquel cas pour beryl il te faudra installer xgl
pour ça tu as ce tuto : http://doc.ubuntu-fr.org/materiel/ati
soit utiliser les drivers libres "radeon" : http://doc.ubuntu-fr.org/materiel/ati_radeon
mais il faut avant que tu désinstalle tout ce qui concerne fglrx. En gros, une fois que tu n'as plus de trace des "fglrx", tu reprend le fichier xorg.conf.200611052 et tu remplace Driver "ati" par Driver "radeon". (et tu le renomme en xorg.conf)
Dans tout les cas, tant que tu n'as pas l'accélération graphique, laisse tomber beryl pour le moment. si tu l'as mis au démarrage de ta session, enlève le de là.
je ne sais pas si je suis assez précis ??
les tutos sont bien fait ça devrait aller.
je ne sais pas précisément pour ta carte, mais tu devrais essayer en premier avec les drivers radeon.
Hors ligne
#5 Le 11/11/2006, à 12:41
- albatros00
Re : (résolu) duo beryl emeralda
merci pour ton suivi,
j'ai bien l'accélération graphique (j'ai vérifié avec glxgears), ainsi qu'avec glxinfo | grep rendering.
c'est pour ça que je veux utiliser Beryl (qui est déjà installé mais pas fonctionnel).
mes fichiers xorg.conf n'ont pas l'extension "backup" , sauf 1 que je ne t'ai pas envoyé.(pour ne pas surcharger).
je pense ne pas faire d"erreur en supprimant le device fgrlx du tout 1er fichier xorg.conf que t'ai envoyé (il a 2 devices).
ou alors j'applique ta solution et j'ajoute des lignes en fin de fichier:
Section "Extensions"
Option "Composite" "disable"
EndSection
j'essaie ce soir et te tiens au courant
à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#6 Le 12/11/2006, à 15:45
- albatros00
Re : (résolu) duo beryl emeralda
flop complet,
j'ai viré dans synaptic tout ce qui concernait frlgx pour installer les drivers libres radeon. je redémarre mais plus d'interface graphique ;j'ai dû reconfigurer manuellement XSERVER .xorg. j'ai réinstallé les paquets fgrlx ;
j'ai réussi à avoir la 3D mais si jr fais un beryl-manager j'ai le message qui revient régulierement dans les forums pour ceux qui n'ont pas droit à Beryl :
XGL Absent, checking for NVIDIA
Nvidia Absent, assuming AIGLX
beryl: No composite extension
j'ai essayé plein de choses lues et relues sur les forums mais sans succès.
j'ai un PC lifetec avec 1 radeon x740xl
voici xorg:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
Option "AIGLX" "true"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "ati"
VideoRam 128000
BusID "PCI:1:0:0"
Option "UseInternalAGPGART"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSectionje sens que j'y suis presque et compte sur vous pour me dire comment virer le "presque"...
à+
Dernière modification par albatros00 (Le 15/11/2006, à 21:22)
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#7 Le 12/11/2006, à 16:18
- grisouille
Re : (résolu) duo beryl emeralda
pour ton xorg, t'as toutes les sections en double, moi je ferais ça :
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "fglrx"
VideoRam 128000
BusID "PCI:1:0:0"
Option "UseInternalAGPGART"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSectionet je te redis que si tu utilise les drivers propriétaires d'ati, tu dois installer xgl pour faire marcher beryl. Le message d'erreur que tu as te dis bien : "XGL Absent, checking for NVIDIA
Nvidia Absent". Donc c'est normal que beryl ne fonctionne pas.
cherche dans la doc l'installation de xgl.
Hors ligne
#8 Le 12/11/2006, à 16:30
- TiLK
Re : (résolu) duo beryl emeralda
Perso j'ai complété avec ce tuto et maintenant ça fonctionne chez moi
http://www.s2ii.com/blog/index.php?2006/10/08/92-aiglx-beryl-carte-ati-x700-mobility-pcie-sous-ubuntu-edgy-eft-beta
(adapté à ma radeon 9200)
Dernière modification par TiLK (Le 12/11/2006, à 16:31)
http://tilk68.blogspot.com
Hors ligne
#9 Le 12/11/2006, à 23:34
- albatros00
Re : (résolu) duo beryl emeralda
il y a longtemps que XGL est installé puis réinstallé etc... suivant ce tuto
http://doc.ubuntu-fr.org/applications/xgl/gnome
donc rien compris à ce message d'erreur:
XGL Absent, checking for NVIDIA
Nvidia Absent, assuming AIGLX
beryl: No composite extension
j'ai beau relire les tutos rapport à beryl , je tourne en rond...
mais je vais persévérer...
à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#10 Le 13/11/2006, à 00:18
- G-rom
Re : (résolu) duo beryl emeralda
dans les 1ers post que tu as fait tout était correct, il te manquait que xgl ou alors il était installé mais tu n'avais pas lancé beryl sous une section XGL.
Pour ceux qui se demande pourquoi albatros00 a des sections en double c'est normal c est quand on installe fglrx puiis qu'on fait
$ aitconfig --initialpour finir l'installation, le driver crée de nouvelles sections avec fglrx et les specs qui vont bien mais sans enlever les anciennes.
Sinon le tuto pour beryl dans le wiki est assez bien fait mais il y a une boulette enorme !! apres l'installe de fglrx ils passent directement à l'installation de beryl + emerald sans parler de l'installation de XGL, grosse erreur !! Je pense que c est pour ça que ne marchais pas chez toi albatros00
PS : @albatros00 modifie tes posts pour mettre le xorg.conf entre balises code parceque là ça prend trop de place 
Dernière modification par G-rom (Le 13/11/2006, à 00:20)
Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.
Hors ligne
#11 Le 13/11/2006, à 02:30
- albatros00
Re : (résolu) duo beryl emeralda
bonsoir G-rom,
je viens d'avancer en te lisant ... d'un pas vers le gouffre,
non , je plaisante à peine , ce que j'ai fait: j'ai simplement rajouté XGL dans ma session de démarrage.
j'ai redémarré et l'espace d'un instant j'ai vu beryl et son rubis éclairer mon écran,
j'ai cru l'espace d'un instant au miracle ...
mais tout est devenu blanc puis plus rien, tout s'est figé dans une absence de tout et , je ne sais pas si tu vas me croire , quand j'ai essayé au hasard la touche F7 , plusieurs rectangles blancs sont apparus avec un point d'interrogation bleu en bas à droite...
..... il était 1 H. et je n'avais pas bu ...
je suis allé en recovery (+ d'autre choix possible) , j'ai tapé startx et je suis reparti avec un bureau originel en langue anglaise tout pur et tout neuf.
à partir duquel je t'envoie ce post
euh... peux tu me dire comment retrouver ma config. d'origine et après , je crois , après ttes ces épreuves que je vais laisser tomber Beryl , il m 'en a fait trop voir!!!
merci de ton attention et à bientôt....
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#12 Le 13/11/2006, à 14:06
- G-rom
Re : (résolu) duo beryl emeralda
ne t'affole pas c'est normal. tu aurais du faire start gdm et non startx. c'est pour ça que tu t'es retrouvé avec tout en anglais.
reboot un coup et reprend ta session normale ça devrait etre bon. si tu ne veux pas redémarrer ctrl+alt+f1 pour retourner en console. sudo killall gdm puis start gdm devrait fonctionner ou meme peut etre une simple fermeture de session pour relogage (ça se dit ça ?? oO) en session classique gnome.
apres bin euh vire tout si tu veux arrêter beryl :
1) les dépots beryl
2) mise à jour avec un ptit apt-get update etc etc
3) tu vire xgl beryl toussa toussa et tous les fichiers de conf
4) et tu te fais un truc propre avec juste le fglrx des dépots et le xorg.conf qui va bien.
mais jpense que t'étais pas loin quand meme dommage, devait juste manquer un truc dans ta config de lancement de xgl ou dans ton accel 3D et pis faut rappeler que beryl est toujours en version 0.1 que la méthode XGL n'est vraiment pas tres propre hein donc ça peut pas marcher facilement chez tout le monde du 1er coup 
attendez la version de beryl sans le tfp et y aura plus besoin de tout ça 
Dernière modification par G-rom (Le 13/11/2006, à 14:08)
Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.
Hors ligne
#13 Le 13/11/2006, à 21:16
- albatros00
Re : (résolu) duo beryl emeralda
ça se complique : quand je fais startx (à partir de la console)
je démarre en anglais avec un bureau différent mais je retrouve certains de mes fichiers.
quand je fais start gdm j'ai >>> unknown job
et enfin et surtout!!!
quand je démarre en mode normal , et c'est là que je fais "help" à vous:
la barre de progression arrive à son terme , j'ai le son et le logo d'ubuntu puis>>> STOP , écran figé sans bureau , rien de rien ,?
j'éteins donc et je repars en mode recovery où J'ai UN SEUL résultat , pour l'instant : avec startx , je démarre en anglais.
que faire en root pour que le boot normal se termine , je n'en suis pas encore au formatage, du moins j'espère ?
à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#14 Le 13/11/2006, à 23:38
- G-rom
Re : (résolu) duo beryl emeralda
en mode console fait un ptit coup de sudo vi /etc/apt/source.list pour remettre bien tes dépots puis tu fais apt-get update et enfin vire tous les trucs lié à beryl et xgl.
dans ton xorg.conf remet nv au lieu de nvidia pour voir.
supprime en gros toutes les manip que tu as faites pour tenter de retrouver un truc clean.
Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.
Hors ligne
#15 Le 15/11/2006, à 02:27
- albatros00
Re : (résolu) duo beryl emeralda
bonsoir,
quand j'ai lu ton message , j'avais déjà formaté ma partition racine pour réinstaller edgy car à force de parcourir les forums et d'apporter tjrs plus de modif. , je ne savais plus comment faire machine arrière.
et là je mesuis dit , allons y à nouveau pour beryl , j'ai installé XGL , mes pilotes sont les propriétaires (fgrlx) et ma carte est bien une ATI.
je ne comprends pas ton dernier post où tu parles de mettre nv pour nvidia??
j'aimerais bien remplacer ma section "device" par ces lignes
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "fgrlx"
VideoRam 128000
BusID "PCI:1:0:0"
EndSection
mais ça plante au démarrage et je ddois reconfigurer mon xorg avec 1 backup.
pour l'instant , ça fonctionne avec les DEUX devices suivants:
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "vesa"
VideoRam 128000
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
et je ne le fais pas exprès
si tu as encore quelques ressources...
à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#16 Le 15/11/2006, à 08:06
- G-rom
Re : (résolu) duo beryl emeralda
ouais dsl j'ai confondu avec un autre poste ou le gars avait des problemes avec une nvidia
et sinon pour la section device pourquoi tu veux la remplacer ??? oO
si tu regarde la section server layout tu verras que c'est la section Device avec l'id "aticonfig-Device[0] qui est utilisée, donc tu peux pas le remplacer par une section qui s'appelle autrement, ou alors faut changer les section ou apparaissent cet id.
J'ai déjà expliqué pourtant pourquoi apres un aticonfig --initial on se retrouve avec ce genre de chose relis plus haut.
Sinon maintenant que tu as la 3D effectivement tu peux retenter XGL puis beryl, mais il y a plusieurs tuto pour XGL et surtout les script de lancement de XGL diffèrent presque partout c'est assez chiant... à toi de trouver celui qui marche chez toi.
PS: et modifie ton 1er post pour mettre ton xorg.conf entre balises code 
Dernière modification par G-rom (Le 15/11/2006, à 08:07)
Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.
Hors ligne
#17 Le 15/11/2006, à 08:28
- PDemong
Re : (résolu) duo beryl emeralda
Perso j'ai une ATI Radeon Mobility x300 et je viens enfin de rouler Beryl avec succès. C'est magnifique!
Bon alors voyons si on peut t'aider. On devrait d'abord mettre ton xorg.conf au propre. J'ai vu que tu as tenté d'utiliser le pilote libre sans succès, mais à mon avis tu n'as pas poussé assez loin. J'utilise le pilote "radeon" avec succès, je t'encourage à le faire.
Faisons un état des lieus si tu veux bien : envoie à nouveau ton xorg.conf, ainsi que ton log /var/log/Xorg.0.log
On va essayer de voir où tu t'es rendu.
Hors ligne
#18 Le 15/11/2006, à 09:05
- roger64
Re : (résolu) duo beryl emeralda
pour info, merci de lire ce fil 
http://forum.ubuntu-fr.org/viewtopic.php?pid=594088#p594088
Hors ligne
#19 Le 15/11/2006, à 21:57
- albatros00
Re : (résolu) duo beryl emeralda
bonsoir G-rom,
au moins j'aurai appris à mettre des balises 
j'ai le proprio installé donc également XGL et pour tester beryl je fais un beryl- manager dans la session en cours.Mais tu connais mon parcours + que chaotique ( j'étais pas loin car j'avais rajouté beryl-manager à la session de démarrage...mais je vais pas tout redécrire...)
en tt.cas merci pour la suite ? à+
salut Pdemong,
voici le xorg.conf
/etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Driver "vesa"
VideoRam 128000
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon X700 Pro (RV410)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSectionainsi que /var/log/xorg.0.log
dans un autre message (celui ci est trop long et ça bloque.....
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#20 Le 15/11/2006, à 21:58
- albatros00
Re : (résolu) duo beryl emeralda
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux ubuntuahbon 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 15 19:06:26 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF,
/usr/share/fonts/X11/Type1/,
/usr/share/fonts/X11/CID/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2580 card 8086,2580 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2581 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,2668 card 8086,2668 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1462,7091 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1462,7091 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1462,7091 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1462,7091 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1462,7091 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2640 card 8086,2640 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1462,7091 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2651 card 1462,7091 rev 03 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1462,7091 rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5e4b card 1462,1780 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5e6b card 1462,1781 rev 00 class 03,80,00 hdr 00
(II) PCI: 03:01:0: chip 1131,7134 card 16be,0003 rev 01 class 04,80,00 hdr 00
(II) PCI: 03:03:0: chip 1106,3044 card 1462,091d rev 80 class 0c,00,10 hdr 00
(II) PCI: 03:04:0: chip 11c1,048c card 11c1,044c rev 03 class 07,80,00 hdr 00
(II) PCI: 03:06:0: chip 1106,3106 card 1462,091c rev 8b class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc8000000 - 0xd7ffffff (0x10000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x50000000 - 0x500fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xd8000000 - 0xd80fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] rev 0, Mem @ 0xc8000000/27, 0xd0030000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] Secondary rev 0, Mem @ 0xd0020000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd8003000 - 0xd80030ff (0x100) MX[b]
[1] -1 0 0xd8002000 - 0xd80020ff (0x100) MX[b]
[2] -1 0 0xd8001000 - 0xd80017ff (0x800) MX[b]
[3] -1 0 0xd8000000 - 0xd80003ff (0x400) MX[b]
[4] -1 0 0xd8104000 - 0xd81043ff (0x400) MX[b]
[5] -1 0 0xd8100000 - 0xd8103fff (0x4000) MX[b]
[6] -1 0 0xd0030000 - 0xd003ffff (0x10000) MX[b](B)
[7] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[8] -1 0 0x0000d300 - 0x0000d3ff (0x100) IX[b]
[9] -1 0 0x0000d200 - 0x0000d2ff (0x100) IX[b]
[10] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[11] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[b]
[12] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[13] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[14] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[b]
[15] -1 0 0x0000e600 - 0x0000e607 (0x8) IX[b]
[16] -1 0 0x0000e500 - 0x0000e503 (0x4) IX[b]
[17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[19] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[20] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[b]
[21] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[22] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd0020000 - 0xd002ffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8003000 - 0xd80030ff (0x100) MX[b]
[1] -1 0 0xd8002000 - 0xd80020ff (0x100) MX[b]
[2] -1 0 0xd8001000 - 0xd80017ff (0x800) MX[b]
[3] -1 0 0xd8000000 - 0xd80003ff (0x400) MX[b]
[4] -1 0 0xd8104000 - 0xd81043ff (0x400) MX[b]
[5] -1 0 0xd8100000 - 0xd8103fff (0x4000) MX[b]
[6] -1 0 0xd0030000 - 0xd003ffff (0x10000) MX[b](B)
[7] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[8] -1 0 0x0000d300 - 0x0000d3ff (0x100) IX[b]
[9] -1 0 0x0000d200 - 0x0000d2ff (0x100) IX[b]
[10] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[11] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[b]
[12] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[13] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[14] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[b]
[15] -1 0 0x0000e600 - 0x0000e607 (0x8) IX[b]
[16] -1 0 0x0000e500 - 0x0000e503 (0x4) IX[b]
[17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[19] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[20] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[b]
[21] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[22] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd0020000 - 0xd002ffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8003000 - 0xd80030ff (0x100) MX[b]
[5] -1 0 0xd8002000 - 0xd80020ff (0x100) MX[b]
[6] -1 0 0xd8001000 - 0xd80017ff (0x800) MX[b]
[7] -1 0 0xd8000000 - 0xd80003ff (0x400) MX[b]
[8] -1 0 0xd8104000 - 0xd81043ff (0x400) MX[b]
[9] -1 0 0xd8100000 - 0xd8103fff (0x4000) MX[b]
[10] -1 0 0xd0030000 - 0xd003ffff (0x10000) MX[b](B)
[11] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[12] -1 0 0xd0020000 - 0xd002ffff (0x10000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000d300 - 0x0000d3ff (0x100) IX[b]
[16] -1 0 0x0000d200 - 0x0000d2ff (0x100) IX[b]
[17] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[18] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[b]
[19] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[20] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[21] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[b]
[22] -1 0 0x0000e600 - 0x0000e607 (0x8) IX[b]
[23] -1 0 0x0000e500 - 0x0000e503 (0x4) IX[b]
[24] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[26] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[27] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[29] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.28.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9250/9200 Series (RV280 5961),
RADEON 9250/9200 Series (RV280 5962),
RADEON 9250/9200 Series (RV280 5964), FireMV 2200 PCI (RV280 5965),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300/X550 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 SE (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600/X550 Series (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 GTO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), FireGL V7200 (R480 5D50),
RADEON X850 XT (R480 5D52), RADEON X850 (R481 4B48),
RADEON X850 XT (R481 4B49), RADEON X850 SE (R481 4B4A),
RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), RADEON X700 XT (RV410 5E4A),
RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
RADEON X700 (RV410 5E4D), RADEON X700/X550 Series (RV410 5E4F),
MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653),
MOBILITY RADEON X700 XL (M26-XC 564F),
RADEON 9000/9100 IGP Series (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000 IGP (RL300MB 7835),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 XT (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 Series (R520 7108),
RADEON X1800 Series (R520 7109), RADEON X1800 Series (R520 710A),
RADEON X1800 Series (R520 710B), RADEON X1800 Series (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1600 Series (RV515 7140), RADEON X1300 Series (RV515 7142),
MOBILITY FireGL (M54 GL 7144), MOBILITY RADEON X1400 (M54 7145),
RADEON X1300 Series (RV515 7146), MOBILITY RADEON X1300 (M52 7149),
MOBILITY RADEON X1300 (M52 714A), RADEON X1300 Series (RV515 714D),
RADEON X1300 Series (RV515 714E), FireGL V3300 (RV515 7152),
RADEON X1300 Series (RV515 715E), RADEON X1300 (RV516 7180),
RADEON X1600 Series (RV516 7181), RADEON X1300 (RV516 7183),
MOBILITY RADEON X1450 (M64P 7186), RADEON X1300 (RV516 7187),
MOBILITY RADEON X1350 (M62P 718B),
MOBILITY RADEON X1350 (M62CSP 718C),
MOBILITY RADEON X1450 (M64CSP 718D),
MOBILITY RADEON X1350 (M62S 7196), RADEON X1900 (R580 7240),
RADEON X1900 (R580 7243), RADEON X1900 (R580 7244),
RADEON X1900 (R580 7245), RADEON X1900 (R580 7246),
RADEON X1900 (R580 7247), RADEON X1900 (R580 7248),
RADEON X1900 (R580 7249), RADEON X1900 (R580 724A),
RADEON X1900 (R580 724B), RADEON X1900 (R580 724C),
RADEON X1900 (R580 724D), FireStream 2U (R580 724E),
FireStream 2U (R580 724F), RADEON X1600 Series (RV530 71C0),
RADEON X1600 Series (RV530 71C2), MOBILITY FireGL V5200 (M56 71C4),
MOBILITY RADEON X1600 (M56 71C5),
RADEON X1600 Series (RV530 LE 71C6),
RADEON X1600 Series (RV530 VE 71CE), FireGL V3400 (RV530 71D2),
MOBILITY RADEON X1700 (M66-XT 71D6), FireGL V5200 (RV530 71DA),
RADEON X1600 Series (RV530 SE 71DE), RADEON X1600 XT (RV535 XT 71C1),
MOBILITY FireGL V5250 (M66GL 71D4),
MOBILITY RADEON X1700 (M66-P 71D5), RADEON Xpress 1200 (RS600 7941),
RADEON Xpress 1200 (RS600 7942)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.28.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.28g1
(II) ATI Proprietary Linux Driver Build Date: Aug 17 2006 09:28:12
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.28.1.1.2.3-driver-lnx-x86-x86_64-287161
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON X700 PRO (RV410 5E4B) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8003000 - 0xd80030ff (0x100) MX[b]
[5] -1 0 0xd8002000 - 0xd80020ff (0x100) MX[b]
[6] -1 0 0xd8001000 - 0xd80017ff (0x800) MX[b]
[7] -1 0 0xd8000000 - 0xd80003ff (0x400) MX[b]
[8] -1 0 0xd8104000 - 0xd81043ff (0x400) MX[b]
[9] -1 0 0xd8100000 - 0xd8103fff (0x4000) MX[b]
[10] -1 0 0xd0030000 - 0xd003ffff (0x10000) MX[b](B)
[11] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[12] -1 0 0xd0020000 - 0xd002ffff (0x10000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000d300 - 0x0000d3ff (0x100) IX[b]
[16] -1 0 0x0000d200 - 0x0000d2ff (0x100) IX[b]
[17] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[18] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[b]
[19] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[20] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[21] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[b]
[22] -1 0 0x0000e600 - 0x0000e607 (0x8) IX[b]
[23] -1 0 0x0000e500 - 0x0000e503 (0x4) IX[b]
[24] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[26] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[27] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[29] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e2bd8
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8003000 - 0xd80030ff (0x100) MX[b]
[5] -1 0 0xd8002000 - 0xd80020ff (0x100) MX[b]
[6] -1 0 0xd8001000 - 0xd80017ff (0x800) MX[b]
[7] -1 0 0xd8000000 - 0xd80003ff (0x400) MX[b]
[8] -1 0 0xd8104000 - 0xd81043ff (0x400) MX[b]
[9] -1 0 0xd8100000 - 0xd8103fff (0x4000) MX[b]
[10] -1 0 0xd0030000 - 0xd003ffff (0x10000) MX[b](B)
[11] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[12] -1 0 0xd0020000 - 0xd002ffff (0x10000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000d300 - 0x0000d3ff (0x100) IX[b]
[19] -1 0 0x0000d200 - 0x0000d2ff (0x100) IX[b]
[20] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[21] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[b]
[22] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[23] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[24] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[b]
[25] -1 0 0x0000e600 - 0x0000e607 (0x8) IX[b]
[26] -1 0 0x0000e500 - 0x0000e503 (0x4) IX[b]
[27] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
[28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[29] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[30] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[b]
[31] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[32] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[33] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON X700 PRO (RV410 5E4B)" (Chipset = 0x5e4b)
(--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1780)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc8000000
(--) fglrx(0): MMIO registers at 0xd0030000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.7
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2003, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV410
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.28.8
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MED Model: 8963 Serial#: 301029791
(II) fglrx(0): Year: 2003 Week: 4
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.85
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.638 redY: 0.325 greenX: 0.276 greenY: 0.596
(II) fglrx(0): blueX: 0.143 blueY: 0.066 whiteX: 0.283 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 100 vid: 26721
(II) fglrx(0): #5: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) fglrx(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 35.5 MHz Image Size: 355 x 266 mm
(II) fglrx(0): h_active: 720 h_sync: 756 h_sync_end 828 h_blank_end 936 h_border: 0
(II) fglrx(0): v_active: 400 v_sync: 401 v_sync_end 404 v_blanking: 446 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 98 kHz, PixClock max 200 MHz
(II) fglrx(0): Monitor name: MD1998PB
(II) fglrx(0): Serial No: 301029791
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 425/452MHz @ 0Hz [enable load balancing]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 56 modes found for primary display.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 0)
(**) fglrx(0): *Mode "1600x1200": 202.5 MHz (scaled from 0.0 MHz), 93.8 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072
(**) fglrx(0): Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 169.2 MHz (scaled from 0.0 MHz), 97.0 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1280x1024" 169.20 1280 1376 1512 1744 1024 1025 1028 1078 +hsync
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
(**) fglrx(0): *Mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 143.5 MHz (scaled from 0.0 MHz), 91.5 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1024x768" 113.30 1024 1096 1208 1392 768 769 772 814 +hsync
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.18 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720" 55.85 960 1008 1104 1248 720 721 724 746 +hsync
(**) fglrx(0): *Mode "864x648": 45.1 MHz (scaled from 0.0 MHz), 40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648" 45.08 864 904 992 1120 648 649 652 671 +hsync
(**) fglrx(0): *Mode "856x480": 31.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "856x480" 31.73 856 872 960 1064 480 481 484 497 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): Default mode "800x600": 83.9 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz
(II) fglrx(0): Modeline "800x600" 83.94 800 856 944 1088 600 601 604 643 +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): *Mode "704x480": 26.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "704x480" 26.24 704 720 792 880 480 481 484 497 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) fglrx(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (112, 112)
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Mode "1600x1200": 202.5 MHz (scaled from 0.0 MHz), 93.8 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072
(**) fglrx(0): Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 169.2 MHz (scaled from 0.0 MHz), 97.0 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1280x1024" 169.20 1280 1376 1512 1744 1024 1025 1028 1078 +hsync
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
(**) fglrx(0): *Mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 143.5 MHz (scaled from 0.0 MHz), 91.5 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1024x768" 113.30 1024 1096 1208 1392 768 769 772 814 +hsync
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.18 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720" 55.85 960 1008 1104 1248 720 721 724 746 +hsync
(**) fglrx(0): *Mode "864x648": 45.1 MHz (scaled from 0.0 MHz), 40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648" 45.08 864 904 992 1120 648 649 652 671 +hsync
(**) fglrx(0): *Mode "856x480": 31.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "856x480" 31.73 856 872 960 1064 480 481 484 497 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): Default mode "800x600": 83.9 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz
(II) fglrx(0): Modeline "800x600" 83.94 800 856 944 1088 600 601 604 643 +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): *Mode "704x480": 26.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "704x480" 26.24 704 720 792 880 480 481 484 497 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) fglrx(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x00000c80
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0030000 - 0xd003ffff (0x10000) MX[b]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd8003000 - 0xd80030ff (0x100) MX[b]
[7] -1 0 0xd8002000 - 0xd80020ff (0x100) MX[b]
[8] -1 0 0xd8001000 - 0xd80017ff (0x800) MX[b]
[9] -1 0 0xd8000000 - 0xd80003ff (0x400) MX[b]
[10] -1 0 0xd8104000 - 0xd81043ff (0x400) MX[b]
[11] -1 0 0xd8100000 - 0xd8103fff (0x4000) MX[b]
[12] -1 0 0xd0030000 - 0xd003ffff (0x10000) MX[b](B)
[13] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[14] -1 0 0xd0020000 - 0xd002ffff (0x10000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[18] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000d300 - 0x0000d3ff (0x100) IX[b]
[22] -1 0 0x0000d200 - 0x0000d2ff (0x100) IX[b]
[23] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[24] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[b]
[25] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[26] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[27] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[b]
[28] -1 0 0x0000e600 - 0x0000e607 (0x8) IX[b]
[29] -1 0 0x0000e500 - 0x0000e503 (0x4) IX[b]
[30] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
[31] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[32] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[33] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[b]
[34] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[35] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): UMM Bus area: 0xc8954000 (size=0x0768c000)
(II) fglrx(0): UMM area: 0xc8954000 (size=0x0768c000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb768e000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.28.8
(II) fglrx(0): Date: Aug 17 2006
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.17-10-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): [pcie] 131072 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc8000000 FBMappedSize: 0x00954000
(II) fglrx(0): Splitting WC range: base: 0xc8000000, size: 0x954000
(II) fglrx(0): Splitting WC range: base: 0xc8800000, size: 0x154000
(II) fglrx(0): Splitting WC range: base: 0xc8900000, size: 0x54000
(II) fglrx(0): Splitting WC range: base: 0xc8940000, size: 0x14000
(==) fglrx(0): Write-combining range (0xc8950000,0x4000)
(==) fglrx(0): Write-combining range (0xc8940000,0x14000)
(==) fglrx(0): Write-combining range (0xc8900000,0x54000)
(==) fglrx(0): Write-combining range (0xc8800000,0x154000)
(==) fglrx(0): Write-combining range (0xc8000000,0x954000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,1528)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1600 x 328
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Interrupt handler installed at IRQ 169.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+fr+level3(ralt_switch)" };
xkb_geometry { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!donc , j'ai bien la 3 D ,
pour tester Beryl , je tape beryl-manager dans une session en cours ,j'ai alors des fenêtres qui scintillent comme si une recherche n'aboutissait pas et j'ai ce fameux message d'erreur:
XGL Absent, checking for NVIDIA
Nvidia Absent, assuming AIGLX
beryl: No composite extension
merci pour tes idées et à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#21 Le 16/11/2006, à 00:25
- grisouille
Re : (résolu) duo beryl emeralda
essaye en mettant le BusID dans la section device
Driver "fglrx"
BusID "PCI:1:0:0"
d'après ce message d'erreur
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) foundle pb doit venir de là.
Ps :as tu essayé de configurer le serveur x avec cette commande
sudo dpkg-reconfigure xserver-xorg
parce que c'est peut-être normal d'avoir un xorg comme ça après cette commande : aticonfig --initial
et que quand ça marche peu importe mais dans ton cas de n'avoir qu'une section device, monitor et screen, serait nettement plus lisible et clair.
j'insiste là dessus, mais j'ai l'impression qu'il te met ta carte sur 2 bus différents et beryl se lancerait sur la 1° (?)
(--) PCI:*(1:0:0) ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] rev 0, Mem @ 0xc8000000/27, 0xd0030000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] Secondary rev 0, Mem @ 0xd0020000/16Ps2: si ton pb n'est pas là, désolé, j'espère ne pas t'avoir trop embrouillé
Hors ligne
#22 Le 16/11/2006, à 01:52
- albatros00
Re : (résolu) duo beryl emeralda
salut grisouille,
j'ai mis le bus ID dans la section DEVICE avec le pilote "fgrlx" , plus rien n'a démarré et j'ai restauré le xorg.conf avec le backup.
je pense qu'il y a un pb. en amont:
tou au début,
edgy ne s'est pas installé sur le PC car la CG n'était pas reconnue.
donc pour pouvoir lancer edgy , j'ai dû commencer par faire un
sudo dpkg-reconfigure xserver-xorg et j'ai fait une config. manuelle de ma carte avec le seul pilote accepté : VESA !
ça a permis de lancer edgy mais je n'avais pas la 3 D >>>>> j'ai fait sudo apt-get install xorg-driver fglrx fglrx-control libqt3-mt
suivi d'un aticonfig --initial , puis une vint enfin une 3 D à 12000fps.
à la suite de ça , j'ai installé Beryl mais c'est un flop...
je t'ai exactement décrit le chemin parcouru pour arriver a mon xorg.conf.
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
on frôle p-être la solution?
mais ça devient trop pointu pour mon niveau de connaissance de linux.
à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#23 Le 16/11/2006, à 10:49
- G-rom
Re : (résolu) duo beryl emeralda
non non tout le monde chez ATI à ce message d'erreur ou presque, c'est parceque tu dois avoir 2 sorties vidéo sur ta carte ou un truc du genre.
il n'y a pas d'erreur conséquente dans ton log.
Moi je te conseille de ne pas mettre beryl-manager dans les trucs de démarrage de ta session mais plutot de lancer ta session XGL puis une fois celle ci bien lancée et sans bug de taper beryl-manager dans un terminal.
montre moi aussi ton script de démarrage xgl peut etre qu'il y a une erreur dedans.
Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.
Hors ligne
#24 Le 17/11/2006, à 01:54
- albatros00
Re : (résolu) duo beryl emeralda
voici ce script:
startxgl.sh
#!/bin/sh
Xgl -fullscreen :1 -ac -accel glx:pbuffer -accel xv:pbuffer &
sleep 4
export DISPLAY=:1
exec dbus-launch --exit-with-session gnome-session
j'ai trouvé ce script ici
http://doc.ubuntu-fr.org/applications/xgl/gnome
on avance lentement mais on avance....
merci pour ta patience et à+
Exilé sur le sol au milieu des nuages,
Ses ailes de géant l'empêchent de marcher
Hors ligne
#25 Le 17/11/2006, à 05:32
- PDemong
Re : (résolu) duo beryl emeralda
Bon alors je viens de lire ton log Xorg.0.log et le premier truc j'y remarque, c'est :
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software renderingJ'ai pas d'idée pour ce message d'erreur vue que dans le xorg.conf que tu fournies, il n'y a aucune référence à aiglx nulle part...
Puis tu as les messages d'erreur suivants :
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argumentCeux-là sont très facile à régler. Va dans ton xorg.conf et supprimer les sections qui suivent :
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionPuis va dans la section "ServerLayout" et supprime les 3 lignes suivantes :
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"Je ne suis pas convaincu par les messages du driver fglrx sur ta config : je me demande si avec un pilote libre tu aurais les mêmes soucis...
Désolé, j'ai pas l'impression de pouvoir t'aider plus. Bonne chance!
Hors ligne