Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 17/11/2006, à 10:21

tarte en pion

(Résolu) Installation de "radeon" sur une Edgy toute fraîche!

Bonjour!

J'ai installé un Edgy tout frais^^ (et donc pas de trace de fglrx, donc le problème ne vient pas de là).
J'aurai voulu avoir l'accèlération graphique sur ma Ati Radeon X300SE, donc puisque mes essais sous Dapper de fglrx n'ont pas été concluants j'ai décidé d'utiliser le driver "radeon".
J'ai fait tout comme écrit dans le tuto épinglé et dans la doc, mais X ne pouvait pas démarrer... je vous donne mon xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "Extensions"
   Option "RENDER" "Enable"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
	Driver		"radeon"
	BusID		"PCI:5:0:0"
	#options qui boostent
	Section "Device"
        Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
        Option "AccelDFS"    "1" # mettez à 0 si vous avez une carte AGP
#       Option 	"AGPMode" "4" # Décommentez si vous avez une carte AGP
#       Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
        Option "GARTSize" "64"
        Option "RingSize" "8"
        Option "BufferSize" "2"
        Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
        Option "ColorTiling" "1"
        Option "EnableDepthMoves" "yes"
        Option "UseFBDev" "false"
        Option "RenderAccel" "true" # Enable the hardware render acceleration
        Option "mtrr" "on"
        Option	"SubPixelOrder" "none"
        Option "DPMS"
        Option "DynamicClocks" "on"

EndSection

Section "Monitor"
	Identifier	"BenQ FP71E"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
	Monitor		"BenQ FP71E"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Une idée? Merci! smile

Dernière modification par tarte en pion (Le 17/11/2006, à 15:13)

Hors ligne

#2 Le 17/11/2006, à 11:29

SEG

Re : (Résolu) Installation de "radeon" sur une Edgy toute fraîche!

Quelques idéées en passant...
Tu peux rajouter des infos dans ton xorg.conf, celles que j'ai dans le miens avec une 9600XT.


Dans Section "Monitor"

HorizSync xxx - xxx
VertRefresh xxx - xxx
(avec les fréquences de ton écran bien sûr)


Ala fin de Section "Screen"

EndSubSection
  Option "AddARGBGLXVisuals" "true"
EndSection


Dans Section "ServerLayout"

Option "AIGLX" "true"


Voilà, ça peut toujours servir wink
P.S. sauvegardes ton xorg.conf avant, on ne sait jamais big_smile

Dernière modification par SEG (Le 17/11/2006, à 11:31)


"J'aimerais comprendre mais, à défaut, je veux que ça fonctionne..."

Hors ligne

#3 Le 17/11/2006, à 12:21

tarte en pion

Re : (Résolu) Installation de "radeon" sur une Edgy toute fraîche!

Euh... en fait je croyais en avoir besoin pour Wine et XGL mais j'ai remarqué que pour Wine ce n'était pas la peine. Peut-être pour XGL?

Hors ligne