Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 26/11/2006, à 11:47

jerome71

Linux bloqué après install firmware wifi par fw cutter

Bonjour à touts,
Je poste mon problème ici car je n'obtiens pas de réponse sur le forum internet&réseaux.
Voici le lien :
http://forum.ubuntu-fr.org/viewtopic.php?id=79419
Merci de m'aider.

Hors ligne

#2 Le 26/11/2006, à 12:15

doohan

Re : Linux bloqué après install firmware wifi par fw cutter

salut !

j'ai la meme carte une bcm4318, j'ai utilisé cette methode : http://www.ubuntuforums.org/showthread.php?t=197102
ndiswrapper fonctionne niquel en wpa avec network-manager
tu peu voir aussi ce tuto de davidB21
http://forum.ubuntu-fr.org/viewtopic.php?id=60870

Hors ligne

#3 Le 26/11/2006, à 13:04

jerome71

Re : Linux bloqué après install firmware wifi par fw cutter

Merci d'avoir répondu.
Je suis sous edgy au fait. J'ai lu qu'il faut blacklister le pilote fourni par défaut dans le package.
Sinon quelqu'un pourrait me donner un driver .inf ou .sys qui me correspond parfaitement ?

Je répète que ma diode wifi s'est allumée et que Linux est bloqué. En ce moment je boot du live-CD.
D'ailleurs j'aimerais avoir accès à ma partition Linux pour virer les firmwares mais pas moyen.

Dernière modification par jerome71 (Le 26/11/2006, à 13:06)

Hors ligne

#4 Le 26/11/2006, à 13:25

doohan

Re : Linux bloqué après install firmware wifi par fw cutter

pour acceder a ta partition creer un repertoire dans media:

sudo mkdir /media/hda

ensuite monte ta partition

sudo mount -t ext3 /dev/hda1 /media/hda

tu peu ensuite allé virer le firmware ensuite demonte la partition et reboot

sudo umount /media/hda

le premier lien te propose de telecharger ndiswrapper avec les pilotes SYS et INF, il te suffit de lancer le script ndiswrapper_setup

je t'assure que ça fonctionne niquel pour cette carte

Dernière modification par doohan (Le 26/11/2006, à 13:26)

Hors ligne

#5 Le 26/11/2006, à 14:38

jerome71

Re : Linux bloqué après install firmware wifi par fw cutter

Apparemment j'ai un problème de Kernel.
Voici le message :
Installing ndiswrapper-1.8...
Done...
Driver bcmwl5.inf is not installed.Use -l to list installed drivers
Driver bcmwl5a.inf is not installed.Use -l to list installed drivers
mkdir: Ne peut créer le répertoire `/tmp/bcm4318-setup': Le fichier existe.
You appear to have a 64bit system...installing the 64bit drivers...
Done...
Adding drivers to ndiswrapper...
Done...
Gathering wireless card information...
Done...


----------------------------------



You should probably install an wireless connection manager
The best choices are
                        network-manager OR wifi-radar
Strengths/weaknesses of network-manager:
+ Is able to use WPA, WEP, or any other kind of standard encryption
+ Easy to change networks
- Asks for keyring password on boot to connect to encrypted networks
- No network profiles, or at least you are unable to see them
- Is impossible to connect to a wired and wireless network at the same time
- No static IPs
- Network strength does not work

Strengths/weakness of wifi-radar:
+ Works 99% of the time
+ Static IPs or DHCP
+ Supports WEP
+ Network strength sort of works
+ Doesn't need password at boot
+ Able to connect to wired and wireless at the same time
- No WPA

After you have connected to the internet,
I would recommend installing one of these programs.
To install network-manager, open Synaptic (Ubuntu) or Adept (Kubuntu)
and find the package network-manager-gnome, and install it.
To install wifi-radar, open Synaptic (Ubuntu) or Adept (Kubuntu)
and find the package wifi-radar, and install it.


----------------------------------


Script completed.
If your wireless light is on, give your internet a shot.
If you are interested in install a connection manager, please
scroll up and read the pros and cons of a couple.
You will have to connect to use the internet now.
This can be accomplished (in Ubuntu) by
going to System / Administration / Networking,
and configuring the wireless card by selecting the network name.
If something is not working, please try rebooting.
If you need more help, please post ~/Desktop/bcm4318-setup.log on
the forum thread where you downloaded it from for help.
WE HAVE DETECTED THAT YOU ARE USING EDGY EFT WITH AN
********
*INCOMPATIBLE* *64BIT* *KERNEL*
********
NDISWRAPPER WILL NOT WORK UNTIL YOU PERFORM THESE STEPS.
PLEASE REBOOT YOUR COMPUTER NOW
AND SELECT THE 2.6.17-7-generic KERNEL FROM GRUB.
----------------------------------
If you can't select the 2.6.17-7-generic kernel from GRUB,
you may download the 2.6.18.1 kernel from:
http://ubuntuforums.org/showpost.php?p= … tcount=668
(the link above can be clicked, so no need to retype)
Your problem will be solved.



C'est un peu long, désolé.
Je boot bien sur le Kernel 2.6.17-10 generic.

Hors ligne

#6 Le 26/11/2006, à 14:55

doohan

Re : Linux bloqué après install firmware wifi par fw cutter

fait un :

ndiswrapper -l

c'est pour voir si il y a deja un pilote installé ?

tu es sous edgy 64-bit ? je suis pas tres fort en anglais, mais je pense qu'il demande les pilotes 64-bit !!

Hors ligne

#7 Le 26/11/2006, à 15:05

jerome71

Re : Linux bloqué après install firmware wifi par fw cutter

J'ai intallé le kernel 1.18.1 comme conseillé et j'ai booté dessus.
ndiswrapper -l me dit que le driver et le hardware sont présents.
En revanche mon interface (eth1) a disparu du menu "réseau".

Dernière modification par jerome71 (Le 26/11/2006, à 15:06)

Hors ligne

#8 Le 26/11/2006, à 15:22

doohan

Re : Linux bloqué après install firmware wifi par fw cutter

verifie que ndiswrapper est bien chargé

lsmod | grep ndiswrapper

pour charger ndiswrapper au demmarage

sudo gedit /etc/modules

mettre dans le fichier

ndiswrapper

et aussi le module 43xx

lsmod | grep bcm43xx

ce dernier ne doit pas etre chargé, si c'est le cas il faut le blacklisté

 sudo gedit /etc/modprobe.d/blacklist

rajoute ça a la fin du fichier

blacklist bcm43xx

tu peu redemarrer

Dernière modification par doohan (Le 26/11/2006, à 15:25)

Hors ligne

#9 Le 26/11/2006, à 20:56

jerome71

Re : Linux bloqué après install firmware wifi par fw cutter

Pas moyen.
Des que je blacklist le bcm43xx, mon periph wifi ne se charge plus au demarrage.

Hors ligne

#10 Le 27/11/2006, à 11:10

jerome71

Re : Linux bloqué après install firmware wifi par fw cutter

J'ai finalement installé Débian et mon wifi fonctionne parfaitement grâce à fw cutter.

Hors ligne