Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1626 Le 25/11/2012, à 19:19

Didier-T

Re : [Conky] Alternative à weather.com (2)

viper69 a écrit :

Non car je ne sais pas ou il faut les installer....

Je pense avoir trouvé...; le répertoire est caché et il s'appelle .fonts.


vous confirmé

ensuite il faut mettre a jour ta base de police

fc-cache -f -v

Hors ligne

#1627 Le 25/11/2012, à 21:07

viper69

Re : [Conky] Alternative à weather.com (2)

ok c est fait ... mais rien de mieux

Que penses tu du fait que lorsque je veux utiliser un icone de mon bureau le conky disparait.... pour ne plus revenir comme si il avait ete killer


Viper69
J'ai ouvert les fenêtres - J'ai vu que l'on pouvait être libre
Le manuel disait "Nécessite Windows XP ou mieux". J'ai donc installé Linux.
Ubuntu depuis 7.04 / Laptop: PressarioC60 / Bureau: CQ5335 / Minipc:LDLC Mercure ML1-C1-2-H1

Hors ligne

#1628 Le 25/11/2012, à 21:19

Didier-T

Re : [Conky] Alternative à weather.com (2)

viper69 a écrit :

ok c est fait ... mais rien de mieux

Que penses tu du fait que lorsque je veux utiliser un icone de mon bureau le conky disparait.... pour ne plus revenir comme si il avait ete killer

Pour les textes, il vas falloir que tu joue sur les voffset.

En fait il joue à cache cache.
Il faut modifier le type de fenêtre, sa dépend de la distribution.
tu as plusieurs choix pour own_window_type
normal
desktop
dock
panel
override

Hors ligne

#1629 Le 25/11/2012, à 21:38

viper69

Re : [Conky] Alternative à weather.com (2)

alors la sa va se compliquer.... je vais faire chauffer les neurones.
Tout se trouve dans le conkyrc_meteo_lua
pour le cache cache sa doit se trouver là own_window_type desktop
   
....reste à faire 4 tests  (par contre quelle est la différence ?) Tu confirmes?

Par contre je vois pas ou se trouve la ligne modifiée ....
la distro c'est ubuntu biensur...

Dernière modification par viper69 (Le 25/11/2012, à 21:40)


Viper69
J'ai ouvert les fenêtres - J'ai vu que l'on pouvait être libre
Le manuel disait "Nécessite Windows XP ou mieux". J'ai donc installé Linux.
Ubuntu depuis 7.04 / Laptop: PressarioC60 / Bureau: CQ5335 / Minipc:LDLC Mercure ML1-C1-2-H1

Hors ligne

#1630 Le 26/11/2012, à 06:36

Didier-T

Re : [Conky] Alternative à weather.com (2)

viper69 a écrit :

alors la sa va se compliquer.... je vais faire chauffer les neurones.
Tout se trouve dans le conkyrc_meteo_lua
pour le cache cache sa doit se trouver là own_window_type desktop
   
....reste à faire 4 tests  (par contre quelle est la différence ?) Tu confirmes?

Par contre je vois pas ou se trouve la ligne modifiée ....
la distro c'est ubuntu biensur...

c'est la ligne que tu site qu'il faut modifier
own_window_type desktop

Voici comment je procéderais a ta place.
Lancer le conky
voir si il se cache
tuer le conky
modifier la valeur desktop par une autre
recommencer

Hors ligne

#1631 Le 26/11/2012, à 15:44

ragamatrix

Re : [Conky] Alternative à weather.com (2)

@Tous
Encore une variante, inspirée du "weathercircle" mais avec Meteo-Lua ce qui donne:
"Chronoweathercircle"
chronoweathercircle
chronoweathercircle
bigscreen

Dernière modification par ragamatrix (Le 26/11/2012, à 15:45)

Hors ligne

#1632 Le 26/11/2012, à 17:31

viper69

Re : [Conky] Alternative à weather.com (2)

ok
Bon alors des nouvelles du front.... La valeur override semble être prometteuse.

Reste un offset à bricoler.... Celui du texte du second cadre expliquant le temps de part et d autre de la lunaison.
Tant que j y suis le texte de la lunaison se devine plus qu'il ne se lit donc même combat...

J ai donc les trois textes du second cadre à descendre sous les illustrations.

Question: Ou se trouvent ces offset dans le conky?


Viper69
J'ai ouvert les fenêtres - J'ai vu que l'on pouvait être libre
Le manuel disait "Nécessite Windows XP ou mieux". J'ai donc installé Linux.
Ubuntu depuis 7.04 / Laptop: PressarioC60 / Bureau: CQ5335 / Minipc:LDLC Mercure ML1-C1-2-H1

Hors ligne

#1633 Le 26/11/2012, à 22:45

viper69

Re : [Conky] Alternative à weather.com (2)

C'est fait
mon premier conky tourne parfaitement.
Merci a tous


Viper69
J'ai ouvert les fenêtres - J'ai vu que l'on pouvait être libre
Le manuel disait "Nécessite Windows XP ou mieux". J'ai donc installé Linux.
Ubuntu depuis 7.04 / Laptop: PressarioC60 / Bureau: CQ5335 / Minipc:LDLC Mercure ML1-C1-2-H1

Hors ligne

#1634 Le 27/11/2012, à 13:57

ragamatrix

Re : [Conky] Alternative à weather.com (2)

Salut;
Je vous poste le code pour celui ci si cela vous inpire.:
CCWC

ChronoClear.lua:

 --[[ multiple analogue clocks by mrpeachy - 18 Jun 2012
 21 Jun 2012 - Chronograph modifications by Sector11
 22 Jun 2012 - again with mrpeachy's help day names, numbers and month names
 12 Nov 2012 - memory leak plugged - mrpeachy
 14 Nov 2012 - Personnalisation - Didier-T (forum Ubuntu.fr)

use in conkyrc

lua_load /path/Chronograph.lua
lua_draw_hook_pre main
TEXT

]]

require 'cairo'
--Position et taille horloge
local init={
center_x=175,
center_y=175,
radius=170, -- do not touch
lang="French", --English or Spanish or French
hour=12, --12 or 24
second=true, --true or false
line=false, --hand secondes true or false
handday=false, --hand day true or false
handdaynum=false, --hand day number true or false
handmonth=false, --hand month true or false
color=0xf50002, --color for day, day number and month if none hand
alpha=1 --alpha for day, day number and month if none hand
}

local colr, colg, colb, cola=rgb_to_r_g_b(init.color,init.alpha)

function conky_main()
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
local extents=cairo_text_extents_t:create()
tolua.takeownership(extents)
---[##drawings_new_hands
--this function caluculates coordinates for a point around a circle
function pt(px,py,prad,pdeg)--px,py=center coordinates for circle, prad=radius,pdeg is position in degrees, 0 is top
local ppo=(math.pi/180)*pdeg
local px1=px+prad*(math.sin(ppo))
local py1=py-prad*(math.cos(ppo))
return px1,py1--returns coordinates, use in main function like this, x,y=pt(px,py,prad,pdeg)
end

--this function draws hands
function hands(clock_centerx,clock_centery,degrees,length,hand_center_width,hand_mid_width,hand_end_width,distance_to_mid)
--draw_middle
--calc start point
xs,ys=pt(clock_centerx,clock_centery,hand_center_width,degrees-90)
cairo_move_to(cr,xs,ys)
x1,y1=pt(clock_centerx,clock_centery,length*distance_to_mid,degrees-(hand_mid_width/2))
cairo_line_to (cr,x1,y1)
x2,y2=pt(clock_centerx,clock_centery,length,degrees)
cairo_arc(cr,x2,y2,hand_end_width,(degrees+180)*(math.pi/180),(degrees)*(math.pi/180))
--cairo_line_to (cr,x2,y2)
x3,y3=pt(clock_centerx,clock_centery,length*distance_to_mid,degrees+(hand_mid_width/2))
cairo_line_to (cr,x3,y3)
--calc end point
xe,ye=pt(clock_centerx,clock_centery,hand_center_width,degrees+90)
cairo_line_to (cr,xe,ye)
cairo_arc(cr,clock_centerx,clock_centery,hand_center_width,(degrees)*(math.pi/180),(degrees+180)*(math.pi/180))
cairo_fill(cr)
end

-- ########################################################
-- SETTINGS AREA
-- local cpu=conky_parse("${cpu}")
-- local red-1=conky_parse("${image ~/Conky/images/red_1.png -p 0,0 -s 35x35}")

local clock_type_A=init.hour -- Large Main 24 HR Clock

-- ###### CLOCK SETTINGS ##################################
-- SET BORDER OPTIONS FOR "New_weather_proto" ########################
local clock_border_width=1
-- set color and alpha for clock border
local cbr,cbg,cbb,cba=1,1,1,1  -- full opaque white
-- gap from clock border to minute marks
local b_to_m=1

-- ########################################################
-- ### START DIAL B ### Top - Week Day Names Dial #########
-- DIAL POSITION FOR TEXT
local center_x=init.center_x-20
local center_y=init.center_y-78
local radius=55
-- FONT
cairo_select_font_face (cr, "Harlow Solid Italic", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 11)
cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)	-- (cr,1,1,1,1)
-- TABLE OF TEXT -- in order
if init.lang == "English" then text_days={"Sun","Mon","Tue","Wed","Thr","Fri","Sat",}	end	-- English
if init.lang == "Spanish" then text_days={"Dom","Lun","Mar","Mie","Jue","Vie","Sab",}	end	-- Spanish
if init.lang == "French" then text_days={"Dim","Lun","Mar","Mer","Jeu","Ven","Sam",}	end	-- French
local day_number=tonumber(os.date("%w"))
if init.handday == true then
  for i=1,7 do
    -- work out points
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=35
  for i=1,7 do
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
  -- DRAW HAND -- snaps to current day of week
  local hand_length=30
  local point=(math.pi/180)*((360/7)*(day_number))
  local x=0+hand_length*(math.sin(point))
  local y=0-hand_length*(math.cos(point))
  local hand_width=2
  cairo_move_to (cr,center_x,center_y)
  cairo_line_to (cr,center_x+x,center_y+y)
  cairo_stroke (cr)
else
  for i=1,7 do
    -- work out points
    if day_number == i-1 then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,169/255,169/255,169/255,1)--Days ---181, 224, 255
    end
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle####Points days
  local radius=35
  for i=1,7 do
    if day_number == i-1 then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
    end
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=5-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end

end
-- ### END DIAL B #########################################

-- ########################################################
-- ### START DIAL C ### Right - Month Names Dial ##########
-- DIAL POSITION FOR TEXT
local center_x=init.center_x+80
local center_y=180
local radius=50
-- FONT
cairo_select_font_face (cr, "Harlow Solid Italic", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 11)
cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)	-- (cr,1,1,1,1)
-- TABLE OF TEXT -- in order
if init.lang == "English" then text_days={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec",} end -- English
if init.lang == "Spanish" then text_days={"Ene","Feb","Mar","Abr","May","Jun","Jul","Ago","Sep","Oct","Nov","Dic",} end -- Spanish
if init.lang == "French" then text_days={"Jan","Fév","Mar","Avr","Mai","Jui","Jul","Aôu","Sep","Oct","Nov","Déc",} end -- French
local this_month=tonumber(os.date("%m"))

if init.handmonth == true then
  for i=1,12 do
    -- OUTTER POINTS POSiTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=32
  for i=1,12 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
  -- DRAW HAND -- snaps to current month
  local hand_length=28 --radius for this calculation
  local point=(math.pi/180)*((360/12)*(this_month-1))
  local x=0+hand_length*(math.sin(point))
  local y=0-hand_length*(math.cos(point))
  cairo_move_to (cr,center_x,center_y)
  cairo_line_to (cr,center_x+x,center_y+y)
  cairo_stroke (cr)
else
  for i=1,12 do
    if this_month == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,169/255,169/255,169/255,1)
    end
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=-3-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=32
  for i=1,12 do
    if this_month == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
    end
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end

end
-- ### END CLOCK C ########################################

-- ########################################################
-- ### START DIAL D ### Left - Day Numbers Dial ###########
-- GET NUMBER OF DAYS IN CURRENT MONTH
-- calculate Feb, then set up table
year4num=os.date("%Y")
t1=os.time({year=year4num,month=03,day=01,hour=00,min=0,sec=0});
t2=os.time({year=year4num,month=02,day=01,hour=00,min=0,sec=0});
if init.hour == 12 then
  febdaynum=tonumber((os.difftime(t1,t2))/(12*60*60))
else
  febdaynum=tonumber((os.difftime(t1,t2))/(24*60*60))
end
-- MONTH TABLE
monthdays={31,febdaynum,31,30,31,30,31,31,30,31,30,31}
this_month=tonumber(os.date("%m"))
number_days=monthdays[this_month]
-- TEXT positioning
local center_x=init.center_x-45
local center_y=init.center_y+62
local radius=55
cairo_select_font_face (cr, "Felix Titling", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 10)
cairo_set_source_rgba (cr,1,1,1,1) --(cr,245/255,242/255,143/255,1) -- (cr,1,1,1,1)
local this_day=tonumber(os.date("%d"))
if init.handdaynum == true then
  for i=1,number_days do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    --only print even numbers
    if math.mod(i, 2) == 0 then
      --set text when even
      text=string.format("%02d",i) --formats numbers to double digits
    else
      --set text when odd
      text=""
    end--odd even matching
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=40
  for i=1,number_days do
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
  -- DRAW HAND -- snaps to current DAY
  local hand_length=35--radius for this calculation
  local point=(math.pi/180)*((360/number_days)*(this_day-1))
  local x=0+hand_length*(math.sin(point))
  local y=0-hand_length*(math.cos(point))
  cairo_move_to (cr,center_x,center_y)
  cairo_line_to (cr,center_x+x,center_y+y)
  cairo_stroke (cr)
else
  for i=1,number_days do
    if this_day == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,169/255,169/255,169/255,1)
    end
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    --only print even numbers
    if math.mod(i, 2) == 0 then
      --set text when even
      text=string.format("%02d",i) --formats numbers to double digits
    else
      --set text when odd
      text=""
    end--odd even matching
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=40
  for i=1,number_days do
    if this_day == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,219/255,168/255,255/255,1)--points day numbers
    end
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
end
-- ### END CLOCK D ########################################

-- ########################################################
-- ### START CLOCK E ######################################
-- MARKS AROUND CLOCK E -- Bottom - 12 HR Clock
local number_marks_E=12
-- set mark length
local m_length_E=0
-- set mark width
local m_width_E=0
-- set mark line cap type
local m_cap=CAIRO_LINE_CAP_ROUND
-- set mark color and alpha,red blue green alpha
local mr,mg,mb,ma=1,1,0,1-- opaque white
-- SETUP HOUR HANDS #######################################
-- CLOCK E HOUR HAND
-- set length of hour hand
hh_length_E=25
-- set hour hand width
hh_width_E=2
-- set hour hand line cap
hh_cap=CAIRO_LINE_CAP_ROUND
-- set hour hand color
hhr,hhg,hhb,hha=1,1,0,1-- fully opaque white
-- SETUP MINUTE HANDS #####################################
-- CLOCK E MINUTE HAND SETUP
-- set length of minute hand
mh_length_E=35
-- set minute hand width
mh_width_E=2
-- set minute hand line cap
mh_cap=CAIRO_LINE_CAP_ROUND
-- set minute hand color
mhr,mhg,mhb,mha=1,1,0,1-- fully opaque white
-- SETUP SECOND HANDS #####################################
-- CLOCK E SECOND HAND SETUP
-- set length of seconds hand
sh_length_E=32
-- set hour hand width
sh_width_E=1
-- set hour hand line cap
sh_cap=CAIRO_LINE_CAP_ROUND
-- set seconds hand color
shr,shg,shb,sha=1,0,0,1-- fully opaque red
-- Borders weather circles############################
-- Border SETTINGS1
clock_radius=160
clock_centerx=init.center_x
clock_centery=init.center_y+390
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS2
clock_radius=40
clock_centerx=init.center_x-10
clock_centery=init.center_y+285
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- CLOCK E ###### 12 HR TIME ##############################
-- Border SETTINGS3
clock_radius=40
clock_centerx=init.center_x+80
clock_centery=init.center_y+340
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- CLOCK E ###### 12 HR TIME ##############################
-- Border SETTINGS3
clock_radius=40
clock_centerx=init.center_x+80
clock_centery=init.center_y+440
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS4
clock_radius=40
clock_centerx=init.center_x-10
clock_centery=init.center_y+495
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS5
clock_radius=40
clock_centerx=init.center_x-105
clock_centery=init.center_y+390
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- DRAW MARKS
-- stuff that can be moved outside of the loop, needs only be set once
-- calculate end and start radius for marks
m_end_rad=clock_radius-b_to_m
m_start_rad=m_end_rad-m_length_E
-- set line cap type
cairo_set_line_cap  (cr, m_cap)
-- set line width
cairo_set_line_width (cr,m_width_E)
-- set color and alpha for marks
cairo_set_source_rgba (cr,mr,mg,mb,ma)
-- START LOOP FOR SECOND MARKS
for i=1,number_marks_E do
-- drawing code using the value of i to calculate degrees
-- calculate start point for 12/24 hour mark
radius=m_start_rad
point=(math.pi/180)*((i-1)*(360/number_marks_E))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set start point for line
cairo_move_to (cr,clock_centerx+x,clock_centery+y)
-- calculate end point for 12/24 hour mark
radius=m_end_rad
point=(math.pi/180)*((i-1)*(360/number_marks_E))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set path for line
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- draw the line-- MARKS AROUND CLOCK A
cairo_stroke (cr)
end-- of for loop
-- SET MARKS ##############################################
-- MARKS AROUND CLOCK A -- Large Main 24 HR Clock
local number_marks_A=init.hour
-- set mark length
local m_length_A=0
-- set mark width
local m_width_A=0
-- set mark line cap type
local m_cap=CAIRO_LINE_CAP_ROUND
-- set mark color and alpha,red blue green alpha
local mr,mg,mb,ma=1,1,1,1 -- opaque white
-- SETUP HOUR HANDS #######################################
-- CLOCK A HOUR HAND
-- set length of hour hand
hh_length_A=130
-- set hour hand width
hh_width_A=3
-- set hour hand line cap
hh_cap=CAIRO_LINE_CAP_ROUND
-- set hour hand color
hhr,hhg,hhb,hha=1,1,1,.5-- fully opaque white
-- SETUP MINUTE HANDS #####################################
-- CLOCK A MINUTE HAND SETUP
-- set length of minute hand
mh_length_A=145
-- set minute hand width
mh_width_A=2
-- set minute hand line cap
mh_cap=CAIRO_LINE_CAP_ROUND
-- set minute hand color
mhr,mhg,mhb,mha=1,1,1,.5-- fully opaque white
-- SETUP SECOND HANDS #####################################
-- CLOCK A SECOND HAND SETUP
-- set length of seconds hand
sh_length_A=150
-- set hour hand width
sh_width_A=2
-- set hour hand line cap
sh_cap=CAIRO_LINE_CAP_ROUND
-- set seconds hand color
shr,shg,shb,sha=1,0,0,1-- fully opaque red
-- CLOCK A ###### 12 HR TIME ##############################
-- Border  SETTINGS
clock_radius=0
clock_centerx=init.center_x
clock_centery=init.center_y
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,cbr,cbg,cbb,cba)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- DRAW MARKS
-- stuff that can be moved outside of the loop, needs only be set once
-- calculate end and start radius for marks
m_end_rad=clock_radius-b_to_m
m_start_rad=m_end_rad-m_length_A
-- set line cap type
cairo_set_line_cap  (cr, m_cap)
-- set line width
cairo_set_line_width (cr,m_width_A)
-- set color and alpha for marks
cairo_set_source_rgba (cr,mr,mg,mb,ma)
-- START LOOP FOR HOUR MARKS
for i=1,number_marks_A do
-- drawing code using the value of i to calculate degrees
-- calculate start point for 12/24 hour mark
radius=m_start_rad
point=(math.pi/180)*((i-1)*(360/number_marks_A))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set start point for line
cairo_move_to (cr,clock_centerx+x,clock_centery+y)
-- calculate end point for 12/24 hour mark
radius=m_end_rad
point=(math.pi/180)*((i-1)*(360/number_marks_A))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set path for line
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- draw the line
cairo_stroke (cr)
end-- of for loop
-- HOUR MARKS
-- TIME CALCULATIONS CLOCK A
if clock_type_A==12 then
hours=tonumber(os.date("%I"))
-- convert hours to seconds
h_to_s=hours*60*60
elseif clock_type_A==24 then
hours=tonumber(os.date("%H"))
-- convert hours to seconds
h_to_s=hours*60*60
end
minutes=tonumber(os.date("%M"))
-- convert minutes to seconds
m_to_s=minutes*60
-- get current seconds
seconds=tonumber(os.date("%S"))
-- DRAW HOUR HAND
-- get hours minutes seconds as just seconds
hsecs=h_to_s+m_to_s+seconds
-- calculate degrees for each second
hsec_degs=hsecs*(360/(60*60*clock_type_A))-- use equation ~ eliminate decimals
-- set radius to calculate hand points
radius=hh_length_A
-- set up line attributes and draw line
cairo_set_line_width (cr,hh_width_A)
cairo_set_source_rgba (cr,hhr,hhg,hhb,hha)
cairo_set_line_cap  (cr, hh_cap)
--NEW HAND DRAWING CODE ##################################################
--call hand drawing function
hands(
clock_centerx,--string or coodinate for clock center x
clock_centery,--string or coodinate for clock center y
hsec_degs,--string or value for hand degrees
hh_length_A,--string or value for hand length (radius)
2,--set hand center width in pixels
10,--set hand mid width in degrees
0,--set hand end width in pixels, 0=a point
0.8--number from 0 to 1 as a propotion of total hand length, ie 0.5 is exact middle distance
)

--#########################################################################
-- DRAW MINUTE HAND
-- get minutes and seconds just as seconds
msecs=m_to_s+seconds
-- calculate degrees for each second
msec_degs=msecs*0.1
-- set radius to calculate hand points
radius=mh_length_A
-- set start line coordinates, the center of the circle
cairo_move_to (cr,clock_centerx,clock_centery)
-- calculate coordinates for end of minute hand
point=(math.pi/180)*msec_degs
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- describe the line we will draw
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- set up line attributes and draw line
cairo_set_line_width (cr,mh_width_A)
cairo_set_source_rgba (cr,mhr,mhg,mhb,mha)
cairo_set_line_cap  (cr, mh_cap)
--NEW HAND DRAWING CODE ##################################################
--call hand drawing function
hands(
clock_centerx,--string or coodinate for clock center x
clock_centery,--string or coodinate for clock center y
msec_degs,--string or value for hand degrees
mh_length_A,--string or value for hand length (radius)
2,--set hand center width in pixels
6,--set hand mid width in degrees
0,--set hand end width in pixels, 0=a point
0.75--number from 0 to 1 as a propotion of total hand length, ie 0.5 is exact middle distance
)
-- DRAW SECOND HAND

--[[
-- calculate degrees for each second
sec_degs=seconds*6
-- set radius to calculate hand points
radius=sh_length_A
-- set start line coordinates, the center of the circle
cairo_move_to (cr,clock_centerx,clock_centery)
-- calculate coordinates for end of seconds hand
point=(math.pi/180)*sec_degs
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))BOLD
-- describe the line we will draw
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- set up line attributes
cairo_set_line_width (cr,sh_width_A)
cairo_set_source_rgba (cr,shr,shg,shb,sha)
cairo_set_line_cap  (cr, sh_cap)
cairo_stroke (cr)
]]
-- ####################################################################
local center_x=init.center_x
local center_y=init.center_y
local radius=init.radius-5
cairo_select_font_face (cr, "Felix Titling", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 15)
cairo_set_source_rgba (cr,219/255,168/255,255/255,1) --(cr,194/255,204/255,255/255,1)	-- (cr,1,1,1,1)
-- TABLE OF TEXT -- in order
if init.hour == 12 then 
  text_days={"12","01","02","03","04","05","06","07","08","09","10","11",}
  for i=1,12 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=150
  for i=1,12 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
end
if init.hour == 24 then 
  text_days={"00","01","02","03","04","05","06","07","08","09","10","11","12","13","14","15","16","17","18","19","20","21","22","23",}
  for i=1,24 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/24)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=150
  for i=1,24 do
    local point=(math.pi/180)*((360/24)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
end

-- part of a second hand
--position
--get seconds value
local seconds=tonumber(os.date("%S"))
--calculate rotation of second hand in degrees
if init.line == true then
  local arc=(math.pi/180)*((360/60)*seconds)
  --calculate point 1
  local radius1=140
  local x1=0+radius1*math.sin(arc)
  local y1=0-radius1*math.cos(arc)
  --calculate point 2
  local radius2=158
  local x2=0+radius2*math.sin(arc)
  local y2=0-radius2*math.cos(arc)
  --draw line connecting points-- 255, 138, 255
  cairo_move_to (cr, center_x+x1,center_y+y1)
  cairo_line_to (cr, center_x+x2, center_y+y2)
  cairo_set_source_rgba (cr,255/255,0/255,0/255,1)
  cairo_stroke (cr)
end
-- ####################################################################
-- POSITION FOR TEXT HOUR NUMBERS
--affiche secondes
  if init.hour == 12 and init.second == true then
    text_days={"","1","2","3","4","","6","7","8","9","","11","12","13","14","","16","17","18","19","","21","22","23","24","","26","27","28","29","","31","32","33","34","","36","37","38","39","","41","42","43","44","","46","47","48","49","","51","52","53","54","","56","57","58","59","",} 
    -- INNER POINTS POSITION, radius smaller than text circle
    cairo_set_source_rgba (cr,1,1,1,1)
    cairo_select_font_face (cr, "monofur", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
    for i=1,60 do
      local radius=150
      local point=(math.pi/180)*((360/60)*(i-1))
      local x=0+radius*(math.sin(point))
      local y=0-radius*(math.cos(point))
      if seconds == i-1 then
        cairo_set_source_rgba (cr,46/255,0/255,217/255,1)---point for seconds---
      else
        if i-1 == 0 or i-1 == 5 or i-1 == 10 or i-1 == 15 or i-1 == 25 or i-1 == 30 or i-1 == 35 or i-1 == 40 or i-1 == 45 or i-1 == 50 or i-1 == 55 then
          cairo_set_source_rgba (cr,1,1,1,1)---points for hours
        else
          cairo_set_source_rgba (cr,219/255,168/255,255/255,1)---points for minutes
        end
      end
      cairo_arc (cr,center_x+x,center_y+y,1/2,0,2*math.pi)
      cairo_stroke (cr)
    end
    radius=radius-3
    cairo_set_font_size (cr, 10)
    for i=1,60 do
      -- OUTTER POINTS POSTION FOR TEXT
      local point=(math.pi/180)*((360/60)*(i-1))
      local x=0+radius*(math.sin(point))
      local y=0-radius*(math.cos(point))
      -- CALCULATE CENTRE OF TEXT
      local text=text_days[i]--gets text from table
      if seconds == tonumber(text) then
        cairo_set_source_rgba (cr,0,0,1,1)
      else
        cairo_set_source_rgba (cr,252/255,124/255,0/255,1)
      end
      --local extents=cairo_text_extents_t:create()
      cairo_text_extents(cr,text,extents)
      local width=extents.width
      local height=extents.height
      cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
      cairo_show_text (cr, text)
      cairo_stroke (cr)
    end
  end
-- Fin affiche secondes
-- FONT

-- ########################################################
cairo_stroke (cr)
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
end-- end main function

function rgb_to_r_g_b(col,alp) -- ONLY NEED ONE COPY OF THIS FUNCTION
  return ((col / 0x10000) % 0x100) / 255, ((col / 0x100) % 0x100) / 255, (col % 0x100) / 255, alp
end 

ConkyChronoClear :

  # To use #! in a conky use: ${exec echo '#!'}
# ${font DS\-Digital:bold:size=24}
# OS: ${pre_exec lsb_release -d | cut -c14-50}
# killall conky && conky -c ~/Conky/S11_Chronograph.conky &
# Thank you - mrpeachy

###  Begin Window Settings  ##################################################
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky
own_window_colour gray
own_window_class Conky
own_window_title Chronograph

# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes

### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type normal
# own_window_argb_visual yes

### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
# own_window_argb_value 0

minimum_size 350 750   #Taille minimum (px) ; largeur / hauteur
maximum_width 350       #Largeur maximum (px)

gap_x 15 #15        ### left &right
gap_y 60        ### up & down

alignment tr #ml
####################################################  End Window Settings  ###
###  Font Settings  ##########################################################
# Use Xft (anti-aliased font and stuff)
use_xft yes
xftfont CorporateMonoExtraBold:size=9

# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes

draw_shades no
default_shade_color black

draw_outline no # amplifies text if yes
default_outline_color black

uppercase no
######################################################  End Font Settings  ###
###  Color Settings  #########################################################
default_shade_color gray
default_outline_color black

default_color DCDCDC #220 220 220	Gainsboro
color0 8FBC8F #143 188 143	DarkSeaGreen
color1 778899 #119 136 153	LightSlateGray
color2 FF8C00 #255 140   0	DarkOrange
color3 7FFF00 #127 255   0	Chartreuse
color4 FFA07A #255 160 122	LightSalmon
color5 FFDEAD #255 222 173	NavajoWhite
color6 00BFFF #  0 191 255	DeepSkyBlue
color7 00FFFF #  0 255 255	Cyan
color8 FFFF00 #255 255   0	Yellow
color9 B22222 #178  34  34	FireBrick
#####################################################  End Color Settings  ###
###  Borders Section  ########################################################
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 1
border_outer_margin 1
# border width
border_width 1
# graph borders
draw_graph_borders no #no
#default_graph_size 15 40
#####################################################  End Borders Secton  ###
###  Miscellaneous Section  ##################################################
# Boolean value, if true, Conky will be forked to background when started.
background yes

# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer none

# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
text_buffer_size 256

# Subtract (file system) buffers from used memory?
no_buffers yes

# change GiB to G and MiB to M
short_units yes

# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2

#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
#  (default is 16384 bytes)
# max_user_text 16384

# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
# temperature_unit Fahrenheit

lua_load ~/développement/ConkyChronoClear/draw_bg.lua
lua_load ~/développement/ConkyChronoClear/ChronoClear.lua
lua_draw_hook_post main

update_interval 1
# -- Déclaration template -- #
	template0 ${image ~/.conky/conky38/script/images/\1 -p \2 -s \3} # -- images fond -- #
	template1 ${lua Meteo_\1 \2 \3 \4 \5 \6} # -- gestion météo --#
	template2 ${lua_parse Meteo_\1 \2 \3 \4 60 \5} # -- icônes météo -- \2=répertoire icônes \3=position \4=taille \5=jour (pour les prévisions) #
	template3 ${lua Lune_\1} 
	template4 ${lua_parse Images_\1 \2 \3 60 \4} # -- Appelle image -- \2=position \3=taille \4=jour (pour les prévisions) #
	lua_load ~/.conky/conky38/script/meteo.lua
	lua_startup_hook init ~/.conky/conky38/script/meteo.cfg
TEXT
#### Lancement du script récupérant les données météo ####
#${template1 horsligne}
${template1 Maj}
##### Affichage infos vent ######
${voffset 100}${color ffe595}${font Felix Titling:style=Bold:size=8}${goto 50}${template1 VentDirP}          
${voffset 28}${color red}${font Monotype Corsiva:style=Bold:size=10}${goto 50}${template1 Jour_VentRafales} km/h
##### Affichage Prévision H+2,4,8 #####
${voffset -90}${font Ubuntu :size=10:style=bold}${color OrangeRed3}${goto 145}${template1 huitHeures_Heure 2}h${voffset 13}${goto 147}${color FF1493}${template1 huitHeures_Temp 2}°${voffset 69}${goto 245}${color OrangeRed3}${template1 huitHeures_Heure 4}h${voffset 13}${goto 247}${color FF1493}${template1 huitHeures_Temp 4}°${voffset 35}${goto 115}${color OrangeRed3}${template1 huitHeures_Heure 8}h${voffset 13}${goto 120}${color FF1493}${template1 huitHeures_Temp 8}°
##### Heure mise à jour #####
${voffset 55}${color ffe595}${font Arial Rounded MT:size=7}${alignc}Relevé à :${template1 Heure}h${template1 Minute}
## Affichage Dates et conditions J+ ####################################################################
${voffset 145}${goto 65}${font URW Chancery L:style=Bold:size=12}${color FEEFEF}${template1 Jour %A 2}${voffset 60}${goto 155}${font URW Chancery L:style=Bold:size=12}${color FEEFEF}${template1 Jour %A 3}${voffset 80}${goto 155}${font URW Chancery L:style=Bold:size=12}${color FEEFEF}${template1 Jour %A 4}${voffset 55}${goto 65}${font URW Chancery L:style=Bold:size=12}${color FEEFEF}${template1 Jour %A 5}
## LUNE INFOS ##
${voffset -125}${goto 121}${font URW Chancery L:style=Bold:size=10}${color lightblue}Lune: ${template3 ephemerides}
##### Affichage temperature #####
${voffset -100}${goto 150}${font Ubuntu :size=10:style=bold}${color red}${template1 Jour_Temp 2}°${color white} | ${color lightblue}${template1 Nuit_Temp 2}°${voffset 55}${goto 240}${color red}${template1 Jour_Temp 3}°${color white} | ${color lightblue}${template1 Nuit_Temp 3}°${voffset 100}${goto 240}${color red}${template1 Jour_Temp 4}°${color white} | ${color lightblue}${template1 Nuit_Temp 4}°${voffset 55}${goto 150}${color red}${template1 Jour_Temp 5}°${color white} | ${color lightblue}${template1 Nuit_Temp 5}°
${voffset -435}${goto 200}${color green3}${font Arial Rounded MT:size=7}Méteo-Lua:${lua conky_Version}
#### Icones ####
${template2 IconeV ~/.conky/conky38/meteo/icones/vent 50,128 30x30}
${image /tmp/lune.png -p 35,530 -s 65x65 -f 60}
${template2 huitHeures_IconeM ~/.conky/conky38/meteo/icones 105,68 100x66 2}
${template2 huitHeures_IconeM ~/.conky/conky38/meteo/icones 205,148 100x66 4}
${template2 huitHeures_IconeM ~/.conky/conky38/meteo/icones 80,200 100x66 8}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 120,430 86x52 2}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 120,635 86x52 5}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 212,480 86x52 3}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 212,580 86x52 4}
#${lua conky_draw_bg 20 0 55 0 590 0x000000 0.4}##rectangleBackground
${lua conky_draw_bg 175 0 0 350 350 0x000000 0.3}##1stBigCircle
${lua conky_draw_bg 162 13 403 324 324 0x000000 0.3}##2ndBigCircle
${lua conky_draw_bg 70 85 35 140 140 0x000000 0.3}
${lua conky_draw_bg 59 201 125 118 118 0x000000 0.3}
${lua conky_draw_bg 63 66 174 126 126 0x000000 0.3}
${lua conky_draw_bg 42 28 523 84 84 0x000000 0.3}
${lua conky_draw_bg 42 123 418 84 84 0x000000 0.3}
${lua conky_draw_bg 42 123 628 84 84 0x000000 0.3}
${lua conky_draw_bg 42 213 572 84 84 0x000000 0.3}
${lua conky_draw_bg 42 213 473 84 84 0x000000 0.3}
${offset -100}  

Hors ligne

#1635 Le 28/11/2012, à 11:43

ragamatrix

Re : [Conky] Alternative à weather.com (2)

Salut;
Je suis intérressé par un autre script (que j'essaie de modifier) qui comme le Méteo-Lua affiche une rose des vents, un barometre et un quadrant affichant la vitesse du vent.Celui qui affiche la vitesse du vent indique la conversion des différentes unités de mesures, et ça je trouve que c'est la CLASSE !:cool:
J'ai fait du ménage dans le code afin de n'avoir seulement que les quadrants, quelques conditions courantes et la prévision du jour prochain.La chose que je voudrais serait de rajouter deux icones (une pour la condition courante et l'autre pour le jour prochain) et c'est là que je bloque....Je crois qu'il n'est pas possible d'afficher des icones météo avec ce script.Si quelqu'un a une idée et de meilleures compétences en lua ?
immerchrono
immerchrono

Dernière modification par ragamatrix (Le 28/11/2012, à 11:44)

Hors ligne

#1636 Le 28/11/2012, à 12:46

Phyllinux

Re : [Conky] Alternative à weather.com (2)

ragamatrix a écrit :

Salut;
Je suis intérressé par un autre script (que j'essaie de modifier) qui comme le Méteo-Lua affiche une rose des vents, un barometre et un quadrant affichant la vitesse du vent.Celui qui affiche la vitesse du vent indique la conversion des différentes unités de mesures, et ça je trouve que c'est la CLASSE !:cool:
J'ai fait du ménage dans le code afin de n'avoir seulement que les quadrants, quelques conditions courantes et la prévision du jour prochain.La chose que je voudrais serait de rajouter deux icones (une pour la condition courante et l'autre pour le jour prochain) et c'est là que je bloque....Je crois qu'il n'est pas possible d'afficher des icones météo avec ce script.Si quelqu'un a une idée et de meilleures compétences en lua ?
http://pix.toile-libre.org/?img=1354017299.png
immerchrono

Bonjour,
Petite question toute bête : Pourquoi ne lances tu pas, en plus de ton script, le meteo.lua pour utiliser les icônes ?
Tu peux très bien faire appel à plusieurs scripts dans le même conky, et ton problème sera réglé lol


The ship is sinking normally...

Hors ligne

#1637 Le 28/11/2012, à 12:58

ragamatrix

Re : [Conky] Alternative à weather.com (2)

Phyllinux a écrit :
ragamatrix a écrit :

Salut;
Je suis intérressé par un autre script (que j'essaie de modifier) qui comme le Méteo-Lua affiche une rose des vents, un barometre et un quadrant affichant la vitesse du vent.Celui qui affiche la vitesse du vent indique la conversion des différentes unités de mesures, et ça je trouve que c'est la CLASSE !:cool:
J'ai fait du ménage dans le code afin de n'avoir seulement que les quadrants, quelques conditions courantes et la prévision du jour prochain.La chose que je voudrais serait de rajouter deux icones (une pour la condition courante et l'autre pour le jour prochain) et c'est là que je bloque....Je crois qu'il n'est pas possible d'afficher des icones météo avec ce script.Si quelqu'un a une idée et de meilleures compétences en lua ?
http://pix.toile-libre.org/?img=1354017299.png
immerchrono

Bonjour,
Petite question toute bête : Pourquoi ne lances tu pas, en plus de ton script, le meteo.lua pour utiliser les icônes ?
Tu peux très bien faire appel à plusieurs scripts dans le même conky, et ton problème sera réglé lol

Merci
Maintenant il y a la lumière à tous les étages...:lol:
Quand c'est près je poste...
Je pourrais ainsi mettre aussi les conditions du jour suivant en Français...L'essentiel était d'y penser;Bien vu wink
A+

Hors ligne

#1638 Le 28/11/2012, à 17:10

ragamatrix

Re : [Conky] Alternative à weather.com (2)

@Phyllinux
Merci j'ai suivi tes conseils:
immerchrono
conky:

 ##############################################
#  Settings
##############################################
max_specials 10000
max_user_text 1500000
background yes
use_xft yes
#xftfont Sans:size=12
#xftalpha 1
font Arial Rounded MT:size=7
total_run_times 0
own_window yes
own_window_argb_visual yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 680 720
maximum_width 680
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
default_color white
default_shade_color black
default_outline_color white
alignment top_left
gap_x 10
gap_y 10
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
color1 86acad #darker blue
color2 b1c9c9 #lighter blue
text_buffer_size 100000
top_name_width 10
update_interval 1

# -- Déclaration template -- #
	template0 ${image ~/.conky/conky38/script/images/\1 -p \2 -s \3} # -- images fond -- #
	template1 ${lua Meteo_\1 \2 \3 \4 \5 \6} # -- gestion météo --#
	template2 ${lua_parse Meteo_\1 \2 \3 \4 60 \5} # -- icônes météo -- \2=répertoire icônes \3=position \4=taille \5=jour (pour les prévisions) #
	template3 ${lua Lune_\1} 
	template4 ${lua_parse Images_\1 \2 \3 60 \4} # -- Appelle image -- \2=position \3=taille \4=jour (pour les prévisions) #
	lua_load ~/.conky/conky38/script/meteo.lua
	lua_startup_hook init ~/.conky/conky38/script/meteo.cfg


lua_load ~/.conky/conky24/thermometer3.lua
lua_load ~/.conky/conky24/draw_bg.lua

TEXT
${lua conky_draw_bg 250 0 150 500 500 0x000000 0.6}
${lua conky_weather}
#${lua conky_draw_bg corner_radius x_position y_position width height color alpha}
#### Lancement du script récupérant les données météo ####
#${template1 horsligne}
${template1 Maj}
##### Affichage conditions météo #####
${voffset 375}${goto 235}${font :italic:size=10}${color white}${template1  CondMeteo}
${voffset 2}${goto 235}${font style=Bold:size=13}${if_match ${template1 TempAct}<5}${color lightblue}${blink ${template1 TempAct}°}${else}${color white}${template1 TempAct}°${endif}
## Affichage différents paramètres ###################################################
${voffset 5}${goto 270}${font}${color4}Soleil: ${color0}${template1 HLeverSoleil 1}:${template1 MLeverSoleil 1} / ${template1 HCoucherSoleil 1}:${template1 MCoucherSoleil 1} (${template1 HDureeJour 1}h ${template1 MDureeJour 1})
${voffset 2}${goto 270}${font}${color4}UV: ${color0}${template1  Uv 1} 
${voffset 2}${goto 270}${font}${color4}Couverture nuageuse: ${color0}${template1  CouvNuage 1}% 
${voffset 2}${goto 270}${font}${color4}Visibilité: ${color0}${template1  Visibilite 1} km
${voffset 2}${goto 270}${font}${color4}Vent: ${color FF0000}${template1 VentDirP} ${template1 VentForce} km/h
${voffset 2}${goto 270}${font}${color4}Pression: ${color0}${template1 Pression 1} mb
${voffset 2}${goto 270}${font}${color4}Quantité précipitation: ${color0}${template1  QPrec 1} mm
${voffset 2}${goto 270}${font}${color4}Vent Rafales max: ${color FF0000}${template1 Jour_VentRafales 1} Km/h
${voffset 2}${goto 270}${font :italic:size=6}${color4}Dernier relevé: ${color 1E90FF}${template1 Heure}:${template1 Minute}
${voffset 2}${goto 270}${color green3}${font :italic:size=6}Méteo-Lua:${lua conky_Version}
##next 3days##
${voffset -90}${goto 130}${font}${color4}${template1 Jour %A 2}: ${color red}${template1 Jour_Temp 2}°${color white} | ${color lightblue}${template1 Nuit_Temp 2}°
${voffset 15}${goto 130}${font}${color4}${template1 Jour %A 3}: ${color red}${template1 Jour_Temp 3}°${color white} | ${color lightblue}${template1 Nuit_Temp 3}°
${voffset 15}${goto 130}${font}${color4}${template1 Jour %A 4}: ${color red}${template1 Jour_Temp 4}°${color white} | ${color lightblue}${template1 Nuit_Temp 4}°
${voffset 15}${goto 130}${font}${color4}${template1 Jour %A 5}: ${color red}${template1 Jour_Temp 5}°${color white} | ${color lightblue}${template1 Nuit_Temp 5}°
#${template2 huitHeures_IconeM ~/.conky/conky38/meteo/icones 210,505 43x26 2}
#${template2 huitHeures_IconeM ~/.conky/conky38/meteo/icones 210,532 43x26 4}
#${template2 huitHeures_IconeM ~/.conky/conky38/meteo/icones 210,558 43x26 8}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 210,505 43x26 2}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 210,532 43x26 3}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 210,558 43x26 4}
${template2 Jour_IconeM ~/.conky/conky38/meteo/icones 210,585 43x26 4}

Thermometer3.lua:

 --[[weather display by mrpeachy nov 2011
version 4
-cleaned up a bit
-temp scale changing
-set mid point temp for color change
-added forecast display
-added wind speed guage
-added hi lo thermometers
]]
--#########################################################################################################
--SETUP--SETUP--SETUP--SETUP--SETUP--SETUP--SETUP--SETUP--SETUP--SETUP--SETUP
secs=300--set update interval
web="http://www.intellicast.com/Local/Forecast.aspx?unit=C&location=SZXX0014"--insert unit=C& after? for C
--get web address by going to the intellicast site and entering your location in the box
--for version 3 you must get click on "Extended Forecast" to get the necessary address
units="C"--set units for C or F
mid=75--this is the temp at which temp scale is yellow, ie mid point in color change scale
----###weathericons="~/v9000/additional_files/weathericons/"
--#########################################################################################################

require 'cairo'
------------------------------------------------------------------------------
function string:split(delimiter)
local result = { }
local from  = 1
local delim_from, delim_to = string.find( self, delimiter, from  )
while delim_from do
table.insert( result, string.sub( self, from , delim_from-1 ) )
from  = delim_to + 1
delim_from, delim_to = string.find( self, delimiter, from  )
end
table.insert( result, string.sub( self, from  ) )
return result
end
--------------------------------------------------------------------------------

function conky_weather()
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
local updates=tonumber(conky_parse('${updates}'))
if updates>5 then
local timer=(updates %secs)+1
if timer==1 or updates==6 then
local f=io.popen("curl '"..web.."' | grep -A62 'As of ' | gawk -F'>' -v RS='</' 'RT{print $NF}' | sed -e 's/^[ \t]*//' -e '/^$/d' -e 's/&deg;//g' -e 's/%//g' -e 's/  / /g' -e 's/Thunderstorms/T.Storms/g'")
local data1=f:read("*a")
f:close()
local data2=string.split(data1,"\n")
local data={}
for i,v in pairs(data2) do
if string.find(v,"[%a%d]")~=nil then
table.insert(data,data2[i])
end
end
--##############################################
--current
local wdr=string.split(data[25]," ")
now={con=string.gsub(data[2],"[\r\n]",""),tmp=string.gsub(data[4],units,""),flk=string.gsub(data[5],"Feels Like: ",""),wch=data[7],cel=data[10],hid=data[12],vis=string.gsub(data[15],"[ %a]",""),dpt=data[17],wsp=string.gsub(data[20],"[ %a]",""),wdg=(wdr[1]),wdi=string.gsub(wdr[2],"[%(%)\n\r]",""),wgs=string.gsub(data[30],"[ %a]",""),hum=data[22],prs=string.gsub(data[27],"\"","")}
--############################################
--forecast
local f=io.popen("curl '"..web.."' | grep -A554 'View the Calendar Forecast' | gawk -F'>' -v RS='<' 'RT{print $NF}' | sed -e 's/^[ \t]*//' -e 's/&deg;//g' -e 's/  / /g' -e 's/%//g' -e 's/&deg//g' -e 's/Thunderstorms/T.Storms/g'")
local fdata1=f:read("*a")
f:close()
local fdata=string.split(fdata1,"\n")
local fdata2={}
for i,v in pairs(fdata) do
if string.find(v,"[%a%d]")~=nil then
table.insert(fdata2,fdata[i])
end
end
local uvi=string.split(fdata2[20]," ")
local wsp=string.split(fdata2[32]," ")
local wdr=string.split(fdata2[34]," ")
day1={day=fdata2[2],con=fdata2[3],hih=fdata2[4],low=fdata2[5],sri=fdata2[8],sst=fdata2[10],mri=fdata2[12],mst=fdata2[14],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[22],ppt=fdata2[24],snw=fdata2[26],cld=fdata2[28],mph=fdata2[30],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day2
local uvi=string.split(fdata2[53]," ")
local wsp=string.split(fdata2[65]," ")
local wdr=string.split(fdata2[67]," ")
day2={day=fdata2[35],con=fdata2[36],hih=fdata2[37],low=fdata2[38],sri=fdata2[41],sst=fdata2[43],mri=fdata2[45],mst=fdata2[47],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[55],ppt=fdata2[57],snw=fdata2[59],cld=fdata2[61],mph=fdata2[63],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day3
local start=68
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day3={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day4
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day4={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day5
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day5={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day6
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day6={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day7
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day7={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=wmh,wkm=wkm,wkt=wkt,wdg=wdg,wdi=wdi}
--day8
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day8={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day9
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day9={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
--day10
local start=start+29
local uvi=string.split(fdata2[start+14]," ")
local wsp=string.split(fdata2[start+26]," ")
local wdr=string.split(fdata2[start+28]," ")
day10={day=fdata2[start],con=fdata2[start+1],hih=fdata2[start+2],low=fdata2[start+3],sri=fdata2[start+5],sst=fdata2[start+7],mri=fdata2[start+9],mst=fdata2[start+11],uvn=uvi[1],uvt=string.gsub(uvi[2],"[%(%)]",""),hum=fdata2[start+16],ppt=fdata2[start+18],snw=fdata2[start+20],cld=fdata2[start+22],mph=fdata2[start+24],wmh=string.gsub(wsp[1],"[%a]",""),wkm=string.gsub(wsp[2],"[%a%(,]",""),wkt=string.gsub(wsp[3],"[%a%)]",""),wdg=wdr[1],wdi=string.gsub(wdr[2],"[%(%)\n\r]","")}
end--timer section
display(now,day1,day2,day3,day4,day5,day6,day7,day8,day9,day10)
--################################################################3
end-- if updates>5
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
return ""
end-- end main function

function display(now,day1,day2,day3,day4,day5,day6,day7,day8,day9,day10)
--print (now.con,now.tmp,now.flk,now.wch,now.cel,now.hid,now.vis,now.dpt,now.wsp,now.wdg,now.wgi,now.wgs,now.hum,now.prs)
--[[
--forecast information, 10 day, options
--use like this  dayX.option (where X=day number (1=today,2=tomorrow))
--eg day1.day
day=forecast day and date
con=conditions summary
hih=high temp
low=low temp
sri=sunrise
sst=sunset
mri=moon rise
mst=moon set
uvi=ultraviolet index
hum=humidity
ppt=chance of precipitation
snw=chance of snow
cld=cloud cover
mph=moon phase
wmh=wind speed in mph
wkm=wind speed in km/h
wkt=wind speed in knots
wdg=wind direction in degrees
wdi=wind direction in nesw
]]
--#####################################
--setup text type and color
local font="Mono"
local fsize=10
local red,green,blue,alpha=1,1,1,1
local xpos=430
local ypos=30--first line
local gap1=fsize+2
--TEST
--ypos=490--first line
--xpos=200
--gap1=fsize+2
--gap=0
--text=day2.day;txt(text,xpos,ypos,font,10,red,green,blue,alpha)
--text="    Conditions: "..day2.con;gap=gap1+4;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="      Temp Max: "..day2.hih.."°"..units;gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="      Temp Min: "..day2.low.."°"..units;gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="     Indice UV: "..day2.uvn.." ("..day1.uvt..")";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="      Humidité: "..day2.hum.."%";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="    Prob pluie: "..day2.ppt.."%";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="    Prob Neige: "..day2.snw.."%";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text=" Couv.Nuageuse: "..day2.cld.."%";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="  Vent vitesse: "..day2.wmh.."kmh";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)
--text="Vent direction: "..day2.wdg.."° ("..day2.wdi..")";gap=gap+gap1;txt(text,xpos,ypos+gap,font,fsize,red,green,blue,alpha)

--#############################################
--wind direction compass
compass(145,240,50,tonumber(now.wdg),now.wsp,now.wgs)
--windspeed dial
wspeed_dial(now.wsp,305,300)
--################################################################3
--pressure barometer
barometer(tonumber(now.prs),110,395)
--#########################################
--humidity bar
humidity(430.5,315.5,tonumber(now.hum))
--#########################################
--current conditions display
--text="Conditions:";txt(text,240,430,"Mono",12,1,1,1,1)
--text="Température: "..now.tmp.."°, Plafond: "..now.cel;txt(text,240,445,"Mono",10,1,1,1,1)
--text=now.con;txt(text,270,465,"Mono",15,1,1,1,1)

end--display
--#############################################################################################################################################################
function wspeed_dial(ws,px,py)
--0 to 60 mph
--draw circle
cairo_set_line_width (cr,1)
local router=110
cairo_set_source_rgba (cr,0.1,0.1,0.1,1)
cairo_arc (cr,px,py,router,(math.pi/180),0)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,1,1,1)
cairo_arc (cr,px,py,router,(math.pi/180),0)
cairo_stroke (cr)
-------------------------------------------
--mph scale
local rout1=80
local rin1=rout1-10
for i=0,60 do
if i==5 or i==15 or i==25 or i==35 or i==45 then
rin=rin1--set line length for 5s
cairo_set_line_width (cr,1)
elseif i==0 or i==10 or i==20 or i==30 or i==40 or i==50 or i==60 then
rin=rin1+7--set line length for 10's
cairo_set_line_width (cr,3)
else
rin=rin1+5--set other lines
cairo_set_line_width (cr,1)
end--if i==
arc=(math.pi/180)*(210+(i*(300/60)))
ppx=0+rout1*(math.sin(arc))
ppy=0-rout1*(math.cos(arc))
arc=(math.pi/180)*(210+(i*300/60))
pix=0+rin*(math.sin(arc))
piy=0-rin*(math.cos(arc))
cairo_move_to (cr,px+ppx,py+ppy)
cairo_line_to (cr,px+pix,py+piy)
cairo_stroke (cr)
end--for i=
--mph reading
mph={0,10,20,30,40,50,60}
local rin=rin1-2
for i=1,#mph do
arc=(math.pi/180)*(210+((i-1)*(300/6)))
ppx=0+rin*(math.sin(arc))
ppy=0-rin*(math.cos(arc))
text=mph[i]
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
width=extents.width
height=extents.height
cairo_move_to (cr,px+ppx-(width/2),py+ppy+(height/2))
cairo_show_text (cr,text)
cairo_stroke (cr)
end--for i= print inches
--kmh lines and numbers
--60kmh=96.5606
cairo_set_line_width (cr,1)
local m1=300/96.5606
local rout2=60
local rin2=rout2-5
local num=95
--print lines---------------
for i=0,num do
if i==0 or i==10 or i==20 or i==30 or i==40 or i==50 or i==60 or i==70 or i==80 or i==90 then
rin=rin2-5--set length for 10s
elseif i==5 or i==15 or i==25 or i==35 or i==45 or i==55 or i==65 or 1==75 or i==85 or i==95 then
rin=rin2-2--set length for 5's
else
rin=rin2
end--if i=
---------------------------------------------------
arc=(math.pi/180)*(210+(i*m1))
ppx=0+rout2*(math.sin(arc))
ppy=0-rout2*(math.cos(arc))
arc=(math.pi/180)*(210+(i*m1))
pix=0+rin*(math.sin(arc))
piy=0-rin*(math.cos(arc))
cairo_move_to (cr,px+ppx,py+ppy)
cairo_line_to (cr,px+pix,py+piy)
cairo_stroke (cr)
end--for i --line drawing
--kmh reading
kmh={0,10,20,30,40,50,60,70,80,90}
local rout=rin2-18
for i=1,#kmh do
arc=(math.pi/180)*(210+((i-1)*(m1*10)))
ppx=0+rout*(math.sin(arc))
ppy=0-rout*(math.cos(arc))
text=kmh[i]
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
width=extents.width
height=extents.height
cairo_move_to (cr,px+ppx-(width/2),py+ppy+(height/2))
cairo_show_text (cr,text)
cairo_stroke (cr)
end--kmh lines and numbers
--knots
--60kmh=52.1386
cairo_set_line_width (cr,1)
local m1=300/52.1386
local rout3=90
local rin3=rout3-5
local num=50
--print lines---------------
for i=0,num do
if i==0 or i==10 or i==20 or i==30 or i==40 or i==50 then
rout=rout3-1--set length for 10s
cairo_set_line_width (cr,3)
elseif i==5 or i==15 or i==25 or i==35 or i==45 then
rout=rout3+4--set length for 5's
cairo_set_line_width (cr,1)
else
rout=rout3
cairo_set_line_width (cr,1)
end--if i=
---------------------------------------------------
arc=(math.pi/180)*(210+(i*m1))
ppx=0+rout*(math.sin(arc))
ppy=0-rout*(math.cos(arc))
arc=(math.pi/180)*(210+(i*m1))
pix=0+rin3*(math.sin(arc))
piy=0-rin3*(math.cos(arc))
cairo_move_to (cr,px+pix,py+piy)
cairo_line_to (cr,px+ppx,py+ppy)
cairo_stroke (cr)
end--for i --line drawing
--kmh reading
knot={0,10,20,30,40,50}
local rout=rin3+15
for i=1,#kmh do
arc=(math.pi/180)*(210+((i-1)*(m1*10)))
ppx=0+rout*(math.sin(arc))
ppy=0-rout*(math.cos(arc))
text=knot[i]
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
width=extents.width
height=extents.height
cairo_move_to (cr,px+ppx-(width/2),py+ppy+(height/2))
cairo_show_text (cr,text)
cairo_stroke (cr)
end
--scale labels
local text="mph"
local extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin1)
cairo_show_text (cr,text)
cairo_stroke (cr)
local text="kmh"
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin2)
cairo_show_text (cr,text)
cairo_stroke (cr)
local text="Noeuds"
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin3)
cairo_show_text (cr,text)
cairo_stroke (cr)
local text="Mesures Vent"
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin3+12)
cairo_show_text (cr,text)
cairo_stroke (cr)
--pointer
if ws==nil then ws=0 end
local wspd=ws
local m1=300/60
local m2=wspd*m1
local rout1=rout3
local arc=(math.pi/180)*(210+m2)
local ppx=0+rout1*(math.sin(arc))
local ppy=0-rout1*(math.cos(arc))
------------------------------
local arc=(math.pi/180)*(210+m2+180)
local ppox=0+rout1*(math.sin(arc))
local ppoy=0-rout1*(math.cos(arc))
-------------------------------
local rin3=7
local arc=(math.pi/180)*(210+m2-90)
local pilx=0+rin3*(math.sin(arc))
local pily=0-rin3*(math.cos(arc))
local arc=(math.pi/180)*(210+m2+90)
local pirx=0+rin3*(math.sin(arc))
local piry=0-rin3*(math.cos(arc))
--------------------------------
cairo_move_to (cr,px+pilx,py+pily)
cairo_line_to (cr,px+ppx,py+ppy)
cairo_line_to (cr,px+pirx,py+piry)
cairo_line_to (cr,px+pilx,py+pily)
cairo_set_source_rgba (cr,1,0,0,1)
cairo_fill (cr)
cairo_arc (cr,px,py,rin3,(math.pi/180),0)
cairo_fill (cr)
---------------------------------
cairo_move_to (cr,px+pilx,py+pily)
cairo_line_to (cr,px+ppox,py+ppoy)
cairo_line_to (cr,px+pirx,py+piry)
cairo_line_to (cr,px+pilx,py+pily)
cairo_set_source_rgba (cr,1,1,1,1)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,0,0,1)
cairo_arc (cr,px,py,rin3,(math.pi/180),0)
cairo_fill (cr)
-----------------------------------
cairo_set_source_rgba (cr,0,0,0,1)
cairo_arc (cr,px,py,rin3-1,(math.pi/180),0)
cairo_fill (cr)
end--wspeed dial function
--#############################################################################################################################################################
function circlewriting(text, font, fsize, radi, horiz, verti, start, finish)
cairo_select_font_face (cr, font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fsize)
cairo_set_source_rgba (cr,1,1,1,1);
local inum=string.len(text)
local deg=(finish-start)/(inum-1)
local degrads=(math.pi/180)
local textcut=string.gsub(text, ".", "%1|")
texttable=string.split(textcut, "|")
for i=1,inum do
interval=(degrads*(start+(deg*(i-1))))
txs=0+radi*(math.sin(interval))
tys=0-radi*(math.cos(interval))
cairo_move_to (cr, txs+horiz, tys+verti);
cairo_rotate (cr, interval)
cairo_show_text (cr, (texttable[i]))
cairo_stroke (cr)
cairo_rotate (cr, -interval)
end
end--circlewriting
--#############################################################################################################################################################
--#############################################################################################################################################################
function humidity(x,y,hval1)
hval=hval1*1.5
yt=y-1
rh=200
rw=30
local pat = cairo_pattern_create_linear (0,yt,0,yt+rh);
cairo_pattern_add_color_stop_rgba (pat, 1, 0, 0, 1, 0);
cairo_pattern_add_color_stop_rgba (pat, 0, 0, 0, 1, 1);
cairo_rectangle (cr,x,yt,rw, rh);
cairo_set_source (cr, pat);
cairo_fill (cr);
cairo_pattern_destroy (pat);
----------
for i=1,11 do
lwid=-1
cairo_set_source_rgba (cr,1,1,1,1)
cairo_move_to (cr,x+rw,(y+150)-((i-1)*15))
cairo_rel_line_to (cr,lwid,0)
cairo_stroke(cr)
end
----------
cairo_set_source_rgba (cr,1,1,1,1)
hh=5
hw1=19
hw2=hw1+10
if hval==nil then hval=0 end
tx,ty=x+hw1,(y+150)-(hval+hh)
ix,iy=x+hw2,(y+150)-hval
bx,by=x+hw1,(y+150)-(hval-hh)
cairo_move_to (cr,tx,ty)
cairo_line_to (cr,ix,iy)
cairo_line_to (cr,bx,by)
cairo_line_to (cr,tx,ty)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,1,1,1)
font="Mono"
fsize=12
cairo_select_font_face (cr, font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fsize)
cairo_move_to (cr,x+hw2+3,(y+150)-(hval-hh))
cairo_show_text (cr,hval1.."%")
cairo_stroke (cr)
label="Taux d'humidité"
cairo_move_to (cr,x+12,y+150)
cairo_rotate (cr,(math.pi/180)*(-90))
cairo_show_text (cr,label)
cairo_stroke (cr)
cairo_rotate (cr,(math.pi/180)*(90))
end--humidity
--#############################################################################################################################################################
--#############################################################################################################################################################
function txt(text,xpos,ypos,font,fsize,red,green,blue,alpha)
cairo_select_font_face (cr, font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fsize)
cairo_set_source_rgba (cr,red,green,blue,alpha)
cairo_move_to (cr,xpos,ypos)
cairo_show_text (cr,text)
cairo_stroke (cr)
end--function txt
--#############################################################################################################################################################
--#############################################################################################################################################################
function barometer(pr,px,py)
--baromeer 27 inches to 32 inches = 5 inches
cairo_set_line_width (cr,1)
local router=100
cairo_set_source_rgba (cr,0.1,0.1,0.1,1)
cairo_arc (cr,px,py,router,(math.pi/180),0)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,1,1,1)
cairo_arc (cr,px,py,router,(math.pi/180),0)
cairo_stroke (cr)
local rout1=75
local rin1=rout1-10
for i=0,40 do
if i==5 or i==15 or i==25 or i==35 then
rout=rout1-7
cairo_set_line_width (cr,3)
elseif i==0 or i==10 or i==20 or i==30 or i==40 then
rout=rout1
cairo_set_line_width (cr,1)
else
rout=rout1-5
cairo_set_line_width (cr,1)
end
arc=(math.pi/180)*(210+(i*(300/40)))
ppx=0+rout*(math.sin(arc))
ppy=0-rout*(math.cos(arc))
arc=(math.pi/180)*(210+(i*300/40))
pix=0+rin1*(math.sin(arc))
piy=0-rin1*(math.cos(arc))
cairo_move_to (cr,px+ppx,py+ppy)
cairo_line_to (cr,px+pix,py+piy)
cairo_stroke (cr)
end
--inches reading
inch={28,29,30,31}
local rout=rout1+2
for i=1,4 do
arc=(math.pi/180)*(210+(300/8)+((i-1)*(300/4)))
ppx=0+rout*(math.sin(arc))
ppy=0-rout*(math.cos(arc))
text=inch[i]
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
width=extents.width
height=extents.height
cairo_move_to (cr,px+ppx-(width/2),py+ppy+(height/2))
cairo_show_text (cr,text)
cairo_stroke (cr)
end
--942 to 1056
--27.5=931.25
--31.5=1066.70
cairo_set_line_width (cr,1)
local m1=300/135.45
local m2=m1*8.75--931.25+8.75=940
local rout2=60
local rin2=rout2-5
local num=60
for i=0,num do
if i==0 or i==5 or i==10 or i==15 or i==20 or i==25 or i==30 or i==35 or i==40 or i==45 or i==50 or i==55 or i==60 or i==65 then
rin=rin2-5
else
rin=rin2
end
arc=(math.pi/180)*(210+m2+(i*((m1*(num*2))/num)))
ppx=0+rout2*(math.sin(arc))
ppy=0-rout2*(math.cos(arc))
arc=(math.pi/180)*(210+m2+(i*((m1*(num*2))/num)))
pix=0+rin*(math.sin(arc))
piy=0-rin*(math.cos(arc))
cairo_move_to (cr,px+ppx,py+ppy)
cairo_line_to (cr,px+pix,py+piy)
cairo_stroke (cr)
end
--millibars reading
inch={940,960,980,1000,1020,1040,1060}
local rout=rin2-18
for i=1,7 do
arc=(math.pi/180)*(210+m2+((i-1)*(m1*20)))
ppx=0+rout*(math.sin(arc))
ppy=0-rout*(math.cos(arc))
text=inch[i]
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
width=extents.width
height=extents.height
cairo_move_to (cr,px+ppx-(width/2),py+ppy+(height/2))
cairo_show_text (cr,text)
cairo_stroke (cr)
end
--scale labels
local text="inches hg"
local extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin1)
cairo_show_text (cr,text)
cairo_stroke (cr)
local text="millibars"
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin2-height)
cairo_show_text (cr,text)
cairo_stroke (cr)
local text="Pression"
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,px-(width/2),py+rin2+35)
cairo_show_text (cr,text)
cairo_stroke (cr)
--pointer
if pr==nil then pr=27.5 end
local pres=pr-27.5
local m1=300/4
local m2=pres*m1
local rout1=rout1
local arc=(math.pi/180)*(210+m2)
local ppx=0+rout1*(math.sin(arc))
local ppy=0-rout1*(math.cos(arc))
------------------------------
local arc=(math.pi/180)*(210+m2+180)
local ppox=0+rout1*(math.sin(arc))
local ppoy=0-rout1*(math.cos(arc))
-------------------------------
local rin3=7
local arc=(math.pi/180)*(210+m2-90)
local pilx=0+rin3*(math.sin(arc))
local pily=0-rin3*(math.cos(arc))
local arc=(math.pi/180)*(210+m2+90)
local pirx=0+rin3*(math.sin(arc))
local piry=0-rin3*(math.cos(arc))
--------------------------------
cairo_move_to (cr,px+pilx,py+pily)
cairo_line_to (cr,px+ppx,py+ppy)
cairo_line_to (cr,px+pirx,py+piry)
cairo_line_to (cr,px+pilx,py+pily)
cairo_set_source_rgba (cr,1,0,0,1)
cairo_fill (cr)
cairo_arc (cr,px,py,rin3,(math.pi/180),0)
cairo_fill (cr)
---------------------------------
cairo_move_to (cr,px+pilx,py+pily)
cairo_line_to (cr,px+ppox,py+ppoy)
cairo_line_to (cr,px+pirx,py+piry)
cairo_line_to (cr,px+pilx,py+pily)
cairo_set_source_rgba (cr,1,1,1,1)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,0,0,1)
cairo_arc (cr,px,py,rin3,(math.pi/180),0)
cairo_fill (cr)
-----------------------------------
cairo_set_source_rgba (cr,0,0,0,1)
cairo_arc (cr,px,py,rin3-1,(math.pi/180),0)
cairo_fill (cr)
----text
local horiz=px
local verti=py
local radi=87
local text="TEMPETE"
local font="Mono"
local fsize=12
local start=250
local finish=start+((string.len(text))*5)
circlewriting(text, font, fsize, radi, horiz, verti, start, finish)
local text="Pluie"
local start=300
local finish=start+((string.len(text))*5)
circlewriting(text, font, fsize, radi, horiz, verti, start, finish)
local text="Variable"
local start=340
local finish=start+((string.len(text))*5)
circlewriting(text, font, fsize, radi, horiz, verti, start, finish)
local text="Beau"
local start=395
local finish=start+((string.len(text))*5)
circlewriting(text, font, fsize, radi, horiz, verti, start, finish)
local text="TRES SEC"
local start=435
local finish=start+((string.len(text))*5)
circlewriting(text, font, fsize, radi, horiz, verti, start, finish)
end--barometer
--#############################################################################################################################################################
--#############################################################################################################################################################
function compass(wx,wy,rout,wdeg,w,wg)
local rin=rout-((rout/100)*10)
cairo_set_source_rgba (cr,0.1,0.1,0.1,1)
cairo_arc (cr,wx,wy,rout,(math.pi/180),0)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,1,1,1)
cairo_arc (cr,wx,wy,rout,(math.pi/180),0)
cairo_stroke (cr)
for i=1,36 do
arc=(math.pi/180)*(i*10)
wpx=0+rout*(math.sin(arc))
wpy=0-rout*(math.cos(arc))
arc=(math.pi/180)*(i*10)
wix=0+rin*(math.sin(arc))
wiy=0-rin*(math.cos(arc))
cairo_move_to (cr,wx+wpx,wy+wpy)
cairo_line_to (cr,wx+wix,wy+wiy)
cairo_stroke (cr)
end
--print directions
local font="Mono"
local fsize=10
cairo_select_font_face (cr, font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fsize)
dirs={"N","NE","E","SE","S","SO","O","NO"}
local rdir=rout-((rout/100)*25)
for i=1,8 do
arc=(math.pi/180)*((i-1)*(360/8))
wdx=0+rdir*(math.sin(arc))
wdy=0-rdir*(math.cos(arc))
text=dirs[i]
extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
width=extents.width
height=extents.height
cairo_move_to (cr,wx+wdx-(width/2),wy+wdy+(height/2))
cairo_show_text (cr,text)
cairo_stroke (cr)
end
--indicator
local npr=rout-((rout/100)*15)
if wdeg==nil then wdeg=0 end
local arc=(math.pi/180)*(wdeg)
local npx=0+npr*(math.sin(arc))
local npy=0-npr*(math.cos(arc))
cairo_move_to (cr,wx+npx,wy+npy)
local nprm=rout-((rout/100)*88)
local arc=(math.pi/180)*(wdeg+90)
local npmrx=0+nprm*(math.sin(arc))
local npmry=0-nprm*(math.cos(arc))
local arc=(math.pi/180)*(wdeg-90)
local npmlx=0+nprm*(math.sin(arc))
local npmly=0-nprm*(math.cos(arc))
cairo_line_to (cr,wx+npmrx,wy+npmry)
cairo_line_to (cr,wx+npmlx,wy+npmly)
cairo_line_to (cr,wx+npx,wy+npy)
cairo_set_source_rgba (cr,1,0,0,1)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,1,1,1)
---------------------------------
local arc=(math.pi/180)*(wdeg-180)
local spx=0+npr*(math.sin(arc))
local spy=0-npr*(math.cos(arc))
cairo_move_to (cr,wx+spx,wy+spy)
local sprm=nprm
local arc=(math.pi/180)*(wdeg+90-180)
local spmrx=0+sprm*(math.sin(arc))
local spmry=0-sprm*(math.cos(arc))
local arc=(math.pi/180)*(wdeg-90-180)
local spmlx=0+sprm*(math.sin(arc))
local spmly=0-sprm*(math.cos(arc))
cairo_line_to (cr,wx+spmrx,wy+spmry)
cairo_line_to (cr,wx+spmlx,wy+spmly)
cairo_line_to (cr,wx+spx,wy+spy)
cairo_fill (cr)
--------------------------------------
cairo_set_source_rgba (cr,0,0,0,1)
cairo_arc (cr,wx,wy,nprm,(math.pi/180),0)
cairo_fill (cr)
cairo_set_source_rgba (cr,1,0,0,1)
cairo_arc (cr,wx,wy,nprm,(math.pi/180),0)
cairo_stroke (cr)
------------------------
cairo_set_source_rgba (cr,1,1,1,1)
local text="Rose des Vents"
local extents=cairo_text_extents_t:create()
cairo_text_extents(cr,text,extents)
local width=extents.width
local height=extents.height
cairo_move_to (cr,wx-(width/10),wy-rout-5)
cairo_show_text (cr,text)
cairo_stroke (cr)
end--compass
--#############################################################################################################################################################
--
--#############################################################################################################################################################
function conky_draw_bg(r,x,y,w,h,color,alpha)
local function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
if conky_window == nil then return end
if cs == nil then cairo_surface_destroy(cs) end
if cr == nil then cairo_destroy(cr) end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
cairo_set_source_rgba (cr,rgb_to_r_g_b(color,alpha))
--top left mid circle
local xtl=x+r
local ytl=y+r
--top right mid circle
local xtr=(x+r)+((w)-(2*r))
local ytr=y+r
--bottom right mid circle
local xbr=(x+r)+((w)-(2*r))
local ybr=(y+r)+((h)-(2*r))
--bottom right mid circle
local xbl=(x+r)
local ybl=(y+r)+((h)-(2*r))
-----------------------------
cairo_move_to (cr,xtl,ytl-r)
cairo_line_to (cr,xtr,ytr-r)
cairo_arc(cr,xtr,ytr,r,((2*math.pi/4)*3),((2*math.pi/4)*4))
cairo_line_to (cr,xbr+r,ybr)
cairo_arc(cr,xbr,ybr,r,((2*math.pi/4)*4),((2*math.pi/4)*1))
cairo_line_to (cr,xbl,ybl+r)
cairo_arc(cr,xbl,ybl,r,((2*math.pi/4)*1),((2*math.pi/4)*2))
cairo_line_to (cr,xtl-r,ytl)
cairo_arc(cr,xtl,ytl,r,((2*math.pi/4)*2),((2*math.pi/4)*3))
cairo_close_path(cr)
cairo_fill (cr)
------------------------------------------------------------
cairo_surface_destroy(cs)
cairo_destroy(cr)
return ""
end 

Hors ligne

#1639 Le 29/11/2012, à 17:23

viper69

Re : [Conky] Alternative à weather.com (2)

re bonjour
Encore moi.... le conky fonctionne par contre l'information me semble bizare
voila l illustration
capturedu20121129171042.png

Uploaded with ImageShack.us
les indications en rose me semblent farfelues
vous en pensez quoi?

Quelle correction et ou apporter cette correction?

merci


Viper69
J'ai ouvert les fenêtres - J'ai vu que l'on pouvait être libre
Le manuel disait "Nécessite Windows XP ou mieux". J'ai donc installé Linux.
Ubuntu depuis 7.04 / Laptop: PressarioC60 / Bureau: CQ5335 / Minipc:LDLC Mercure ML1-C1-2-H1

Hors ligne

#1640 Le 29/11/2012, à 17:41

Didier-T

Re : [Conky] Alternative à weather.com (2)

viper69 a écrit :

re bonjour
Encore moi.... le conky fonctionne par contre l'information me semble bizare
voila l illustration
http://img27.imageshack.us/img27/6026/capturedu20121129171042.png

Uploaded with ImageShack.us
les indications en rose me semblent farfelues
vous en pensez quoi?

Quelle correction et ou apporter cette correction?

merci

En fait ces probabilités sont possibles, il faut vérifier sur le site accuweater, pour être certain qu'il n'y a pas discordance.

Hors ligne

#1641 Le 29/11/2012, à 17:41

Phyllinux

Re : [Conky] Alternative à weather.com (2)

viper69 a écrit :

re bonjour
Encore moi.... le conky fonctionne par contre l'information me semble bizare
voila l illustration
http://img27.imageshack.us/img27/6026/capturedu20121129171042.png

Uploaded with ImageShack.us
les indications en rose me semblent farfelues
vous en pensez quoi?

Quelle correction et ou apporter cette correction?

merci

Les chiffres que tu trouves bizarres correspondent en fait au pourcentage de probabilité de précipitations (pluie ou neige).
Si tu le veux, tu peux choisir une couleur différente des températures pour ne pas les confondre.
En fait, tu regardes dans le conky, lorsque la fonction 'template1 Jour (ou Nuit)_ProbPrec' est appelée, et tu mets la couleur de police que tu désires.
Sinon, ce chiffre n'est pas farfelu. Lorsque la probabilité est >50%, tu peux être sûr qu'il pleuvra !


The ship is sinking normally...

Hors ligne

#1642 Le 29/11/2012, à 21:02

viper69

Re : [Conky] Alternative à weather.com (2)

ok pigé.
Tout à l'air de bien fonctionner
merci pour tout

je vais m'attaquer maintenant aux informations du systeme.

merci pour vos aides a tous


Viper69
J'ai ouvert les fenêtres - J'ai vu que l'on pouvait être libre
Le manuel disait "Nécessite Windows XP ou mieux". J'ai donc installé Linux.
Ubuntu depuis 7.04 / Laptop: PressarioC60 / Bureau: CQ5335 / Minipc:LDLC Mercure ML1-C1-2-H1

Hors ligne

#1643 Le 30/11/2012, à 11:07

ragamatrix

Re : [Conky] Alternative à weather.com (2)

Salut !
Est-ce possible de reprendre un script lua afin de l'utiliser seulement pour dessiner des cercles et les configurer à sa guise ...?
Il faudrait seulement garder les fonctions necessaires, mais je ne sais pas trop comment m'y prendre pour les discocier des autres...

Je ne sais pas si c'est clair, c'était une idée afin d'utiliser des cercles pour créer encore plein de différents conky.

Je trouve la présentation des infos conky dans des cercles agréables visuellement.
Qu'en pensez-vous ?

J'ai essayer de reprendre seulement certaines fonctions de ce script mais évidemment ça ne fonctionne pas...

 --even more weather by mrpeachy 12/31/11

require 'cairo'
require 'imlib2'
function string:split(delimiter)
local result = { }
local from  = 1
local delim_from, delim_to = string.find( self, delimiter, from  )
while delim_from do
table.insert( result, string.sub( self, from , delim_from-1 ) )
from  = delim_to + 1
delim_from, delim_to = string.find( self, delimiter, from  )
end
table.insert( result, string.sub( self, from  ) )
return result
end
--set defaults
default_font="mono"--font must be in quotes
default_font_size=10
default_color=0xffffff--white
default_alpha=1--fully opaque
default_image_width=50
default_image_height=50
--############start of timed section#######################################################################
--#########################################################################################################
local updates=tonumber(conky_parse('${updates}'))
local timer=(updates %secs)+1
--#######################################
--if timer==secs or updates==6 then--######
--#######################################
--###########################
--write lines here to show in conky
--these tables hold the top left coordinates for each repeat as set lower, do not edit
top_left_x_coordinate={}
top_left_y_coordinate={}
--write settings, c=color,a=alpha,f=font,fs=font size,x=x position, y=y position, txt=text or data to show
--eg out({c=0xffff00,a=1,f="Sans",fs=14,x=100,y=100,txt="hello world"})
--image settings, x=top left x position, y=top left y position, w=width of image(0=full size), h=height(0=full size),file=file location
--eg image({x=0,y=35,w=60,h=60,file=now[weather_icon]})
--########################################################
--######### write or paste setups below ##################
--########################################################
midx=160
midy=160
radouter=150
radinner=50
radforecast=90
radhilo=125
radfctxt=130
radcond=110
radsmall=25
fcangle1=0
fcangle2=45
fcangle3=90
fcangle4=135
fcangle5=180
wcr,wcg,wcb,wca=1,1,1,0.3
---------------------------------------------
cairo_set_line_width (cr,1)
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
--draw outer circle
cairo_arc (cr,midx,midy,radouter,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
--draw inner circle
cairo_arc (cr,midx,midy,radinner,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
--draw forecast line and text
astr=270
aend=350
cairo_arc (cr,midx,midy,radfctxt,(math.pi/180)*(astr-90),(math.pi/180)*(aend-90))
cairo_stroke (cr)
cwt={text="PREVISIONS",font="mono",fsize=16,radius=radfctxt+3,xpos=midx,ypos=midy,position=1,start=astr,finish=aend,justify=1,letterdeg=5,};cw(cwt)
--set start and end angle for conditions box
astr=205
aend=335
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
cairo_arc (cr,midx,midy,radcond,(math.pi/180)*(astr-90),(math.pi/180)*(aend-90))
cairo_stroke (cr)


--print current conditions wrap to length
--wrap settings


crad1=trad-16
crad2=crad1-16
cwt={text=clines[1],font="mono",fsize=14,radius=crad1,xpos=midx,ypos=midy,position=2,start=astr+5,finish=aend-10,justify=1,letterdeg=7,};cw(cwt)
cwt={text=clines[2],font="mono",fsize=14,radius=crad2,xpos=midx,ypos=midy,position=1,start=astr+5,finish=aend-10,justify=1,letterdeg=8,};cw(cwt)
--connect lines to form curent box
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
arc=(math.pi/180)*astr
xs1=0+radcond*(math.sin(arc))
ys1=0-radcond*(math.cos(arc))
arc=(math.pi/180)*astr
xe1=0+radinner*(math.sin(arc))
ye1=0-radinner*(math.cos(arc))
cairo_move_to (cr,midx+xs1,midy+ys1)
cairo_line_to (cr,midx+xe1,midy+ye1)
cairo_stroke (cr)
arc=(math.pi/180)*aend
xs2=0+radcond*(math.sin(arc))
ys2=0-radcond*(math.cos(arc))
arc=(math.pi/180)*aend
xe2=0+radinner*(math.sin(arc))
ye2=0-radinner*(math.cos(arc))
cairo_move_to (cr,midx+xs2,midy+ys2)
cairo_line_to (cr,midx+xe2,midy+ye2)
cairo_stroke (cr)
--individual fc circles and forecast data
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
arc=(math.pi/180)*fcangle1
xfc1=0+radforecast*(math.sin(arc))
yfc1=0-radforecast*(math.cos(arc))
cairo_arc (cr,midx+xfc1,midy+yfc1,radsmall,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
radst=14
	arc=(math.pi/180)*fcangle1
	xfc1hl=0+(radsmall+radst)*(math.sin(arc))
	yfc1hl=0-(radsmall+radst)*(math.cos(arc))
	
	cairo_stroke (cr)
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
arc=(math.pi/180)*fcangle2
xfc2=0+radforecast*(math.sin(arc))
yfc2=0-radforecast*(math.cos(arc))
cairo_arc (cr,midx+xfc2,midy+yfc2,radsmall,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
	arc=(math.pi/180)*fcangle2
	xfc2hl=0+(radsmall+radst)*(math.sin(arc))
	yfc2hl=0-(radsmall+radst)*(math.cos(arc))
	
	cairo_stroke (cr)
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
arc=(math.pi/180)*fcangle3
xfc3=0+radforecast*(math.sin(arc))
yfc3=0-radforecast*(math.cos(arc))
cairo_arc (cr,midx+xfc3,midy+yfc3,radsmall,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
	arc=(math.pi/180)*fcangle3
	xfc3hl=0+(radsmall+radst)*(math.sin(arc))
	yfc3hl=0-(radsmall+radst)*(math.cos(arc))
	
	cairo_stroke (cr)
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
arc=(math.pi/180)*fcangle4
xfc4=0+radforecast*(math.sin(arc))
yfc4=0-radforecast*(math.cos(arc))
cairo_arc (cr,midx+xfc4,midy+yfc4,radsmall,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
	arc=(math.pi/180)*fcangle4
	xfc4hl=0+(radsmall+radst)*(math.sin(arc))
	yfc4hl=0-(radsmall+radst)*(math.cos(arc))
	
	cairo_stroke (cr)
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)
arc=(math.pi/180)*fcangle5
xfc5=0+radforecast*(math.sin(arc))
yfc5=0-radforecast*(math.cos(arc))
cairo_arc (cr,midx+xfc5,midy+yfc5,radsmall,(math.pi/180)*0,(math.pi/180)*360)
cairo_stroke (cr)
	arc=(math.pi/180)*fcangle5
	xfc5hl=0+(radsmall+radst)*(math.sin(arc))
	yfc5hl=0-(radsmall+radst)*(math.cos(arc))
	
	cairo_stroke (cr)
cairo_set_source_rgba (cr,wcr,wcg,wcb,wca)

--#########################################################
--########## end of current conditions ####################
--######### forecast weather and repeat ###################
--#########################################################

function cw(t)
--set variables and defualts
if t.text==nil then text="" else text=t.text end
if t.font==nil then font="mono" else font=t.font end
if t.fsize==nil then fsize=12 else fsize=t.fsize end
if t.radius==nil then radius=50 else radius=t.radius end
if t.xpos==nil then xpos=100 else xpos=t.xpos end
if t.ypos==nil then ypos=100 else ypos=t.ypos end
if t.position==nil then position=1 else position=t.position end
if t.start==nil then start=270 else start=t.start end
if t.finish==nil then finish=90 else finish=t.finish end
if t.justify==nil then justify=1 else justify=t.justify end
if t.letterdeg==nil then letterdeg=5 else letterdeg=t.letterdeg end
--end variables
cairo_select_font_face (cr, font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fsize)
cairo_set_source_rgba (cr,1,1,1,1);
if finish<start then finish=finish+360 end
local inum=string.len(text)
---------------------------
if position==1 then
deg=(finish-start)/(inum-1)
elseif position==2 then
deg=letterdeg
	if justify==1 then
	start=start	
	elseif justify==2 then
	start=start-((letterdeg*inum)/2)
	elseif justify==3 then 
	start=start-(letterdeg*inum)
	end
end
----------------------------
local degrads=(math.pi/180)
local textcut=string.gsub(text, ".", "%1|")
texttable=string.split(textcut, "|")
for i=1,inum do
interval=(degrads*(start+(deg*(i-1))))
txs=0+radius*(math.sin(interval))
tys=0-radius*(math.cos(interval))
cairo_move_to (cr, txs+xpos, tys+ypos);
cairo_rotate (cr, interval)
cairo_show_text (cr, (texttable[i]))
cairo_stroke (cr)
cairo_rotate (cr, -interval)
end
end--circlewriting
function cwd(t)
--set variables and defualts
if t.text==nil then text="" else text=t.text end
if t.font==nil then font="mono" else font=t.font end
if t.fsize==nil then fsize=12 else fsize=t.fsize end
if t.radius==nil then radius=50 else radius=t.radius end
if t.xpos==nil then xpos=100 else xpos=t.xpos end
if t.ypos==nil then ypos=100 else ypos=t.ypos end
if t.position==nil then position=1 else position=t.position end
if t.start==nil then start=270 else start=t.start end
if t.finish==nil then finish=90 else finish=t.finish end
if t.justify==nil then justify=1 else justify=t.justify end
if t.letterdeg==nil then letterdeg=5 else letterdeg=t.letterdeg end
--end variables
cairo_select_font_face (cr, font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fsize)
cairo_set_source_rgba (cr,1,1,1,1);
if start<finish then start=start+360 end
local inum=string.len(text)
---------------------------
if position==1 then
deg=(start-finish)/(inum-1)
elseif position==2 then
deg=letterdeg
	if justify==1 then
	start=start	
	elseif justify==2 then
	start=start+((letterdeg*inum)/2)
	elseif justify==3 then 
	start=start+(letterdeg*inum)
	end
end
----------------------------
local degrads=(math.pi/180)
local textcut=string.gsub(text, ".", "%1<>")
texttable=string.split(textcut, "<>")
for i=1,inum do
interval=(degrads*(start-(deg*(i-1))))
txs=0+radius*(math.sin(interval))
tys=0-radius*(math.cos(interval))
cairo_move_to (cr, txs+xpos, tys+ypos);
cairo_rotate (cr, interval+(math.pi))
cairo_show_text (cr, (texttable[i]))
cairo_stroke (cr)
cairo_rotate (cr, -1*(interval+(math.pi)))
end
end--cwd 

function to_lines(line_text,max_string_len,indent)
---------------------------------------------
--set defaults for function
local default_max_length=50
local default indent=""
---------------------------------------------
if indent==nil then indent=default_indent end
if max_string_len==nil then max_string_len=default_max_length end
local i=1
text_table={line_text}
while text_table[i]~=nil do
if max_string==nil then max_string=max_string_len end
local v=text_table[i]
	if string.len(v)>max_string_len and string.find(v," ")~=nil and string.find(string.sub(v,1,max_string)," ")~=nil then
	long=string.len(v)
	splitcha=string.sub(v,max_string,max_string)	
		if splitcha~=" " then		
			while splitcha~=" " do
				if max_string>1 then
				max_string=max_string-1
				splitcha=string.sub(v,max_string,max_string)
				else
				splitcha=" "
				end
			end
		end
		local insertit=tostring(indent..string.sub(v,max_string+1,long))
		table.insert(text_table,i+1,insertit)
		text_table[i]=tostring(string.sub(v,1,max_string-1))	
	elseif string.len(v)>max_string_len and string.find(v," ")~=nil and string.find(string.sub(v,1,max_string)," ")==nil then
	long=string.len(v)
	splitcha=string.sub(v,max_string,max_string)		
		while splitcha~=" " do
			if max_string<long then
			max_string=max_string+1
			splitcha=string.sub(v,max_string,max_string)
			else
			splitcha=" "
			end
		end
		local insertit=tostring(indent..string.sub(v,max_string+1,long))
		table.insert(text_table,i+1,insertit)
		text_table[i]=tostring(string.sub(v,1,max_string-1))	
	end
i=i+1
max_string=max_string_len
end
return text_table
end--function  
 

Dernière modification par ragamatrix (Le 30/11/2012, à 11:12)

Hors ligne

#1644 Le 30/11/2012, à 12:39

Didier-T

Re : [Conky] Alternative à weather.com (2)

quand tu nous parles de cercles, tu veux dire des anneaux, ou des cerles avec un fond ?
s'il s'agit bien de cercles, il y a un script qui le fait très bien dans le chronographe.

Hors ligne

#1645 Le 30/11/2012, à 12:50

ragamatrix

Re : [Conky] Alternative à weather.com (2)

Didier-T a écrit :

quand tu nous parles de cercles, tu veux dire des anneaux, ou des cerles avec un fond ?
s'il s'agit bien de cercles, il y a un script qui le fait très bien dans le chronographe.

Oui il s'agit de cercles; que j'ai deja utilisé dans le chronographe pour faire cela (violets) :
cercles
cercles
Ce que je voudrais faire c'est le script réalisant ces seules fonctions (dessiner des cercles)afin de les parametrer comme on veut...
en gros faire un script ne faisant que ça:

 -- Borders weather circles############################
-- Border SETTINGS1
clock_radius=160
clock_centerx=init.center_x
clock_centery=init.center_y+390
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS2
clock_radius=40
clock_centerx=init.center_x-10
clock_centery=init.center_y+285
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- CLOCK E ###### 12 HR TIME ##############################
-- Border SETTINGS3
clock_radius=40
clock_centerx=init.center_x+80
clock_centery=init.center_y+340
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- CLOCK E ###### 12 HR TIME ##############################
-- Border SETTINGS3
clock_radius=40
clock_centerx=init.center_x+80
clock_centery=init.center_y+440
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS4
clock_radius=40
clock_centerx=init.center_x-10
clock_centery=init.center_y+495
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS5
clock_radius=40
clock_centerx=init.center_x-105
clock_centery=init.center_y+390
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- DRAW MARKS 

Il faudrait seulement garder les fonctions necessaires, mais je ne sais pas trop comment m'y prendre pour les discocier des autres...

Dans le script je ne sais pas ce que je dois garder et ce que je dois supprimer...
script entier :

 --[[ multiple analogue clocks by mrpeachy - 18 Jun 2012
 21 Jun 2012 - Chronograph modifications by Sector11
 22 Jun 2012 - again with mrpeachy's help day names, numbers and month names
 12 Nov 2012 - memory leak plugged - mrpeachy
 14 Nov 2012 - Personnalisation - Didier-T (forum Ubuntu.fr)

use in conkyrc

lua_load /path/Chronograph.lua
lua_draw_hook_pre main
TEXT

]]

require 'cairo'
--Position et taille horloge
local init={
center_x=175,
center_y=175,
radius=170, -- do not touch
lang="French", --English or Spanish or French
hour=12, --12 or 24
second=true, --true or false
line=false, --hand secondes true or false
handday=false, --hand day true or false
handdaynum=false, --hand day number true or false
handmonth=false, --hand month true or false
color=0xf50002, --color for day, day number and month if none hand
alpha=1 --alpha for day, day number and month if none hand
}

local colr, colg, colb, cola=rgb_to_r_g_b(init.color,init.alpha)

function conky_main()
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
local extents=cairo_text_extents_t:create()
tolua.takeownership(extents)
---[##drawings_new_hands
--this function caluculates coordinates for a point around a circle
function pt(px,py,prad,pdeg)--px,py=center coordinates for circle, prad=radius,pdeg is position in degrees, 0 is top
local ppo=(math.pi/180)*pdeg
local px1=px+prad*(math.sin(ppo))
local py1=py-prad*(math.cos(ppo))
return px1,py1--returns coordinates, use in main function like this, x,y=pt(px,py,prad,pdeg)
end

--this function draws hands
function hands(clock_centerx,clock_centery,degrees,length,hand_center_width,hand_mid_width,hand_end_width,distance_to_mid)
--draw_middle
--calc start point
xs,ys=pt(clock_centerx,clock_centery,hand_center_width,degrees-90)
cairo_move_to(cr,xs,ys)
x1,y1=pt(clock_centerx,clock_centery,length*distance_to_mid,degrees-(hand_mid_width/2))
cairo_line_to (cr,x1,y1)
x2,y2=pt(clock_centerx,clock_centery,length,degrees)
cairo_arc(cr,x2,y2,hand_end_width,(degrees+180)*(math.pi/180),(degrees)*(math.pi/180))
--cairo_line_to (cr,x2,y2)
x3,y3=pt(clock_centerx,clock_centery,length*distance_to_mid,degrees+(hand_mid_width/2))
cairo_line_to (cr,x3,y3)
--calc end point
xe,ye=pt(clock_centerx,clock_centery,hand_center_width,degrees+90)
cairo_line_to (cr,xe,ye)
cairo_arc(cr,clock_centerx,clock_centery,hand_center_width,(degrees)*(math.pi/180),(degrees+180)*(math.pi/180))
cairo_fill(cr)
end

-- ########################################################
-- SETTINGS AREA
-- local cpu=conky_parse("${cpu}")
-- local red-1=conky_parse("${image ~/Conky/images/red_1.png -p 0,0 -s 35x35}")

local clock_type_A=init.hour -- Large Main 24 HR Clock

-- ###### CLOCK SETTINGS ##################################
-- SET BORDER OPTIONS FOR "New_weather_proto" ########################
local clock_border_width=1
-- set color and alpha for clock border
local cbr,cbg,cbb,cba=1,1,1,1  -- full opaque white
-- gap from clock border to minute marks
local b_to_m=1

-- ########################################################
-- ### START DIAL B ### Top - Week Day Names Dial #########
-- DIAL POSITION FOR TEXT
local center_x=init.center_x-20
local center_y=init.center_y-78
local radius=55
-- FONT
cairo_select_font_face (cr, "FreeMono", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 11)
cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)	-- (cr,1,1,1,1)
-- TABLE OF TEXT -- in order
if init.lang == "English" then text_days={"Sun","Mon","Tue","Wed","Thr","Fri","Sat",}	end	-- English
if init.lang == "Spanish" then text_days={"Dom","Lun","Mar","Mie","Jue","Vie","Sab",}	end	-- Spanish
if init.lang == "French" then text_days={"Dim","Lun","Mar","Mer","Jeu","Ven","Sam",}	end	-- French
local day_number=tonumber(os.date("%w"))
if init.handday == true then
  for i=1,7 do
    -- work out points
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=35
  for i=1,7 do
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
  -- DRAW HAND -- snaps to current day of week
  local hand_length=30
  local point=(math.pi/180)*((360/7)*(day_number))
  local x=0+hand_length*(math.sin(point))
  local y=0-hand_length*(math.cos(point))
  local hand_width=2
  cairo_move_to (cr,center_x,center_y)
  cairo_line_to (cr,center_x+x,center_y+y)
  cairo_stroke (cr)
else
  for i=1,7 do
    -- work out points
    if day_number == i-1 then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,169/255,169/255,169/255,1)--Days ---181, 224, 255
    end
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle####Points days
  local radius=35
  for i=1,7 do
    if day_number == i-1 then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
    end
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=5-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end

end
-- ### END DIAL B #########################################

-- ########################################################
-- ### START DIAL C ### Right - Month Names Dial ##########
-- DIAL POSITION FOR TEXT
local center_x=init.center_x+82
local center_y=183
local radius=50
-- FONT
cairo_select_font_face (cr, "FreeMono", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 11)
cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)	-- (cr,1,1,1,1)
-- TABLE OF TEXT -- in order
if init.lang == "English" then text_days={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec",} end -- English
if init.lang == "Spanish" then text_days={"Ene","Feb","Mar","Abr","May","Jun","Jul","Ago","Sep","Oct","Nov","Dic",} end -- Spanish
if init.lang == "French" then text_days={"Jan","Fév","Mar","Avr","Mai","Jui","Jul","Aôu","Sep","Oct","Nov","Déc",} end -- French
local this_month=tonumber(os.date("%m"))

if init.handmonth == true then
  for i=1,12 do
    -- OUTTER POINTS POSiTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=32
  for i=1,12 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
  -- DRAW HAND -- snaps to current month
  local hand_length=28 --radius for this calculation
  local point=(math.pi/180)*((360/12)*(this_month-1))
  local x=0+hand_length*(math.sin(point))
  local y=0-hand_length*(math.cos(point))
  cairo_move_to (cr,center_x,center_y)
  cairo_line_to (cr,center_x+x,center_y+y)
  cairo_stroke (cr)
else
  for i=1,12 do
    if this_month == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,169/255,169/255,169/255,1)
    end
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=-3-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=32
  for i=1,12 do
    if this_month == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
    end
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end

end
-- ### END CLOCK C ########################################

-- ########################################################
-- ### START DIAL D ### Left - Day Numbers Dial ###########
-- GET NUMBER OF DAYS IN CURRENT MONTH
-- calculate Feb, then set up table
year4num=os.date("%Y")
t1=os.time({year=year4num,month=03,day=01,hour=00,min=0,sec=0});
t2=os.time({year=year4num,month=02,day=01,hour=00,min=0,sec=0});
if init.hour == 12 then
  febdaynum=tonumber((os.difftime(t1,t2))/(12*60*60))
else
  febdaynum=tonumber((os.difftime(t1,t2))/(24*60*60))
end
-- MONTH TABLE
monthdays={31,febdaynum,31,30,31,30,31,31,30,31,30,31}
this_month=tonumber(os.date("%m"))
number_days=monthdays[this_month]
-- TEXT positioning
local center_x=init.center_x-45
local center_y=init.center_y+62
local radius=55
cairo_select_font_face (cr, "Digitalk", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 10)
cairo_set_source_rgba (cr,1,1,1,1) --(cr,245/255,242/255,143/255,1) -- (cr,1,1,1,1)
local this_day=tonumber(os.date("%d"))
if init.handdaynum == true then
  for i=1,number_days do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    --only print even numbers
    if math.mod(i, 2) == 0 then
      --set text when even
      text=string.format("%02d",i) --formats numbers to double digits
    else
      --set text when odd
      text=""
    end--odd even matching
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=40
  for i=1,number_days do
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
  -- DRAW HAND -- snaps to current DAY
  local hand_length=35--radius for this calculation
  local point=(math.pi/180)*((360/number_days)*(this_day-1))
  local x=0+hand_length*(math.sin(point))
  local y=0-hand_length*(math.cos(point))
  cairo_move_to (cr,center_x,center_y)
  cairo_line_to (cr,center_x+x,center_y+y)
  cairo_stroke (cr)
else
  for i=1,number_days do
    if this_day == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,169/255,169/255,169/255,1)
    end
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    --only print even numbers
    if math.mod(i, 2) == 0 then
      --set text when even
      text=string.format("%02d",i) --formats numbers to double digits
    else
      --set text when odd
      text=""
    end--odd even matching
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=40
  for i=1,number_days do
    if this_day == i then
      cairo_set_source_rgba (cr,colr, colg, colb, cola)
    else
      cairo_set_source_rgba (cr,219/255,168/255,255/255,1)--points day numbers
    end
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
end
-- ### END CLOCK D ########################################

-- ########################################################
-- ### START CLOCK E ######################################
-- MARKS AROUND CLOCK E -- Bottom - 12 HR Clock
local number_marks_E=12
-- set mark length
local m_length_E=0
-- set mark width
local m_width_E=0
-- set mark line cap type
local m_cap=CAIRO_LINE_CAP_ROUND
-- set mark color and alpha,red blue green alpha
local mr,mg,mb,ma=1,1,0,1-- opaque white
-- SETUP HOUR HANDS #######################################
-- CLOCK E HOUR HAND
-- set length of hour hand
hh_length_E=25
-- set hour hand width
hh_width_E=2
-- set hour hand line cap
hh_cap=CAIRO_LINE_CAP_ROUND
-- set hour hand color
hhr,hhg,hhb,hha=1,1,0,1-- fully opaque white
-- SETUP MINUTE HANDS #####################################
-- CLOCK E MINUTE HAND SETUP
-- set length of minute hand
mh_length_E=35
-- set minute hand width
mh_width_E=2
-- set minute hand line cap
mh_cap=CAIRO_LINE_CAP_ROUND
-- set minute hand color
mhr,mhg,mhb,mha=1,1,0,1-- fully opaque white
-- SETUP SECOND HANDS #####################################
-- CLOCK E SECOND HAND SETUP
-- set length of seconds hand
sh_length_E=32
-- set hour hand width
sh_width_E=1
-- set hour hand line cap
sh_cap=CAIRO_LINE_CAP_ROUND
-- set seconds hand color
shr,shg,shb,sha=1,0,0,1-- fully opaque red
-- Borders weather circles############################
-- Border SETTINGS1
clock_radius=160
clock_centerx=init.center_x
clock_centery=init.center_y+390
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS2
clock_radius=40
clock_centerx=init.center_x-10
clock_centery=init.center_y+285
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- CLOCK E ###### 12 HR TIME ##############################
-- Border SETTINGS3
clock_radius=40
clock_centerx=init.center_x+80
clock_centery=init.center_y+340
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- CLOCK E ###### 12 HR TIME ##############################
-- Border SETTINGS3
clock_radius=40
clock_centerx=init.center_x+80
clock_centery=init.center_y+440
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS4
clock_radius=40
clock_centerx=init.center_x-10
clock_centery=init.center_y+495
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- Border SETTINGS5
clock_radius=40
clock_centerx=init.center_x-105
clock_centery=init.center_y+390
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,219/255,168/255,255/255,1)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- DRAW MARKS
-- stuff that can be moved outside of the loop, needs only be set once
-- calculate end and start radius for marks
m_end_rad=clock_radius-b_to_m
m_start_rad=m_end_rad-m_length_E
-- set line cap type
cairo_set_line_cap  (cr, m_cap)
-- set line width
cairo_set_line_width (cr,m_width_E)
-- set color and alpha for marks
cairo_set_source_rgba (cr,mr,mg,mb,ma)
-- START LOOP FOR SECOND MARKS
for i=1,number_marks_E do
-- drawing code using the value of i to calculate degrees
-- calculate start point for 12/24 hour mark
radius=m_start_rad
point=(math.pi/180)*((i-1)*(360/number_marks_E))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set start point for line
cairo_move_to (cr,clock_centerx+x,clock_centery+y)
-- calculate end point for 12/24 hour mark
radius=m_end_rad
point=(math.pi/180)*((i-1)*(360/number_marks_E))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set path for line
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- draw the line-- MARKS AROUND CLOCK A
cairo_stroke (cr)
end-- of for loop
-- SET MARKS ##############################################
-- MARKS AROUND CLOCK A -- Large Main 24 HR Clock
local number_marks_A=init.hour
-- set mark length
local m_length_A=0
-- set mark width
local m_width_A=0
-- set mark line cap type
local m_cap=CAIRO_LINE_CAP_ROUND
-- set mark color and alpha,red blue green alpha
local mr,mg,mb,ma=1,1,1,1 -- opaque white
-- SETUP HOUR HANDS #######################################
-- CLOCK A HOUR HAND
-- set length of hour hand
hh_length_A=130
-- set hour hand width
hh_width_A=3
-- set hour hand line cap
hh_cap=CAIRO_LINE_CAP_ROUND
-- set hour hand color
hhr,hhg,hhb,hha=1,1,1,.5-- fully opaque white
-- SETUP MINUTE HANDS #####################################
-- CLOCK A MINUTE HAND SETUP
-- set length of minute hand
mh_length_A=145
-- set minute hand width
mh_width_A=2
-- set minute hand line cap
mh_cap=CAIRO_LINE_CAP_ROUND
-- set minute hand color
mhr,mhg,mhb,mha=1,1,1,.5-- fully opaque white
-- SETUP SECOND HANDS #####################################
-- CLOCK A SECOND HAND SETUP
-- set length of seconds hand
sh_length_A=150
-- set hour hand width
sh_width_A=2
-- set hour hand line cap
sh_cap=CAIRO_LINE_CAP_ROUND
-- set seconds hand color
shr,shg,shb,sha=1,0,0,1-- fully opaque red
-- CLOCK A ###### 12 HR TIME ##############################
-- Border  SETTINGS
clock_radius=0
clock_centerx=init.center_x
clock_centery=init.center_y
-- DRAWING CODE
-- DRAW BORDER
cairo_set_source_rgba (cr,cbr,cbg,cbb,cba)
cairo_set_line_width (cr,clock_border_width)
cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
cairo_stroke (cr)
-- DRAW MARKS
-- stuff that can be moved outside of the loop, needs only be set once
-- calculate end and start radius for marks
m_end_rad=clock_radius-b_to_m
m_start_rad=m_end_rad-m_length_A
-- set line cap type
cairo_set_line_cap  (cr, m_cap)
-- set line width
cairo_set_line_width (cr,m_width_A)
-- set color and alpha for marks
cairo_set_source_rgba (cr,mr,mg,mb,ma)
-- START LOOP FOR HOUR MARKS
for i=1,number_marks_A do
-- drawing code using the value of i to calculate degrees
-- calculate start point for 12/24 hour mark
radius=m_start_rad
point=(math.pi/180)*((i-1)*(360/number_marks_A))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set start point for line
cairo_move_to (cr,clock_centerx+x,clock_centery+y)
-- calculate end point for 12/24 hour mark
radius=m_end_rad
point=(math.pi/180)*((i-1)*(360/number_marks_A))
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- set path for line
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- draw the line
cairo_stroke (cr)
end-- of for loop
-- HOUR MARKS
-- TIME CALCULATIONS CLOCK A
if clock_type_A==12 then
hours=tonumber(os.date("%I"))
-- convert hours to seconds
h_to_s=hours*60*60
elseif clock_type_A==24 then
hours=tonumber(os.date("%H"))
-- convert hours to seconds
h_to_s=hours*60*60
end
minutes=tonumber(os.date("%M"))
-- convert minutes to seconds
m_to_s=minutes*60
-- get current seconds
seconds=tonumber(os.date("%S"))
-- DRAW HOUR HAND
-- get hours minutes seconds as just seconds
hsecs=h_to_s+m_to_s+seconds
-- calculate degrees for each second
hsec_degs=hsecs*(360/(60*60*clock_type_A))-- use equation ~ eliminate decimals
-- set radius to calculate hand points
radius=hh_length_A
-- set up line attributes and draw line
cairo_set_line_width (cr,hh_width_A)
cairo_set_source_rgba (cr,hhr,hhg,hhb,hha)
cairo_set_line_cap  (cr, hh_cap)
--NEW HAND DRAWING CODE ##################################################
--call hand drawing function
hands(
clock_centerx,--string or coodinate for clock center x
clock_centery,--string or coodinate for clock center y
hsec_degs,--string or value for hand degrees
hh_length_A,--string or value for hand length (radius)
2,--set hand center width in pixels
10,--set hand mid width in degrees
0,--set hand end width in pixels, 0=a point
0.8--number from 0 to 1 as a propotion of total hand length, ie 0.5 is exact middle distance
)

--#########################################################################
-- DRAW MINUTE HAND
-- get minutes and seconds just as seconds
msecs=m_to_s+seconds
-- calculate degrees for each second
msec_degs=msecs*0.1
-- set radius to calculate hand points
radius=mh_length_A
-- set start line coordinates, the center of the circle
cairo_move_to (cr,clock_centerx,clock_centery)
-- calculate coordinates for end of minute hand
point=(math.pi/180)*msec_degs
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))
-- describe the line we will draw
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- set up line attributes and draw line
cairo_set_line_width (cr,mh_width_A)
cairo_set_source_rgba (cr,mhr,mhg,mhb,mha)
cairo_set_line_cap  (cr, mh_cap)
--NEW HAND DRAWING CODE ##################################################
--call hand drawing function
hands(
clock_centerx,--string or coodinate for clock center x
clock_centery,--string or coodinate for clock center y
msec_degs,--string or value for hand degrees
mh_length_A,--string or value for hand length (radius)
2,--set hand center width in pixels
6,--set hand mid width in degrees
0,--set hand end width in pixels, 0=a point
0.75--number from 0 to 1 as a propotion of total hand length, ie 0.5 is exact middle distance
)
-- DRAW SECOND HAND

--[[
-- calculate degrees for each second
sec_degs=seconds*6
-- set radius to calculate hand points
radius=sh_length_A
-- set start line coordinates, the center of the circle
cairo_move_to (cr,clock_centerx,clock_centery)
-- calculate coordinates for end of seconds hand
point=(math.pi/180)*sec_degs
x=0+radius*(math.sin(point))
y=0-radius*(math.cos(point))BOLD
-- describe the line we will draw
cairo_line_to (cr,clock_centerx+x,clock_centery+y)
-- set up line attributes
cairo_set_line_width (cr,sh_width_A)
cairo_set_source_rgba (cr,shr,shg,shb,sha)
cairo_set_line_cap  (cr, sh_cap)
cairo_stroke (cr)
]]
-- ####################################################################
local center_x=init.center_x
local center_y=init.center_y
local radius=init.radius-5
cairo_select_font_face (cr, "Felix Titling", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
cairo_set_font_size (cr, 15)
cairo_set_source_rgba (cr,219/255,168/255,255/255,1) --(cr,194/255,204/255,255/255,1)	-- (cr,1,1,1,1)
-- TABLE OF TEXT -- in order
if init.hour == 12 then 
  text_days={"12","01","02","03","04","05","06","07","08","09","10","11",}
  for i=1,12 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=150
  for i=1,12 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
end
if init.hour == 24 then 
  text_days={"00","01","02","03","04","05","06","07","08","09","10","11","12","13","14","15","16","17","18","19","20","21","22","23",}
  for i=1,24 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/24)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    --local extents=cairo_text_extents_t:create()
    --tolua.takeownership(extents)
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
  end
  -- INNER POINTS POSITION, radius smaller than text circle
  local radius=150
  for i=1,24 do
    local point=(math.pi/180)*((360/24)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
  end
end

-- part of a second hand
--position
--get seconds value
local seconds=tonumber(os.date("%S"))
--calculate rotation of second hand in degrees
if init.line == true then
  local arc=(math.pi/180)*((360/60)*seconds)
  --calculate point 1
  local radius1=140
  local x1=0+radius1*math.sin(arc)
  local y1=0-radius1*math.cos(arc)
  --calculate point 2
  local radius2=158
  local x2=0+radius2*math.sin(arc)
  local y2=0-radius2*math.cos(arc)
  --draw line connecting points-- 255, 138, 255
  cairo_move_to (cr, center_x+x1,center_y+y1)
  cairo_line_to (cr, center_x+x2, center_y+y2)
  cairo_set_source_rgba (cr,255/255,0/255,0/255,1)
  cairo_stroke (cr)
end
-- ####################################################################
-- POSITION FOR TEXT HOUR NUMBERS
--affiche secondes
  if init.hour == 12 and init.second == true then
    text_days={"","1","2","3","4","","6","7","8","9","","11","12","13","14","","16","17","18","19","","21","22","23","24","","26","27","28","29","","31","32","33","34","","36","37","38","39","","41","42","43","44","","46","47","48","49","","51","52","53","54","","56","57","58","59","",} 
    -- INNER POINTS POSITION, radius smaller than text circle
    cairo_set_source_rgba (cr,1,1,1,1)
    cairo_select_font_face (cr, "monofur", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
    for i=1,60 do
      local radius=150
      local point=(math.pi/180)*((360/60)*(i-1))
      local x=0+radius*(math.sin(point))
      local y=0-radius*(math.cos(point))
      if seconds == i-1 then
        cairo_set_source_rgba (cr,46/255,0/255,217/255,1)---point for seconds---
      else
        if i-1 == 0 or i-1 == 5 or i-1 == 10 or i-1 == 15 or i-1 == 25 or i-1 == 30 or i-1 == 35 or i-1 == 40 or i-1 == 45 or i-1 == 50 or i-1 == 55 then
          cairo_set_source_rgba (cr,1,1,1,1)---points for hours
        else
          cairo_set_source_rgba (cr,219/255,168/255,255/255,1)---points for minutes
        end
      end
      cairo_arc (cr,center_x+x,center_y+y,1/2,0,2*math.pi)
      cairo_stroke (cr)
    end
    radius=radius-3
    cairo_set_font_size (cr, 10)
    for i=1,60 do
      -- OUTTER POINTS POSTION FOR TEXT
      local point=(math.pi/180)*((360/60)*(i-1))
      local x=0+radius*(math.sin(point))
      local y=0-radius*(math.cos(point))
      -- CALCULATE CENTRE OF TEXT
      local text=text_days[i]--gets text from table
      if seconds == tonumber(text) then
        cairo_set_source_rgba (cr,0,0,1,1)
      else
        cairo_set_source_rgba (cr,252/255,124/255,0/255,1)
      end
      --local extents=cairo_text_extents_t:create()
      cairo_text_extents(cr,text,extents)
      local width=extents.width
      local height=extents.height
      cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
      cairo_show_text (cr, text)
      cairo_stroke (cr)
    end
  end
-- Fin affiche secondes
-- FONT

-- ########################################################
cairo_stroke (cr)
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
end-- end main function

function rgb_to_r_g_b(col,alp) -- ONLY NEED ONE COPY OF THIS FUNCTION
  return ((col / 0x10000) % 0x100) / 255, ((col / 0x100) % 0x100) / 255, (col % 0x100) / 255, alp
end 

Dernière modification par ragamatrix (Le 30/11/2012, à 13:10)

Hors ligne

#1646 Le 30/11/2012, à 14:59

ragamatrix

Re : [Conky] Alternative à weather.com (2)

@Didier-T
Bon j' ai cherché un peu pour trouver un ancien script dessinant des cadres, que j' ai modifié pour dessiner des ronds...Il y a dans ce script d'autres options que je n'ai pas supprimées.Je ne sais pas si c'est comme ça qu'il faut s'y prendre...En tous cas en test ça donne ça:
cerclesborder
code :

 --border
        {x=120, y=380,w=80,h=80,
        --the missing corners are repeated
        corners={ {"circle",40}, {"circle",40}, {"circle",40}, {"circle",40}},
        border=1
        },

 } 

On choisi la taille du cercle ex: 80
Dans la valeur circle on mets la moitié (40) et voilà une bonne tambouille pour faire des cercles !! lol

Dernière modification par ragamatrix (Le 30/11/2012, à 15:02)

Hors ligne

#1647 Le 03/12/2012, à 10:42

ragamatrix

Re : [Conky] Alternative à weather.com (2)

Je découvre "convert" et je viens d'appliquer un filtre de "sphérisation" sur une carte sat; il s'agit d'un test donc l'image n'est pas d'actualité.
spherisation
lien_sphere_image

Dernière modification par ragamatrix (Le 03/12/2012, à 10:43)

Hors ligne

#1648 Le 03/12/2012, à 22:15

ragamatrix

Re : [Conky] Alternative à weather.com (2)

bon; j'essaie de "sphériser" une image dans conky mais je bloque...
j'en suis là
pour essayer de lancer ce script:

# script gws.sh
wget  http:/188.165.232.130/~meteomc/Images/sat/satireu1.gif
# 
convert satireu1.gif satireu1.png 
-resize 300x300   sphere_lut.png   
-fx 'p{ v*w, j }' sphere_overlay.png   
-compose HardLight  -composite  sphere_mask.png -alpha off 
-compose CopyOpacity -composite sphere_satireu1.png
  

Je dois avoir fais quelques erreurs de syntaxe mais je ne trouve pas sad

Dernière modification par ragamatrix (Le 03/12/2012, à 22:18)

Hors ligne

#1649 Le 04/12/2012, à 07:08

Didier-T

Re : [Conky] Alternative à weather.com (2)

@ ragamatrix,

tu peut déjà changer l'adresse de ton image, il semble que wget est du mal avec les ip.
pour le reste, sa me semble étrange que d'une ligne a l'autre il sache que tu veux utiliser convert, donc je ferais ceci.

wget  http://www.meteo-mc.fr/dedie/Images/sat/satireu1.gif
convert satireu1.gif satireu1.png 
convert -resize 300x300   sphere_lut.png   
convert -fx 'p{ v*w, j }' sphere_overlay.png   
convert -compose HardLight  -composite  sphere_mask.png -alpha off 
convert -compose CopyOpacity -composite sphere_satireu1.png

dans le même temps, le plus calé par ici sur convert en particulier et imagemagick en général, ce n'est pas moi, mais jpdipsy

Hors ligne

#1650 Le 04/12/2012, à 08:22

jpdipsy

Re : [Conky] Alternative à weather.com (2)

j'arrive,j'arrive ........
@ ragamatrix,

il te manque sphere.lut et overlay donc:

#!/bin/bash


wget  http://www.meteo-mc.fr/dedie/Images/sat/satireu1.gif

#creation du masque 
convert -size 300x300 xc:black -fill white -draw 'circle 149.5,149.5 149.5,0'   masque.png

convert -size 300x300 xc:  -channel R  -fx 'yy=(j+.5)/h-.5; (i/w-.5)/(sqrt(1-4*yy^2))+.5' \
-separate  +channel     sphere_lut.png

convert masque.png \
 \( +clone -blur 0x20 -shade 110x21.7 -contrast-stretch 0% \
 +sigmoidal-contrast 6x50% -fill grey50 -colorize 10%  \) \
 -composite overlay.png

convert satireu1.gif satireu1.png

convert satireu1.png -resize 300x300   sphere_lut.png   -fx 'p{ v*w, j }' \
overlay.png   -compose HardLight  -composite \
masque.png -alpha off -compose CopyOpacity -composite \
sphere_satireu1.png

le résultat :
resultat

et sans l'effet "bouton"

#!/bin/bash


wget  http://www.meteo-mc.fr/dedie/Images/sat/satireu1.gif

#creation du masque 
convert -size 300x300 xc:black -fill white -draw 'circle 149.5,149.5 149.5,0'   masque.png

convert -size 300x300 xc:  -channel R  -fx 'yy=(j+.5)/h-.5; (i/w-.5)/(sqrt(1-4*yy^2))+.5' \
          -separate  +channel     sphere_lut.png

convert satireu1.gif satireu1.png

convert satireu1.png -resize 300x300   sphere_lut.png   -fx 'p{ v*w, j }' \
masque.png -alpha off -compose CopyOpacity -composite \
sphere_satireu1.png

le résultat

resultat

Dernière modification par jpdipsy (Le 04/12/2012, à 08:40)

Hors ligne

Haut de page ↑