#1 Le 31/01/2012, à 11:36
- marseillois
Installation EKD & GMIC
Bonjourà tous et merci d'avance
Un ordinateur de bureau sous Lucid , avec mises à jour LTS only
Pour installer EKD (+GMic ) j'ai
copié dans /etc/apt/sources.list les deux lignes suivantes :
## EKD deb
http /download.tuxfamily.org/ekdforum/ekd lucid contrib
## apt reposity for G’MIC
deb http://download.tuxfamily.org/ekdforum/ … c/gmic_apt lucid contrib
Lorsque je lance
braghini@casegerard:~$ sudo apt-get update
[sudo] password for braghini:
E: Le type « http » est inconnu sur la ligne 56 dans la liste des sources /etc/apt/sources.list
braghini@casegerard:~$
J'ai le même message si je veux ouvrir Synaptic pour faire une recherche
Le contenu de ma source list :
braghini@casegerard:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ lucid main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ lucid main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ lucid universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid universe
deb http://fr.archive.ubuntu.com/ubuntu/ lucid-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ lucid multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ lucid-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid-updates multiverse
## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://fr.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu lucid partner
deb-src http://archive.canonical.com/ubuntu lucid partner
deb http://security.ubuntu.com/ubuntu lucid-security main restricted
deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted
deb http://security.ubuntu.com/ubuntu lucid-security universe
deb-src http://security.ubuntu.com/ubuntu lucid-security universe
deb http://security.ubuntu.com/ubuntu lucid-security multiverse
deb-src http://security.ubuntu.com/ubuntu lucid-security multiverse
## EKD deb
http /download.tuxfamily.org/ekdforum/ekd lucid contrib
## apt reposity for G’MIC
deb http://download.tuxfamily.org/ekdforum/ … c/gmic_apt lucid contrib
Lorsque je commente les lignes correspondant à EKD & GMic tout fonctionne normalement
Quelqu'un pourrait-il m'aider à corriger l'erreur pour disposer normalement de ces deux sources de mises à jour
Un grand merci d'avance
Hors ligne
#2 Le 31/01/2012, à 12:03
- li.re
Re : Installation EKD & GMIC
Bonjour marseillois
les 5 dernières lignes de ton fichier /etc/apt/sources.list
doivent ressembler à ceci
## EKD deb
deb http://download.tuxfamily.org/ekdforum/ekd lucid contrib
## apt reposity for G’MIC
deb http://download.tuxfamily.org/ekdforum/ekd/gmic/gmic_apt lucid contrib
Une fois ton fichier /etc/apt/sources.list modifié et sauvegardé,
réactualises la liste de tes dépôts
sudo apt-get update
Ça devrait être bon
Dernière modification par li.re (Le 31/01/2012, à 12:03)
Hors ligne
#3 Le 31/01/2012, à 14:46
- marseillois
Re : Installation EKD & GMIC
Salut et merci li.re
Voilà le résultat des corrections
je relance au terminal :
braghini@casegerard:~$ sudo apt-get update
Réception de : 1 http://download.tuxfamily.org lucid Release.gpg [490B]
….....
qui se déroulle bien, jusqu'à la lecture qui se termine par
…..
5 896o réceptionnés en 0s (9 267o/s)
Lecture des listes de paquets... Fait
W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ lucid/partner Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_lucid_partner_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
chaque fois que je relance "apt-get update"
Merci pour ton attention
Hors ligne
#4 Le 03/02/2012, à 15:14
- monsitt
Re : Installation EKD & GMIC
Bonjours marseillois ,
Je suis le créateur et développeur d'EnKoDeur-Mixeur (depuis fin 2008 nous sommes 3 développeurs dans le projet). Au fait tu t'es inscrit sur sur l'ancien forum d'EKD et je t'ais envoyé un mail pour que tu t'inscrives sur les nouveaux forums et tu ne m'a pas répondu (et tu ne t'y es pas inscrit comme je te l'ai expliqué dans le mail). Tu aurais dû faire cette demande directement sur les nouveaux forums d'EKD.
Venons-en à ta demande, voilà ce que tu dois mettre dans ton /etc/apt/sources.list (tu ouvres, par exemple, ton sources.list dans gedit [par la commande: sudo gedit /etc/apt/sources.list] et tu enregistres après l'avoir modifié (comme indiqué):
## EKD deb
deb http://download.tuxfamily.org/ekdforum/ekd lucid contrib
## apt reposity for G’MIC
deb http://download.tuxfamily.org/ekdforum/ekd/gmic/gmic_apt lucid contrib
Ensuite tu ajoutes la clé de chiffrage d'EKD par la commande:
wget http://download.tuxfamily.org/ekdforum/ekd/cle-ekd.key.asc -O - | sudo apt-key add -
Après tu recharges ton sources.list par la commande:
sudo apt-get update
Et pour finir tu installes G'MIC et EKD, par la commande:
sudo apt-get install gmic ekd
Voilà la documentation complète (les didacticiels) et le blog officiel (où j'écris des articles régulièrement sur les nouvelles fonctionnalités et améliorations au fur et à mesure de l'avancée du développement).
a+
Hors ligne
#5 Le 04/04/2012, à 11:09
- utnubu111
Re : Installation EKD & GMIC
Bonjour Monsitt et merci pour EKD.
Je travaille sur un dessin animée court métrage (vingt minutes )avec Pencil.
Pencil n'exporte pas l'animation comme un film sous Linux.L'exportation comme l'image,c'est ok.
Alors,je doit monter mon film avec un autre logiciel.
Monter les images avec OpenShot ou Pitivi n'est pas si pratique.Il faut régler la durée des images une à une.
J'ai l'installé EKD hier soir en espérant que je vais monter les images (en png) plus facile.
Conversion d'images en vidéo/Ajouter/Appliquer ; EKD devient gris pour quelques minutes,
puis il me demande l'emplacement d'enregistrement du fichier,etc..
Voici la réponse de EKD:
ffmpeg -r 25 -s 964x622 -f image2 -i "/home/h/.ekd_tmp/ekd_h/%08d.png" -b 1800 -vcodec mpeg1video -qscale 1 -y "/home/h/Bureau/1.mpg"
ffmpeg version 0.7.3-4:0.7.3-0ubuntu0.11.10.1, Copyright (c) 2000-2011 the Libav developers
built on Jan 4 2012 16:21:50 with gcc 4.6.1
configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static
WARNING: library configuration mismatch
avutil configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
avcodec configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
avformat configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
avdevice configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
avfilter configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
swscale configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
postproc configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libavutil 51. 7. 0 / 51. 7. 0
libavcodec 53. 6. 0 / 53. 6. 0
libavformat 53. 3. 0 / 53. 3. 0
libavdevice 53. 0. 0 / 53. 0. 0
libavfilter 2. 4. 0 / 2. 4. 0
libswscale 2. 0. 0 / 2. 0. 0
libpostproc 52. 0. 0 / 52. 0. 0
Input #0, image2, from '/home/h/.ekd_tmp/ekd_h/%08d.png':
Duration: 00:00:03.32, start: 0.000000, bitrate: N/A
Stream #0.0: Video: png, yuv420p, 964x622, 25 fps, 25 tbr, 25 tbn, 25 tbc
[buffer @ 0x860f7c0] w:964 h:622 pixfmt:yuv420p
Une erreur est survenuelors de l'encodage
Hors ligne