- Accueil
- » Forum
- » WiFi
- » Lubuntu Wifi
Pages : 1
Discussion fermée
#1 Le 02/02/2012, à 02:32
- neeteex
Lubuntu Wifi
Bonjour,
J'ai une installe toute fraiche de Lubuntu 11.10, qui tourne mieux que Ubuntu sur ce vieux portable , mais... pas de wifi
Je patine un peu en lisant la doc, si qqun a la clef je suis preneur.
Quelques infos cruciales :
# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"
Bon ça je l'ai déjà dit.
# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1241:1177 Belkin F8E842-DL Mouse
Donc rien d'autre que ma souris sur USB
# lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:10.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
00:10.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
00:10.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
00:10.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
00:11.0 Network controller: Ralink corp. RT2500 802.11g (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:1b.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 50)
00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:1d.0 Audio device: ALi Corporation High Definition Audio/AC'97 Host Controller
00:1e.0 ISA bridge: ALi Corporation PCI to LPC Controller (rev 31)
00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
Ca se corse : y a pourtant rien de branché !
# sudo lshw -C network
*-network:0
description: Wireless interface
product: RT2500 802.11g
vendor: Ralink corp.
physical id: 11
bus info: pci@0000:00:11.0
logical name: wlan0
version: 01
serial: 00:10:60:63:52:03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rt2500pci driverversion=3.0.0-15-generic firmware=N/A latency=64 link=no multicast=yes wireless=IEEE 802.11bg
resources: irq:19 memory:ffffe000-ffffffff
*-network:1
description: Ethernet interface
product: ULi 1689,1573 integrated ethernet.
vendor: ALi Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
logical name: eth0
version: 50
serial: 00:40:d0:85:de:9a
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=uli526x driverversion=0.9.3 duplex=full ip=192.168.1.65 latency=128 link=yes maxlatency=40 mingnt=20 multicast=yes port=MII speed=100Mbit/s
resources: irq:20 ioport:e000(size=256) memory:d000a300-d000a3ff
Tout ça ??? Bref, ma carte si je comprends bien est celle-ci : product: RT2500 802.11g
Ce que je ne sais pas encore c'est si elle relève de ce bug :
https://bugzilla.kernel.org/show_bug.cgi?id=13362
Je n'ai pas pu aller bien loin sur cette doc correspondante car je butte sur la première commande :
# wget http://rt2x00.serialmonkey.com/rt2500-cvs-daily.tar.gz
--2012-02-02 00:51:22-- http://rt2x00.serialmonkey.com/rt2500-cvs-daily.tar.gz
Résolution de rt2x00.serialmonkey.com... 202.40.167.123
Connexion vers rt2x00.serialmonkey.com|202.40.167.123|:80... connecté.
requête HTTP transmise, en attente de la réponse... 404 Not Found
2012-02-02 00:51:23 ERREUR 404: Not Found.
Donc je continue l'inventaire :
# lsmod
Module Size Used by
rfcomm 38408 0
bnep 17923 2
bluetooth 148839 8 rfcomm,bnep
parport_pc 32114 0
ppdev 12849 0
binfmt_misc 17292 1
snd_hda_codec_si3054 12864 1
snd_hda_codec_realtek 254125 1
snd_hda_intel 24262 1
arc4 12473 2
snd_hda_codec 91859 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13276 1 snd_hda_codec
snd_pcm 80435 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_seq_midi 13132 0
radeon 925178 2
rt2500pci 22948 0
rt2x00pci 14202 1 rt2500pci
rt2x00lib 48146 2 rt2500pci,rt2x00pci
ttm 65224 1 radeon
snd_rawmidi 25241 1 snd_seq_midi
joydev 17393 0
tifm_7xx1 12937 0
snd_seq_midi_event 14475 1 snd_seq_midi
drm_kms_helper 32889 1 radeon
tifm_core 15040 1 tifm_7xx1
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
snd_timer 28932 2 snd_pcm,snd_seq
pcmcia 39822 0
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 55902 12 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211 393459 2 rt2x00pci,rt2x00lib
drm 192194 4 radeon,ttm,drm_kms_helper
i2c_ali15x3 12878 0
cfg80211 172427 2 rt2x00lib,mac80211
i2c_algo_bit 13199 1 radeon
psmouse 73673 0
serio_raw 12990 0
i2c_ali1535 12777 0
soundcore 12600 1 snd
k8temp 12905 0
snd_page_alloc 14115 2 snd_hda_intel,snd_pcm
yenta_socket 27428 0
pcmcia_rsrc 18367 1 yenta_socket
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
shpchp 32356 0
eeprom_93cx6 12653 1 rt2500pci
ati_agp 13242 0
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
usbhid 41905 0
hid 77367 1 usbhid
pata_ali 13562 3
sdhci_pci 13658 0
sdhci 27360 1 sdhci_pci
uli526x 22402 0
firewire_ohci 35854 0
firewire_core 56937 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
RT 2500 PCI s'y trouve, c'est déjà ça. Ce qui me renvoit à cette doc.
Là c'est le make qui pose problème:
# make
make[1]: entrant dans le répertoire « /usr/src/linux-headers-3.0.0-15-generic »
Building modules, stage 2.
MODPOST 0 modules
make[1]: quittant le répertoire « /usr/src/linux-headers-3.0.0-15-generic »
rt2500.ko failed to build!
make: *** [module] Erreur 1
Comme je ne sais pas quoi en faire malgré différentes recherches je poursuis :
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Ca semble donc marcher...
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:40:d0:85:de:9a
inet adr:192.168.1.65 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::240:d0ff:fe85:de9a/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:36977 erreurs:0 :0 overruns:0 frame:0
TX packets:23379 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:40079172 (40.0 MB) Octets transmis:2332860 (2.3 MB)
Interruption:20 Adresse de base:0xe000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:10:60:63:52:03
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Malheureusement aucun échange
# sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Device or resource busy
Intéressant : ma carte qui ne fait rien est en mode "occupée"
# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
#NetworkManager#iface eth0 inet dhcp
Bon, je sais pas si la dernière ligne commentée est pas un peu en cause, mais la décommenter ne m'a pas connecté.
# nm-tool
NetworkManager Tool
State: connected (global)
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: rt2500pci
State: disconnected
Default: no
HW Address: 00:10:60:63:52:03
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
- Device: eth0 [Wired connection 1] -------------------------------------------
Type: Wired
Driver: uli526x
State: connected
Default: yes
HW Address: 00:40:D0:85:DE:9A
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.65
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.254
DNS: 192.168.1.254
C'est clair, je suis "disconnected"
# uname -r -m
3.0.0-15-generic i686
Sans surprise
# sudo rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Pas de blocage alors... Pourquoi ça marche pas
Hors ligne
#2 Le 06/02/2012, à 12:42
- neeteex
Re : Lubuntu Wifi
Un petit up pour redemander conseil : que faire d'une carte wifi "busy" ?
Merci
# sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Device or resource busy
Hors ligne
#3 Le 25/03/2013, à 10:44
- neeteex
Re : Lubuntu Wifi
Bonjour,
Je relance ce fil car je me rends compte que le problème se reproduit sur au moins une autre machine : wifi 100 % fonctionnel sous Ubuntu 12.04 (installé ou live CD) sans formalité, et impossible d'accès sous Lubuntu 12.04 (installé ou live CD).
Actuellement j'ai suivi ce conseil, mais je me retrouve avec une notification de réseau wifi indiquant "connexion sans fil limitée ou inexistante" au passage de la souris, et "aucun réseau sans fil détecté" si je clic dessus.
Comment se fait-il qu'une "simple" modification de bureau désactive la fonctionnalité wifi ?
Hors ligne
#4 Le 25/03/2013, à 11:17
- neeteex
Re : Lubuntu Wifi
Testé et sans effet :
raphaelle@raphaelle:~$ sudo rm /var/lib/NetworkManager/NetworkManager.state
[sudo] password for raphaelle:
raphaelle@raphaelle:~$ sudo rfkill unblock all
raphaelle@raphaelle:~$ sudo modprobe ath9k
raphaelle@raphaelle:~$ sudo service network-manager restart
network-manager stop/waiting
network-manager start/running, process 2203
raphaelle@raphaelle:~$
Hors ligne
#5 Le 26/03/2013, à 15:44
- neeteex
Re : Lubuntu Wifi
Fatigué de soliloquer, je propose la suite ici... et je me tais !
Hors ligne
#6 Le 26/03/2013, à 16:24
- ljere
Re : Lubuntu Wifi
modération: sujet fermé, rappel des règles:
Les doublons ou les multi-postages afin d'obtenir plus de réponses sont interdits. Le "up" doit être utilisé avec modération.
ancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon
Hors ligne
Pages : 1
Discussion fermée
- Forum
- » WiFi
- » Lubuntu Wifi