Ubuntu-fr

tridoo

probleme wifi (malgré de nombreuses tentatives)

bonjour tout le monde,
J'avoue que je commence à saturer... Cela fait deux jours que je fais des recherches sur le net (et les manips correspondantes) mais rien n'y fait!!
Ma carte wifi intégrée est une artheros xxxx donc j'ai essayé de suivre les manips indiqués dans des posts sur ce forum pour utiliser madwifi... ouallou!!!
Pas de découragement, j'essaye l'installation des drivers windows avec ndiswrapper.... même résultat!   :-(
Je ne sais plus quoi faire !! 
Je suis un tout nouveau venu et je ne peux que suivre à la lettre ce que je trouve de ci de là...
je vous donne le retour de dmesg :

Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[17179569.184000]  BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
[17179569.184000]  BIOS-e820: 0000000037ea0000 - 0000000037eaf000 (ACPI data)
[17179569.184000]  BIOS-e820: 0000000037eaf000 - 0000000037f00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 894MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f7f00
[17179569.184000] On node 0 totalpages: 229024
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 224928 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7ed0
[17179569.184000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x37eaa467
[17179569.184000] ACPI: FADT (v001 FUJ    W37      0x06040000 W37  0x000f4240) @ 0x37eaee20
[17179569.184000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x37eaee94
[17179569.184000] ACPI: MADT (v001 PTLTD         APIC   0x06040000  LTP 0x00000000) @ 0x37eaef6a
[17179569.184000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x37eaefc4
[17179569.184000] ACPI: DSDT (v001 FUJ    W37      0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: PM-Timer IO Port: 0x8008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda8 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 800.101 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.244000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.244000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.272000] Memory: 898264k/916096k available (1910k kernel code, 17312k reserved, 1070k data, 308k init, 0k highmem)
[17179569.272000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.352000] Calibrating delay using timer specific routine.. 1603.04 BogoMIPS (lpj=3206088)
[17179569.352000] Security Framework v1.0.0 initialized
[17179569.352000] SELinux:  Disabled at boot.
[17179569.352000] Mount-cache hash table entries: 512
[17179569.352000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.352000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.352000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.352000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.352000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179569.352000] Checking 'hlt' instruction... OK.
[17179569.368000] SMP alternatives: switching to UP code
[17179569.368000] Freeing SMP alternatives: 16k freed
[17179569.368000] checking if image is initramfs... it is
[17179570.504000] Freeing initrd memory: 5564k freed
[17179570.504000] ACPI: Core revision 20060707
[17179570.512000] ACPI: Looking for DSDT ... not found!
[17179570.516000] CPU0: AMD Turion(tm) 64 Mobile Technology ML-32 stepping 02
[17179570.516000] Total of 1 processors activated (1603.04 BogoMIPS).
[17179570.516000] ENABLING IO-APIC IRQs
[17179570.516000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.516000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[17179570.516000] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[17179570.516000] ...trying to set up timer as Virtual Wire IRQ... works.
[17179570.700000] Brought up 1 CPUs
[17179570.700000] migration_cost=0
[17179570.700000] NET: Registered protocol family 16
[17179570.700000] EISA bus registered
[17179570.700000] ACPI: bus type pci registered
[17179570.700000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179570.700000] PCI: Not using MMCONFIG.
[17179570.712000] PCI: PCI BIOS revision 2.10 entry at 0xfd69c, last bus=2
[17179570.712000] PCI: Using configuration type 1
[17179570.712000] Setting up standard PCI resources
[17179570.720000] ACPI: Interpreter enabled
[17179570.720000] ACPI: Using IOAPIC for interrupt routing
[17179570.724000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.724000] PCI: Probing PCI hardware (bus 00)
[17179570.732000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179570.732000] Boot video device is 0000:01:05.0
[17179570.732000] PCI: Transparent bridge - 0000:00:14.4
[17179570.732000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[17179570.732000] Please report the result to linux-kernel to fix this permanently
[17179570.732000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.740000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[17179570.744000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[17179570.744000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[17179570.744000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[17179570.744000] ACPI: Embedded Controller [EC0] (gpe 3) interrupt mode.
[17179570.792000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[17179570.792000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179570.796000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.796000] pnp: PnP ACPI init
[17179570.804000] pnp: PnP ACPI: found 10 devices
[17179570.804000] PnPBIOS: Disabled by ACPI PNP
[17179570.804000] PCI: Using ACPI for IRQ routing
[17179570.804000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.816000] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[17179570.816000] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[17179570.816000] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[17179570.816000] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
[17179570.816000] PCI: Bridge: 0000:00:01.0
[17179570.816000]   IO window: 9000-9fff
[17179570.816000]   MEM window: c0100000-c01fffff
[17179570.816000]   PREFETCH window: c8000000-cfffffff
[17179570.816000] PCI: Bus 3, cardbus bridge: 0000:02:09.0
[17179570.816000]   IO window: 0000a400-0000a4ff
[17179570.816000]   IO window: 0000a800-0000a8ff
[17179570.816000]   PREFETCH window: 50000000-51ffffff
[17179570.816000]   MEM window: 52000000-53ffffff
[17179570.816000] PCI: Bridge: 0000:00:14.4
[17179570.816000]   IO window: a000-afff
[17179570.816000]   MEM window: c0200000-c02fffff
[17179570.816000]   PREFETCH window: 50000000-51ffffff
[17179570.816000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179570.816000] NET: Registered protocol family 2
[17179570.852000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.852000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179570.852000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.852000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.852000] TCP reno registered
[17179570.856000] audit: initializing netlink socket (disabled)
[17179570.856000] audit(1165575939.856:1): initialized
[17179570.856000] VFS: Disk quotas dquot_6.5.1
[17179570.856000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.856000] Initializing Cryptographic API
[17179570.856000] io scheduler noop registered
[17179570.856000] io scheduler anticipatory registered
[17179570.856000] io scheduler deadline registered
[17179570.856000] io scheduler cfq registered (default)
[17179570.856000] isapnp: Scanning for PnP cards...
[17179571.212000] isapnp: No Plug & Play device found
[17179571.252000] Real Time Clock Driver v1.12ac
[17179571.252000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.252000] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 185
[17179571.252000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[17179571.252000] mice: PS/2 mouse device common for all mice
[17179571.256000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.256000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.256000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.256000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.268000] i8042.c: Detected active multiplexing controller, rev 1.9.
[17179571.272000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179571.276000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179571.276000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179571.276000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179571.276000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.280000] EISA: Probing bus 0 at eisa.0
[17179571.280000] Cannot allocate resource for EISA slot 1
[17179571.280000] Cannot allocate resource for EISA slot 8
[17179571.280000] EISA: Detected 0 cards.
[17179571.280000] TCP bic registered
[17179571.280000] NET: Registered protocol family 1
[17179571.280000] NET: Registered protocol family 8
[17179571.280000] NET: Registered protocol family 20
[17179571.280000] Using IPI No-Shortcut mode
[17179571.280000] ACPI: (supports S0 S3 S4 S5)
[17179571.280000] Freeing unused kernel memory: 308k freed
[17179572.536000] Capability LSM initialized
[17179572.596000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.664000] ACPI: Thermal Zone [TZS0] (48 C)
[17179572.692000] ACPI: Thermal Zone [TZS2] (50 C)
[17179573.364000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179573.364000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
[17179573.364000] ATIIXP: chipset revision 0
[17179573.364000] ATIIXP: not 100% native mode: will probe irqs later
[17179573.364000]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[17179573.364000]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[17179573.368000] Probing IDE interface ide0...
[17179573.656000] hda: SAMSUNG HM100JC, ATA DISK drive
[17179574.328000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.768000] Probing IDE interface ide1...
[17179575.508000] hdc: _NEC DVD_RW ND-6750A, ATAPI CD/DVD-ROM drive
[17179576.180000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.200000] hda: max request size: 512KiB
[17179576.212000] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[17179576.216000] hda: cache flushes supported
[17179576.216000]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
[17179576.432000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.432000] Uniform CD-ROM driver Revision: 3.20
[17179577.148000] usbcore: registered new driver usbfs
[17179577.148000] usbcore: registered new driver hub
[17179577.152000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179577.152000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[17179577.152000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179577.156000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[17179577.372000] ohci_hcd 0000:00:13.0: irq 201, io mem 0xc0000000
[17179577.432000] usb usb1: configuration #1 chosen from 1 choice
[17179577.432000] hub 1-0:1.0: USB hub found
[17179577.432000] hub 1-0:1.0: 4 ports detected
[17179577.536000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[17179577.536000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179577.536000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[17179577.740000] ieee1394: Initialized config rom entry `ip1394'
[17179577.752000] ohci_hcd 0000:00:13.1: irq 201, io mem 0xc0001000
[17179577.812000] usb usb2: configuration #1 chosen from 1 choice
[17179577.812000] hub 2-0:1.0: USB hub found
[17179577.812000] hub 2-0:1.0: 4 ports detected
[17179577.916000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[17179577.916000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179577.916000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[17179577.916000] ehci_hcd 0000:00:13.2: irq 201, io mem 0xc0002000
[17179577.916000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.916000] usb usb3: configuration #1 chosen from 1 choice
[17179577.916000] hub 3-0:1.0: USB hub found
[17179577.916000] hub 3-0:1.0: 8 ports detected
[17179578.020000] ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 21 (level, low) -> IRQ 169
[17179578.068000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[c0216800-c0216fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179578.136000] Attempting manual resume
[17179578.240000] kjournald starting.  Commit interval 5 seconds
[17179578.240000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.524000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[17179578.732000] usb 1-1: configuration #1 chosen from 1 choice
[17179590.964000] input: PC Speaker as /class/input/input0
[17179591.972000] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 185
[17179592.084000] MC'97 1 converters and GPIO not ready (0xff00)
[17179592.096000] ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 185
[17179592.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179592.284000] Linux agpgart interface v0.101 (c) Dave Jones
[17179592.616000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179592.636000] ath_hal: module license 'Proprietary' taints kernel.
[17179592.636000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[17179593.260000] wlan: 0.8.4.2 (0.9.2)
[17179593.260000] ath_rate_sample: 1.2 (0.9.2)
[17179593.276000] ath_pci: 0.9.4.5 (0.9.2)
[17179593.276000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179593.884000] 8139too Fast Ethernet driver 0.9.27
[17179593.964000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179593.964000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179593.964000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[17179593.964000] wifi0: mac 7.8 phy 4.5 radio 5.6
[17179593.964000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[17179593.964000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[17179593.964000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[17179593.964000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[17179593.964000] wifi0: Use hw queue 8 for CAB traffic
[17179593.964000] wifi0: Use hw queue 9 for beacons
[17179594.028000] wifi0: Atheros 5212: mem=0xc0200000, irq=177
[17179594.028000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179594.028000] Yenta: CardBus bridge found at 0000:02:09.0 [1734:1092]
[17179594.028000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179594.028000] Yenta: Routing CardBus interrupts to PCI
[17179594.028000] Yenta TI: socket 0000:02:09.0, mfunc 0x010a1b22, devctl 0x64
[17179594.260000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
[17179594.260000] Socket status: 30000006
[17179594.260000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[17179594.260000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[17179594.260000] cs: IO port probe 0xa000-0xafff: clean.
[17179594.260000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[17179594.260000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[17179594.272000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 209
[17179594.272000] eth0: RealTek RTL8139 at 0xf88ec000, 00:0a:e4:b6:e8:8d, IRQ 209
[17179594.272000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179594.284000] ACPI: PCI Interrupt 0000:02:09.3[A] -> GSI 20 (level, low) -> IRQ 177
[17179594.304000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179594.344000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000
[17179594.376000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179594.380000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[17179594.684000] ts: Compaq touchscreen protocol output
[17179594.740000] usbcore: registered new driver hiddev
[17179594.748000] input: Logitech USB Receiver as /class/input/input2
[17179594.752000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1
[17179594.752000] usbcore: registered new driver usbhid
[17179594.752000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179594.900000] cs: IO port probe 0x100-0x3af: clean.
[17179594.900000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179594.904000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[17179594.904000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[17179594.904000] cs: IO port probe 0xa00-0xaff: clean.
[17179594.984000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179596.104000] NET: Registered protocol family 17
[17179596.188000] lp: driver loaded but no devices found
[17179596.248000] SCSI subsystem initialized
[17179596.260000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179596.260000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179596.312000] Adding 2554292k swap on /dev/disk/by-uuid/d10fa7db-1a58-4b6b-9e41-85a09f2593f0.  Priority:-1 extents:1 across:2554292k
[17179596.540000] EXT3 FS on hda8, internal journal
[17179596.952000] kjournald starting.  Commit interval 5 seconds
[17179596.960000] EXT3 FS on hda9, internal journal
[17179596.960000] EXT3-fs: mounted filesystem with ordered data mode.
[17179597.024000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179597.080000] NTFS volume version 3.1.
[17179597.112000] NTFS volume version 3.1.
[17179597.160000] NTFS volume version 3.1.
[17179597.200000] NTFS volume version 3.1.
[17179597.832000] NET: Registered protocol family 10
[17179597.832000] lo: Disabled Privacy Extensions
[17179597.836000] IPv6 over IPv4 tunneling driver
[17179602.692000] ACPI: AC Adapter [ADP1] (on-line)
[17179602.960000] ACPI: Battery Slot [BAT0] (battery present)
[17179602.988000] ACPI: Power Button (FF) [PWRF]
[17179602.988000] ACPI: Lid Switch [LID0]
[17179602.988000] ACPI: Sleep Button (CM) [SLPB]
[17179603.240000] ibm_acpi: ec object not found
[17179603.288000] pcc_acpi: loading...
[17179603.476000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179603.476000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179603.804000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179603.804000] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4 (1450 mV)
[17179603.804000] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV)
[17179603.804000] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[17179603.804000] cpu_init done, current fid 0x0, vid 0x16
[17179606.048000] apm: BIOS not found.
[17179607.848000] eth0: no IPv6 routers present
[17179608.536000] ath0: no IPv6 routers present
[17179612.128000] Bluetooth: Core ver 2.8
[17179612.128000] NET: Registered protocol family 31
[17179612.128000] Bluetooth: HCI device and connection manager initialized
[17179612.128000] Bluetooth: HCI socket layer initialized
[17179612.152000] Bluetooth: L2CAP ver 2.8
[17179612.152000] Bluetooth: L2CAP socket layer initialized
[17179612.180000] Bluetooth: RFCOMM socket layer initialized
[17179612.180000] Bluetooth: RFCOMM TTY layer initialized
[17179612.180000] Bluetooth: RFCOMM ver 1.7
[17179626.260000] input: AT Translated Set 2 keyboard as /class/input/input3
[17179788.172000] APIC error on CPU0: 00(40)
[17180457.276000] ath0: no IPv6 routers present
[17180838.168000] APIC error on CPU0: 40(40)
[17180951.476000] acer_acpi: Acer Laptop ACPI Extras version 0.3
[17181387.324000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[17182190.440000] ath0: no IPv6 routers present
[17182207.272000] eth0: link down
[17182222.464000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17182320.928000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17182331.176000] eth0: no IPv6 routers present
[17182783.204000] ndiswrapper version 1.31 loaded (preempt=no,smp=yes)
[17182783.252000] usbcore: registered new driver ndiswrapper

En esperant qu'un linuxien voudra bien aidé un nouveau venu à deux doigts de lâcher l'affaire ....
Merci d'avance!

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

une autre info : ma carte wifi semble "montée" en ath0.
Seulement, quand je vais dans administration > outils reseau, il ne se passe rien en ath0 alors que wifi0 semble emettre?!    kesako?
Il semblerait qu'il y ait un conflit à ce niveau(??) ....

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

deja tu as un probleme.
Si tu regarde ton dmesg, tu voit que la carte wifi est bien reconnue par ubuntu puisque qu'il te charge une carte ath0. A prioris tu n'avait donc besoin de toucher a rien ta carte est reconnue d'entrée.

[17179592.636000] ath_hal: module license 'Proprietary' taints kernel.
[17179592.636000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[17179593.260000] wlan: 0.8.4.2 (0.9.2)
[17179593.260000] ath_rate_sample: 1.2 (0.9.2)
[17179593.276000] ath_pci: 0.9.4.5 (0.9.2)
[17179593.276000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179593.884000] 8139too Fast Ethernet driver 0.9.27
[17179593.964000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179593.964000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179593.964000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[17179593.964000] wifi0: mac 7.8 phy 4.5 radio 5.6
[17179593.964000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[17179593.964000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[17179593.964000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[17179593.964000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[17179593.964000] wifi0: Use hw queue 8 for CAB traffic
[17179593.964000] wifi0: Use hw queue 9 for beacons
[17179594.028000] wifi0: Atheros 5212: mem=0xc0200000, irq=177

Commence par desinstaller ndiswrapper car maintenant tu va avoir un conflit entre les deux.
Ensuite verifie que tu as bien le paquet wireless-tools d'installé.

Une fois que tu aura fait ca, tu redemarre ton pc et tu donne le resultat des commandes:

ifconfig
iwconfig

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

J'ai suivi tes instructions.
Maintenant iwconfig donne :

lo        no wireless extensions.

eth0      no wireless extensions.

wifi0     no wireless extensions.

ath0      IEEE 802.11g  ESSID:"cylab" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: Not-Associated   
          Bit Rate:0 kb/s   Tx-Power:16 dBm   Sensitivity=0/3 
          Retry:off   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=0/94  Signal level=-95 dBm  Noise level=-95 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

sit0      no wireless extensions.

et ifconfig :

ath0      Lien encap:Ethernet  HWaddr 00:C0:A8:AB:F1:95 
          adr inet6: fe80::2c0:a8ff:feab:f195/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)

eth0      Lien encap:Ethernet  HWaddr 00:0A:E4:B6:E8:8D 
          inet adr:192.168.0.2  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::20a:e4ff:feb6:e88d/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:120 erreurs:0 :0 overruns:0 frame:0
          TX packets:124 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:103310 (100.8 KiB) Octets transmis:11708 (11.4 KiB)
          Interruption:209 Adresse de base:0x2000

lo        Lien encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:2 erreurs:0 :0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:100 (100.0 b) Octets transmis:100 (100.0 b)

wifi0     Lien encap:UNSPEC  HWaddr 00-C0-A8-AB-F1-95-00-00-00-00-00-00-00-00-00-00 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:334 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:199
          Octets reçus:0 (0.0 b) Octets transmis:16199 (15.8 KiB)
          Interruption:177 Mémoire:f8aa0000-f8ab0000

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

ta carte est donc bien ath0 et elle semble reconnue. Tu n'a plus qu'a la parametrer.
Elle a deja trouver un reseau wifi cylab, mais apparament elle n'est pas associée au point d'acces. Tu doit lui rentrer la clef wep utilisée.

sudo iwconfig ath0 enc XXXXXXXXXXXXXX (ta clef)
sudo dhclient ath0

et avec un peut de chance ca marchera

autrement ton wifi0 m'embete la, je serais toi, je ferais
sudo gedit /etc/network/interfaces
et je virerais tout ce qui ne concerne pas lo, eth0 et ath0

derniere chose, n'essaye pas d'utiliser en meme temps ta carte reseau rj45 et ta carte wifi sur le meme reseau, tu va faire planter tout le bordel

Dernière modification par DiCiCat (Le 08/12/2006, à 14:48)

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

J'ai viré tout ce qui ne concerne pas eth0, io, et ath0 des interfaces reseau.
Quand je faits sudo dhclient ath0 :

Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wifi0: unknown hardware address type 801
wifi0: unknown hardware address type 801
Listening on LPF/ath0/00:c0:a8:ab:f1:95
Sending on   LPF/ath0/00:c0:a8:ab:f1:95
Sending on   Socket/fallback
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 18
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 17
No DHCPOFFERS received.
No working leases in persistent database - sleeping.

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

redonne les resultat iwconfig et ifconfig.
Tu as bien entrer ta clef wep?
tu as redemarrer le pc apres avoir enlever le contenu de /etc/network/interfaces ou au moins redemarrer le reseau (sudo /etc/init.d/networking restart) ?

Dernière modification par DiCiCat (Le 08/12/2006, à 14:56)

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

Oui, j'ai rentré ma clep wep comme indiqué (je l'avais aussi configuré dans Administration > reseau > sans fil)

iwconfig :

lo        no wireless extensions.

eth0      no wireless extensions.

wifi0     no wireless extensions.

ath0      IEEE 802.11g  ESSID:"cylab"  Nickname:"cylab"
          Mode:Managed  Frequency:2.437 GHz  Access Point: Not-Associated   
          Bit Rate:0 kb/s   Tx-Power:16 dBm   Sensitivity=0/3 
          Retry:off   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=0/94  Signal level=-95 dBm  Noise level=-95 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

sit0      no wireless extensions.

ifconfig :

ath0      Lien encap:Ethernet  HWaddr 00:C0:A8:AB:F1:95 
          inet adr:192.168.0.3  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::2c0:a8ff:feab:f195/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)

eth0      Lien encap:Ethernet  HWaddr 00:0A:E4:B6:E8:8D 
          inet adr:192.168.0.2  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::20a:e4ff:feb6:e88d/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:565 erreurs:0 :0 overruns:0 frame:0
          TX packets:560 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:540495 (527.8 KiB) Octets transmis:94502 (92.2 KiB)
          Interruption:209 Adresse de base:0x2000

lo        Lien encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:200 (200.0 b) Octets transmis:200 (200.0 b)

wifi0     Lien encap:UNSPEC  HWaddr 00-C0-A8-AB-F1-95-00-00-00-00-00-00-00-00-00-00 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:3912 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:199
          Octets reçus:0 (0.0 b) Octets transmis:189732 (185.2 KiB)
          Interruption:177 Mémoire:f8aa0000-f8ab0000

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

tu n'a pas redemarrer le reseau avant de faire les manip, wifi0 est toujours là

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

j'hallucine!

voila mon fichier /etc/network/interfaces :

auto lo
iface lo inet loopback

iface eth0 inet dhcp

iface ath0 inet dhcp
address 192.168.0.3
netmask 255.255.255.0
gateway 192.168.0.254
wireless-essid cylab
wireless-key evanesca

et ifconfig :

ath0      Lien encap:Ethernet  HWaddr 00:C0:A8:AB:F1:95 
          adr inet6: fe80::2c0:a8ff:feab:f195/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)

eth0      Lien encap:Ethernet  HWaddr 00:0A:E4:B6:E8:8D 
          inet adr:192.168.0.2  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::20a:e4ff:feb6:e88d/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:16 erreurs:0 :0 overruns:0 frame:0
          TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:2232 (2.1 KiB) Octets transmis:2029 (1.9 KiB)
          Interruption:209 Adresse de base:0x4000

lo        Lien encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:2 erreurs:0 :0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:100 (100.0 b) Octets transmis:100 (100.0 b)

wifi0     Lien encap:UNSPEC  HWaddr 00-C0-A8-AB-F1-95-00-00-00-00-00-00-00-00-00-00 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:290 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:199
          Octets reçus:0 (0.0 b) Octets transmis:14065 (13.7 KiB)
          Interruption:177 Mémoire:f8ac0000-f8ad0000

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

y'a un probleme.
Dans ton fichier interfaces, tu demande un montage de la carte en dhcp et tu lui colle une ip fixe. C'est ou l'un ou l'autre mais pas les deux en meme temps.

Le plus simple a mon avis, tu ne garde que les deux premieres lignes de ton fichiers (celles qui concernent lo), tu vire tout le reste.
Tu installe networkmanager et gnome-network-manager, tu reboot et tu voit si nm te configure ta carte correctement

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

J'ai installé networkmanager (et 4 fichiers nécessaires) mais je n'ai pas trouvé de trace de gnome-networkmanager....
Etant un newbie, je ne sais que lancer une recherche dans le gestionnaire de paquet synaptic....

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

le nom exacte du paquet c'est network-manager-gnome pardon

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

ca y est...
Mai, euh... au fait... on la trouve où ensuite cette application?    hum... sorry...  ;-)
J'ai cherché un peu dans les applis, dans les prefs, dans administration.... rien vu de neuf!

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

non, quand tu redemarre ton pc, tu devrait trouver une petite icone pret de l'horloge. Si tu est connecté en eth0, tu voit pas grand chose, mais si tu te deconnecte tu devrais voir l'icone changer pendant qu'il initialise la carte wifi. Ensuite clique droit sur l'icone et tu doit voir la liste des cartes qu'ilreconnais et des reseaux sans fil qu'il capte, tu clique dessus et il te demande ta clef wep

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

Désolé, j'ai réalisé trop tard (après le msg) qu'il fallait rebooter...
Au redémarrage :

Il y a eu une erreur lors du démarrage du démon des préférences Gnome.

Certaines fonctionnalités, comme les thèmes, les sons ou les fonds d'écran peuvent ne pas fonctionner correctement.

Le dernier message d'erreur était :

Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

Gnome essaiera de redémarrer le démon des préférences la prochaine fois que vous vous connecterez.

Ensuite quand je deconnecte l'ethernet, l'icone affiche une croix sur fond rouge et puis... rien de plus!!
Le clic droit m'indique pourtant que le wifi et l'ethernet sont activés (cochés du moins...)

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

et mon ifconfig (!!!!??)  :

ath0      Lien encap:Ethernet  HWaddr 00:C0:A8:AB:F1:95 
          adr inet6: fe80::2c0:a8ff:feab:f195/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)

eth0      Lien encap:Ethernet  HWaddr 00:0A:E4:B6:E8:8D 
          inet adr:192.168.0.2  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::20a:e4ff:feb6:e88d/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:433 erreurs:0 :0 overruns:0 frame:0
          TX packets:437 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          Octets reçus:433638 (423.4 KiB) Octets transmis:88594 (86.5 KiB)
          Interruption:209 Adresse de base:0x6000

lo        Lien encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:2 erreurs:0 :0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          Octets reçus:100 (100.0 b) Octets transmis:100 (100.0 b)

wifi0     Lien encap:UNSPEC  HWaddr 00-C0-A8-AB-F1-95-00-00-00-00-00-00-00-00-00-00 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:513 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:199
          Octets reçus:0 (0.0 b) Octets transmis:23598 (23.0 KiB)
          Interruption:177 Mémoire:f8ac0000-f8ad0000

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

pour que networkmanager fonctionne, tu ne doit rien avaoir de configurer dans /etc/network/interfaces, nm s'occupe de tout gerer (excepté lo) a la place de ce fichier. Si une information concernant une carte apparait dans le fichier, nm n'essaiera pas de la configurer.

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

et mon fichier /etc/network/interfaces  :

auto lo
iface lo inet loopback

iface ath0 inet dhcp
wireless-essid cylab

auto ath0

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

ne laisse que les deux premieres lignes, sinon nm ne configuera pas ath0

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

c'est ce que je viens de faire...
reboot....
pareil....  :-(

pourtant même après reboot, j'ai verifié, il ne reste bien que les deux premieres lignes (io).

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

essaye de faire un
sudo killall nm-applet
sudo nm-applet

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

J'oubliais de te dire que j'ai wifi-radar d'installé...
peut-être un rapport?

DiCiCat

Re : probleme wifi (malgré de nombreuses tentatives)

desinstalle le, nm est plus efficace normallement

tridoo

Re : probleme wifi (malgré de nombreuses tentatives)

il semble bloqué sur sudo nm-applet....
Qu'est-ce que?