#1 Le 14/02/2012, à 13:53
- Pivaz
[Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Bonjour,
il est dit que ubuntu est très rapide à démarrer.
or moi il met environ 1 minute 10 à arriver au bureau.
J'ai donc chercher ce qui met du temps là dedans mais je sais pas comment régler les problèmes :
Les étapes qui prennent du temps suivi du fichier entier :
[ 5.187216] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.816034] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen29 seconcdes
[ 36.911481] ata1: EH complete
[ 44.417831] udevd[351]: starting version 1738 secondes
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic-pae (buildd@palmer) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 (Ubuntu 3.0.0-16.28-generic-pae 3.0.17)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FD 07/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF80000000 write-back
[ 0.000000] 5 base 000180000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 0001A0000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 5, base: 6GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 6656MB, range: 256MB, type WB
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f44d0] f44d0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 365f4000 - 372f2000
[ 0.000000] ACPI: RSDP 000f5e70 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT cfdf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP cfdf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT cfdf10c0 076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfdf0000 00040
[ 0.000000] ACPI: SSDT cfdf8840 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET cfdf9100 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG cfdf9140 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS cfdf9180 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: APIC cfdf8780 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6020MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfdf0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572223
[ 0.000000] free_area_init_node: node 0, pgdat c17f44c0, node_mem_map f2ff4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 12041 pages used for memmap
[ 0.000000] HighMem zone: 1331945 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s29952 r0 d23296 u262144
[ 0.000000] pcpu-alloc: s29952 r0 d23296 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1558398
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic-pae root=UUID=f49be94b-f76e-4fe1-9e0c-c188eb249358 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 28311296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:001b0000)
[ 0.000000] Memory: 6181480k/7077888k available (5525k kernel code, 107412k reserved, 2664k data, 720k init, 5375944k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1800000 - 0xc18b4000 ( 720 kB)
[ 0.000000] .data : 0xc15656fc - 0xc17ff840 (2664 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15656fc (5525 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3414.950 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6829.90 BogoMIPS (lpj=13659800)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004024] Security Framework initialized
[ 0.004035] AppArmor: AppArmor initialized
[ 0.004037] Yama: becoming mindful.
[ 0.004079] Mount-cache hash table entries: 512
[ 0.004172] Initializing cgroup subsys cpuacct
[ 0.004177] Initializing cgroup subsys memory
[ 0.004183] Initializing cgroup subsys devices
[ 0.004185] Initializing cgroup subsys freezer
[ 0.004187] Initializing cgroup subsys net_cls
[ 0.004189] Initializing cgroup subsys blkio
[ 0.004194] Initializing cgroup subsys perf_event
[ 0.004213] CPU: Physical Processor ID: 0
[ 0.004214] CPU: Processor Core ID: 0
[ 0.004217] mce: CPU supports 6 MCE banks
[ 0.004224] using AMD E400 aware idle routine
[ 0.005681] ACPI: Core revision 20110413
[ 0.012024] ftrace: allocating 25664 entries in 51 pages
[ 0.016050] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058718] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] CPU 1 irqstacks, hard=f74b8000 soft=f74ba000
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.148017] System has AMD C1E enabled
[ 0.148028] Switch to broadcast mode on CPU1
[ 0.148052] CPU 2 irqstacks, hard=f74e2000 soft=f74e4000
[ 0.148054] #2
[ 0.148055] smpboot cpu 2: start_ip = 9b000
[ 0.008000] Initializing CPU#2
[ 0.240024] Switch to broadcast mode on CPU2
[ 0.240059] CPU 3 irqstacks, hard=f74ee000 soft=f74f0000
[ 0.240061] #3
[ 0.240061] smpboot cpu 3: start_ip = 9b000
[ 0.008000] Initializing CPU#3
[ 0.332034] Brought up 4 CPUs
[ 0.332036] Total of 4 processors activated (27320.12 BogoMIPS).
[ 0.332033] Switch to broadcast mode on CPU3
[ 0.334444] Switch to broadcast mode on CPU0
[ 0.334444] devtmpfs: initialized
[ 0.334444] PM: Registering ACPI NVS region at cfdf0000 (4096 bytes)
[ 0.334444] print_constraints: dummy:
[ 0.334444] Time: 11:30:58 Date: 02/14/12
[ 0.334444] NET: Registered protocol family 16
[ 0.334444] EISA bus registered
[ 0.334444] node 0 link 0: io port [a000, ffff]
[ 0.334444] TOM: 00000000d0000000 aka 3328M
[ 0.334444] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.334444] node 0 link 0: mmio [a0000, bffff]
[ 0.334444] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.334444] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.334444] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[ 0.334444] TOM2: 00000001b0000000 aka 6912M
[ 0.334444] bus: [00, 05] on node 0 link 0
[ 0.334444] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.334444] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.334444] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.334444] bus: 00 index 3 [mem 0xe0600000-0xffffffff]
[ 0.334444] bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
[ 0.334444] bus: 00 index 5 [mem 0x1b0000000-0xfcffffffff]
[ 0.334444] Extended Config Space enabled on 1 nodes
[ 0.334444] ACPI: bus type pci registered
[ 0.334444] Trying to unpack rootfs image as initramfs...
[ 0.334444] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.334444] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.334444] PCI: Using MMCONFIG for extended config space
[ 0.334444] PCI: Using configuration type 1 for base access
[ 0.336508] bio: create slab <bio-0> at 0
[ 0.336590] ACPI: EC: Look up EC in DSDT
[ 0.340177] ACPI: Interpreter enabled
[ 0.340183] ACPI: (supports S0 S3 S4 S5)
[ 0.340196] ACPI: Using IOAPIC for interrupt routing
[ 0.509549] ACPI: No dock devices found.
[ 0.509552] HEST: Table not found.
[ 0.509555] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.509595] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.509669] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.509671] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.509673] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.509675] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.509677] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.509689] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.509699] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.509726] pci 0000:00:03.0: [1022:960b] type 1 class 0x000604
[ 0.509748] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.509750] pci 0000:00:03.0: PME# disabled
[ 0.509762] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.509782] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.509784] pci 0000:00:05.0: PME# disabled
[ 0.509798] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.509818] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.509820] pci 0000:00:0a.0: PME# disabled
[ 0.509841] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.509857] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.509864] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.509871] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.509878] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.509885] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.509892] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.509906] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.509938] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.509948] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.509998] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.510012] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 0.510061] pci 0000:00:12.2: supports D1 D2
[ 0.510063] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.510065] pci 0000:00:12.2: PME# disabled
[ 0.510080] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.510090] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.510139] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.510153] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 0.510202] pci 0000:00:13.2: supports D1 D2
[ 0.510203] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.510206] pci 0000:00:13.2: PME# disabled
[ 0.510220] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.510271] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.510280] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.510287] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.510294] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.510301] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.510308] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.510333] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.510349] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.510389] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.510392] pci 0000:00:14.2: PME# disabled
[ 0.510402] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.510455] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.510483] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.510493] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.510541] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.510580] pci 0000:00:15.0: supports D1 D2
[ 0.510600] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.510610] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 0.510659] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.510672] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 0.510722] pci 0000:00:16.2: supports D1 D2
[ 0.510723] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.510726] pci 0000:00:16.2: PME# disabled
[ 0.510739] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.510750] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.510760] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.510770] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.510781] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.510823] pci 0000:01:00.0: [10de:0dc4] type 0 class 0x000300
[ 0.510832] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.510843] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.510853] pci 0000:01:00.0: reg 1c: [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.510860] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.510867] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.510909] pci 0000:01:00.1: [10de:0be9] type 0 class 0x000403
[ 0.510919] pci 0000:01:00.1: reg 10: [mem 0xfbffc000-0xfbffffff]
[ 0.516051] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.516055] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.516058] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.516061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.516094] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.516109] pci 0000:02:00.0: reg 10: [mem 0xfd8fe000-0xfd8fffff 64bit]
[ 0.516163] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.516166] pci 0000:02:00.0: PME# disabled
[ 0.524049] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.524053] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.524056] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.524059] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.524092] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.524104] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 0.524123] pci 0000:03:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
[ 0.524135] pci 0000:03:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
[ 0.524144] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.524171] pci 0000:03:00.0: supports D1 D2
[ 0.524172] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.524176] pci 0000:03:00.0: PME# disabled
[ 0.521428] Freeing initrd memory: 13304k freed
[ 0.532057] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.532061] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.532063] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.532066] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.532106] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.532125] pci 0000:04:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
[ 0.532135] pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
[ 0.532200] pci 0000:04:0e.0: supports D1 D2
[ 0.532202] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.532206] pci 0000:04:0e.0: PME# disabled
[ 0.532233] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.532236] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.532239] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.532242] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.532244] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.532246] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.532247] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.532249] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.532251] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.532302] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
[ 0.532382] pci 0000:05:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 0.532421] pci 0000:05:00.0: PME# supported from D3hot
[ 0.532425] pci 0000:05:00.0: PME# disabled
[ 0.532451] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 0.532473] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 0.532485] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 0.532497] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 0.532509] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 0.532521] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 0.532584] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.532595] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.532599] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.532601] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.532606] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.532618] pci_bus 0000:00: on NUMA node 0
[ 0.532622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.532826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.532854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.532897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
[ 0.532917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.532940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.532962] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.532964] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.532966] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.540070] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540096] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540143] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540166] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540188] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540211] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540234] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.540309] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.540312] vgaarb: loaded
[ 0.540313] vgaarb: bridge control possible 0000:01:00.0
[ 0.540433] SCSI subsystem initialized
[ 0.540445] libata version 3.00 loaded.
[ 0.540445] usbcore: registered new interface driver usbfs
[ 0.540445] usbcore: registered new interface driver hub
[ 0.540445] usbcore: registered new device driver usb
[ 0.540445] PCI: Using ACPI for IRQ routing
[ 0.546688] PCI: pci_cache_line_size set to 64 bytes
[ 0.546694] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.546762] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.546764] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff
[ 0.546824] NetLabel: Initializing
[ 0.546825] NetLabel: domain hash size = 128
[ 0.546826] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.546833] NetLabel: unlabeled traffic allowed by default
[ 0.546856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.546859] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.548057] Switching to clocksource hpet
[ 0.551166] Switched to NOHz mode on CPU #3
[ 0.551169] Switched to NOHz mode on CPU #0
[ 0.551173] Switched to NOHz mode on CPU #2
[ 0.551177] Switched to NOHz mode on CPU #1
[ 0.551825] AppArmor: AppArmor Filesystem Enabled
[ 0.551838] pnp: PnP ACPI init
[ 0.551847] ACPI: bus type pnp registered
[ 0.551899] pnp 00:00: [bus 00-ff]
[ 0.551901] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.551903] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.551904] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.551906] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.551907] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.551909] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.551936] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.551944] pnp 00:01: [io 0x0010-0x001f]
[ 0.551945] pnp 00:01: [io 0x0022-0x003f]
[ 0.551946] pnp 00:01: [io 0x0044-0x005f]
[ 0.551947] pnp 00:01: [io 0x0062-0x0063]
[ 0.551949] pnp 00:01: [io 0x0065-0x006f]
[ 0.551950] pnp 00:01: [io 0x0074-0x007f]
[ 0.551951] pnp 00:01: [io 0x0091-0x0093]
[ 0.551952] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.551953] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.551955] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.551956] pnp 00:01: [io 0x0220-0x0225]
[ 0.551957] pnp 00:01: [io 0x0290-0x0294]
[ 0.551991] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.551993] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.551995] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.551997] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.552294] pnp 00:02: [io 0x4100-0x411f]
[ 0.552295] pnp 00:02: [io 0x0228-0x022f]
[ 0.552296] pnp 00:02: [io 0x040b]
[ 0.552297] pnp 00:02: [io 0x04d6]
[ 0.552298] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.552300] pnp 00:02: [io 0x0c14]
[ 0.552301] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.552302] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.552303] pnp 00:02: [io 0x0c6f]
[ 0.552304] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.552305] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.552307] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.552308] pnp 00:02: [io 0x4000-0x40fe]
[ 0.552309] pnp 00:02: [io 0x4210-0x4217]
[ 0.552310] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.552311] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.552312] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.552314] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.552315] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.552319] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.552339] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.552343] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.552365] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.552367] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.552368] system 00:02: [io 0x040b] has been reserved
[ 0.552370] system 00:02: [io 0x04d6] has been reserved
[ 0.552371] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.552373] system 00:02: [io 0x0c14] has been reserved
[ 0.552375] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.552376] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.552378] system 00:02: [io 0x0c6f] has been reserved
[ 0.552379] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.552381] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.552385] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.552386] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.552388] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.552390] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.552392] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.552393] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.552395] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.552397] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.552456] pnp 00:03: [dma 4]
[ 0.552457] pnp 00:03: [io 0x0000-0x000f]
[ 0.552459] pnp 00:03: [io 0x0080-0x0090]
[ 0.552460] pnp 00:03: [io 0x0094-0x009f]
[ 0.552461] pnp 00:03: [io 0x00c0-0x00df]
[ 0.552480] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.552506] pnp 00:04: [io 0x0070-0x0073]
[ 0.552516] pnp 00:04: [irq 8]
[ 0.552533] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.552538] pnp 00:05: [io 0x0061]
[ 0.552555] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.552560] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.552565] pnp 00:06: [irq 13]
[ 0.552582] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.552672] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.552673] pnp 00:07: [io 0x03f7]
[ 0.552678] pnp 00:07: [irq 6]
[ 0.552679] pnp 00:07: [dma 2]
[ 0.552707] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.552812] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.552817] pnp 00:08: [irq 4]
[ 0.552853] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.552885] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.552919] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.552921] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.553016] pnp 00:0a: [mem 0x000cd800-0x000cffff]
[ 0.553018] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.553019] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.553020] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.553022] pnp 00:0a: [mem 0xcfdf0000-0xcfdfffff]
[ 0.553023] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.553024] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.553026] pnp 00:0a: [mem 0x00100000-0xcfdeffff]
[ 0.553027] pnp 00:0a: [mem 0xcfe00000-0xcfefffff]
[ 0.553028] pnp 00:0a: [mem 0xcff00000-0xcfffffff]
[ 0.553030] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.553031] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.553033] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.553034] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[ 0.553037] pnp 00:0a: disabling [mem 0x000cd800-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.553039] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.553042] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.553044] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.553047] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.553049] pnp 00:0a: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.553074] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
[ 0.553097] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 0.553099] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.553101] system 00:0a: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 0.553103] system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 0.553105] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.553107] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.553109] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.553111] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.553123] pnp: PnP ACPI: found 11 devices
[ 0.553124] ACPI: ACPI bus type pnp unregistered
[ 0.553126] PnPBIOS: Disabled by ACPI PNP
[ 0.588487] PCI: max bus depth: 1 pci_try_num: 2
[ 0.588507] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
[ 0.588509] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.588511] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.588513] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.588516] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.588519] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.588520] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.588523] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.588525] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.588529] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.588530] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.588532] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.588534] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.588536] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.588539] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.588541] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.588545] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.588548] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.588553] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.588555] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.588558] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.588561] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.588575] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.588577] pci 0000:00:03.0: setting latency timer to 64
[ 0.588586] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.588588] pci 0000:00:05.0: setting latency timer to 64
[ 0.588596] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.588598] pci 0000:00:0a.0: setting latency timer to 64
[ 0.588604] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.588607] pci 0000:00:15.0: setting latency timer to 64
[ 0.588610] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.588611] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.588613] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.588614] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.588616] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.588618] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.588619] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.588621] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.588622] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.588624] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.588626] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.588627] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.588629] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.588630] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.588632] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.588633] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.588635] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.588637] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.588638] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.588640] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.588641] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.588643] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.588644] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.588646] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.588647] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.588669] NET: Registered protocol family 2
[ 0.588712] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.588845] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.589168] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.589330] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.589332] TCP reno registered
[ 0.589334] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.589340] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.589401] NET: Registered protocol family 1
[ 0.876173] pci 0000:01:00.0: Boot video device
[ 0.876204] PCI: CLS 4 bytes, default 64
[ 0.876515] audit: initializing netlink socket (disabled)
[ 0.876522] type=2000 audit(1329219057.876:1): initialized
[ 0.898559] highmem bounce pool size: 64 pages
[ 0.898563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.915791] VFS: Disk quotas dquot_6.5.2
[ 0.915838] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.916291] fuse init (API version 7.16)
[ 0.916346] msgmni has been set to 1599
[ 0.916755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.916789] io scheduler noop registered
[ 0.916790] io scheduler deadline registered
[ 0.916800] io scheduler cfq registered (default)
[ 0.916880] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.916903] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
[ 0.916931] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.916949] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.916975] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.916992] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 0.917060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.917074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.917153] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.917157] ACPI: Power Button [PWRB]
[ 0.917187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.917189] ACPI: Power Button [PWRF]
[ 0.917204] ACPI: acpi_idle registered with cpuidle
[ 0.917220] ACPI: processor limited to max C-state 1
[ 1.116535] ERST: Table is not found!
[ 1.116582] isapnp: Scanning for PnP cards...
[ 1.116608] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.136952] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.469873] isapnp: No Plug & Play device found
[ 1.493351] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.493509] Linux agpgart interface v0.103
[ 1.494375] brd: module loaded
[ 1.494708] loop: module loaded
[ 1.494820] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.494850] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
[ 1.494854] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.494868] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 1.494876] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 1.495055] Fixed MDIO Bus: probed
[ 1.495069] PPP generic driver version 2.4.2
[ 1.495090] tun: Universal TUN/TAP device driver, 1.6
[ 1.495091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.495136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.495144] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.495154] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.495173] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.495180] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.495190] QUIRK: Enable AMD PLL fix
[ 1.495198] ehci_hcd 0000:00:12.2: debug port 1
[ 1.495219] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 1.504075] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.504154] hub 1-0:1.0: USB hub found
[ 1.504157] hub 1-0:1.0: 5 ports detected
[ 1.504203] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.504211] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.504231] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.504236] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.504250] ehci_hcd 0000:00:13.2: debug port 1
[ 1.504259] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 1.516074] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.516148] hub 2-0:1.0: USB hub found
[ 1.516150] hub 2-0:1.0: 5 ports detected
[ 1.516196] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.516204] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.516223] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.516229] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.516243] ehci_hcd 0000:00:16.2: debug port 1
[ 1.516252] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 1.528074] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.528146] hub 3-0:1.0: USB hub found
[ 1.528148] hub 3-0:1.0: 4 ports detected
[ 1.528191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.528200] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.528208] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.528233] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.528255] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 1.588177] hub 4-0:1.0: USB hub found
[ 1.588182] hub 4-0:1.0: 5 ports detected
[ 1.588226] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.588236] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.588255] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.588267] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 1.648121] hub 5-0:1.0: USB hub found
[ 1.648125] hub 5-0:1.0: 5 ports detected
[ 1.648171] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.648179] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.648198] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.648210] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 1.708132] hub 6-0:1.0: USB hub found
[ 1.708137] hub 6-0:1.0: 2 ports detected
[ 1.708177] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.708185] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.708211] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.708223] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 1.768120] hub 7-0:1.0: USB hub found
[ 1.768125] hub 7-0:1.0: 4 ports detected
[ 1.768172] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.768213] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.801314] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.801315] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.876077] Refined TSC clocksource calibration: 3415.055 MHz.
[ 1.876080] Switching to clocksource tsc
[ 2.024066] usb 4-5: new low speed USB device number 2 using ohci_hcd
[ 2.052145] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.052193] mousedev: PS/2 mouse device common for all mice
[ 2.052251] rtc_cmos 00:04: RTC can wake from S4
[ 2.052309] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.052332] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.052381] device-mapper: uevent: version 1.0.3
[ 2.052425] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.052444] EISA: Probing bus 0 at eisa.0
[ 2.052446] EISA: Cannot allocate resource for mainboard
[ 2.052447] Cannot allocate resource for EISA slot 1
[ 2.052448] Cannot allocate resource for EISA slot 2
[ 2.052449] Cannot allocate resource for EISA slot 3
[ 2.052450] Cannot allocate resource for EISA slot 4
[ 2.052451] Cannot allocate resource for EISA slot 5
[ 2.052453] Cannot allocate resource for EISA slot 6
[ 2.052454] Cannot allocate resource for EISA slot 7
[ 2.052455] Cannot allocate resource for EISA slot 8
[ 2.052456] EISA: Detected 0 cards.
[ 2.052461] cpufreq-nforce2: No nForce2 chipset.
[ 2.052463] cpuidle: using governor ladder
[ 2.052465] cpuidle: using governor menu
[ 2.052466] EFI Variables Facility v0.08 2004-May-17
[ 2.052626] TCP cubic registered
[ 2.052711] NET: Registered protocol family 10
[ 2.053057] NET: Registered protocol family 17
[ 2.053065] Registering the dns_resolver key type
[ 2.053077] Using IPI No-Shortcut mode
[ 2.053118] PM: Hibernation image not present or could not be loaded.
[ 2.053123] registered taskstats version 1
[ 2.065545] Magic number: 0:669:529
[ 2.065614] rtc_cmos 00:04: setting system clock to 2012-02-14 11:30:59 UTC (1329219059)
[ 2.065622] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
[ 2.065647] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 2.065648] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 2.065649] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 2.065650] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.065844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.065846] EDD information not available.
[ 2.065943] Freeing unused kernel memory: 720k freed
[ 2.066108] Write protecting the kernel text: 5528k
[ 2.066153] Write protecting the kernel read-only data: 2240k
[ 2.066154] NX-protecting the kernel data: 4712k
[ 2.076305] udevd[87]: starting version 173
[ 2.086504] ahci 0000:00:11.0: version 3.0
[ 2.086516] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.086557] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 2.086625] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.086628] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.088477] scsi0 : ahci
[ 2.089437] scsi1 : ahci
[ 2.089512] scsi2 : ahci
[ 2.089561] scsi3 : ahci
[ 2.089750] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 43
[ 2.089753] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 43
[ 2.089755] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 43
[ 2.089758] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 43
[ 2.089791] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.094608] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.094623] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.094652] r8169 0000:03:00.0: setting latency timer to 64
[ 2.094929] scsi4 : pata_atiixp
[ 2.096721] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.097030] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf8428000, 1c:6f:65:90:29:f9, XID 083000c0 IRQ 44
[ 2.098696] scsi5 : pata_atiixp
[ 2.098827] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.098843] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.098845] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.098897] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.099009] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd8fe000
[ 2.099044] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.099049] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.099053] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.099057] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.099061] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 2.099100] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.099102] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.099187] xHCI xhci_add_endpoint called for root hub
[ 2.099189] xHCI xhci_check_bandwidth called for root hub
[ 2.099207] hub 8-0:1.0: USB hub found
[ 2.099212] hub 8-0:1.0: 2 ports detected
[ 2.099271] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.099293] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.102844] xHCI xhci_add_endpoint called for root hub
[ 2.102845] xHCI xhci_check_bandwidth called for root hub
[ 2.102861] hub 9-0:1.0: USB hub found
[ 2.102869] hub 9-0:1.0: 2 ports detected
[ 2.104117] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.104121] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.104127] ahci 0000:05:00.0: setting latency timer to 64
[ 2.104539] scsi6 : ahci
[ 2.105651] scsi7 : ahci
[ 2.105699] ata7: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 17
[ 2.105702] ata8: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 17
[ 2.105746] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.105773] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 2.106625] scsi8 : pata_jmicron
[ 2.106681] scsi9 : pata_jmicron
[ 2.106703] ata9: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
[ 2.106705] ata10: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[ 2.225323] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
[ 2.225372] generic-usb 0003:046E:55A5.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-5/input0
[ 2.239229] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3
[ 2.239302] generic-usb 0003:046E:55A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-5/input1
[ 2.239313] usbcore: registered new interface driver usbhid
[ 2.239314] usbhid: USB HID core driver
[ 2.412095] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.420032] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.428083] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.428122] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.532058] usb 5-1: new low speed USB device number 2 using ohci_hcd
[ 2.580072] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.581538] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB06, max MWDMA2
[ 2.584071] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.585176] ata2.00: ATA-8: ST3500413AS, JC45, max UDMA/133
[ 2.585179] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.586529] ata2.00: configured for UDMA/133
[ 2.709241] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4
[ 2.709303] generic-usb 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:13.0-1/input0
[ 3.382527] ata1.00: configured for PIO4
[ 4.184456] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB06 PQ: 0 ANSI: 5
[ 4.187661] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.187663] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.187747] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.187789] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.187944] scsi 1:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5
[ 4.188040] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.188052] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.188161] sd 1:0:0:0: [sda] Write Protect is off
[ 4.188164] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.188187] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.229667] sda: sda1 sda2 < sda5 >
[ 4.229906] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.356953] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.412104] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 4.912115] firewire_core: created device fw0: GUID 003acdd9001c6f65, S400
[ 5.187216] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.816034] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 34.816037] ata1.00: failed command: IDENTIFY PACKET DEVICE
[ 34.816041] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 34.816042] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 34.816044] ata1.00: status: { DRDY }
[ 34.816047] ata1: hard resetting link
[ 35.308050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 36.110662] ata1.00: configured for PIO4
[ 36.911481] ata1: EH complete
[ 44.417831] udevd[351]: starting version 173
[ 44.502352] Adding 9823228k swap on /dev/sda5. Priority:-1 extents:1 across:9823228k
[ 44.503393] type=1400 audit(1329219101.932:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=398 comm="apparmor_parser"
[ 44.503466] type=1400 audit(1329219101.932:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
[ 44.503656] type=1400 audit(1329219101.932:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=398 comm="apparmor_parser"
[ 44.503735] type=1400 audit(1329219101.932:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
[ 44.503825] type=1400 audit(1329219101.932:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=398 comm="apparmor_parser"
[ 44.503891] type=1400 audit(1329219101.932:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
[ 44.522400] lp: driver loaded but no devices found
[ 44.525120] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 44.526685] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 44.526744] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 44.536899] nvidia: module license 'NVIDIA' taints kernel.
[ 44.536902] Disabling lock debugging due to kernel taint
[ 44.553608] wmi: Mapper loaded
[ 44.565958] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 44.610102] hda_codec: ALC892: BIOS auto-probing.
[ 44.619273] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 44.619360] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 44.619363] hda_intel: Disabling MSI
[ 44.619384] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 44.860380] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 45.011752] type=1400 audit(1329219102.440:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=861 comm="apparmor_parser"
[ 45.011768] type=1400 audit(1329219102.440:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=860 comm="apparmor_parser"
[ 45.012071] type=1400 audit(1329219102.444:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser"
[ 45.012225] type=1400 audit(1329219102.444:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser"
[ 45.078077] r8169 0000:03:00.0: eth0: link down
[ 45.078085] r8169 0000:03:00.0: eth0: link down
[ 45.078355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.082778] init: failsafe main process (803) killed by TERM signal
[ 45.083715] init: apport pre-start process (904) terminated with status 1
[ 45.085413] init: apport post-stop process (919) terminated with status 1merci d'avance à vous
ps : j'utilise ubuntu 11.10, et jviens de l'installer sans problème, le démarrage est juste lent, j'ai déjà fais les mises à jour ça à rien changer.j'ai ça aussi : http://paste.ubuntu.com/841607/
Dernière modification par Pivaz (Le 14/02/2012, à 19:27)
Hors ligne
#2 Le 14/02/2012, à 14:47
- linoll
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Il te faut au moins savoir que si tu as installé un pilote non-libre pour carte graphique (nVidia ou ATI/AMD) le temps de boot est nettement plus long qu'avec un pilote libre géré par le noyau Linux...
Et sinon il faudrait aussi savoir si ton ami plus rapide au boot n'aurait pas un SSD ou un disque dur hybride ou encore un controleur RAID de plusieurs disques durs...
Hors ligne
#3 Le 14/02/2012, à 16:56
- malbo
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
On parle de ton cas ici (avec cette partie qu'on retrouve dans ton dmesg : "failed command: IDENTIFY PACKET DEVICE") : https://bugs.launchpad.net/ubuntu/+sour … bug/892768
Et dans ce rapport de bug, il y a un lien vers cette solution : http://paulphilippov.com/articles/how_t … ata_errors
dans laquelle il est question d'un graveur de DVD SH-S223C et il se trouve que c'est la référence de ton graveur (elle est mentionnée dans ton dmesg)
Hors ligne
#4 Le 14/02/2012, à 19:26
- Pivaz
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Incroyable, franchement, je suis trop surpris de votre rapidité, et surtout efficacité car j'avais chercher pourtant mais pas dans les bons endroit.
J'ai appliqué à l'aveugle ces deux lignes mentionnées dans le lien que tu m'as donné malbo : http://paulphilippov.com/articles/how_t … ata_errors
sudo sed -i '/ATAPI/,+1s/^/#/' /lib/udev/rules.d/60-persistent-storage.rules
sudo update-initramfs -uet mon fichier dsmeg fais désormais 12 secondes :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic-pae (buildd@palmer) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 (Ubuntu 3.0.0-16.28-generic-pae 3.0.17)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FD 07/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF80000000 write-back
[ 0.000000] 5 base 000180000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 0001A0000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 5, base: 6GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 6656MB, range: 256MB, type WB
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f44d0] f44d0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 365f2000 - 372f1000
[ 0.000000] ACPI: RSDP 000f5e70 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT cfdf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP cfdf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT cfdf10c0 076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfdf0000 00040
[ 0.000000] ACPI: SSDT cfdf8840 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET cfdf9100 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG cfdf9140 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS cfdf9180 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: APIC cfdf8780 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6020MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfdf0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572223
[ 0.000000] free_area_init_node: node 0, pgdat c17f44c0, node_mem_map f2ff2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 12041 pages used for memmap
[ 0.000000] HighMem zone: 1331945 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s29952 r0 d23296 u262144
[ 0.000000] pcpu-alloc: s29952 r0 d23296 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1558398
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic-pae root=UUID=47844307-346e-4528-a868-42c098a3e3da ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 28311296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:001b0000)
[ 0.000000] Memory: 6181476k/7077888k available (5525k kernel code, 107416k reserved, 2664k data, 720k init, 5375944k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1800000 - 0xc18b4000 ( 720 kB)
[ 0.000000] .data : 0xc15656fc - 0xc17ff840 (2664 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15656fc (5525 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3414.784 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6829.56 BogoMIPS (lpj=13659136)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004024] Security Framework initialized
[ 0.004036] AppArmor: AppArmor initialized
[ 0.004037] Yama: becoming mindful.
[ 0.004080] Mount-cache hash table entries: 512
[ 0.004173] Initializing cgroup subsys cpuacct
[ 0.004178] Initializing cgroup subsys memory
[ 0.004184] Initializing cgroup subsys devices
[ 0.004186] Initializing cgroup subsys freezer
[ 0.004188] Initializing cgroup subsys net_cls
[ 0.004189] Initializing cgroup subsys blkio
[ 0.004195] Initializing cgroup subsys perf_event
[ 0.004213] CPU: Physical Processor ID: 0
[ 0.004215] CPU: Processor Core ID: 0
[ 0.004217] mce: CPU supports 6 MCE banks
[ 0.004224] using AMD E400 aware idle routine
[ 0.005681] ACPI: Core revision 20110413
[ 0.012025] ftrace: allocating 25664 entries in 51 pages
[ 0.016049] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058750] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] CPU 1 irqstacks, hard=f74b8000 soft=f74ba000
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.148017] System has AMD C1E enabled
[ 0.148028] Switch to broadcast mode on CPU1
[ 0.148052] CPU 2 irqstacks, hard=f74e2000 soft=f74e4000
[ 0.148053] #2
[ 0.148054] smpboot cpu 2: start_ip = 9b000
[ 0.008000] Initializing CPU#2
[ 0.240025] Switch to broadcast mode on CPU2
[ 0.240060] CPU 3 irqstacks, hard=f74ee000 soft=f74f0000
[ 0.240061] #3
[ 0.240062] smpboot cpu 3: start_ip = 9b000
[ 0.008000] Initializing CPU#3
[ 0.332033] Brought up 4 CPUs
[ 0.332035] Total of 4 processors activated (27319.77 BogoMIPS).
[ 0.332032] Switch to broadcast mode on CPU3
[ 0.334429] Switch to broadcast mode on CPU0
[ 0.334429] devtmpfs: initialized
[ 0.334429] PM: Registering ACPI NVS region at cfdf0000 (4096 bytes)
[ 0.334429] print_constraints: dummy:
[ 0.334429] Time: 17:16:12 Date: 02/14/12
[ 0.334429] NET: Registered protocol family 16
[ 0.334429] EISA bus registered
[ 0.334429] node 0 link 0: io port [a000, ffff]
[ 0.334429] TOM: 00000000d0000000 aka 3328M
[ 0.334429] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.334429] node 0 link 0: mmio [a0000, bffff]
[ 0.334429] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.334429] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.334429] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[ 0.334429] TOM2: 00000001b0000000 aka 6912M
[ 0.334429] bus: [00, 05] on node 0 link 0
[ 0.334429] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.334429] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.334429] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.334429] bus: 00 index 3 [mem 0xe0600000-0xffffffff]
[ 0.334429] bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
[ 0.334429] bus: 00 index 5 [mem 0x1b0000000-0xfcffffffff]
[ 0.334429] Extended Config Space enabled on 1 nodes
[ 0.334429] ACPI: bus type pci registered
[ 0.334429] Trying to unpack rootfs image as initramfs...
[ 0.334429] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.334429] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.334429] PCI: Using MMCONFIG for extended config space
[ 0.334429] PCI: Using configuration type 1 for base access
[ 0.336451] bio: create slab <bio-0> at 0
[ 0.336590] ACPI: EC: Look up EC in DSDT
[ 0.340177] ACPI: Interpreter enabled
[ 0.340182] ACPI: (supports S0 S3 S4 S5)
[ 0.340195] ACPI: Using IOAPIC for interrupt routing
[ 0.505539] ACPI: No dock devices found.
[ 0.505541] HEST: Table not found.
[ 0.505544] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.505584] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.505658] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.505660] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.505662] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.505664] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.505666] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.505678] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.505688] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.505716] pci 0000:00:03.0: [1022:960b] type 1 class 0x000604
[ 0.505738] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.505740] pci 0000:00:03.0: PME# disabled
[ 0.505751] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.505772] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.505774] pci 0000:00:05.0: PME# disabled
[ 0.505787] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.505808] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.505810] pci 0000:00:0a.0: PME# disabled
[ 0.505831] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.505846] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.505853] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.505860] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.505867] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.505874] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.505881] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.505896] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.505928] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.505938] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.505987] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.506001] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 0.506051] pci 0000:00:12.2: supports D1 D2
[ 0.506052] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.506055] pci 0000:00:12.2: PME# disabled
[ 0.506070] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.506079] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.506128] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.506142] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 0.506192] pci 0000:00:13.2: supports D1 D2
[ 0.506193] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.506196] pci 0000:00:13.2: PME# disabled
[ 0.506210] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.506261] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.506270] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.506277] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.506284] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.506291] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.506298] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.506324] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.506339] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.506380] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.506383] pci 0000:00:14.2: PME# disabled
[ 0.506393] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.506446] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.506474] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.506483] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.506532] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.506571] pci 0000:00:15.0: supports D1 D2
[ 0.506590] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.506600] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 0.506649] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.506663] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 0.506712] pci 0000:00:16.2: supports D1 D2
[ 0.506714] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.506716] pci 0000:00:16.2: PME# disabled
[ 0.506730] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.506741] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.506751] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.506761] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.506772] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.506813] pci 0000:01:00.0: [10de:0dc4] type 0 class 0x000300
[ 0.506823] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.506833] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.506844] pci 0000:01:00.0: reg 1c: [mem 0xdc000000-0xdfffffff 64bit pref]
[ 0.506851] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.506858] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.506901] pci 0000:01:00.1: [10de:0be9] type 0 class 0x000403
[ 0.506910] pci 0000:01:00.1: reg 10: [mem 0xfbffc000-0xfbffffff]
[ 0.512050] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.512054] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.512057] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.512060] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.512093] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.512108] pci 0000:02:00.0: reg 10: [mem 0xfd8fe000-0xfd8fffff 64bit]
[ 0.512163] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.512166] pci 0000:02:00.0: PME# disabled
[ 0.520048] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.520053] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.520055] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.520058] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.520090] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.520103] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 0.520121] pci 0000:03:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
[ 0.520133] pci 0000:03:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
[ 0.520142] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.520169] pci 0000:03:00.0: supports D1 D2
[ 0.520171] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.520174] pci 0000:03:00.0: PME# disabled
[ 0.521491] Freeing initrd memory: 13308k freed
[ 0.528065] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.528071] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.528073] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.528076] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.528120] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.528140] pci 0000:04:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
[ 0.528150] pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
[ 0.528218] pci 0000:04:0e.0: supports D1 D2
[ 0.528219] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.528224] pci 0000:04:0e.0: PME# disabled
[ 0.528252] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.528255] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.528258] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.528261] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.528263] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.528265] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.528267] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.528269] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.528270] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.528325] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
[ 0.528407] pci 0000:05:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 0.528447] pci 0000:05:00.0: PME# supported from D3hot
[ 0.528451] pci 0000:05:00.0: PME# disabled
[ 0.528478] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 0.528499] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 0.528512] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 0.528524] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 0.528536] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 0.528548] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 0.528611] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.528623] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.528626] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.528629] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.528633] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.528646] pci_bus 0000:00: on NUMA node 0
[ 0.528650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.528855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.528883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.528926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
[ 0.528947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.528971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.528998] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.529001] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.529002] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.536071] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536097] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536121] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536144] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536166] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536212] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536235] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.536309] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.536313] vgaarb: loaded
[ 0.536313] vgaarb: bridge control possible 0000:01:00.0
[ 0.536434] SCSI subsystem initialized
[ 0.536445] libata version 3.00 loaded.
[ 0.536445] usbcore: registered new interface driver usbfs
[ 0.536445] usbcore: registered new interface driver hub
[ 0.536445] usbcore: registered new device driver usb
[ 0.536445] PCI: Using ACPI for IRQ routing
[ 0.542703] PCI: pci_cache_line_size set to 64 bytes
[ 0.542710] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.542778] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.542780] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff
[ 0.542839] NetLabel: Initializing
[ 0.542840] NetLabel: domain hash size = 128
[ 0.542841] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.542848] NetLabel: unlabeled traffic allowed by default
[ 0.542872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.542874] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.544057] Switching to clocksource hpet
[ 0.547149] Switched to NOHz mode on CPU #3
[ 0.547151] Switched to NOHz mode on CPU #0
[ 0.547155] Switched to NOHz mode on CPU #2
[ 0.547159] Switched to NOHz mode on CPU #1
[ 0.547814] AppArmor: AppArmor Filesystem Enabled
[ 0.547827] pnp: PnP ACPI init
[ 0.547836] ACPI: bus type pnp registered
[ 0.547888] pnp 00:00: [bus 00-ff]
[ 0.547890] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.547891] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.547893] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.547894] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.547896] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.547897] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.547925] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.547932] pnp 00:01: [io 0x0010-0x001f]
[ 0.547933] pnp 00:01: [io 0x0022-0x003f]
[ 0.547934] pnp 00:01: [io 0x0044-0x005f]
[ 0.547935] pnp 00:01: [io 0x0062-0x0063]
[ 0.547937] pnp 00:01: [io 0x0065-0x006f]
[ 0.547938] pnp 00:01: [io 0x0074-0x007f]
[ 0.547939] pnp 00:01: [io 0x0091-0x0093]
[ 0.547940] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.547941] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.547943] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.547944] pnp 00:01: [io 0x0220-0x0225]
[ 0.547945] pnp 00:01: [io 0x0290-0x0294]
[ 0.547979] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.547981] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.547983] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.547985] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.548286] pnp 00:02: [io 0x4100-0x411f]
[ 0.548288] pnp 00:02: [io 0x0228-0x022f]
[ 0.548289] pnp 00:02: [io 0x040b]
[ 0.548290] pnp 00:02: [io 0x04d6]
[ 0.548291] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.548292] pnp 00:02: [io 0x0c14]
[ 0.548293] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.548295] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.548296] pnp 00:02: [io 0x0c6f]
[ 0.548297] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.548298] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.548299] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.548300] pnp 00:02: [io 0x4000-0x40fe]
[ 0.548302] pnp 00:02: [io 0x4210-0x4217]
[ 0.548303] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.548304] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.548305] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.548307] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.548308] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.548312] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.548331] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.548336] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.548358] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.548360] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.548361] system 00:02: [io 0x040b] has been reserved
[ 0.548363] system 00:02: [io 0x04d6] has been reserved
[ 0.548364] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.548366] system 00:02: [io 0x0c14] has been reserved
[ 0.548368] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.548369] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.548371] system 00:02: [io 0x0c6f] has been reserved
[ 0.548372] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.548374] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.548378] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.548379] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.548381] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.548383] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.548384] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.548386] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.548388] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.548390] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.548449] pnp 00:03: [dma 4]
[ 0.548450] pnp 00:03: [io 0x0000-0x000f]
[ 0.548452] pnp 00:03: [io 0x0080-0x0090]
[ 0.548453] pnp 00:03: [io 0x0094-0x009f]
[ 0.548454] pnp 00:03: [io 0x00c0-0x00df]
[ 0.548473] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.548500] pnp 00:04: [io 0x0070-0x0073]
[ 0.548509] pnp 00:04: [irq 8]
[ 0.548527] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.548532] pnp 00:05: [io 0x0061]
[ 0.548549] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.548554] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.548559] pnp 00:06: [irq 13]
[ 0.548576] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.548666] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.548667] pnp 00:07: [io 0x03f7]
[ 0.548672] pnp 00:07: [irq 6]
[ 0.548673] pnp 00:07: [dma 2]
[ 0.548701] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.548806] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.548812] pnp 00:08: [irq 4]
[ 0.548847] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.548879] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.548913] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.548915] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.549010] pnp 00:0a: [mem 0x000cd800-0x000cffff]
[ 0.549012] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.549013] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.549015] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.549016] pnp 00:0a: [mem 0xcfdf0000-0xcfdfffff]
[ 0.549017] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.549019] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.549020] pnp 00:0a: [mem 0x00100000-0xcfdeffff]
[ 0.549021] pnp 00:0a: [mem 0xcfe00000-0xcfefffff]
[ 0.549023] pnp 00:0a: [mem 0xcff00000-0xcfffffff]
[ 0.549024] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.549026] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.549027] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.549028] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[ 0.549031] pnp 00:0a: disabling [mem 0x000cd800-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.549034] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.549036] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.549038] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.549041] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.549043] pnp 00:0a: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.549068] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
[ 0.549091] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 0.549093] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.549095] system 00:0a: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 0.549097] system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 0.549099] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.549101] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.549103] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.549105] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.549116] pnp: PnP ACPI: found 11 devices
[ 0.549117] ACPI: ACPI bus type pnp unregistered
[ 0.549120] PnPBIOS: Disabled by ACPI PNP
[ 0.584483] PCI: max bus depth: 1 pci_try_num: 2
[ 0.584503] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
[ 0.584505] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.584507] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.584510] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.584512] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.584515] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.584517] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.584519] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.584521] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.584525] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.584526] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.584528] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.584530] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.584533] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.584535] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.584538] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.584541] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.584544] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.584549] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.584551] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.584554] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.584557] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.584571] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.584573] pci 0000:00:03.0: setting latency timer to 64
[ 0.584582] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.584584] pci 0000:00:05.0: setting latency timer to 64
[ 0.584591] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.584593] pci 0000:00:0a.0: setting latency timer to 64
[ 0.584600] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.584603] pci 0000:00:15.0: setting latency timer to 64
[ 0.584605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.584607] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.584608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.584610] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.584612] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.584613] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.584615] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.584616] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.584618] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.584620] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.584621] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.584623] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.584624] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.584626] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.584628] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.584629] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.584631] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.584632] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.584634] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.584635] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.584637] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.584638] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.584640] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.584642] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.584643] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.584665] NET: Registered protocol family 2
[ 0.584707] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.584841] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.585166] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.585328] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.585330] TCP reno registered
[ 0.585332] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.585338] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.585398] NET: Registered protocol family 1
[ 0.872174] pci 0000:01:00.0: Boot video device
[ 0.872204] PCI: CLS 4 bytes, default 64
[ 0.872515] audit: initializing netlink socket (disabled)
[ 0.872522] type=2000 audit(1329239772.872:1): initialized
[ 0.894595] highmem bounce pool size: 64 pages
[ 0.894599] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.911902] VFS: Disk quotas dquot_6.5.2
[ 0.911949] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.912405] fuse init (API version 7.16)
[ 0.912461] msgmni has been set to 1599
[ 0.912871] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.912904] io scheduler noop registered
[ 0.912906] io scheduler deadline registered
[ 0.912915] io scheduler cfq registered (default)
[ 0.912996] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.913019] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
[ 0.913047] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.913064] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.913090] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.913108] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 0.913175] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.913190] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.913269] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.913273] ACPI: Power Button [PWRB]
[ 0.913302] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.913304] ACPI: Power Button [PWRF]
[ 0.913320] ACPI: acpi_idle registered with cpuidle
[ 0.913336] ACPI: processor limited to max C-state 1
[ 1.112536] ERST: Table is not found!
[ 1.112583] isapnp: Scanning for PnP cards...
[ 1.112607] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.132953] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.465846] isapnp: No Plug & Play device found
[ 1.489353] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.489510] Linux agpgart interface v0.103
[ 1.490373] brd: module loaded
[ 1.490707] loop: module loaded
[ 1.490818] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.490848] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
[ 1.490852] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.490866] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 1.490874] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 1.491052] Fixed MDIO Bus: probed
[ 1.491068] PPP generic driver version 2.4.2
[ 1.491089] tun: Universal TUN/TAP device driver, 1.6
[ 1.491091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.491136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.491144] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.491153] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.491172] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.491178] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.491189] QUIRK: Enable AMD PLL fix
[ 1.491197] ehci_hcd 0000:00:12.2: debug port 1
[ 1.491218] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 1.500073] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.500153] hub 1-0:1.0: USB hub found
[ 1.500156] hub 1-0:1.0: 5 ports detected
[ 1.500203] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.500211] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.500230] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.500235] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.500249] ehci_hcd 0000:00:13.2: debug port 1
[ 1.500259] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 1.512073] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.512147] hub 2-0:1.0: USB hub found
[ 1.512149] hub 2-0:1.0: 5 ports detected
[ 1.512194] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.512203] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.512222] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.512227] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.512242] ehci_hcd 0000:00:16.2: debug port 1
[ 1.512251] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 1.524074] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.524146] hub 3-0:1.0: USB hub found
[ 1.524148] hub 3-0:1.0: 4 ports detected
[ 1.524191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.524200] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.524208] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.524233] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.524256] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 1.584178] hub 4-0:1.0: USB hub found
[ 1.584183] hub 4-0:1.0: 5 ports detected
[ 1.584227] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.584237] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.584256] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.584269] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 1.644129] hub 5-0:1.0: USB hub found
[ 1.644134] hub 5-0:1.0: 5 ports detected
[ 1.644179] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.644187] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.644206] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.644218] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 1.704133] hub 6-0:1.0: USB hub found
[ 1.704137] hub 6-0:1.0: 2 ports detected
[ 1.704177] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.704186] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.704211] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.704223] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 1.764120] hub 7-0:1.0: USB hub found
[ 1.764125] hub 7-0:1.0: 4 ports detected
[ 1.764172] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.764213] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.797216] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.797217] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.872076] Refined TSC clocksource calibration: 3415.055 MHz.
[ 1.872080] Switching to clocksource tsc
[ 2.020065] usb 4-5: new low speed USB device number 2 using ohci_hcd
[ 2.048143] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.048192] mousedev: PS/2 mouse device common for all mice
[ 2.048251] rtc_cmos 00:04: RTC can wake from S4
[ 2.048309] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.048332] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.048381] device-mapper: uevent: version 1.0.3
[ 2.048425] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.048444] EISA: Probing bus 0 at eisa.0
[ 2.048446] EISA: Cannot allocate resource for mainboard
[ 2.048447] Cannot allocate resource for EISA slot 1
[ 2.048448] Cannot allocate resource for EISA slot 2
[ 2.048449] Cannot allocate resource for EISA slot 3
[ 2.048450] Cannot allocate resource for EISA slot 4
[ 2.048451] Cannot allocate resource for EISA slot 5
[ 2.048452] Cannot allocate resource for EISA slot 6
[ 2.048453] Cannot allocate resource for EISA slot 7
[ 2.048454] Cannot allocate resource for EISA slot 8
[ 2.048456] EISA: Detected 0 cards.
[ 2.048461] cpufreq-nforce2: No nForce2 chipset.
[ 2.048463] cpuidle: using governor ladder
[ 2.048464] cpuidle: using governor menu
[ 2.048466] EFI Variables Facility v0.08 2004-May-17
[ 2.048625] TCP cubic registered
[ 2.048709] NET: Registered protocol family 10
[ 2.049056] NET: Registered protocol family 17
[ 2.049064] Registering the dns_resolver key type
[ 2.049075] Using IPI No-Shortcut mode
[ 2.049116] PM: Hibernation image not present or could not be loaded.
[ 2.049121] registered taskstats version 1
[ 2.061534] Magic number: 0:549:289
[ 2.061563] tty tty22: hash matches
[ 2.061604] rtc_cmos 00:04: setting system clock to 2012-02-14 17:16:14 UTC (1329239774)
[ 2.061613] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
[ 2.061638] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 2.061639] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 2.061640] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 2.061641] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.061836] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.061838] EDD information not available.
[ 2.061934] Freeing unused kernel memory: 720k freed
[ 2.062100] Write protecting the kernel text: 5528k
[ 2.062144] Write protecting the kernel read-only data: 2240k
[ 2.062145] NX-protecting the kernel data: 4712k
[ 2.072270] udevd[87]: starting version 173
[ 2.085165] ahci 0000:00:11.0: version 3.0
[ 2.085178] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.085223] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 2.085295] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.085297] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.086908] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.086922] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.086925] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.086980] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.087094] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd8fe000
[ 2.087130] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.087134] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.087138] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.087142] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.087146] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.087256] xHCI xhci_add_endpoint called for root hub
[ 2.087258] xHCI xhci_check_bandwidth called for root hub
[ 2.087279] hub 8-0:1.0: USB hub found
[ 2.087284] hub 8-0:1.0: 2 ports detected
[ 2.087326] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.087345] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.093626] scsi0 : ahci
[ 2.095337] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.095365] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 2.096175] scsi1 : ahci
[ 2.098523] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.098537] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.098567] r8169 0000:03:00.0: setting latency timer to 64
[ 2.098607] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.098921] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf8458000, 1c:6f:65:90:29:f9, XID 083000c0 IRQ 49
[ 2.098985] scsi3 : ahci
[ 2.100063] scsi4 : ahci
[ 2.100115] scsi2 : pata_jmicron
[ 2.100175] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 43
[ 2.100178] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 43
[ 2.100180] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 43
[ 2.100183] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 43
[ 2.101051] scsi5 : pata_jmicron
[ 2.101093] ata5: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
[ 2.101095] ata6: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[ 2.101122] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.102053] scsi6 : pata_atiixp
[ 2.104390] scsi7 : pata_atiixp
[ 2.104768] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.104770] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.106757] xHCI xhci_add_endpoint called for root hub
[ 2.106760] xHCI xhci_check_bandwidth called for root hub
[ 2.106780] hub 9-0:1.0: USB hub found
[ 2.106791] hub 9-0:1.0: 2 ports detected
[ 2.109307] Floppy drive(s): fd0 is 1.44M
[ 2.116128] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.116131] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.116136] ahci 0000:05:00.0: setting latency timer to 64
[ 2.117371] scsi8 : ahci
[ 2.117430] scsi9 : ahci
[ 2.117462] ata9: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 17
[ 2.117465] ata10: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 17
[ 2.127800] FDC 0 is a post-1991 82077
[ 2.249326] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
[ 2.249372] generic-usb 0003:046E:55A5.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-5/input0
[ 2.263200] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3
[ 2.263273] generic-usb 0003:046E:55A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-5/input1
[ 2.263282] usbcore: registered new interface driver usbhid
[ 2.263283] usbhid: USB HID core driver
[ 2.424073] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.424106] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.436085] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.440074] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.524058] usb 5-1: new low speed USB device number 2 using ohci_hcd
[ 2.592073] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.592092] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.593194] ata2.00: ATA-8: ST3500413AS, JC45, max UDMA/133
[ 2.593196] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.593563] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB06, max MWDMA2
[ 2.594545] ata2.00: configured for UDMA/133
[ 2.701242] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4
[ 2.701306] generic-usb 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:13.0-1/input0
[ 3.394488] ata1.00: configured for PIO4
[ 4.196253] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB06 PQ: 0 ANSI: 5
[ 4.200500] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.200502] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.200580] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.200624] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.200773] scsi 1:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5
[ 4.200861] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.200876] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.200944] sd 1:0:0:0: [sda] Write Protect is off
[ 4.200947] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.200982] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.232063] sda: sda1 sda2 < sda5 >
[ 4.232313] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.368485] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.424101] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 4.673435] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.924125] firewire_core: created device fw0: GUID 003acdd9001c6f65, S400
[ 11.856129] udevd[383]: starting version 173
[ 11.890699] wmi: Mapper loaded
[ 11.891531] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.891775] lp: driver loaded but no devices found
[ 11.891803] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 11.892328] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 11.893392] nvidia: module license 'NVIDIA' taints kernel.
[ 11.893395] Disabling lock debugging due to kernel taint
[ 11.897102] type=1400 audit(1329239784.331:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=444 comm="apparmor_parser"
[ 11.897391] type=1400 audit(1329239784.331:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
[ 11.897571] type=1400 audit(1329239784.331:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
[ 11.926698] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.934429] Adding 9823228k swap on /dev/sda5. Priority:-1 extents:1 across:9823228k
[ 11.976275] hda_codec: ALC892: BIOS auto-probing.
[ 12.012858] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 12.012944] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 12.012946] hda_intel: Disabling MSI
[ 12.012969] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.227670] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.399903] type=1400 audit(1329239784.831:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=873 comm="apparmor_parser"
[ 12.400188] type=1400 audit(1329239784.835:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=873 comm="apparmor_parser"
[ 12.400356] type=1400 audit(1329239784.835:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=873 comm="apparmor_parser"
[ 12.400686] type=1400 audit(1329239784.835:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=876 comm="apparmor_parser"
[ 12.400991] type=1400 audit(1329239784.835:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=876 comm="apparmor_parser"
[ 12.402211] type=1400 audit(1329239784.835:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=877 comm="apparmor_parser"
[ 12.402546] type=1400 audit(1329239784.835:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=877 comm="apparmor_parser"
[ 12.465714] r8169 0000:03:00.0: eth0: link down
[ 12.465729] r8169 0000:03:00.0: eth0: link down
[ 12.465905] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.536350] init: failsafe main process (788) killed by TERM signal
[ 12.537350] init: apport pre-start process (913) terminated with status 1
[ 12.541244] init: apport post-stop process (935) terminated with status 1
[ 12.692265] Bluetooth: Core ver 2.16
[ 12.692286] NET: Registered protocol family 31
[ 12.692287] Bluetooth: HCI device and connection manager initialized
[ 12.692289] Bluetooth: HCI socket layer initialized
[ 12.692290] Bluetooth: L2CAP socket layer initialized
[ 12.692313] Bluetooth: SCO socket layer initialized
[ 12.693394] Bluetooth: RFCOMM TTY layer initialized
[ 12.693397] Bluetooth: RFCOMM socket layer initialized
[ 12.693398] Bluetooth: RFCOMM ver 1.11
[ 12.693621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.693623] Bluetooth: BNEP filters: protocol multicastMaintenant mon ordinateur démarre en une trentaine de seconde (image carte mère jusqu'a 'loading exploration system..." (15/16 sec) + ubuntu (12/13 sec)), beaucoup plus agréable ! Merci infiniment.
Vous êtes très fort.
Hors ligne
#5 Le 14/02/2012, à 19:49
- malbo
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Pivaz a écrit :
Vous êtes très fort.
Très fort en utilisation de Google. Je ne comprends même pas ce que signifient les lignes de commande qui t'ont sauvé...
Mais je suis content pour toi parce que c'est vicelard comme problème.
Hors ligne
#6 Le 24/09/2019, à 11:23
- malbo
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Bon à savoir : la solution appliquée par Pivaz en 2012 (les deux lignes de commandes qu'il a indiquées au début du post #4) fonctionne encore en 2019 pour Ubuntu 18.04.3 : voir ce fil de Maamon.
Dernière modification par malbo (Le 24/09/2019, à 11:23)
Hors ligne
#7 Le 12/10/2019, à 14:29
- Maamon
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Cela a fonctionné un temps, apparemment le problème est revenu.
Je ferais un retour quand on aura trouvé une solution.
Hors ligne
#8 Le 12/10/2019, à 14:37
- Maamon
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Bon, j'ai refait la manip proposée ci-dessus et ça refonctionne correctement.
Je ne sais pas ce qui a fait resurgir le problème, l'utilisation du lecteur cd peut-être ?
En tout cas la manip fonctionne toujours.
Merci
Hors ligne
#9 Le 12/10/2019, à 15:22
- geole
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Bonjour
Je connais mal la commande sed que tu fais
sudo sed -i '/ATAPI/,+1s/^/#/' /lib/udev/rules.d/60-persistent-storage.rulesMais je pense que cela consiste à ajouter en début de ligne le caractère # pour les lignes contenant le mot ATAPI afin qu'il n'y ait pas de reconnaissance du périphérique.
Comme le problème est revenu, il faudrait penser que le fait de brancher le CD-ROM ré-initialise ce fichier. La vraie correction devrait donc être en amont.
Dernière modification par geole (Le 12/10/2019, à 15:23)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#10 Le 12/10/2019, à 16:09
- ylag
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Salut,
geole a écrit :
Comme le problème est revenu, il faudrait penser que le fait de brancher le CD-ROM ré-initialise ce fichier. La vraie correction devrait donc être en amont.
Le fichier /lib/udev/rules.d/60-persistent-storage.rules pourrait-il avoir été réinitialisé lors d'une mise à jour du paquet udev?
Dans ce cas, une fois le fichier modifié, le recopier dans: /etc/udev/rules.d/ pourrait-il permettre d'en conserver les modifications lors de mises à jour subséquentes de udev ?
Sinon, il faudrait penser à vérifier le contenu de ce fichier après une mise à jour du paquet udev et voir si la mise en commentaire de la règle est encore pertinente.
Pour info, sur ma 18.04 à jour, j'ai ceci concernant ATAPI dans le fichier /lib/udev/rules.d/60-persistent-storage.rules:
yvan@yvan-maison:~$ grep -i atapi -A1 /lib/udev/rules.d/60-persistent-storage.rules
# ATAPI devices (SPC-3 or later)
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
yvan@yvan-maison:~$...la commande: sudo sed -i '/ATAPI/,+1s/^/#/' /lib/udev/rules.d/60-persistent-storage.rules ajoute un « # » au début de ces deux lignes:
yvan@yvan-maison:~$ sudo sed -i '/ATAPI/,+1s/^/#/' /lib/udev/rules.d/60-persistent-storage.rules && grep -i atapi -A1 /lib/udev/rules.d/60-persistent-storage.rules
[sudo] Mot de passe de yvan :
## ATAPI devices (SPC-3 or later)
#KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
yvan@yvan-maison:~$A+
Dernière modification par ylag (Le 12/10/2019, à 16:50)
Hors ligne
#11 Le 12/10/2019, à 19:09
- lynn
Re : [Résolu] Démarrage lent, dsmeg, failed command: IDENTIFY PACKET DEVICE
Bonjour,
On peut même éviter d'écrire un '#' en ne commentant que la ligne concernée... 
sed '/ATAPI/{n;s/^/#/}' /lib/udev/rules.d/60-persistent-storage.rules && grep -i atapi -A1 /lib/udev/rules.d/60-persistent-storage.rules«C'est pas parce qu'ils sont nombreux à avoir tort qu'ils ont raison!»
Coluche
Hors ligne