Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 12/12/2006, à 15:10

Barbarus

Beryl en péril

Bonjour à tous,

J'essaie désespérément de faire fonctionner beryl.

A priori j'ai tout installé comme il fallait, je peux ouvrir tous les paquets relatifs à beryl (beryl manager, emerald et beryl settings).

Quand j'ai le diamant rouge dans le tableau de bord, je peux choisir entre kwin et beryl. Jusque là tout est normal.

Là où se trouve le problème, c'est que quand j'active beryl via ce choix, je n'ai plus rien autour des fenêtres. J'obtiens juste le centre de la fenêtre.

J'ai l'impression que le problème vient de la 3D, mais je ne sais comment vérifier ça.

Ma config:

amd64 et ati radeon (fglrx), à priori la carte graphique est bien installée.

Beryl a été installé via synaptic et voici mon source.list:

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-backports main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-sudo apt-get install beryl beryl-plugins emerald emerald-themesbackports main restricted universe multiverse

deb http://archive.canonical.com edgy-commercial main

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse

deb http://ubuntu.beryl-project.org/ edgy main
deb http://beryl.lupine.me.uk edgy all

Et mon xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  FontPath "/usr/share/fonts/X11/misc"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  
  SubSection "extmod"
    option "omit xfree86-dga"
  EndSubSection
  
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "dbe"
  load "dri"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "be"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
  boardname "ATI Radeon (fglrx)"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 0
  vendorname "ATI"
EndSection

Section "Monitor"# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  FontPath "/usr/share/fonts/X11/misc"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  
  SubSection "extmod"
    option "omit xfree86-dga"
  EndSubSection
  
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "dbe"
  load "dri"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "be"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
  boardname "ATI Radeon (fglrx)"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 0
  vendorname "ATI"
EndSection

Section "Monitor"
  identifier "F-419"
  vendorname "Generic"
  modelname "1024x768 @ 60 Hz"
  HorizSync 31.5-48.5
  VertRefresh 50-70
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
  modeline  "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
  Monitor "F-419"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1024x768@60" "1152x768@54" "800x600@60" "1280x854" "800x600@56" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #  
  identifier "device1"
  boardname "ATI Radeon (fglrx)"
  busid "PCI:1:0:1"
  driver "fglrx"
  screen 0
  vendorname "ATI"
EndSection
Section "screen" #  
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "640x480@60"
  EndSubSection
EndSection
Section "monitor" #  
  identifier "monitor1"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection

  identifier "F-419"
  vendorname "Generic"
  modelname "1024x768 @ 60 Hz"
  HorizSync 31.5-48.5
  VertRefresh 50-70
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
  modeline  "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
  gamma 1.0
EndSection
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  FontPath "/usr/share/fonts/X11/misc"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  
  SubSection "extmod"
    option "omit xfree86-dga"
  EndSubSection
  
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "dbe"
  load "dri"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "be"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
  boardname "ATI Radeon (fglrx)"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 0
  vendorname "ATI"
EndSection

Section "Monitor"
  identifier "F-419"
  vendorname "Generic"
  modelname "1024x768 @ 60 Hz"
  HorizSync 31.5-48.5
  VertRefresh 50-70
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
  modeline  "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
  Monitor "F-419"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1024x768@60" "1152x768@54" "800x600@60" "1280x854" "800x600@56" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #  
  identifier "device1"
  boardname "ATI Radeon (fglrx)"
  busid "PCI:1:0:1"
  driver "fglrx"
  screen 0
  vendorname "ATI"
EndSection
Section "screen" #  
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "640x480@60"
  EndSubSection
EndSection
Section "monitor" #  
  identifier "monitor1"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
  Monitor "F-419"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1024x768@60" "1152x768@54" "800x600@60" "1280x854" "800x600@56" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #  
  identifier "device1"
  boardname "ATI Radeon (fglrx)"
  busid "PCI:1:0:1"
  driver "fglrx"
  screen 0
  vendorname "ATI"
EndSection
Section "screen" #  
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "640x480@60"
  EndSubSection
EndSection
Section "monitor" #  
  identifier "monitor1"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection

Guidez-moi s'il vous plait car là je suis totalement perdu.


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#2 Le 12/12/2006, à 15:25

Astidiel

Re : Beryl en péril

bon, je pense que tu a copier coller trois fois ton xorg.conf, j'en demandais pas autant big_smile

après avoir sélectionné beryl:
est ce que le cube marche (ctrl + alt + fleche gauche ou droite)?
*si oui verifie que le paquet emerald-themes est installé et essaye la commande donné par pcamut dans le post suivant
*si non :
que renvoie la commande :

glxinfo | grep rendering

voila, on verra pour la suite

Dernière modification par Astidiel (Le 12/12/2006, à 15:40)


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#3 Le 12/12/2006, à 15:27

pcamut

Re : Beryl en péril

moi je ne peux lancer beryl que par la ligne de commande suivante :

emerald --remplace & beryl-manager &

l'option 'remplace' doit etre presente sinon j'ai exactement le meme probleme que toi ....


Ubuntu 7.04 - Debian Lenny Amd64
Core2Duo E6320@2.8GHz - 2 Go Ram - 7300Gt PCIe - Asus P5B-e plus - 160 Go et 500 Go - Dual Screen

Hors ligne

#4 Le 12/12/2006, à 15:41

Barbarus

Re : Beryl en péril

Pour les trois fois c'est encore un autre soucis, j'ai ça tout le temps, j'édite un fichier et j'ai plusieurs fois mes copiés collés, mais bon ça c'est une autre histoire.

Le cube n'apparait pas donc

pour la commande glxinfo | grep rendering j'obtiens:

Xlib:  extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No

http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#5 Le 12/12/2006, à 15:59

Astidiel

Re : Beryl en péril

bon, ton problème est résolu dans le tuto de l'installation des drivers fglrx des cartes ati.... paragraphe edgy et compatibilité aiglx,

tu doit rajouter a ton fichier /etc/X11/xorg.conf pour avoir l'acceleration 3d:

Section "Extensions"
Option "Composite" "disable"
EndSection

les drivers fglrx avec cette option ne sont pas compatible avec aiglx, tu va être obligé d'utiliser xgl pour avoir beryl.

pour ça suis ce tuto la
sans prendre en compte les passage ou l'on parle de compiz, et sans réinstaller beryl.

voila!

ajout: par moment il est écrit que cette méthode n'est pas d'actualité, malheureusement pour toi si.:lol:

Dernière modification par Astidiel (Le 12/12/2006, à 16:02)


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#6 Le 12/12/2006, à 16:59

Barbarus

Re : Beryl en péril

J'ai installé xgl, toujours le même problème de bordure inexistante. Maintenant le rendering est bon.

Par contre c'est super instable, je me retrouve sans clavier et suis obligé de redémarrer.

J'ai suivi ce tuto: http://doc.ubuntu-fr.org/applications/xgl/kde

sudo chmod 755 /usr/bin/startxgl.sh && sudo chmod 755 ~/.compiz -R

ça me dit que le fichier n'existe pas alors que tout est bien là.

Fin bref, c'est le foutoir total maintenant.


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#7 Le 12/12/2006, à 17:17

Barbarus

Re : Beryl en péril

La commande emerald --remplace & beryl-manager &

me renvoie:

[1] 4960
[2] 4961
barbarus@barbarus-desktop:~$ X Error: BadDevice, invalid or uninitialized input
device 157
  Major opcode:  148
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
  Major opcode:  148
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
  Major opcode:  148
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
  Major opcode:  148
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
  Major opcode:  148
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
  Major opcode:  148
  Minor opcode:  3
  Resource id:  0x0
Failed to open device


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#8 Le 12/12/2006, à 20:47

Astidiel

Re : Beryl en péril

dsl j'aurais du être plus precis, et surtout regarder un peu plus le tuto pour kde... (je suis sur gnome et celui pour gnome est un peu plus a jour)

Le tuto pour kde que tu a suivi est faux (encore desole)

il y a une autre page pour edgy + xgl +kde : ici

pour eviter de tout recommencer, fait ça:

kdesu kate /usr/bin/startxgl.sh

supprime tout et remplace par:

 #!/bin/sh
  Xgl -fullscreen :1 -ac -accel glx:pbuffer -accel xv:pbuffer & sleep 2 && DISPLAY=:1
  exec startkde

enregistre et ferme, puis donne les droits executables:

  sudo chmod 755 /usr/bin/startxgl.sh

comme tu a déjà crée la session xgl sous gdm, tu n'a pas besoin de le refaire, il faut cependant que tu configure kde pour lancer beryl au demarrage:

kdesu kate .kde/Autostart/beryl-manager.desktop

et met ça dedans:

  [Desktop Entry]
  Comment=Beryl-manager
  Exec=/usr/bin/beryl-manager
  Name=Start Beryl
  Icon=
  Type=Application

puis quitte ta session, choisi la session xgl et relogue toi
ça devrais allez mieux! cependant il risque d'y avoir qq pb (clavier, fenetre clignotantes), mais déja beryl devrait se lancer. (on vera la suite après)

Dernière modification par Astidiel (Le 12/12/2006, à 20:48)


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#9 Le 12/12/2006, à 21:42

Barbarus

Re : Beryl en péril

Toujours la même chose concernant les fenêtres, je n'ai que le centre, je vois pas trop d'où peut provenir le problème.

En fait je pense qu'il y a aussi un soucis du côté des sources, certaines semblent incorrectes, mais je ne sais dire lesquelles je peux enlever.

Voici mon sourlist :

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-backports main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-sudo apt-get install beryl beryl-plugins emerald emerald-themesbackports main restricted universe multiverse

deb http://archive.canonical.com edgy-commercial main

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse
#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-backports main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-sudo apt-get install beryl beryl-plugins emerald emerald-themesbackports main restricted universe multiverse

deb http://archive.canonical.com edgy-commercial main

#//FR
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse

deb http://ubuntu.beryl-project.org/ edgy main
deb http://beryl.lupine.me.uk edgy all
deb http://xgl.compiz.info dapper main-amd64

#BERYL 0.1.2
 deb http://beryl-mirror.lupine.me.uk edgy main
 deb-src http://beryl-mirror.lupine.me.uk edgy main
#//International
deb http://archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse

deb http://ubuntu.beryl-project.org/ edgy main
deb http://beryl.lupine.me.uk edgy all
deb http://xgl.compiz.info dapper main-amd64

#BERYL 0.1.2
 deb http://beryl-mirror.lupine.me.uk edgy main
 deb-src http://beryl-mirror.lupine.me.uk edgy main

Et voici ce que ça donne quand je l'upate:

DCOPClient::attachInternal. Attach failed Could not open network socket
Link points to "/tmp/ksocket-root"
Link points to "/tmp/kde-root"
kbuildsycoca running...
KWrited - Écoute le périphérique « /dev/pts/3 »
QObject::disconnect: Unexpected null parameter
barbarus@barbarus-desktop:~$ sudo apt-get update
Réception de : 1 http://archive.canonical.com edgy-commercial Release.gpg [191B]
Ign http://archive.canonical.com edgy-commercial/main Translation-fr
Ign http://xgl.compiz.info dapper Release.gpg
Réception de : 2 http://beryl.lupine.me.uk edgy Release.gpg [191B]
Ign http://beryl.lupine.me.uk edgy/all Translation-fr
Ign http://xgl.compiz.info dapper/main-amd64 Translation-fr
Réception de : 3 http://archive.ubuntu.com edgy Release.gpg [191B]
Atteint http://archive.ubuntu.com edgy/main Translation-fr
Atteint http://archive.canonical.com edgy-commercial Release
Atteint http://beryl.lupine.me.uk edgy Release
Atteint http://archive.ubuntu.com edgy/restricted Translation-fr
Atteint http://archive.ubuntu.com edgy/universe Translation-fr
Atteint http://archive.ubuntu.com edgy/multiverse Translation-fr
Ign http://xgl.compiz.info dapper Release
Réception de : 4 http://ubuntu.beryl-project.org edgy Release.gpg [191B]
Ign http://ubuntu.beryl-project.org edgy/main Translation-fr
Ign http://xgl.compiz.info dapper/main-amd64 Packages
Réception de : 5 http://fr.archive.ubuntu.com edgy Release.gpg [191B]
Atteint http://fr.archive.ubuntu.com edgy/main Translation-fr
Atteint http://fr.archive.ubuntu.com edgy/restricted Translation-fr
Atteint http://fr.archive.ubuntu.com edgy/universe Translation-fr
Atteint http://fr.archive.ubuntu.com edgy/multiverse Translation-fr
Réception de : 6 http://archive.ubuntu.com edgy-updates Release.gpg [191B]
Ign http://archive.ubuntu.com edgy-updates/main Translation-fr
Ign http://archive.ubuntu.com edgy-updates/restricted Translation-fr
Ign http://archive.ubuntu.com edgy-updates/universe Translation-fr
Ign http://archive.ubuntu.com edgy-updates/multiverse Translation-fr
Atteint http://archive.canonical.com edgy-commercial/main Packages
Réception de : 7 http://ubuntu.beryl-project.org edgy Release [8194B]
Err http://xgl.compiz.info dapper/main-amd64 Packages
  404 Not Found
Réception de : 8 http://archive.ubuntu.com edgy-security Release.gpg [191B]
Ign http://archive.ubuntu.com edgy-security/main Translation-fr
Réception de : 9 http://fr.archive.ubuntu.com edgy-updates Release.gpg [191B]
Ign http://fr.archive.ubuntu.com edgy-updates/main Translation-fr
Ign http://fr.archive.ubuntu.com edgy-updates/restricted Translation-fr
Ign http://fr.archive.ubuntu.com edgy-updates/universe Translation-fr
Ign http://fr.archive.ubuntu.com edgy-updates/multiverse Translation-fr
Ign http://archive.ubuntu.com edgy-security/restricted Translation-fr
Ign http://archive.ubuntu.com edgy-security/universe Translation-fr
Ign http://archive.ubuntu.com edgy-security/multiverse Translation-fr
Atteint http://ubuntu.beryl-project.org edgy/main Packages
Atteint http://beryl.lupine.me.uk edgy/all Packages
Err http://beryl-mirror.lupine.me.uk edgy Release.gpg
  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Réception de : 10 http://archive.ubuntu.com edgy-backports Release.gpg [191B]
Ign http://archive.ubuntu.com edgy-backports/main Translation-fr
Réception de : 11 http://fr.archive.ubuntu.com edgy-security Release.gpg [191B]
Ign http://fr.archive.ubuntu.com edgy-security/main Translation-fr
Ign http://fr.archive.ubuntu.com edgy-security/restricted Translation-fr
Ign http://fr.archive.ubuntu.com edgy-security/universe Translation-fr
Ign http://fr.archive.ubuntu.com edgy-security/multiverse Translation-fr
Ign http://archive.ubuntu.com edgy-backports/restricted Translation-fr
Ign http://archive.ubuntu.com edgy-backports/universe Translation-fr
Ign http://archive.ubuntu.com edgy-backports/multiverse Translation-fr
Ign http://archive.ubuntu.com edgy-sudo Release.gpg
Réception de : 12 http://fr.archive.ubuntu.com edgy-backports Release.gpg [191B]
Ign http://fr.archive.ubuntu.com edgy-backports/main Translation-fr
Ign http://fr.archive.ubuntu.com edgy-backports/restricted Translation-fr
Ign http://fr.archive.ubuntu.com edgy-backports/universe Translation-fr
Ign http://fr.archive.ubuntu.com edgy-backports/multiverse Translation-fr
Réception de : 13 http://archive.ubuntu.com edgy-proposed Release.gpg [191B]
Ign http://archive.ubuntu.com edgy-proposed/main Translation-fr
Réception de : 14 http://fr.archive.ubuntu.com edgy-proposed Release.gpg [191B]
Ign http://fr.archive.ubuntu.com edgy-proposed/main Translation-fr
Ign http://archive.ubuntu.com edgy-proposed/restricted Translation-fr
Ign http://archive.ubuntu.com edgy-proposed/universe Translation-fr
Ign http://archive.ubuntu.com edgy-proposed/multiverse Translation-fr
Ign http://fr.archive.ubuntu.com edgy-proposed/restricted Translation-fr
Ign http://fr.archive.ubuntu.com edgy-proposed/universe Translation-fr
Atteint http://archive.ubuntu.com edgy Release
Atteint http://archive.ubuntu.com edgy-updates Release
Atteint http://archive.ubuntu.com edgy-security Release
Atteint http://archive.ubuntu.com edgy-backports Release
Ign http://archive.ubuntu.com edgy-sudo Release
Ign http://fr.archive.ubuntu.com edgy-proposed/multiverse Translation-fr
Atteint http://fr.archive.ubuntu.com edgy Release
Atteint http://fr.archive.ubuntu.com edgy-updates Release
Atteint http://fr.archive.ubuntu.com edgy-security Release
Atteint http://fr.archive.ubuntu.com edgy-backports Release
Atteint http://fr.archive.ubuntu.com edgy-proposed Release
Atteint http://archive.ubuntu.com edgy-proposed Release
Ign http://archive.ubuntu.com edgy-sudo/apt-get Sources
Ign http://archive.ubuntu.com edgy-sudo/install Sources
Ign http://archive.ubuntu.com edgy-sudo/beryl Sources
Ign http://archive.ubuntu.com edgy-sudo/beryl-plugins Sources
Ign http://archive.ubuntu.com edgy-sudo/emerald Sources
Ign http://archive.ubuntu.com edgy-sudo/emerald-themesbackports Sources
Ign http://archive.ubuntu.com edgy-sudo/main Sources
Ign http://archive.ubuntu.com edgy-sudo/restricted Sources
Ign http://archive.ubuntu.com edgy-sudo/universe Sources
Ign http://archive.ubuntu.com edgy-sudo/multiverse Sources
Atteint http://archive.ubuntu.com edgy/main Packages
Atteint http://archive.ubuntu.com edgy/restricted Packages
Atteint http://archive.ubuntu.com edgy/universe Packages
Atteint http://archive.ubuntu.com edgy/multiverse Packages
Atteint http://archive.ubuntu.com edgy/main Sources
Atteint http://archive.ubuntu.com edgy/restricted Sources
Atteint http://archive.ubuntu.com edgy/universe Sources
Atteint http://archive.ubuntu.com edgy/multiverse Sources
Atteint http://archive.ubuntu.com edgy-updates/main Packages
Atteint http://archive.ubuntu.com edgy-updates/restricted Packages
Atteint http://archive.ubuntu.com edgy-updates/universe Packages
Atteint http://archive.ubuntu.com edgy-updates/multiverse Packages
Atteint http://archive.ubuntu.com edgy-updates/main Sources
Atteint http://archive.ubuntu.com edgy-updates/restricted Sources
Atteint http://archive.ubuntu.com edgy-updates/universe Sources
Atteint http://archive.ubuntu.com edgy-updates/multiverse Sources
Err http://archive.ubuntu.com edgy-sudo/apt-get Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/install Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/beryl Sources
  404 Not Found
Err http://beryl-mirror.lupine.me.uk edgy/main Translation-fr
  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Err http://archive.ubuntu.com edgy-sudo/beryl-plugins Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/emerald Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/emerald-themesbackports Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/main Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/restricted Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/universe Sources
  404 Not Found
Err http://archive.ubuntu.com edgy-sudo/multiverse Sources
  404 Not Found
Atteint http://archive.ubuntu.com edgy-security/main Packages
Atteint http://archive.ubuntu.com edgy-security/restricted Packages
Atteint http://archive.ubuntu.com edgy-security/universe Packages
Atteint http://archive.ubuntu.com edgy-security/multiverse Packages
Atteint http://archive.ubuntu.com edgy-security/main Sources
Atteint http://archive.ubuntu.com edgy-security/restricted Sources
Atteint http://archive.ubuntu.com edgy-security/universe Sources
Atteint http://archive.ubuntu.com edgy-security/multiverse Sources
Atteint http://archive.ubuntu.com edgy-backports/main Packages
Atteint http://archive.ubuntu.com edgy-backports/restricted Packages
Atteint http://archive.ubuntu.com edgy-backports/universe Packages
Atteint http://archive.ubuntu.com edgy-backports/multiverse Packages
Ign http://beryl-mirror.lupine.me.uk edgy Release
Atteint http://fr.archive.ubuntu.com edgy/main Packages
Atteint http://fr.archive.ubuntu.com edgy/restricted Packages
Atteint http://fr.archive.ubuntu.com edgy/universe Packages
Atteint http://archive.ubuntu.com edgy-proposed/main Packages
Atteint http://archive.ubuntu.com edgy-proposed/restricted Packages
Atteint http://archive.ubuntu.com edgy-proposed/universe Packages
Atteint http://archive.ubuntu.com edgy-proposed/multiverse Packages
Atteint http://fr.archive.ubuntu.com edgy/multiverse Packages
Atteint http://fr.archive.ubuntu.com edgy/main Sources
Atteint http://fr.archive.ubuntu.com edgy/restricted Sources
Atteint http://fr.archive.ubuntu.com edgy/universe Sources
Atteint http://fr.archive.ubuntu.com edgy/multiverse Sources
Atteint http://fr.archive.ubuntu.com edgy-updates/main Packages
Atteint http://fr.archive.ubuntu.com edgy-updates/restricted Packages
Atteint http://fr.archive.ubuntu.com edgy-updates/universe Packages
Atteint http://fr.archive.ubuntu.com edgy-updates/multiverse Packages
Atteint http://fr.archive.ubuntu.com edgy-updates/main Sources
Atteint http://archive.ubuntu.com edgy-proposed/main Sources
Atteint http://archive.ubuntu.com edgy-proposed/restricted Sources
Atteint http://archive.ubuntu.com edgy-proposed/universe Sources
Atteint http://archive.ubuntu.com edgy-proposed/multiverse Sources
Atteint http://fr.archive.ubuntu.com edgy-updates/restricted Sources
Atteint http://fr.archive.ubuntu.com edgy-updates/universe Sources
Atteint http://fr.archive.ubuntu.com edgy-updates/multiverse Sources
Atteint http://fr.archive.ubuntu.com edgy-security/main Packages
Atteint http://fr.archive.ubuntu.com edgy-security/restricted Packages
Atteint http://fr.archive.ubuntu.com edgy-security/universe Packages
Atteint http://fr.archive.ubuntu.com edgy-security/multiverse Packages
Atteint http://fr.archive.ubuntu.com edgy-security/main Sources
Atteint http://fr.archive.ubuntu.com edgy-security/restricted Sources
Atteint http://fr.archive.ubuntu.com edgy-security/universe Sources
Atteint http://fr.archive.ubuntu.com edgy-security/multiverse Sources
Atteint http://fr.archive.ubuntu.com edgy-backports/main Packages
Atteint http://fr.archive.ubuntu.com edgy-backports/restricted Packages
Atteint http://fr.archive.ubuntu.com edgy-backports/universe Packages
Atteint http://fr.archive.ubuntu.com edgy-backports/multiverse Packages
Atteint http://fr.archive.ubuntu.com edgy-backports/main Sources
Atteint http://fr.archive.ubuntu.com edgy-backports/restricted Sources
Atteint http://fr.archive.ubuntu.com edgy-backports/universe Sources
Atteint http://fr.archive.ubuntu.com edgy-backports/multiverse Sources
Atteint http://fr.archive.ubuntu.com edgy-proposed/main Packages
Atteint http://fr.archive.ubuntu.com edgy-proposed/restricted Packages
Atteint http://fr.archive.ubuntu.com edgy-proposed/universe Packages
Atteint http://fr.archive.ubuntu.com edgy-proposed/multiverse Packages
Atteint http://fr.archive.ubuntu.com edgy-proposed/main Sources
Atteint http://fr.archive.ubuntu.com edgy-proposed/restricted Sources
Atteint http://fr.archive.ubuntu.com edgy-proposed/universe Sources
Atteint http://fr.archive.ubuntu.com edgy-proposed/multiverse Sources
Ign http://beryl-mirror.lupine.me.uk edgy/main Packages
Ign http://beryl-mirror.lupine.me.uk edgy/main Sources
Err http://beryl-mirror.lupine.me.uk edgy/main Packages
  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Err http://beryl-mirror.lupine.me.uk edgy/main Sources
  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
8207o réceptionnés en 11s (726o/s)
Impossible de récupérer http://beryl-mirror.lupine.me.uk/dists/edgy/Release.gpg  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Impossible de récupérer http://beryl-mirror.lupine.me.uk/dists/edgy/main/i18n/Translation-fr.bz2  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Impossible de récupérer http://xgl.compiz.info/dists/dapper/main-amd64/binary-amd64/Packages.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/apt-get/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/install/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/beryl/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/beryl-plugins/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/emerald/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/emerald-themesbackports/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/main/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/restricted/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/universe/source/Sources.gz  404 Not Found
Impossible de récupérer http://archive.ubuntu.com/ubuntu/dists/edgy-sudo/multiverse/source/Sources.gz  404 Not Found
Impossible de récupérer http://beryl-mirror.lupine.me.uk/dists/edgy/main/binary-amd64/Packages.gz  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Impossible de récupérer http://beryl-mirror.lupine.me.uk/dists/edgy/main/source/Sources.gz  Ne parvient pas à résoudre « beryl-mirror.lupine.me.uk »
Lecture des listes de paquets... Fait
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ #//FR
barbarus@barbarus-desktop:~$ deb http://fr.archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://fr.archive.ubuntu.com/ubuntu edgy main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$ #//International
barbarus@barbarus-desktop:~$ deb http://archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://archive.ubuntu.com/ubuntu edgy main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ #//FR
barbarus@barbarus-desktop:~$ deb http://fr.archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://fr.archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$ #//International
barbarus@barbarus-desktop:~$ deb http://archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ #//FR
barbarus@barbarus-desktop:~$ deb http://fr.archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://fr.archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$ #//International
barbarus@barbarus-desktop:~$ deb http://archive.ubuntu.com/ubuntu/ edgy-security main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://archive.ubuntu.com/ubuntu edgy-security main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ #//FR
barbarus@barbarus-desktop:~$ deb http://fr.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://fr.archive.ubuntu.com/ubuntu edgy-backports main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$ #//International
barbarus@barbarus-desktop:~$ deb http://archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://archive.ubuntu.com/ubuntu edgy-sudo apt-get install beryl beryl-plugins emerald emerald-themesbackports main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ deb http://archive.canonical.com edgy-commercial main
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ #//FR
barbarus@barbarus-desktop:~$ deb http://fr.archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://fr.archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$ #//International
barbarus@barbarus-desktop:~$ deb http://archive.ubuntu.com/ubuntu/ edgy-proposed main restricted universe multiverse
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb-src http://archive.ubuntu.com/ubuntu edgy-proposed main restricted universe multiverse
bash: deb-src : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ deb http://ubuntu.beryl-project.org/ edgy main
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb http://beryl.lupine.me.uk edgy all
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$ deb http://xgl.compiz.info dapper main-amd64
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$
barbarus@barbarus-desktop:~$ #BERYL 0.1.2
barbarus@barbarus-desktop:~$  deb http://beryl-mirror.lupine.me.uk edgy main
bash: deb : commande introuvable
barbarus@barbarus-desktop:~$  deb-src http://beryl-mirror.lupine.me.uk edgy main

http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#10 Le 12/12/2006, à 21:43

Barbarus

Re : Beryl en péril

Je l'ajoute après pour que ça se voit: merci pour ton aide wink


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#11 Le 12/12/2006, à 23:03

Astidiel

Re : Beryl en péril

Mais de rien!

c'est un peu le fouilli dans ton sources.list... surtout avec tes pb de copier coller!

je te conseille d'enlever tout ce que tu a rajouté pour beryl, et remplace les par ça:

#beryl
deb http://ubuntu.beryl-project.org edgy main

#xgl
deb http://media.blutkind.org/xgl/ edgy main-edgy

puis dans la console

 wget http://beryl-mirror.pricechild.co.uk/root@lupine.me.uk.gpg -O- | sudo apt-key add -

ensuite fait

sudo apt-get update

vérifie que les dépots que j'ai cité fonctionne (tu auras d'autres erreur mais qui n'ont rien a voir avec ces dépots la)

voila pour le nettoyage, ensuite lance beryl dans un terminal et met le résultat ici

Dernière modification par Astidiel (Le 12/12/2006, à 23:04)


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#12 Le 12/12/2006, à 23:43

Balkoth

Re : Beryl en péril

Bonsoir,

Pour compléter le nettoyage de ton sources.list, je te conseille de le remplacer par une version propre :

## Main
deb http://fr.archive.ubuntu.com/ubuntu/ edgy main restricted universe multiverse
#deb-src http://fr.archive.ubuntu.com/ubuntu edgy main restricted universe multiverse

## Major bug fix updates
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-updates main restricted universe multiverse
#deb-src http://fr.archive.ubuntu.com/ubuntu edgy-updates main restricted universe multiverse

## Security
deb http://security.ubuntu.com/ubuntu edgy-security main restricted universe multiverse

## Backports
deb http://fr.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse
#deb-src http://fr.archive.ubuntu.com/ubuntu edgy-backports main restricted universe multiverse

## Beryl
deb http://ubuntu.beryl-project.org edgy main

## xgl
deb http://media.blutkind.org/xgl/ edgy main-edgy

# Medibuntu (ex-PLF)
deb http://medibuntu.sos-sts.com/repo/ edgy free non-free

Ensuite, tapes sudo aptitude update et sudo aptitude upgrade dans la console pour mettre à jour.

Hors ligne

#13 Le 13/12/2006, à 11:38

Barbarus

Re : Beryl en péril

Ok merci, je vais faire ça dés que possible, en tout cas super les conseils, au moins là je suis sûr de ce que je fais wink


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#14 Le 13/12/2006, à 17:41

Barbarus

Re : Beryl en péril

sudo aptitude update me donne à la fin:

Lecture des listes de paquets... Fait
W: GPG error: http://medibuntu.sos-sts.com edgy Release: Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY 2EBC26B60C5A2783
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.

Je fais donc le apt-get update et ça me donne la même chose à la fin.

sudo aptitude upgrade est en cours mais je lance le sujet au cas où. Je reviens de suite pour mettre la suite wink

Voilà la suite s'est bien passée, il m'a mit à jour pas mal de trucs wink

Dernière modification par Barbarus (Le 13/12/2006, à 17:50)


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#15 Le 13/12/2006, à 18:04

Barbarus

Re : Beryl en péril

Et voilà ce que donne beryl, il n'y a rien sur les fenêtres, je crains fort que ça ne fonctionnera pas chez moi. Dommage.

mini_capture3.png


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#16 Le 13/12/2006, à 18:18

Astidiel

Re : Beryl en péril

Barbarus a écrit :

Et voilà ce que donne beryl, il n'y a rien sur les fenêtres, je crains fort que ça ne fonctionnera pas chez moi. Dommage.

http://www.mezimages.com/image/barbarus … pture3.png

mais si!, patience et longueur de temps! le truc c'est comme c'est un peu le bazar dans le wiki (on est en train d'arranger ça), c'est pas évident de savoir qu'est ce que tu a fait exactement et donc qu'est ce qui ne va pas chez toi!


lance beryl-xgl à partir d'un terminal et poste les messages qu'il te dit.


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#17 Le 13/12/2006, à 18:39

Barbarus

Re : Beryl en péril

barbarus@barbarus-desktop:~$ beryl-xgl
XGL Present
Erreur de segmentation
barbarus@barbarus-desktop:~$

C'est clair que je ne m'y retrouve plus non plus, j'ai l'impression d'avancer à l'aveuglette lol Mais ça va, y a le sauveur avec toutes les commandes magiques wink
Pour le résultat le "erreur de segmentation" me semble pas bon du tout.

Alors docteur? C'est grave?

Merci wink


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#18 Le 13/12/2006, à 19:31

Astidiel

Re : Beryl en péril

vi!!

desinstalle completement beryl avec synaptic (mais pas xgl: cherche beryl avec synaptic et supprime tout ce qu'il y a), puis:

sudo apt-get update
sudo apt-get install beryl emerald-themes

si jamais après reinstallation ça recommence, supprime les fichiers beryl-settings.mo et beryl-plugins.mo dans /usr/share/locale/fr_FR/LC_MESSAGES/ :

sudo rm /usr/share/locale/fr_FR/LC_MESSAGES/beryl-settings.mo
sudo rm /usr/share/locale/fr_FR/LC_MESSAGES/beryl-plugins.mo

Dernière modification par Astidiel (Le 13/12/2006, à 19:32)


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#19 Le 14/12/2006, à 13:03

Barbarus

Re : Beryl en péril

Bonjour,

Ca ne donne toujours rien de mieux, c'est toujours les mêmes problèmes.

Là je suis ko avec ces erreurs, je suppose qu'il n'y a pas autre chose que beryl? Bref, tant pis, je ferais sans bureau 3d.

Mais ce n'est pas le seul problème, je crois que mon pc n'est pas fait pour kubuntu à vrai dire, c'est la seule distribution qui accepte ma clé asus wifi. Le flash non plus ne fonctionne toujours pas, des problèmes de copier coller, ... maintenant ça, bref, trop instable chez moi, c'est surement dû au matériel (beaucoup trop de trucs à installer séparément et trop de bidouillage foireux à faire).


http://www.winetux.be
http://belgant.winetux.be

Hors ligne

#20 Le 14/12/2006, à 20:32

Astidiel

Re : Beryl en péril

dommage, mais je voit pas d'autre truc à faire, mais c'est sur que si ton système est instable ce n'était pas une bonne idée d'installer beryl, qui est encore en développement.


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#21 Le 14/12/2006, à 20:40

angelique67

Re : Beryl en péril

si tu as des probleme avec beryl mon copain peut peut etre t'aider, cest greenlynx contacte le ou je lui dirais que tu as des petits problemes avec et il t'aidera.

#22 Le 14/12/2006, à 20:54

Mathieu11

Re : Beryl en péril

Bonsoir,
As-tu installe xserver-xgl ?

sudo apt-get install xserver-xgl

Vostro 1400

Hors ligne

#23 Le 14/12/2006, à 21:09

Astidiel

Re : Beryl en péril

Mathieu11 a écrit :

Bonsoir,
As-tu installe xserver-xgl ?

sudo apt-get install xserver-xgl

Mathieu11, remonte un peu voir les derniers posts... oui il a XGL installé et qui marche, il a juste une erreur de segmentation...

Sinon Barbarus tu peut aller voir ce fil qui parle du même genre d'erreur.


Ou sinon va voir sur ce fil du forum officiel


Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#24 Le 14/12/2006, à 21:41

Mathieu11

Re : Beryl en péril

@Asitidiel
En fait je mettais ca juste pour etre sur parce que le lien que tu lui as file en tuto pour installer xgl n'indique nulle part de taper cette commande dans la console...
Pas mal de monde pense qu'installer fglrx installes xgl....


Vostro 1400

Hors ligne

#25 Le 15/12/2006, à 10:54

Barbarus

Re : Beryl en péril

Bonjour à tous,

J'ai eu quelques soucis hier, plus moyen de démarrer le pc, plus de serveur graphique, plus de souris avant ça, etc etc etc.

Ca a été un enchaînement de problème, je me suis résolu à réinstaller après quatre ou cinq heures de prise de tête. Alors j'ai essayé mandriva et tout a fonctionné du premier coup sans rien paramétrer.

Mais je tiens à signaler quelques trucs que j'ai observé, en fait sur mandriva il est utilisé compiz et non beryl, je pense bien que le problème venait de là (Astidiel l'a dit avec l'instabilité wink ).

Si je réinstalle kubuntu j'essayerai compiz au lieu de beryl, en attendant je vais rester sous mandriva, hey oui faut que je travaille aussi, là j'ai passé tout mon temps à essayer de faire tourner beryl lol

En tout cas merci pour tout et franchement vous êtes super wink


http://www.winetux.be
http://belgant.winetux.be

Hors ligne