Ubuntu-fr

underds

Réinstallation de LAMP. (Apache)

Bonjours à tous et merci pour tout ces judicieux conseils et aides.

  Voila, je suis nouveaux dans le monde des serveurs et de Linux. Je m'était créer un petit site et forum ainsi qu'un serveur de jeux sous windoz, mais les attaques de malware et virus on eu tôt fait de mon serveur.
Alors j'ai changer mon dual boot pour un boot linux, faut dire que j'aime bien bidouiller la dedans.
   
  Enfin, j'installe mon Ubuntu edgy, et je bidouille le poste a mon goûts avec le twinview nvidia, wine pour mon wow, le flash/java et j'en passe. Avec mon architecture amd64 c'était pas toujours evident , faut lire!!!
  Bon, la j'avais à peut près tout, manquait juste le serveur web, on finit par tomber en amour avec sa config tellement on la sens!!:P
 
  Je lis l'ecxellent Tuto de M  Declercq, merci. Tout va merveille, je comprends ça deviens clair, alors je décide de pousser un peu, j'installe des libs supplémentaire, je pauffine, J'apprend le dns et le smtp au cour de mes lectures, j'apprend(et j'ai pas fini)... Et la, suite a une fausse manip concernant mon php, je me retrouve avec l'erreur du téléchargement lors de l'ouverture de page phpmyadmin, phpbb etc. Apache2 ne reconnait pas le php, alors je bidouille pour essayer d'arranger ca, je lis, je rebidouille, je foire, je lis...:rolleyes:. J'ai presque réparé en réinstallant Apache avec le php4, mais au reboot ça a laché et depuis je suis un peu perdu. J'ai lu le comentaire de M. Declercrq à propos du bug de lien persistant lors de la réinstallation de appache et du trou qu'il y avait à ce propos.
   
  Maintenant, je voudrais bien aider à la création du tuto sur ce sujet, mais j'aurais besoin d'aide de personne qualifier en ce domaine. Mon système a toute les caractéristiques pour ètre le cobaye, et j'ai envie de participer à ce merveilleu projet qu'est le open source.

   Sincèrement vôtre, Underds.

Dernière modification par underds (Le 15/12/2006, à 08:58)

claudio78

Re : Réinstallation de LAMP. (Apache)

C'est quoi en fait la fausse manip concernant ton php?

underds

Re : Réinstallation de LAMP. (Apache)

Simple j'ai installer php4 et le paquet libapache2-mod-php4, du coup il a desinstaller libapache2-mod-php5, j'ai accepter trop vite le remplacement... Mais ca c'est que le début, j'ai tellement jouer pour réparer, ( réinstal du module 4-5 reinstall de apache-2,etc).
  Qu'une install clean s'impose. Mais je voudrais essayer de sauver le reste du system.
Autrement dit juste réinstaller un Lamp clean, ou réparé celui la, tout fonctionne j'ai juste le php qui bug.   
Merci de ta réponse, désoler pour la réplique tardive, je reste au Québec.
  Underds

underds

Re : Réinstallation de LAMP. (Apache)

Ok alors voilà, mon apache2.conf

# Based upon the NCSA server configuration files originally by Rob McCool.
# Changed extensively for the Debian package by Daniel Stone <daniel@sfarc.net>
# and also by Thom May <thom@debian.org>.

ServerName underds.no-ip.info

# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.

ServerRoot "/etc/apache2"

# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename. 

LockFile /var/lock/apache2/accept.lock

# PidFile: The file in which the server should record its process
# identification number when it starts.

PidFile /var/run/apache2.pid

# Timeout: The number of seconds before receives and sends time out.

TimeOut 300

# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.

KeepAlive on

# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.

MaxKeepAliveRequests 100

# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.

KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers ......... number of server processes to start
# MinSpareServers ...... minimum number of server processes which are kept spare
# MaxSpareServers ...... maximum number of server processes which are kept spare
# MaxClients ........... maximum number of server processes allowed to start
# MaxRequestsPerChild .. maximum number of requests a server process serves
<IfModule prefork.c>
StartServers         5
MinSpareServers      5
MaxSpareServers     10
MaxClients          20
MaxRequestsPerChild  0
</IfModule>

# pthread MPM
# StartServers ......... initial  number of server processes to start
# MaxClients ........... maximum  number of server processes allowed to start
# MinSpareThreads ...... minimum  number of worker threads which are kept spare
# MaxSpareThreads ...... maximum  number of worker threads which are kept spare
# ThreadsPerChild ...... constant number of worker threads in each server process
# MaxRequestsPerChild .. maximum  number of requests a server process serves
<IfModule worker.c>
StartServers         2
MaxClients         150 
MinSpareThreads     25
MaxSpareThreads     75
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

# perchild MPM
# NumServers ........... constant number of server processes
# StartThreads ......... initial  number of worker threads in each server process
# MinSpareThreads ...... minimum  number of worker threads which are kept spare
# MaxSpareThreads ...... maximum  number of worker threads which are kept spare
# MaxThreadsPerChild ... maximum  number of worker threads in each server process
# MaxRequestsPerChild .. maximum  number of connections per server process (then it dies)
<IfModule perchild.c>
NumServers           5
StartThreads         5
MinSpareThreads      5
MaxSpareThreads     10
MaxThreadsPerChild  20
MaxRequestsPerChild  0
AcceptMutex fcntl
</IfModule>


# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent


# Global error log.
ErrorLog /var/log/apache2/error.log

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

# Include generic snippets of statements
Include /etc/apache2/conf.d/[^.#]*

#Let's have some Icons, shall we?
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

# Set up the default error docs.
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can Internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use 
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line;
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/local/apache2/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    Alias /error/ "/usr/share/apache2/error/"

    <Directory "/usr/share/apache2/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>

    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    ErrorDocument 410 /error/HTTP_GONE.html.var
    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

DirectoryIndex index.html index.cgi index.pl index.php index.xhtml

# UserDir is now a module
#UserDir public_html
#UserDir disabled root

#<Directory /home/*/public_html>
#	AllowOverride FileInfo AuthConfig Limit
#	Options Indexes SymLinksIfOwnerMatch IncludesNoExec
#</Directory>

AccessFileName .htaccess

<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

UseCanonicalName off

TypesConfig /etc/mime.types
DefaultType text/plain

HostNameLookups on

IndexOptions FancyIndexing VersionSort

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

# This really should be .jpg.

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^


# This is from Matty J's patch. Anyone want to make the icons?
#AddIcon /icons/dirsymlink.jpg ^^SYMDIR^^
#AddIcon /icons/symlink.jpg ^^SYMLINK^^

DefaultIcon /icons/unknown.gif

ReadmeName README.html
HeaderName HEADER.html

IndexIgnore .??* *~ *# HEADER* RCS CVS *,t

AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw

LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw


AddDefaultCharset	ISO-8859-1

AddCharset ISO-8859-1  .iso8859-1  .latin1
AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
AddCharset ISO-8859-3  .iso8859-3  .latin3
AddCharset ISO-8859-4  .iso8859-4  .latin4
AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb	
AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5        .Big5       .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251   .win-1251
AddCharset CP866       .cp866
AddCharset KOI8-r      .koi8-r .koi8-ru
AddCharset KOI8-ru     .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8       .utf8

AddCharset GB2312      .gb2312 .gb 
AddCharset utf-7       .utf7
AddCharset utf-8       .utf8
AddCharset big5	       .big5 .b5
AddCharset EUC-TW      .euc-tw	
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis

#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps

AddType application/x-tar .tgz

# To use CGI scripts outside /cgi-bin/:
#
#AddHandler cgi-script .cgi

# To use server-parsed HTML files
#
<FilesMatch "\.shtml(\..+)?$">
    SetOutputFilter INCLUDES
</FilesMatch>

# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map

BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a 
# problem with Microsoft WebFolders which does not appropriately handle 
# redirects for folders with DAV methods.
#

BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully 
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully

# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>

# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/[^.#]*
ServerAdmin webmaster@localhost
ServerTokens ProductOnly
ServerName 127.0.0.1

underds

Re : Réinstallation de LAMP. (Apache)

et mon php5.conf

<IfModule mod_php5.c>
  AddType application/x-httpd-php .php .phtml .php3
  AddType application/x-httpd-php-source .phps
</IfModule>

Ainsi que mon sites-available, il n'y a que le default dedans

NameVirtualHost *
<VirtualHost *>
ServerAdmin webmaster@localhost
	
DocumentRoot /var/www
	<Directory />
		Options FollowSymLinks
		AllowOverride None
	</Directory>
	<Directory /var/www/>
		Options Indexes FollowSymLinks MultiViews
		AllowOverride None
		Order allow,deny
		allow from all
		# Uncomment this directive is you want to see apache2's
		# default start page (in /apache2-default) when you go to /
		#RedirectMatch ^/$ /apache2-default/
	</Directory>

	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
	<Directory "/usr/lib/cgi-bin">
		AllowOverride None
		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
		Order allow,deny
		Allow from all
	</Directory>

	ErrorLog /var/log/apache2/error.log

	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	LogLevel warn

	CustomLog /var/log/apache2/access.log combined
	ServerSignature On

    Alias /doc/ "/usr/share/doc/"
    <Directory "/usr/share/doc/">
        Options Indexes MultiViews FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
        Allow from 127.0.0.0/255.0.0.0 ::1/128
    </Directory>
HostNameLookups on

</VirtualHost>