Ubuntu-fr

paparasta

Problème pour installer beryl

Salut tous, j'aimerai installer beryl mais petit souci de driver graphique... J'ai les drivers libres ati seulement lorsque je fais :

glxinfo | grep direct

j'obtiens comme réponse :

libGL warning: 3D driver claims to not support visual 0x4b
direct rendering: Yes

Je n'arrive pas à trouver une solution donc si quelqu'un en a une, je suis preneur !

Mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Carte vidéo générique"
	Driver		"ati"
	BusID		"PCI:1:0:0"
#	Option "DRI" "true" 
#	Option "ColorTiling" "on"
#	Option "EnablePageFlip" "true"
#	Option "AccelMethod" "EXA"
#	Option "XAANoOffscreenPixmaps"
#	Option "RenderAccel" "true"
#	Option "AGPFastWrite" "on"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Carte vidéo générique"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x800"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
#	Option          "AIGLX"         "true"
EndSection

Section "DRI"
	Mode	0666
EndSection

Jean Lussier

Re : Problème pour installer beryl

@paparasta

Salut tous, j'aimerai installer beryl mais petit souci de driver graphique... J'ai les drivers libres ati seulement lorsque je fais :
Code:

glxinfo | grep direct

j'obtiens comme réponse :
Code:

libGL warning: 3D driver claims to not support visual 0x4b
direct rendering: Yes

c'est quoi le problème? Ton GL fonctionne, oublies l'autre message c'est sans importance, ça tiens de la profondeur d'affichage 24 bit. j'ai le même message et Beryl (et Kiba-dock) sont installés. Et fonctionnent très bien !

Vas-y sans crainte

---

Vive le Québec libre ! Quoi qu'en dise le clown Sarkosy, ami du  milliardaire Paul Desmarais, acheteur de politiciens!

paparasta

Re : Problème pour installer beryl

En fait béryl ne fonctionne pas dans mon cas : lorsque je le lance, je perdsles les cadres des fenêtres...