#1 Le 06/01/2007, à 00:07
- emlesna
Un screen shot qui en dit long !!!!
Bonsoir,
Ma config : Edgy/labtop HP + Carte ATI (330M/340M/350M (RS200 IGP)) + pilotes libres radeon.
Au lancement de bery-manager , l'affichage est complètement boulversé
Démonstration ici====>http://chefdecuisinechezvous.teria.org<========
Je poste mon xorg.conf , si quelqu'un voit une anomalie ????
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon 330M/340M/350M (RS200 IGP)"
Driver "ati"
BusID "PCI:1:5:0"
Option "UseFBDev" "true"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
Option "GARTSize" "64"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DPMS"
Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon 330M/340M/350M (RS200 IGP)"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSectionIndicateur de position dans les moteurs de recherche :
http://rankmonitor.webou.net
Hors ligne
#2 Le 06/01/2007, à 00:29
- Woshee
Re : Un screen shot qui en dit long !!!!
D'après la doc:
Pour les cartes ATI, Il y a deux possibilités. Si vous avez de la chance, la solution pilote libre + aiglx fonctionne correctement avec votre carte graphique. Cependant toutes les cartes graphiques ne sont pas compatibles avec aiglx, ou bien les performances ne sont pas forcément au rendez-vous. Dans ce cas il reste la solution pilote propriétaires + xgl.
Je vous conseille donc de tenter d'abord la première solution, si ça ne fonctionne pas ou mal passez à la seconde.
Donc va faire un tour là: http://doc.ubuntu-fr.org/beryl#cartes_ati
Dernière modification par Woshee (Le 06/01/2007, à 00:30)
Devenez parrain Linux ou trouvez quelqu'un pour vous aider près de chez vous:
http://parrains.linux.free.fr/
Hors ligne