[résolu je pense] Est ce que ma carte ATI est bien installée?

slayer03 · Le 13/01/2007, à 20:32

Bonjour,
je me demande si ma carte ATI Radeon 9700 Mobility est bien installée car je trouve que j'ai des affichages lents, pourtant j'ai des scores normaux par rapport à ma carte, mais je ne sais pas comment vérifier si tout fonctionne bien...
Alors si vous pouviez me dire quoi poster pour savoir si tout est bien installé et configuré, en sachant que je n'ai rien touché par rapport à l'installation de Kubuntu 6.10, ce serait sympa. Pour info mon ordi portable est un xbook xb7v2, en gros c'est un CL56, si vous voulez plus d'information dites le moi.

jo@kubuntu-de-jo:~$ glxgears -printfps
libGL warning: 3D driver claims to not support visual 0x4b
8403 frames in 5.0 seconds = 1679.040 FPS
8354 frames in 5.0 seconds = 1670.716 FPS
8359 frames in 5.0 seconds = 1671.778 FPS

Dernière modification par slayer03 (Le 14/01/2007, à 14:41)

rodgersan · Le 14/01/2007, à 04:37

j'ai du souci à me faire (9800pro):

rodgersan@LINUX:~$ glxgears -printfps
2684 frames in 5.0 seconds = 536.506 FPS
2607 frames in 5.0 seconds = 521.353 FPS
2736 frames in 5.0 seconds = 547.157 FPS
2756 frames in 5.0 seconds = 551.151 FPS

tape:

rodgersan@LINUX:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9800 Pro Generic
OpenGL version string: 2.0.6174 (8.31.5)

EDIT: http://forum.ubuntu-fr.org/viewtopic.php?pid=604223

Dernière modification par rodgersan (Le 14/01/2007, à 04:40)

slayer03 · Le 14/01/2007, à 14:40

Après de multiples essais et de restaurations de mon Xorg.conf, je gagne presque 1000 fps, c'est que ça doit bon maintenant, mais ça veut dire que les problèmes viennent de counter strike qui se bloque avec un écran noir après l'image de démarrage, et non de la carte 3D, enfin je pense...

jo@kubuntu-de-jo:~$ glxgears -printfps
libGL warning: 3D driver claims to not support visual 0x4b
13214 frames in 5.0 seconds = 2642.711 FPS
13504 frames in 5.0 seconds = 2700.782 FPS
13380 frames in 5.0 seconds = 2675.926 FPS
13494 frames in 5.0 seconds = 2698.615 FPS
13627 frames in 5.0 seconds = 2725.380 FP

S

Je copie quand même mon xorg.conf si jamais ça sert un jour à quelqu'un :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Device"        "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "HorizScrollDelta"    "0"
    Option        "SHMConfig"     "on"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Driver		"ati"
	BusID        "PCI:1:0:0"
        Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
        Option "AccelDFS"    "1" # mettez à 0 si vous avez une carte AGP
        Option     "AGPMode" "4" # Décommentez si vous avez une carte AGP
#       Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
        Option "GARTSize" "64"
        Option "RingSize" "8"
        Option "BufferSize" "2"
        Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
        Option "ColorTiling" "1"
        Option "EnableDepthMoves" "yes"
        Option "UseFBDev" "false"
        Option "RenderAccel" "true" # Enable the hardware render acceleration
        Option "mtrr" "on"
        Option    "SubPixelOrder" "none"
        Option "DPMS"
        Option "DynamicClocks" "on"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-70
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1400x1050"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
        InputDevice     "Synaptics Touchpad"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "Extensions"
 Option "Composite" "Enable" 
EndSection

Section "DRI"
	Mode	0666
EndSection

rodgersan · Le 14/01/2007, à 22:31

Il me semblait qu'il fallait mettre disable pour le composite...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 13/01/2007, à 20:32

[résolu je pense] Est ce que ma carte ATI est bien installée?

#2 Le 14/01/2007, à 04:37

Re : [résolu je pense] Est ce que ma carte ATI est bien installée?

#3 Le 14/01/2007, à 14:40

Re : [résolu je pense] Est ce que ma carte ATI est bien installée?

#4 Le 14/01/2007, à 22:31

Re : [résolu je pense] Est ce que ma carte ATI est bien installée?

Pied de page des forums