Ubuntu-fr

ihp140

Ubuntu ne veut pas me laisser utiliser ma Clé USB

Bonjour, le problème est le suivant : quand je connecte ma clé usb, il la reconnait tout de suite et il m'affiche ce qu'elle contient . Quand je clique sur un fichier : la fenetre me renvoit à mon dossier utilisateur...:|
Je ne comprend pas pourquoi ça me fait ça...:o
A partir de là, elle disparait du poste de travail et je suis obligé de la reconnecter pour qu'elle répparaisse etc.
( J'ai Ubuntu 6.1)

Dernière modification par ihp140 (Le 22/01/2007, à 14:16)

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

up

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

Voici ce que me donne la commande lspci :

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go 6600] (rev a2)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 10)
06:02.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:02.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:02.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:02.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
06:03.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev f0)
06:08.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

Et voici ce que donne la commande dmesg :

[17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fe80000 (usable)
[17179569.184000]  BIOS-e820: 000000001fe80000 - 000000001fe91000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001fe91000 - 000000001ff00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[17179569.184000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 510MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 130688
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126592 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6e50
[17179569.184000] ACPI: RSDT (v001 PTLTD  Ohlone00 0x06040000  LTP 0x00000000) @ 0x1fe8ae02
[17179569.184000] ACPI: FADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe90e88
[17179569.184000] ACPI: MADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe90efc
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1fe90fd8
[17179569.184000] ACPI: MCFG (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe90f9c
[17179569.184000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20030224) @ 0x1fe8bd18
[17179569.184000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20030224) @ 0x1fe8b686
[17179569.184000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1fe8b241
[17179569.184000] ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1fe8b063
[17179569.184000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x1fe8ae4a
[17179569.184000] ACPI: DSDT (v001 INTEL  ALVISO   0x06040000 INTL 0x20030224) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:13 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sdb2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1729.324 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.044000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.044000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.056000] Memory: 508520k/522752k available (1910k kernel code, 13596k reserved, 1069k data, 308k init, 0k highmem)
[17179570.056000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.136000] Calibrating delay using timer specific routine.. 3461.89 BogoMIPS (lpj=6923791)
[17179570.136000] Security Framework v1.0.0 initialized
[17179570.136000] SELinux:  Disabled at boot.
[17179570.136000] Mount-cache hash table entries: 512
[17179570.136000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179570.136000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179570.136000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.136000] CPU: L2 cache: 2048K
[17179570.136000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[17179570.136000] Checking 'hlt' instruction... OK.
[17179570.152000] SMP alternatives: switching to UP code
[17179570.152000] Freeing SMP alternatives: 16k freed
[17179570.152000] checking if image is initramfs... it is
[17179570.660000] Freeing initrd memory: 5323k freed
[17179570.660000] ACPI: Core revision 20060707
[17179570.672000] ACPI: Looking for DSDT ... not found!
[17179570.676000] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[17179570.676000] Total of 1 processors activated (3461.89 BogoMIPS).
[17179570.676000] ENABLING IO-APIC IRQs
[17179570.676000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.820000] Brought up 1 CPUs
[17179570.820000] migration_cost=0
[17179570.820000] NET: Registered protocol family 16
[17179570.820000] EISA bus registered
[17179570.820000] ACPI: bus type pci registered
[17179570.820000] PCI: Using MMCONFIG
[17179570.820000] Setting up standard PCI resources
[17179570.836000] ACPI: Interpreter enabled
[17179570.836000] ACPI: Using IOAPIC for interrupt routing
[17179570.836000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.836000] PCI: Probing PCI hardware (bus 00)
[17179570.840000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[17179570.840000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[17179570.840000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179570.840000] Boot video device is 0000:01:00.0
[17179570.840000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.840000] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[17179570.840000] Please report the result to linux-kernel to fix this permanently
[17179570.840000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.844000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[17179570.844000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179570.844000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179570.844000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 7 10) *4
[17179570.844000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[17179570.848000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[17179570.848000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179570.848000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[17179570.848000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179570.848000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[17179570.848000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[17179570.848000] ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
[17179570.848000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.848000] pnp: PnP ACPI init
[17179570.852000] pnp: PnP ACPI: found 11 devices
[17179570.852000] PnPBIOS: Disabled by ACPI PNP
[17179570.852000] PCI: Using ACPI for IRQ routing
[17179570.852000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.852000] PCI: Bridge: 0000:00:01.0
[17179570.852000]   IO window: disabled.
[17179570.852000]   MEM window: 90000000-afffffff
[17179570.852000]   PREFETCH window: c0000000-cfffffff
[17179570.852000] PCI: Bridge: 0000:00:1c.0
[17179570.852000]   IO window: 2000-2fff
[17179570.852000]   MEM window: b0000000-b3ffffff
[17179570.852000]   PREFETCH window: d0000000-d3ffffff
[17179570.852000] PCI: Bus 7, cardbus bridge: 0000:06:02.0
[17179570.852000]   IO window: 00003000-000030ff
[17179570.852000]   IO window: 00003400-000034ff
[17179570.852000]   PREFETCH window: 30000000-31ffffff
[17179570.852000]   MEM window: 32000000-33ffffff
[17179570.852000] PCI: Bridge: 0000:00:1e.0
[17179570.852000]   IO window: 3000-3fff
[17179570.852000]   MEM window: b4000000-b40fffff
[17179570.852000]   PREFETCH window: 30000000-31ffffff
[17179570.852000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.852000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.852000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179570.852000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.852000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.852000] PCI: Enabling device 0000:06:02.0 (0000 -> 0003)
[17179570.852000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.852000] PCI: Setting latency timer of device 0000:06:02.0 to 64
[17179570.852000] NET: Registered protocol family 2
[17179570.880000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.880000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.880000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.880000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.880000] TCP reno registered
[17179570.880000] Simple Boot Flag at 0x36 set to 0x1
[17179570.880000] audit: initializing netlink socket (disabled)
[17179570.880000] audit(1169484126.880:1): initialized
[17179570.880000] VFS: Disk quotas dquot_6.5.1
[17179570.880000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.880000] Initializing Cryptographic API
[17179570.880000] io scheduler noop registered
[17179570.880000] io scheduler anticipatory registered
[17179570.880000] io scheduler deadline registered
[17179570.880000] io scheduler cfq registered (default)
[17179570.880000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.880000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.880000] assign_interrupt_mode Found MSI capability
[17179570.880000] Allocate Port Service[0000:00:01.0:pcie00]
[17179570.880000] Allocate Port Service[0000:00:01.0:pcie03]
[17179570.880000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179570.880000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.880000] assign_interrupt_mode Found MSI capability
[17179570.880000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179570.880000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179570.880000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179570.880000] isapnp: Scanning for PnP cards...
[17179571.448000] isapnp: No Plug & Play device found
[17179571.468000] Real Time Clock Driver v1.12ac
[17179571.468000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.468000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.468000] mice: PS/2 mouse device common for all mice
[17179571.468000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.468000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.468000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.468000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.472000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.476000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.476000] EISA: Probing bus 0 at eisa.0
[17179571.476000] Cannot allocate resource for EISA slot 1
[17179571.476000] Cannot allocate resource for EISA slot 2
[17179571.476000] Cannot allocate resource for EISA slot 3
[17179571.476000] EISA: Detected 0 cards.
[17179571.476000] TCP bic registered
[17179571.476000] NET: Registered protocol family 1
[17179571.476000] NET: Registered protocol family 8
[17179571.476000] NET: Registered protocol family 20
[17179571.476000] Using IPI No-Shortcut mode
[17179571.476000] ACPI: (supports S0 S3 S4 S5)
[17179571.476000] Freeing unused kernel memory: 308k freed
[17179571.508000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.656000] Capability LSM initialized
[17179572.680000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.680000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179572.680000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179572.680000] ACPI: Getting cpuindex for acpiid 0x1
[17179572.932000] SCSI subsystem initialized
[17179572.932000] libata version 1.20 loaded.
[17179572.936000] ahci 0000:00:1f.2: version 1.2
[17179572.936000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 209
[17179572.936000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[17179572.936000] ahci: probe of 0000:00:1f.2 failed with error -12
[17179572.936000] ata_piix 0000:00:1f.2: version 1.05
[17179572.936000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 209
[17179572.936000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179572.936000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1870 irq 14
[17179573.100000] ata1: dev 0 cfg 49:0f00 82:746b 83:7fe9 84:4023 85:f469 86:3d49 87:4023 88:203f
[17179573.100000] ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48
[17179573.100000] ata1(0): applying bridge limits
[17179573.108000] ata1: dev 0 configured for UDMA/100
[17179573.108000] scsi0 : ata_piix
[17179573.108000]   Vendor: ATA       Model: HTS541080G9AT00   Rev: MB4O
[17179573.108000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179573.108000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1878 irq 15
[17179573.428000] ata2: dev 0 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
[17179573.428000] ata2: dev 0 ATAPI, max UDMA/33
[17179573.428000] ata2(0): applying bridge limits
[17179573.592000] ata2: dev 0 configured for UDMA/33
[17179573.592000] scsi1 : ata_piix
[17179573.596000]   Vendor: HL-DT-ST  Model: DVDRAM GMA-4080N  Rev: 0L33
[17179573.596000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[17179573.612000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179573.612000] sda: Write Protect is off
[17179573.612000] sda: Mode Sense: 00 3a 00 00
[17179573.612000] SCSI device sda: drive cache: write back
[17179573.612000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179573.612000] sda: Write Protect is off
[17179573.612000] sda: Mode Sense: 00 3a 00 00
[17179573.612000] SCSI device sda: drive cache: write back
[17179573.612000]  sda: sda1 sda2 < sda5 sda6 >
[17179574.036000] sd 0:0:0:0: Attached scsi disk sda
[17179574.452000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179574.452000] ide0: ports already in use, skipping probe
[17179574.452000] ide1: I/O resource 0x170-0x177 not free.
[17179574.452000] ide1: ports already in use, skipping probe
[17179574.480000] usbcore: registered new driver usbfs
[17179574.480000] usbcore: registered new driver hub
[17179574.480000] USB Universal Host Controller Interface driver v3.0
[17179574.484000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
[17179574.484000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179574.484000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179574.484000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179574.484000] uhci_hcd 0000:00:1d.0: irq 217, io base 0x00001800
[17179574.484000] usb usb1: configuration #1 chosen from 1 choice
[17179574.484000] hub 1-0:1.0: USB hub found
[17179574.484000] hub 1-0:1.0: 2 ports detected
[17179574.540000] ieee1394: Initialized config rom entry `ip1394'
[17179574.588000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 209
[17179574.588000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179574.588000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179574.588000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179574.588000] uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001820
[17179574.588000] usb usb2: configuration #1 chosen from 1 choice
[17179574.588000] hub 2-0:1.0: USB hub found
[17179574.588000] hub 2-0:1.0: 2 ports detected
[17179574.692000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
[17179574.692000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179574.692000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179574.692000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179574.692000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x00001840
[17179574.692000] usb usb3: configuration #1 chosen from 1 choice
[17179574.692000] hub 3-0:1.0: USB hub found
[17179574.692000] hub 3-0:1.0: 2 ports detected
[17179574.796000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
[17179574.796000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179574.796000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179574.796000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179574.796000] ehci_hcd 0000:00:1d.7: debug port 1
[17179574.796000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179574.796000] ehci_hcd 0000:00:1d.7: irq 217, io mem 0x80004000
[17179574.800000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179574.800000] usb usb4: configuration #1 chosen from 1 choice
[17179574.800000] hub 4-0:1.0: USB hub found
[17179574.800000] hub 4-0:1.0: 6 ports detected
[17179574.828000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179574.904000] ACPI: PCI Interrupt 0000:06:02.2[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.952000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[b4006000-b40067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179575.600000] usb 4-3: new high speed USB device using ehci_hcd and address 3
[17179575.748000] usb 4-3: configuration #1 chosen from 1 choice
[17179575.932000] usbcore: registered new driver libusual
[17179575.936000] Initializing USB Mass Storage driver...
[17179576.172000] usb 1-1: new full speed USB device using uhci_hcd and address 3
[17179576.224000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0003252140004d82]
[17179576.340000] usb 1-1: configuration #1 chosen from 1 choice
[17179576.592000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[17179576.772000] usb 2-2: configuration #1 chosen from 1 choice
[17179576.776000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179576.776000] usb-storage: device found at 3
[17179576.776000] usb-storage: waiting for device to settle before scanning
[17179576.776000] usbcore: registered new driver usb-storage
[17179576.776000] USB Mass Storage support registered.
[17179576.784000] usbcore: registered new driver hiddev
[17179576.800000] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input1
[17179576.800000] input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.1-2
[17179576.800000] usbcore: registered new driver usbhid
[17179576.800000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179581.776000] usb-storage: device scan complete
[17179581.808000]   Vendor: Maxtor    Model: 3200              Rev: 0342
[17179581.808000]   Type:   Direct-Access                      ANSI SCSI revision: 04
[17179581.812000] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
[17179581.812000] sdb: Write Protect is off
[17179581.812000] sdb: Mode Sense: 17 00 00 00
[17179581.812000] sdb: assuming drive cache: write through
[17179581.812000] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
[17179581.812000] sdb: Write Protect is off
[17179581.812000] sdb: Mode Sense: 17 00 00 00
[17179581.812000] sdb: assuming drive cache: write through
[17179581.812000]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[17179581.832000] sd 2:0:0:0: Attached scsi disk sdb
[17179582.032000] kjournald starting.  Commit interval 5 seconds
[17179582.032000] EXT3-fs: mounted filesystem with ordered data mode.
[17179588.072000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.156000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.292000] irda_init()
[17179588.292000] NET: Registered protocol family 23
[17179588.724000] parport: PnPBIOS parport detected.
[17179588.724000] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[17179588.872000] hw_random: RNG not detected
[17179589.044000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.132000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.132000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179589.132000] sky2 v1.6.1 addr 0xb0000000 irq 169 Yukon-FE (0xb7) rev 1
[17179589.132000] sky2 eth0: addr 00:03:25:16:95:4a
[17179589.148000] agpgart: Detected an Intel 915GM Chipset.
[17179589.168000] agpgart: AGP aperture is 256M @ 0x0
[17179589.600000] nvidia: module license 'NVIDIA' taints kernel.
[17179589.880000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.880000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179589.880000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  9 17:38:10 PST 2006
[17179589.944000] sky2 eth1: enabling interface
[17179589.948000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179589.948000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[17179589.948000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[17179589.972000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.972000] Yenta: CardBus bridge found at 0000:06:02.0 [161f:203d]
[17179589.972000] Yenta: Enabling burst memory read transactions
[17179589.972000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179589.972000] Yenta: Routing CardBus interrupts to PCI
[17179589.972000] Yenta TI: socket 0000:06:02.0, mfunc 0x00a01002, devctl 0x64
[17179590.000000] ts: Compaq touchscreen protocol output
[17179590.076000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[17179590.076000] Uniform CD-ROM driver Revision: 3.20
[17179590.076000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[17179590.124000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179590.124000] sdhci: Copyright(c) Pierre Ossman
[17179590.204000] Yenta: ISA IRQ mask 0x0cd8, PCI irq 169
[17179590.204000] Socket status: 30000006
[17179590.204000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[17179590.204000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179590.204000] cs: IO port probe 0x3000-0x3fff: clean.
[17179590.204000] pcmcia: parent PCI bridge Memory window: 0xb4000000 - 0xb40fffff
[17179590.204000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[17179590.204000] eth0: register 'cdc_ether' at usb-0000:00:1d.0-1, CDC Ethernet Device, 00:11:e3:46:52:7d
[17179590.204000] usbcore: registered new driver cdc_ether
[17179590.204000] ACPI: PCI Interrupt 0000:06:02.3[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.204000] sdhci: SDHCI controller found at 0000:06:02.4 [104c:8034] (rev 0)
[17179590.204000] ACPI: PCI Interrupt 0000:06:02.4[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.204000] mmc0: SDHCI at 0xb4007000 irq 169 DMA
[17179590.204000] mmc1: SDHCI at 0xb4006c00 irq 169 DMA
[17179590.204000] mmc2: SDHCI at 0xb4006800 irq 169 DMA
[17179590.212000] Linux video capture interface: v1.00
[17179590.252000] ieee80211_crypt: registered algorithm 'NULL'
[17179590.256000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179590.256000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179590.400000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
[17179590.400000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179590.400000] Driver 'ipw2200' needs updating - please use bus_type methods
[17179590.400000] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 50
[17179590.400000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[17179590.480000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[17179590.492000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179590.624000] ipw2200: Radio Frequency Kill Switch is On:
[17179590.624000] Kill switch must be turned off for wireless networking to work.
[17179590.624000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[17179590.624000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 209
[17179590.624000] saa7133[0]: found at 0000:06:03.0, rev: 240, irq: 209, latency: 132, mmio: 0xb4007800
[17179590.624000] saa7133[0]: subsystem: 5168:1212, board: UNKNOWN/GENERIC [card=0,autodetected]
[17179590.624000] saa7133[0]: board init: gpio is 10400
[17179590.632000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.632000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179590.636000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179590.760000] saa7133[0]: i2c eeprom 00: 68 51 12 12 10 28 ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179590.760000] saa7133[0]: registered device video0 [v4l2]
[17179590.760000] saa7133[0]: registered device vbi0
[17179590.768000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
[17179590.772000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[17179590.772000] cs: IO port probe 0x820-0x8ff: clean.
[17179590.772000] cs: IO port probe 0xc00-0xcf7: clean.
[17179590.772000] cs: IO port probe 0xa00-0xaff: clean.
[17179590.784000] saa7134 ALSA driver for DMA sound loaded
[17179590.784000] saa7133[0]/alsa: saa7133[0] at 0xb4007800 irq 209 registered as card -1
[17179590.984000] NET: Registered protocol family 17
[17179591.564000] lp0: using parport0 (interrupt-driven).
[17179591.584000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179591.584000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179591.612000] Adding 1028088k swap on /dev/disk/by-uuid/79ffdace-2f83-4e6f-8d07-2d73f5b51c53.  Priority:-1 extents:1 across:1028088k
[17179592.044000] EXT3 FS on sdb2, internal journal
[17179592.232000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179592.272000] NTFS volume version 3.1.
[17179592.316000] NTFS volume version 3.1.
[17179592.348000] NTFS volume version 3.1.
[17179595.336000] ACPI: AC Adapter [AC] (on-line)
[17179595.368000] ACPI: Battery Slot [BAT0] (battery absent)
[17179595.384000] ACPI: Power Button (FF) [PWRF]
[17179595.384000] ACPI: Lid Switch [LID0]
[17179595.384000] ACPI: Power Button (CM) [PWRB]
[17179595.464000] NET: Registered protocol family 10
[17179595.464000] lo: Disabled Privacy Extensions
[17179595.464000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179595.464000] ADDRCONF(NETDEV_UP): eth2: link is not ready
[17179595.464000] IPv6 over IPv4 tunneling driver
[17179595.532000] ibm_acpi: ec object not found
[17179595.560000] pcc_acpi: loading...
[17179599.512000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179599.512000] apm: overridden by ACPI.
[17179606.396000] eth0: no IPv6 routers present
[17179617.964000] NTFS-fs warning (device sdb1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17179618.352000] NTFS volume version 3.1.

EDIT : Utilise les balises [ Code ], merci.

Dernière modification par michel2652 (Le 26/01/2007, à 16:52)

xens

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

ta clef usb est formatée en NTFS ? je te demande ça pars que je vois à la fin de ton dmesg qu'il t'insulte à propos de sdb1...

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

En fait j'ai installé linux sur un disque dure externe de 500 Go : 20 Go sont alloués pour linux et le reste est au format ntfs (il y a mes films, ma musique, mes photos etc). sdb1 correspond à cette patition ntfs.
De plus quand j'ai tapé ces commandes je n'avais pas connecté ma clé usb.

Une fois connectée , lspci me donne :

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go 6600] (rev a2)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 10)
06:02.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:02.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:02.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:02.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
06:03.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev f0)
06:08.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

et dmesg me donne :

[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sdb2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1729.324 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.044000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.044000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.056000] Memory: 508520k/522752k available (1910k kernel code, 13596k reserved, 1069k data, 308k init, 0k highmem)
[17179570.056000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.136000] Calibrating delay using timer specific routine.. 3461.89 BogoMIPS (lpj=6923791)
[17179570.136000] Security Framework v1.0.0 initialized
[17179570.136000] SELinux:  Disabled at boot.
[17179570.136000] Mount-cache hash table entries: 512
[17179570.136000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179570.136000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179570.136000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.136000] CPU: L2 cache: 2048K
[17179570.136000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[17179570.13600

Dernière modification par ihp140 (Le 26/01/2007, à 19:42)

xens

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

Salut, ouvres gparted et donnes nous les nom de tes partitions:

sdc = ???

Si tu va en ligne de commande sur ta clef usb ? et que tu essaie de copier un fichier dessus ? qu'obtiens-tu ?

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

sda1,sda2,sda5,sda6 >> ntfs : ce sont les partitions de mon ordiportable (partion pour windows)

sdb3>> extended ; sdb5: swap linux ; sdb2 : ext3 , sdb1 :ntfs (je l'ai appelé CESAR)

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

Et pourquoi est ce qu'il reconnait ma PSP parcontre ? Une clé USB serait elle plus difficile à reconnaitre qu'une PSP??!!!!

Dernière modification par ihp140 (Le 26/01/2007, à 16:19)

traaf

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

tu veux pas utiliser les balises [ code ]

---

Vault106, musique libre, enjoy it /!\

Mornagest

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

Grmbl... pas moyen d'éditer en plus, sinon je perds la fin du message.

Essaie d'y penser pour la suite, Ihp 140

Sinon pour les ports USB, essaie plutôt lsusb

---

N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB

pardon j'ai mal utilisé la balise : je l'avais mise au début mais pas à la fin.. ^^'

ihp140

Re : Ubuntu ne veut pas me laisser utiliser ma Clé USB