[a moitié résolu] Ati et fglrx : perte de l'accélération graphique

yleetiny · Le 30/01/2007, à 16:32

Bonjour, j'ai un soucis récent avec ma carte graphique : avant tout allait bien et depuis quelque temps mes videos étaient très lente: je regarde pourquoi : j'ai perdu mon accélération graphique.
Je pense que mon problème existe depuis quelque semaines, un xorg.conf mal reconfiguré ou une mise à jour insolite.
Bon voici les extraits de mes logs (/var/log/Xorg.0.log):

-Pour les warnings :

	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx(0): Failed to open DRM connection
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(WW) fglrx(0): Failed to set up write-combining range (0xd7000000,0xfe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd6000000,0x1fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd4000000,0x3fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd0000000,0x7fe0000)

-pour les erreurs :

	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) fglrx(0): DRIScreenInit failed!
(EE) AIGLX: Screen 0 is not DRI capable
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom

-et enfin le plus important, mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon X700 SE (RV410)"
	Driver		"fglrx"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	30-90
	VertRefresh	50-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon X700 SE (RV410)"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1680x1050" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1680x1050" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1680x1050" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1680x1050" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1680x1050" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1680x1050" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
 Option "Composite" "disable"
EndSection

Bon au vu du warning, ce serait peut etre le bus de ma carte graphique qui est mal paramétré?
Enfin, j'ai jamais trop su ce que c'était.
Quelqu'un peut-il m'aider?

Merci d'avance

Dernière modification par yleetiny (Le 01/02/2007, à 19:10)

yleetiny · Le 30/01/2007, à 18:50

résolu à partir du lien suivant

http://forum.ubuntu-fr.org/viewtopic.php?id=76896

qui en fait, réinstalle l'ancienne version du driver

Par contre si quelqu'un saurait comment résoudre mon problème de facon plus propre, n'hésitez pas a poster, svp

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 30/01/2007, à 16:32

[a moitié résolu] Ati et fglrx : perte de l'accélération graphique

#2 Le 30/01/2007, à 18:50

Re : [a moitié résolu] Ati et fglrx : perte de l'accélération graphique

Pied de page des forums