Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 22/06/2012, à 13:17

Christophe apprend Linux

[RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

bonjour à tous,

Voici une fois de plus un problème récurent qui est une nouvelle soumis à la communauté.

Mais après avoir fait plusieurs essais de réglage et écumé les post sur le forum rien y fait !

alors au secours !!!!

J'ai donc 12.04 LTS. pour être certain que cela ne venait pas de ça, j'ai installé les éléments samba (GADMIND et SAMBA).
Mais rien y à fait.

J'arrive à voir, a partir de mon Ubuntu, tous les fichiers partagés de mon WIN 7 et à y accéder sans limitation. Mais sous mon WIN 7 je ne voit même pas Ubuntu alors qu'il y a des dossiers en partage dessus.

Mon réseau est simplement composé de 2 ordi. 1 sous win 7 et le portable sous Ubuntu le tout lié par ma freebox.
J'ai installé sous Win 7 les ervice UNIX et NFS.

Si quelqu'un à une idée pour me dépatouiller ça serai super sympas.
merci à tous.

Dernière modification par Christophe apprend Linux (Le 01/07/2012, à 12:19)


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#2 Le 22/06/2012, à 17:10

Aurel05

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Salut :
Je pense à deux pistes :
-le système de fichier W7 ne reconnaît pas l'est4 mad contrairement à Linux qui reconnaît quasiment tout. Il faudrait créer un partition d'échange en FAT ou en NTFS. OU utiliser un logiciel dédié pour W7
-Les fichiers peuvent-ils être lus ? Sinon dans terminal :

sudo chmod -r +r /nom/du/dossier 

Ce qui donnera la permission de lecture pour tous les fichiers du dossier. (plus de détail ici )
Salut
Aurél

Dernière modification par Aurel05 (Le 22/06/2012, à 17:12)

Hors ligne

#3 Le 22/06/2012, à 20:51

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

bonsoir,

je souhaiterais ne pas avoir à passer par une partition intermédiaire. En effet, avec une version Ubuntu cela ne posait aucun problème et même sans installation de Samba.

Donc je ne vois pas pourquoi il n y aurait avec la 12.04 LTS aucune solution pour cet accès disk ext 4 par un ordinateur sous win 7 à travers un réseau local.

J'ai quant même vérifier si les fichiers et répertoire étaient bien accessible et qu'il n y a pas de problème de propriété et de permission, tout est bon de ce coté.

Je viens faire l essaie en installation des drivers et programme sur Win 7 lui permettant d'écrire et de lite les partition Linux, mais rien y fait.
Ce qui ne m'étonne pas puisque L'ordinateur sous Ubuntu n’apparaît même pas.

quelqu'un aurait une autre idée ?

Merci à tous

Dernière modification par Christophe apprend Linux (Le 23/06/2012, à 13:20)


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#4 Le 22/06/2012, à 20:59

PPdM

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Tu peux préciser, tu veux voir un dossier partagé
sur Linux depuis Ubuntu?

Dernière modification par pierguiard (Le 22/06/2012, à 21:00)


La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#5 Le 23/06/2012, à 13:17

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

bonjour,

En fait je souhaite tout simplement accéder librement (écriture et lecture) aux dossiers qui sont partagés sur mon ordinateur Ubuntu.

Cet accès devant se faire à travers un réseau local sur un ordinateur sous Win 7.

merci de votre aide.


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#6 Le 23/06/2012, à 13:51

PPdM

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Bon, il n'y a aucun problème tout est la


La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#7 Le 23/06/2012, à 16:16

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

merci pierguiard pour ton aide.

j'avais déjà pris connaissance et appliqué les infos sur la page que tu me communique.

mais malheureusement comme tu peux le voir , je rencontre des problèmes.

merci


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#8 Le 23/06/2012, à 18:34

PPdM

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Quel souci as tu exactement?
Copie d’écran ou message exact stp.


La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#9 Le 24/06/2012, à 11:49

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

bonjour pierguiard,

J'ai pas plus éléments que mon premier post. Car en fait la situation reste assez simple.

Je ne sais pas ce que tu as besoin de plus !

merci à tous
Christophe.


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#10 Le 27/06/2012, à 19:27

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Bonsoir à tous,

Je ne pensais que ce genre de problème allait laisser de marbre la communauté.

S'il me paraît difficile pour mon niveau, je le pensais pas aussi complexe au point de coller les meilleurs d'entre vous.

Peut être vous manque t il des infos ou précisions ?
Si c'est le cas n hésitez pas à me demander, mais il me semblais avoir été concis dans mon premier post d'exposé.

salutations.


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#11 Le 27/06/2012, à 19:36

Korak

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Bonjour,

Christophe apprend Linux a écrit :

Donc je ne vois pas pourquoi il n y aurait avec la 12.04 LTS aucune solution pour cet accès disk ext 4 par un ordinateur sous win 7 à travers un réseau local.

Ça fait des années que j'utilise des dossiers partagés aussi bien sous Windows que sous Ubuntu.

Peux-tu préciser ton problème? Entre autre, que se passe-t-il quand tu tentes d'accéder à un dossier partagé sur un PC sous Windows depuis Ubuntu?

Dernière modification par Korak (Le 27/06/2012, à 19:37)


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#12 Le 27/06/2012, à 19:52

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Bonsoir Korak,

En fait quand je suis sur mon ordi Ubuntu, J’accède très bien au dossier partagé de mon ordi sous Win 7. J'y accède en parcourant le réseau.
Je précise que cela fonctionne avec les interfaces : Unity, Gnome et LDXE.

En revanche lorsque je me mets sur l'ordi Win 7 et que je parcours le réseau, je ne vois que l'ordi Win 7 et ses dossiers partagés. MAis je ne vois pas l'ordi Ubuntu et donc encore moins ses dossiers partagés !

Je précise que les 2 ordi sont en réseau local avec une Freebox comme routeur. Les accès internet fonctionnent parfaitement bien sur chacun des 2 ordi. Le nom de domaine est alphabétique en majuscule, est bien identique sur les 2 ordi et ne comporte aucun caractère accentué, espace ou signe particulier.

Le nom des ordi sont en caractères alphabétiques et ne comportent, comme pour le nom de domaine, aucun caractère susceptible de poser problème.

Voila j'espère que cela pourra d'aider à m'aider !

merci

Dernière modification par Christophe apprend Linux (Le 27/06/2012, à 19:54)


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#13 Le 27/06/2012, à 20:12

Korak

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Christophe apprend Linux a écrit :

lorsque je me mets sur l'ordi Win 7 et que je parcours le réseau, je ne vois que l'ordi Win 7 et ses dossiers partagés. MAis je ne vois pas l'ordi Ubuntu et donc encore moins ses dossiers partagés !

Si tu n'as pas créé et partagé un nouveau dossier sous Ubuntu (de préférence dans ton dossier personnel), c'est normal.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#14 Le 27/06/2012, à 20:24

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

En fait j'ai mis en partage sur Ubuntu mes dossiers personnel : images, documents, téléchargement, vidéo et musique.

Et lors de la première mise en partage du premier dossier, naturellement Ubuntu à télécharger les compléments manquants pour Samba.



C'est pour cette raison que je ne comprends vraiment pas pourquoi çela ne fonctionne pas !! Il me semblais avoir tout fait dans les régles !!


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#15 Le 27/06/2012, à 20:50

Korak

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Christophe apprend Linux a écrit :

En fait j'ai mis en partage sur Ubuntu mes dossiers personnel : images, documents, téléchargement, vidéo et musique.!

Un par un ou bien tu as mit en partage ton dossier personnel?


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#16 Le 27/06/2012, à 20:53

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

J'ai fait le partage des dossiers un par un.


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#17 Le 27/06/2012, à 20:59

Korak

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Ben là, je bloque.

Sur mes PC, ça a toujours fonctionné du premier coup.

Désolé, je ne sais plus quoi te dire pour te dépanner.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#18 Le 27/06/2012, à 20:59

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Merci pour ton aide


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#19 Le 28/06/2012, à 09:23

Mathieu147

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Normalement ce n'est pas compliqué et ça doit fonctionner facilement. Ce qui est bizarre c'est que l'ordinateur Ubuntu n'apparaît pas du tout dans le voisinage réseau de l'ordinateur Windows. Peut-être Samba est-il mal configuré? Normalement gsambad n'est pas indispensable, peut-être son installation a-t-elle endommagé le fichier de configuration de samba?

Qu'est-ce que tu as dans ton fichier /etc/samba/smb.conf ?


Pffff…

Hors ligne

#20 Le 28/06/2012, à 11:03

jplemoine

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

j'ai peut-être une piste valable :

Je n'ai pas d'Ubuntu sous les yeux. Donc, je vais la jouer "de mémoire".
Sous Ubuntu, tu fais un clic-droit et dans le menu, tu sélectionnes "Partager"
Là, il y a 2 cases à cocher :
- une pour donner les droits à n'importe quel utilisateur
- une pour donner les droits d'écriture.
Je ne sais pas le faire en ligne de commande.

Je pense que si la première n'est pas cochée, Windows n'a pas les droits de voir le partage et donc considère qu'il n'y a pas de partage. Ne voyant aucun partage, l'ordinateur sous Ubuntu n'apparait pas.

Cordialement,

Jean-Philippe


Membre de l'ALDIL (Association Lyonnaise pour le Développement de l'Informatique Libre)
- En pro, après 20 ans de développement, administrateur Linux / Unix depuis Avril 2019.
- En privé, sous Ubuntu-Xubuntu depuis 2009.

Hors ligne

#21 Le 28/06/2012, à 19:57

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

bonsoir, je viens de vérifier concernant les options de partage des dossiers partagés sur Ubuntu et tout est ok.

voici une copie de samba.conf

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = CHRISTOPHEVAL

# server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
    log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
    max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
    syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
;    encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;    passdb backend = tdbsam

    obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
    unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
    pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
    map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;    printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;    usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
    usershare allow guests = yes
    username map = /etc/samba/smbusers
    security = user
;    guest ok = no
;    guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each 
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
;    guest ok = no
;    read only = yes
    create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
;    browseable = yes
;    read only = yes
;    guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

Merci pour ton aide


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne

#22 Le 28/06/2012, à 23:25

T.A.I.NAUTE

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

salut,
...aucune piste n'est à écartée= vérifie que l'heure de tes stations soit bien sur le même fuseau horaire, il peut arriver ce genre de problèmes entre deux systèmes Windows parfois, alors pourquoi pas dans ta config.

Hors ligne

#23 Le 29/06/2012, à 07:20

Mathieu147

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Voici mon fichier si ça t'intéresse :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each 
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

Tu peux utiliser Meld pour voir les différences entre les deux.

Mais à mon avis, si tu enlèves ou commentes les lignes 241 et 242:

    username map = /etc/samba/smbusers
    security = user

ça pourrait fonctionner. On voit bien que ces lignes commencent par 4 espaces alors que les autres lignes du fichier commencent par une tabulation. C'est bien la preuve que tu les as modifiées à la main ou bien que c'est un logiciel qui l'a fait.


Pffff…

Hors ligne

#24 Le 29/06/2012, à 07:26

Nasman

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

Autre piste : le masque de sous réseau.
Si le masque de sous réseau de Windows est plus restrictif que celui d'ubuntu, peut être que Windows ne voit pas ubuntu du point de vue d'un simple ping.


PC fixe sous Bionic 64 bits et portable avec Focal 64 bits

Hors ligne

#25 Le 29/06/2012, à 21:59

Christophe apprend Linux

Re : [RESOLU] buntu 12.04 LTS accede à Win 7 mais win 7 voit pas ubuntu

bonsoir à tous,

je regarde ça pendant le week-end et je reviens vous donner les résultats.

merci


Ancien Windowsien 7 repentis !!
J'ai choisi de faire mes premiers pas dans le monde de Tux avec Ubuntu 10.04 64bits. J'ai un ordinateur portable Toshiba QOSMIO G40 64bits double coeurs.
Merci d'avance pour vos réponses et votre aide.

Hors ligne