Ubuntu-fr

Phoen1x

Accélèration graphique

Donc j'ai installé les drivers proprietaire pour ma carte Ati X1800GTO

http://doc.ubuntu-fr.org/materiel/ati_proprietaire

les commandes
glxgears ou fgl_glxgears et  glxinfo | grep render fonctionnait

j'ai ensuite installé beryl mais il m'a fallu installer XGL.

Une fois que beryl a fonctionné, les commandes

phoenix@MGD:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
Error: couldn't get fbconfig
phoenix@MGD:~$ glxinfo | grep render
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
direct rendering: No
    GLX_ATI_pixel_format_float, GLX_ATI_render_texture
OpenGL renderer string: Radeon X1800 Series Generic

Voici mon xorg.conf

Section "Extensions"
 Option "Composite" "disable"
EndSection

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "ServerFlags"
	Option	    "AIGLX" "off"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "be"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Acer AL1916W"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. ATI Default Card"
	Driver      "vesa"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. ATI Default Card"
	Monitor    "Acer AL1916W"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "disable"
EndSection

Merci pour votre aide.

Sephirothh

Re : Accélèration graphique

ça m'interresse aussi car sur ma session gnome ma carte graphique tourne sans prob ac l'accélération 3D mais pas sur ma session xgl pourquoi??? Et j'ai exactement le meme message d'erreur sauf que moi c'est ac une ATI x700
voila merci d'avance

---

viva linux

Phoen1x

Re : Accélèration graphique

Oui je confirme les dires de sephirothh, sous la session gnome, tout fonctionne parfaitement.

Merci pour votre aide

Sephirothh

Re : Accélèration graphique

Est t-il possible qu'il faille changer les options de Xsession???
merci de nous répondre

---

viva linux

FJ

Re : Accélèration graphique

Salut !

Pareil pour moi, sous gnome aucun soucis et sous xgl, quand je tape :

romain@FJ-Linux:~$ fgl_glxgears 
Using GLX_SGIX_pbuffer
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
Error: couldn't get fbconfig

et quand je fais "glxgears", les engrenages s'affichent mais sont hyper lents et j'obtient en fermant la fenetre :

romain@FJ-Linux:~$ glxgears 
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
X connection to :1.0 broken (explicit kill or server shutdown).

Voilà mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon Xpress 200M (RC410)"
	Driver      "ati"
	BusID       "PCI:1:5:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon Xpress 200M (RC410)"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x800"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	   "Composite" "disable"
EndSection

Si quelqu'un a des idées ?
Merci de vos réponses
++

EDIT : probleme résolu  :en fait apparemment, c'est normal qu'il y ait le message de Xlib, j'ai donc démarrer beryl avec "beryl-xgl --use-copy" et ca marche.

Dernière modification par FJ (Le 02/03/2007, à 08:52)

Phoen1x

Re : Accélèration graphique

tu peux expliquer ta manipulation plus en détail ? car je comprends pas ce que tu entends par démarrer beryl avec "beryl-xgl --use-copy"

FJ

Re : Accélèration graphique

En fait, tu démarre ta session XGL normalement.
Ensuite tu ouvre un terminal et là tu tapes :

beryl-manager --use-copy

Normalement ca doit démarrer beryl (le diamand dans la barre des taches) et si ya pas d'écran tout blanc qui intervient, c'est bon. Pour vérifier le mode "copy", tu cliques droit sur le diamand, ensuite il y a un truc "type de rendu" je crois et là "copy" devrait être coché. J'ai essayé les autres mode mais il n'y a que "copy" qui fait marcher beryl (donc sans ecran blanc )

Voilà, j'espère que ça t'aidera, parce que j'ai longtemps cru à un probleme entre xgl et l'accélération 3D alors que juste --use-copy a règlé mes soucis.

Par contre en parlant d'accélération graphique, quand par exemple je lance un economiseur d'écran en openGL, c'est hyper lent comme si y'avait pas accélération 3D alors que beryl est super fluide... bizarre...

++

Dernière modification par FJ (Le 15/03/2007, à 11:48)

bjames

Re : Accélèration graphique

Suit a de multiple essai de mettre en place beryl avec une ati xpress 200M

voici en fait ce que j ai fait........
1 j ai remi en place le kermel 2.6.20.12 generic (ubuntu feisty gestinnaire de packet)

2 installation normal de fglrx puis xgl (tuto ubuntu)

3 installer beryl 2.0.1  mais la comme la plupar je me suis heurter a quelque probleme (dsl novice)

4 apres plusieur page de lecture sur le net je suis tomber sur cette commande :

---------------LD_PRELOAD=/usr/lib/fglrx/libGL.so.1.2.xlibmesa beryl--------------

5 demarer sur le serveur xgl puis activer beryl (si ça ne fonctionne pas ouvert terminal de commande puis entrer la commande .

6 au cas ou echec editer ---sudo gedit .beryl-managerrc----- puis modifier render_path=0
mettre 2 a la place du 0

voila j espere que cela vous aidera.

Section "Files"
    FontPath    "/usr/share/fonts/X11/misc"
    FontPath    "/usr/share/fonts/X11/cyrillic"
    FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/Type1"
    FontPath    "/usr/share/fonts/X11/100dpi"
    FontPath    "/usr/share/fonts/X11/75dpi"
    # path to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbVariant"    "fr"
    Option        "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "ZAxisMapping"        "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Device"        "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "HorizScrollDelta"    "0"
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "stylus"
    Option        "Device"    "/dev/wacom"    # Change to
                            # /dev/input/event
                            # for USB
    Option        "Type"        "stylus"
    Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "eraser"
    Option        "Device"    "/dev/wacom"    # Change to
                            # /dev/input/event
                            # for USB
    Option        "Type"        "eraser"
    Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "InputDevice"
    Driver        "fglrx"
    Identifier    "cursor"
    Option        "Device"    "/dev/wacom"    # Change to
                            # /dev/input/event
                            # for USB
    Option        "Type"        "cursor"
    Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "Device"
    Identifier    "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
    Driver        "fglrx"
    BusID        "PCI:1:5:0"
EndSection

Section "Monitor"
    Identifier    "Generic Monitor"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x800"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice     "stylus"    "SendCoreEvents"
    InputDevice     "cursor"    "SendCoreEvents"
    InputDevice     "eraser"    "SendCoreEvents"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "DRI"
    Mode    0666
EndSection

Section "Extensions"
    Option "Composite" "disable"
EndSection

pour ma par cela fonctionne (mais je sais que beryl a des probleme)

petit dicton :

qui s attend au pire n est jamais déçu  .........