Ubuntu-fr

mathojojo

wacom VOLITO2

Bonjour,

Je possède la tablette volito2, et je suis sous Dapper. Mon problème, c'est que la surface de ma tablette ne correspond pas toujours à la surface de l'écran. Je crois que c'est ce qu'on appelle le mode absolu.
C'est un peu embettant, car je suis obligé de brasser de gauche à droite, ou de haut en bas plusieurs fois afin de pouvoir atteindre une zone extreme (le bas, le haut, la droite ou la gauche).

Je pense pourtant avoir configuré mon Xorg correctement, le voici :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option	"Mode" 		"absolute"
  Option	"KeepShape"	"on"
  Option        "Type"          "stylus"
  Option 	"USB" 		"on"
#  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
#  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
#  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
	Driver		"fglrx"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"HM903D/DT"
	Option		"DPMS"
	HorizSync	30-107
	VertRefresh	50-85
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
	Monitor		"HM903D/DT"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Si vous voyez le problème... merci de m'aider ! Moi je sèche.

Merci encore, @+

---

AMD Phenom II X6 1090T RAM DDR3 8Go - ATI HD4850
Kubuntu/Raring Ringtail KDE 4.10

http://situsavaislinux.blogspot.com/

grillon

Re : wacom VOLITO2

salut

Option    "Mode"        "Absolute"

absolute avec A majuscule, ce serait bête mais c'est peut être çà!

sinon ce que je trouve bizarre c'est que  mon lien wacom pointe vers /dev/input/wacom et non /dev/wacom (wacom-tools installé).

Grillon

Dernière modification par grillon (Le 04/03/2007, à 18:44)