Pages : 1
#1 Le 21/07/2012, à 15:09
- joel33
demon gestin des ventilo
bonjour je tourne actuellement sous une antiquité en depannage impossible de mater une video flash : surchauffe. d'autant plus que j'utilise des distros allégées : arch parted magic ou slack pour economiser des performances, probleme, sous ces disribes il manque un demon manifestement de gestion du ventilo :
sous ubuntu le ventilo accelère à la lecture d'une video flash ce qui empeche casiment l'exinction j'entend bien les accelerations/ralentissements
sous parted magic lubuntu slack et pas mal d'autres distrib legeres que jai testés cela fait defaut : le ventilo tourne toujours au minimum des lors une video flash ou plusieurs tache = extinction violente presque instantanement : à s'arracher les chveux
im sensor ne detecte aucune sondes des lors impossible de regler quoi que ce sosit avec ce soft c'est donc bien un deamon par defaut sous kubuntu qui fait la dif avec les autres distribes citées mais lequel ???
Merci
sous xp egalement gestion des ventilo = aucune extinction..
Dernière modification par joel33 (Le 22/07/2012, à 13:25)
Hors ligne
#2 Le 21/07/2012, à 17:17
- Kooothor
Re : demon gestin des ventilo
Salut joel33,
1. Essaie de te relire et de corriger tes fautes. Ta prose est illisible et incompréhensible.
2. Si tu es sous Archlinux : lis ceci : https://wiki.archlinux.org/index.php/Fan_Speed_Control
3. La première chose à régler, c'est que lm-sensors détecte ton ventilo.
@+
~ktr
Hors ligne
#3 Le 22/07/2012, à 19:03
- joel33
Re : demon gestin des ventilo
salut
comme je disais lm_sensors ne m'est d'aucune utilité sur ce pc je vais preciser ça cependant je suis persuadé que sans ce logiciel kubuntu gère à la difference des autres distribes testées le ventilo par defaut je voudrais dès lors savoir avec quoi pour que je puisse transposer ça sur une distribe plus legere.
si kubuntu 30 fois pus lourd que lubuntu, ou ctkarch ne s'etient pas de façon intempestive c'est qu'il refroidi mieux puisque le ventilo adapte NATIVEMENT sa vitesse (je l'entend seulement sous kubuntu accelerer !)
concernant lm_sensors voila le resultat de sensors :
sudo sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +59.0°C (crit = +85.0°C)
temp2: +52.0°C (crit = +77.0°C)
vous me direz ça va les temperature mais ça c'est suelement sous kubuntu d'ou le sujet sous les autres en trois minutes même en faisant rien de particulier le pc s'eteint en surcauffe
ensuite comme je n'ai pas de valeur RPM j'ai tenté le smanipes du lien ça ne donne rien le sensors.conf :
# libsensors configuration file
# -----------------------------
#
# This default configuration file only includes statements which do not
# differ from one mainboard to the next. Only label, compute and set
# statements for internal voltage and temperature sensors are included.
#
# In general, local changes should not be added to this file, but rather
# placed in custom configuration files located in /etc/sensors.d. This
# approach makes further updates much easier.
#
# Such custom configuration files for specific mainboards can be found at
# http://www.lm-sensors.org/wiki/Configurations
#
# It is recommended not to modify this file, but to drop your local
# changes in /etc/sensors.d/. File with names that start with a dot
# are ignored.
set fan1_div 4
chip "lm78*" "lm79-*" "lm80-*"
label temp1 "M/B Temp"
chip "w83792d-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in6 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in6_min 5.0 * 0.90
set in6_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83793-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in7 "+5V"
label in8 "5VSB"
label in9 "Vbat"
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 5.0 * 0.90
set in8_max 5.0 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
chip "via686a-*"
label in0 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
chip "adm1025-*" "ne1619-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp1 "CPU Temp"
label temp2 "M/B Temp"
chip "lm87-*" "adm1024-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
label temp1 "M/B Temp"
label temp2 "CPU Temp"
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in8 "Vbat"
chip "fscpos-*" "fscher-*"
#FSC "Hermes"
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label temp1 "CPU Temp"
label temp2 "M/B Temp"
label temp3 "Aux Temp"
chip "fscscy-*"
#FSC "Scylla"
label in0 "+12V"
label in1 "+5V"
label in2 "+3.3V"
label temp1 "CPU0 Temp"
label temp2 "CPU1 Temp"
label temp3 "M/B Temp"
label temp4 "Aux Temp"
chip "fschds-*"
# Fujitsu Technology Solutions, "Hades"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp2 "Super I/O Temp"
label temp3 "System Temp"
# Fans
label fan1 "PSU Fan"
label fan2 "CPU Fan"
label fan3 "System FAN2"
label fan4 "System FAN3"
label fan5 "System FAN4"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
chip "fscsyl-*"
# Fujitsu Technology Solutions, "Syleus"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp4 "Super I/O Temp"
label temp5 "Northbridge Temp"
# Fans
label fan1 "CPU Fan"
label fan2 "System FAN2"
label fan3 "System FAN3"
label fan4 "System FAN4"
label fan7 "PSU Fan"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label in3 "+3.3V"
label in5 "+3.3V-Aux"
chip "vt1211-*"
label in5 "+3.3V"
label temp2 "SIO Temp"
chip "vt8231-*"
label in5 "+3.3V"
chip "smsc47m192-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
label temp1 "SIO Temp"
chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" "emc6d100-*" "emc6d102-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
chip "pc87365-*" "pc87366-*"
# Voltage inputs
label in7 "3VSB"
label in8 "VDD"
label in9 "Vbat"
label in10 "AVDD"
compute in7 @*2, @/2
compute in8 @*2, @/2
compute in10 @*2, @/2
# These are the operating conditions as recommended by National
# Semiconductor
set in7_min 3.0
set in7_max 3.6
set in8_min 3.0
set in8_max 3.6
set in10_min 3.0
set in10_max 3.6
# Depending on the hardware setup, the battery voltage may or may not
# be monitored.
# set in9_min 2.4
# set in9_max 3.6
label temp3 "SIO Temp"
set temp3_min 0
set temp3_max 70
set temp3_crit 85
chip "adm1030-*" "adm1031-*"
label temp1 "M/B Temp"
chip "w83627ehf-*" "w83627dhg-*"
label in0 "Vcore"
label in2 "AVCC"
label in3 "VCC"
label in7 "3VSB"
label in8 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 3.3 * 0.90
set in3_max 3.3 * 1.10
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "f71805f-*"
label in0 "+3.3V"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
chip "f71872f-*"
label in0 "+3.3V"
label in9 "Vbat"
label in10 "3VSB"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
set in10_min 3.3 * 0.90
set in10_max 3.3 * 1.10
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp2 "Core0 Temp"
label temp3 "Core1 Temp"
label temp4 "Core1 Temp"
chip "dme1737-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch311x-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5027-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "f71882fg-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
chip "f8000-*"
label in0 "+3.3V"
label in1 "3VSB"
label in2 "Vbat"
compute in0 @*2, @/2
compute in1 @*2, @/2
compute in2 @*2, @/2
chip "adt7473-*" "adt7475-*"
label in2 "+3.3V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
label temp2 "Board Temp"
chip "adt7476-*" "adt7490-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your ADT7476 is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"j'ai remplacé la valeur div par 8 16 ou 32 toujours pas de valeur RPM sensor me sort toujours la même chose..
Hors ligne