#1851 Le 23/07/2012, à 21:10
- cdjklm
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Désolé de vous déranger encor il y a un truc que je ne sais pas pour hdmi et pourtant je comprend la traduction c est:trigger a start of the x server with (optirun true) ,declencher le démarrage du server x avec vrai,es ce une ligne à changer dans un fichier si oui lequel car pas indiqué ou une commande?
version 20.04 sur asus n55sf
Hors ligne
#1852 Le 24/07/2012, à 11:22
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Une commande...
Hors ligne
#1853 Le 24/07/2012, à 12:07
- compte supprimé
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Salut !
Depuis le passage de mon portable (asus U35JC) sous xubuntu 12.04, j'ai d'énorme problèmes avec le driver officiel de nvidia et bumblebee.
Problèmes qui semblent réglés depuis que j'utilise le driver nouveau avec bumblebee.
J'ai une question : bumblebee est-il obligatoire pour nouveau ? J'ai lu que les derniers kernels embarquaient un truc qui faisaient le switch automatiquement (PRIME ou quelque chose du genre) : concrètement, qu'en est-il ? Est-ce que ça marche et donc est-ce que je peux me dispenser de bumblebee ?
Seconde question : la commande :
grep rate /proc/acpi/battery/BAT0/stateNe marche pas sous la 12.04. Qu'est-ce qui remplace cette commande ?
Merci beaucoup ! 
Dernière modification par monsieurweller (Le 24/07/2012, à 12:09)
#1854 Le 24/07/2012, à 12:12
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bumblebee ne sera plus obligatoire pour nouveau quand PRIME sera là en effet. Enfin c'est pas tout à fait exact, on en discutait hier, PRIME permet juste d'utiliser les deux cartes, mais pas de gestion énergétique, et pas user-friendly du tout (pire que Bumblebee sur ce point).
Mais pour le moment tu vas encore devoir attendre, car si le support préliminaire est effectivement arrivé dans le noyau 3.5 publié dimanche, il faut utiliser un server X.org compatible, ainsi que des drivers nouveau et intel qui supportent ce système. Et actuellement, ça veut dire tout compiler directement depuis les repo git de David Airlie. Et ce, pour avoir un embryon de projet fonctionnel.
Comme je disais, la conclusion de nos discussions hier, c'était de ne pas s'attendre à voir PRIME pour le grand public avant 13.04 au plus tôt en ce qui concerne Ubuntu.
EDIT : Et pour ta seconde question, j'en sais rien, moi j'utilise toujours ça qui marche en tout cas chez moi :
cat /proc/acpi/battery/BAT0/stateDernière modification par ArchangeGabriel (Le 24/07/2012, à 12:13)
Hors ligne
#1855 Le 24/07/2012, à 12:16
- compte supprimé
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
ArchangeGabriel a écrit :
Bumblebee ne sera plus obligatoire pour nouveau quand PRIME sera là en effet. Enfin c'est pas tout à fait exact, on en discutait hier, PRIME permet juste d'utiliser les deux cartes, mais pas de gestion énergétique, et pas user-friendly du tout (pire que Bumblebee sur ce point).
Mais pour le moment tu vas encore devoir attendre, car si le support préliminaire est effectivement arrivé dans le noyau 3.5 publié dimanche, il faut utiliser un server X.org compatible, ainsi que des drivers nouveau et intel qui supportent ce système. Et actuellement, ça veut dire tout compiler directement depuis les repo git de David Airlie. Et ce, pour avoir un embryon de projet fonctionnel.
Comme je disais, la conclusion de nos discussions hier, c'était de ne pas s'attendre à voir PRIME pour le grand public avant 13.04 au plus tôt en ce qui concerne Ubuntu.
Wouah, merci pour cette réponse à la fois rapide et complète !
Dernière petite question, après, promis, j'arrête d'embêter mon monde :
Glxgears lancé avec optirun me renvoie ce truc (à noter que glxgears marche quand même) :
Error: nConfigOptions (15) does not match the actual number of options in
__driConfigOptions (9).C'est normal ou non ? (à noter que j'utilse le dépôt xorg-edgers pour les drivers vidéo)
#1856 Le 24/07/2012, à 12:19
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
C'est pas normal dans l'absolu, mais c'est normal si tu utilises xorg-edgers. Au passage ça explique pourquoi tu as des problèmes avec le driver proprio, il faut effectuer deux changements pour l'utiliser dans /etc/bumblebee/bumblebee.conf :
1) Changer Driver= par Driver=nvidia
2) Changer KernelDriver=nvidia-current par KernelDriver=nvidia
Ensuite tu redémarres et ça devrait marcher.
Hors ligne
#1857 Le 24/07/2012, à 12:28
- compte supprimé
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
ArchangeGabriel a écrit :
C'est pas normal dans l'absolu, mais c'est normal si tu utilises xorg-edgers. Au passage ça explique pourquoi tu as des problèmes avec le driver proprio, il faut effectuer deux changements pour l'utiliser dans /etc/bumblebee/bumblebee.conf :
1) Changer Driver= par Driver=nvidia
2) Changer KernelDriver=nvidia-current par KernelDriver=nvidia
Ensuite tu redémarres et ça devrait marcher.
Oui, j'avais vu le message de Nepenthes. Mais dans l'absolu ça ne changeait rien : ça bloquait au boot. Avec les drivers nouveau, pas de problèmes (enfin, à condition de rajouter dans /etc/default/grub l'option "nouveau.modeset=1"), et vu l'utilisation (boulot), ça ne me gène pas plus que ça.
En tout cas, le truc de la batterie me chiffone. Je n'ai même pas de dossier "battery" dans /proc/acpi. Pourtant, l'applet de batterie de xubuntu me renvoie bien comme périphérique "battery_BAT0". 
Voici ce que me renvoie dmesg.
[ 0.096293] CPU0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz stepping 05
[ 0.203647] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.203654] CPUID marked event: 'bus cycles' unavailable
[ 0.203656] ... version: 3
[ 0.203657] ... bit width: 48
[ 0.203657] ... generic registers: 4
[ 0.203658] ... value mask: 0000ffffffffffff
[ 0.203659] ... max period: 000000007fffffff
[ 0.203660] ... fixed-purpose events: 3
[ 0.203661] ... event mask: 000000070000000f
[ 0.203863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.203967] Booting Node 0, Processors #1 #2 #3
[ 0.243665] Brought up 4 CPUs
[ 0.243671] Total of 4 processors activated (19728.13 BogoMIPS).
[ 0.246503] devtmpfs: initialized
[ 0.247560] EVM: security.selinux
[ 0.247562] EVM: security.SMACK64
[ 0.247563] EVM: security.capability
[ 0.247607] PM: Registering ACPI NVS region [mem 0xaac41000-0xaac91fff] (331776 bytes)
[ 0.247614] PM: Registering ACPI NVS region [mem 0xaaca3000-0xaacb6fff] (81920 bytes)
[ 0.247624] PM: Registering ACPI NVS region [mem 0xaacc0000-0xaacc7fff] (32768 bytes)
[ 0.247625] PM: Registering ACPI NVS region [mem 0xaace1000-0xaace1fff] (4096 bytes)
[ 0.247626] PM: Registering ACPI NVS region [mem 0xaacf1000-0xaacf4fff] (16384 bytes)
[ 0.247628] PM: Registering ACPI NVS region [mem 0xaacfa000-0xaacfcfff] (12288 bytes)
[ 0.247629] PM: Registering ACPI NVS region [mem 0xaacff000-0xaacfffff] (4096 bytes)
[ 0.247630] PM: Registering ACPI NVS region [mem 0xaad0c000-0xaad19fff] (57344 bytes)
[ 0.247632] PM: Registering ACPI NVS region [mem 0xaad30000-0xaad31fff] (8192 bytes)
[ 0.248386] dummy:
[ 0.248418] RTC time: 9:44:38, date: 07/24/12
[ 0.248453] NET: Registered protocol family 16
[ 0.248607] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.248609] ACPI: bus type pci registered
[ 0.248674] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.248677] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.275145] PCI: Using configuration type 1 for base access
[ 0.275988] bio: create slab <bio-0> at 0
[ 0.276065] ACPI: Added _OSI(Module Device)
[ 0.276067] ACPI: Added _OSI(Processor Device)
[ 0.276069] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.276072] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.278649] ACPI: EC: EC description table is found, configuring boot EC
[ 0.278654] ACPI: EC: Look up EC in DSDT
[ 0.281402] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.285208] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.336509] ACPI: SSDT 00000000aad03918 0042B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.337127] ACPI: Dynamic OEM Table Load:
[ 0.337130] ACPI: SSDT (null) 0042B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.337245] ACPI: SSDT 00000000aad01698 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.337850] ACPI: Dynamic OEM Table Load:
[ 0.337852] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.338105] ACPI: SSDT 00000000aad02a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.338778] ACPI: Dynamic OEM Table Load:
[ 0.338780] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.338895] ACPI: SSDT 00000000aad00d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.339560] ACPI: Dynamic OEM Table Load:
[ 0.339562] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.340108] ACPI: Interpreter enabled
[ 0.340113] ACPI: (supports S0 S3 S4 S5)
[ 0.340134] ACPI: Using IOAPIC for interrupt routing
[ 0.451615] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.451882] ACPI: No dock devices found.
[ 0.451886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.452310] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.452772] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.452774] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.452776] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.452778] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.452780] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.452781] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.452783] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.452785] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfeafffff]
[ 0.452813] PCI host bridge to bus 0000:00
[ 0.452816] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.452818] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.452819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.452821] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.452823] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.452824] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.452826] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.452828] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
[ 0.452837] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.452855] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.452876] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.452907] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.452920] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.452931] pci 0000:00:02.0: reg 10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.452937] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.452941] pci 0000:00:02.0: reg 20: [io 0xe080-0xe087]
[ 0.453005] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.453033] pci 0000:00:16.0: reg 10: [mem 0xd740a000-0xd740a00f 64bit]
[ 0.453127] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.453169] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.453194] pci 0000:00:1a.0: reg 10: [mem 0xd7408000-0xd74083ff]
[ 0.453302] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.453335] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.453356] pci 0000:00:1b.0: reg 10: [mem 0xd7400000-0xd7403fff 64bit]
[ 0.453452] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.453482] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.453581] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.453614] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.453715] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.453750] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.453849] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.453887] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.453911] pci 0000:00:1d.0: reg 10: [mem 0xd7407000-0xd74073ff]
[ 0.454021] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.454048] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.454133] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.454264] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.454290] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
[ 0.454301] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
[ 0.454312] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
[ 0.454323] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
[ 0.454333] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
[ 0.454345] pci 0000:00:1f.2: reg 24: [mem 0xd7406000-0xd74067ff]
[ 0.454410] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.454445] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.454473] pci 0000:00:1f.6: reg 10: [mem 0xd7404000-0xd7404fff 64bit]
[ 0.454615] pci 0000:01:00.0: [10de:0a70] type 00 class 0x030000
[ 0.454630] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.454646] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.454662] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.454674] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
[ 0.454685] pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
[ 0.454776] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.454779] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.454781] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
[ 0.454838] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.454843] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.454847] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd73fffff]
[ 0.454928] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.454952] pci 0000:03:00.0: reg 10: [mem 0xd4c00000-0xd4c0ffff 64bit]
[ 0.455061] pci 0000:03:00.0: supports D1
[ 0.455062] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.459514] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.459524] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.459532] pci 0000:00:1c.1: bridge window [mem 0xd4c00000-0xd5ffffff]
[ 0.459624] pci 0000:04:00.0: [1969:1063] type 00 class 0x020000
[ 0.459653] pci 0000:04:00.0: reg 10: [mem 0xd3800000-0xd383ffff 64bit]
[ 0.459669] pci 0000:04:00.0: reg 18: [io 0xa000-0xa07f]
[ 0.459799] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.467511] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.467520] pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
[ 0.467529] pci 0000:00:1c.5: bridge window [mem 0xd3800000-0xd4bfffff]
[ 0.467613] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.467626] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.467627] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.467629] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.467631] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.467633] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.467635] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.467636] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.467638] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfeafffff] (subtractive decode)
[ 0.467666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.467820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.467886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.467958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.468006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.468058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.468202] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.468409] pci0000:00: ACPI _OSC control (0x1d) granted
[ 1.196651] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 1.196705] PCI host bridge to bus 0000:ff
[ 1.196711] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 1.196730] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 1.196750] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 1.196767] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 1.196784] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 1.196801] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 1.196832] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 1.196834] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.196835] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.197016] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.197062] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.197103] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.197144] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.197184] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.197226] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.197267] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.197307] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 1.197397] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.197404] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.197407] vgaarb: loaded
[ 1.197408] vgaarb: bridge control possible 0000:01:00.0
[ 1.197408] vgaarb: no bridge control possible 0000:00:02.0
[ 1.197555] SCSI subsystem initialized
[ 1.197607] libata version 3.00 loaded.
[ 1.197624] ACPI: bus type usb registered
[ 1.197640] usbcore: registered new interface driver usbfs
[ 1.197647] usbcore: registered new interface driver hub
[ 1.197668] usbcore: registered new device driver usb
[ 1.197734] PCI: Using ACPI for IRQ routing
[ 1.207493] PCI: pci_cache_line_size set to 64 bytes
[ 1.207564] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[ 1.207566] e820: reserve RAM buffer [mem 0xaac41000-0xabffffff]
[ 1.207653] NetLabel: Initializing
[ 1.207654] NetLabel: domain hash size = 128
[ 1.207655] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.207668] NetLabel: unlabeled traffic allowed by default
[ 1.207736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.207742] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.209758] Switching to clocksource hpet
[ 1.215513] AppArmor: AppArmor Filesystem Enabled
[ 1.215545] pnp: PnP ACPI init
[ 1.215561] ACPI: bus type pnp registered
[ 1.215866] pnp 00:00: [bus 00-fe]
[ 1.215869] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.215871] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.215872] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.215874] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.215876] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.215877] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.215879] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.215881] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.215882] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.215884] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.215885] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.215887] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.215889] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.215890] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.215892] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.215894] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.215895] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.215897] pnp 00:00: [mem 0xb0000000-0xfeafffff window]
[ 1.215988] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.265774] pnp 00:01: [io 0x0000-0x001f]
[ 1.265776] pnp 00:01: [io 0x0081-0x0091]
[ 1.265778] pnp 00:01: [io 0x0093-0x009f]
[ 1.265779] pnp 00:01: [io 0x00c0-0x00df]
[ 1.265782] pnp 00:01: [dma 4]
[ 1.265804] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.265814] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.265834] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.265908] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.265929] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.265938] pnp 00:04: [io 0x00f0]
[ 1.265949] pnp 00:04: [irq 13]
[ 1.265971] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.265980] pnp 00:05: [io 0x002e-0x002f]
[ 1.265982] pnp 00:05: [io 0x004e-0x004f]
[ 1.265983] pnp 00:05: [io 0x0061]
[ 1.265984] pnp 00:05: [io 0x0063]
[ 1.265986] pnp 00:05: [io 0x0065]
[ 1.265988] pnp 00:05: [io 0x0067]
[ 1.265989] pnp 00:05: [io 0x0070]
[ 1.265990] pnp 00:05: [io 0x0092]
[ 1.265992] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.265993] pnp 00:05: [io 0x0680-0x069f]
[ 1.265995] pnp 00:05: [io 0xff00-0xff0f]
[ 1.265996] pnp 00:05: [io 0xffff]
[ 1.265998] pnp 00:05: [io 0xffff]
[ 1.265999] pnp 00:05: [io 0x0400-0x047f]
[ 1.266002] pnp 00:05: [io 0x0500-0x057f]
[ 1.266004] pnp 00:05: [io 0x164e-0x164f]
[ 1.266052] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.266054] system 00:05: [io 0xff00-0xff0f] has been reserved
[ 1.266056] system 00:05: [io 0xffff] has been reserved
[ 1.266058] system 00:05: [io 0xffff] has been reserved
[ 1.266060] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.266062] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.266064] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.266067] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.266076] pnp 00:06: [io 0x0070-0x0077]
[ 1.266082] pnp 00:06: [irq 8]
[ 1.266103] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.266117] pnp 00:07: [io 0x0240-0x0259]
[ 1.266148] system 00:07: [io 0x0240-0x0259] has been reserved
[ 1.266151] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.266192] pnp 00:08: [irq 12]
[ 1.266219] pnp 00:08: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.266239] pnp 00:09: [io 0x0060]
[ 1.266241] pnp 00:09: [io 0x0064]
[ 1.266247] pnp 00:09: [irq 1]
[ 1.266273] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.266608] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.266610] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 1.266612] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.266613] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.266615] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.266617] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.266618] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.266620] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 1.266621] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.266623] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.266624] pnp 00:0a: [mem 0xd7405000-0xd7405fff]
[ 1.266626] pnp 00:0a: [mem 0xdffff000-0xdfffffff]
[ 1.266679] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.266682] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.266684] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.266686] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.266688] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.266690] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.266692] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.266694] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.266696] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.266698] system 00:0a: [mem 0xd7405000-0xd7405fff] has been reserved
[ 1.266700] system 00:0a: [mem 0xdffff000-0xdfffffff] has been reserved
[ 1.266703] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.266842] pnp 00:0b: [bus ff]
[ 1.266883] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.266903] pnp: PnP ACPI: found 12 devices
[ 1.266904] ACPI: ACPI bus type pnp unregistered
[ 1.273822] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 1.273833] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 1.273844] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
[ 1.273859] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.273861] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.273863] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.273868] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd3100000-0xd32fffff 64bit pref]
[ 1.273872] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7500000-0xd76fffff 64bit pref]
[ 1.273875] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd7700000-0xd78fffff 64bit pref]
[ 1.273878] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.273880] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.273883] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
[ 1.273888] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.273891] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.273897] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd73fffff]
[ 1.273901] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd32fffff 64bit pref]
[ 1.273909] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.273912] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.273918] pci 0000:00:1c.1: bridge window [mem 0xd4c00000-0xd5ffffff]
[ 1.273923] pci 0000:00:1c.1: bridge window [mem 0xd7500000-0xd76fffff 64bit pref]
[ 1.273930] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.273933] pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
[ 1.273939] pci 0000:00:1c.5: bridge window [mem 0xd3800000-0xd4bfffff]
[ 1.273944] pci 0000:00:1c.5: bridge window [mem 0xd7700000-0xd78fffff 64bit pref]
[ 1.273951] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 1.274004] pci 0000:00:1e.0: setting latency timer to 64
[ 1.274009] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.274011] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.274012] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.274014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.274016] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.274017] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.274019] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.274021] pci_bus 0000:00: resource 11 [mem 0xb0000000-0xfeafffff]
[ 1.274023] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.274024] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
[ 1.274027] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.274028] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd73fffff]
[ 1.274030] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd32fffff 64bit pref]
[ 1.274032] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.274033] pci_bus 0000:03: resource 1 [mem 0xd4c00000-0xd5ffffff]
[ 1.274035] pci_bus 0000:03: resource 2 [mem 0xd7500000-0xd76fffff 64bit pref]
[ 1.274037] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.274039] pci_bus 0000:04: resource 1 [mem 0xd3800000-0xd4bfffff]
[ 1.274040] pci_bus 0000:04: resource 2 [mem 0xd7700000-0xd78fffff 64bit pref]
[ 1.274042] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.274044] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.274046] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.274047] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.274049] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.274051] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.274052] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.274054] pci_bus 0000:05: resource 11 [mem 0xb0000000-0xfeafffff]
[ 1.274087] NET: Registered protocol family 2
[ 1.274198] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.274887] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.276493] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.276696] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.276697] TCP: reno registered
[ 1.276706] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.276725] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.276812] NET: Registered protocol family 1
[ 1.276831] pci 0000:00:02.0: Boot video device
[ 1.609567] PCI: CLS 64 bytes, default 64
[ 1.609615] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.609618] software IO TLB [mem 0xa6c3a000-0xaac39fff] (64MB) mapped at [ffff8800a6c3a000-ffff8800aac39fff]
[ 1.610158] audit: initializing netlink socket (disabled)
[ 1.610174] type=2000 audit(1343123079.472:1): initialized
[ 1.631588] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.633091] VFS: Disk quotas dquot_6.5.2
[ 1.633130] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.633558] fuse init (API version 7.19)
[ 1.633631] msgmni has been set to 7481
[ 1.634075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.634109] io scheduler noop registered
[ 1.634111] io scheduler deadline registered (default)
[ 1.634134] io scheduler cfq registered
[ 1.634244] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.634348] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.634483] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.634617] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 1.634716] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.634719] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.634721] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.634740] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.634745] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.634763] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 1.634765] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.634770] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 1.634790] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 1.634792] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.634797] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 1.634807] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.634882] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3b42 ss_vid 1043 ss_did 1017
[ 1.634906] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 1.634918] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 3b44 ss_vid 1043 ss_did 1017
[ 1.634933] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 1.634944] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 3b4c ss_vid 1043 ss_did 1017
[ 1.634958] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 1.634962] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.635002] intel_idle: MWAIT substates: 0x1120
[ 1.635003] intel_idle: v0.4 model 0x25
[ 1.635004] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.635128] ACPI: AC Adapter [AC0] (on-line)
[ 1.635231] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.636145] ACPI: Lid Switch [LID]
[ 1.636183] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.636188] ACPI: Sleep Button [SLPB]
[ 1.636217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.636219] ACPI: Power Button [PWRF]
[ 1.636290] ACPI: Requesting acpi_cpufreq
[ 1.739993] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.739995] ACPI: Thermal Zone [THRM] (66 C)
[ 1.740027] GHES: HEST is not enabled!
[ 1.740115] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.742093] Linux agpgart interface v0.103
[ 1.742193] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.742296] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.743124] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.743291] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 1.744946] brd: module loaded
[ 1.745882] loop: module loaded
[ 1.746026] ahci 0000:00:1f.2: version 3.0
[ 1.746106] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.746169] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.746173] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.746178] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.746470] scsi0 : ahci
[ 1.746552] scsi1 : ahci
[ 1.746616] scsi2 : ahci
[ 1.746681] scsi3 : ahci
[ 1.746831] ata1: SATA max UDMA/133 abar m2048@0xd7406000 port 0xd7406100 irq 44
[ 1.746833] ata2: DUMMY
[ 1.746834] ata3: DUMMY
[ 1.746835] ata4: DUMMY
[ 1.747110] Fixed MDIO Bus: probed
[ 1.747145] tun: Universal TUN/TAP device driver, 1.6
[ 1.747146] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.747201] PPP generic driver version 2.4.2
[ 1.747280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.747315] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.747319] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.747324] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.747352] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.751329] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.751354] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd7408000
[ 1.758945] ACPI: Battery Slot [BAT0] (battery present)
[ 1.761402] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.761451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.761460] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.761462] usb usb1: Product: EHCI Host Controller
[ 1.761463] usb usb1: Manufacturer: Linux 3.5.0-030500-generic ehci_hcd
[ 1.761465] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.761603] hub 1-0:1.0: USB hub found
[ 1.761611] hub 1-0:1.0: 2 ports detected
[ 1.761685] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.761689] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.761693] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.761719] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.765684] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.765698] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd7407000
[ 1.777396] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.777424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.777429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.777433] usb usb2: Product: EHCI Host Controller
[ 1.777437] usb usb2: Manufacturer: Linux 3.5.0-030500-generic ehci_hcd
[ 1.777441] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.777568] hub 2-0:1.0: USB hub found
[ 1.777571] hub 2-0:1.0: 2 ports detected
[ 1.777619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.777634] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.777672] usbcore: registered new interface driver libusual
[ 1.777705] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.779194] i8042: Detected active multiplexing controller, rev 1.1
[ 1.780031] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.780036] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.780058] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.780074] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.780089] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.780200] mousedev: PS/2 mouse device common for all mice
[ 1.780373] rtc_cmos 00:06: RTC can wake from S4
[ 1.780510] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.780542] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.780605] device-mapper: uevent: version 1.0.3
[ 1.780668] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.780729] cpuidle: using governor ladder
[ 1.780803] cpuidle: using governor menu
[ 1.780804] EFI Variables Facility v0.08 2004-May-17
[ 1.781071] ashmem: initialized
[ 1.781190] TCP: cubic registered
[ 1.781270] NET: Registered protocol family 10
[ 1.781493] NET: Registered protocol family 17
[ 1.781503] Key type dns_resolver registered
[ 1.781676] PM: Hibernation image not present or could not be loaded.
[ 1.781689] registered taskstats version 1
[ 1.782588] Key type trusted registered
[ 1.783587] Key type encrypted registered
[ 1.784874] Magic number: 4:447:728
[ 1.785077] rtc_cmos 00:06: setting system clock to 2012-07-24 09:44:40 UTC (1343123080)
[ 1.795201] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.795203] EDD information not available.
[ 1.816706] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.065302] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.065811] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.065926] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.065931] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.066297] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 2.066301] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.066904] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.067019] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.067024] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.067387] ata1.00: configured for UDMA/133
[ 2.067708] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 2.067911] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.067917] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.068130] sd 0:0:0:0: [sda] Write Protect is off
[ 2.068135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.068271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.069627] sda: sda1 sda2 < sda5 >
[ 2.070609] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.070675] md: Waiting for all devices to be available before autodetect
[ 2.070680] md: If you don't use raid, use raid=noautodetect
[ 2.070889] md: Autodetecting RAID arrays.
[ 2.070891] md: Scanned 0 and added 0 devices.
[ 2.070892] md: autorun ...
[ 2.070893] md: ... autorun DONE.
[ 2.071177] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 2.073274] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.078876] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.078887] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 2.080370] devtmpfs: mounted
[ 2.081909] Freeing unused kernel memory: 936k freed
[ 2.082070] Write protecting the kernel read-only data: 12288k
[ 2.086351] Freeing unused kernel memory: 1432k freed
[ 2.089827] Freeing unused kernel memory: 1096k freed
[ 2.158456] init: Failed to create pty - disabling logging for job
[ 2.158527] init: Temporary process spawn error: No such file or directory
[ 2.166607] init: Failed to create pty - disabling logging for job
[ 2.166674] init: Temporary process spawn error: No such file or directory
[ 2.167755] init: Failed to create pty - disabling logging for job
[ 2.167830] init: Temporary process spawn error: No such file or directory
[ 2.205701] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.205712] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.206194] hub 1-1:1.0: USB hub found
[ 2.206313] hub 1-1:1.0: 6 ports detected
[ 2.222655] init: Failed to create pty - disabling logging for job
[ 2.222726] init: Temporary process spawn error: No such file or directory
[ 2.228723] init: Failed to create pty - disabling logging for job
[ 2.228792] init: Temporary process spawn error: No such file or directory
[ 2.246206] init: Failed to create pty - disabling logging for job
[ 2.246280] init: Temporary process spawn error: No such file or directory
[ 2.256154] init: Failed to create pty - disabling logging for job
[ 2.256225] init: Temporary process spawn error: No such file or directory
[ 2.271363] init: Failed to create pty - disabling logging for job
[ 2.271437] init: Temporary process spawn error: No such file or directory
[ 2.272154] init: Failed to create pty - disabling logging for job
[ 2.272223] init: Temporary process spawn error: No such file or directory
[ 2.272968] init: Failed to create pty - disabling logging for job
[ 2.273038] init: Temporary process spawn error: No such file or directory
[ 2.317130] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.331030] init: Failed to create pty - disabling logging for job
[ 2.331104] init: Temporary process spawn error: No such file or directory
[ 2.332090] init: Failed to create pty - disabling logging for job
[ 2.332165] init: Temporary process spawn error: No such file or directory
[ 2.333372] init: Failed to create pty - disabling logging for job
[ 2.333503] init: Temporary process spawn error: No such file or directory
[ 2.339901] init: Failed to create pty - disabling logging for job
[ 2.339978] init: Temporary process spawn error: No such file or directory
[ 2.349059] udevd[181]: starting version 175
[ 2.350143] init: Failed to create pty - disabling logging for job
[ 2.350212] init: Temporary process spawn error: No such file or directory
[ 2.351999] init: Failed to create pty - disabling logging for job
[ 2.352089] init: Temporary process spawn error: No such file or directory
[ 2.352726] init: Failed to create pty - disabling logging for job
[ 2.352826] init: Temporary process spawn error: No such file or directory
[ 2.378001] lp: driver loaded but no devices found
[ 2.425684] wmi: Mapper loaded
[ 2.427893] asus_laptop: Asus Laptop Support version 0.42
[ 2.428111] asus_laptop: BSTS called, 0x7c00 returned
[ 2.428735] asus_laptop: Backlight controlled by ACPI video driver
[ 2.428807] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input4
[ 2.449369] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.449375] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.449794] hub 2-1:1.0: USB hub found
[ 2.449862] hub 2-1:1.0: 8 ports detected
[ 2.465148] mei 0000:00:16.0: setting latency timer to 64
[ 2.465229] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 2.470511] mei 0000:00:16.0: wd: failed to find the client
[ 2.473773] [drm] Initialized drm 1.1.0 20060810
[ 2.481855] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 2.481866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.481869] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 2.481873] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20120320/utaddress-251)
[ 2.481878] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20120320/utaddress-251)
[ 2.481882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.481886] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 2.481890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.481891] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.485836] cfg80211: Calling CRDA to update world regulatory domain
[ 2.487294] i915 0000:00:02.0: setting latency timer to 64
[ 2.521510] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2.533272] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.533285] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.533287] [drm] Driver supports precise vblank timestamp query.
[ 2.533557] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.533559] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 2.536044] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 2.536619] atl1c 0000:04:00.0: version 1.0.1.0-NAPI
[ 2.570968] ath: EEPROM regdomain: 0x60
[ 2.570973] ath: EEPROM indicates we should expect a direct regpair map
[ 2.570976] ath: Country alpha2 being used: 00
[ 2.570977] ath: Regpair used: 0x60
[ 2.571079] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571082] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571083] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571085] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571087] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571089] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571090] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571092] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571093] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571095] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571097] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571099] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571101] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571103] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571105] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571107] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571109] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571111] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571113] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571115] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571117] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571119] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571121] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571123] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571125] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571127] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.571129] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2.571131] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.574029] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.592801] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 2.593199] Registered led device: ath9k-phy0
[ 2.593210] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900110c0000, irq=17
[ 2.596244] init: Failed to create pty - disabling logging for job
[ 2.596330] init: Temporary process spawn error: No such file or directory
[ 2.611356] Refined TSC clocksource calibration: 2466.003 MHz.
[ 2.611363] Switching to clocksource tsc
[ 2.617463] type=1400 audit(1343123081.330:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
[ 2.617993] type=1400 audit(1343123081.330:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[ 2.618274] type=1400 audit(1343123081.330:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[ 2.619127] init: Failed to create pty - disabling logging for job
[ 2.619160] init: Temporary process spawn error: No such file or directory
[ 2.628800] init: Failed to create pty - disabling logging for job
[ 2.628942] init: Temporary process spawn error: No such file or directory
[ 2.630292] init: Failed to create pty - disabling logging for job
[ 2.630375] init: Temporary process spawn error: No such file or directory
[ 2.697224] usb 1-1.2: New USB device found, idVendor=064e, idProduct=a136
[ 2.697226] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.697228] usb 1-1.2: Product: USB 2.0 UVC 0.3M Webcam
[ 2.697230] usb 1-1.2: Manufacturer: SuYin
[ 2.697231] usb 1-1.2: SerialNumber: CN031B-S233-MI01-VS-R01.01.01
[ 2.712286] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 2.719569] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 2.721695] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 2.727103] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.743276] kvm: disabled by bios
[ 2.744204] Linux video capture interface: v2.00
[ 2.746341] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.746346] cfg80211: World regulatory domain updated:
[ 2.746347] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.746349] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.746350] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.746352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.746353] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.746354] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.747403] uvcvideo: Found UVC 1.00 device USB 2.0 UVC 0.3M Webcam (064e:a136)
[ 2.753387] Adding 3976188k swap on /dev/sda5. Priority:-1 extents:1 across:3976188k SS
[ 2.769032] usb 1-1.5: new full-speed USB device number 4 using ehci_hcd
[ 2.774800] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[ 2.778624] input: USB 2.0 UVC 0.3M Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 2.778719] usbcore: registered new interface driver uvcvideo
[ 2.778721] USB Video Class driver (1.1.1)
[ 2.798478] init: Failed to create pty - disabling logging for job
[ 2.798569] init: Temporary process spawn error: No such file or directory
[ 2.799324] init: Failed to create pty - disabling logging for job
[ 2.799409] init: Temporary process spawn error: No such file or directory
[ 2.801307] init: Failed to create pty - disabling logging for job
[ 2.801398] init: Temporary process spawn error: No such file or directory
[ 2.802098] init: Failed to create pty - disabling logging for job
[ 2.802197] init: Temporary process spawn error: No such file or directory
[ 2.806521] init: Failed to create pty - disabling logging for job
[ 2.806615] init: Temporary process spawn error: No such file or directory
[ 2.808642] init: Failed to create pty - disabling logging for job
[ 2.808729] init: Temporary process spawn error: No such file or directory
[ 2.813002] init: failsafe main process (765) killed by TERM signal
[ 2.847593] kvm: disabled by bios
[ 2.853939] init: Failed to create pty - disabling logging for job
[ 2.854035] init: Temporary process spawn error: No such file or directory
[ 2.855591] init: Failed to create pty - disabling logging for job
[ 2.855710] init: Temporary process spawn error: No such file or directory
[ 2.857474] type=1400 audit(1343123081.570:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=830 comm="apparmor_parser"
[ 2.857620] init: Failed to create pty - disabling logging for job
[ 2.857714] init: Temporary process spawn error: No such file or directory
[ 2.858036] type=1400 audit(1343123081.570:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=829 comm="apparmor_parser"
[ 2.858224] type=1400 audit(1343123081.570:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=830 comm="apparmor_parser"
[ 2.858533] type=1400 audit(1343123081.570:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=830 comm="apparmor_parser"
[ 2.859838] init: Failed to create pty - disabling logging for job
[ 2.859939] init: Temporary process spawn error: No such file or directory
[ 2.863707] type=1400 audit(1343123081.574:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=839 comm="apparmor_parser"
[ 2.864613] init: Failed to create pty - disabling logging for job
[ 2.864837] init: Temporary process spawn error: No such file or directory
[ 2.866118] usb 1-1.5: New USB device found, idVendor=0b05, idProduct=1788
[ 2.866123] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.866125] usb 1-1.5: Product: BT-270
[ 2.866128] usb 1-1.5: Manufacturer: Broadcom Corp
[ 2.866130] usb 1-1.5: SerialNumber: 1C4BD61B1BD1
[ 2.867154] type=1400 audit(1343123081.578:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=843 comm="apparmor_parser"
[ 2.873050] ppdev: user-space parallel port driver
[ 2.878431] Bluetooth: Core ver 2.16
[ 2.878456] NET: Registered protocol family 31
[ 2.878458] Bluetooth: HCI device and connection manager initialized
[ 2.878461] Bluetooth: HCI socket layer initialized
[ 2.878462] Bluetooth: L2CAP socket layer initialized
[ 2.878467] Bluetooth: SCO socket layer initialized
[ 2.893247] Bluetooth: RFCOMM TTY layer initialized
[ 2.893254] Bluetooth: RFCOMM socket layer initialized
[ 2.893256] Bluetooth: RFCOMM ver 1.11
[ 2.899384] usbcore: registered new interface driver btusb
[ 2.910038] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.910043] Bluetooth: BNEP filters: protocol multicast
[ 2.976866] init: Failed to create pty - disabling logging for job
[ 2.976969] init: Temporary process spawn error: No such file or directory
[ 2.982252] init: Failed to create pty - disabling logging for job
[ 2.982361] init: Temporary process spawn error: No such file or directory
[ 2.983636] init: Failed to create pty - disabling logging for job
[ 2.983735] init: Temporary process spawn error: No such file or directory
[ 2.984670] init: Failed to create pty - disabling logging for job
[ 2.984771] init: Temporary process spawn error: No such file or directory
[ 2.988706] init: Failed to create pty - disabling logging for job
[ 2.988816] init: Temporary process spawn error: No such file or directory
[ 2.990974] init: Failed to create pty - disabling logging for job
[ 2.991121] init: Temporary process spawn error: No such file or directory
[ 2.993296] init: Failed to create pty - disabling logging for job
[ 2.993405] init: Temporary process spawn error: No such file or directory
[ 3.002099] init: Failed to create pty - disabling logging for job
[ 3.002205] init: Temporary process spawn error: No such file or directory
[ 3.010474] init: Failed to create pty - disabling logging for job
[ 3.010585] init: Temporary process spawn error: No such file or directory
[ 3.010796] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.013333] init: Failed to create pty - disabling logging for job
[ 3.013436] init: Temporary process spawn error: No such file or directory
[ 3.014634] init: Failed to create pty - disabling logging for job
[ 3.014739] init: Temporary process spawn error: No such file or directory
[ 3.018411] init: Failed to create pty - disabling logging for job
[ 3.018518] init: Temporary process spawn error: No such file or directory
[ 3.020554] init: Failed to create pty - disabling logging for job
[ 3.020666] init: Temporary process spawn error: No such file or directory
[ 3.021413] init: Failed to create pty - disabling logging for job
[ 3.021513] init: Temporary process spawn error: No such file or directory
[ 3.022825] init: Failed to create pty - disabling logging for job
[ 3.022911] init: Temporary process spawn error: No such file or directory
[ 3.027115] init: alsa-restore main process (943) terminated with status 19
[ 3.052390] bbswitch: version 0.4.2
[ 3.052401] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 3.052411] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG1.GFX0
[ 3.052577] bbswitch: detected an Optimus _DSM function
[ 3.052587] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 3.057423] atl1c 0000:04:00.0: irq 47 for MSI/MSI-X
[ 3.063096] bbswitch: disabling discrete graphics
[ 3.063227] bbswitch: Result of Optimus _DSM call: 01000058
[ 3.074191] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.112830] fbcon: inteldrmfb (fb0) is primary device
[ 3.170879] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 3.176758] pci 0000:01:00.0: power state changed by ACPI to D3
[ 3.198870] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 3.304779] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input6
[ 3.443204] Console: switching to colour frame buffer device 170x48
[ 3.445880] fb0: inteldrmfb frame buffer device
[ 3.445881] drm: registered panic notifier
[ 3.446902] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 3.447394] acpi device:04: registered as cooling_device4
[ 3.447424] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 3.447575] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 3.450576] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 3.450906] acpi device:49: registered as cooling_device5
[ 3.451175] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.451811] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input8
[ 3.452902] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.453846] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 3.454100] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 3.454207] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 3.455604] init: Failed to create pty - disabling logging for job
[ 3.455698] init: Temporary process spawn error: No such file or directory
[ 3.457336] init: Failed to create pty - disabling logging for job
[ 3.457394] init: Temporary process spawn error: No such file or directory
[ 3.459016] init: Failed to create pty - disabling logging for job
[ 3.459103] init: Temporary process spawn error: No such file or directory
[ 3.459588] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[ 3.459998] init: Failed to create pty - disabling logging for job
[ 3.460053] init: Temporary process spawn error: No such file or directory
[ 3.461608] init: Failed to create pty - disabling logging for job
[ 3.461688] init: Temporary process spawn error: No such file or directory
[ 3.464936] init: Failed to create pty - disabling logging for job
[ 3.465018] init: Temporary process spawn error: No such file or directory
[ 3.506401] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.506502] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.506571] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.547308] init: Failed to create pty - disabling logging for job
[ 3.547390] init: Temporary process spawn error: No such file or directory
[ 3.548656] init: Failed to create pty - disabling logging for job
[ 3.548736] init: Temporary process spawn error: No such file or directory
[ 3.940828] init: Failed to create pty - disabling logging for job
[ 3.940904] init: Temporary process spawn error: No such file or directory
[ 5.881058] wlan0: authenticate with 00:0f:b5:da:2d:ce
[ 5.892451] wlan0: send auth to 00:0f:b5:da:2d:ce (try 1/3)
[ 5.894131] wlan0: authenticated
[ 5.906947] wlan0: associate with 00:0f:b5:da:2d:ce (try 1/3)
[ 5.909847] wlan0: RX AssocResp from 00:0f:b5:da:2d:ce (capab=0x431 status=0 aid=1)
[ 5.909932] wlan0: associated
[ 5.910458] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 477.549610] wlan0: deauthenticating from 00:0f:b5:da:2d:ce by local choice (reason=3)
[ 477.556421] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 477.556428] cfg80211: Restoring regulatory settings
[ 477.556432] cfg80211: Calling CRDA to update world regulatory domain
[ 477.601295] device wlan0 entered promiscuous mode
[ 477.602245] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 477.602275] cfg80211: World regulatory domain updated:
[ 477.602277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 477.602278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 477.602280] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 477.602281] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 477.602283] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 477.602284] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 515.070870] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 516.669131] wlan0: authenticate with 00:0f:b5:da:2d:ce
[ 516.687909] wlan0: send auth to 00:0f:b5:da:2d:ce (try 1/3)
[ 516.689535] wlan0: authenticated
[ 516.699908] wlan0: associate with 00:0f:b5:da:2d:ce (try 1/3)
[ 516.702904] wlan0: RX AssocResp from 00:0f:b5:da:2d:ce (capab=0x431 status=0 aid=1)
[ 516.702994] wlan0: associated
[ 516.703773] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1181.457160] asus_laptop: Unknown key 57 pressed
[ 1734.496238] bbswitch: enabling discrete graphics
[ 1734.967913] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1734.967920] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1734.967958] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1734.967961] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1734.967965] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 1734.981919] MXM: GUID detected in BIOS
[ 1734.981967] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880141fe5240 (20120320/exresop-590)
[ 1734.981972] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 1734.981976] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880141dc8528), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 1734.981986] failed to evaluate _DSM: 12291
[ 1734.982071] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880141fe5240 (20120320/exresop-590)
[ 1734.982074] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 1734.982078] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880141dc8528), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 1734.982083] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff880141df8398), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 1734.982089] failed to evaluate _DSM: 12291
[ 1734.982152] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG1.GFX0 handle
[ 1734.982183] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 1734.982186] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 1734.982191] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 1734.982500] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1)
[ 1734.988031] vga_switcheroo: enabled
[ 1734.988050] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 1734.988057] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 1734.988058] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 1734.988085] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 1734.988086] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 1735.780825] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1735.780828] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[ 1735.780830] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1735.780832] [drm] nouveau 0000:01:00.0: Bios version 70.18.66.00
[ 1735.780835] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 1735.781154] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 1735.781157] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 1735.781160] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000
[ 1735.781162] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[ 1735.781165] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146
[ 1735.781167] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261
[ 1735.781168] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330
[ 1735.781170] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400
[ 1735.781172] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560
[ 1735.781183] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[ 1735.781186] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDDBB
[ 1735.802447] [drm] nouveau 0000:01:00.0: 0xDD22: i2c wr fail: -6
[ 1735.822377] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE26E
[ 1735.849937] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF2B
[ 1735.849968] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF44
[ 1735.851014] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF02B
[ 1735.851015] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF090
[ 1735.875630] [TTM] Zone kernel: Available graphics memory: 1917086 kiB
[ 1735.875633] [TTM] Initializing pool allocator
[ 1735.875640] [TTM] Initializing DMA pool allocator
[ 1735.875658] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
[ 1735.877004] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1735.944556] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1735.944560] [drm] No driver support for vblank timestamp query.
[ 1735.944563] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 1735.949629] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 1735.949633] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 1735.949637] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
[ 1735.949640] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV
[ 1735.949643] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 1000mV
[ 1735.998120] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
[ 1736.364645] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013b0d3000
[ 1736.364723] fb1: nouveaufb frame buffer device
[ 1736.364727] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
[ 1736.592970] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[ 1746.671039] [TTM] Finalizing pool allocator
[ 1746.671055] [TTM] Finalizing DMA pool allocator
[ 1746.671113] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 1746.673903] vga_switcheroo: disabled
[ 1746.676951] [drm] Module unloaded
[ 1746.680577] bbswitch: disabling discrete graphics
[ 1746.680843] bbswitch: Result of Optimus _DSM call: 01000058
[ 1746.695762] pci_raw_set_power_state: 37 callbacks suppressed
[ 1746.695768] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 1746.771807] pci 0000:01:00.0: power state changed by ACPI to D3
[ 1840.535604] bbswitch: enabling discrete graphics
[ 1841.009880] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1841.009889] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1841.009932] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1841.009936] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1841.016162] MXM: GUID detected in BIOS
[ 1841.016208] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88013e610d80 (20120320/exresop-590)
[ 1841.016213] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 1841.016218] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880141dc8528), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 1841.016228] failed to evaluate _DSM: 12291
[ 1841.016312] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88013e610d80 (20120320/exresop-590)
[ 1841.016315] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 1841.016319] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880141dc8528), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 1841.016324] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff880141df8398), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 1841.016330] failed to evaluate _DSM: 12291
[ 1841.016391] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG1.GFX0 handle
[ 1841.016701] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1)
[ 1841.022351] vga_switcheroo: enabled
[ 1841.022366] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 1841.022373] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 1841.022374] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 1841.022401] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 1841.022402] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 1841.791287] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1841.791290] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[ 1841.791293] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1841.791295] [drm] nouveau 0000:01:00.0: Bios version 70.18.66.00
[ 1841.791298] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 1841.791537] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 1841.791540] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 1841.791542] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000
[ 1841.791544] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[ 1841.791546] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146
[ 1841.791547] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261
[ 1841.791548] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330
[ 1841.791550] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400
[ 1841.791551] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560
[ 1841.791561] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[ 1841.791563] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDDBB
[ 1841.812802] [drm] nouveau 0000:01:00.0: 0xDD22: i2c wr fail: -6
[ 1841.832731] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE26E
[ 1841.840460] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF2B
[ 1841.840490] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF44
[ 1841.841534] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF02B
[ 1841.841536] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF090
[ 1841.866112] [TTM] Zone kernel: Available graphics memory: 1917086 kiB
[ 1841.866114] [TTM] Initializing pool allocator
[ 1841.866119] [TTM] Initializing DMA pool allocator
[ 1841.866132] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
[ 1841.867517] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1841.935253] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1841.935257] [drm] No driver support for vblank timestamp query.
[ 1841.935260] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 1841.940509] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 1841.940514] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 1841.940518] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
[ 1841.940521] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV
[ 1841.940524] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 1000mV
[ 1841.989042] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
[ 1842.353313] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff8800a68fbc00
[ 1842.353383] fb1: nouveaufb frame buffer device
[ 1842.353388] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
[ 1842.547160] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[ 1849.726950] [TTM] Finalizing pool allocator
[ 1849.726968] [TTM] Finalizing DMA pool allocator
[ 1849.727051] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 1849.729748] vga_switcheroo: disabled
[ 1849.732262] [drm] Module unloaded
[ 1849.733841] bbswitch: disabling discrete graphics
[ 1849.734244] bbswitch: Result of Optimus _DSM call: 01000058
[ 1849.746439] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 1849.822532] pci 0000:01:00.0: power state changed by ACPI to D3Les deux dernières lignes m'intriguent : ça aurait pas un rapport ?
Et je me demande ou est allé se coller cette batterie.
Dernière modification par monsieurweller (Le 24/07/2012, à 12:31)
#1858 Le 24/07/2012, à 12:39
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Non les deux dernières lignes c'est rien, c'est juste la carte qui fait des siennes car bbswitch est un peu trop rapide. Beaucoup d'erreurs ACPI dans le log, mais c'est dû à vga_switcheroo apparemment.
Mais sinon pour la batterie je ne sais pas, elle est bien marqué détectée comme BAT0 par l'ACPI...
Hors ligne
#1859 Le 24/07/2012, à 12:45
- compte supprimé
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
ArchangeGabriel a écrit :
Non les deux dernières lignes c'est rien, c'est juste la carte qui fait des siennes car bbswitch est un peu trop rapide. Beaucoup d'erreurs ACPI dans le log, mais c'est dû à vga_switcheroo apparemment.
Mais sinon pour la batterie je ne sais pas, elle est bien marqué détectée comme BAT0 par l'ACPI...
Ok merci !
Y'a moyen de virer ce vga_switcheroo ?
#1860 Le 24/07/2012, à 12:48
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Euh oui en recompilant le noyau sans, mais ça n'a pas beaucoup d'intérêt. Et à terme, c'est lui qui doit remplacer bbswitch je pense.
Hors ligne
#1861 Le 24/07/2012, à 13:15
- cdjklm
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@GP74:et bien voila finalement j ai abandonné pour la hdmi,un peu trop complex pour moi j ai donc ésseillé de revenir au pilot 302 pour récuperer mon unity mais rien à faire,j ai donc décidé de l'enlever (tout qui portait le nom unity ou presque via synaptique avec suppression complete de configuration) et de mettre DOCKY à la place et lor d un redémarrage j'ai un méssage qui me dis:
"The system is running in low graphics mode" suivi de "Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself"
je fais OK et ça m'ouvre une fenètre avec plusieurs choix mais impossible d'aller plus loin,ce méssage m'était tout le temp indiquer l'orsque j'ésseillai d'ouvrir le control panel nvidia et qu'il fallait que je bidouille le xserver et j ai du mainte fois formater mon pc,pour l'instant je préfère attendre car j ai un autre portable et j ai monté le disque dur du pc cassé en externe pour jouer plus facilement sur les fichiers et dossiers,si je pouvais les récupérer et faire du copier coller ce serrait impec et ainsi récupérer ma configuration.aider moi s ils vous plait dans la mesure du possible.
version 20.04 sur asus n55sf
Hors ligne
#1862 Le 24/07/2012, à 13:19
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Euh vu le bordel que tu nous fais, je te suggère de récupérer toutes tes données, de faire une installation propre, et de te cantonner aux instructions de bases pour l'installation de Bumblebee, sans utiliser xorg-edgers.
Hors ligne
#1863 Le 24/07/2012, à 23:11
- Erzogue
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bonsoir,
Etant propriétaire d'un pc samsung utilisant la technologie Optimus, j'ai voulu installé Google Earth. je vais donc sur le site de celui ci, télécharge le .deb, l'installe et effectue un apt-get -f install pour récupérer les paquets restant. Cela ne marche pas, la console me dit de faire un apt-get update ce que je fais. Cela fonctionne après. Ensuite google earth ne marchant pas, je vais donc vérifier sur le site et les pc 64 bits doivent aussi installer lib32nss-mdns. Bon google earth ne marche toujours pas. Je désinstalle, j'autoremove.. et j'en profite pour faire une maj du systeme. Le soucis est que maintenant je n'ai plus accès à la luminosité de mon pc. J'avais déjà pas accès aux touches fn + luminosités avant. Voila que ça ne marche plus sur "Luminosité et verouillage." Lorsque je veux baisser la luminosité, l'écran se met a clignoter et freeze complet. Obliger de faire un hard reboot. Par ailleurs lorsque je fais un apt-get update, j'ai des Ign dans la liste. Je suppose que c'est pour ignorer non ?
Cordialement !
Erzogue
Hors ligne
#1864 Le 24/07/2012, à 23:13
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Je ne sais pas trop, mais a priori tu n'es pas au bon endroit pour obtenir de l'aide sur ce problème.
Hors ligne
#1865 Le 24/07/2012, à 23:47
- cdjklm
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
bon bein voila j ai tout formate,domage que ce problem ne peut etre résolu ca aurrait souvent je pense sauver plus d une configuration j éspere que les probleme du a optirun serront bientot régler,merci a vous de votre soutien et bonne continuation dans dans le dévellopement.
version 20.04 sur asus n55sf
Hors ligne
#1866 Le 25/07/2012, à 00:46
- Erzogue
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
C'est bon j'ai compris d'ou venait le problème. Lors de la MAJ j'ai installé le kernel 3.2.0-27. J'ai essayé de repassé en 3.2.0-25 pour voir. et la la luminosité peux se baisser normalement.
Dernière modification par Erzogue (Le 25/07/2012, à 01:12)
Hors ligne
#1867 Le 25/07/2012, à 02:46
- Beamboomer
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bonsoir,
Déjà bravo pour cette initiative ! (et merci pour le premier post bien détaillé, il est trop tard et je suis trop crevé pour me taper les 75 pages maintenant ^^)
Je me pose une question simple : je cherchais à remplacer mon portable par un petit ultrabook genre Asus UX31, mais je me suis toujours dit que c'était pas la peine de s'y essayer à cause justement des technologies embarquées. Maintenant que je vois ce projet je me dis peut-être que...
Vous conseillerez l'achat d'un tel PC (utilisation Ubuntu/Debian, éventuellement dualBoot Win mais en règle générale plutôt machine virtuelle) ou plutôt rester raisonnable en conseillant de prendre autre chose parce que c'est encore trop bidouille et instable pour justifier un achat en connaissance de cause ?
J'ai peur de faire une connerie 
(genre de mon côté j'ai une carte son Line6 UX2 pour des petits enregistrements, je l'avais achetée à l'époque où j'étais encore chez Microsoft mais ça a été la merde pour la faire marcher sur Ubuntu. Et encore à ce jour c'est pas bon, avec le recul j'aurais certainement pas pris ça).
Hors ligne
#1868 Le 25/07/2012, à 10:37
- metalux
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
H.S:
@Beamboomer
As-tu consulté cette page?
Hors ligne
#1869 Le 25/07/2012, à 14:05
- Beamboomer
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
(HS oui oui metalux j'avais installé ces pilotes mais en ce qui me concerne, j'ai un problème de son à l'enregistrement, genre des claquements que j'ai pas sous win, et des petit trucs chiants, genre pas possible d'utiliser l'entrée stéréo ou vu-mètre en façade qui ne fonctionne pas.. Mais merci quand même 
)
Hors ligne
#1870 Le 25/07/2012, à 20:01
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@Beamboomer : C'est à voir en fonction de tes usages. Si tu as besoin d'une carte graphique dédiée, alors de toutes façons pas trop le choix. Du côté de Bumblebee, a priori on ne va plus beaucoup améliorer le support malgré les possibilités que l'on a, pour des raisons que j'expliquerai d'ici quelques jours. En revanche, un support niveau noyau et driver (libre en tout cas, pour le proprio je reviendrais là-dessus aussi) est en passe d'arriver, et devrait être bien en place d'ici l'an prochain, chez Ubuntu ça sera 13.04 a priori. Donc de ce côte tu n'attendras pas trop longtemps, contrairement à des gens comme moi qui ont ce problème depuis début 2010. En revanche, si tu n'as pas besoin d'une carte graphique dédiée, fais l'impasse, chez Asus dans les Zenbook Prime il y a des modèles sans qui sont très bien.
Hors ligne
#1871 Le 26/07/2012, à 10:24
- alexmic
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
IL est vraiment bien ce sujet, et le premier post fourmille d'informations, mais je crois vraiment que tout ça devrait aussi apparaître dans le wiki.
Si une bonne ame en vacances a un peu de temps pour le faire
OMG Lawl pwnd rofl... Plaît-il?
Hors ligne
#1872 Le 26/07/2012, à 13:17
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Euh il manque quoi dans le Wiki ? Je croyais avoir tout mis...
Hors ligne
#1873 Le 26/07/2012, à 15:59
- alexmic
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
oups rien du tout, j'avais pas vu la page bumblebee
j'étais allé sur la page nvidia_optimus (très dense). Ta page y est bien linkée, donc je n'ai rien dit
OMG Lawl pwnd rofl... Plaît-il?
Hors ligne
#1874 Le 26/07/2012, à 18:06
- K4z
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Un grand bravo et merci pour la documentation et le travail fournit.
J'envisageais d'acheter une machine vu les prix très intéressants en ce moment, mais j'avais bien souvenir que Linus avait fait quelques remarques sur cette technologie. A lire la doc, je vois qu'en plus, il risque d'y avoir des problèmes avec le port HDMI, c'est vraiment contraignant
Mon utilisation est plutôt simple, bureau par défaut en 12.04 sous Unity 3D, lecture et encodage de contenus HD. A coté, il est important pour moi de pouvoir me brancher sur un écran ou un projecteur avec ce poste (En vga ou en hdmi du coup). J'envisageais une configuration comme ça car Steam débarque et je voulais pouvoir au passage faire quelques parties si l'envie m'en prenait. Comme l'impression que sur la base du simple fait de faire mes présentations avec ce poste, je ferais mieux de me retourner vers une config plus simple avec un chipset graphique intel tout bête et envisager de ne pas faire de jeux
Juste une question, je vois un poste en i7 QM, qui n'est a priori par concerné par cette technologie, il y a t'il une raison à cela ? Je trouve un peu bizarre que sur les processeurs les plus puissants, cette technologie ne soit "visiblement" pas là. Pour le coup, la carte graphique est très correcte ! Ce qui pourrait être une bon compromis pour mon achat !!!
Le poste en question est celui-ci: http://www.cdiscount.com/informatique/o … y054v.html
Dernière modification par K4z (Le 26/07/2012, à 18:30)
Hors ligne
#1875 Le 26/07/2012, à 19:10
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Le lien que tu donnes n'est pas un i7 QM, mais il est vrai que certains i7 QM ne sont pas concernés, mais mieux vaut pouvoir tester ou vérifier l'information pour chaque modèle dans ce cas.
D'autre part, le premier jeu arrivant sous Linux avec Steam est L4D2, et apparemment les développeurs Valve et Intel travaillent main dans la main pour optimiser les performances sur ce matériel. Donc si le HDMI est vraiment important, mieux vaut se rabattre sur du Intel only pour le moment. Sauf si tu as la possibilité de tester, car de rares PC Optimus ont la sortie HDMI sur la carte Intel (le mien par exemple, ce qui explique pourquoi je n'ai jamais pu m'occuper de cette fonctionnalité).
Hors ligne