Demon de volume xfce!(RESOLU)

Ironwind25 · Le 14/08/2012, à 02:05

Salut a tous,

ET bien par chez nous on dit que une image vaut mille mots:
xfce

Et le bug que sa l'apporte c'est que au demarrage d'une nouvelle session pour une premiere fois sa ne fonctionne jamais pour me logger faut toujours que je ferme a la main et que je repart a la main sur ma tour pour me logger sur mon compte!A la deuxieme fois sa fonctionne bien!

Merci a tous de votre temps!=D

Dernière modification par Ironwind25 (Le 06/10/2012, à 01:38)

adjoint · Le 14/08/2012, à 09:02

Salut,

Juste après le démarrage de ton ordi, tape dans le terminal

dmesg

et colle nous le résultat

Ironwind25 · Le 14/08/2012, à 20:08

SAlut adjoint voici le resultat

[    1.058201] ACPI: No dock devices found.
[    1.058203] HEST: Table not found.
[    1.058205] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.058263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.058377] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.058379] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.058381] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.058382] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    1.058384] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    1.058385] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    1.058399] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[    1.058447] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.058450] pci 0000:00:00.0: PME# disabled
[    1.058469] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[    1.058519] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.058522] pci 0000:00:01.0: PME# disabled
[    1.058540] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[    1.058590] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    1.058592] pci 0000:00:03.0: PME# disabled
[    1.058613] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[    1.058662] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    1.058665] pci 0000:00:07.0: PME# disabled
[    1.058687] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[    1.058746] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[    1.058803] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[    1.058858] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
[    1.058913] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[    1.058951] pci 0000:00:1a.0: reg 20: [io  0x9800-0x981f]
[    1.058997] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[    1.059034] pci 0000:00:1a.1: reg 20: [io  0x9880-0x989f]
[    1.059080] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[    1.059117] pci 0000:00:1a.2: reg 20: [io  0x9c00-0x9c1f]
[    1.059171] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[    1.059189] pci 0000:00:1a.7: reg 10: [mem 0xfb7ff000-0xfb7ff3ff]
[    1.059271] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    1.059275] pci 0000:00:1a.7: PME# disabled
[    1.059295] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[    1.059308] pci 0000:00:1b.0: reg 10: [mem 0xfb7f8000-0xfb7fbfff 64bit]
[    1.059368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.059371] pci 0000:00:1b.0: PME# disabled
[    1.059388] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[    1.059449] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.059452] pci 0000:00:1c.0: PME# disabled
[    1.059471] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
[    1.059532] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.059535] pci 0000:00:1c.1: PME# disabled
[    1.059553] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
[    1.059615] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.059618] pci 0000:00:1c.2: PME# disabled
[    1.059637] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[    1.059699] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.059702] pci 0000:00:1c.3: PME# disabled
[    1.059720] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[    1.059781] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.059784] pci 0000:00:1c.4: PME# disabled
[    1.059805] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[    1.059843] pci 0000:00:1d.0: reg 20: [io  0x9080-0x909f]
[    1.059890] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[    1.059927] pci 0000:00:1d.1: reg 20: [io  0x9400-0x941f]
[    1.059973] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[    1.060010] pci 0000:00:1d.2: reg 20: [io  0x9480-0x949f]
[    1.060065] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[    1.060084] pci 0000:00:1d.7: reg 10: [mem 0xfb7fe000-0xfb7fe3ff]
[    1.060166] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.060169] pci 0000:00:1d.7: PME# disabled
[    1.060185] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    1.060240] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[    1.060314] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    1.060318] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    1.060360] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[    1.060373] pci 0000:00:1f.2: reg 10: [io  0x8000-0x8007]
[    1.060380] pci 0000:00:1f.2: reg 14: [io  0x7c00-0x7c03]
[    1.060386] pci 0000:00:1f.2: reg 18: [io  0x7880-0x7887]
[    1.060393] pci 0000:00:1f.2: reg 1c: [io  0x7800-0x7803]
[    1.060400] pci 0000:00:1f.2: reg 20: [io  0x7480-0x748f]
[    1.060406] pci 0000:00:1f.2: reg 24: [io  0x7400-0x740f]
[    1.060447] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[    1.060460] pci 0000:00:1f.3: reg 10: [mem 0xfb7fd000-0xfb7fd0ff 64bit]
[    1.060478] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    1.060507] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[    1.060520] pci 0000:00:1f.5: reg 10: [io  0x9000-0x9007]
[    1.060527] pci 0000:00:1f.5: reg 14: [io  0x8c00-0x8c03]
[    1.060534] pci 0000:00:1f.5: reg 18: [io  0x8880-0x8887]
[    1.060540] pci 0000:00:1f.5: reg 1c: [io  0x8800-0x8803]
[    1.060547] pci 0000:00:1f.5: reg 20: [io  0x8480-0x848f]
[    1.060554] pci 0000:00:1f.5: reg 24: [io  0x8400-0x840f]
[    1.060631] pci 0000:01:00.0: [1033:0125] type 1 class 0x000604
[    1.060709] pci 0000:01:00.0: supports D1
[    1.060710] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.060714] pci 0000:01:00.0: PME# disabled
[    1.060737] pci 0000:01:00.1: [1033:0125] type 1 class 0x000604
[    1.060756] pci 0000:01:00.1: reg 10: [mem 0xfb8ffc00-0xfb8ffc7f 64bit]
[    1.060826] pci 0000:01:00.1: supports D1
[    1.060828] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
[    1.060831] pci 0000:01:00.1: PME# disabled
[    1.060855] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.060866] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    1.060870] pci 0000:00:01.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    1.060874] pci 0000:00:01.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.060945] pci 0000:01:00.0: PCI bridge to [bus 03-03]
[    1.061038] pci 0000:01:00.1: PCI bridge to [bus 02-02]
[    1.061051] pci 0000:01:00.1:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.061101] pci 0000:04:00.0: [1002:9440] type 0 class 0x000300
[    1.061112] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.061122] pci 0000:04:00.0: reg 18: [mem 0xfb9e0000-0xfb9effff 64bit]
[    1.061128] pci 0000:04:00.0: reg 20: [io  0xa000-0xa0ff]
[    1.061139] pci 0000:04:00.0: reg 30: [mem 0xfb9c0000-0xfb9dffff pref]
[    1.061167] pci 0000:04:00.0: supports D1 D2
[    1.061184] pci 0000:04:00.1: [1002:aa30] type 0 class 0x000403
[    1.061196] pci 0000:04:00.1: reg 10: [mem 0xfb9fc000-0xfb9fffff 64bit]
[    1.061248] pci 0000:04:00.1: supports D1 D2
[    1.065973] pci 0000:00:03.0: PCI bridge to [bus 04-04]
[    1.065975] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    1.065978] pci 0000:00:03.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    1.065982] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.066013] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    1.066052] pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
[    1.066060] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    1.066112] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
[    1.066127] pci 0000:09:00.0: reg 10: [io  0xe800-0xe8ff]
[    1.066153] pci 0000:09:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit]
[    1.066170] pci 0000:09:00.0: reg 20: [mem 0xfaef0000-0xfaefffff 64bit pref]
[    1.066181] pci 0000:09:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[    1.066242] pci 0000:09:00.0: supports D1 D2
[    1.066243] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.066247] pci 0000:09:00.0: PME# disabled
[    1.073971] pci 0000:00:1c.1: PCI bridge to [bus 09-09]
[    1.073975] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.073978] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    1.073982] pci 0000:00:1c.1:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
[    1.074037] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
[    1.074052] pci 0000:08:00.0: reg 10: [io  0xd800-0xd8ff]
[    1.074079] pci 0000:08:00.0: reg 18: [mem 0xfbcff000-0xfbcfffff 64bit]
[    1.074095] pci 0000:08:00.0: reg 20: [mem 0xfadf0000-0xfadfffff 64bit pref]
[    1.074106] pci 0000:08:00.0: reg 30: [mem 0xfbcc0000-0xfbcdffff pref]
[    1.074167] pci 0000:08:00.0: supports D1 D2
[    1.074169] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.074173] pci 0000:08:00.0: PME# disabled
[    1.081966] pci 0000:00:1c.2: PCI bridge to [bus 08-08]
[    1.081970] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    1.081973] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    1.081978] pci 0000:00:1c.2:   bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
[    1.082030] pci 0000:07:00.0: [11ab:6121] type 0 class 0x000101
[    1.082046] pci 0000:07:00.0: reg 10: [io  0xcc00-0xcc07]
[    1.082056] pci 0000:07:00.0: reg 14: [io  0xc880-0xc883]
[    1.082067] pci 0000:07:00.0: reg 18: [io  0xc800-0xc807]
[    1.082078] pci 0000:07:00.0: reg 1c: [io  0xc480-0xc483]
[    1.082089] pci 0000:07:00.0: reg 20: [io  0xc400-0xc40f]
[    1.082099] pci 0000:07:00.0: reg 24: [mem 0xfbbffc00-0xfbbfffff]
[    1.082161] pci 0000:07:00.0: supports D1
[    1.082163] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[    1.082167] pci 0000:07:00.0: PME# disabled
[    1.082183] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.082190] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[    1.082193] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    1.082196] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    1.082250] pci 0000:06:00.0: [11ab:6440] type 0 class 0x000104
[    1.082284] pci 0000:06:00.0: reg 18: [io  0xbc00-0xbc7f]
[    1.082310] pci 0000:06:00.0: reg 20: [mem 0xfbaff000-0xfbafffff 64bit]
[    1.082321] pci 0000:06:00.0: reg 30: [mem 0xfba80000-0xfbabffff pref]
[    1.082371] pci 0000:06:00.0: supports D1
[    1.082372] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    1.082376] pci 0000:06:00.0: PME# disabled
[    1.082391] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.082399] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    1.082402] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    1.082405] pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
[    1.082439] pci 0000:0b:04.0: [11c1:5811] type 0 class 0x000c00
[    1.082454] pci 0000:0b:04.0: reg 10: [mem 0xfbeff000-0xfbefffff]
[    1.082521] pci 0000:0b:04.0: supports D1 D2
[    1.082523] pci 0000:0b:04.0: PME# supported from D0 D1 D2 D3hot
[    1.082526] pci 0000:0b:04.0: PME# disabled
[    1.082561] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[    1.082566] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    1.082571] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.082573] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.082574] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.082576] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    1.082578] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    1.082579] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    1.082611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.082774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.082824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    1.082844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    1.082863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    1.082881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    1.082900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    1.082920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[    1.082939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1.PXHA._PRT]
[    1.082975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[    1.082994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[    1.083014]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.083016]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.083017] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.091798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    1.091830] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    1.091858] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    1.091888] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    1.091918] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    1.091949] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    1.091979] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    1.092009] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[    1.092095] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.092098] vgaarb: loaded
[    1.092099] vgaarb: bridge control possible 0000:04:00.0
[    1.092166] i2c-core: driver [aat2870] using legacy suspend method
[    1.092167] i2c-core: driver [aat2870] using legacy resume method
[    1.092213] SCSI subsystem initialized
[    1.092253] libata version 3.00 loaded.
[    1.092287] usbcore: registered new interface driver usbfs
[    1.092293] usbcore: registered new interface driver hub
[    1.092308] usbcore: registered new device driver usb
[    1.092367] PCI: Using ACPI for IRQ routing
[    1.097863] PCI: Discovered peer bus ff
[    1.097888] pci 0000:ff:00.0: [8086:2c41] type 0 class 0x000600
[    1.097904] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600
[    1.097920] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600
[    1.097933] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600
[    1.097952] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600
[    1.097966] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600
[    1.097979] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600
[    1.097994] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600
[    1.098007] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600
[    1.098020] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600
[    1.098034] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600
[    1.098049] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600
[    1.098062] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600
[    1.098076] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600
[    1.098089] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600
[    1.098104] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600
[    1.098117] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600
[    1.098130] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600
[    1.098144] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600
[    1.098467] PCI: pci_cache_line_size set to 64 bytes
[    1.098580] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    1.098582] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
[    1.098650] NetLabel: Initializing
[    1.098651] NetLabel:  domain hash size = 128
[    1.098652] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.098659] NetLabel:  unlabeled traffic allowed by default
[    1.098693] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    1.098697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.098700] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.118025] Switching to clocksource hpet
[    1.122541] AppArmor: AppArmor Filesystem Enabled
[    1.122560] pnp: PnP ACPI init
[    1.122571] ACPI: bus type pnp registered
[    1.122654] pnp 00:00: [bus 00-ff]
[    1.122655] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.122657] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.122658] pnp 00:00: [io  0x0d00-0xffff window]
[    1.122660] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.122661] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    1.122662] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    1.122664] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    1.122711] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.122718] pnp 00:01: [mem 0xfbf00000-0xfbffffff]
[    1.122719] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    1.122721] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    1.122724] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    1.122725] pnp 00:01: [mem 0xfec8a000-0xfec8afff]
[    1.122726] pnp 00:01: [mem 0xfed10000-0xfed10fff]
[    1.122774] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[    1.122776] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    1.122778] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    1.122780] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    1.122781] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[    1.122783] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[    1.122785] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.122814] pnp 00:02: [dma 4]
[    1.122815] pnp 00:02: [io  0x0000-0x000f]
[    1.122816] pnp 00:02: [io  0x0081-0x0083]
[    1.122817] pnp 00:02: [io  0x0087]
[    1.122818] pnp 00:02: [io  0x0089-0x008b]
[    1.122820] pnp 00:02: [io  0x008f]
[    1.122821] pnp 00:02: [io  0x00c0-0x00df]
[    1.122840] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.122847] pnp 00:03: [io  0x0070-0x0071]
[    1.122855] pnp 00:03: [irq 8]
[    1.122873] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.122879] pnp 00:04: [io  0x0061]
[    1.122895] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.122901] pnp 00:05: [io  0x00f0-0x00ff]
[    1.122905] pnp 00:05: [irq 13]
[    1.122923] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.122967] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    1.122969] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    1.122970] pnp 00:06: [io  0x0290-0x029f]
[    1.123011] system 00:06: [io  0x0290-0x029f] has been reserved
[    1.123014] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.123103] pnp 00:07: [io  0x0010-0x001f]
[    1.123104] pnp 00:07: [io  0x0022-0x003f]
[    1.123105] pnp 00:07: [io  0x0044-0x004d]
[    1.123107] pnp 00:07: [io  0x0050-0x005f]
[    1.123108] pnp 00:07: [io  0x0062-0x0063]
[    1.123109] pnp 00:07: [io  0x0065-0x006f]
[    1.123110] pnp 00:07: [io  0x0072-0x007f]
[    1.123111] pnp 00:07: [io  0x0080]
[    1.123112] pnp 00:07: [io  0x0084-0x0086]
[    1.123113] pnp 00:07: [io  0x0088]
[    1.123114] pnp 00:07: [io  0x008c-0x008e]
[    1.123116] pnp 00:07: [io  0x0090-0x009f]
[    1.123117] pnp 00:07: [io  0x00a2-0x00bf]
[    1.123118] pnp 00:07: [io  0x00e0-0x00ef]
[    1.123119] pnp 00:07: [io  0x04d0-0x04d1]
[    1.123120] pnp 00:07: [io  0x0800-0x087f]
[    1.123121] pnp 00:07: [io  0x0400-0x03ff disabled]
[    1.123123] pnp 00:07: [io  0x0500-0x057f]
[    1.123124] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    1.123125] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[    1.123126] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[    1.123185] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    1.123187] system 00:07: [io  0x0800-0x087f] has been reserved
[    1.123189] system 00:07: [io  0x0500-0x057f] has been reserved
[    1.123191] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.123193] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.123194] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[    1.123197] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.123241] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    1.123263] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.123294] pnp 00:09: [mem 0xffa00000-0xffbfffff]
[    1.123295] pnp 00:09: [mem 0xffe00000-0xffffffff]
[    1.123318] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[    1.123345] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
[    1.123384] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[    1.123386] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.123437] pnp 00:0b: [io  0x0060]
[    1.123438] pnp 00:0b: [io  0x0064]
[    1.123439] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    1.123441] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    1.123483] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.123485] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.123487] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.123536] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    1.123578] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    1.123580] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.123685] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    1.123687] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    1.123688] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    1.123689] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[    1.123691] pnp 00:0d: [mem 0xfed90000-0xffffffff]
[    1.123740] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.123742] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    1.123744] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.123745] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[    1.123747] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[    1.123749] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.123834] pnp: PnP ACPI: found 14 devices
[    1.123835] ACPI: ACPI bus type pnp unregistered
[    1.129866] PCI: max bus depth: 2 pci_try_num: 3
[    1.129936] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.129938] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    1.129940] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
[    1.129942] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    1.129944] pci 0000:01:00.0: PCI bridge to [bus 03-03]
[    1.129957] pci 0000:01:00.1: PCI bridge to [bus 02-02]
[    1.129965] pci 0000:01:00.1:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.129971] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    1.129975] pci 0000:00:01.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    1.129977] pci 0000:00:01.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.129982] pci 0000:00:03.0: PCI bridge to [bus 04-04]
[    1.129984] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    1.129987] pci 0000:00:03.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    1.129990] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.129994] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    1.130001] pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
[    1.130003] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    1.130012] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc07fffff]
[    1.130015] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    1.130020] pci 0000:00:1c.1: PCI bridge to [bus 09-09]
[    1.130022] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.130026] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    1.130029] pci 0000:00:1c.1:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
[    1.130033] pci 0000:00:1c.2: PCI bridge to [bus 08-08]
[    1.130035] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    1.130039] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    1.130042] pci 0000:00:1c.2:   bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
[    1.130047] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[    1.130049] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    1.130052] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    1.130055] pci 0000:00:1c.3:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    1.130060] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    1.130062] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    1.130066] pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
[    1.130069] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.130073] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[    1.130077] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    1.130089] pci 0000:00:01.0: setting latency timer to 64
[    1.130096] pci 0000:01:00.0: setting latency timer to 64
[    1.130111] pci 0000:01:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[    1.130114] pci 0000:01:00.1: setting latency timer to 64
[    1.130120] pci 0000:00:03.0: setting latency timer to 64
[    1.130125] pci 0000:00:07.0: setting latency timer to 64
[    1.130129] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    1.130135] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.130138] pci 0000:00:1c.0: setting latency timer to 64
[    1.130146] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.130148] pci 0000:00:1c.1: setting latency timer to 64
[    1.130156] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.130159] pci 0000:00:1c.2: setting latency timer to 64
[    1.130169] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.130172] pci 0000:00:1c.3: setting latency timer to 64
[    1.130177] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.130180] pci 0000:00:1c.4: setting latency timer to 64
[    1.130185] pci 0000:00:1e.0: setting latency timer to 64
[    1.130188] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.130190] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.130191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.130193] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    1.130194] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    1.130195] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    1.130197] pci_bus 0000:01: resource 1 [mem 0xfb800000-0xfb8fffff]
[    1.130199] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.130201] pci_bus 0000:02: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.130203] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    1.130204] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
[    1.130206] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.130208] pci_bus 0000:0a: resource 0 [io  0x1000-0x1fff]
[    1.130210] pci_bus 0000:0a: resource 1 [mem 0xc0400000-0xc07fffff]
[    1.130212] pci_bus 0000:0a: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    1.130213] pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
[    1.130215] pci_bus 0000:09: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    1.130217] pci_bus 0000:09: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
[    1.130219] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    1.130220] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    1.130222] pci_bus 0000:08: resource 2 [mem 0xfad00000-0xfadfffff 64bit pref]
[    1.130224] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
[    1.130226] pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    1.130228] pci_bus 0000:07: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    1.130229] pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
[    1.130231] pci_bus 0000:06: resource 1 [mem 0xfba00000-0xfbafffff]
[    1.130233] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.130235] pci_bus 0000:0b: resource 1 [mem 0xfbe00000-0xfbefffff]
[    1.130237] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
[    1.130238] pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff]
[    1.130240] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
[    1.130242] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000dffff]
[    1.130243] pci_bus 0000:0b: resource 8 [mem 0xc0000000-0xdfffffff]
[    1.130245] pci_bus 0000:0b: resource 9 [mem 0xf0000000-0xfed8ffff]
[    1.130247] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    1.130248] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    1.130277] NET: Registered protocol family 2
[    1.130554] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    1.131512] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.132658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.132785] TCP: Hash tables configured (established 524288 bind 65536)
[    1.132787] TCP reno registered
[    1.132805] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.132858] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.132969] NET: Registered protocol family 1
[    1.132997] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.133013] pci 0000:00:1a.0: PCI INT A disabled
[    1.133024] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.133039] pci 0000:00:1a.1: PCI INT B disabled
[    1.133044] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.133058] pci 0000:00:1a.2: PCI INT D disabled
[    1.133064] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.133088] pci 0000:00:1a.7: PCI INT C disabled
[    1.133106] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.133121] pci 0000:00:1d.0: PCI INT A disabled
[    1.133126] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.133140] pci 0000:00:1d.1: PCI INT B disabled
[    1.133145] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.133159] pci 0000:00:1d.2: PCI INT C disabled
[    1.133166] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.133191] pci 0000:00:1d.7: PCI INT A disabled
[    1.133208] pci 0000:04:00.0: Boot video device
[    1.133240] PCI: CLS 256 bytes, default 64
[    1.133241] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.133243] Placing 64MB software IO TLB between ffff8800bb772000 - ffff8800bf772000
[    1.133244] software IO TLB at phys 0xbb772000 - 0xbf772000
[    1.133732] audit: initializing netlink socket (disabled)
[    1.133738] type=2000 audit(1344966835.868:1): initialized
[    1.166976] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.201430] VFS: Disk quotas dquot_6.5.2
[    1.201474] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.201841] fuse init (API version 7.17)
[    1.201903] msgmni has been set to 23970
[    1.202158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.202176] io scheduler noop registered
[    1.202177] io scheduler deadline registered
[    1.202200] io scheduler cfq registered (default)
[    1.202393] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.202430] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[    1.202477] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.202511] pcieport 0000:00:1c.1: irq 65 for MSI/MSI-X
[    1.202557] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.202588] pcieport 0000:00:1c.2: irq 66 for MSI/MSI-X
[    1.202634] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.202665] pcieport 0000:00:1c.3: irq 67 for MSI/MSI-X
[    1.202710] pcieport 0000:00:1c.4: setting latency timer to 64
[    1.202743] pcieport 0000:00:1c.4: irq 68 for MSI/MSI-X
[    1.202809] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.202825] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.202866] intel_idle: MWAIT substates: 0x1120
[    1.202874] intel_idle: v0.4 model 0x1A
[    1.202875] intel_idle: lapic_timer_reliable_states 0x2
[    1.202961] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.202965] ACPI: Power Button [PWRB]
[    1.202993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.202995] ACPI: Power Button [PWRF]
[    1.203943] ERST: Table is not found!
[    1.203945] GHES: HEST is not enabled!
[    1.203992] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.224334] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.303324] Freeing initrd memory: 20492k freed
[    1.426366] Linux agpgart interface v0.103
[    1.427428] brd: module loaded
[    1.427950] loop: module loaded
[    1.428044] ahci 0000:07:00.0: version 3.0
[    1.428082] ata_piix 0000:00:1f.2: version 2.13
[    1.428092] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.428096] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.428124] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.428322] scsi0 : ata_piix
[    1.428371] scsi1 : ata_piix
[    1.428975] ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
[    1.428980] ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
[    1.428992] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.428996] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.429021] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.429150] scsi2 : ata_piix
[    1.429195] scsi3 : ata_piix
[    1.429720] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[    1.429723] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[    1.429762] pata_acpi 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.429778] pata_acpi 0000:07:00.0: setting latency timer to 64
[    1.429789] pata_acpi 0000:07:00.0: PCI INT A disabled
[    1.429988] Fixed MDIO Bus: probed
[    1.430001] tun: Universal TUN/TAP device driver, 1.6
[    1.430002] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.430035] PPP generic driver version 2.4.2
[    1.430095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.430106] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.430128] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.430130] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.430162] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.430184] ehci_hcd 0000:00:1a.7: debug port 1
[    1.434060] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[    1.434071] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb7ff000
[    1.449869] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.449977] hub 1-0:1.0: USB hub found
[    1.449981] hub 1-0:1.0: 6 ports detected
[    1.450045] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.450055] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.450057] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.450085] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.450103] ehci_hcd 0000:00:1d.7: debug port 1
[    1.453978] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[    1.453989] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb7fe000
[    1.469859] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.469968] hub 2-0:1.0: USB hub found
[    1.469971] hub 2-0:1.0: 6 ports detected
[    1.470026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.470036] uhci_hcd: USB Universal Host Controller Interface driver
[    1.470047] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.470053] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.470055] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.470081] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.470108] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[    1.470187] hub 3-0:1.0: USB hub found
[    1.470189] hub 3-0:1.0: 2 ports detected
[    1.470239] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.470245] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.470247] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.470277] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.470304] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[    1.470385] hub 4-0:1.0: USB hub found
[    1.470388] hub 4-0:1.0: 2 ports detected
[    1.470436] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.470441] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.470443] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.470469] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.470489] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[    1.470566] hub 5-0:1.0: USB hub found
[    1.470568] hub 5-0:1.0: 2 ports detected
[    1.470616] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.470622] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.470624] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.470649] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.470670] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[    1.470745] hub 6-0:1.0: USB hub found
[    1.470747] hub 6-0:1.0: 2 ports detected
[    1.470795] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.470800] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.470802] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.470829] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.470849] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[    1.470926] hub 7-0:1.0: USB hub found
[    1.470929] hub 7-0:1.0: 2 ports detected
[    1.470977] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.470982] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.470984] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.471009] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.471029] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[    1.471111] hub 8-0:1.0: USB hub found
[    1.471114] hub 8-0:1.0: 2 ports detected
[    1.471201] usbcore: registered new interface driver libusual
[    1.471226] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.473999] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.474004] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.474085] mousedev: PS/2 mouse device common for all mice
[    1.474178] rtc_cmos 00:03: RTC can wake from S4
[    1.474259] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.474282] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.474334] device-mapper: uevent: version 1.0.3
[    1.474378] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.474511] cpuidle: using governor ladder
[    1.474709] cpuidle: using governor menu
[    1.474710] EFI Variables Facility v0.08 2004-May-17
[    1.474868] TCP cubic registered
[    1.474936] NET: Registered protocol family 10
[    1.475272] NET: Registered protocol family 17
[    1.475275] Registering the dns_resolver key type
[    1.475384] PM: Hibernation image not present or could not be loaded.
[    1.475393] registered taskstats version 1
[    1.498115]   Magic number: 8:207:896
[    1.498478] rtc_cmos 00:03: setting system clock to 2012-08-14 17:53:57 UTC (1344966837)
[    1.500581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.500582] EDD information not available.
[    1.756631] ata3: SATA link down (SStatus 0 SControl 300)
[    1.767303] ata4: SATA link down (SStatus 0 SControl 300)
[    1.767382] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.901234] Initializing USB Mass Storage driver...
[    1.901518] scsi4 : usb-storage 1-2:1.0
[    1.901599] usbcore: registered new interface driver usb-storage
[    1.901600] USB Mass Storage support registered.
[    2.076447] ata1.00: SATA link down (SStatus 0 SControl 300)
[    2.076459] ata1.01: SATA link down (SStatus 0 SControl 300)
[    2.129617] Refined TSC clocksource calibration: 3073.635 MHz.
[    2.129622] Switching to clocksource tsc
[    2.229675] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.229688] ata2.01: SATA link down (SStatus 0 SControl 300)
[    2.238925] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    2.238930] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254045] ata2.00: configured for UDMA/133
[    2.254363] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[    2.254583] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.254637] sd 1:0:0:0: [sda] Write Protect is off
[    2.254641] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.254659] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.254688] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.288279]  sda: sda1 sda2 < sda5 >
[    2.289145] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.290407] Freeing unused kernel memory: 920k freed
[    2.290508] Write protecting the kernel read-only data: 12288k
[    2.295041] Freeing unused kernel memory: 1616k freed
[    2.298271] Freeing unused kernel memory: 1200k freed
[    2.316886] udevd[130]: starting version 175
[    2.328351] wmi: Mapper loaded
[    2.335854] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.335875] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.335908] r8169 0000:09:00.0: setting latency timer to 64
[    2.335964] r8169 0000:09:00.0: irq 69 for MSI/MSI-X
[    2.336382] r8169 0000:09:00.0: eth0: RTL8168c/8111c at 0xffffc9000187a000, 20:cf:30:f1:a3:f7, XID 1c4000c0 IRQ 69
[    2.336386] r8169 0000:09:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.336511] pata_marvell 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.336538] pata_marvell 0000:07:00.0: setting latency timer to 64
[    2.336821] mvsas 0000:06:00.0: mvsas: driver version 0.8.16
[    2.336830] mvsas 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.336836] mvsas 0000:06:00.0: setting latency timer to 64
[    2.337187] mvsas 0000:06:00.0: mvsas: PCI-E x1, Bandwidth Usage: 2.5 Gbps
[    2.337493] scsi6 : pata_marvell
[    2.338632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.338651] r8169 0000:08:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.338683] r8169 0000:08:00.0: setting latency timer to 64
[    2.338738] r8169 0000:08:00.0: irq 70 for MSI/MSI-X
[    2.338819] scsi7 : pata_marvell
[    2.338876] ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[    2.338879] ata6: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[    2.339138] r8169 0000:08:00.0: eth1: RTL8168c/8111c at 0xffffc9000187e000, 20:cf:30:f1:a2:56, XID 1c4000c0 IRQ 70
[    2.339141] r8169 0000:08:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.385521] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    2.644338] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2
[    2.644771] generic-usb 0003:12CF:0155.0001: input,hidraw0: USB HID v1.11 Mouse [DEXIN Corporation CM STORM SENTINEL GAMING MOUSE] on usb-0000:00:1d.0-1/input0
[    2.648298] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input3
[    2.648574] generic-usb 0003:12CF:0155.0002: input,hidraw1: USB HID v1.11 Keyboard [DEXIN Corporation CM STORM SENTINEL GAMING MOUSE] on usb-0000:00:1d.0-1/input1
[    2.648597] usbcore: registered new interface driver usbhid
[    2.648599] usbhid: USB HID core driver
[    2.674005] firewire_ohci 0000:0b:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.729551] firewire_ohci: Added fw-ohci device 0000:0b:04.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    2.833282] usb 6-2: new low-speed USB device number 3 using uhci_hcd
[    2.898447] scsi 4:0:0:0: Direct-Access     Seagate  Desktop          0130 PQ: 0 ANSI: 4
[    2.900280] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.901107] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.901782] sd 4:0:0:0: [sdb] Write Protect is off
[    2.901787] sd 4:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[    2.902529] sd 4:0:0:0: [sdb] No Caching mode page present
[    2.902533] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.904747] sd 4:0:0:0: [sdb] No Caching mode page present
[    2.904751] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.920553]  sdb: sdb1
[    2.927725] sd 4:0:0:0: [sdb] No Caching mode page present
[    2.927727] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.927729] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.032162] input: Chicony Eclipse Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
[    3.032407] generic-usb 0003:06A3:8018.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Eclipse Multimedia Keyboard] on usb-0000:00:1d.0-2/input0
[    3.062100] input: Chicony Eclipse Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5
[    3.062324] generic-usb 0003:06A3:8018.0004: input,hidraw3: USB HID v1.11 Device [Chicony Eclipse Multimedia Keyboard] on usb-0000:00:1d.0-2/input1
[    3.229400] firewire_core: created device fw0: GUID 001e8c000036093b, S400
[    4.576526] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 0 attach dev info is 0
[    4.576530] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 0 attach sas addr is 0
[    4.779633] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 1 attach dev info is 0
[    4.779635] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 1 attach sas addr is 1
[    4.880376] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 2 attach dev info is 0
[    4.880380] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 2 attach sas addr is 0
[    4.984331] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 3 attach dev info is 0
[    4.984336] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 3 attach sas addr is 0
[    4.984344] scsi5 : mvsas
[    4.985244] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
[    4.985385] sas: phy-5:1 added to port-5:0, phy_mask:0x2 ( 100000000000000)
[    4.985522] sas: DOING DISCOVERY on port 0, pid:77
[    4.993629] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1353:found dev[0:5] is gone.
[    4.993953] sas: Enter sas_scsi_recover_host
[    4.993957] ata7: sas eh calling libata port error handler
[    4.993964] sas: sas_ata_hard_reset: Found ATAPI device.
[    4.996987] ata7.00: ATAPI: HL-DT-ST BD-RE  BH10LS30, 1.00, max UDMA/133
[    5.000915] ata7.00: configured for UDMA/133
[    5.006622] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.006649] sas: --- Exit sas_scsi_recover_host
[    5.015794] scsi 5:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10LS30  1.00 PQ: 0 ANSI: 5
[    5.026729] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.026749] sas: Enter sas_scsi_recover_host
[    5.026752] ata7: sas eh calling libata cmd error handler
[    5.026758] ata7: sas eh calling libata port error handler
[    5.028387] sas: --- Exit sas_scsi_recover_host
[    5.036440] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.036444] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.036733] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    5.036926] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    5.037008] sas: DONE DISCOVERY on port 0, pid:77, result:0
[    5.057864] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.057886] sas: Enter sas_scsi_recover_host
[    5.057889] ata7: sas eh calling libata cmd error handler
[    5.057894] ata7: sas eh calling libata port error handler
[    5.059332] sas: --- Exit sas_scsi_recover_host
[    5.064513] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.064534] sas: Enter sas_scsi_recover_host
[    5.064537] ata7: sas eh calling libata cmd error handler
[    5.064542] ata7: sas eh calling libata port error handler
[    5.065978] sas: --- Exit sas_scsi_recover_host
[    5.078487] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.078508] sas: Enter sas_scsi_recover_host
[    5.078512] ata7: sas eh calling libata cmd error handler
[    5.078517] ata7: sas eh calling libata port error handler
[    5.079925] sas: --- Exit sas_scsi_recover_host
[    5.086654] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.086675] sas: Enter sas_scsi_recover_host
[    5.086679] ata7: sas eh calling libata cmd error handler
[    5.086684] ata7: sas eh calling libata port error handler
[    5.088093] sas: --- Exit sas_scsi_recover_host
[    5.100626] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.100648] sas: Enter sas_scsi_recover_host
[    5.100651] ata7: sas eh calling libata cmd error handler
[    5.100656] ata7: sas eh calling libata port error handler
[    5.102086] sas: --- Exit sas_scsi_recover_host
[    6.138141] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    6.138143] vesafb: scrolling: redraw
[    6.138145] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    6.143136] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90012c00000, using 5824k, total 5824k
[    6.143343] Console: switching to colour frame buffer device 175x65
[    6.143364] fb0: VESA VGA frame buffer device
[   11.716421] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.978927] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.978933] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.999131] udevd[428]: starting version 175
[   17.026691] EDAC MC: Ver: 2.1.0
[   17.028168] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
[   17.028182] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[   17.028188] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   17.028253] lp: driver loaded but no devices found
[   17.028340] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.034727] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   17.034731] Disabling lock debugging due to kernel taint
[   17.056493] type=1400 audit(1344966853.061:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=487 comm="apparmor_parser"
[   17.056511] type=1400 audit(1344966853.061:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[   17.056799] type=1400 audit(1344966853.061:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=487 comm="apparmor_parser"
[   17.056957] type=1400 audit(1344966853.061:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[   17.057008] type=1400 audit(1344966853.061:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser"
[   17.057133] [fglrx] Maximum main memory to use for locked dma buffers: 11704 MBytes.
[   17.057199] type=1400 audit(1344966853.061:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[   17.057726] [fglrx]   vendor: 1002 device: 9440 count: 1
[   17.058554] [fglrx] ioport: bar 4, base 0xa000, size: 0x100
[   17.058580] pci 0000:04:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[   17.058585] pci 0000:04:00.0: setting latency timer to 64
[   17.059047] [fglrx] Kernel PAT support is enabled
[   17.059064] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[   17.062837] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   17.062859] sas: Enter sas_scsi_recover_host
[   17.062862] ata7: sas eh calling libata cmd error handler
[   17.062868] ata7: sas eh calling libata port error handler
[   17.064287] sas: --- Exit sas_scsi_recover_host
[   17.064317] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   17.064366] snd_hda_intel 0000:00:1b.0: irq 71 for MSI/MSI-X
[   17.064388] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   17.069439] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   17.069457] sas: Enter sas_scsi_recover_host
[   17.069460] ata7: sas eh calling libata cmd error handler
[   17.069464] ata7: sas eh calling libata port error handler
[   17.070883] sas: --- Exit sas_scsi_recover_host
[   17.100109] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   17.100240] sas: Enter sas_scsi_recover_host
[   17.100244] ata7: sas eh calling libata cmd error handler
[   17.100249] ata7: sas eh calling libata port error handler
[   17.101574] sas: --- Exit sas_scsi_recover_host
[   17.114085] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   17.114103] sas: Enter sas_scsi_recover_host
[   17.114105] ata7: sas eh calling libata cmd error handler
[   17.114109] ata7: sas eh calling libata port error handler
[   17.115567] sas: --- Exit sas_scsi_recover_host
[   17.128073] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   17.128089] sas: Enter sas_scsi_recover_host
[   17.128091] ata7: sas eh calling libata cmd error handler
[   17.128096] ata7: sas eh calling libata port error handler
[   17.129554] sas: --- Exit sas_scsi_recover_host
[   17.284383] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.467514] init: failsafe main process (875) killed by TERM signal
[   17.467855] hda_codec: AD1989B: BIOS auto-probing.
[   17.470484] snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
[   17.470665] snd_hda_intel 0000:04:00.1: irq 72 for MSI/MSI-X
[   17.470687] snd_hda_intel 0000:04:00.1: setting latency timer to 64
[   17.489597] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   17.489655] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input6
[   17.665969] ppdev: user-space parallel port driver
[   17.667317] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[   17.667901] parport0: irq 7 detected
[   17.725330] Bluetooth: Core ver 2.16
[   17.725351] NET: Registered protocol family 31
[   17.725353] Bluetooth: HCI device and connection manager initialized
[   17.725355] Bluetooth: HCI socket layer initialized
[   17.725357] Bluetooth: L2CAP socket layer initialized
[   17.725362] Bluetooth: SCO socket layer initialized
[   17.726978] Bluetooth: RFCOMM TTY layer initialized
[   17.726982] Bluetooth: RFCOMM socket layer initialized
[   17.726984] Bluetooth: RFCOMM ver 1.11
[   17.728624] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.728626] Bluetooth: BNEP filters: protocol multicast
[   17.762600] lp0: using parport0 (polling).
[   17.767936] type=1400 audit(1344966853.773:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser"
[   17.768251] type=1400 audit(1344966853.773:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser"
[   17.812332] r8169 0000:09:00.0: eth0: link down
[   17.812339] r8169 0000:09:00.0: eth0: link down
[   17.813242] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.813501] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.819033] r8169 0000:08:00.0: eth1: link down
[   17.819872] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.820128] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.860426] type=1400 audit(1344966853.865:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=990 comm="apparmor_parser"
[   17.860435] type=1400 audit(1344966853.865:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=996 comm="apparmor_parser"
[   18.370204] fglrx_pci 0000:04:00.0: irq 73 for MSI/MSI-X
[   18.370829] [fglrx] Firegl kernel thread PID: 1338
[   18.371070] [fglrx] Firegl kernel thread PID: 1339
[   18.371257] [fglrx] Firegl kernel thread PID: 1340
[   18.371421] [fglrx] IRQ 73 Enabled
[   18.922359] Adding 12571644k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:12571644k 
[   19.560712] [fglrx] Gart USWC size:1280 M.
[   19.560714] [fglrx] Gart cacheable size:508 M.
[   19.560718] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   19.560719] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000 
[   19.560721] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000 
[   19.928515] r8169 0000:09:00.0: eth0: link up
[   19.929605] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   30.924164] eth0: no IPv6 routers present
[  354.341072] show_signal_msg: 39 callbacks suppressed
[  354.341078] accounts-daemon[1397]: segfault at b1 ip 00007fd34a4a9323 sp 00007fffeb613f60 error 4 in libdbus-1.so.3.5.8[7fd34a492000+42000]
ir0nw1nd@ir0nw1nd-System-Product-Name:~$

merci de votre temps!

Ironwind25 · Le 14/08/2012, à 22:05

Salut,

Et bien voila en désinstallant le paquet et en le réinstallant tout est rentrer das l’ordre magie!Merci adjoint je passe en résolu!

Mille merci!!!

Ironwind25 · Le 03/10/2012, à 14:05

Bonjour,

C,est quasiment genant de reposter ici mais bon.......faut ce qui faut!Comme vous pouver le voir j'ai deja poster pour ce probleme!L'action que j'avais fait auparavant en désinstallant le paquet avec fonctionner main maintenant rien a faire c'est de la grosse smoule!

Le probleme est revenue parce que je me suis fait une belle installation toute fraiche!

Alors..............au plaisir!

Merci de votre temps!

Tiens une petite image: bureau xfce

Et voici deja ce que donne dmesg:

[    1.068293] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    1.068296] pci 0000:00:1a.7: PME# disabled
[    1.068317] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[    1.068330] pci 0000:00:1b.0: reg 10: [mem 0xfb7f8000-0xfb7fbfff 64bit]
[    1.068390] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.068393] pci 0000:00:1b.0: PME# disabled
[    1.068409] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[    1.068471] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.068474] pci 0000:00:1c.0: PME# disabled
[    1.068492] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
[    1.068553] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.068556] pci 0000:00:1c.1: PME# disabled
[    1.068574] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
[    1.068635] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.068638] pci 0000:00:1c.2: PME# disabled
[    1.068658] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[    1.068719] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.068722] pci 0000:00:1c.3: PME# disabled
[    1.068740] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[    1.068801] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.068804] pci 0000:00:1c.4: PME# disabled
[    1.068825] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[    1.068863] pci 0000:00:1d.0: reg 20: [io  0x9080-0x909f]
[    1.068908] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[    1.068945] pci 0000:00:1d.1: reg 20: [io  0x9400-0x941f]
[    1.068990] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[    1.069028] pci 0000:00:1d.2: reg 20: [io  0x9480-0x949f]
[    1.069081] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[    1.069099] pci 0000:00:1d.7: reg 10: [mem 0xfb7fe000-0xfb7fe3ff]
[    1.069181] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.069184] pci 0000:00:1d.7: PME# disabled
[    1.069200] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    1.069255] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[    1.069329] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    1.069332] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    1.069374] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[    1.069387] pci 0000:00:1f.2: reg 10: [io  0x8000-0x8007]
[    1.069394] pci 0000:00:1f.2: reg 14: [io  0x7c00-0x7c03]
[    1.069400] pci 0000:00:1f.2: reg 18: [io  0x7880-0x7887]
[    1.069407] pci 0000:00:1f.2: reg 1c: [io  0x7800-0x7803]
[    1.069414] pci 0000:00:1f.2: reg 20: [io  0x7480-0x748f]
[    1.069420] pci 0000:00:1f.2: reg 24: [io  0x7400-0x740f]
[    1.069461] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[    1.069474] pci 0000:00:1f.3: reg 10: [mem 0xfb7fd000-0xfb7fd0ff 64bit]
[    1.069492] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    1.069521] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[    1.069534] pci 0000:00:1f.5: reg 10: [io  0x9000-0x9007]
[    1.069541] pci 0000:00:1f.5: reg 14: [io  0x8c00-0x8c03]
[    1.069548] pci 0000:00:1f.5: reg 18: [io  0x8880-0x8887]
[    1.069554] pci 0000:00:1f.5: reg 1c: [io  0x8800-0x8803]
[    1.069561] pci 0000:00:1f.5: reg 20: [io  0x8480-0x848f]
[    1.069568] pci 0000:00:1f.5: reg 24: [io  0x8400-0x840f]
[    1.069645] pci 0000:01:00.0: [1033:0125] type 1 class 0x000604
[    1.069722] pci 0000:01:00.0: supports D1
[    1.069724] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.069727] pci 0000:01:00.0: PME# disabled
[    1.069750] pci 0000:01:00.1: [1033:0125] type 1 class 0x000604
[    1.069769] pci 0000:01:00.1: reg 10: [mem 0xfb8ffc00-0xfb8ffc7f 64bit]
[    1.069840] pci 0000:01:00.1: supports D1
[    1.069842] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
[    1.069845] pci 0000:01:00.1: PME# disabled
[    1.069869] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.069880] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    1.069884] pci 0000:00:01.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    1.069888] pci 0000:00:01.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.069963] pci 0000:01:00.0: PCI bridge to [bus 03-03]
[    1.070056] pci 0000:01:00.1: PCI bridge to [bus 02-02]
[    1.070069] pci 0000:01:00.1:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.070120] pci 0000:04:00.0: [1002:9440] type 0 class 0x000300
[    1.070132] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.070141] pci 0000:04:00.0: reg 18: [mem 0xfb9e0000-0xfb9effff 64bit]
[    1.070148] pci 0000:04:00.0: reg 20: [io  0xa000-0xa0ff]
[    1.070159] pci 0000:04:00.0: reg 30: [mem 0xfb9c0000-0xfb9dffff pref]
[    1.070187] pci 0000:04:00.0: supports D1 D2
[    1.070204] pci 0000:04:00.1: [1002:aa30] type 0 class 0x000403
[    1.070216] pci 0000:04:00.1: reg 10: [mem 0xfb9fc000-0xfb9fffff 64bit]
[    1.070269] pci 0000:04:00.1: supports D1 D2
[    1.077965] pci 0000:00:03.0: PCI bridge to [bus 04-04]
[    1.077967] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    1.077970] pci 0000:00:03.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    1.077974] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.078005] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    1.078044] pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
[    1.078052] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    1.078104] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
[    1.078119] pci 0000:09:00.0: reg 10: [io  0xe800-0xe8ff]
[    1.078145] pci 0000:09:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit]
[    1.078161] pci 0000:09:00.0: reg 20: [mem 0xfaef0000-0xfaefffff 64bit pref]
[    1.078172] pci 0000:09:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[    1.078233] pci 0000:09:00.0: supports D1 D2
[    1.078234] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.078238] pci 0000:09:00.0: PME# disabled
[    1.085961] pci 0000:00:1c.1: PCI bridge to [bus 09-09]
[    1.085964] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.085967] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    1.085971] pci 0000:00:1c.1:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
[    1.086026] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
[    1.086041] pci 0000:08:00.0: reg 10: [io  0xd800-0xd8ff]
[    1.086068] pci 0000:08:00.0: reg 18: [mem 0xfbcff000-0xfbcfffff 64bit]
[    1.086084] pci 0000:08:00.0: reg 20: [mem 0xfadf0000-0xfadfffff 64bit pref]
[    1.086095] pci 0000:08:00.0: reg 30: [mem 0xfbcc0000-0xfbcdffff pref]
[    1.086156] pci 0000:08:00.0: supports D1 D2
[    1.086158] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.086162] pci 0000:08:00.0: PME# disabled
[    1.093958] pci 0000:00:1c.2: PCI bridge to [bus 08-08]
[    1.093961] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    1.093964] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    1.093969] pci 0000:00:1c.2:   bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
[    1.094021] pci 0000:07:00.0: [11ab:6121] type 0 class 0x000101
[    1.094036] pci 0000:07:00.0: reg 10: [io  0xcc00-0xcc07]
[    1.094047] pci 0000:07:00.0: reg 14: [io  0xc880-0xc883]
[    1.094057] pci 0000:07:00.0: reg 18: [io  0xc800-0xc807]
[    1.094069] pci 0000:07:00.0: reg 1c: [io  0xc480-0xc483]
[    1.094079] pci 0000:07:00.0: reg 20: [io  0xc400-0xc40f]
[    1.094090] pci 0000:07:00.0: reg 24: [mem 0xfbbffc00-0xfbbfffff]
[    1.094152] pci 0000:07:00.0: supports D1
[    1.094154] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[    1.094158] pci 0000:07:00.0: PME# disabled
[    1.094174] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.094181] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[    1.094184] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    1.094187] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    1.094241] pci 0000:06:00.0: [11ab:6440] type 0 class 0x000104
[    1.094275] pci 0000:06:00.0: reg 18: [io  0xbc00-0xbc7f]
[    1.094300] pci 0000:06:00.0: reg 20: [mem 0xfbaff000-0xfbafffff 64bit]
[    1.094311] pci 0000:06:00.0: reg 30: [mem 0xfba80000-0xfbabffff pref]
[    1.094361] pci 0000:06:00.0: supports D1
[    1.094362] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    1.094366] pci 0000:06:00.0: PME# disabled
[    1.094382] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.094389] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    1.094392] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    1.094395] pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
[    1.094430] pci 0000:0b:04.0: [11c1:5811] type 0 class 0x000c00
[    1.094445] pci 0000:0b:04.0: reg 10: [mem 0xfbeff000-0xfbefffff]
[    1.094512] pci 0000:0b:04.0: supports D1 D2
[    1.094513] pci 0000:0b:04.0: PME# supported from D0 D1 D2 D3hot
[    1.094516] pci 0000:0b:04.0: PME# disabled
[    1.094552] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[    1.094556] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    1.094561] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.094563] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.094565] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.094566] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    1.094568] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    1.094569] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    1.094602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.094766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.094818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    1.094837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    1.094855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    1.094874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    1.094893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    1.094912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[    1.094932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1.PXHA._PRT]
[    1.094967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[    1.094986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[    1.095006]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.095008]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.095009] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.103788] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    1.103820] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    1.103848] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    1.103878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    1.103908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    1.103938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    1.103968] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    1.103998] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[    1.104086] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.104089] vgaarb: loaded
[    1.104090] vgaarb: bridge control possible 0000:04:00.0
[    1.104157] i2c-core: driver [aat2870] using legacy suspend method
[    1.104158] i2c-core: driver [aat2870] using legacy resume method
[    1.104204] SCSI subsystem initialized
[    1.104244] libata version 3.00 loaded.
[    1.104276] usbcore: registered new interface driver usbfs
[    1.104283] usbcore: registered new interface driver hub
[    1.104297] usbcore: registered new device driver usb
[    1.104356] PCI: Using ACPI for IRQ routing
[    1.109822] PCI: Discovered peer bus ff
[    1.109846] pci 0000:ff:00.0: [8086:2c41] type 0 class 0x000600
[    1.109861] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600
[    1.109878] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600
[    1.109892] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600
[    1.109906] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600
[    1.109920] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600
[    1.109933] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600
[    1.109951] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600
[    1.109964] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600
[    1.109977] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600
[    1.109992] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600
[    1.110006] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600
[    1.110019] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600
[    1.110032] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600
[    1.110045] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600
[    1.110061] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600
[    1.110075] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600
[    1.110088] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600
[    1.110102] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600
[    1.110417] PCI: pci_cache_line_size set to 64 bytes
[    1.110530] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    1.110532] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
[    1.110601] NetLabel: Initializing
[    1.110602] NetLabel:  domain hash size = 128
[    1.110603] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.110610] NetLabel:  unlabeled traffic allowed by default
[    1.110643] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    1.110647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.110650] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.130047] Switching to clocksource hpet
[    1.134648] AppArmor: AppArmor Filesystem Enabled
[    1.134667] pnp: PnP ACPI init
[    1.134680] ACPI: bus type pnp registered
[    1.134764] pnp 00:00: [bus 00-ff]
[    1.134766] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.134767] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.134769] pnp 00:00: [io  0x0d00-0xffff window]
[    1.134770] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.134772] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    1.134773] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    1.134774] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    1.134822] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.134829] pnp 00:01: [mem 0xfbf00000-0xfbffffff]
[    1.134831] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    1.134832] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    1.134835] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    1.134836] pnp 00:01: [mem 0xfec8a000-0xfec8afff]
[    1.134837] pnp 00:01: [mem 0xfed10000-0xfed10fff]
[    1.134887] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[    1.134889] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    1.134891] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    1.134893] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    1.134895] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[    1.134896] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[    1.134899] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.134927] pnp 00:02: [dma 4]
[    1.134929] pnp 00:02: [io  0x0000-0x000f]
[    1.134930] pnp 00:02: [io  0x0081-0x0083]
[    1.134931] pnp 00:02: [io  0x0087]
[    1.134932] pnp 00:02: [io  0x0089-0x008b]
[    1.134933] pnp 00:02: [io  0x008f]
[    1.134934] pnp 00:02: [io  0x00c0-0x00df]
[    1.134953] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.134960] pnp 00:03: [io  0x0070-0x0071]
[    1.134968] pnp 00:03: [irq 8]
[    1.134987] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.134992] pnp 00:04: [io  0x0061]
[    1.135009] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.135014] pnp 00:05: [io  0x00f0-0x00ff]
[    1.135018] pnp 00:05: [irq 13]
[    1.135037] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.135081] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    1.135083] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    1.135084] pnp 00:06: [io  0x0290-0x029f]
[    1.135125] system 00:06: [io  0x0290-0x029f] has been reserved
[    1.135127] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.135217] pnp 00:07: [io  0x0010-0x001f]
[    1.135218] pnp 00:07: [io  0x0022-0x003f]
[    1.135219] pnp 00:07: [io  0x0044-0x004d]
[    1.135220] pnp 00:07: [io  0x0050-0x005f]
[    1.135222] pnp 00:07: [io  0x0062-0x0063]
[    1.135223] pnp 00:07: [io  0x0065-0x006f]
[    1.135224] pnp 00:07: [io  0x0072-0x007f]
[    1.135225] pnp 00:07: [io  0x0080]
[    1.135226] pnp 00:07: [io  0x0084-0x0086]
[    1.135227] pnp 00:07: [io  0x0088]
[    1.135228] pnp 00:07: [io  0x008c-0x008e]
[    1.135230] pnp 00:07: [io  0x0090-0x009f]
[    1.135231] pnp 00:07: [io  0x00a2-0x00bf]
[    1.135232] pnp 00:07: [io  0x00e0-0x00ef]
[    1.135233] pnp 00:07: [io  0x04d0-0x04d1]
[    1.135234] pnp 00:07: [io  0x0800-0x087f]
[    1.135235] pnp 00:07: [io  0x0400-0x03ff disabled]
[    1.135237] pnp 00:07: [io  0x0500-0x057f]
[    1.135238] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    1.135239] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[    1.135240] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[    1.135299] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    1.135301] system 00:07: [io  0x0800-0x087f] has been reserved
[    1.135303] system 00:07: [io  0x0500-0x057f] has been reserved
[    1.135305] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.135307] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.135309] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[    1.135311] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.135355] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    1.135377] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.135407] pnp 00:09: [mem 0xffa00000-0xffbfffff]
[    1.135408] pnp 00:09: [mem 0xffe00000-0xffffffff]
[    1.135431] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[    1.135457] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
[    1.135496] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[    1.135498] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.135548] pnp 00:0b: [io  0x0060]
[    1.135550] pnp 00:0b: [io  0x0064]
[    1.135551] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    1.135552] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    1.135595] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.135596] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.135599] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.135648] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    1.135689] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    1.135691] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.135797] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    1.135798] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    1.135799] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    1.135801] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[    1.135802] pnp 00:0d: [mem 0xfed90000-0xffffffff]
[    1.135852] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.135854] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    1.135855] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.135857] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[    1.135859] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[    1.135861] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.135945] pnp: PnP ACPI: found 14 devices
[    1.135946] ACPI: ACPI bus type pnp unregistered
[    1.141956] PCI: max bus depth: 2 pci_try_num: 3
[    1.142026] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.142028] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    1.142030] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
[    1.142032] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    1.142034] pci 0000:01:00.0: PCI bridge to [bus 03-03]
[    1.142047] pci 0000:01:00.1: PCI bridge to [bus 02-02]
[    1.142055] pci 0000:01:00.1:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.142062] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    1.142065] pci 0000:00:01.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    1.142068] pci 0000:00:01.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.142072] pci 0000:00:03.0: PCI bridge to [bus 04-04]
[    1.142074] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    1.142077] pci 0000:00:03.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    1.142080] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.142084] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    1.142091] pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
[    1.142093] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    1.142097] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc07fffff]
[    1.142100] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    1.142105] pci 0000:00:1c.1: PCI bridge to [bus 09-09]
[    1.142107] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.142111] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    1.142114] pci 0000:00:1c.1:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
[    1.142118] pci 0000:00:1c.2: PCI bridge to [bus 08-08]
[    1.142120] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    1.142131] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    1.142134] pci 0000:00:1c.2:   bridge window [mem 0xfad00000-0xfadfffff 64bit pref]
[    1.142139] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[    1.142141] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    1.142145] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    1.142148] pci 0000:00:1c.3:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    1.142152] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    1.142154] pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
[    1.142158] pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
[    1.142161] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.142166] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[    1.142169] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    1.142181] pci 0000:00:01.0: setting latency timer to 64
[    1.142189] pci 0000:01:00.0: setting latency timer to 64
[    1.142203] pci 0000:01:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[    1.142207] pci 0000:01:00.1: setting latency timer to 64
[    1.142212] pci 0000:00:03.0: setting latency timer to 64
[    1.142217] pci 0000:00:07.0: setting latency timer to 64
[    1.142222] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    1.142227] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.142230] pci 0000:00:1c.0: setting latency timer to 64
[    1.142238] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.142241] pci 0000:00:1c.1: setting latency timer to 64
[    1.142249] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.142252] pci 0000:00:1c.2: setting latency timer to 64
[    1.142261] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.142264] pci 0000:00:1c.3: setting latency timer to 64
[    1.142269] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.142272] pci 0000:00:1c.4: setting latency timer to 64
[    1.142277] pci 0000:00:1e.0: setting latency timer to 64
[    1.142280] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.142282] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.142283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.142285] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    1.142286] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    1.142288] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    1.142289] pci_bus 0000:01: resource 1 [mem 0xfb800000-0xfb8fffff]
[    1.142291] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.142293] pci_bus 0000:02: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[    1.142295] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    1.142296] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
[    1.142298] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.142300] pci_bus 0000:0a: resource 0 [io  0x1000-0x1fff]
[    1.142302] pci_bus 0000:0a: resource 1 [mem 0xc0400000-0xc07fffff]
[    1.142304] pci_bus 0000:0a: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    1.142305] pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
[    1.142307] pci_bus 0000:09: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    1.142309] pci_bus 0000:09: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
[    1.142311] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    1.142312] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    1.142314] pci_bus 0000:08: resource 2 [mem 0xfad00000-0xfadfffff 64bit pref]
[    1.142316] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
[    1.142318] pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    1.142320] pci_bus 0000:07: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    1.142321] pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
[    1.142323] pci_bus 0000:06: resource 1 [mem 0xfba00000-0xfbafffff]
[    1.142325] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.142327] pci_bus 0000:0b: resource 1 [mem 0xfbe00000-0xfbefffff]
[    1.142329] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
[    1.142330] pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff]
[    1.142332] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
[    1.142334] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000dffff]
[    1.142335] pci_bus 0000:0b: resource 8 [mem 0xc0000000-0xdfffffff]
[    1.142337] pci_bus 0000:0b: resource 9 [mem 0xf0000000-0xfed8ffff]
[    1.142339] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    1.142340] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    1.142368] NET: Registered protocol family 2
[    1.142597] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    1.143456] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.144595] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.144731] TCP: Hash tables configured (established 524288 bind 65536)
[    1.144733] TCP reno registered
[    1.144748] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.144799] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.144910] NET: Registered protocol family 1
[    1.144938] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.144953] pci 0000:00:1a.0: PCI INT A disabled
[    1.144965] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.144980] pci 0000:00:1a.1: PCI INT B disabled
[    1.144985] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.144999] pci 0000:00:1a.2: PCI INT D disabled
[    1.145005] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.145030] pci 0000:00:1a.7: PCI INT C disabled
[    1.145047] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.145062] pci 0000:00:1d.0: PCI INT A disabled
[    1.145067] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.145081] pci 0000:00:1d.1: PCI INT B disabled
[    1.145086] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.145100] pci 0000:00:1d.2: PCI INT C disabled
[    1.145106] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.145132] pci 0000:00:1d.7: PCI INT A disabled
[    1.145149] pci 0000:04:00.0: Boot video device
[    1.145180] PCI: CLS 256 bytes, default 64
[    1.145182] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.145183] Placing 64MB software IO TLB between ffff8800bb772000 - ffff8800bf772000
[    1.145185] software IO TLB at phys 0xbb772000 - 0xbf772000
[    1.145669] audit: initializing netlink socket (disabled)
[    1.145675] type=2000 audit(1349264879.876:1): initialized
[    1.163708] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.165504] VFS: Disk quotas dquot_6.5.2
[    1.165544] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.165901] fuse init (API version 7.17)
[    1.165962] msgmni has been set to 23969
[    1.166204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.166222] io scheduler noop registered
[    1.166223] io scheduler deadline registered
[    1.166246] io scheduler cfq registered (default)
[    1.166435] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.166472] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[    1.166518] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.166551] pcieport 0000:00:1c.1: irq 65 for MSI/MSI-X
[    1.166597] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.166628] pcieport 0000:00:1c.2: irq 66 for MSI/MSI-X
[    1.166674] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.166705] pcieport 0000:00:1c.3: irq 67 for MSI/MSI-X
[    1.166749] pcieport 0000:00:1c.4: setting latency timer to 64
[    1.166782] pcieport 0000:00:1c.4: irq 68 for MSI/MSI-X
[    1.166849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.166864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.166905] intel_idle: MWAIT substates: 0x1120
[    1.166914] intel_idle: v0.4 model 0x1A
[    1.166915] intel_idle: lapic_timer_reliable_states 0x2
[    1.167002] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.167006] ACPI: Power Button [PWRB]
[    1.167033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.167036] ACPI: Power Button [PWRF]
[    1.167986] ERST: Table is not found!
[    1.167988] GHES: HEST is not enabled!
[    1.168034] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.188379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.274909] Freeing initrd memory: 20980k freed
[    1.386420] Linux agpgart interface v0.103
[    1.387548] brd: module loaded
[    1.388116] loop: module loaded
[    1.388209] ahci 0000:07:00.0: version 3.0
[    1.388246] ata_piix 0000:00:1f.2: version 2.13
[    1.388257] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.388260] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.388289] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.388485] scsi0 : ata_piix
[    1.388534] scsi1 : ata_piix
[    1.389139] ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
[    1.389143] ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
[    1.389156] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.389159] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.389184] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.389312] scsi2 : ata_piix
[    1.389356] scsi3 : ata_piix
[    1.389883] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[    1.389886] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[    1.389925] pata_acpi 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.389942] pata_acpi 0000:07:00.0: setting latency timer to 64
[    1.389952] pata_acpi 0000:07:00.0: PCI INT A disabled
[    1.390150] Fixed MDIO Bus: probed
[    1.390163] tun: Universal TUN/TAP device driver, 1.6
[    1.390165] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.390203] PPP generic driver version 2.4.2
[    1.390273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.390284] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.390306] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.390309] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.390343] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.390363] ehci_hcd 0000:00:1a.7: debug port 1
[    1.394240] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[    1.394250] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb7ff000
[    1.410012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.410133] hub 1-0:1.0: USB hub found
[    1.410136] hub 1-0:1.0: 6 ports detected
[    1.410199] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.410209] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.410212] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.410243] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.410261] ehci_hcd 0000:00:1d.7: debug port 1
[    1.414158] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[    1.414169] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb7fe000
[    1.430002] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.430117] hub 2-0:1.0: USB hub found
[    1.430120] hub 2-0:1.0: 6 ports detected
[    1.430177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.430187] uhci_hcd: USB Universal Host Controller Interface driver
[    1.430200] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.430205] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.430207] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.430242] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.430270] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[    1.430356] hub 3-0:1.0: USB hub found
[    1.430359] hub 3-0:1.0: 2 ports detected
[    1.430408] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.430413] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.430415] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.430447] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.430474] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[    1.430563] hub 4-0:1.0: USB hub found
[    1.430565] hub 4-0:1.0: 2 ports detected
[    1.430615] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.430620] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.430622] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.430652] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.430673] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[    1.430756] hub 5-0:1.0: USB hub found
[    1.430759] hub 5-0:1.0: 2 ports detected
[    1.430808] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.430813] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.430816] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.430846] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.430867] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[    1.430951] hub 6-0:1.0: USB hub found
[    1.430954] hub 6-0:1.0: 2 ports detected
[    1.431004] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.431009] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.431012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.431043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.431063] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[    1.431148] hub 7-0:1.0: USB hub found
[    1.431150] hub 7-0:1.0: 2 ports detected
[    1.431200] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.431206] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.431208] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.431237] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.431258] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[    1.431344] hub 8-0:1.0: USB hub found
[    1.431347] hub 8-0:1.0: 2 ports detected
[    1.431435] usbcore: registered new interface driver libusual
[    1.431460] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.434131] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.434135] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.434220] mousedev: PS/2 mouse device common for all mice
[    1.434312] rtc_cmos 00:03: RTC can wake from S4
[    1.434393] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.434417] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.434469] device-mapper: uevent: version 1.0.3
[    1.434513] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.434641] cpuidle: using governor ladder
[    1.434834] cpuidle: using governor menu
[    1.434835] EFI Variables Facility v0.08 2004-May-17
[    1.434994] TCP cubic registered
[    1.435062] NET: Registered protocol family 10
[    1.435400] NET: Registered protocol family 17
[    1.435403] Registering the dns_resolver key type
[    1.435512] PM: Hibernation image not present or could not be loaded.
[    1.435520] registered taskstats version 1
[    1.441760]   Magic number: 0:203:832
[    1.442054] rtc_cmos 00:03: setting system clock to 2012-10-03 11:48:00 UTC (1349264880)
[    1.443740] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.443741] EDD information not available.
[    1.716784] ata4: SATA link down (SStatus 0 SControl 300)
[    1.721941] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.727559] ata3: SATA link down (SStatus 0 SControl 300)
[    1.857967] Initializing USB Mass Storage driver...
[    1.858396] scsi4 : usb-storage 1-1:1.0
[    1.858476] usbcore: registered new interface driver usb-storage
[    1.858479] USB Mass Storage support registered.
[    2.036521] ata1.00: SATA link down (SStatus 0 SControl 300)
[    2.036533] ata1.01: SATA link down (SStatus 0 SControl 300)
[    2.141731] Refined TSC clocksource calibration: 3073.636 MHz.
[    2.141737] Switching to clocksource tsc
[    2.189822] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.189835] ata2.01: SATA link down (SStatus 0 SControl 300)
[    2.198853] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    2.198858] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.214836] ata2.00: configured for UDMA/133
[    2.215148] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[    2.215345] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.215363] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.215454] sd 1:0:0:0: [sda] Write Protect is off
[    2.215456] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.215469] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.255211]  sda: sda1 sda2 < sda5 >
[    2.256214] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.257535] Freeing unused kernel memory: 920k freed
[    2.257659] Write protecting the kernel read-only data: 12288k
[    2.261662] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    2.262367] Freeing unused kernel memory: 1616k freed
[    2.265699] Freeing unused kernel memory: 1200k freed
[    2.283000] udevd[129]: starting version 175
[    2.294804] wmi: Mapper loaded
[    2.301199] pata_marvell 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.301228] pata_marvell 0000:07:00.0: setting latency timer to 64
[    2.301280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.301296] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.301324] r8169 0000:09:00.0: setting latency timer to 64
[    2.301379] r8169 0000:09:00.0: irq 69 for MSI/MSI-X
[    2.301551] scsi5 : pata_marvell
[    2.301817] scsi6 : pata_marvell
[    2.301863] ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[    2.301865] ata6: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[    2.301914] r8169 0000:09:00.0: eth0: RTL8168c/8111c at 0xffffc9000187a000, 20:cf:30:f1:a3:f7, XID 1c4000c0 IRQ 69
[    2.301918] r8169 0000:09:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.302389] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.302404] r8169 0000:08:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.302429] r8169 0000:08:00.0: setting latency timer to 64
[    2.302481] r8169 0000:08:00.0: irq 70 for MSI/MSI-X
[    2.302886] r8169 0000:08:00.0: eth1: RTL8168c/8111c at 0xffffc9000187c000, 20:cf:30:f1:a2:56, XID 1c4000c0 IRQ 70
[    2.302890] r8169 0000:08:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.469548] input: Chicony Eclipse Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2
[    2.469618] generic-usb 0003:06A3:8018.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Eclipse Multimedia Keyboard] on usb-0000:00:1d.0-1/input0
[    2.499471] input: Chicony Eclipse Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input3
[    2.499675] generic-usb 0003:06A3:8018.0002: input,hidraw1: USB HID v1.11 Device [Chicony Eclipse Multimedia Keyboard] on usb-0000:00:1d.0-1/input1
[    2.499686] usbcore: registered new interface driver usbhid
[    2.499687] usbhid: USB HID core driver
[    2.638368] mvsas 0000:06:00.0: mvsas: driver version 0.8.16
[    2.638381] mvsas 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.638385] firewire_ohci 0000:0b:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.638394] mvsas 0000:06:00.0: setting latency timer to 64
[    2.638568] mvsas 0000:06:00.0: mvsas: PCI-E x1, Bandwidth Usage: 2.5 Gbps
[    2.640286] [drm] Initialized drm 1.1.0 20060810
[    2.645124] [drm] radeon defaulting to kernel modesetting.
[    2.645126] [drm] radeon kernel modesetting enabled.
[    2.645190] radeon 0000:04:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[    2.645194] radeon 0000:04:00.0: setting latency timer to 64
[    2.645307] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x174B:0xE131).
[    2.645323] [drm] register mmio base: 0xFB9E0000
[    2.645324] [drm] register mmio size: 65536
[    2.645393] ATOM BIOS: Wekiva
[    2.645407] radeon 0000:04:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.645409] radeon 0000:04:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.649730] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.649733] [drm] RAM width 256bits DDR
[    2.649894] [TTM] Zone  kernel: Available graphics memory: 6148584 kiB.
[    2.649897] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[    2.649900] [TTM] Initializing pool allocator.
[    2.649928] [drm] radeon: 1024M of VRAM memory ready
[    2.649931] [drm] radeon: 512M of GTT memory ready.
[    2.649947] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.649949] [drm] Driver supports precise vblank timestamp query.
[    2.649998] radeon 0000:04:00.0: irq 71 for MSI/MSI-X
[    2.650004] radeon 0000:04:00.0: radeon: using MSI.
[    2.650041] [drm] radeon: irq initialized.
[    2.650044] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.650438] [drm] Loading RV770 Microcode
[    2.655245] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    2.655314] radeon 0000:04:00.0: WB enabled
[    2.693526] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    2.693568] firewire_ohci: Added fw-ohci device 0000:0b:04.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    2.701678] [drm] ring test succeeded in 1 usecs
[    2.701742] [drm] radeon: ib pool ready.
[    2.701834] [drm] ib test succeeded in 0 usecs
[    2.701971] [drm] Radeon Display Connectors
[    2.701972] [drm] Connector 0:
[    2.701973] [drm]   DVI-I
[    2.701974] [drm]   HPD2
[    2.701975] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    2.701976] [drm]   Encoders:
[    2.701977] [drm]     DFP1: INTERNAL_UNIPHY
[    2.701978] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.701979] [drm] Connector 1:
[    2.701980] [drm]   DIN
[    2.701980] [drm]   Encoders:
[    2.701981] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.701982] [drm] Connector 2:
[    2.701983] [drm]   DVI-I
[    2.701983] [drm]   HPD1
[    2.701985] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    2.701986] [drm]   Encoders:
[    2.701986] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.701987] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    2.702012] [drm] Internal thermal controller with fan control
[    2.702037] [drm] radeon: power management initialized
[    2.786146] [drm] fb mappable at 0xD0142000
[    2.786147] [drm] vram apper at 0xD0000000
[    2.786148] [drm] size 8294400
[    2.786149] [drm] fb depth is 24
[    2.786150] [drm]    pitch is 7680
[    2.786215] fbcon: radeondrmfb (fb0) is primary device
[    2.786276] Console: switching to colour frame buffer device 240x67
[    2.786302] fb0: radeondrmfb frame buffer device
[    2.786303] drm: registered panic notifier
[    2.786307] [drm] Initialized radeon 2.12.0 20080528 for 0000:04:00.0 on minor 0
[    2.858506] scsi 4:0:0:0: Direct-Access     Seagate  Desktop          0130 PQ: 0 ANSI: 4
[    2.859626] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.860413] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.861061] sd 4:0:0:0: [sdb] Write Protect is off
[    2.861064] sd 4:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[    2.861842] sd 4:0:0:0: [sdb] No Caching mode page present
[    2.861846] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.864027] sd 4:0:0:0: [sdb] No Caching mode page present
[    2.864031] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.864563]  sdb: sdb1
[    2.869458] sd 4:0:0:0: [sdb] No Caching mode page present
[    2.869460] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.869461] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.903596] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
[    2.903882] generic-usb 0003:12CF:0155.0003: input,hidraw2: USB HID v1.11 Mouse [DEXIN Corporation CM STORM SENTINEL GAMING MOUSE] on usb-0000:00:1d.1-2/input0
[    2.907583] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input5
[    2.907784] generic-usb 0003:12CF:0155.0004: input,hidraw3: USB HID v1.11 Keyboard [DEXIN Corporation CM STORM SENTINEL GAMING MOUSE] on usb-0000:00:1d.1-2/input1
[    3.193450] firewire_core: created device fw0: GUID 001e8c000036093b, S400
[    4.880504] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 0 attach dev info is 0
[    4.880508] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 0 attach sas addr is 0
[    5.084402] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 1 attach dev info is 0
[    5.084406] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 1 attach sas addr is 1
[    5.188362] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 2 attach dev info is 0
[    5.188366] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 2 attach sas addr is 0
[    5.292308] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1181:phy 3 attach dev info is 0
[    5.292313] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1183:phy 3 attach sas addr is 0
[    5.292321] scsi7 : mvsas
[    5.293236] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
[    5.293497] sas: phy-7:1 added to port-7:0, phy_mask:0x2 ( 100000000000000)
[    5.293511] sas: DOING DISCOVERY on port 0, pid:77
[    5.301623] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1353:found dev[0:5] is gone.
[    5.301896] sas: Enter sas_scsi_recover_host
[    5.301900] ata7: sas eh calling libata port error handler
[    5.301908] sas: sas_ata_hard_reset: Found ATAPI device.
[    5.304982] ata7.00: ATAPI: HL-DT-ST BD-RE  BH10LS30, 1.00, max UDMA/133
[    5.308911] ata7.00: configured for UDMA/133
[    5.314616] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.314642] sas: --- Exit sas_scsi_recover_host
[    5.323787] scsi 7:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10LS30  1.00 PQ: 0 ANSI: 5
[    5.334728] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.334749] sas: Enter sas_scsi_recover_host
[    5.334752] ata7: sas eh calling libata cmd error handler
[    5.334757] ata7: sas eh calling libata port error handler
[    5.336370] sas: --- Exit sas_scsi_recover_host
[    5.344455] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.344462] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.344724] sr 7:0:0:0: Attached scsi CD-ROM sr0
[    5.344910] sr 7:0:0:0: Attached scsi generic sg2 type 5
[    5.344989] sas: DONE DISCOVERY on port 0, pid:77, result:0
[    5.371650] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.371672] sas: Enter sas_scsi_recover_host
[    5.371675] ata7: sas eh calling libata cmd error handler
[    5.371680] ata7: sas eh calling libata port error handler
[    5.373113] sas: --- Exit sas_scsi_recover_host
[    5.384058] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.384080] sas: Enter sas_scsi_recover_host
[    5.384083] ata7: sas eh calling libata cmd error handler
[    5.384088] ata7: sas eh calling libata port error handler
[    5.385519] sas: --- Exit sas_scsi_recover_host
[    5.398023] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.398045] sas: Enter sas_scsi_recover_host
[    5.398048] ata7: sas eh calling libata cmd error handler
[    5.398053] ata7: sas eh calling libata port error handler
[    5.399484] sas: --- Exit sas_scsi_recover_host
[    5.412004] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.412026] sas: Enter sas_scsi_recover_host
[    5.412029] ata7: sas eh calling libata cmd error handler
[    5.412035] ata7: sas eh calling libata port error handler
[    5.413465] sas: --- Exit sas_scsi_recover_host
[    5.431767] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[    5.431789] sas: Enter sas_scsi_recover_host
[    5.431792] ata7: sas eh calling libata cmd error handler
[    5.431797] ata7: sas eh calling libata port error handler
[    5.433227] sas: --- Exit sas_scsi_recover_host
[   11.353886] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.602300] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.602304] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.623028] udevd[428]: starting version 175
[   16.661511] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.662212] lp: driver loaded but no devices found
[   16.664111] EDAC MC: Ver: 2.1.0
[   16.665204] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
[   16.665223] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[   16.665232] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   16.671111] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   16.671134] sas: Enter sas_scsi_recover_host
[   16.671137] ata7: sas eh calling libata cmd error handler
[   16.671144] ata7: sas eh calling libata port error handler
[   16.672557] sas: --- Exit sas_scsi_recover_host
[   16.683505] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   16.683600] sas: Enter sas_scsi_recover_host
[   16.683604] ata7: sas eh calling libata cmd error handler
[   16.683610] ata7: sas eh calling libata port error handler
[   16.684975] sas: --- Exit sas_scsi_recover_host
[   16.685040] type=1400 audit(1349264895.746:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=490 comm="apparmor_parser"
[   16.685390] type=1400 audit(1349264895.746:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=490 comm="apparmor_parser"
[   16.685580] type=1400 audit(1349264895.746:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=490 comm="apparmor_parser"
[   16.686301] type=1400 audit(1349264895.746:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=486 comm="apparmor_parser"
[   16.686568] type=1400 audit(1349264895.746:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
[   16.686721] type=1400 audit(1349264895.746:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
[   16.699052] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.699095] snd_hda_intel 0000:00:1b.0: irq 72 for MSI/MSI-X
[   16.699114] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   16.714178] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   16.714200] sas: Enter sas_scsi_recover_host
[   16.714203] ata7: sas eh calling libata cmd error handler
[   16.714208] ata7: sas eh calling libata port error handler
[   16.715633] sas: --- Exit sas_scsi_recover_host
[   16.736107] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   16.736129] sas: Enter sas_scsi_recover_host
[   16.736132] ata7: sas eh calling libata cmd error handler
[   16.736137] ata7: sas eh calling libata port error handler
[   16.737551] sas: --- Exit sas_scsi_recover_host
[   16.750059] /build/buildd/linux-3.2.0/drivers/scsi/mvsas/mv_sas.c 1863:port 1 slot 0 rx_desc 20000 has error info0000000001000000.
[   16.750104] sas: Enter sas_scsi_recover_host
[   16.750108] ata7: sas eh calling libata cmd error handler
[   16.750114] ata7: sas eh calling libata port error handler
[   16.751499] sas: --- Exit sas_scsi_recover_host
[   16.893126] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.071130] init: failsafe main process (891) killed by TERM signal
[   17.087662] Bluetooth: Core ver 2.16
[   17.087677] NET: Registered protocol family 31
[   17.087679] Bluetooth: HCI device and connection manager initialized
[   17.087680] Bluetooth: HCI socket layer initialized
[   17.087681] Bluetooth: L2CAP socket layer initialized
[   17.087684] Bluetooth: SCO socket layer initialized
[   17.088855] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.088857] Bluetooth: BNEP filters: protocol multicast
[   17.096166] hda_codec: AD1989B: BIOS auto-probing.
[   17.098800] snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
[   17.098908] snd_hda_intel 0000:04:00.1: irq 73 for MSI/MSI-X
[   17.098929] snd_hda_intel 0000:04:00.1: setting latency timer to 64
[   17.108676] Bluetooth: RFCOMM TTY layer initialized
[   17.108682] Bluetooth: RFCOMM socket layer initialized
[   17.108685] Bluetooth: RFCOMM ver 1.11
[   17.116511] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   17.116605] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input6
[   17.180236] ppdev: user-space parallel port driver
[   17.181914] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[   17.182500] parport0: irq 7 detected
[   17.213139] r8169 0000:09:00.0: eth0: link down
[   17.213144] r8169 0000:09:00.0: eth0: link down
[   17.214426] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.214670] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.219771] r8169 0000:08:00.0: eth1: link down
[   17.220748] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.220951] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.224818] type=1400 audit(1349264896.286:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1000 comm="apparmor_parser"
[   17.224850] type=1400 audit(1349264896.286:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=994 comm="apparmor_parser"
[   17.225257] type=1400 audit(1349264896.286:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=995 comm="apparmor_parser"
[   17.225413] type=1400 audit(1349264896.286:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=998 comm="apparmor_parser"
[   17.279081] lp0: using parport0 (polling).
[   18.878697] r8169 0000:09:00.0: eth0: link up
[   18.879621] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.226578] Adding 12571644k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:12571644k 
[   29.616853] eth0: no IPv6 routers present
[   74.232949] do_general_protection: 39 callbacks suppressed
[   74.232952] accounts-daemon[1339] general protection ip:7f2512d07c06 sp:7fff4a19a380 error:0 in libdbus-1.so.3.5.8[7f2512cfb000+42000]
th3b4dg3r@th3b4dg3r:~$

Le rapport ne commence pas par la meme chose que la derniere fois ce n'est pas de bonne augure pour moi ca!

Dernière modification par Ironwind25 (Le 03/10/2012, à 14:12)

Ironwind25 · Le 05/10/2012, à 02:48

S.v.p Quelqu'un merci!

david96 · Le 05/10/2012, à 02:57

Dans Gestionnaire de paramètres > Session et démarrage.
Si tu ne te sers pas des touches du clavier pour contrôler le son décoche le Démon lié à ce dernier.

Ironwind25 · Le 05/10/2012, à 04:36

SAlut,

Merci beaucoup de ta réponse!Cest fait j ai decocher le demon je vais voir le resultat au prochain démarrage!
Je te tiens au courant!

Merci de ton temps!

Dernière modification par Ironwind25 (Le 05/10/2012, à 04:37)

Ironwind25 · Le 06/10/2012, à 01:38

Salut david96,

Pour l'instant tout est OK!Je passe cela en résolu pour le moment !

Merci de ton aide en passant!

david96 · Le 06/10/2012, à 02:16

Cool.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 14/08/2012, à 02:05

Demon de volume xfce!(RESOLU)

#2 Le 14/08/2012, à 09:02

Re : Demon de volume xfce!(RESOLU)

#3 Le 14/08/2012, à 20:08

Re : Demon de volume xfce!(RESOLU)

#4 Le 14/08/2012, à 22:05

Re : Demon de volume xfce!(RESOLU)

#5 Le 03/10/2012, à 14:05

Re : Demon de volume xfce!(RESOLU)

#6 Le 05/10/2012, à 02:48

Re : Demon de volume xfce!(RESOLU)

#7 Le 05/10/2012, à 02:57

Re : Demon de volume xfce!(RESOLU)

#8 Le 05/10/2012, à 04:36

Re : Demon de volume xfce!(RESOLU)

#9 Le 06/10/2012, à 01:38

Re : Demon de volume xfce!(RESOLU)

#10 Le 06/10/2012, à 02:16

Re : Demon de volume xfce!(RESOLU)

Pied de page des forums