Ubuntu-fr

joffrey

controle de la vitesse d'un ventilateur fan1

Bonjour,

Je viens d'installer kubuntu, mon fan1 tourne a 6500 en moyenne j'ai essayer pas mal de chose,avec fancontrol,pwconfig et je control avec xsensor.

avec pwconfig, il teste les différentes vitesse jusqu’à 0 RPM  mais impossible de stabilisé a une vitesse moyenne!

ensuite j'ai lancé fancontrol et j'obtiens :

regis@regis-bureau:/usr/bin$ fancontrol start
Loading configuration from /etc/fancontrol ...

Common settings:
  INTERVAL=10

Settings for hwmon0/device/pwm1:
  Depends on hwmon0/device/temp3_input
  Controls hwmon0/device/fan1_input
  MINTEMP=10
  MAXTEMP=50
  MINSTART=150
  MINSTOP=120
  MINPWM=120
  MAXPWM=255

Error: file hwmon0/device/pwm1 doesn't exist

At least one referenced file is missing. Either some required kernel
modules haven't been loaded, or your configuration file is outdated.
In the latter case, you should run pwmconfig again.
regis@regis-bureau:/usr/bin$

"pour info "

egis@regis-bureau:/usr/bin$ sensors
asb100-i2c-4-2d
Adapter: SMBus nForce2 adapter at 5500
in0:          +1.70 V  (min =  +1.31 V, max =  +1.97 V)
in1:          +1.68 V  (min =  +1.31 V, max =  +1.97 V)
in2:          +3.33 V  (min =  +2.96 V, max =  +3.63 V)
in3:          +3.01 V  (min =  +2.67 V, max =  +3.28 V)
in4:          +3.10 V  (min =  +2.51 V, max =  +3.79 V)
in5:          +3.09 V  (min =  +0.00 V, max =  +0.00 V)
in6:          +3.10 V  (min =  +0.00 V, max =  +0.00 V)
fan1:        6490 RPM  (min =   -1 RPM, div = 2)
fan2:           0 RPM  (min =   -1 RPM, div = 2)
fan3:           0 RPM  (min = 5273 RPM, div = 2)
temp1:        +38.0°C  (high = +80.0°C, hyst = +75.0°C)
temp2:        +28.0°C  (high = +80.0°C, hyst = +75.0°C)
temp3:         -0.5°C  (high = +80.0°C, hyst = +75.0°C)
temp4:        +25.0°C  (high = +80.0°C, hyst = +75.0°C)
cpu0_vid:    +1.650 V

w83l785ts-i2c-4-2e
Adapter: SMBus nForce2 adapter at 5500
temp1:        +32.0°C  (high = +110.0°C)

regis@regis-bureau:/usr/bin$

après un redémarrage :

regis@regis-bureau:/usr/bin$ sensors
asb100-i2c-4-2d
Adapter: SMBus nForce2 adapter at 5500
in0:          +1.70 V  (min =  +1.31 V, max =  +1.97 V)
in1:          +1.68 V  (min =  +1.31 V, max =  +1.97 V)
in2:          +3.33 V  (min =  +2.96 V, max =  +3.63 V)
in3:          +2.98 V  (min =  +2.67 V, max =  +3.28 V)
in4:          +3.12 V  (min =  +2.51 V, max =  +3.79 V)
in5:          +3.12 V  (min =  +0.00 V, max =  +0.00 V)
in6:          +3.09 V  (min =  +0.00 V, max =  +0.00 V)
fan1:        4720 RPM  (min =   -1 RPM, div = 2)
fan2:           0 RPM  (min =   -1 RPM, div = 2)
fan3:           0 RPM  (min = 5273 RPM, div = 2)
temp1:        +45.0°C  (high = +80.0°C, hyst = +75.0°C)
temp2:        +28.0°C  (high = +80.0°C, hyst = +75.0°C)
temp3:         -0.5°C  (high = +80.0°C, hyst = +75.0°C)
temp4:        +25.0°C  (high = +80.0°C, hyst = +75.0°C)
cpu0_vid:    +1.650 V

w83l785ts-i2c-4-2e
Adapter: SMBus nForce2 adapter at 5500
temp1:        +41.0°C  (high = +110.0°C)

regis@regis-bureau:/usr/bin$

imposible de le faire descendre en dessous  de 4600 rpm

Dernière modification par joffrey (Le 17/10/2012, à 09:53)