#1 Le 31/07/2007, à 19:14
- pitch74
[RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Bonjour a tous!
Deja utilisateur de Kubuntu (Dapper) de maniere evenementielle, j'ai decidé de faire le grand saut et de m'installer ubuntu feisty sur mon PC. Marre de win et de ses logiciels ........
Seulement je suis novice et (heureusement orienté par Samheg du forum) j'ai de petits soucis suite a mon instal ubuntu. Je cherche une aide a mon probleme et une personne qui pourrait m'aider. Je detaille:
Essai instal de Ubuntu Feisty en live CD, ecran noir suite au lancement du live cd
Je charge donc la version alternate CD de ubuntu feisty, demarrage de l'install pas de problemes tout se passe bien excepté au 1 er demarrage, apres un petit temps d'attente l'ecran passe en "console" et je vois marqué qu'il y a 5 erreurs corrigée->reboot automatique.
re 1er demarrage (cd sortit) en mode normal et ecran noir, pas de voyant verr num possible sur le clavier, ni de maj, pas de ctr/alt/f1 ou backspace possible, toujours cet ecran noir.
Je demarre donc en recovery mode, pilote NV ds xconf, je lance GDM pas de probleme il demarre, juste un defaut: HAL a eu un probleme et a du s'arreter.
Je met a jour mon pilote de carte graphique NVIDIA (via ethernet) tout se passe bien. Je vais pour configurer mon WIFI et impossible d'avoir l'acces au panneau résau: droits insufisants (mode recovery?).
Bref j'essaye de redemarrer en mode normal avec le bon driver graphique (acceleration 3D en mode recovery ok) et pareil ecran noir.
j'ai donc pris le fichier dmesg que je vous colle ci joint et vous donne ma config. J'aimerai bien demarrer en mode normal et configurer mon WIFI...
Config :
Carte mere ASUS M2V-MX
Carte graphique ASUS NVidia EN7300LE TOP
Proc athlon 64X2 3800+
Memoire Jetram pc2 5300 512 MO
Disque dur Maxtor 160GO SATA
souris et clavier ps2
graveur cd et lecteur DVD ATA
le dmesg:
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009b000 end: 000000000009b000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009b000 size: 0000000000005000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e9c40 size: 00000000000163c0 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001feb0000 end: 000000001ffb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ffb0000 size: 000000000000e000 end: 000000001ffbe000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ffbe000 size: 0000000000022000 end: 000000001ffe0000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ffe0000 size: 0000000000020000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fecc0000 size: 0000000000001000 end: 00000000fecc1000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9c40 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffbe000 - 000000001ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 130992) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130992
[ 0.000000] HighMem 130992 -> 130992
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130992
[ 0.000000] On node 0 totalpages: 130992
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125905 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fa910
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000631 MSFT 0x00000097) @ 0x1ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x10000631 MSFT 0x00000097) @ 0x1ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x10000631 MSFT 0x00000097) @ 0x1ffb0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x10000631 MSFT 0x00000097) @ 0x1ffb0400
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000631 MSFT 0x00000097) @ 0x1ffbe040
[ 0.000000] ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0x1ffb59c0
[ 0.000000] ACPI: DSDT (v001 A0654 A0654000 0x00000000 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 2000.136 MHz processor.
[ 15.233659] Built 1 zonelists. Total pages: 129969
[ 15.233662] Kernel command line: root=UUID=6f86c5c1-70c5-440a-be2d-82632cfb94e8 ro single
[ 15.233787] mapped APIC to ffffd000 (fee00000)
[ 15.233790] mapped IOAPIC to ffffc000 (fec00000)
[ 15.233792] mapped IOAPIC to ffffb000 (fecc0000)
[ 15.233795] Enabling fast FPU save and restore... done.
[ 15.233797] Enabling unmasked SIMD FPU exception support... done.
[ 15.233805] Initializing CPU#0
[ 15.233860] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 15.236388] Console: colour VGA+ 80x25
[ 15.240233] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.240486] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.248597] Memory: 508464k/523968k available (1992k kernel code, 15004k reserved, 893k data, 328k init, 0k highmem)
[ 15.248684] virtual kernel memory layout:
[ 15.248685] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.248687] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.248688] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 15.248689] lowmem : 0xc0000000 - 0xdffb0000 ( 511 MB)
[ 15.248690] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 15.248691] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 15.248693] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 15.249194] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.325690] Calibrating delay using timer specific routine.. 4002.45 BogoMIPS (lpj=8004915)
[ 15.325846] Security Framework v1.0.0 initialized
[ 15.325911] SELinux: Disabled at boot.
[ 15.325987] Mount-cache hash table entries: 512
[ 15.326149] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 15.326157] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.326224] CPU: L2 Cache: 512K (64 bytes/line)
[ 15.326287] CPU 0(2) -> Core 0
[ 15.326348] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 15.326356] Compat vDSO mapped to ffffe000.
[ 15.326420] Remapping vsyscall page to ffffe000
[ 15.326489] Checking 'hlt' instruction... OK.
[ 15.341813] SMP alternatives: switching to UP code
[ 15.342174] Early unpacking initramfs... done
[ 15.616207] ACPI: Core revision 20060707
[ 15.616697] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 15.619295] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 15.619472] SMP alternatives: switching to SMP code
[ 15.619649] Booting processor 1/1 eip 3000
[ 15.629722] Initializing CPU#1
[ 15.708806] Calibrating delay using timer specific routine.. 4000.30 BogoMIPS (lpj=8000608)
[ 15.708812] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 15.708818] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.708821] CPU: L2 Cache: 512K (64 bytes/line)
[ 15.708823] CPU 1(2) -> Core 1
[ 15.708824] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 15.709105] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 15.709596] Total of 2 processors activated (8002.76 BogoMIPS).
[ 15.709857] ENABLING IO-APIC IRQs
[ 15.710090] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 15.856693] checking TSC synchronization across 2 CPUs:
[ 0.000058] CPU#0 had 77 usecs TSC skew, fixed it up.
[ 0.000121] CPU#1 had -77 usecs TSC skew, fixed it up.
[ 0.003938] Brought up 2 CPUs
[ 0.093136] migration_cost=304
[ 0.093517] Booting paravirtualized kernel on bare hardware
[ 0.093683] Time: 18:26:33 Date: 06/31/107
[ 0.093772] NET: Registered protocol family 16
[ 0.093908] EISA bus registered
[ 0.093971] ACPI: bus type pci registered
[ 0.094718] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.094783] PCI: Using configuration type 1
[ 0.094845] Setting up standard PCI resources
[ 0.105827] ACPI: Interpreter enabled
[ 0.105891] ACPI: Using IOAPIC for interrupt routing
[ 0.106175] Error attaching device data
[ 0.106241] Error attaching device data
[ 0.107187] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.107254] PCI: Probing PCI hardware (bus 00)
[ 0.108496] Boot video device is 0000:02:00.0
[ 0.109034] PCI: Transparent bridge - 0000:00:13.1
[ 0.109151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.132917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.133035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.133351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 0.139393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.139544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.142150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.143019] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.143888] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.144754] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.145683] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.146549] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.147520] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.148498] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.149249] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.149322] pnp: PnP ACPI init
[ 0.154982] pnp: PnP ACPI: found 16 devices
[ 0.155046] PnPBIOS: Disabled by ACPI PNP
[ 0.155159] PCI: Using ACPI for IRQ routing
[ 0.155223] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.173336] NET: Registered protocol family 8
[ 0.173400] NET: Registered protocol family 20
[ 0.174424] pnp: 00:07: ioport range 0xc00-0xc0f has been reserved
[ 0.174491] pnp: 00:07: ioport range 0xd00-0xd0f has been reserved
[ 0.174557] pnp: 00:07: ioport range 0xa20-0xa2f has been reserved
[ 0.174623] pnp: 00:07: ioport range 0xa30-0xa3f has been reserved
[ 0.174953] PCI: Bridge: 0000:00:01.0
[ 0.175015] IO window: disabled.
[ 0.175079] MEM window: disabled.
[ 0.175142] PREFETCH window: disabled.
[ 0.175207] PCI: Bridge: 0000:00:02.0
[ 0.175268] IO window: disabled.
[ 0.175333] MEM window: f9000000-fbcfffff
[ 0.175397] PREFETCH window: d0000000-dfffffff
[ 0.175463] PCI: Bridge: 0000:00:03.0
[ 0.175526] IO window: d000-dfff
[ 0.175591] MEM window: fbd00000-fbdfffff
[ 0.175658] PREFETCH window: disabled.
[ 0.175724] PCI: Bridge: 0000:00:13.0
[ 0.175785] IO window: disabled.
[ 0.175849] MEM window: fbe00000-fbefffff
[ 0.175913] PREFETCH window: disabled.
[ 0.175978] PCI: Bridge: 0000:00:13.1
[ 0.176041] IO window: e000-efff
[ 0.176105] MEM window: fbf00000-fbffffff
[ 0.176169] PREFETCH window: 30000000-300fffff
[ 0.176248] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.176262] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[ 0.176388] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.176402] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17
[ 0.176528] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.176538] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 0.176549] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 0.176584] NET: Registered protocol family 2
[ 0.219612] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.219765] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.219965] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.220087] TCP: Hash tables configured (established 16384 bind 8192)
[ 0.220153] TCP reno registered
[ 0.231612] checking if image is initramfs... it is
[ 0.778015] Freeing initrd memory: 6783k freed
[ 1.300000] audit: initializing netlink socket (disabled)
[ 1.300000] audit(1185906393.484:1): initialized
[ 1.300000] VFS: Disk quotas dquot_6.5.1
[ 1.300000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.300000] io scheduler noop registered
[ 1.300000] io scheduler anticipatory registered
[ 1.300000] io scheduler deadline registered
[ 1.300000] io scheduler cfq registered (default)
[ 1.300000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.300000] assign_interrupt_mode Found MSI capability
[ 1.300000] Allocate Port Service[0000:00:02.0:pcie00]
[ 1.300000] Allocate Port Service[0000:00:02.0:pcie02]
[ 1.300000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.300000] assign_interrupt_mode Found MSI capability
[ 1.300000] Allocate Port Service[0000:00:03.0:pcie00]
[ 1.300000] Allocate Port Service[0000:00:03.0:pcie02]
[ 1.300000] isapnp: Scanning for PnP cards...
[ 1.652000] isapnp: No Plug & Play device found
[ 1.676000] Real Time Clock Driver v1.12ac
[ 1.676000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.676000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.676000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.680000] mice: PS/2 mouse device common for all mice
[ 1.680000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.680000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.680000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.680000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.680000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.680000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.680000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.680000] EISA: Probing bus 0 at eisa.0
[ 1.680000] EISA: Detected 0 cards.
[ 1.712000] TCP cubic registered
[ 1.712000] NET: Registered protocol family 1
[ 1.712000] Starting balanced_irq
[ 1.712000] Using IPI No-Shortcut mode
[ 1.712000] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.712000] Magic number: 15:619:444
[ 1.712000] Freeing unused kernel memory: 328k freed
[ 1.716000] Time: acpi_pm clocksource has been installed.
[ 1.728000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.872000] Capability LSM initialized
[ 1.904000] ACPI: Processor [P001] (supports 16 throttling states)
[ 2.252000] usbcore: registered new interface driver usbfs
[ 2.252000] usbcore: registered new interface driver hub
[ 2.252000] usbcore: registered new device driver usb
[ 2.252000] USB Universal Host Controller Interface driver v3.0
[ 2.252000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 2.256000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.256000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.256000] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000bc00
[ 2.256000] usb usb1: configuration #1 chosen from 1 choice
[ 2.256000] hub 1-0:1.0: USB hub found
[ 2.256000] hub 1-0:1.0: 2 ports detected
[ 2.352000] SCSI subsystem initialized
[ 2.356000] libata version 2.20 loaded.
[ 2.360000] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 22 (level, low) -> IRQ 19
[ 2.360000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.360000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 2.360000] uhci_hcd 0000:00:10.1: irq 19, io base 0x0000b880
[ 2.360000] usb usb2: configuration #1 chosen from 1 choice
[ 2.360000] hub 2-0:1.0: USB hub found
[ 2.360000] hub 2-0:1.0: 2 ports detected
[ 2.376000] Floppy drive(s): fd0 is 1.44M
[ 2.392000] 8139too Fast Ethernet driver 0.9.28
[ 2.404000] FDC 0 is a post-1991 82077
[ 2.464000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 20
[ 2.464000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.464000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 2.464000] uhci_hcd 0000:00:10.2: irq 20, io base 0x0000b800
[ 2.464000] usb usb3: configuration #1 chosen from 1 choice
[ 2.464000] hub 3-0:1.0: USB hub found
[ 2.464000] hub 3-0:1.0: 2 ports detected
[ 2.568000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 2.568000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.568000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 2.568000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b480
[ 2.568000] usb usb4: configuration #1 chosen from 1 choice
[ 2.568000] hub 4-0:1.0: USB hub found
[ 2.568000] hub 4-0:1.0: 2 ports detected
[ 2.672000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20
[ 2.672000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.672000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 2.672000] ehci_hcd 0000:00:10.4: irq 20, io mem 0xf8fffc00
[ 2.672000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.672000] usb usb5: configuration #1 chosen from 1 choice
[ 2.672000] hub 5-0:1.0: USB hub found
[ 2.672000] hub 5-0:1.0: 8 ports detected
[ 2.776000] ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 2.776000] eth0: RealTek RTL8139 at 0xe084ec00, 00:80:ad:74:f4:7d, IRQ 22
[ 2.776000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.776000] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 2.776000] eth1: RealTek RTL8139 at 0xe085e800, 00:18:f3:fe:dc:16, IRQ 18
[ 2.776000] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.776000] ahci 0000:03:00.0: version 2.1
[ 2.776000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 23
[ 2.780000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)file:///usr/share/ubuntu-artwork/home/locales/index-fr_FR.html
[ 3.780000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 3.780000] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 3.780000] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 3.780000] ata1: SATA max UDMA/133 cmd 0xe08a8100 ctl 0x00000000 bmdma 0x00000000 irq 23
[ 3.780000] ata2: SATA max UDMA/133 cmd 0xe08a8180 ctl 0x00000000 bmdma 0x00000000 irq 23
[ 3.780000] scsi0 : ahci
[ 4.092000] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.092000] scsi1 : ahci
[ 4.404000] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.408000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 4.408000] VP_IDE: chipset revision 7
[ 4.408000] VP_IDE: not 100% native mode: will probe irqs later
[ 4.408000] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 4.408000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
[ 4.408000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 4.408000] Probing IDE interface ide0...
[ 5.552000] hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
[ 5.608000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.608000] Probing IDE interface ide1...
[ 6.472000] hdc: CW058D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
[ 7.144000] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.144000] sata_via 0000:00:0f.0: version 2.1
[ 7.144000] ACPI: PCI Interrupt 0000:00:0f.0[b] -> GSI 21 (level, low) -> IRQ 20
[ 7.148000] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 7.148000] ata3: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 20
[ 7.148000] ata4: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 20
[ 7.148000] scsi2 : sata_via
[ 7.152000] hdb: ATAPI 16X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 7.152000] Uniform CD-ROM driver Revision: 3.20
[ 7.156000] hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 7.352000] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 7.352000] ATA: abnormal status 0x7F on port 0x0001cc07
[ 7.356000] scsi3 : sata_via
[ 7.560000] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.716000] ATA: abnormal status 0x7F on port 0x0001c807
[ 7.732000] ATA: abnormal status 0x7F on port 0x0001c807
[ 7.776000] ata4.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 7.776000] ata4.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
[ 7.776000] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 7.836000] ata4.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 7.836000] ata4.00: configured for UDMA/133
[ 7.836000] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 7.836000] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 7.836000] ACPI: PCI Interrupt 0000:03:00.1[b] -> GSI 29 (level, low) -> IRQ 24
[ 7.836000] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 7.836000] ata5: PATA max UDMA/100 cmd 0x0001dc00 ctl 0x0001d882 bmdma 0x0001d400 irq 24
[ 7.836000] ata6: PATA max UDMA/100 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d408 irq 24
[ 7.836000] scsi4 : pata_jmicron
[ 7.840000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 7.840000] sda: Write Protect is off
[ 7.840000] sda: Mode Sense: 00 3a 00 00
[ 7.840000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.840000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 7.840000] sda: Write Protect is off
[ 7.840000] sda: Mode Sense: 00 3a 00 00
[ 7.840000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.844000] sda: sda1 sda2 sda3 sda4
[ 7.912000] sd 3:0:0:0: Attached scsi disk sda
[ 7.916000] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 7.992000] scsi5 : pata_jmicron
[ 8.148000] ATA: abnormal status 0x7F on port 0x0001d807
[ 8.308000] Attempting manual resume
[ 8.308000] swsusp: Resume From Partition 8:3
[ 8.308000] PM: Checking swsusp image.
[ 8.324000] PM: Resume from disk failed.
[ 8.348000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.352000] EXT3-fs: write access will be enabled during recovery.
[ 8.496000] kjournald starting. Commit interval 5 seconds
[ 8.496000] EXT3-fs: recovery complete.
[ 8.496000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.540000] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 17.564000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.652000] agpgart: Detected VIA VT3336 chipset
[ 17.656000] agpgart: AGP aperture is 128M @ 0xc8000000
[ 17.824000] NET: Registered protocol family 17
[ 17.892000] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 16 (level, low) -> IRQ 25
[ 17.892000] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
[ 17.932000] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 17.932000] rt2500 EEPROM: 8 8 8 8 8 7 7 7 7 7 7 7 6 6 dBm Maximum
[ 17.936000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.936000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.976000] parport: PnPBIOS parport detected.
[ 17.976000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.004000] input: PC Speaker as /class/input/input2
[ 18.392000] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 18.392000] PCI: Setting latency timer of device 0000:04:01.0 to 64
[ 18.600000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 18.808000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 18.840000] lp0: using parport0 (interrupt-driven).
[ 18.892000] Adding 489972k swap on /dev/disk/by-uuid/ef2cb58b-8425-479d-9369-8618c094e23c. Priority:-1 extents:1 across:489972k
[ 19.104000] EXT3 FS on sda2, internal journal
[ 19.412000] kjournald starting. Commit interval 5 seconds
[ 19.412000] EXT3 FS on sda4, internal journal
[ 19.412000] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.456000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 19.560000] NTFS volume version 3.1.Merci a tous ceux qui prendrons du temps pour me lire et me repondre , longue vie a ubuntu!!!
Yann
Edit: Utilise les balises [ Code ] lorsque tu colles du texte au kilomètre ;)
Dernière modification par pitch74 (Le 20/08/2007, à 22:04)
Hors ligne
#2 Le 31/07/2007, à 19:34
- pitch74
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
je rajoute la fin du code qui n'est pas present ci dessus: (merci a michel)
[ 20.444000] NET: Registered protocol family 10
[ 20.444000] lo: Disabled Privacy Extensions
[ 31.056000] eth1: no IPv6 routers present
[ 31.320000] ra0: no IPv6 routers present
[ 32.164000] hda-intel: Invalid position buffer, using LPIB read method instea
d.Merci
Dernière modification par pitch74 (Le 31/07/2007, à 19:38)
Hors ligne
#3 Le 03/08/2007, à 21:36
- vidou
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
j'ai le meme probleme et j'ai la meme configuration materielle bizarre non !!
j' ai tout essayé imossible de voir quoi que ce soit
Hors ligne
#4 Le 03/08/2007, à 21:46
- Oyster
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
A-tu essayé de reconfigurer ton Xorg :
-A l'ecran noir tu fait :
ctrl+alt+f1Ensuite :
-login/mot de passe, et :
sudo dpkg-reconfigure xserver-xorgUbuntu Lucid Lynx
Portable AMD Athlon(tm) 64 X2 Dual Core Processor TK-57 GeForce 7000M
Hors ligne
#5 Le 10/08/2007, à 18:50
- pitch74
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Bonjour Oyster
Merci pour ta solution, helas impossible de faire un edit de mon xorg car lorsque l"ecran est noir impossible de faire crtl alt f1, rien ne se passe...
J"ai donc abandonné provisoirement l"install de ubuntu sur ma tour,( par contre je viens de m'acheter un ordi portable et vista a tourné meme pas 10 mn dessus...UBUNTU POWAAAA.)
Je pense attendre la prochaine version de ubuntu pour ma tour car je pense que c'est un probleme de drivers qui sera corrigé dans une future version. A moins que quelqu'un trouve un moyen de m'aider
Merci a tous ceux qui prennent le temps
Hors ligne
#6 Le 15/08/2007, à 18:56
- guillaumeavril
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Salut,
J'ai aussi eu des problème avec une Asus M2V et ubuntu. Finalement il s'agit d'un bug de la carte mère ou du noyau. Essaie de booter en désactivant acpi et apic pour voir si ça marche.
Je ne sais pas de quelle façon on fait avec le livecd mais le but est de lancer le noyau avec l'option noacpi et acpi=off . Voilà
Bonne chance
#7 Le 15/08/2007, à 18:57
- guillaumeavril
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
edit : avec noapic et acpi=off
#8 Le 15/08/2007, à 19:49
- tux4fun
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Salut,
Je crois que Asus M2V utilise le driver Unichrome non présent dans les dépôts Ubuntu "supportés", install
xserver-xorg-video-unichrome - X.Org X server -- VIA display driver
Info du paquet:
sudo apt-cache show xserver-xorg-video-unichrome - X.Org X server -- VIA display driver
Package: xserver-xorg-video-unichrome
Priority: optional
Section: universe/x11
Installed-Size: 248
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: i386
Version: 1:0.2.6.99-0ubuntu1
Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-video-via
Provides: xserver-xorg-video-1.0
Depends: libc6 (>= 2.5-0ubuntu1), xserver-xorg-core (>= 1:1.1.1)
Conflicts: xserver-xorg-video-via
Filename: pool/universe/x/xserver-xorg-video-unichrome/xserver-xorg-video-unichrome_0.2.6.99-0ubuntu1_i386.deb
Size: 85494
MD5sum: 0264a434d8df22c26391d07e173ee343
SHA1: f5eef55d7355aaad32d2cddf43e711ee098ad986
SHA256: ac322ac54dbfa069528cd73f28deb19a2d0c3a656595e712596d069fa46b1c9b
Description: X.Org X server -- VIA display driver
This driver for the X.Org X server (see xserver-xorg for a further description)
provides support for various VIA UniChrome cards, among them: VT3122, VT7205,
VT3108, VT3118, VT3344, VT3157, VT3230 and VT3343.
.
This driver is originally shipped to be loaded as 'via' on xorg.conf, but this
package renames it to 'unichrome', so it doesn't conflicts with the other VIA
driver already available on Ubuntu.
.
More information about X.Org can be found at:
<URL:http://xorg.freedesktop.org>
<URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
.
This module can be found as the module 'users/libv/xf86-video-unichrome' at
http://gitweb.freedesktop.org/, or alternatively, using git, via the url
git://people.freedesktop.org/~libv/xf86-video-unichrome
Bugs: mailto:ubuntu-users@lists.ubuntu.com
Origin: Ubuntu
--
---------------------------------------------------------------------------
Si un jour on te reproche que ton travail n'est pas un travail de
professionnel, dis toi que :
Des amateurs ont construit l'arche de Noé, et des professionnels le
Titanic.
---------------------------------------------------------------------------
Pensez librement : Linux thinking !
tux4fun
http://counter.li.org
Linux Registered User #363458
Machine Registered #261921
Dernière modification par tux4fun (Le 16/08/2007, à 18:51)
tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User #363458
Machine Registered #261921
Hors ligne
#9 Le 15/08/2007, à 20:54
- guillaumeavril
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Salut tux4fun,
C'est vrai, tu as raison, il y a aussi un problème avec Unichrome, je l'ai lu dans d'autres forum. Pour ma part je ne l'ai pas car j'ai une carte 3D. La solution que j'ai donné répond à un autre problème sur la M2V:
au bout d'un temps aléatoire, linux gèle et on ne peut plus avoir la main, on est obligé de faire 'reset'.
Ce problème n'existe que pour les Asus M2V et c'est pour cela que je le poste, ça peut servir si quelqu'un qui fait une recherche sur le forum. Après avoir cherché plus en avant sur ce problème, la solution est de rajouter pci=nomsi à la ligne de boot du noyau.
Enjoy ubuntu! 
#10 Le 16/08/2007, à 18:05
- pitch74
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Merci a vous pour vos reponses!
L'acpi sert a la gestion de l'alimentation pour les ordinateurs portables je crois. Le desactiver sur ma tour n'aura aucune icidence. Sinon je n'avait effectivement pas pensé au driver carte mere de ma ASUS.
Pour l'instant je ne suis pas chez moi, je rentre semaine pochaine, et bien sur j'essayerais tout ca et vous tient au courant de l'evolution.
Merci pour votre aide.
Hors ligne
#11 Le 20/08/2007, à 21:24
- pitch74
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
edit : avec noapic et acpi=off
Ou dois-je mettre ces valeurs? J'ai essayé dans le bios mais ca ne fonctionne pas (acpi disabled).
Sinon j'ai installé le package: xserver-xorg-video-unichrome et pareil ca ne fonctionne pas.
J'ai aussi édité dans grub sur la ligne du boot du kernel pci=nomsi mais ca n'a rien fait. De plus ca ne le mémorise pas (qand je redemmare le pc ca n'y est plus)
Que faire....
Hors ligne
#12 Le 20/08/2007, à 21:46
- pitch74
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
C'est bon j'y suis arrivé!
En fait j'avais mal écris noapic dans grub et j'avais mis: noacpi
Donc la soluce pour mon probleme:
Editer dans grub et faire ceci:
title Ubuntu, kernel 2.6.22-9-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-9-generic root=UUID=47499ff0-d484-46e1-82fb-ce6de7a412fa ro quiet splash noapic acpi=off
initrd /boot/initrd.img-2.6.22-9-generic
quiet
savedefauldonc a la ligne kernel /boot on voit bien qu'a la fin deux arguments on étés rajoutés
voila la ca demarre reste plus qu'a trouver comment le memoriser. je vous tiens au courant.
Dernière modification par pitch74 (Le 20/08/2007, à 21:48)
Hors ligne
#13 Le 20/08/2007, à 22:02
- pitch74
Re : [RESOLU]probleme 1er demarrage apres instal ubuntu feisty asus M2V
Alors probleme résolu.
Il suffit donc d'éditer le fichier suivant avec les droits super utilisateurs: /boot/grub/menu.lst
Rajouter les arguments noapic et acpi=off comme ci dessus, c'est a dire a la meme ligne dans le fichier (bien trouver la ligne correspondante (bon kernel, et pas le recovery mode). Enregitrez et redemarrez...chez moi ca fonctionne.
Merci a tous
Hors ligne