Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 22/10/2012, à 09:36

misst38

[resolu]Carte graphique Asus Zenbook ux32vd

Bonjour,

J'ai décidé d'installer ubuntu sur mon Asus Zenbook ux32vd. L'installation s'est bien passé mais j'ai des problèmes avec mes cartes graphiques. Logiquement j'ai deux cartes graphique : Intel HD graphic 4000 et NVIDIA GT 620M. Le problème c'est que lorsque je démarre l'écran reste noir. Par contre si j'utilise un écran externe avec un cable hdmi cela fonctionne. J'ai vérifié dans les paramètres du système, aucune des deux cartes n'apparait!

Est-ce qu'il y aurait un moyen de permettre la reconnaissance des cartes?

Merci pour vos réponses.

Dernière modification par misst38 (Le 02/12/2012, à 14:45)

Hors ligne

#2 Le 22/10/2012, à 09:44

winux12

Re : [resolu]Carte graphique Asus Zenbook ux32vd


La LIBERTE n'a pas de prix ... Dell E7270 - Core I7 - 16 Go Ram
TuxLibre - ARU2L
Adhérent à l'APRIL
1 Photo - 1 Jour   Twitter 

Hors ligne

#3 Le 22/10/2012, à 09:58

misst38

Re : [resolu]Carte graphique Asus Zenbook ux32vd

Oui j'ai lu l'article et j'ai réalisé les manips mais j'ai toujours mon écran noir.

Hors ligne

#4 Le 22/10/2012, à 16:52

ArchangeGabriel

Re : [resolu]Carte graphique Asus Zenbook ux32vd

Est-ce que tu peux copier le contenu du ficher /var/log/Xorg.0.log ?

Hors ligne

#5 Le 23/10/2012, à 08:58

misst38

Re : [resolu]Carte graphique Asus Zenbook ux32vd

[    14.759]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    14.759] X Protocol Version 11, Revision 0
[    14.759] Build Operating System: Linux 3.2.0-26-generic i686 Ubuntu
[    14.759] Current Operating System: Linux marie-UX32VD 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:27:31 UTC 2012 i686
[    14.759] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=ded91343-f320-4b3b-8b7a-e9af1d97b52c ro quiet splash vt.handoff=7
[    14.759] Build Date: 08 October 2012  03:34:08PM
[    14.759] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[    14.759] Current version of pixman: 0.26.0
[    14.759]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    14.759] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.759] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 23 09:51:45 2012
[    14.777] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.778] (==) No Layout section.  Using the first Screen section.
[    14.778] (==) No screen section available. Using defaults.
[    14.778] (**) |-->Screen "Default Screen Section" (0)
[    14.778] (**) |   |-->Monitor "<default monitor>"
[    14.778] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    14.778] (==) Automatically adding devices
[    14.778] (==) Automatically enabling devices
[    14.778] (==) Automatically adding GPU devices
[    14.778] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    14.778]     Entry deleted from font path.
[    14.778] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    14.778]     Entry deleted from font path.
[    14.778] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    14.778]     Entry deleted from font path.
[    14.778] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    14.778]     Entry deleted from font path.
[    14.778] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    14.778]     Entry deleted from font path.
[    14.778] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    14.778]     Entry deleted from font path.
[    14.778] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    14.778] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    14.778] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.778] (II) Loader magic: 0xb7709640
[    14.778] (II) Module ABI versions:
[    14.778]     X.Org ANSI C Emulation: 0.4
[    14.778]     X.Org Video Driver: 13.0
[    14.778]     X.Org XInput driver : 18.0
[    14.778]     X.Org Server Extension : 7.0
[    14.778] (II) config/udev: Adding drm device (/dev/dri/card0)
[    16.237] (--) PCI:*(0:0:2:0) 8086:0166:1043:1507 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    16.237] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.237] Initializing built-in extension Generic Event Extension
[    16.237] Initializing built-in extension SHAPE
[    16.237] Initializing built-in extension MIT-SHM
[    16.237] Initializing built-in extension XInputExtension
[    16.237] Initializing built-in extension XTEST
[    16.237] Initializing built-in extension BIG-REQUESTS
[    16.237] Initializing built-in extension SYNC
[    16.237] Initializing built-in extension XKEYBOARD
[    16.237] Initializing built-in extension XC-MISC
[    16.237] Initializing built-in extension SECURITY
[    16.237] Initializing built-in extension XINERAMA
[    16.237] Initializing built-in extension XFIXES
[    16.237] Initializing built-in extension RENDER
[    16.237] Initializing built-in extension RANDR
[    16.237] Initializing built-in extension COMPOSITE
[    16.237] Initializing built-in extension DAMAGE
[    16.237] Initializing built-in extension MIT-SCREEN-SAVER
[    16.237] Initializing built-in extension DOUBLE-BUFFER
[    16.237] Initializing built-in extension RECORD
[    16.237] Initializing built-in extension DPMS
[    16.237] Initializing built-in extension X-Resource
[    16.237] Initializing built-in extension XVideo
[    16.237] Initializing built-in extension XVideo-MotionCompensation
[    16.237] Initializing built-in extension XFree86-VidModeExtension
[    16.237] Initializing built-in extension XFree86-DGA
[    16.237] Initializing built-in extension XFree86-DRI
[    16.237] Initializing built-in extension DRI2
[    16.237] (II) LoadModule: "glx"
[    16.262] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.263] (II) Module glx: vendor="X.Org Foundation"
[    16.263]     compiled for 1.13.0, module version = 1.0.0
[    16.263]     ABI class: X.Org Server Extension, version 7.0
[    16.263] (==) AIGLX enabled
[    16.263] Loading extension GLX
[    16.263] (==) Matched intel as autoconfigured driver 0
[    16.263] (==) Matched intel as autoconfigured driver 1
[    16.263] (==) Matched vesa as autoconfigured driver 2
[    16.263] (==) Matched modesetting as autoconfigured driver 3
[    16.263] (==) Matched fbdev as autoconfigured driver 4
[    16.263] (==) Assigned the driver to the xf86ConfigLayout
[    16.263] (II) LoadModule: "intel"
[    16.263] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.263] (II) Module intel: vendor="X.Org Foundation"
[    16.263]     compiled for 1.13.0, module version = 2.20.9
[    16.263]     Module class: X.Org Video Driver
[    16.263]     ABI class: X.Org Video Driver, version 13.0
[    16.263] (II) LoadModule: "vesa"
[    16.263] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.263] (II) Module vesa: vendor="X.Org Foundation"
[    16.263]     compiled for 1.12.99.902, module version = 2.3.2
[    16.263]     Module class: X.Org Video Driver
[    16.263]     ABI class: X.Org Video Driver, version 13.0
[    16.263] (II) LoadModule: "modesetting"
[    16.263] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.263] (II) Module modesetting: vendor="X.Org Foundation"
[    16.263]     compiled for 1.13.0, module version = 0.5.0
[    16.263]     Module class: X.Org Video Driver
[    16.263]     ABI class: X.Org Video Driver, version 13.0
[    16.263] (II) LoadModule: "fbdev"
[    16.264] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.264] (II) Module fbdev: vendor="X.Org Foundation"
[    16.264]     compiled for 1.12.99.902, module version = 0.4.3
[    16.264]     Module class: X.Org Video Driver
[    16.264]     ABI class: X.Org Video Driver, version 13.0
[    16.264] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
[    16.264] (II) VESA: driver for VESA chipsets: vesa
[    16.264] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.264] (II) FBDEV: driver for framebuffer: fbdev
[    16.264] (++) using VT number 7

[    16.264] (II) intel(0): using device path '/dev/dri/card0'
[    16.264] (WW) Falling back to old probe method for vesa
[    16.264] (WW) Falling back to old probe method for modesetting
[    16.264] (WW) Falling back to old probe method for fbdev
[    16.264] (II) Loading sub module "fbdevhw"
[    16.264] (II) LoadModule: "fbdevhw"
[    16.279] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.279] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.279]     compiled for 1.13.0, module version = 0.0.2
[    16.279]     ABI class: X.Org Video Driver, version 13.0
[    16.279] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    16.280] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.280] (==) intel(0): RGB weight 888
[    16.280] (==) intel(0): Default visual is TrueColor
[    16.280] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[    16.280] (**) intel(0): Relaxed fencing enabled
[    16.280] (**) intel(0): Wait on SwapBuffers? enabled
[    16.280] (**) intel(0): Triple buffering? enabled
[    16.280] (**) intel(0): Framebuffer tiled
[    16.280] (**) intel(0): Pixmaps tiled
[    16.280] (**) intel(0): 3D buffers tiled
[    16.280] (**) intel(0): SwapBuffers wait enabled
[    16.280] (==) intel(0): video overlay key set to 0x101fe
[    16.280] (II) intel(0): Output eDP1 has no monitor section
[    16.280] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    16.280] (II) intel(0): Output VGA1 has no monitor section
[    16.296] (II) intel(0): Output HDMI1 has no monitor section
[    16.344] (II) intel(0): Output DP1 has no monitor section
[    16.344] (II) intel(0): EDID for output eDP1
[    16.344] (II) intel(0): Manufacturer: IVO  Model: 533  Serial#: 0
[    16.344] (II) intel(0): Year: 2012  Week: 2
[    16.344] (II) intel(0): EDID Version: 1.4
[    16.344] (II) intel(0): Digital Display Input
[    16.344] (II) intel(0): Undefined color depth
[    16.344] (II) intel(0): Digital interface is undefined
[    16.344] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
[    16.344] (II) intel(0): Gamma: 2.20
[    16.344] (II) intel(0): No DPMS capabilities specified
[    16.344] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    16.344] (II) intel(0): First detailed timing is preferred mode
[    16.344] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    16.344] (II) intel(0): redX: 0.590 redY: 0.352   greenX: 0.330 greenY: 0.578
[    16.344] (II) intel(0): blueX: 0.152 blueY: 0.129   whiteX: 0.312 whiteY: 0.328
[    16.344] (II) intel(0): Manufacturer's mask: 0
[    16.344] (II) intel(0): Supported detailed timing:
[    16.344] (II) intel(0): clock: 77.0 MHz   Image Size:  293 x 164 mm
[    16.344] (II) intel(0): h_active: 1366  h_sync: 1424  h_sync_end 1460 h_blank_end 1560 h_border: 0
[    16.344] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 778 v_blanking: 822 v_border: 0
[    16.344] (II) intel(0):  InfoVision
[    16.344] (II) intel(0):  M133NWN1 R1
[    16.344] (II) intel(0): EDID (in hex):
[    16.344] (II) intel(0):     00ffffffffffff0026cf330500000000
[    16.344] (II) intel(0):     02160104801d10780a0800975a549427
[    16.344] (II) intel(0):     21505400000001010101010101010101
[    16.344] (II) intel(0):     010101010101141e56c2500036303a24
[    16.344] (II) intel(0):     370025a4100000180000000000000000
[    16.344] (II) intel(0):     00000000000000000000000000fe0049
[    16.344] (II) intel(0):     6e666f566973696f6e0a2020000000fe
[    16.344] (II) intel(0):     004d3133334e574e31205231200a000b
[    16.344] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    16.344] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.344] (II) intel(0): Printing probed modes for output eDP1
[    16.344] (II) intel(0): Modeline "1366x768"x60.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    16.344] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    16.344] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    16.344] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.344] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.344] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    16.344] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.344] (II) intel(0): EDID for output VGA1
[    16.360] (II) intel(0): EDID for output HDMI1
[    16.408] (II) intel(0): EDID for output DP1
[    16.408] (II) intel(0): Output eDP1 connected
[    16.408] (II) intel(0): Output VGA1 disconnected
[    16.408] (II) intel(0): Output HDMI1 disconnected
[    16.408] (II) intel(0): Output DP1 disconnected
[    16.408] (II) intel(0): Using exact sizes for initial modes
[    16.408] (II) intel(0): Output eDP1 using initial mode 1366x768
[    16.408] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.408] (II) intel(0): Kernel page flipping support detected, enabling
[    16.408] (==) intel(0): DPI set to (96, 96)
[    16.408] (II) Loading sub module "fb"
[    16.408] (II) LoadModule: "fb"
[    16.408] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.408] (II) Module fb: vendor="X.Org Foundation"
[    16.408]     compiled for 1.13.0, module version = 1.0.0
[    16.408]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.408] (II) Loading sub module "dri2"
[    16.408] (II) LoadModule: "dri2"
[    16.408] (II) Module "dri2" already built-in
[    16.408] (II) UnloadModule: "vesa"
[    16.408] (II) Unloading vesa
[    16.408] (II) UnloadModule: "modesetting"
[    16.408] (II) Unloading modesetting
[    16.408] (II) UnloadModule: "fbdev"
[    16.408] (II) Unloading fbdev
[    16.408] (II) UnloadSubModule: "fbdevhw"
[    16.408] (II) Unloading fbdevhw
[    16.408] (==) Depth 24 pixmap format is 32 bpp
[    16.408] (II) intel(0): [DRI2] Setup complete
[    16.408] (II) intel(0): [DRI2]   DRI driver: i965
[    16.408] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    16.409] (II) UXA(0): Driver registered support for the following operations:
[    16.409] (II)         solid
[    16.409] (II)         copy
[    16.409] (II)         composite (RENDER acceleration)
[    16.409] (II)         put_image
[    16.409] (II)         get_image
[    16.409] (==) intel(0): Backing store disabled
[    16.409] (==) intel(0): Silken mouse enabled
[    16.409] (II) intel(0): Initializing HW Cursor
[    16.409] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.410] (==) intel(0): DPMS enabled
[    16.410] (==) intel(0): Intel XvMC decoder enabled
[    16.410] (II) intel(0): Set up textured video
[    16.410] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    16.410] (II) intel(0): direct rendering: DRI2 Enabled
[    16.410] (==) intel(0): hotplug detection: "enabled"
[    16.428] (--) RandR disabled
[    16.436] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    16.436] (II) AIGLX: enabled GLX_INTEL_swap_event
[    16.436] (II) AIGLX: enabled GLX_ARB_create_context
[    16.436] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    16.436] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    16.436] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    16.436] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    16.437] (II) AIGLX: Loaded and initialized i965
[    16.437] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.437] (II) intel(0): Setting screen physical size to 361 x 203
[    16.442] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    16.444] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    16.444] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.444] (II) LoadModule: "evdev"
[    16.445] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.445] (II) Module evdev: vendor="X.Org Foundation"
[    16.445]     compiled for 1.13.0, module version = 2.7.3
[    16.445]     Module class: X.Org XInput Driver
[    16.445]     ABI class: X.Org XInput driver, version 18.0
[    16.445] (II) Using input driver 'evdev' for 'Video Bus'
[    16.445] (**) Video Bus: always reports core events
[    16.445] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    16.445] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    16.445] (--) evdev: Video Bus: Found keys
[    16.445] (II) evdev: Video Bus: Configuring as keyboard
[    16.445] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[    16.445] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    16.445] (**) Option "xkb_rules" "evdev"
[    16.445] (**) Option "xkb_model" "pc105"
[    16.445] (**) Option "xkb_layout" "fr"
[    16.445] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.447] (II) XKB: reuse xkmfile /var/lib/xkb/server-074A4E292903C58E6B74FF25DE1606FEF5E6A122.xkm
[    16.447] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    16.447] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.447] (II) Using input driver 'evdev' for 'Video Bus'
[    16.447] (**) Video Bus: always reports core events
[    16.447] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    16.447] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    16.447] (--) evdev: Video Bus: Found keys
[    16.447] (II) evdev: Video Bus: Configuring as keyboard
[    16.447] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input7/event7"
[    16.447] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    16.447] (**) Option "xkb_rules" "evdev"
[    16.447] (**) Option "xkb_model" "pc105"
[    16.447] (**) Option "xkb_layout" "fr"
[    16.447] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.448] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.448] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.448] (II) Using input driver 'evdev' for 'Power Button'
[    16.448] (**) Power Button: always reports core events
[    16.448] (**) evdev: Power Button: Device: "/dev/input/event1"
[    16.448] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.448] (--) evdev: Power Button: Found keys
[    16.448] (II) evdev: Power Button: Configuring as keyboard
[    16.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    16.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    16.448] (**) Option "xkb_rules" "evdev"
[    16.448] (**) Option "xkb_model" "pc105"
[    16.448] (**) Option "xkb_layout" "fr"
[    16.448] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.448] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    16.448] (II) No input driver specified, ignoring this device.
[    16.448] (II) This device may have been added with another device file.
[    16.448] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    16.448] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    16.448] (II) Using input driver 'evdev' for 'Sleep Button'
[    16.448] (**) Sleep Button: always reports core events
[    16.448] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    16.448] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    16.448] (--) evdev: Sleep Button: Found keys
[    16.448] (II) evdev: Sleep Button: Configuring as keyboard
[    16.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    16.448] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    16.448] (**) Option "xkb_rules" "evdev"
[    16.448] (**) Option "xkb_model" "pc105"
[    16.448] (**) Option "xkb_layout" "fr"
[    16.449] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.449] (II) config/udev: Adding drm device (/dev/dri/card0)
[    16.449] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    16.449] (II) No input driver specified, ignoring this device.
[    16.449] (II) This device may have been added with another device file.
[    16.449] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    16.449] (II) No input driver specified, ignoring this device.
[    16.449] (II) This device may have been added with another device file.
[    16.449] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event4)
[    16.449] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    16.449] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[    16.449] (**) USB2.0 HD UVC WebCam: always reports core events
[    16.449] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event4"
[    16.450] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb330
[    16.450] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[    16.450] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[    16.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4/event4"
[    16.450] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[    16.450] (**) Option "xkb_rules" "evdev"
[    16.450] (**) Option "xkb_model" "pc105"
[    16.450] (**) Option "xkb_layout" "fr"
[    16.450] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.450] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[    16.450] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    16.450] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    16.450] (**) Asus WMI hotkeys: always reports core events
[    16.450] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event5"
[    16.450] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    16.450] (--) evdev: Asus WMI hotkeys: Found keys
[    16.450] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    16.450] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input5/event5"
[    16.450] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[    16.450] (**) Option "xkb_rules" "evdev"
[    16.450] (**) Option "xkb_model" "pc105"
[    16.450] (**) Option "xkb_layout" "fr"
[    16.450] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.450] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    16.450] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.451] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.451] (**) AT Translated Set 2 keyboard: always reports core events
[    16.451] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    16.451] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    16.451] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    16.451] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    16.451] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    16.451] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    16.451] (**) Option "xkb_rules" "evdev"
[    16.451] (**) Option "xkb_model" "pc105"
[    16.451] (**) Option "xkb_layout" "fr"
[    16.451] (**) Option "xkb_variant" "oss_nodeadkeys"
[    16.451] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[    16.451] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    16.451] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    16.451] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    16.451] (II) LoadModule: "synaptics"
[    16.451] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    16.451] (II) Module synaptics: vendor="X.Org Foundation"
[    16.451]     compiled for 1.12.99.905, module version = 1.6.2
[    16.451]     Module class: X.Org XInput Driver
[    16.451]     ABI class: X.Org XInput driver, version 18.0
[    16.451] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    16.451] (**) ETPS/2 Elantech Touchpad: always reports core events
[    16.451] (**) Option "Device" "/dev/input/event6"
[    16.452] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    16.452] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    16.452] (**) ETPS/2 Elantech Touchpad: always reports core events
[    16.452] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[    16.452] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    16.452] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    16.452] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    16.452] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.051
[    16.452] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    16.452] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    16.452] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    16.452] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    16.452] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    16.452] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    16.452] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    16.457] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    16.457] (II) No input driver specified, ignoring this device.
[    16.457] (II) This device may have been added with another device file.
[    16.457] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    16.457] (II) No input driver specified, ignoring this device.
[    16.457] (II) This device may have been added with another device file.
[    16.848] (II) intel(0): EDID vendor "IVO", prod id 1331
[    16.848] (II) intel(0): Printing DDC gathered Modelines:
[    16.848] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    17.598] (II) intel(0): EDID vendor "IVO", prod id 1331
[    17.598] (II) intel(0): Printing DDC gathered Modelines:
[    17.598] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    23.310] (II) intel(0): EDID vendor "IVO", prod id 1331
[    23.310] (II) intel(0): Printing DDC gathered Modelines:
[    23.310] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    23.560] (II) intel(0): Allocated new frame buffer 2688x1024 stride 10752, tiled
[    32.009] (II) intel(0): EDID vendor "IVO", prod id 1331
[    32.009] (II) intel(0): Printing DDC gathered Modelines:
[    32.009] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    32.359] (II) intel(0): EDID vendor "IVO", prod id 1331
[    32.359] (II) intel(0): Printing DDC gathered Modelines:
[    32.359] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    32.666] (II) intel(0): EDID vendor "IVO", prod id 1331
[    32.666] (II) intel(0): Printing DDC gathered Modelines:
[    32.666] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    32.938] (II) intel(0): EDID vendor "IVO", prod id 1331
[    32.938] (II) intel(0): Printing DDC gathered Modelines:
[    32.938] (II) intel(0): Modeline "1366x768"x0.0   77.00  1366 1424 1460 1560  768 771 778 822 -hsync -vsync (49.4 kHz eP)
[    34.151] (II) XKB: reuse xkmfile /var/lib/xkb/server-AD9DDE4C9B206464025E1494485E5B0FF65628D1.xkm

Hors ligne

#6 Le 24/10/2012, à 08:34

misst38

Re : [resolu]Carte graphique Asus Zenbook ux32vd

J'ai oublié de préciser que j'étais sous ubuntu 12.10 avec comme kernel le 3.5-18.

Hors ligne

#7 Le 24/10/2012, à 08:54

ArchangeGabriel

Re : [resolu]Carte graphique Asus Zenbook ux32vd

C'est très bizarre, d'après ce log tout marche. Sinon, tu as regardé si ce n'était pas un problème de réglage de luminosité au minimum ou de rétro-éclairage éteint ?

Hors ligne

#8 Le 24/10/2012, à 09:48

misst38

Re : [resolu]Carte graphique Asus Zenbook ux32vd

l'éclairage est au maximum et l'écran est éclairé meme s'il reste noir

Hors ligne

#9 Le 24/10/2012, à 09:51

misst38

Re : [resolu]Carte graphique Asus Zenbook ux32vd

Et quand j'affiche les paramètres du système, il me met carte graphique inconnu

Dernière modification par misst38 (Le 24/10/2012, à 09:51)

Hors ligne

#10 Le 24/10/2012, à 19:52

Tarkun

Re : [resolu]Carte graphique Asus Zenbook ux32vd

J'ai le même problème sur la même machine (mais sous debian sid).
En désactivant KMS (en ajoutant i915.modeset=0 sur la ligne de grub) j'arrive à avoir l'affichage.
Par contre dès que l'écran s'éteint pour une raison ou pour une autre (veille, changement de résolution, etc...), il ne veut pas se rallumer, à moins d'executer cette commande : xset dpms force on (je l'ai bindé sur un raccourci clavier).
Ce n'est pas la solution idéale, mais au moins ca permet d'avoir une machine utilisable en attendant de trouver mieux.

Hors ligne

#11 Le 29/10/2012, à 17:22

freddom

Re : [resolu]Carte graphique Asus Zenbook ux32vd

Bonjour,
Après avoir installé kubuntu 12.10, j'ai eu le même problème sur mon ux32vd,
Puis  j'ai eu une idée : Quand l'écran était noir j'ai mis l'ordinateur en veille avec la combinaison de touches fn + F1 .
Quand j'ai réveillé le portable l'écran est réapparu ! Magique non !
J'espère que ça marchera pour vous.
En attendant une solution plus pérenne....

Hors ligne

#12 Le 19/11/2012, à 08:48

Roggan

Re : [resolu]Carte graphique Asus Zenbook ux32vd

Bonjour,

Même problème de mon côté. L'écran s'affiche avec l'option "i915.modeset=0" dans grub, mais ne permet donc pas d'accélération graphique, et donc pas de Cinnamon.

Je signal que de mon côté le problème n’apparaît que depuis le kernel 3.2.0-32-generic. (Je suis sous 3.2.0-31-generic pour Ubuntu 12.04, et tout fonctionne très bien). La MAJ du 3.2.0-34-generic ne résout pas le problème.

Hors ligne

#13 Le 02/12/2012, à 14:44

misst38

Re : [resolu]Carte graphique Asus Zenbook ux32vd

Bonjour,
Le problème est réglé en migrant vers le noyau 3.7.0-4-generic.

Hors ligne