Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#26 Le 02/09/2005, à 10:50

dam

Re : Lecture d'une Clé USB

Je viens d'avoir failed tu initialyse HAL, donc problème non résolu... Vivement breezy smile

dam


http://linuxandco.free.fr/

Hors ligne

#27 Le 02/09/2005, à 13:45

chimay

Re : Lecture d'une Clé USB

donc c pas encore totalement stable on dirait ... espèrons qu'avec la breezy ca s'améliore smile


* Linux est écolo : le code est tout vert
* Un dauphin nage plus vite qu'un nautile nain
* Le but d'un système d'exploitation est d'exploiter l'ordinateur, pas l'utilisateur
* Un ordinateur est composé d'un piano, d'une mangeuse de fromage, d'une mémoire d'éléphant, d'une dalle, d'un lecteur de galette, et d'un moulin, le célèbre moulin de la galette

Hors ligne

#28 Le 02/09/2005, à 15:44

laurent

Re : Lecture d'une Clé USB

chimay a écrit :

donc c pas encore totalement stable on dirait ... )

Hum. Je n'ai jamais vu une distib aussi stable de ma vie, mais bon... Forcément si tu te fies à quelques probs sur le forum...

(non, je n'ai jamais essayé debian) Perso, chez moi tout fonctionne à merveille depuis octobre 2004 wink


Laurent, petit belge explorant la banquise

Hors ligne

#29 Le 02/09/2005, à 20:25

dam

Re : Lecture d'une Clé USB

Je suis d'accord avec laurent, ubuntu est très très stable. J'ai juste un petit prob avec mes ports usb mais ça n'a rien a voir avec la stablilité du systeme...

Qu'une chose à dire : vive linux et vive Ubuntu big_smile

dam


http://linuxandco.free.fr/

Hors ligne

#30 Le 04/09/2005, à 21:30

chimay

Re : Lecture d'une Clé USB

laurent a écrit :
chimay a écrit :

donc c pas encore totalement stable on dirait ... )

Hum. Je n'ai jamais vu une distib aussi stable de ma vie, mais bon... Forcément si tu te fies à quelques probs sur le forum...

(non, je n'ai jamais essayé debian) Perso, chez moi tout fonctionne à merveille depuis octobre 2004 wink

j'utilise ubuntu de tps en tps et je me rends bien compte qu'elle est stable
je parlais de HAL et du gnome-volume-manager, pas de la distro tongue

Dernière modification par chimay (Le 04/09/2005, à 21:32)


* Linux est écolo : le code est tout vert
* Un dauphin nage plus vite qu'un nautile nain
* Le but d'un système d'exploitation est d'exploiter l'ordinateur, pas l'utilisateur
* Un ordinateur est composé d'un piano, d'une mangeuse de fromage, d'une mémoire d'éléphant, d'une dalle, d'un lecteur de galette, et d'un moulin, le célèbre moulin de la galette

Hors ligne

#31 Le 26/10/2005, à 20:42

Isaric

Re : Lecture d'une Clé USB

Kitty a écrit :

Quant tu insères ta clé USB, tape "dmesg" en ligne de commande. A la fin, il te sera indiqué dans quel périphérique la clé est lue (/dev/quelque_chose). Et, en prime, tu auras p'tet un message d'erreur t'indiquant pourquoi la clé ne se monte pas. Si c'est le cas, n'hésite pas à le rapporter ici.

isaric@acer:~$ sudo dmesg
odes e02a <keycode>' to make it known.
[4323850.566000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4323850.566000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4323850.650000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4323850.650000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4323850.785000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4323850.785000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4323967.627000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4323967.627000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4323967.733000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4323967.733000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4325098.814000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4325098.814000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4325098.949000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4325098.949000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4325177.530000] usb 4-6: USB disconnect, address 10
[4325226.446000] usb 4-6: new high speed USB device using ehci_hcd and address 11
[4325226.528000] scsi4 : SCSI emulation for USB Mass Storage devices
[4325226.529000] usb-storage: device found at 11
[4325226.529000] usb-storage: waiting for device to settle before scanning
[4325231.529000]   Vendor: USB 2.0   Model: 128MB Portable    Rev: 2.00
[4325231.529000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[4325231.609000] sde: Unit Not Ready, sense:
[4325231.609000] : Current: sense key: Unit Attention
[4325231.609000]     Additional sense: Not ready to ready change, medium may have changed
[4325231.651000] sde : READ CAPACITY failed.
[4325231.651000] sde : status=1, message=00, host=0, driver=08
[4325231.651000] sd: Current: sense key: Unit Attention
[4325231.651000]     Additional sense: Not ready to ready change, medium may have changed
[4325231.690000] sde: test WP failed, assume Write Enabled
[4325231.690000] sde: assuming drive cache: write through
[4325231.770000] sde: Unit Not Ready, sense:
[4325231.770000] : Current: sense key: Unit Attention
[4325231.770000]     Additional sense: Not ready to ready change, medium may have changed
[4325231.848000] sde : READ CAPACITY failed.
[4325231.848000] sde : status=1, message=00, host=0, driver=08
[4325231.848000] sd: Current: sense key: Unit Attention
[4325231.848000]     Additional sense: Not ready to ready change, medium may have changed
[4325231.850000] sde: test WP failed, assume Write Enabled
[4325231.850000] sde: assuming drive cache: write through
[4325231.852000] SCSI device sde: 256000 512-byte hdwr sectors (131 MB)
[4325231.853000] sde: Write Protect is off
[4325231.853000] sde: Mode Sense: 03 00 00 00
[4325231.853000] sde: assuming drive cache: write through
[4325231.853000]  /dev/scsi/host4/bus0/target0/lun0: p1 < p5 >
[4325231.857000] Attached scsi removable disk sde at scsi4, channel 0, id 0, lun 0
[4325231.858000] usb-storage: device scan complete
[4325461.030000] usb 4-6: USB disconnect, address 11
[4325463.669000] usb 3-2: new full speed USB device using ohci_hcd and address 6
[4325463.749000] usb 3-2: device descriptor read/64, error -110
[4325463.930000] usb 3-2: device descriptor read/64, error -110
[4325464.104000] usb 3-2: new full speed USB device using ohci_hcd and address 7
[4325464.184000] usb 3-2: device descriptor read/64, error -110
[4325464.365000] usb 3-2: device descriptor read/64, error -110
[4325464.539000] usb 3-2: new full speed USB device using ohci_hcd and address 8
[4325464.943000] usb 3-2: device not accepting address 8, error -110
[4325465.016000] usb 3-2: new full speed USB device using ohci_hcd and address 9
[4325465.420000] usb 3-2: device not accepting address 9, error -110
[4325701.260000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4325701.260000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4325701.366000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4325701.366000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326119.967000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4326119.967000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326120.103000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4326120.103000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326139.395000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4326139.395000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326139.531000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4326139.531000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326822.570000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4326822.570000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326822.676000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4326822.676000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4326935.446000] usb 4-6: new high speed USB device using ehci_hcd and address 13
[4326935.527000] scsi5 : SCSI emulation for USB Mass Storage devices
[4326935.528000] usb-storage: device found at 13
[4326935.528000] usb-storage: waiting for device to settle before scanning
[4326940.528000]   Vendor: USB 2.0   Model: 128MB Portable    Rev: 2.00
[4326940.528000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[4326940.608000] sde: Unit Not Ready, sense:
[4326940.608000] : Current: sense key: Unit Attention
[4326940.608000]     Additional sense: Not ready to ready change, medium may have changed
[4326940.650000] sde : READ CAPACITY failed.
[4326940.650000] sde : status=1, message=00, host=0, driver=08
[4326940.650000] sd: Current: sense key: Unit Attention
[4326940.650000]     Additional sense: Not ready to ready change, medium may have changed
[4326940.690000] sde: test WP failed, assume Write Enabled
[4326940.690000] sde: assuming drive cache: write through
[4326940.769000] sde: Unit Not Ready, sense:
[4326940.769000] : Current: sense key: Unit Attention
[4326940.769000]     Additional sense: Not ready to ready change, medium may have changed
[4326940.849000] sde : READ CAPACITY failed.
[4326940.849000] sde : status=1, message=00, host=0, driver=08
[4326940.849000] sd: Current: sense key: Unit Attention
[4326940.849000]     Additional sense: Not ready to ready change, medium may have changed
[4326940.850000] sde: Write Protect is off
[4326940.850000] sde: Mode Sense: 03 00 00 00
[4326940.850000] sde: assuming drive cache: write through
[4326940.852000] SCSI device sde: 256000 512-byte hdwr sectors (131 MB)
[4326940.853000] sde: Write Protect is off
[4326940.853000] sde: Mode Sense: 03 00 00 00
[4326940.853000] sde: assuming drive cache: write through
[4326940.853000]  /dev/scsi/host5/bus0/target0/lun0: p1 < p5 >
[4326940.857000] Attached scsi removable disk sde at scsi5, channel 0, id 0, lun 0
[4326940.858000] usb-storage: device scan complete
[4327505.780000] usb 4-6: USB disconnect, address 13
[4327607.946000] usb 4-6: new high speed USB device using ehci_hcd and address 14
[4327608.027000] scsi6 : SCSI emulation for USB Mass Storage devices
[4327608.028000] usb-storage: device found at 14
[4327608.028000] usb-storage: waiting for device to settle before scanning
[4327613.029000]   Vendor: USB 2.0   Model: 128MB Portable    Rev: 2.00
[4327613.029000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[4327613.109000] sde: Unit Not Ready, sense:
[4327613.109000] : Current: sense key: Unit Attention
[4327613.109000]     Additional sense: Not ready to ready change, medium may have changed
[4327613.151000] sde : READ CAPACITY failed.
[4327613.151000] sde : status=1, message=00, host=0, driver=08
[4327613.151000] sd: Current: sense key: Unit Attention
[4327613.151000]     Additional sense: Not ready to ready change, medium may have changed
[4327613.191000] sde: test WP failed, assume Write Enabled
[4327613.191000] sde: assuming drive cache: write through
[4327613.270000] sde: Unit Not Ready, sense:
[4327613.270000] : Current: sense key: Unit Attention
[4327613.270000]     Additional sense: Not ready to ready change, medium may have changed
[4327613.349000] sde : READ CAPACITY failed.
[4327613.349000] sde : status=1, message=00, host=0, driver=08
[4327613.349000] sd: Current: sense key: Unit Attention
[4327613.349000]     Additional sense: Not ready to ready change, medium may have changed
[4327613.351000] sde: test WP failed, assume Write Enabled
[4327613.351000] sde: assuming drive cache: write through
[4327613.352000] SCSI device sde: 256000 512-byte hdwr sectors (131 MB)
[4327613.353000] sde: Write Protect is off
[4327613.353000] sde: Mode Sense: 03 00 00 00
[4327613.353000] sde: assuming drive cache: write through
[4327613.353000]  /dev/scsi/host6/bus0/target0/lun0: p1 < p5 >
[4327613.357000] Attached scsi removable disk sde at scsi6, channel 0, id 0, lun 0
[4327613.359000] usb-storage: device scan complete
[4327621.849000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327621.849000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327621.984000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327621.984000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327672.126000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327672.126000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327672.232000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327672.232000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327672.345000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327672.345000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327672.451000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327672.451000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327673.163000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327673.163000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327673.295000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327673.295000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327673.557000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327673.557000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327673.693000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327673.693000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327674.492000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327674.492000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327674.628000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327674.628000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327674.978000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327674.978000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327675.140000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327675.140000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327675.733000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327675.733000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327675.839000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327675.839000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327675.923000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327675.923000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327676.029000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327676.029000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327676.379000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327676.379000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327676.515000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327676.515000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327677.227000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327677.227000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327677.392000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327677.392000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327677.894000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327677.894000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327678.089000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327678.089000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327687.628000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327687.628000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327688.245000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327688.245000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327701.550000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327701.550000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327701.715000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327701.715000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327704.280000] usb 4-6: USB disconnect, address 14
[4327708.446000] usb 4-6: new high speed USB device using ehci_hcd and address 15
[4327708.527000] scsi7 : SCSI emulation for USB Mass Storage devices
[4327708.528000] usb-storage: device found at 15
[4327708.528000] usb-storage: waiting for device to settle before scanning
[4327713.528000]   Vendor: USB 2.0   Model: 128MB Portable    Rev: 2.00
[4327713.528000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[4327713.531000] SCSI device sde: 256000 512-byte hdwr sectors (131 MB)
[4327713.531000] sde: Write Protect is off
[4327713.531000] sde: Mode Sense: 03 00 00 00
[4327713.531000] sde: assuming drive cache: write through
[4327713.535000] SCSI device sde: 256000 512-byte hdwr sectors (131 MB)
[4327713.536000] sde: Write Protect is off
[4327713.536000] sde: Mode Sense: 03 00 00 00
[4327713.536000] sde: assuming drive cache: write through
[4327713.536000]  /dev/scsi/host7/bus0/target0/lun0: p1 < p5 >
[4327713.539000] Attached scsi removable disk sde at scsi7, channel 0, id 0, lun 0
[4327713.540000] usb-storage: device scan complete
[4327720.556000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4327720.556000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4327720.721000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4327720.721000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.

Cela marchait tout seul sur breezy plus maintenant !
Ma clé ne monte pas toute seul ?:(

j'ai réinstallé UBUNTU Breezy et ma cle remonte ! Résolu pour moi.

Dernière modification par Isaric (Le 03/11/2005, à 14:37)


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.
ma config

Hors ligne

#32 Le 27/10/2005, à 01:58

Nemau

Re : Lecture d'une Clé USB

Salut,
j'ai posté un post dernièrement sur le sujet.  J'utilise Ubuntu 5.10 et mes clés usb ne se monte pas automatiquement, je dois faire en ligne de commande "sudo mount -a" et ma clé apparait sur le Desktop.  Je cherche la solution depuis un certain temps, comme plusieurs, et je n'ai pas encore trouvé de réponse.

#33 Le 27/10/2005, à 21:52

Athol

Re : Lecture d'une Clé USB

Kitty a écrit :

Quant tu insères ta clé USB, tape "dmesg" en ligne de commande. A la fin, il te sera indiqué dans quel périphérique la clé est lue (/dev/quelque_chose). Et, en prime, tu auras p'tet un message d'erreur t'indiquant pourquoi la clé ne se monte pas. Si c'est le cas, n'hésite pas à le rapporter ici.

Bonjour à tous,

Quand je fais un "dmesg" je reçois (entre autres):

[4297492.023000]  /dev/scsi/host1/bus0/target0/lun0: p1
[4297492.032000] Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun  0
[4297492.035000] usb-storage: device scan complete

Si ça peu vous aider à m'aider??????........

@+++++

Hors ligne

Haut de page ↑