#1 Le 23/10/2012, à 03:39
- Arkandias
Clavier et souris logitech sans fil extrêmement lents !
Bonjour à tous,
J'ai un clavier et une souris sans fil (Logitech, K230 et MX Performance). Je viens de me faire une config (Asus P8H77-I, Intel i5 3570K, Carte graphique intégrée Intel HD Graphics 4000). Mon problème c'est que la souris et le clavier rament :
- la souris se déplace par acoups et très doucement
- le clavier tape les lettres avec 3 secondes de retards (et en oublie certaines ou en double d'autres)
Ces périphériques utilise la technologie Unifying de Logitech.
J'ai vu certains rapports de bug similaire (ex : https://bugs.launchpad.net/ubuntu/+sour … g/1037149) mais pas de solution...
Si quelqu'un a une idée... merci d'avance !
Hors ligne
#2 Le 23/10/2012, à 09:03
- F50
Re : Clavier et souris logitech sans fil extrêmement lents !
Salut,
J'ai aussi cette technologie mais avec une M705 et un K800 sous Xubuntu et aucun ralentissement à signaler, au contraire c'est hyper speed même trop des fois. C'est peut-être lié à compiz? Essaye de le désactiver ou de changer de port usb ou de régler les paramètres clavier/souri différemment.
#3 Le 23/10/2012, à 11:43
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Sur mon pc portable (avec Ubuntu également) pas de problème. Les réglages n'y font rien. Quant à changer de port USB c'est très étonnant : certains ne reconnaissent pas le recepteur Unifying ; après quelques changements de ports consécutifs ça peut aller un peu mieux mais ça lagge quand même. Autre bizarerie : si je connecte une clé usb par exemple ça empire le phénomène...
Hors ligne
#4 Le 24/10/2012, à 13:31
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
En fait ça rame (clavier / souris) par périodes... En fonction du port sur lequel je branche le récepteur la fréquence des ramages peut varier (ça peut même ne rien reconnaitre du tout !). Par contre c'est vraiment que le clavier et la souris : l'ordinateur peut lire une vidéo HD et décompresser plusieurs fichiers sans aucun ralentissement pendant que le clavier et la souris galèrent...
Hors ligne
#5 Le 25/10/2012, à 07:27
- F50
Re : Clavier et souris logitech sans fil extrêmement lents !
Mouais... Tape lsmod et regarde si le module hid_logitech_dj est bien charger, puis tape sudo modprobe hid_logitech_dj pour voir si il n'y a pas d'erreur. Mais franchement je ne vois pas très bien d'où ça peut venir. Poste aussi le contenu /var/log/Xorg.0.log. Tu as bien le pilote graphique installé pour ta carte et sous quelle version buntu es-tu?
P.S. Ton lien du bug au #1 ne mène nulle part.
Dernière modification par faucon50 (Le 25/10/2012, à 07:28)
#6 Le 25/10/2012, à 12:38
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
En effet le lien ne marche plus... je vais essayer de retrouver le bug sur Launchpad.
En attendant :
arkandias@JYH:~$ lsmod
Module Size Used by
snd_hda_codec_hdmi 32007 1
snd_hda_codec_via 46478 1
rfcomm 46619 0
bnep 18140 2
bluetooth 209199 10 rfcomm,bnep
parport_pc 32688 0
ppdev 17073 0
kvm 414070 0
ghash_clmulni_intel 13180 0
aesni_intel 51037 0
cryptd 20403 2 ghash_clmulni_intel,aesni_intel
aes_x86_64 17208 1 aesni_intel
snd_hda_intel 33491 3
snd_hda_codec 134212 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
eeepc_wmi 13109 0
asus_wmi 24088 1 eeepc_wmi
sparse_keymap 13890 1 asus_wmi
snd_pcm 96580 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi 13324 0
snd_rawmidi 30512 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61521 2 snd_seq_midi,snd_seq_midi_event
joydev 17457 0
snd_timer 29425 2 snd_pcm,snd_seq
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq
microcode 22803 0
snd 78734 16 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 95552 0
serio_raw 13215 0
i915 520519 3
drm_kms_helper 46784 1 i915
drm 275528 4 i915,drm_kms_helper
soundcore 15047 1 snd
snd_page_alloc 18484 2 snd_hda_intel,snd_pcm
mei 40690 0
i2c_algo_bit 13413 1 i915
lpc_ich 17061 0
wmi 19070 1 asus_wmi
video 19335 1 i915
mac_hid 13205 0
coretemp 13400 0
lp 17759 0
parport 46345 3 parport_pc,ppdev,lp
hid_logitech_dj 18604 0
usbhid 46947 1 hid_logitech_dj
hid 100366 2 hid_logitech_dj,usbhid
r8169 61650 0 sudo modprobe hid-logitech-dj n'affiche rien.
Sinon concernant la carte graphique, elle est bien reconnue (j'ai installé mesa-utils) et le driver xserver-xorg-video-intel est bien installé.
Cependant j'ai eu un bug (et apparemment je ne suis pas le seul) : de façon aléatoire le système démarrait avec un message d'erreur : "system in low graphic mode..." et le log du Xorg montrait l'erreur "no screens found". Ce bug a disparu mystérieusement (depuis un moment). Je ne sais pas si c'est lié...
Hors ligne
#7 Le 25/10/2012, à 12:43
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Voici le contenu de /var/log/Xorg.0.log
[ 4.053]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4.053] X Protocol Version 11, Revision 0
[ 4.053] Build Operating System: Linux 3.2.0-30-generic x86_64 Ubuntu
[ 4.053] Current Operating System: Linux JYH 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64
[ 4.053] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=fabc1db8-5537-421b-a01c-b032476cb2db ro quiet splash quiet splash vt.handoff=7
[ 4.053] Build Date: 08 October 2012 03:34:01PM
[ 4.053] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[ 4.053] Current version of pixman: 0.26.0
[ 4.053] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.053] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.053] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 25 12:39:25 2012
[ 4.054] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.054] (==) No Layout section. Using the first Screen section.
[ 4.054] (==) No screen section available. Using defaults.
[ 4.054] (**) |-->Screen "Default Screen Section" (0)
[ 4.054] (**) | |-->Monitor "<default monitor>"
[ 4.054] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.054] (==) Automatically adding devices
[ 4.054] (==) Automatically enabling devices
[ 4.054] (==) Automatically adding GPU devices
[ 4.054] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.054] Entry deleted from font path.
[ 4.054] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.054] Entry deleted from font path.
[ 4.054] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.054] Entry deleted from font path.
[ 4.054] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.054] Entry deleted from font path.
[ 4.054] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.054] Entry deleted from font path.
[ 4.054] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 4.054] Entry deleted from font path.
[ 4.054] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.054] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4.054] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.054] (II) Loader magic: 0x7fab06636c40
[ 4.054] (II) Module ABI versions:
[ 4.054] X.Org ANSI C Emulation: 0.4
[ 4.054] X.Org Video Driver: 13.0
[ 4.054] X.Org XInput driver : 18.0
[ 4.054] X.Org Server Extension : 7.0
[ 4.054] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.335] (--) PCI:*(0:0:2:0) 8086:0162:1043:84ca rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 4.335] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4.335] Initializing built-in extension Generic Event Extension
[ 4.335] Initializing built-in extension SHAPE
[ 4.335] Initializing built-in extension MIT-SHM
[ 4.335] Initializing built-in extension XInputExtension
[ 4.335] Initializing built-in extension XTEST
[ 4.335] Initializing built-in extension BIG-REQUESTS
[ 4.335] Initializing built-in extension SYNC
[ 4.335] Initializing built-in extension XKEYBOARD
[ 4.335] Initializing built-in extension XC-MISC
[ 4.335] Initializing built-in extension SECURITY
[ 4.335] Initializing built-in extension XINERAMA
[ 4.335] Initializing built-in extension XFIXES
[ 4.335] Initializing built-in extension RENDER
[ 4.335] Initializing built-in extension RANDR
[ 4.335] Initializing built-in extension COMPOSITE
[ 4.335] Initializing built-in extension DAMAGE
[ 4.335] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.335] Initializing built-in extension DOUBLE-BUFFER
[ 4.335] Initializing built-in extension RECORD
[ 4.335] Initializing built-in extension DPMS
[ 4.335] Initializing built-in extension X-Resource
[ 4.335] Initializing built-in extension XVideo
[ 4.335] Initializing built-in extension XVideo-MotionCompensation
[ 4.335] Initializing built-in extension XFree86-VidModeExtension
[ 4.335] Initializing built-in extension XFree86-DGA
[ 4.335] Initializing built-in extension XFree86-DRI
[ 4.335] Initializing built-in extension DRI2
[ 4.335] (II) LoadModule: "glx"
[ 4.336] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.336] (II) Module glx: vendor="X.Org Foundation"
[ 4.336] compiled for 1.13.0, module version = 1.0.0
[ 4.336] ABI class: X.Org Server Extension, version 7.0
[ 4.336] (==) AIGLX enabled
[ 4.336] Loading extension GLX
[ 4.336] (==) Matched intel as autoconfigured driver 0
[ 4.336] (==) Matched intel as autoconfigured driver 1
[ 4.336] (==) Matched vesa as autoconfigured driver 2
[ 4.336] (==) Matched modesetting as autoconfigured driver 3
[ 4.336] (==) Matched fbdev as autoconfigured driver 4
[ 4.336] (==) Assigned the driver to the xf86ConfigLayout
[ 4.336] (II) LoadModule: "intel"
[ 4.338] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.338] (II) Module intel: vendor="X.Org Foundation"
[ 4.338] compiled for 1.13.0, module version = 2.20.9
[ 4.338] Module class: X.Org Video Driver
[ 4.338] ABI class: X.Org Video Driver, version 13.0
[ 4.338] (II) LoadModule: "vesa"
[ 4.338] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.338] (II) Module vesa: vendor="X.Org Foundation"
[ 4.338] compiled for 1.12.99.902, module version = 2.3.2
[ 4.338] Module class: X.Org Video Driver
[ 4.338] ABI class: X.Org Video Driver, version 13.0
[ 4.338] (II) LoadModule: "modesetting"
[ 4.338] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.339] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.339] compiled for 1.13.0, module version = 0.5.0
[ 4.339] Module class: X.Org Video Driver
[ 4.339] ABI class: X.Org Video Driver, version 13.0
[ 4.339] (II) LoadModule: "fbdev"
[ 4.339] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.339] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.339] compiled for 1.12.99.902, module version = 0.4.3
[ 4.339] Module class: X.Org Video Driver
[ 4.339] ABI class: X.Org Video Driver, version 13.0
[ 4.339] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 4.339] (II) VESA: driver for VESA chipsets: vesa
[ 4.339] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.339] (II) FBDEV: driver for framebuffer: fbdev
[ 4.339] (++) using VT number 7
[ 4.339] (II) intel(0): using device path '/dev/dri/card0'
[ 4.339] (WW) Falling back to old probe method for vesa
[ 4.339] (WW) Falling back to old probe method for modesetting
[ 4.339] (WW) Falling back to old probe method for fbdev
[ 4.339] (II) Loading sub module "fbdevhw"
[ 4.339] (II) LoadModule: "fbdevhw"
[ 4.339] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.339] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.339] compiled for 1.13.0, module version = 0.0.2
[ 4.339] ABI class: X.Org Video Driver, version 13.0
[ 4.339] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.339] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.339] (==) intel(0): RGB weight 888
[ 4.339] (==) intel(0): Default visual is TrueColor
[ 4.339] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT2)
[ 4.339] (**) intel(0): Relaxed fencing enabled
[ 4.339] (**) intel(0): Wait on SwapBuffers? enabled
[ 4.339] (**) intel(0): Triple buffering? enabled
[ 4.339] (**) intel(0): Framebuffer tiled
[ 4.339] (**) intel(0): Pixmaps tiled
[ 4.339] (**) intel(0): 3D buffers tiled
[ 4.339] (**) intel(0): SwapBuffers wait enabled
[ 4.339] (==) intel(0): video overlay key set to 0x101fe
[ 4.339] (II) intel(0): Output VGA1 has no monitor section
[ 4.352] (II) intel(0): Output HDMI1 has no monitor section
[ 4.928] (II) intel(0): Output HDMI2 has no monitor section
[ 4.976] (II) intel(0): Output DP1 has no monitor section
[ 5.024] (II) intel(0): Output DP2 has no monitor section
[ 5.024] (II) intel(0): EDID for output VGA1
[ 5.040] (II) intel(0): EDID for output HDMI1
[ 5.616] (II) intel(0): EDID for output HDMI2
[ 5.616] (II) intel(0): Manufacturer: IVM Model: 561c Serial#: 1934
[ 5.616] (II) intel(0): Year: 2011 Week: 47
[ 5.616] (II) intel(0): EDID Version: 1.3
[ 5.616] (II) intel(0): Digital Display Input
[ 5.616] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 5.616] (II) intel(0): Gamma: 2.20
[ 5.616] (II) intel(0): DPMS capabilities: Off
[ 5.616] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 5.616] (II) intel(0): First detailed timing is preferred mode
[ 5.616] (II) intel(0): redX: 0.634 redY: 0.333 greenX: 0.304 greenY: 0.627
[ 5.616] (II) intel(0): blueX: 0.150 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 5.616] (II) intel(0): Supported established timings:
[ 5.616] (II) intel(0): 720x400@70Hz
[ 5.616] (II) intel(0): 640x480@60Hz
[ 5.616] (II) intel(0): 640x480@67Hz
[ 5.616] (II) intel(0): 640x480@72Hz
[ 5.616] (II) intel(0): 640x480@75Hz
[ 5.616] (II) intel(0): 800x600@56Hz
[ 5.616] (II) intel(0): 800x600@60Hz
[ 5.616] (II) intel(0): 800x600@72Hz
[ 5.616] (II) intel(0): 800x600@75Hz
[ 5.616] (II) intel(0): 832x624@75Hz
[ 5.616] (II) intel(0): 1024x768@60Hz
[ 5.616] (II) intel(0): 1024x768@70Hz
[ 5.616] (II) intel(0): 1024x768@75Hz
[ 5.616] (II) intel(0): 1280x1024@75Hz
[ 5.616] (II) intel(0): Manufacturer's mask: 0
[ 5.616] (II) intel(0): Supported standard timings:
[ 5.616] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 5.616] (II) intel(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 5.616] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
[ 5.616] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
[ 5.616] (II) intel(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 5.616] (II) intel(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 5.616] (II) intel(0): #6: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 5.616] (II) intel(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 5.616] (II) intel(0): Supported detailed timing:
[ 5.616] (II) intel(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 5.616] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 5.616] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 5.616] (II) intel(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 185 MHz
[ 5.616] (II) intel(0): Serial No: 11118G1B01934
[ 5.616] (II) intel(0): Monitor name: PL2374HD
[ 5.616] (II) intel(0): Supported detailed timing:
[ 5.616] (II) intel(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 5.616] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 5.616] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 5.616] (II) intel(0): Supported detailed timing:
[ 5.616] (II) intel(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 5.616] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 5.616] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 5.616] (II) intel(0): Supported detailed timing:
[ 5.616] (II) intel(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 5.616] (II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 5.616] (II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 5.616] (II) intel(0): Number of EDID sections to follow: 1
[ 5.616] (II) intel(0): EDID (in hex):
[ 5.616] (II) intel(0): 00ffffffffffff0026cd1c568e070000
[ 5.616] (II) intel(0): 2f15010380331d782a5ea5a2554da026
[ 5.616] (II) intel(0): 115054bfef00d1c0b300818c818a8180
[ 5.616] (II) intel(0): 8140810081c0023a801871382d40582c
[ 5.616] (II) intel(0): 4500fd1e1100001e000000fd00374c1e
[ 5.616] (II) intel(0): 5312000a202020202020000000ff0031
[ 5.616] (II) intel(0): 313131384731423031393334000000fc
[ 5.616] (II) intel(0): 00504c3233373448440a202020200103
[ 5.616] (II) intel(0): 02031ff14c010203040510111213141e
[ 5.616] (II) intel(0): 1f230907018301000065030c0010008c
[ 5.616] (II) intel(0): 0ad08a20e02d10103e9600fd1e110000
[ 5.616] (II) intel(0): 18011d007251d01e206e285500fd1e11
[ 5.616] (II) intel(0): 00001e8c0ad090204031200c405500fd
[ 5.616] (II) intel(0): 1e110000180000000000000000000000
[ 5.616] (II) intel(0): 00000000000000000000000000000000
[ 5.616] (II) intel(0): 000000000000000000000000000000b8
[ 5.616] (II) intel(0): Printing probed modes for output HDMI2
[ 5.616] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 5.616] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 5.616] (II) intel(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 5.616] (II) intel(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 5.616] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 5.616] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 5.616] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 5.616] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 5.616] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 5.616] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 5.616] (II) intel(0): Modeline "1280x1024"x70.0 128.95 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz)
[ 5.616] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 5.616] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 5.616] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 5.616] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 5.616] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 5.616] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 5.616] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 5.616] (II) intel(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 5.616] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.616] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.616] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5.616] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 5.616] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 5.616] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.616] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.616] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.616] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.616] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 5.616] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 5.616] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 5.616] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.616] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.616] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 5.616] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.616] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.616] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.664] (II) intel(0): EDID for output DP1
[ 5.712] (II) intel(0): EDID for output DP2
[ 5.712] (II) intel(0): Output VGA1 disconnected
[ 5.712] (II) intel(0): Output HDMI1 disconnected
[ 5.712] (II) intel(0): Output HDMI2 connected
[ 5.712] (II) intel(0): Output DP1 disconnected
[ 5.712] (II) intel(0): Output DP2 disconnected
[ 5.712] (II) intel(0): Using exact sizes for initial modes
[ 5.712] (II) intel(0): Output HDMI2 using initial mode 1920x1080
[ 5.712] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.712] (II) intel(0): Kernel page flipping support detected, enabling
[ 5.712] (==) intel(0): DPI set to (96, 96)
[ 5.712] (II) Loading sub module "fb"
[ 5.712] (II) LoadModule: "fb"
[ 5.712] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.712] (II) Module fb: vendor="X.Org Foundation"
[ 5.712] compiled for 1.13.0, module version = 1.0.0
[ 5.712] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.712] (II) Loading sub module "dri2"
[ 5.712] (II) LoadModule: "dri2"
[ 5.712] (II) Module "dri2" already built-in
[ 5.712] (II) UnloadModule: "vesa"
[ 5.712] (II) Unloading vesa
[ 5.712] (II) UnloadModule: "modesetting"
[ 5.712] (II) Unloading modesetting
[ 5.712] (II) UnloadModule: "fbdev"
[ 5.712] (II) Unloading fbdev
[ 5.712] (II) UnloadSubModule: "fbdevhw"
[ 5.712] (II) Unloading fbdevhw
[ 5.712] (==) Depth 24 pixmap format is 32 bpp
[ 5.712] (II) intel(0): [DRI2] Setup complete
[ 5.712] (II) intel(0): [DRI2] DRI driver: i965
[ 5.712] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 5.712] (II) UXA(0): Driver registered support for the following operations:
[ 5.712] (II) solid
[ 5.712] (II) copy
[ 5.712] (II) composite (RENDER acceleration)
[ 5.712] (II) put_image
[ 5.712] (II) get_image
[ 5.712] (==) intel(0): Backing store disabled
[ 5.712] (==) intel(0): Silken mouse enabled
[ 5.712] (II) intel(0): Initializing HW Cursor
[ 5.712] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.712] (==) intel(0): DPMS enabled
[ 5.712] (==) intel(0): Intel XvMC decoder enabled
[ 5.712] (II) intel(0): Set up textured video
[ 5.712] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 5.712] (II) intel(0): direct rendering: DRI2 Enabled
[ 5.712] (==) intel(0): hotplug detection: "enabled"
[ 5.724] (--) RandR disabled
[ 5.728] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.728] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.728] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.728] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.728] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5.728] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.728] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.728] (II) AIGLX: Loaded and initialized i965
[ 5.728] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.728] (II) intel(0): Setting screen physical size to 508 x 285
[ 5.732] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 5.733] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.733] (II) LoadModule: "evdev"
[ 5.733] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.733] (II) Module evdev: vendor="X.Org Foundation"
[ 5.733] compiled for 1.13.0, module version = 2.7.3
[ 5.733] Module class: X.Org XInput Driver
[ 5.733] ABI class: X.Org XInput driver, version 18.0
[ 5.733] (II) Using input driver 'evdev' for 'Power Button'
[ 5.733] (**) Power Button: always reports core events
[ 5.733] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.733] (--) evdev: Power Button: Found keys
[ 5.733] (II) evdev: Power Button: Configuring as keyboard
[ 5.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.733] (**) Option "xkb_rules" "evdev"
[ 5.733] (**) Option "xkb_model" "pc105"
[ 5.733] (**) Option "xkb_layout" "fr"
[ 5.733] (**) Option "xkb_variant" "latin9"
[ 5.734] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 5.735] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 5.735] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.735] (II) Using input driver 'evdev' for 'Video Bus'
[ 5.735] (**) Video Bus: always reports core events
[ 5.735] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 5.735] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 5.735] (--) evdev: Video Bus: Found keys
[ 5.735] (II) evdev: Video Bus: Configuring as keyboard
[ 5.735] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 5.735] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.735] (**) Option "xkb_rules" "evdev"
[ 5.735] (**) Option "xkb_model" "pc105"
[ 5.735] (**) Option "xkb_layout" "fr"
[ 5.735] (**) Option "xkb_variant" "latin9"
[ 5.735] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.735] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.735] (II) Using input driver 'evdev' for 'Power Button'
[ 5.735] (**) Power Button: always reports core events
[ 5.735] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.735] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.735] (--) evdev: Power Button: Found keys
[ 5.735] (II) evdev: Power Button: Configuring as keyboard
[ 5.735] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 5.735] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5.735] (**) Option "xkb_rules" "evdev"
[ 5.735] (**) Option "xkb_model" "pc105"
[ 5.735] (**) Option "xkb_layout" "fr"
[ 5.735] (**) Option "xkb_variant" "latin9"
[ 5.735] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.735] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 5.735] (II) No input driver specified, ignoring this device.
[ 5.735] (II) This device may have been added with another device file.
[ 5.735] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[ 5.735] (II) No input driver specified, ignoring this device.
[ 5.735] (II) This device may have been added with another device file.
[ 5.735] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 5.735] (II) No input driver specified, ignoring this device.
[ 5.735] (II) This device may have been added with another device file.
[ 5.736] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 5.736] (II) No input driver specified, ignoring this device.
[ 5.736] (II) This device may have been added with another device file.
[ 5.736] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 5.736] (II) No input driver specified, ignoring this device.
[ 5.736] (II) This device may have been added with another device file.
[ 5.736] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 5.736] (II) No input driver specified, ignoring this device.
[ 5.736] (II) This device may have been added with another device file.
[ 5.736] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/event2)
[ 5.736] (**) Logitech Unifying Device. Wireless PID:101a: Applying InputClass "evdev pointer catchall"
[ 5.736] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101a'
[ 5.736] (**) Logitech Unifying Device. Wireless PID:101a: always reports core events
[ 5.736] (**) evdev: Logitech Unifying Device. Wireless PID:101a: Device: "/dev/input/event2"
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Vendor 0x46d Product 0xc52b
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found 20 mouse buttons
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found scroll wheel(s)
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found relative axes
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found x and y relative axes
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Configuring as mouse
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Adding scrollwheel support
[ 5.736] (**) evdev: Logitech Unifying Device. Wireless PID:101a: YAxisMapping: buttons 4 and 5
[ 5.736] (**) evdev: Logitech Unifying Device. Wireless PID:101a: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0003/input/input2/event2"
[ 5.736] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101a" (type: MOUSE, id 9)
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:101a: initialized for relative axes.
[ 5.736] (**) Logitech Unifying Device. Wireless PID:101a: (accel) keeping acceleration scheme 1
[ 5.736] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration profile 0
[ 5.736] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration factor: 2.000
[ 5.736] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration threshold: 4
[ 5.736] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/mouse0)
[ 5.736] (II) No input driver specified, ignoring this device.
[ 5.736] (II) This device may have been added with another device file.
[ 5.736] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400d (/dev/input/event3)
[ 5.736] (**) Logitech Unifying Device. Wireless PID:400d: Applying InputClass "evdev keyboard catchall"
[ 5.736] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:400d'
[ 5.736] (**) Logitech Unifying Device. Wireless PID:400d: always reports core events
[ 5.736] (**) evdev: Logitech Unifying Device. Wireless PID:400d: Device: "/dev/input/event3"
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:400d: Vendor 0x46d Product 0xc52b
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:400d: Found 1 mouse buttons
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:400d: Found scroll wheel(s)
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:400d: Found relative axes
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:400d: Forcing relative x/y axes to exist.
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:400d: Found absolute axes
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:400d: Forcing absolute x/y axes to exist.
[ 5.736] (--) evdev: Logitech Unifying Device. Wireless PID:400d: Found keys
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:400d: Configuring as mouse
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:400d: Configuring as keyboard
[ 5.736] (II) evdev: Logitech Unifying Device. Wireless PID:400d: Adding scrollwheel support
[ 5.736] (**) evdev: Logitech Unifying Device. Wireless PID:400d: YAxisMapping: buttons 4 and 5
[ 5.736] (**) evdev: Logitech Unifying Device. Wireless PID:400d: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0003/input/input3/event3"
[ 5.736] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:400d" (type: KEYBOARD, id 10)
[ 5.736] (**) Option "xkb_rules" "evdev"
[ 5.736] (**) Option "xkb_model" "pc105"
[ 5.736] (**) Option "xkb_layout" "fr"
[ 5.736] (**) Option "xkb_variant" "latin9"
[ 5.737] (II) evdev: Logitech Unifying Device. Wireless PID:400d: initialized for relative axes.
[ 5.737] (WW) evdev: Logitech Unifying Device. Wireless PID:400d: ignoring absolute axes.
[ 5.737] (**) Logitech Unifying Device. Wireless PID:400d: (accel) keeping acceleration scheme 1
[ 5.737] (**) Logitech Unifying Device. Wireless PID:400d: (accel) acceleration profile 0
[ 5.737] (**) Logitech Unifying Device. Wireless PID:400d: (accel) acceleration factor: 2.000
[ 5.737] (**) Logitech Unifying Device. Wireless PID:400d: (accel) acceleration threshold: 4
[ 5.737] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 5.737] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 5.737] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 5.737] (**) Eee PC WMI hotkeys: always reports core events
[ 5.737] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event4"
[ 5.737] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 5.737] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 5.737] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 5.737] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[ 5.737] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 5.737] (**) Option "xkb_rules" "evdev"
[ 5.737] (**) Option "xkb_model" "pc105"
[ 5.737] (**) Option "xkb_layout" "fr"
[ 5.737] (**) Option "xkb_variant" "latin9"
[ 5.740] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[ 5.740] (II) No input driver specified, ignoring this device.
[ 5.740] (II) This device may have been added with another device file.
[ 5.740] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 5.740] (II) No input driver specified, ignoring this device.
[ 5.740] (II) This device may have been added with another device file.
[ 5.740] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 5.740] (II) No input driver specified, ignoring this device.
[ 5.740] (II) This device may have been added with another device file.
[ 5.740] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 5.740] (II) No input driver specified, ignoring this device.
[ 5.740] (II) This device may have been added with another device file.
[ 5.740] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 5.740] (II) No input driver specified, ignoring this device.
[ 5.740] (II) This device may have been added with another device file.
[ 5.740] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 5.740] (II) No input driver specified, ignoring this device.
[ 5.740] (II) This device may have been added with another device file.
[ 6.460] (II) intel(0): EDID vendor "IVM", prod id 22044
[ 6.460] (II) intel(0): Using EDID range info for horizontal sync
[ 6.460] (II) intel(0): Using EDID range info for vertical refresh
[ 6.460] (II) intel(0): Printing DDC gathered Modelines:
[ 6.460] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.460] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.460] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.460] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.460] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.460] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.460] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 6.460] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.460] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.460] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.460] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.460] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.460] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.460] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.460] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.460] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.460] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.460] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 6.460] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 6.460] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 6.460] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.460] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 6.460] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 6.460] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.460] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 7.576] (II) intel(0): EDID vendor "IVM", prod id 22044
[ 7.576] (II) intel(0): Using hsync ranges from config file
[ 7.576] (II) intel(0): Using vrefresh ranges from config file
[ 7.576] (II) intel(0): Printing DDC gathered Modelines:
[ 7.576] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.576] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.576] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 7.576] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.576] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.576] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7.576] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 7.576] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 7.576] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.576] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7.576] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 7.576] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 7.576] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.576] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7.576] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7.576] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 7.576] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 7.576] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 7.576] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 7.576] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 7.576] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 7.576] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 7.576] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 7.576] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 7.576] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 10.928] (II) intel(0): EDID vendor "IVM", prod id 22044
[ 10.928] (II) intel(0): Using hsync ranges from config file
[ 10.928] (II) intel(0): Using vrefresh ranges from config file
[ 10.928] (II) intel(0): Printing DDC gathered Modelines:
[ 10.928] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 10.928] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 10.928] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 10.928] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.928] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.928] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.928] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.928] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.928] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.928] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.928] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.928] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.928] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.928] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.928] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.928] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.928] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 10.928] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 10.928] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 10.928] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 10.928] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 10.928] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 10.928] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 10.928] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 10.928] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 11.688] (II) intel(0): EDID vendor "IVM", prod id 22044
[ 11.688] (II) intel(0): Using hsync ranges from config file
[ 11.688] (II) intel(0): Using vrefresh ranges from config file
[ 11.688] (II) intel(0): Printing DDC gathered Modelines:
[ 11.688] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 11.688] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.688] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 11.688] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.688] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11.688] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.688] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11.688] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11.688] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.688] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.688] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11.688] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11.688] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.688] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11.688] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.688] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11.688] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 11.688] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 11.688] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 11.688] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 11.688] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 11.688] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 11.688] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 11.688] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 11.688] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 12.452] (II) intel(0): EDID vendor "IVM", prod id 22044
[ 12.452] (II) intel(0): Using hsync ranges from config file
[ 12.452] (II) intel(0): Using vrefresh ranges from config file
[ 12.452] (II) intel(0): Printing DDC gathered Modelines:
[ 12.452] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 12.452] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 12.452] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 12.452] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.452] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12.452] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.452] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 12.452] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 12.452] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.452] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.452] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12.452] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 12.452] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.452] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 12.452] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.452] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 12.452] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 12.452] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 12.452] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 12.452] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 12.452] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 12.452] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 12.452] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 12.452] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 12.452] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 13.188] (II) intel(0): EDID vendor "IVM", prod id 22044
[ 13.188] (II) intel(0): Using hsync ranges from config file
[ 13.188] (II) intel(0): Using vrefresh ranges from config file
[ 13.188] (II) intel(0): Printing DDC gathered Modelines:
[ 13.188] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 13.188] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 13.188] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 13.188] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13.188] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 13.188] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 13.188] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 13.188] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 13.188] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.188] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.188] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 13.188] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 13.188] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13.188] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 13.188] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 13.188] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 13.188] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 13.188] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 13.188] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 13.188] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 13.188] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 13.188] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 13.188] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 13.188] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 13.188] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 13.977] (II) XKB: reuse xkmfile /var/lib/xkb/server-C814AC61323ADD9F3C69F18721C056518480B483.xkmJ'oubliais : je suis sous ubuntu 12.10, mais j'avais aussi essayé d'installer la 12.04 et même problème.
Merci pour ton temps !
Dernière modification par Arkandias (Le 25/10/2012, à 12:45)
Hors ligne
#8 Le 25/10/2012, à 18:34
- F50
Re : Clavier et souris logitech sans fil extrêmement lents !
Tape ceci dans un terminal: sudo apt-get remove xserver-xorg-input-mouse car c'est un pilote pour souris mais obsolète, peut-être y a-t-il un conflit..? Puis reboot et poste le contenu de /var/log/syslog. Mais il y a pas mal de Xorg.0.log!:
No input driver specified, ignoring this device.
Il doit manquer qq chose dans l'install..!
#9 Le 26/10/2012, à 16:44
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
J'ai désinstallé le driver.
Voici le syslog :
Oct 26 16:37:25 JYH kernel: [ 0.327183] pnp 00:09: >[io 0x0080]
Oct 26 16:37:25 JYH kernel: [ 0.327184] pnp 00:09: >[io 0x0084-0x0086]
Oct 26 16:37:25 JYH kernel: [ 0.327185] pnp 00:09: >[io 0x0088]
Oct 26 16:37:25 JYH kernel: [ 0.327185] pnp 00:09: >[io 0x008c-0x008e]
Oct 26 16:37:25 JYH kernel: [ 0.327186] pnp 00:09: >[io 0x0090-0x009f]
Oct 26 16:37:25 JYH kernel: [ 0.327187] pnp 00:09: >[io 0x00a2-0x00bf]
Oct 26 16:37:25 JYH kernel: [ 0.327188] pnp 00:09: >[io 0x00e0-0x00ef]
Oct 26 16:37:25 JYH kernel: [ 0.327189] pnp 00:09: >[io 0x04d0-0x04d1]
Oct 26 16:37:25 JYH kernel: [ 0.327210] system 00:09: >[io 0x04d0-0x04d1] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327211] system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 26 16:37:25 JYH kernel: [ 0.327216] pnp 00:0a: >[io 0x00f0-0x00ff]
Oct 26 16:37:25 JYH kernel: [ 0.327220] pnp 00:0a: >[irq 13]
Oct 26 16:37:25 JYH kernel: [ 0.327230] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0c04 (active)
Oct 26 16:37:25 JYH kernel: [ 0.327359] pnp 00:0b: >[mem 0xfed1c000-0xfed1ffff]
Oct 26 16:37:25 JYH kernel: [ 0.327361] pnp 00:0b: >[mem 0xfed10000-0xfed17fff]
Oct 26 16:37:25 JYH kernel: [ 0.327362] pnp 00:0b: >[mem 0xfed18000-0xfed18fff]
Oct 26 16:37:25 JYH kernel: [ 0.327362] pnp 00:0b: >[mem 0xfed19000-0xfed19fff]
Oct 26 16:37:25 JYH kernel: [ 0.327363] pnp 00:0b: >[mem 0xf8000000-0xfbffffff]
Oct 26 16:37:25 JYH kernel: [ 0.327364] pnp 00:0b: >[mem 0xfed20000-0xfed3ffff]
Oct 26 16:37:25 JYH kernel: [ 0.327365] pnp 00:0b: >[mem 0xfed90000-0xfed93fff]
Oct 26 16:37:25 JYH kernel: [ 0.327366] pnp 00:0b: >[mem 0xfed45000-0xfed8ffff]
Oct 26 16:37:25 JYH kernel: [ 0.327367] pnp 00:0b: >[mem 0xff000000-0xffffffff]
Oct 26 16:37:25 JYH kernel: [ 0.327368] pnp 00:0b: >[mem 0xfee00000-0xfeefffff]
Oct 26 16:37:25 JYH kernel: [ 0.327369] pnp 00:0b: >[mem 0xdf200000-0xdf200fff]
Oct 26 16:37:25 JYH kernel: [ 0.327397] system 00:0b: >[mem 0xfed1c000-0xfed1ffff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327398] system 00:0b: >[mem 0xfed10000-0xfed17fff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327399] system 00:0b: >[mem 0xfed18000-0xfed18fff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327400] system 00:0b: >[mem 0xfed19000-0xfed19fff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327401] system 00:0b: >[mem 0xf8000000-0xfbffffff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327402] system 00:0b: >[mem 0xfed20000-0xfed3ffff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327404] system 00:0b: >[mem 0xfed90000-0xfed93fff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327405] system 00:0b: >[mem 0xfed45000-0xfed8ffff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327406] system 00:0b: >[mem 0xff000000-0xffffffff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327407] system 00:0b: >[mem 0xfee00000-0xfeefffff] could not be reserved
Oct 26 16:37:25 JYH kernel: [ 0.327408] system 00:0b: >[mem 0xdf200000-0xdf200fff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327410] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 26 16:37:25 JYH kernel: [ 0.327485] pnp 00:0c: >[mem 0x20000000-0x201fffff]
Oct 26 16:37:25 JYH kernel: [ 0.327486] pnp 00:0c: >[mem 0x40004000-0x40004fff]
Oct 26 16:37:25 JYH kernel: [ 0.327512] system 00:0c: >[mem 0x20000000-0x201fffff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327513] system 00:0c: >[mem 0x40004000-0x40004fff] has been reserved
Oct 26 16:37:25 JYH kernel: [ 0.327515] system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 26 16:37:25 JYH kernel: [ 0.327528] pnp: PnP ACPI: found 13 devices
Oct 26 16:37:25 JYH kernel: [ 0.327529] ACPI: ACPI bus type pnp unregistered
Oct 26 16:37:25 JYH kernel: [ 0.333082] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
Oct 26 16:37:25 JYH kernel: [ 0.333087] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
Oct 26 16:37:25 JYH kernel: [ 0.333103] pci 0000:00:1c.4: >PCI bridge to [bus 03-03]
Oct 26 16:37:25 JYH kernel: [ 0.333105] pci 0000:00:1c.4: > bridge window [io 0xe000-0xefff]
Oct 26 16:37:25 JYH kernel: [ 0.333111] pci 0000:00:1c.4: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Oct 26 16:37:25 JYH kernel: [ 0.333133] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
Oct 26 16:37:25 JYH kernel: [ 0.333134] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
Oct 26 16:37:25 JYH kernel: [ 0.333135] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
Oct 26 16:37:25 JYH kernel: [ 0.333136] pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000d3fff]
Oct 26 16:37:25 JYH kernel: [ 0.333137] pci_bus 0000:00: >resource 8 [mem 0x000d4000-0x000d7fff]
Oct 26 16:37:25 JYH kernel: [ 0.333138] pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000dbfff]
Oct 26 16:37:25 JYH kernel: [ 0.333139] pci_bus 0000:00: >resource 10 [mem 0x000dc000-0x000dffff]
Oct 26 16:37:25 JYH kernel: [ 0.333140] pci_bus 0000:00: >resource 11 [mem 0x000e0000-0x000e3fff]
Oct 26 16:37:25 JYH kernel: [ 0.333141] pci_bus 0000:00: >resource 12 [mem 0x000e4000-0x000e7fff]
Oct 26 16:37:25 JYH kernel: [ 0.333142] pci_bus 0000:00: >resource 13 [mem 0xdf200000-0xfeafffff]
Oct 26 16:37:25 JYH kernel: [ 0.333143] pci_bus 0000:03: >resource 0 [io 0xe000-0xefff]
Oct 26 16:37:25 JYH kernel: [ 0.333144] pci_bus 0000:03: >resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
Oct 26 16:37:25 JYH kernel: [ 0.333164] NET: Registered protocol family 2
Oct 26 16:37:25 JYH kernel: [ 0.333271] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 26 16:37:25 JYH kernel: [ 0.333709] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Oct 26 16:37:25 JYH kernel: [ 0.334799] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 26 16:37:25 JYH kernel: [ 0.334939] TCP: Hash tables configured (established 524288 bind 65536)
Oct 26 16:37:25 JYH kernel: [ 0.334941] TCP: reno registered
Oct 26 16:37:25 JYH kernel: [ 0.334949] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Oct 26 16:37:25 JYH kernel: [ 0.334973] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Oct 26 16:37:25 JYH kernel: [ 0.335031] NET: Registered protocol family 1
Oct 26 16:37:25 JYH kernel: [ 0.335056] pci 0000:00:02.0: >Boot video device
Oct 26 16:37:25 JYH kernel: [ 0.373246] Freeing initrd memory: 14876k freed
Oct 26 16:37:25 JYH kernel: [ 0.375063] PCI: CLS 64 bytes, default 64
Oct 26 16:37:25 JYH kernel: [ 0.375076] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 26 16:37:25 JYH kernel: [ 0.375077] software IO TLB [mem 0xc8fea000-0xccfe9fff] (64MB) mapped at [ffff8800c8fea000-ffff8800ccfe9fff]
Oct 26 16:37:25 JYH kernel: [ 0.375387] audit: initializing netlink socket (disabled)
Oct 26 16:37:25 JYH kernel: [ 0.375395] type=2000 audit(1351262241.268:1): initialized
Oct 26 16:37:25 JYH kernel: [ 0.390258] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 26 16:37:25 JYH kernel: [ 0.391284] VFS: Disk quotas dquot_6.5.2
Oct 26 16:37:25 JYH kernel: [ 0.391303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 26 16:37:25 JYH kernel: [ 0.391546] fuse init (API version 7.19)
Oct 26 16:37:25 JYH kernel: [ 0.391586] msgmni has been set to 15366
Oct 26 16:37:25 JYH kernel: [ 0.391778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Oct 26 16:37:25 JYH kernel: [ 0.391794] io scheduler noop registered
Oct 26 16:37:25 JYH kernel: [ 0.391795] io scheduler deadline registered (default)
Oct 26 16:37:25 JYH kernel: [ 0.391810] io scheduler cfq registered
Oct 26 16:37:25 JYH kernel: [ 0.391869] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
Oct 26 16:37:25 JYH kernel: [ 0.392004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 26 16:37:25 JYH kernel: [ 0.392013] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 26 16:37:25 JYH kernel: [ 0.392035] intel_idle: MWAIT substates: 0x1120
Oct 26 16:37:25 JYH kernel: [ 0.392036] intel_idle: v0.4 model 0x3A
Oct 26 16:37:25 JYH kernel: [ 0.392037] intel_idle: lapic_timer_reliable_states 0xffffffff
Oct 26 16:37:25 JYH kernel: [ 0.392095] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Oct 26 16:37:25 JYH kernel: [ 0.392099] ACPI: Power Button [PWRB]
Oct 26 16:37:25 JYH kernel: [ 0.392121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Oct 26 16:37:25 JYH kernel: [ 0.392122] ACPI: Power Button [PWRF]
Oct 26 16:37:25 JYH kernel: [ 0.392169] ACPI: Fan [FAN0] (off)
Oct 26 16:37:25 JYH kernel: [ 0.392185] ACPI: Fan [FAN1] (off)
Oct 26 16:37:25 JYH kernel: [ 0.392199] ACPI: Fan [FAN2] (off)
Oct 26 16:37:25 JYH kernel: [ 0.392212] ACPI: Fan [FAN3] (off)
Oct 26 16:37:25 JYH kernel: [ 0.392226] ACPI: Fan [FAN4] (off)
Oct 26 16:37:25 JYH kernel: [ 0.392262] ACPI: Requesting acpi_cpufreq
Oct 26 16:37:25 JYH kernel: [ 0.394645] thermal LNXTHERM:00: >registered as thermal_zone0
Oct 26 16:37:25 JYH kernel: [ 0.394647] ACPI: Thermal Zone [TZ00] (28 C)
Oct 26 16:37:25 JYH kernel: [ 0.394741] thermal LNXTHERM:01: >registered as thermal_zone1
Oct 26 16:37:25 JYH kernel: [ 0.394742] ACPI: Thermal Zone [TZ01] (30 C)
Oct 26 16:37:25 JYH kernel: [ 0.394763] GHES: HEST is not enabled!
Oct 26 16:37:25 JYH kernel: [ 0.394797] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Oct 26 16:37:25 JYH kernel: [ 0.395474] Linux agpgart interface v0.103
Oct 26 16:37:25 JYH kernel: [ 0.396064] brd: module loaded
Oct 26 16:37:25 JYH kernel: [ 0.396409] loop: module loaded
Oct 26 16:37:25 JYH kernel: [ 0.396469] ata_piix 0000:00:1f.2: >version 2.13
Oct 26 16:37:25 JYH kernel: [ 0.396482] ata_piix 0000:00:1f.2: >MAP [
Oct 26 16:37:25 JYH kernel: [ 0.396482] P0 P2 P1 P3 ]
Oct 26 16:37:25 JYH kernel: [ 0.550935] ata_piix 0000:00:1f.2: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 0.551076] scsi0 : ata_piix
Oct 26 16:37:25 JYH kernel: [ 0.551112] scsi1 : ata_piix
Oct 26 16:37:25 JYH kernel: [ 0.551193] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
Oct 26 16:37:25 JYH kernel: [ 0.551196] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
Oct 26 16:37:25 JYH kernel: [ 0.551210] ata_piix 0000:00:1f.5: >MAP [
Oct 26 16:37:25 JYH kernel: [ 0.551210] P0 -- P1 -- ]
Oct 26 16:37:25 JYH kernel: [ 0.706835] ata_piix 0000:00:1f.5: >SCR access via SIDPR is available but doesn't work
Oct 26 16:37:25 JYH kernel: [ 0.706843] ata_piix 0000:00:1f.5: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 0.706946] scsi2 : ata_piix
Oct 26 16:37:25 JYH kernel: [ 0.706976] scsi3 : ata_piix
Oct 26 16:37:25 JYH kernel: [ 0.707031] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
Oct 26 16:37:25 JYH kernel: [ 0.707032] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
Oct 26 16:37:25 JYH kernel: [ 0.707158] Fixed MDIO Bus: probed
Oct 26 16:37:25 JYH kernel: [ 0.707180] tun: Universal TUN/TAP device driver, 1.6
Oct 26 16:37:25 JYH kernel: [ 0.707180] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 26 16:37:25 JYH kernel: [ 0.707203] PPP generic driver version 2.4.2
Oct 26 16:37:25 JYH kernel: [ 0.707225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 26 16:37:25 JYH kernel: [ 0.707251] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 0.707253] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.707256] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
Oct 26 16:37:25 JYH kernel: [ 0.707274] ehci_hcd 0000:00:1a.0: >debug port 2
Oct 26 16:37:25 JYH kernel: [ 0.711160] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
Oct 26 16:37:25 JYH kernel: [ 0.711169] ehci_hcd 0000:00:1a.0: >irq 23, io mem 0xf7c17000
Oct 26 16:37:25 JYH kernel: [ 0.722819] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
Oct 26 16:37:25 JYH kernel: [ 0.722841] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
Oct 26 16:37:25 JYH kernel: [ 0.722844] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 26 16:37:25 JYH kernel: [ 0.722846] usb usb1: >Product: EHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.722848] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
Oct 26 16:37:25 JYH kernel: [ 0.722850] usb usb1: >SerialNumber: 0000:00:1a.0
Oct 26 16:37:25 JYH kernel: [ 0.722921] hub 1-0:1.0: >USB hub found
Oct 26 16:37:25 JYH kernel: [ 0.722924] hub 1-0:1.0: >2 ports detected
Oct 26 16:37:25 JYH kernel: [ 0.722961] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 0.722963] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.722965] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
Oct 26 16:37:25 JYH kernel: [ 0.722980] ehci_hcd 0000:00:1d.0: >debug port 2
Oct 26 16:37:25 JYH kernel: [ 0.726868] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
Oct 26 16:37:25 JYH kernel: [ 0.726870] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf7c16000
Oct 26 16:37:25 JYH kernel: [ 0.738813] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
Oct 26 16:37:25 JYH kernel: [ 0.738827] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
Oct 26 16:37:25 JYH kernel: [ 0.738829] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 26 16:37:25 JYH kernel: [ 0.738831] usb usb2: >Product: EHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.738833] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
Oct 26 16:37:25 JYH kernel: [ 0.738835] usb usb2: >SerialNumber: 0000:00:1d.0
Oct 26 16:37:25 JYH kernel: [ 0.738903] hub 2-0:1.0: >USB hub found
Oct 26 16:37:25 JYH kernel: [ 0.738904] hub 2-0:1.0: >2 ports detected
Oct 26 16:37:25 JYH kernel: [ 0.738930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 26 16:37:25 JYH kernel: [ 0.738937] uhci_hcd: USB Universal Host Controller Interface driver
Oct 26 16:37:25 JYH kernel: [ 0.738963] xhci_hcd 0000:00:14.0: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 0.738965] xhci_hcd 0000:00:14.0: >xHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.738968] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
Oct 26 16:37:25 JYH kernel: [ 0.739038] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
Oct 26 16:37:25 JYH kernel: [ 0.739048] xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf7c00000
Oct 26 16:37:25 JYH kernel: [ 0.739084] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
Oct 26 16:37:25 JYH kernel: [ 0.739118] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
Oct 26 16:37:25 JYH kernel: [ 0.739119] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 26 16:37:25 JYH kernel: [ 0.739120] usb usb3: >Product: xHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.739121] usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
Oct 26 16:37:25 JYH kernel: [ 0.739122] usb usb3: >SerialNumber: 0000:00:14.0
Oct 26 16:37:25 JYH kernel: [ 0.739160] xHCI xhci_add_endpoint called for root hub
Oct 26 16:37:25 JYH kernel: [ 0.739161] xHCI xhci_check_bandwidth called for root hub
Oct 26 16:37:25 JYH kernel: [ 0.739172] hub 3-0:1.0: >USB hub found
Oct 26 16:37:25 JYH kernel: [ 0.739177] hub 3-0:1.0: >4 ports detected
Oct 26 16:37:25 JYH kernel: [ 0.739208] xhci_hcd 0000:00:14.0: >xHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.739210] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
Oct 26 16:37:25 JYH kernel: [ 0.739223] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
Oct 26 16:37:25 JYH kernel: [ 0.739224] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 26 16:37:25 JYH kernel: [ 0.739225] usb usb4: >Product: xHCI Host Controller
Oct 26 16:37:25 JYH kernel: [ 0.739226] usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
Oct 26 16:37:25 JYH kernel: [ 0.739227] usb usb4: >SerialNumber: 0000:00:14.0
Oct 26 16:37:25 JYH kernel: [ 0.739261] xHCI xhci_add_endpoint called for root hub
Oct 26 16:37:25 JYH kernel: [ 0.739262] xHCI xhci_check_bandwidth called for root hub
Oct 26 16:37:25 JYH kernel: [ 0.739271] hub 4-0:1.0: >USB hub found
Oct 26 16:37:25 JYH kernel: [ 0.739276] hub 4-0:1.0: >4 ports detected
Oct 26 16:37:25 JYH kernel: [ 0.739343] usbcore: registered new interface driver libusual
Oct 26 16:37:25 JYH kernel: [ 0.739362] i8042: PNP: No PS/2 controller found. Probing ports directly.
Oct 26 16:37:25 JYH kernel: [ 0.739720] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 26 16:37:25 JYH kernel: [ 0.739723] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 26 16:37:25 JYH kernel: [ 0.739775] mousedev: PS/2 mouse device common for all mice
Oct 26 16:37:25 JYH kernel: [ 0.739840] rtc_cmos 00:06: >RTC can wake from S4
Oct 26 16:37:25 JYH kernel: [ 0.739933] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
Oct 26 16:37:25 JYH kernel: [ 0.739956] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Oct 26 16:37:25 JYH kernel: [ 0.739989] device-mapper: uevent: version 1.0.3
Oct 26 16:37:25 JYH kernel: [ 0.740020] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
Oct 26 16:37:25 JYH kernel: [ 0.740056] cpuidle: using governor ladder
Oct 26 16:37:25 JYH kernel: [ 0.740098] cpuidle: using governor menu
Oct 26 16:37:25 JYH kernel: [ 0.740099] EFI Variables Facility v0.08 2004-May-17
Oct 26 16:37:25 JYH kernel: [ 0.740247] ashmem: initialized
Oct 26 16:37:25 JYH kernel: [ 0.740316] TCP: cubic registered
Oct 26 16:37:25 JYH kernel: [ 0.740369] NET: Registered protocol family 10
Oct 26 16:37:25 JYH kernel: [ 0.740475] NET: Registered protocol family 17
Oct 26 16:37:25 JYH kernel: [ 0.740483] Key type dns_resolver registered
Oct 26 16:37:25 JYH kernel: [ 0.740609] PM: Hibernation image not present or could not be loaded.
Oct 26 16:37:25 JYH kernel: [ 0.740614] registered taskstats version 1
Oct 26 16:37:25 JYH kernel: [ 0.742444] Key type trusted registered
Oct 26 16:37:25 JYH kernel: [ 0.743952] Key type encrypted registered
Oct 26 16:37:25 JYH kernel: [ 0.745575] Magic number: 0:46:638
Oct 26 16:37:25 JYH kernel: [ 0.745662] rtc_cmos 00:06: >setting system clock to 2012-10-26 14:37:22 UTC (1351262242)
Oct 26 16:37:25 JYH kernel: [ 0.746094] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 26 16:37:25 JYH kernel: [ 0.746094] EDD information not available.
Oct 26 16:37:25 JYH kernel: [ 1.034658] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
Oct 26 16:37:25 JYH kernel: [ 1.166981] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
Oct 26 16:37:25 JYH kernel: [ 1.166985] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 26 16:37:25 JYH kernel: [ 1.167279] hub 1-1:1.0: >USB hub found
Oct 26 16:37:25 JYH kernel: [ 1.167350] hub 1-1:1.0: >6 ports detected
Oct 26 16:37:25 JYH kernel: [ 1.278524] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
Oct 26 16:37:25 JYH kernel: [ 1.374454] Refined TSC clocksource calibration: 3400.023 MHz.
Oct 26 16:37:25 JYH kernel: [ 1.374460] Switching to clocksource tsc
Oct 26 16:37:25 JYH kernel: [ 1.410836] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
Oct 26 16:37:25 JYH kernel: [ 1.410840] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 26 16:37:25 JYH kernel: [ 1.411126] hub 2-1:1.0: >USB hub found
Oct 26 16:37:25 JYH kernel: [ 1.411203] hub 2-1:1.0: >8 ports detected
Oct 26 16:37:25 JYH kernel: [ 1.578336] ata2.00: failed to resume link (SControl 30)
Oct 26 16:37:25 JYH kernel: [ 1.682427] usb 2-1.6: >new full-speed USB device number 3 using ehci_hcd
Oct 26 16:37:25 JYH kernel: [ 1.777372] usb 2-1.6: >New USB device found, idVendor=046d, idProduct=c52b
Oct 26 16:37:25 JYH kernel: [ 1.777376] usb 2-1.6: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
Oct 26 16:37:25 JYH kernel: [ 1.777379] usb 2-1.6: >Product: USB Receiver
Oct 26 16:37:25 JYH kernel: [ 1.777381] usb 2-1.6: >Manufacturer: Logitech
Oct 26 16:37:25 JYH kernel: [ 1.898168] ata1.01: failed to resume link (SControl 0)
Oct 26 16:37:25 JYH kernel: [ 2.054114] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
Oct 26 16:37:25 JYH kernel: [ 2.054124] ata1.01: SATA link down (SStatus 0 SControl 0)
Oct 26 16:37:25 JYH kernel: [ 2.062379] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HA, max UDMA/133
Oct 26 16:37:25 JYH kernel: [ 2.062380] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 26 16:37:25 JYH kernel: [ 2.070379] ata1.00: configured for UDMA/133
Oct 26 16:37:25 JYH kernel: [ 2.070556] scsi 0:0:0:0: >Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
Oct 26 16:37:25 JYH kernel: [ 2.070710] sd 0:0:0:0: >[sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Oct 26 16:37:25 JYH kernel: [ 2.070711] sd 0:0:0:0: >Attached scsi generic sg0 type 0
Oct 26 16:37:25 JYH kernel: [ 2.070957] sd 0:0:0:0: >[sda] Write Protect is off
Oct 26 16:37:25 JYH kernel: [ 2.070959] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
Oct 26 16:37:25 JYH kernel: [ 2.071022] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 26 16:37:25 JYH kernel: [ 2.071826] sda: sda1
Oct 26 16:37:25 JYH kernel: [ 2.072286] sd 0:0:0:0: >[sda] Attached SCSI disk
Oct 26 16:37:25 JYH kernel: [ 2.605731] ata2.01: failed to resume link (SControl 0)
Oct 26 16:37:25 JYH kernel: [ 2.616356] ata2.00: SATA link down (SStatus 4 SControl 30)
Oct 26 16:37:25 JYH kernel: [ 2.616367] ata2.01: SATA link down (SStatus 0 SControl 0)
Oct 26 16:37:25 JYH kernel: [ 2.617292] Freeing unused kernel memory: 928k freed
Oct 26 16:37:25 JYH kernel: [ 2.617372] Write protecting the kernel read-only data: 12288k
Oct 26 16:37:25 JYH kernel: [ 2.619799] Freeing unused kernel memory: 1472k freed
Oct 26 16:37:25 JYH kernel: [ 2.621729] Freeing unused kernel memory: 1124k freed
Oct 26 16:37:25 JYH kernel: [ 2.642770] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 26 16:37:25 JYH kernel: [ 2.642908] r8169 0000:03:00.0: >irq 42 for MSI/MSI-X
Oct 26 16:37:25 JYH kernel: [ 2.643185] r8169 0000:03:00.0: >eth0: RTL8168f/8111f at 0xffffc90000c72000, 30:85:a9:40:0e:81, XID 08000800 IRQ 42
Oct 26 16:37:25 JYH kernel: [ 2.643186] r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Oct 26 16:37:25 JYH kernel: [ 2.664399] usbcore: registered new interface driver usbhid
Oct 26 16:37:25 JYH kernel: [ 2.664401] usbhid: USB HID core driver
Oct 26 16:37:25 JYH kernel: [ 2.667927] logitech-djreceiver 0003:046D:C52B.0003: >hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input2
Oct 26 16:37:25 JYH kernel: [ 2.670401] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0003/input/input2
Oct 26 16:37:25 JYH kernel: [ 2.670450] logitech-djdevice 0003:046D:C52B.0004: >input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1.6:1
Oct 26 16:37:25 JYH kernel: [ 2.672469] input: Logitech Unifying Device. Wireless PID:400d as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0003/input/input3
Oct 26 16:37:25 JYH kernel: [ 2.672602] logitech-djdevice 0003:046D:C52B.0005: >input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400d] on usb-0000:00:1d.0-1.6:2
Oct 26 16:37:25 JYH kernel: [ 2.687727] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
Oct 26 16:37:25 JYH kernel: [ 2.687729] EXT4-fs (sda1): write access will be enabled during recovery
Oct 26 16:37:25 JYH kernel: [ 2.865276] EXT4-fs (sda1): recovery complete
Oct 26 16:37:25 JYH kernel: [ 2.865589] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Oct 26 16:37:25 JYH kernel: [ 3.061096] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 26 16:37:25 JYH kernel: [ 3.089163] lp: driver loaded but no devices found
Oct 26 16:37:25 JYH kernel: [ 3.109890] wmi: Mapper loaded
Oct 26 16:37:25 JYH kernel: [ 3.124002] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
Oct 26 16:37:25 JYH kernel: [ 3.124007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 26 16:37:25 JYH kernel: [ 3.124008] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
Oct 26 16:37:25 JYH kernel: [ 3.124010] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
Oct 26 16:37:25 JYH kernel: [ 3.124012] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 26 16:37:25 JYH kernel: [ 3.124014] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
Oct 26 16:37:25 JYH kernel: [ 3.124016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 26 16:37:25 JYH kernel: [ 3.124016] lpc_ich: Resource conflict(s) found affecting gpio_ich
Oct 26 16:37:25 JYH kernel: [ 3.128821] [drm] Initialized drm 1.1.0 20060810
Oct 26 16:37:25 JYH kernel: [ 3.132381] mei 0000:00:16.0: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 3.132508] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
Oct 26 16:37:25 JYH kernel: [ 3.138623] i915 0000:00:02.0: >setting latency timer to 64
Oct 26 16:37:25 JYH kernel: [ 3.139533] pci 0000:00:00.0: >Intel Ivybridge Chipset
Oct 26 16:37:25 JYH kernel: [ 3.139589] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
Oct 26 16:37:25 JYH kernel: [ 3.140317] pci 0000:00:00.0: >detected 262144K stolen memory
Oct 26 16:37:25 JYH kernel: [ 3.143320] mei 0000:00:16.0: >wd: failed to find the client
Oct 26 16:37:25 JYH kernel: [ 3.143448] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
Oct 26 16:37:25 JYH kernel: [ 3.172125] i915 0000:00:02.0: >irq 44 for MSI/MSI-X
Oct 26 16:37:25 JYH kernel: [ 3.172131] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 26 16:37:25 JYH kernel: [ 3.172132] [drm] Driver supports precise vblank timestamp query.
Oct 26 16:37:25 JYH kernel: [ 3.172546] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Oct 26 16:37:25 JYH kernel: [ 3.200483] asus_wmi: ASUS WMI generic driver loaded
Oct 26 16:37:25 JYH kernel: [ 3.201061] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
Oct 26 16:37:25 JYH kernel: [ 3.201094] asus_wmi: SFUN value: 0x0<6>[ 3.201286] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
Oct 26 16:37:25 JYH kernel: [ 3.203799] asus_wmi: Backlight controlled by ACPI video driver
Oct 26 16:37:25 JYH kernel: [ 3.204374] kvm: disabled by bios
Oct 26 16:37:25 JYH kernel: [ 3.204575] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
Oct 26 16:37:25 JYH kernel: [ 3.205299] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
Oct 26 16:37:25 JYH kernel: [ 3.206695] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
Oct 26 16:37:25 JYH kernel: [ 3.207570] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Oct 26 16:37:25 JYH kernel: [ 3.208093] kvm: disabled by bios
Oct 26 16:37:25 JYH kernel: [ 3.255034] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
Oct 26 16:37:25 JYH kernel: [ 3.290357] kvm: disabled by bios
Oct 26 16:37:25 JYH kernel: [ 3.294059] kvm: disabled by bios
Oct 26 16:37:25 JYH kernel: [ 3.392657] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
Oct 26 16:37:25 JYH kernel: [ 3.481739] Bluetooth: Core ver 2.16
Oct 26 16:37:25 JYH kernel: [ 3.481766] NET: Registered protocol family 31
Oct 26 16:37:25 JYH kernel: [ 3.481767] Bluetooth: HCI device and connection manager initialized
Oct 26 16:37:25 JYH kernel: [ 3.481860] Bluetooth: HCI socket layer initialized
Oct 26 16:37:25 JYH kernel: [ 3.481861] Bluetooth: L2CAP socket layer initialized
Oct 26 16:37:25 JYH kernel: [ 3.481863] Bluetooth: SCO socket layer initialized
Oct 26 16:37:25 JYH kernel: [ 3.483218] Bluetooth: RFCOMM TTY layer initialized
Oct 26 16:37:25 JYH kernel: [ 3.483221] Bluetooth: RFCOMM socket layer initialized
Oct 26 16:37:25 JYH kernel: [ 3.483222] Bluetooth: RFCOMM ver 1.11
Oct 26 16:37:25 JYH kernel: [ 3.484310] ppdev: user-space parallel port driver
Oct 26 16:37:25 JYH kernel: [ 3.498725] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 26 16:37:25 JYH kernel: [ 3.498728] Bluetooth: BNEP filters: protocol multicast
Oct 26 16:37:25 JYH NetworkManager[891]: <info> NetworkManager (version 0.9.6.0) is starting...
Oct 26 16:37:25 JYH NetworkManager[891]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Oct 26 16:37:25 JYH NetworkManager[891]: <info> WEXT support is enabled
Oct 26 16:37:25 JYH kernel: [ 3.532408] type=1400 audit(1351262245.282:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=882 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.532415] type=1400 audit(1351262245.282:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=884 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.532586] type=1400 audit(1351262245.282:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=882 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.532593] type=1400 audit(1351262245.282:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=884 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.532598] type=1400 audit(1351262245.282:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=868 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.532915] type=1400 audit(1351262245.282:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=868 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.533402] type=1400 audit(1351262245.286:8): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=885 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.533526] type=1400 audit(1351262245.286:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=883 comm="apparmor_parser"
Oct 26 16:37:25 JYH kernel: [ 3.533617] type=1400 audit(1351262245.286:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=885 comm="apparmor_parser"
Oct 26 16:37:25 JYH NetworkManager[891]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Oct 26 16:37:25 JYH NetworkManager[891]: <info> DNS: loaded plugin dnsmasq
Oct 26 16:37:25 JYH dbus[810]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Oct 26 16:37:25 JYH polkitd[903]: started daemon version 0.104 using authority implementation `local' version `0.104'
Oct 26 16:37:25 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: init!
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: update_system_hostname
Oct 26 16:37:25 JYH NetworkManager[891]: SCPluginIfupdown: management mode: unmanaged
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/net/eth0, iface: eth0)
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: end _init.
Oct 26 16:37:25 JYH NetworkManager[891]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list.
Oct 26 16:37:25 JYH NetworkManager[891]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Oct 26 16:37:25 JYH NetworkManager[891]: Ifupdown: get unmanaged devices count: 0
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: (33027888) ... get_connections.
Oct 26 16:37:25 JYH NetworkManager[891]: SCPlugin-Ifupdown: (33027888) ... get_connections (managed=false): return empty list.
Oct 26 16:37:25 JYH NetworkManager[891]: Ifupdown: get unmanaged devices count: 0
Oct 26 16:37:25 JYH NetworkManager[891]: <info> modem-manager is now available
Oct 26 16:37:25 JYH NetworkManager[891]: <info> monitoring kernel firmware directory '/lib/firmware'.
Oct 26 16:37:25 JYH NetworkManager[891]: <info> WiFi enabled by radio killswitch; enabled by state file
Oct 26 16:37:25 JYH NetworkManager[891]: <info> WWAN enabled by radio killswitch; enabled by state file
Oct 26 16:37:25 JYH NetworkManager[891]: <info> WiMAX enabled by radio killswitch; enabled by state file
Oct 26 16:37:25 JYH NetworkManager[891]: <info> Networking is enabled by state file
Oct 26 16:37:25 JYH NetworkManager[891]: <warn> failed to allocate link cache: (-10) Operation not supported
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): carrier is OFF
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): new Ethernet device (driver: 'r8169' ifindex: 2)
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): now managed
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): bringing up device.
Oct 26 16:37:25 JYH anacron[984]: Anacron 2.3 started on 2012-10-26
Oct 26 16:37:25 JYH acpid: starting up with proc fs
Oct 26 16:37:25 JYH cron[959]: (CRON) INFO (pidfile fd = 3)
Oct 26 16:37:25 JYH anacron[984]: Will run job `cron.daily' in 5 min.
Oct 26 16:37:25 JYH anacron[984]: Jobs will be executed sequentially
Oct 26 16:37:25 JYH ntpdate[1014]: Can't find host ntp.ubuntu.com: Name or service not known (-2)
Oct 26 16:37:25 JYH ntpdate[1014]: no servers can be used, exiting
Oct 26 16:37:25 JYH cron[1016]: (CRON) STARTUP (fork ok)
Oct 26 16:37:25 JYH cron[1016]: (CRON) INFO (Running @reboot jobs)
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): preparing device.
Oct 26 16:37:25 JYH NetworkManager[891]: <info> (eth0): deactivating device (reason 'managed') [2]
Oct 26 16:37:25 JYH NetworkManager[891]: <info> Added default wired connection 'Connexion filaire 1' for /sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/net/eth0
Oct 26 16:37:25 JYH kernel: [ 3.634390] r8169 0000:03:00.0: >eth0: link down
Oct 26 16:37:25 JYH kernel: [ 3.634407] r8169 0000:03:00.0: >eth0: link down
Oct 26 16:37:25 JYH kernel: [ 3.634928] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 26 16:37:25 JYH kernel: [ 3.635118] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 26 16:37:25 JYH NetworkManager[891]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Oct 26 16:37:25 JYH NetworkManager[891]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Oct 26 16:37:25 JYH acpid: 33 rules loaded
Oct 26 16:37:25 JYH acpid: waiting for events: event logging is off
Oct 26 16:37:25 JYH kernel: [ 4.050154] fbcon: inteldrmfb (fb0) is primary device
Oct 26 16:37:25 JYH kernel: [ 4.050235] Console: switching to colour frame buffer device 240x67
Oct 26 16:37:25 JYH kernel: [ 4.050254] fb0: inteldrmfb frame buffer device
Oct 26 16:37:25 JYH kernel: [ 4.050254] drm: registered panic notifier
Oct 26 16:37:25 JYH kernel: [ 4.053235] acpi device:44: >registered as cooling_device9
Oct 26 16:37:25 JYH kernel: [ 4.053338] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Oct 26 16:37:25 JYH kernel: [ 4.053373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
Oct 26 16:37:25 JYH kernel: [ 4.053422] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 26 16:37:25 JYH kernel: [ 4.053502] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
Oct 26 16:37:26 JYH acpid: client connected from 1207[0:0]
Oct 26 16:37:26 JYH acpid: 1 client rule loaded
Oct 26 16:37:26 JYH kernel: [ 4.609330] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
Oct 26 16:37:26 JYH kernel: [ 4.609459] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Oct 26 16:37:26 JYH kernel: [ 4.609604] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Oct 26 16:37:26 JYH kernel: [ 4.609732] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Oct 26 16:37:26 JYH kernel: [ 4.609861] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Oct 26 16:37:26 JYH kernel: [ 4.610026] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Oct 26 16:37:27 JYH dbus[810]: [system] Activating service name='org.freedesktop.Accounts' (using servicehelper)
Oct 26 16:37:27 JYH accounts-daemon[1229]: started daemon version 0.6.21
Oct 26 16:37:27 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.Accounts'
Oct 26 16:37:27 JYH dbus[810]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Oct 26 16:37:27 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Oct 26 16:37:28 JYH dbus[810]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Oct 26 16:37:28 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.UPower'
Oct 26 16:37:28 JYH dbus[810]: [system] Activating service name='org.freedesktop.RealtimeKit1' (using servicehelper)
Oct 26 16:37:28 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully called chroot.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully dropped privileges.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully limited resources.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Running.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Watchdog thread running.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Canary thread running.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully made thread 1454 of process 1454 (n/a) owned by '110' high priority at nice level -11.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Supervising 1 threads of 1 processes of 1 users.
Oct 26 16:37:28 JYH goa[1470]: goa-daemon version 3.6.0 starting [main.c:112, main()]
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully made thread 1497 of process 1454 (n/a) owned by '110' RT at priority 5.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Supervising 2 threads of 1 processes of 1 users.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully made thread 1498 of process 1454 (n/a) owned by '110' RT at priority 5.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Supervising 3 threads of 1 processes of 1 users.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Successfully made thread 1501 of process 1501 (n/a) owned by '110' high priority at nice level -11.
Oct 26 16:37:28 JYH rtkit-daemon[1459]: Supervising 4 threads of 2 processes of 1 users.
Oct 26 16:37:28 JYH pulseaudio[1501]: [pulseaudio] pid.c: Daemon already running.
Oct 26 16:37:28 JYH dbus[810]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Oct 26 16:37:28 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 26 16:37:28 JYH NetworkManager[891]: <info> (eth0): carrier now ON (device state 20)
Oct 26 16:37:28 JYH NetworkManager[891]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Auto-activating connection 'Connexion filaire 1'.
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) starting connection 'Connexion filaire 1'
Oct 26 16:37:28 JYH NetworkManager[891]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Oct 26 16:37:28 JYH NetworkManager[891]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 26 16:37:28 JYH kernel: [ 7.077663] r8169 0000:03:00.0: >eth0: link up
Oct 26 16:37:28 JYH kernel: [ 7.078022] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Oct 26 16:37:28 JYH NetworkManager[891]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Oct 26 16:37:28 JYH NetworkManager[891]: <info> dhclient started with pid 1601
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Beginning IP6 addrconf.
Oct 26 16:37:28 JYH dhclient: Internet Systems Consortium DHCP Client 4.2.4
Oct 26 16:37:28 JYH dhclient: Copyright 2004-2012 Internet Systems Consortium.
Oct 26 16:37:28 JYH dhclient: All rights reserved.
Oct 26 16:37:28 JYH dhclient: For info, please visit https://www.isc.org/software/dhcp/
Oct 26 16:37:28 JYH dhclient:
Oct 26 16:37:28 JYH NetworkManager[891]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Oct 26 16:37:28 JYH NetworkManager[891]: <info> (eth0): DHCPv4 state changed nbi -> preinit
Oct 26 16:37:28 JYH dhclient: Listening on LPF/eth0/30:85:a9:40:0e:81
Oct 26 16:37:28 JYH dhclient: Sending on LPF/eth0/30:85:a9:40:0e:81
Oct 26 16:37:28 JYH dhclient: Sending on Socket/fallback
Oct 26 16:37:28 JYH dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Oct 26 16:37:28 JYH dhclient: DHCPREQUEST of 192.168.0.12 on eth0 to 255.255.255.255 port 67
Oct 26 16:37:28 JYH dhclient: DHCPOFFER of 192.168.0.12 from 192.168.0.1
Oct 26 16:37:29 JYH dhclient: DHCPACK of 192.168.0.12 from 192.168.0.1
Oct 26 16:37:29 JYH dhclient: bound to 192.168.0.12 -- renewal in 33210 seconds.
Oct 26 16:37:29 JYH NetworkManager[891]: <info> (eth0): DHCPv4 state changed preinit -> bound
Oct 26 16:37:29 JYH NetworkManager[891]: <info> address 192.168.0.12
Oct 26 16:37:29 JYH NetworkManager[891]: <info> prefix 24 (255.255.255.0)
Oct 26 16:37:29 JYH NetworkManager[891]: <info> gateway 192.168.0.1
Oct 26 16:37:29 JYH NetworkManager[891]: <info> nameserver '89.2.0.1'
Oct 26 16:37:29 JYH NetworkManager[891]: <info> nameserver '89.2.0.2'
Oct 26 16:37:29 JYH NetworkManager[891]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Oct 26 16:37:29 JYH NetworkManager[891]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started...
Oct 26 16:37:30 JYH NetworkManager[891]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Oct 26 16:37:30 JYH NetworkManager[891]: <info> DNS: starting dnsmasq...
Oct 26 16:37:30 JYH NetworkManager[891]: <error> [1351262250.860836] [nm-dns-dnsmasq.c:390] update(): dnsmasq not available on the bus, can't update servers.
Oct 26 16:37:30 JYH NetworkManager[891]: <error> [1351262250.860852] [nm-dns-dnsmasq.c:392] update(): dnsmasq owner not found on bus: Could not get owner of name 'org.freedesktop.NetworkManager.dnsmasq': no such name
Oct 26 16:37:30 JYH NetworkManager[891]: <warn> DNS: plugin dnsmasq update failed
Oct 26 16:37:30 JYH NetworkManager[891]: <info> ((null)): writing resolv.conf to /sbin/resolvconf
Oct 26 16:37:30 JYH dnsmasq[1612]: démarrage avec le cache désactivé (version 2.63rc6)
Oct 26 16:37:30 JYH dnsmasq[1612]: options à la compilation : IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 no-Lua TFTP conntrack
Oct 26 16:37:30 JYH dnsmasq[1612]: Support DBus autorisé : connecté au bus système
Oct 26 16:37:30 JYH dnsmasq[1612]: attention : aucun serveur amont n'est configuré
Oct 26 16:37:30 JYH NetworkManager[891]: <info> Policy set 'Connexion filaire 1' (eth0) as default for IPv4 routing and DNS.
Oct 26 16:37:30 JYH NetworkManager[891]: <info> Activation (eth0) successful, device activated.
Oct 26 16:37:30 JYH NetworkManager[891]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete.
Oct 26 16:37:30 JYH dbus[810]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Oct 26 16:37:30 JYH NetworkManager[891]: <warn> dnsmasq appeared on DBus: :1.42
Oct 26 16:37:30 JYH NetworkManager[891]: <info> ((null)): writing resolv.conf to /sbin/resolvconf
Oct 26 16:37:30 JYH dnsmasq[1612]: configuration des serveurs amonts à partir de DBus
Oct 26 16:37:30 JYH dnsmasq[1612]: utilise le serveur de nom 89.2.0.2#53
Oct 26 16:37:30 JYH dnsmasq[1612]: utilise le serveur de nom 89.2.0.1#53
Oct 26 16:37:30 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 26 16:37:32 JYH rtkit-daemon[1459]: Successfully made thread 1893 of process 1893 (n/a) owned by '1000' high priority at nice level -11.
Oct 26 16:37:32 JYH rtkit-daemon[1459]: Supervising 4 threads of 2 processes of 2 users.
Oct 26 16:37:32 JYH dbus[810]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Oct 26 16:37:32 JYH udisksd[1909]: udisks daemon version 2.0.0 starting
Oct 26 16:37:32 JYH dbus[810]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Oct 26 16:37:32 JYH udisksd[1909]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Oct 26 16:37:32 JYH rtkit-daemon[1459]: Successfully made thread 1924 of process 1893 (n/a) owned by '1000' RT at priority 5.
Oct 26 16:37:32 JYH rtkit-daemon[1459]: Supervising 5 threads of 2 processes of 2 users.
Oct 26 16:37:33 JYH rtkit-daemon[1459]: Successfully made thread 1925 of process 1893 (n/a) owned by '1000' RT at priority 5.
Oct 26 16:37:33 JYH rtkit-daemon[1459]: Supervising 6 threads of 2 processes of 2 users.
Oct 26 16:37:35 JYH goa[2046]: goa-daemon version 3.6.0 starting [main.c:112, main()]
Oct 26 16:37:39 JYH ntpdate[1730]: adjust time server 91.189.94.4 offset -0.157225 sec
Oct 26 16:37:48 JYH NetworkManager[891]: <info> (eth0): IP6 addrconf timed out or failed.
Oct 26 16:37:48 JYH NetworkManager[891]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Oct 26 16:37:48 JYH NetworkManager[891]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Oct 26 16:37:48 JYH NetworkManager[891]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.Hors ligne
#10 Le 26/10/2012, à 16:48
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Pas de changement depuis la désinstallation du driver obsolète (ça lag aléatoirement).
Autre fait très étrange : dans mon BIOS (UEFI avec souris) le clavier et la souris marchent impec. C'est vraiment que sous Ubuntu qu'il y a des problèmes. Comme ces derniers s'amplifient lorsque je branche des terminaux usb sur d'autres ports, je pense que le clavier la souris sont bien reconnus par le driver mais que quelque chose d'autre perturbe tout ça...
Hors ligne
#11 Le 27/10/2012, à 06:59
- F50
Re : Clavier et souris logitech sans fil extrêmement lents !
Tu as bien fais une install buntu correspondante au BIOS UEFI? Car si tas autres os sont en UEFI tu dois le faire pour buntu aussi:
#12 Le 30/10/2012, à 14:00
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
En effet j'ai fait une installation Legacy (non EFI). Mais comme je n'ai pas d'autre OS je ne crois pas que cela pose problème. Par contre je me suis rendu compte que ma RAM n'était pas compatible avec ma carte mère... peut-être le problème vient-il de là. Je suis en route pour en acheter une autre.
Hors ligne
#13 Le 30/10/2012, à 18:37
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Bon bah le remplacement de la mémoire vive n'apporte rien ! J'en ai acheté de nouvelles suite à la détection de très nombreuses erreurs dans memtest86, mais il se trouve que c'est un bug de memtest (cf https://bugs.launchpad.net/ubuntu/+sour … g/1071209)... Bref retour case départ, SAUF QUE mon clavier / souris rament aussi dans le BIOS, donc je pense que c'est matériel. Au vu de ma config, si quelqu'un a une idée de pourquoi le logitech unifying rame de façon aléatoire.....
Hors ligne
#14 Le 30/10/2012, à 19:59
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Correction : dans le BIOS il y a quelques lags, mais ce n'est pas tout à fait pareil. Par exemple le clavier et la souris marchent très bien lorsque je les connecte à l'un de mes ports USB 3.0, alors que sous Ubuntu ça ne marche jamais dans ce cas... Donc il doit y avoir quelque chose avec Ubuntu 
Hors ligne
#15 Le 31/10/2012, à 11:13
- F50
Re : Clavier et souris logitech sans fil extrêmement lents !
Ah ok pour le UEFI, j'avais cru que tu avais w$ en UEFI. Je ne sais pas très bien où chercher mais tu as activé les ports USB dans le BIOS>usb legacy et usb mass storage sur enable? Chez moi ça fonctionne parfaitement le récepteur unifying.
Dernière modification par faucon50 (Le 31/10/2012, à 11:18)
#16 Le 05/11/2012, à 04:08
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Désolé j'avais pas vu que tu m'avais répondu 
J'ai bien activé l'usb en legacy (je n'ai pas l'autre option par contre).
Autre bizarerie : si je branche mon capteur sur l'un des ports USB3 il marche dans le BIOS, mais pas sous UBUNTU...
Par contre ces ports USB3 marchent sans problème avec une clé usb sous ubuntu...
Si quelqu'un a une idée...
Hors ligne
#17 Le 05/11/2012, à 04:09
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Est-ce qu'il y a une chance que ce soit un problème de la carte mère ? Comme elle est sous garantie...
Hors ligne
#18 Le 04/01/2013, à 17:19
- rosch
Re : Clavier et souris logitech sans fil extrêmement lents !
J'ai un souci pareil, mais c'est seulement la souris dont le mouvement est saccadé.
Ce n'est observable que sous gnome-shell. Pas de soucis sous unity, ni sur la page de login (unity-greeter), donc avant le chargement de la session.
Quelle type de session utilises-tu?
Dernière modification par rosch (Le 04/01/2013, à 17:20)
Hors ligne
#19 Le 05/01/2013, à 06:13
- F50
Re : Clavier et souris logitech sans fil extrêmement lents !
Pour qui la question? Perso Xfce.
#20 Le 05/01/2013, à 12:55
- rosch
Re : Clavier et souris logitech sans fil extrêmement lents !
A tous mais plus spécifiquement à Arkadias comme c'est lui qui a/avais le souci.
Hors ligne
#21 Le 05/01/2013, à 14:38
- Arkandias
Re : Clavier et souris logitech sans fil extrêmement lents !
Je suis sous Unity.
Finalement ça s'est résolu : le problème des ports USB 3.0 c'est un bug connu (et dans le BIOS l'USB 3.0 n'était pas activé c'est pour ça qu'ils marchaient quand même).
Pour ce qui est des saccades j'ai déporté mon port USB avec la rallonge fournie avec la souris et tout va bien (sauf au démarrage la souris rame sur ce pc et pas sur les autres, mais bon...) : mon matériel devait faire des interférences (lorsque je branchais un périphérique, ou que j'utilisais certaines ressources...?).
Hors ligne
#22 Le 05/01/2013, à 15:27
- rosch
Re : Clavier et souris logitech sans fil extrêmement lents !
Merci pour ces précisions.
Je n'ai pas de port USB 3.0, et comme la souris n'a ces saccades que sous gnome-shell je ne pense pas que c'est un souci matériel.
J'espère qu'une des mises à jour du système réglera le problème.
Hors ligne