Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1 Le 16/05/2005, à 14:30

didier

wifi via module ipW2200/acerhk kotkey ne fonctionne pas

Bonjour,

sous ubuntu hoary 2.6.10-5-386
Portable Xbook XB6 avec bouton de connexion hotkey sous module acerhk
wifi via intel IPW2200

J'ai suivi diférents post notamment sous ce forum mais rien qui ne fonctionne. en dernier ressort je lance ce post.

Après un sudo modprobe acerhk et sudo modprobe ipw2200

perso@nc:~$ lsmod
Module                  Size  Used by
proc_intf               4100  0
freq_table              4100  0
cpufreq_userspace       4572  0
cpufreq_ondemand        6172  0
cpufreq_powersave       1920  0
pcmcia                 21380  2
i915                   18304  1
drm                    59412  2 i915
video                  16260  0
sony_acpi               6280  0
pcc_acpi               11264  0
button                  6800  0
battery                10244  0
container               4608  0
ac                      4996  0
ipv6                  229504  9
yenta_socket           19584  0
pcmcia_core            53568  2 pcmcia,yenta_socket
8139cp                 19200  0
8139too                24320  0
mii                     4736  2 8139cp,8139too
ohci1394               31876  0
snd_intel8x0           29984  2
snd_ac97_codec         64608  1 snd_intel8x0
snd_pcm_oss            47652  1
snd_mixer_oss          16768  2 snd_pcm_oss
snd_pcm                84872  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              23300  1 snd_pcm
snd                    50276  6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               9824  3 snd
snd_page_alloc          9604  2 snd_intel8x0,snd_pcm
i2c_i801                8076  0
i2c_core               21264  1 i2c_i801
shpchp                 86116  0
pci_hotplug            30512  1 shpchp
usbhid                 29376  0
ehci_hcd               29444  0
uhci_hcd               30224  0
usbcore               107384  4 usbhid,ehci_hcd,uhci_hcd
intel_agp              20636  1
agpgart                31784  3 drm,intel_agp
pcspkr                  3816  0
rtc                    12216  0
md                     43856  0
dm_mod                 53116  1
capability              5000  0
commoncap               7808  1 capability
ipw2200                80904  0
firmware_class          9728  1 ipw2200
ieee80211              21892  1 ipw2200
evdev                   9088  0
tsdev                   7488  0
ieee80211_crypt         5832  2 ipw2200,ieee80211
acerhk                 34019  1
sr_mod                 16036  0
sbp2                   22408  0
scsi_mod              119936  2 sr_mod,sbp2
ieee1394              100408  2 ohci1394,sbp2
psmouse                19336  0
mousedev               11160  1
parport_pc             34372  1
lp                     10792  0
parport                33480  2 parport_pc,lp
ide_cd                 38532  0
cdrom                  36508  2 sr_mod,ide_cd
ext3                  120968  1
jbd                    54168  1 ext3
ide_generic             1664  0
piix                    9988  1
ide_disk               18176  3
ide_core              118988  4 ide_cd,ide_generic,piix,ide_disk
unix                   26164  826
thermal                13576  0
processor              22708  1 thermal
fan                     4612  0
fbcon                  34048  71
font                    8448  1 fbcon
bitblit                 5120  1 fbcon
vesafb                  6948  1
cfbcopyarea             3968  1 vesafb
cfbimgblt               3072  1 vesafb
cfbfillrect             3584  1 vesafb

les modules ipw2200 et acerhk sont biens chargés

perso@nc:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

Pas de reconnaissance de wlan

perso@nc:~$ dmesg
de.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro quiet splash vga=791
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1299.163 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 495900k/507840k available (1436k kernel code, 11296k reserved, 754k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2580.48 BogoMIPS (lpj=1290240)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000000 00000000
CPU: Intel(R) Celeron(R) M processor         1.30GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4248k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xe97e4, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Via IRQ fixup
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
ACPI: Embedded Controller [EC0] (gpe 28)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x37 set to 0x1
audit: initializing netlink socket (disabled)
audit(1116248259.167:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:00:1f.6[b] -> GSI 17 (level, low) -> IRQ 17
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
ELAN USB1 USB2 USB3 EUSB MODM
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4248KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
vesafb: framebuffer at 0xb0000000, mapped to 0xdf880000, using 3072k, total 16192k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 128x48
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0402H, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
Probing IDE interface ide1...
hdc: COMPAL TSB24H1 Slim DVD-ROM/CD-RW Drive, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (455 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
Adding 1461872k swap on /dev/hda5.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: PS/2 Generic Mouse on isa0060/serio4
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
acerhk: Could not find model string, will assume type 200 series
Unable to handle kernel paging request at virtual address 00009610
printing eip:
c00f0000
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: acerhk sr_mod sbp2 scsi_mod ieee1394 psmouse mousedev parport_pc lp parport ide_cd cdrom ext3 jbd ide_generic piix ide_disk ide_core unix thermal processor fan fbcon font bitblit vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU:    0
EIP:    0060:[<c00f0000>]    Not tainted VLI
EFLAGS: 00010086   (2.6.10-5-386)
EIP is at 0xc00f0000
eax: 00009610   ebx: 0000051c   ecx: dfcf6a14   edx: c0116237
esi: dfcf6a14   edi: dfcf36e0   ebp: dfcb8400   esp: c150ff40
ds: 007b   es: 007b   ss: 0068
Process modprobe (pid: 2281, threadinfo=c150e000 task=deae6500)
Stack: dfcf0697 c150ff7c dfcf6a14 c150e000 c150e000 c150ff68 c150e000 c150ff7c
       00000000 c00f0000 c150e000 c150e000 dfcf6a14 dfcf09ea c150ff7c 00009610
       0000051c dfcf6a14 c0116237 dfcf36e0 dfcf6a14 dfbe2781 000000c8 00000000
Call Trace:
[<dfcf0697>] call_bios_52x+0x33/0x4c [acerhk]
[<dfcf09ea>] get_cmos_index+0x26/0x58 [acerhk]
[<c0116237>] printk+0xe/0x11
[<dfbe2781>] setup_model_features+0xa1/0x408 [acerhk]
[<dfbe36e1>] model_init+0x35/0x70 [acerhk]
[<dfbe3824>] acerhk_init+0x108/0x203 [acerhk]
[<c0129ac1>] sys_init_module+0xd4/0x1c3
[<c0102fa1>] sysenter_past_esp+0x52/0x75
Code: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff eb <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<6>note: modprobe[2281] exited with preempt_count 1
ieee80211_crypt: registered algorithm 'NULL'
ts: Compaq touchscreen protocol output
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.3
ipw2200: Copyright(c) 2003-2004 Intel Corporation
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
Real Time Clock Driver v1.12
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 424M
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xb0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0x1200
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0x1600
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0x1700
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xf0080000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
usbcore: registered new driver hiddev
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-1: new low speed USB device using uhci_hcd and address 3
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
hw_random: cannot enable RNG, aborting
ACPI: PCI interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49473 usecs
intel8x0: clocking to 48000
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[e0000800-e0000fff]  Max Packet=[2048]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xc000, 00:02:3f:09:d6:9f, IRQ 21
eth0:  Identified 8139 chip type 'RTL-8101'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16
Yenta: CardBus bridge found at 0000:01:04.0 [14c0:0012]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Yenta: ISA IRQ mask 0x0030, PCI irq 16
Socket status: 30000006
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f495c406a8f]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f0500(lo)
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
apm: BIOS not found.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
mtrr: 0xb0000000,0x8000000 overlaps existing 0xb0000000,0x800000
[drm] Initialized i915 1.2.0 20040405 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
mtrr: 0xb0000000,0x8000000 overlaps existing 0xb0000000,0x800000
[drm] Initialized i915 1.2.0 20040405 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2)
mtrr: base(0xb0020000) is not aligned on a size(0x300000) boundary
mtrr: 0xb0000000,0x8000000 overlaps existing 0xb0000000,0x800000
cs: IO port probe 0x0100-0x04ff: excluding 0x230-0x237 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: no IPv6 routers present
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef

Le pbl vient-t-il de ceci ?

perso@nc:~$ cat /proc/driver/acerhk/info
Acer hotkeys version 0.5.23
Model(Type)     : (old)
request handler : 0xc00f0000
CMOS index      : not available
kernel polling  : inactive
autoswitch wlan : disabled
preg400         : 0xdfcb8400

ceci, ci-dessous ne donne rien de plus

perso@nc:~$ sudo modprobe acerhk force_series=290 usedritek=1 verbose=1 echo 1 > /proc/driver/acerhk/wirelessled

et pout finir

perso@nc:~$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8

@ vous lire

Didier

#2 Le 19/05/2005, à 22:28

Rom1

Re : wifi via module ipW2200/acerhk kotkey ne fonctionne pas

tu as bien mit le firmware pour le module ipw2200 ?

Hors ligne

#3 Le 21/05/2005, à 08:28

Didier

Re : wifi via module ipW2200/acerhk kotkey ne fonctionne pas

Bonjour,

Oui, je l'ai bien installé en prenant soin de copier les fichiers dans /lib....

Je pense que le soucis vient en fait du module acerhk.

Didier

#4 Le 04/06/2005, à 23:48

toma

Re : wifi via module ipW2200/acerhk kotkey ne fonctionne pas

Bonjour !

J'ai le meme pb que toi ! Pourrai me donner les differents liens vers les posts que tu as lu pour installer (oud u moins essayer de le faire) ces drivers ?

Merci Bcp et bon courage !

#5 Le 25/06/2005, à 01:22

SkeRoy

Re : wifi via module ipW2200/acerhk kotkey ne fonctionne pas

Je n'ai pas encore essayé (j'ai le XB7 v2), mais j'ai trouvé ça qui peut être pas mal :

http://ubuntuforums.org/showthread.php?t=26623

EDIT: et je viens de trouver ça aussi: http://epsm.fr/wiki/Linux/CompalAT23Ave … comments=0
et ça : http://www.informatik.hu-berlin.de/~tauber/acerhk/
Sur cette page c'est très intéressant : http://rfswitch.sourceforge.net/?page=laptop_matrix:

To use the software switch, use the acerhk module (supported since version 0.5.25)

Alors que du site de xbook ils donnent la version 0.5.16, qui donc ne servirait à rien...

Dernière modification par SkeRoy (Le 25/06/2005, à 01:39)


== Debian Lenny == {Linux User #422949}

Hors ligne

#6 Le 01/11/2005, à 12:03

dc

Re : wifi via module ipW2200/acerhk kotkey ne fonctionne pas

Bonjour,

bon, j'ai toujours pas réglé ce problème.
J'ai installé le dernier acerhk 0.5.28, réinstallé ipw2200.
Lorsque je fait

modprobe acerhk
la réponse est (comme souvent), erreur de segmentation.

si je fais

modprobe acerhk usedritek=1 autowlan=1 force_series=290
echo 1 > /proc/driver/acerhk/wirelessled

alors c'est le top avec un freeze général. Plus aucune réponse des touches rien nada, je suis obligé de relancer sauvagement en coupant tout.

Pour info, la touche Fn+F5 produit le même effet, freeze général.

Voici qqs infos.

perso@nc:/proc/driver/acerhk$ cat info
Acer hotkeys version 0.5.28
Model(Type)     : (old)
request handler : 0xc00f0000
CMOS index      : not available
kernel polling  : inactive
autoswitch wlan : disabled
preg400         : 0xdfe44400


dmesg

perso@nc:/proc/driver/acerhk$ dmesg
bind 16384)
[4294672.569000] NET: Registered protocol family 8
[4294672.569000] NET: Registered protocol family 20
[4294672.569000] ACPI wakeup devices:
[4294672.569000] ELAN USB1 USB2 USB3 EUSB MODM
[4294672.569000] ACPI: (supports S0 S1 S3 S4 S5)
[4294672.569000] Freeing unused kernel memory: 224k freed
[4294672.583000] vga16fb: initializing
[4294672.583000] vga16fb: mapped to 0xc00a0000
[4294672.695000] Console: switching to colour frame buffer device 80x30
[4294672.695000] fb0: VGA16 VGA frame buffer device
[4294673.165000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294673.791000] Capability LSM initialized
[4294673.802000] NET: Registered protocol family 1
[4294673.817000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.818000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294673.818000] ACPI: bus type ide registered
[4294673.822000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[4294673.822000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294673.822000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294673.822000] ICH4: chipset revision 3
[4294673.822000] ICH4: not 100% native mode: will probe irqs later
[4294673.822000]     ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[4294673.822000]     ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[4294673.822000] Probing IDE interface ide0...
[4294674.239000] hda: SAMSUNG MP0402H, ATA DISK drive
[4294674.851000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.851000] Probing IDE interface ide1...
[4294675.523000] hdc: COMPAL TSB24H1 Slim DVD-ROM/CD-RW Drive, ATAPI CD/DVD-ROM drive
[4294676.135000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.135000] Probing IDE interface ide2...
[4294676.648000] Probing IDE interface ide3...
[4294677.160000] Probing IDE interface ide4...
[4294677.672000] Probing IDE interface ide5...
[4294678.187000] hda: max request size: 1024KiB
[4294678.613000] hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
[4294678.613000] hda: cache flushes supported
[4294678.613000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294678.657000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[4294678.657000] Uniform CD-ROM driver Revision: 3.20
[4294678.897000] Attempting manual resume
[4294678.898000] swsusp: Suspend partition has wrong signature?
[4294678.949000] usbcore: registered new driver usbfs
[4294678.949000] usbcore: registered new driver hub
[4294678.950000] USB Universal Host Controller Interface driver v2.2
[4294678.950000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294678.950000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294678.950000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
[4294679.012000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294679.012000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001200
[4294679.012000] hub 1-0:1.0: USB hub found
[4294679.012000] hub 1-0:1.0: 2 ports detected
[4294679.015000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[4294679.015000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294679.015000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
[4294679.077000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294679.077000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001600
[4294679.077000] hub 2-0:1.0: USB hub found
[4294679.077000] hub 2-0:1.0: 2 ports detected
[4294679.080000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[4294679.080000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294679.080000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
[4294679.142000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294679.142000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001700
[4294679.142000] hub 3-0:1.0: USB hub found
[4294679.142000] hub 3-0:1.0: 2 ports detected
[4294679.170000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[4294679.170000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294679.171000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
[4294679.171000] ehci_hcd 0000:00:1d.7: debug port 1
[4294679.171000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[4294679.171000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0080000
[4294679.174000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294679.174000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294679.175000] hub 4-0:1.0: USB hub found
[4294679.175000] hub 4-0:1.0: 6 ports detected
[4294679.262000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294679.262000] 8139cp: pci dev 0000:01:01.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294679.262000] 8139cp: Try the "8139too" driver instead.
[4294679.264000] 8139too Fast Ethernet driver 0.9.27
[4294679.264000] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[4294679.264000] eth0: RealTek RTL8139 at 0xc000, 00:02:3f:09:d6:9f, IRQ 21
[4294679.264000] eth0:  Identified 8139 chip type 'RTL-8101'
[4294679.811000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[4294681.308000] usbcore: registered new driver hiddev
[4294681.325000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
[4294681.325000] usbcore: registered new driver usbhid
[4294681.325000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294681.631000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[4294681.631000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294681.770000] Attempting manual resume
[4294681.770000] swsusp: Suspend partition has wrong signature?
[4294681.785000] kjournald starting.  Commit interval 5 seconds
[4294681.785000] EXT3-fs: mounted filesystem with ordered data mode.
[4294683.085000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.343000] Adding 1461872k swap on /dev/hda5.  Priority:-1 extents:1
[4294686.591000] EXT3 FS on hda1, internal journal
[4294693.814000] parport: PnPBIOS parport detected.
[4294693.814000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[4294693.900000] lp0: using parport0 (interrupt-driven).
[4294693.934000] mice: PS/2 mouse device common for all mice
[4294693.976000] ieee1394: Initialized config rom entry `ip1394'
[4294693.994000] SCSI subsystem initialized
[4294693.999000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
[4294694.471000] alps.c: Enabling hardware tapping
[4294694.533000] input: PS/2 Mouse on isa0060/serio4
[4294694.536000] input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
[4294695.058000] ts: Compaq touchscreen protocol output
[4294698.175000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294699.345000] cdrom: open failed.
[4294701.408000] Linux agpgart interface v0.101 (c) Dave Jones
[4294701.416000] agpgart: Detected an Intel 855 Chipset.
[4294701.417000] agpgart: Detected 16252K stolen memory.
[4294701.440000] agpgart: AGP aperture is 128M @ 0xb0000000
[4294701.788000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294701.821000] shpchp: shpc_init : shpc_cap_offset == 0
[4294701.821000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294701.878000] hw_random: cannot enable RNG, aborting
[4294702.344000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 17
[4294702.344000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294703.154000] intel8x0_measure_ac97_clock: measured 49472 usecs
[4294703.154000] intel8x0: clocking to 48000
[4294703.756000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
[4294703.756000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294703.756000] PCI: Via IRQ fixup for 0000:01:00.0, from 11 to 4
[4294703.813000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[e0000800-e0000fff]  Max Packet=[2048]
[4294703.981000] Linux Kernel Card Services
[4294703.981000]   options:  [pci] [cardbus] [pm]
[4294703.994000] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294703.994000] Yenta: CardBus bridge found at 0000:01:04.0 [14c0:0012]
[4294703.994000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294703.994000] Yenta: Routing CardBus interrupts to PCI
[4294703.994000] Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46
[4294704.215000] Yenta: ISA IRQ mask 0x0000, PCI irq 16
[4294704.215000] Socket status: 30000006
[4294705.077000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f495c406a8f][4294706.137000] Real Time Clock Driver v1.12
[4294706.222000] input: PC Speaker
[4294706.519000] wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.2
[4294706.519000] wbsd: Copyright(c) Pierre Ossman
[4294706.523000] pnp: Device 00:0a activated.
[4294706.528000] mmc0: W83L51xD id 7112 at 0x248 irq 5 FIFO PnP
[4294707.617000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294710.504000] NET: Registered protocol family 10
[4294710.505000] Disabled Privacy Extensions on device c02eb280(lo)
[4294710.505000] IPv6 over IPv4 tunneling driver
[4294711.694000] ACPI: AC Adapter [ACAD] (off-line)
[4294711.783000] ACPI: Battery Slot [BAT1] (battery present)
[4294711.805000] ACPI: Power Button (FF) [PWRF]
[4294711.805000] ACPI: Lid Switch [LID]
[4294711.805000] ACPI: Power Button (CM) [PWRB]
[4294711.805000] ACPI: Sleep Button (CM) [SLPB]
[4294711.918000] ibm_acpi: ec object not found
[4294712.043000] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)[4294717.675000] [drm] Initialized drm 1.0.0 20040925
[4294717.680000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294717.684000] [drm] Initialized i915 1.2.0 20040405 on minor 0: Intel Corporation 82852/855GM Integrated Graphics Device
[4294717.684000] PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
[4294717.688000] [drm] Initialized i915 1.2.0 20040405 on minor 1: Intel Corporation 82852/855GM Integrated Graphics Device (#2)
[4294717.689000] mtrr: base(0xb0020000) is not aligned on a size(0x300000) boundary
[4294721.364000] eth0: no IPv6 routers present
[4294724.940000] apm: BIOS not found.
[4294725.730000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[4294726.805000] cs: IO port probe 0x100-0x4ff: excluding 0x230-0x237 0x4d0-0x4d7
[4294726.807000] cs: IO port probe 0xc00-0xcf7: clean.
[4294726.808000] cs: IO port probe 0xa00-0xaff: clean.
[4294733.693000] Bluetooth: Core ver 2.7
[4294733.693000] NET: Registered protocol family 31
[4294733.693000] Bluetooth: HCI device and connection manager initialized
[4294733.693000] Bluetooth: HCI socket layer initialized
[4294733.784000] Bluetooth: L2CAP ver 2.7
[4294733.784000] Bluetooth: L2CAP socket layer initialized
[4294733.839000] Bluetooth: RFCOMM ver 1.5
[4294733.839000] Bluetooth: RFCOMM socket layer initialized
[4294733.839000] Bluetooth: RFCOMM TTY layer initialized
[4294767.485000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[4294767.485000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294767.624000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[4294767.624000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294767.852000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[4294767.852000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294767.935000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[4294767.935000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294768.125000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[4294768.125000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294768.235000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[4294768.235000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294768.443000] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[4294768.443000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294768.553000] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[4294768.553000] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[4294879.760000] ieee80211_crypt: registered algorithm 'NULL'
[4294879.782000] ieee80211: 802.11 data/management/control stack, 1.1.6
[4294879.782000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294879.788000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8
[4294879.788000] ipw2200: Copyright(c) 2003-2005 Intel Corporation
[4294898.635000] acerhk: Could not find model string, will assume type 200 series
[4294898.635000] Unable to handle kernel paging request at virtual address 00009610
[4294898.635000]  printing eip:
[4294898.635000] c00f0000
[4294898.635000] *pde = 00000000
[4294898.635000] Oops: 0002 [#1]
[4294898.635000] Modules linked in: acerhk ipw2200 firmware_class ieee80211 ieee80211_crypt rfcomm l2cap bluetooth cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative pcmcia nfsd exportfs lockd sunrpc i915 drm video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi i2c_acpi_ec i2c_core button battery container ac ipv6 wbsd mmc_core pcspkr rtc yenta_socket rsrc_nonstatic pcmcia_core ohci1394 snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_atmel tpm_nsc tpm shpchp pci_hotplug intel_agp agpgart dm_mod joydev tsdev evdev sr_mod sbp2 scsi_mod ieee1394 psmouse mousedev parport_pc lp parport md ext3 jbd thermal processor fan usbhid 8139too 8139cp mii ehci_hcd uhci_hcd usbcore ide_cd cdrom ide_disk ide_generic piix ide_core unix vesafb capability commoncap vga16fb vgastate softcursor cfbimgblt cfbfillrect cfbcopyarea fbcon tileblit font bitblit
[4294898.635000] CPU:    0
[4294898.635000] EIP:    0060:[<c00f0000>]    Not tainted VLI
[4294898.635000] EFLAGS: 00210086   (2.6.12-9-386)
[4294898.635000] EIP is at 0xc00f0000
[4294898.635000] eax: 00009610   ebx: 0000051c   ecx: dfe527d4   edx: dfe55990
[4294898.635000] esi: 000000c8   edi: dfdac989   ebp: dfe44400   esp: c82a1f3c
[4294898.635000] ds: 007b   es: 007b   ss: 0068
[4294898.635000] Process modprobe (pid: 8396, threadinfo=c82a0000 task=c8145560)[4294898.635000] Stack: dfe4f8b4 c82a1f7c dfe55990 c82a0000 c82a0000 c82a1f64 00000000 c82a1f7c
[4294898.635000]        00000000 c00f0000 00000000 c82a0000 dfe55990 c82a0000 dfe4fa93 c82a1f7c
[4294898.635000]        00009610 0000051c dfe527d4 dfe55990 dfdac989 000000c8 dfdadd3b dfdadd65
[4294898.635000] Call Trace:
[4294898.635000]  [<dfe4f8b4>] call_bios_52x+0x34/0x50 [acerhk]
[4294898.635000]  [<dfe4fa93>] get_cmos_index+0x1b/0x48 [acerhk]
[4294898.635000]  [<dfdac989>] setup_model_features+0x159/0x5bc [acerhk]
[4294898.635000]  [<dfdadd3b>] model_init+0xb/0x84 [acerhk]
[4294898.635000]  [<dfdadd65>] model_init+0x35/0x84 [acerhk]
[4294898.635000]  [<dfdadea7>] acerhk_init+0xf3/0x212 [acerhk]
[4294898.635000]  [<c0129682>] sys_init_module+0xb5/0x172
[4294898.635000]  [<c0102e9f>] sysenter_past_esp+0x54/0x75
[4294898.635000] Code: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff eb <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[4294898.635000]

perso@nc:/proc/driver/acerhk$ modeinfo acerhk
bash: modeinfo: command not found
perso@nc:/proc/driver/acerhk$ modinfo acerhk
filename:       /lib/modules/2.6.12-9-386/extra/acerhk.ko
author:         Olaf Tauber
description:    AcerHotkeys extra buttons keyboard driver
license:        GPL
vermagic:       2.6.12-9-386 386 gcc-3.4
depends:
srcversion:     E6C794A988E3CB12B6F920F
parm:           force_series:force laptop series, skip autodetection (uint)
parm:           verbose:output additional information (int)
parm:           usedritek:enable dritek keyboard extension (int)
parm:           autowlan:automatic switching of wlan hardware (int)
parm:           poll:start polling timer (int)

perso@nc:/proc/driver/acerhk$ modinfo ipw2200
filename:       /lib/modules/2.6.12-9-386/kernel/drivers/net/wireless/ipw2200.kodescription:    Intel(R) PRO/Wireless 2200/2915 Network Driver
version:        1.0.8
author:         Copyright(c) 2003-2005 Intel Corporation
license:        GPL
vermagic:       2.6.12-9-386 386 gcc-3.4
depends:        ieee80211,ieee80211_crypt,ieee80211,firmware_class
alias:          pci:v00008086d00001043sv00008086sd00002701bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002702bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002711bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002712bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002721bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002722bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002731bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002732bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002741bc*sc*i*
alias:          pci:v00008086d00001043sv0000103Csd00002741bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002742bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002751bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002752bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002753bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002754bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002761bc*sc*i*
alias:          pci:v00008086d00001043sv00008086sd00002762bc*sc*i*
alias:          pci:v00008086d0000104Fsv*sd*bc*sc*i*
alias:          pci:v00008086d00004220sv*sd*bc*sc*i*
alias:          pci:v00008086d00004221sv*sd*bc*sc*i*
alias:          pci:v00008086d00004223sv*sd*bc*sc*i*
alias:          pci:v00008086d00004224sv*sd*bc*sc*i*
srcversion:     1862474D22BC1FD125DE5FC
parm:           cmdlog:allocate a ring buffer for logging firmware commands (int)
parm:           hwcrypto:enable hardware crypto (default on) (int)
parm:           mode:network mode (0=BSS,1=IBSS,2=Monitor) (int)
parm:           channel:channel to limit associate to (default 0 [ANY]) (int)
parm:           debug:debug output mask (int)
parm:           led:enable led control on some systems (default 0 off)
(int)
parm:           auto_create:auto create adhoc network (default on) (int)
parm:           associate:auto associate when scanning (default on) (int)
parm:           disable:manually disable the radio (default 0 [radio on]) (int)


Bref, voilà bientôt près d'un an que je galère de forums en forums de bus en bugs, de mandriva à ubuntu hoary et maintenant breezy et toujours la galère ....

y a-t-il qq qui puisse vraiment m'aider et m'éviter de retourner sur Windows pour avoir accès au wifi ???

HELP ??



Pout mémo,
Xbook XB6 = Compla CL51A

@ +

Didier

#7 Le 02/11/2005, à 09:26

SkeRoy

Re : wifi via module ipW2200/acerhk kotkey ne fonctionne pas

http://forum.ubuntu-fr.org/viewtopic.php?id=13600 post #8 j'ai tous les détails de ce que je fais chez moi pour que ça marche.


== Debian Lenny == {Linux User #422949}

Hors ligne

Haut de page ↑