Pages : 1
#1 Le 02/12/2012, à 04:56
- docteurmaboul94
Bouton wifi inactif apres installation - Lubuntu
Bonjour à toutes et à tous,
je suis nouveau dans le monde de Linux.
je viens d'installer il y a deux heures pour la première fois Lubuntu sur un petit ordinateur portable.
Je rencontre le problème suivant pour l'instant, à savoir que j'ai un bouton sur lequel appuyer pour activer le wifi mais celui ci ne s allume pas.
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS"
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 5986:0101 Acer, Inc USB2.0 Camera
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
lspci
00:00.0 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge (rev 10)
00:00.1 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. CX700/VX700 RAID Controller
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Internal Module Bus
00:13.0 PCI bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700/VX700 [S3 UniChrome Pro] (rev 03)
02:01.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller (rev 10)
03:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
lspci -nn | grep -i net
03:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -k
00:00.0 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge (rev 10)
Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge
Kernel driver in use: agpgart-via
00:00.1 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
Kernel modules: shpchp
00:0f.0 IDE interface: VIA Technologies, Inc. CX700/VX700 RAID Controller
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: pata_via
Kernel modules: pata_via
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: uhci_hcd
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: uhci_hcd
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: uhci_hcd
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90)
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge
Subsystem: Packard Bell B.V. Device c201
Kernel modules: i2c-viapro
00:11.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Internal Module Bus
Subsystem: VIA Technologies, Inc. CX700/VX700 Internal Module Bus
00:13.0 PCI bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
Kernel modules: shpchp
00:13.1 PCI bridge: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge
Kernel modules: shpchp
01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700/VX700 [S3 UniChrome Pro] (rev 03)
Subsystem: Packard Bell B.V. Device c201
Kernel modules: viafb
02:01.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller (rev 10)
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
03:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Packard Bell B.V. Device c201
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
sudo lshw -C network
[sudo] password for benjamin:
PCI (sysfs)
*-network
description: Ethernet interface
produit: RTL-8139/8139C/8139C+
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 9
information bus: pci@0000:03:09.0
nom logique: eth0
version: 10
numéro de série: 00:14:0b:48:5a:dd
taille: 10Mbit/s
capacité: 100Mbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s
ressources: irq:16 portE/S:5000(taille=256) mémoire:d1100000-d11000ff
lsmod
Module Size Used by
via 45249 1
drm 197599 2 via
vesafb 13516 1
snd_hda_codec_via 46138 1
joydev 17393 0
snd_hda_intel 32765 1
snd_hda_codec 109562 2 snd_hda_codec_via,snd_hda_intel
snd_hwdep 13276 1 snd_hda_codec
snd_pcm 80845 2 snd_hda_intel,snd_hda_codec
snd_seq_midi 13132 0
snd_rawmidi 25424 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
snd_timer 28931 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 62064 11 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
uvcvideo 67203 0
videodev 86588 1 uvcvideo
psmouse 96684 0
soundcore 14635 1 snd
snd_page_alloc 14115 2 snd_hda_intel,snd_pcm
serio_raw 13027 0
i2c_viapro 12969 0
rfcomm 38139 0
parport_pc 32114 0
ppdev 12849 0
bnep 17830 2
bluetooth 158438 10 rfcomm,bnep
shpchp 32325 0
video 19068 0
mac_hid 13077 0
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
8139too 23283 0
ums_realtek 17920 0
8139cp 22633 0
uas 17828 0
pata_via 13428 2
usb_storage 39646 1 ums_realtek
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:0b:48:5a:dd
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:110 erreurs:0 :0 overruns:0 frame:0
TX packets:112 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:12312 (12.3 KB) Octets transmis:10158 (10.1 KB)
Interruption:16 Adresse de base:0x5000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:144 erreurs:0 :0 overruns:0 frame:0
TX packets:144 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:12336 (12.3 KB) Octets transmis:12336 (12.3 KB)
sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
uname -r -m
3.2.0-34-generic i686
cat /etc/network/interfaces
auto lo
iface lo inet loopback
nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: 8139too
State: unavailable
Default: no
HW Address: 00:14:0B:48:5A:DD
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: off
sudo rfkill list
Rien...
Merci beaucoup pour votre aide.
Amitiés
Doc.
Dernière modification par docteurmaboul94 (Le 02/12/2012, à 16:58)
Hors ligne
#2 Le 02/12/2012, à 11:43
- cracolinux
Re : Bouton wifi inactif apres installation - Lubuntu
Salut, c'est quoi ta machine ?
Je vois rien qui parle d'un périphérique wifi dans le rapport... tu avais un autre système sur cette machine avant ?
Hors ligne
#3 Le 02/12/2012, à 16:09
- docteurmaboul94
Re : Bouton wifi inactif apres installation - Lubuntu
Re,
cet ordinateur est un vieux netbook de Packard Bell Easynote XS
le modele en image :
http://www.google.fr/imgres?hl=fr&clien … ,s:0,i:102
voici une photo du bouton wifi :
Il y avait windows XP à l'origine dessus jusqu'à hier.
Vu que c'est une petite machine peu puissante, j'ai donc décidé de sauter le pas dans le monde de linux et d'y installer lubuntu.
Il n'y a à présent que Lubuntu installé dessus.
Doc.
Hors ligne
#4 Le 02/12/2012, à 17:36
- docteurmaboul94
Re : Bouton wifi inactif apres installation - Lubuntu
Petite information supplémentaire,
lorsque j'ai installé Lubuntu à la place de windows xp, le bonton wifi avait été laissé inactif ... ( car je ne l'utilisais pas la dernière fois sous xp pour économiser ma batterie )
je viens de lire que cela pouvait être un problème ....
Merci beaucoup pour votre aide.
doc
Dernière modification par docteurmaboul94 (Le 02/12/2012, à 17:52)
Hors ligne
#5 Le 02/12/2012, à 19:30
- cracolinux
Re : Bouton wifi inactif apres installation - Lubuntu
Est-ce que tu as un wifi actif lors d'une session autonome ? (avec un live-cd)
Hors ligne
#6 Le 02/12/2012, à 19:37
- docteurmaboul94
Re : Bouton wifi inactif apres installation - Lubuntu
Je dois partir dans 5 min. je teste ça en rentrant.
Hors ligne
#7 Le 02/12/2012, à 23:17
- docteurmaboul94
Re : Bouton wifi inactif apres installation - Lubuntu
Re,
je viens de tester avec le cd live .... et pas de wifi non plus ...
Hors ligne
#8 Le 04/12/2012, à 02:06
- docteurmaboul94
Re : Bouton wifi inactif apres installation - Lubuntu
j'ai retrouvé le nom de la carte wifi dans un manuel de démontage, c'est apparemment une RTL8187L
je continue à chercher..
Hors ligne
Pages : 1