Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".

#1 Le 02/12/2012, à 22:00

angus34

ecran et souri qui se bloque.

Bonsoir!
j'ai recupere un pc packard bell que mon frangin m'a file , et j'ai quelques soucis que je n'arrive pas a resoudre.
Au bout d'un certain temp d'utlisation j'ai l'ecran et la souri qui se bloquent , et plus rien a faire , sauf un redemarage a la sauvage!
Il a change la carte graphique ainsi ,que l'alimentation il y a peu de temp et depuis  il deconne!
Quelques infos si ça peut aider. j'ais essaye les solutions de quelques forums mais rien n'y a fait!
sudo lshw -C cpu
*-cpu:0                 
       description: CPU
       product: Intel(R) Pentium(R) D CPU 2.80GHz
       vendor: Intel Corp.
       physical id: 4
       bus info: cpu@0
       version: 15.6.4
       serial: 0000-0F64-0000-0000-0000-0000
       slot: Socket 775
       size: 2400MHz
       capacity: 4GHz
       width: 64 bits
       clock: 200MHz
       capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm cpufreq
       configuration: id=0
     *-logicalcpu:0
          description: Logical CPU
          physical id: 0.1
          width: 64 bits
          capabilities: logical
     *-logicalcpu:1
          description: Logical CPU
          physical id: 0.2
          width: 64 bits
          capabilities: logical
  *-cpu:1
       description: CPU
       vendor: Intel
       physical id: 5
       bus info: cpu@1
       version: 15.6.4
       serial: 0000-0F64-0000-0000-0000-0000
       slot: Socket 775
       size: 2400MHz
       capacity: 4GHz
       clock: 200MHz
       capabilities: ht cpufreq
       configuration: id=0
     *-logicalcpu:0
          description: Logical CPU
          physical id: 0.1
          capabilities: logical
     *-logicalcpu:1
          description: Logical CPU
          physical id: 0.2
          capabilities: logical

eric@nicococo-IMEDIA-MC-9116:~$ lspci -vnn | egrep "VGA|3D|Display"
    Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1)

merci d'avance.(ubuntu 10.04)


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#2 Le 03/12/2012, à 00:51

richardgilbert

Re : ecran et souri qui se bloque.

Je verrais du côté du kernel, voir si tous les équipements sont compatibles avec...


Debian, Ubuntu, Crunchbang, etc...

Hors ligne

#3 Le 03/12/2012, à 19:25

angus34

Re : ecran et souri qui se bloque.

salut richardclibert!
Qu'est ce tu entend par la?
Comment fait on?


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#4 Le 03/12/2012, à 20:26

angus34

Re : ecran et souri qui se bloque.

La carte graphique installee avant le remplacement de celle ci etait une ati , pour l'alim il a remi la meme!!


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#5 Le 03/12/2012, à 22:36

classdroogies

Re : ecran et souri qui se bloque.

Salut,
Quel version du pilote nvidia utilise tu.
Essaye de changer de version.
Comment as-tu procédés après le changement de la carte graphique, au niveau de l'installation/désinstallation du pilote graphique?

Dernière modification par classdroogies (Le 03/12/2012, à 22:41)

Hors ligne

#6 Le 03/12/2012, à 23:06

angus34

Re : ecran et souri qui se bloque.

salut.
je les ais tous essayes , mais aucuns n'ont resolu mon probleme!
Ce n'est pas moi qui ai change la carte.
Quand j'ai recupere ce pc , j'ai fait une reinstalation complete de ubuntu 12.04 , ensuite j'ai reinstalle la 10.04 mais le probleme a persiste!
Ne serait ce pas un probleme materiel ?


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#7 Le 03/12/2012, à 23:25

angus34

Re : ecran et souri qui se bloque.

par contre j'ai un autre packard bell avec cette config materielle , et il tourne tres bien!
*-cpu:0                 
       description: CPU
       product: Intel(R) Pentium(R) D CPU 3.00GHz
       vendor: Intel Corp.
       physical id: 4
       bus info: cpu@0
       version: 15.6.5
       serial: 0000-0F65-0000-0000-0000-0000
       slot: Socket 775
       size: 2400MHz
       capacity: 3GHz
       width: 64 bits
       clock: 200MHz
       capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm cpufreq
       configuration: id=1
     *-logicalcpu:0
          description: Logical CPU
          physical id: 1.1
          width: 64 bits
          capabilities: logical
     *-logicalcpu:1
          description: Logical CPU
          physical id: 1.2
          width: 64 bits
          capabilities: logical
  *-cpu:1
       physical id: 1
       bus info: cpu@1
       version: 15.6.5
       serial: 0000-0F65-0000-0000-0000-0000
       size: 2400MHz
       capacity: 2400MHz
       capabilities: ht cpufreq
       configuration: id=1
     *-logicalcpu:0
          description: Logical CPU
          physical id: 1.1
          capabilities: logical
     *-logicalcpu:1
          description: Logical CPU
          physical id: 1.2
          capabilities: logical
eric@eric-desktop:~$ lspci -vnn | egrep "VGA|3D|Display"
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72 [GeForce 7500 LE] [10de:01dd] (rev a1)


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#8 Le 03/12/2012, à 23:27

classdroogies

Re : ecran et souri qui se bloque.

angus34 a écrit :

Ne serait ce pas un probleme materiel ?

Sans doute...voici ce que je ferais :
Regarder les fichiers de log error, message, Xorg.....
Tester avec un live cd pour voir si le problème ce produit
Faire un test de mémoire
Faire un test de disque dur
Est-ce qu'au niveau des ventilations tout est ok, puisque le problème se produit au bout d'un certain temps, il y a peut etre un problème de refroidissement

Dernière modification par classdroogies (Le 03/12/2012, à 23:29)

Hors ligne

#9 Le 03/12/2012, à 23:39

angus34

Re : ecran et souri qui se bloque.

J'ai deja testé avec un live cd , fais un test de memoire et tester le dd tout parait ok!
Au niveau des ventilations ça a l'air bon aussi l! La carte graphique ne chauffe pas au dela de 54  57 °.
les ventilos tournent noremalement .

Dernière modification par angus34 (Le 03/12/2012, à 23:42)


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#10 Le 03/12/2012, à 23:49

classdroogies

Re : ecran et souri qui se bloque.

Reste les logs 
tu peux essayer également de fonctionner sans les pilotes nvidia avec le pilote libre nouveau pour voir si le problème ce produit.

Hors ligne

#11 Le 03/12/2012, à 23:52

angus34

Re : ecran et souri qui se bloque.

Je vais tester ça demain car le pc est debranché et la je dois partir !
merci je posterais la reponse demain!


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#12 Le 04/12/2012, à 22:10

angus34

Re : ecran et souri qui se bloque.

bon!!
J'ai fait le test avec le pilote libe nouveau , et le resultat est le meme!!!


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#13 Le 04/12/2012, à 22:17

classdroogies

Re : ecran et souri qui se bloque.

Et les logs t'as vérifié ?

Hors ligne

#14 Le 04/12/2012, à 22:39

angus34

Re : ecran et souri qui se bloque.

quelle comande stp? POUR VERIFIER SES LOGS!


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#15 Le 04/12/2012, à 22:55

classdroogies

Re : ecran et souri qui se bloque.

Doc Ubuntu ---> http://doc.ubuntu-fr.org/diagnostic_outil
Les fichiers de Log
Ce sont des fichiers situés dans le répertoire /var/log
Avec les commandes
    dmesg affiche les logs du système sur le matériel et périphérique, leur état de fonctionnement…
Avec une interface
    Système → Administration → Surveillance du système
ou
    Système → Administration → Visionneur de journaux système

Plus d'infos :
https://help.ubuntu.com/community/LinuxLogFiles

Hors ligne

#16 Le 04/12/2012, à 23:22

angus34

Re : ecran et souri qui se bloque.

Bon le pc a encore plante (ecran et souri) je reponds depuis mon autre pc , je reprendrais demain !
Encore merci de ton aide et de ton temp!


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#17 Le 05/12/2012, à 22:05

angus34

Re : ecran et souri qui se bloque.

re salut!
dmesg me donne.
[img][    0.196476] pci 0000:00:00.0: reg 14 32bit mmio:[0xfdfff000-0xfdffffff][    0.196491] pci 0000:00:00.0: reg 1c 64bit mmio:[0xe0000000-0xffffffff][    0.196621] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.196626] pci 0000:00:02.0: PME# disabled
[    0.196732] pci 0000:00:11.0: reg 10 io port:[0xff00-0xff07][    0.196744] pci 0000:00:11.0: reg 14 io port:[0xfe00-0xfe03][    0.196756] pci 0000:00:11.0: reg 18 io port:[0xfd00-0xfd07][    0.196767] pci 0000:00:11.0: reg 1c io port:[0xfc00-0xfc03][    0.196779] pci 0000:00:11.0: reg 20 io port:[0xfb00-0xfb0f][    0.196790] pci 0000:00:11.0: reg 24 32bit mmio:[0xfdffe000-0xfdffe1ff][    0.196803] pci 0000:00:11.0: reg 30 32bit mmio pref:[0x000000-0x07ffff][    0.196874] pci 0000:00:11.0: supports D1 D2
[    0.196957] pci 0000:00:12.0: reg 10 io port:[0xfa00-0xfa07][    0.196969] pci 0000:00:12.0: reg 14 io port:[0xf900-0xf903][    0.196981] pci 0000:00:12.0: reg 18 io port:[0xf800-0xf807][    0.196992] pci 0000:00:12.0: reg 1c io port:[0xf700-0xf703][    0.197004] pci 0000:00:12.0: reg 20 io port:[0xf600-0xf60f][    0.197016] pci 0000:00:12.0: reg 24 32bit mmio:[0xfdffd000-0xfdffd1ff][    0.197027] pci 0000:00:12.0: reg 30 32bit mmio pref:[0x000000-0x07ffff][    0.197098] pci 0000:00:12.0: supports D1 D2
[    0.197162] pci 0000:00:13.0: reg 10 32bit mmio:[0xfdffc000-0xfdffcfff][    0.197323] pci 0000:00:13.1: reg 10 32bit mmio:[0xfdffb000-0xfdffbfff][    0.197502] pci 0000:00:13.2: reg 10 32bit mmio:[0xfdffa000-0xfdffafff][    0.197620] pci 0000:00:13.2: supports D1 D2
[    0.197623] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.197630] pci 0000:00:13.2: PME# disabled
[    0.197684] pci 0000:00:14.0: reg 10 io port:[0x400-0x40f][    0.197696] pci 0000:00:14.0: reg 14 32bit mmio:[0xfdff9000-0xfdff93ff][    0.197747] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.197815] pci 0000:00:14.1: reg 10 io port:[0x00-0x07][    0.197828] pci 0000:00:14.1: reg 14 io port:[0x00-0x03][    0.197841] pci 0000:00:14.1: reg 18 io port:[0x00-0x07][    0.197852] pci 0000:00:14.1: reg 1c io port:[0x00-0x03][    0.197863] pci 0000:00:14.1: reg 20 io port:[0xf400-0xf40f][    0.198011] pci 0000:00:14.2: reg 10 64bit mmio:[0xfdff0000-0xfdff3fff][    0.198122] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.198129] pci 0000:00:14.2: PME# disabled
[    0.198380] pci 0000:01:00.0: reg 10 32bit mmio:[0xfa000000-0xfaffffff][    0.198395] pci 0000:01:00.0: reg 14 64bit mmio pref:[0xd0000000-0xdfffffff][    0.198409] pci 0000:01:00.0: reg 1c 64bit mmio:[0xf8000000-0xf9ffffff][    0.198418] pci 0000:01:00.0: reg 24 io port:[0xef00-0xef7f][    0.198427] pci 0000:01:00.0: reg 30 32bit mmio pref:[0x000000-0x07ffff][    0.198582] pci 0000:00:02.0: bridge io port:[0xe000-0xefff][    0.198588] pci 0000:00:02.0: bridge 32bit mmio:[0xf8000000-0xfbffffff][    0.198595] pci 0000:00:02.0: bridge 64bit mmio pref:[0xd0000000-0xdfffffff][    0.198672] pci 0000:02:01.0: reg 10 32bit mmio:[0xfddff000-0xfddff7ff][    0.198789] pci 0000:02:01.0: supports D1 D2
[    0.198865] pci 0000:02:05.0: reg 10 io port:[0xdc00-0xdcff][    0.198879] pci 0000:02:05.0: reg 14 32bit mmio:[0xfddfe000-0xfddfe0ff][    0.198988] pci 0000:02:05.0: supports D1 D2
[    0.198992] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[    0.198999] pci 0000:02:05.0: PME# disabled
[    0.199074] pci 0000:02:06.0: reg 10 32bit mmio:[0xfddfd000-0xfddfd7ff][    0.199087] pci 0000:02:06.0: reg 14 io port:[0xdf00-0xdf7f][    0.199198] pci 0000:02:06.0: supports D2
[    0.199200] pci 0000:02:06.0: PME# supported from D2 D3hot D3cold
[    0.199208] pci 0000:02:06.0: PME# disabled
[    0.199285] pci 0000:00:14.4: transparent bridge
[    0.199296] pci 0000:00:14.4: bridge io port:[0xd000-0xdfff][    0.199304] pci 0000:00:14.4: bridge 32bit mmio:[0xfdd00000-0xfddfffff][    0.199313] pci 0000:00:14.4: bridge 32bit mmio pref:[0xfde00000-0xfdefffff][    0.199332] pci_bus 0000:00: on NUMA node 0
[    0.199338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.199687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.199848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.206777] ACPI: PCI Interrupt Link[LNKA](IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.206925] ACPI: PCI Interrupt Link[LNKB](IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.207061] ACPI: PCI Interrupt Link[LNKC](IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.207198] ACPI: PCI Interrupt Link[LNKD](IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.207341] ACPI: PCI Interrupt Link[LNKE](IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.207475] ACPI: PCI Interrupt Link[LNKF](IRQs 3 4 *5 6 7 10 11)
[    0.207619] ACPI: PCI Interrupt Link[LNK0](IRQs 3 4 5 6 7 *10 11)
[    0.207752] ACPI: PCI Interrupt Link[LNK1](IRQs 3 4 5 6 7 10 *11)
[    0.207897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.207904] vgaarb: loaded
[    0.208092] SCSI subsystem initialized
[    0.208193] libata version 3.00 loaded.
[    0.208298] usbcore: registered new interface driver usbfs
[    0.208319] usbcore: registered new interface driver hub
[    0.208374] usbcore: registered new device driver usb
[    0.208571] ACPI: WMI: Mapper loaded
[    0.208574] PCI: Using ACPI for IRQ routing
[    0.208587] pci 0000:00:00.0: BAR 3: address space collision on of device[0xe0000000-0xffffffff][    0.208590] pci 0000:00:00.0: BAR 3: can't allocate resource
[    0.208809] NetLabel: Initializing
[    0.208813] NetLabel:  domain hash size = 128
[    0.208815] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.208833] NetLabel:  unlabeled traffic allowed by default
[    0.208907] Switching to clocksource tsc
[    0.211095] AppArmor: AppArmor Filesystem Enabled
[    0.211110] pnp: PnP ACPI init
[    0.211127] ACPI: bus type pnp registered
[    0.213226] pnp 00:09: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.213232] pnp 00:09: mem resource (0xd5000-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.213237] pnp 00:09: mem resource (0xf0000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.213242] pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.213247] pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.213251] pnp 00:09: mem resource (0x100000-0x7feeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.213336] pnp: PnP ACPI: found 10 devices
[    0.213339] ACPI: ACPI bus type pnp unregistered
[    0.213345] PnPBIOS: Disabled by ACPI PNP
[    0.213359] system 00:01: ioport range 0x140-0x15f has been reserved
[    0.213363] system 00:01: ioport range 0x228-0x22f has been reserved
[    0.213367] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[    0.213371] system 00:01: ioport range 0xc00-0xc01 has been reserved
[    0.213374] system 00:01: ioport range 0xc14-0xc14 has been reserved
[    0.213378] system 00:01: ioport range 0xc50-0xc52 has been reserved
[    0.213382] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[    0.213385] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[    0.213389] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[    0.213393] system 00:01: ioport range 0x4000-0x40fe has been reserved
[    0.213397] system 00:01: ioport range 0x4210-0x4217 has been reserved
[    0.213408] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.213412] system 00:06: ioport range 0x220-0x225 has been reserved
[    0.213416] system 00:06: ioport range 0x880-0x88f has been reserved
[    0.213425] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[    0.213436] system 00:09: iomem range 0x7ff00000-0x7fffffff could not be reserved
[    0.213440] system 00:09: iomem range 0x7fef0000-0x7fefffff could not be reserved
[    0.213444] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
[    0.213449] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.213453] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.213457] system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved
[    0.248277] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    0.248282] pci 0000:00:02.0:   IO window: 0xe000-0xefff
[    0.248288] pci 0000:00:02.0:   MEM window: 0xf8000000-0xfbffffff
[    0.248293] pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.248301] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[    0.248306] pci 0000:00:14.4:   IO window: 0xd000-0xdfff
[    0.248315] pci 0000:00:14.4:   MEM window: 0xfdd00000-0xfddfffff
[    0.248322] pci 0000:00:14.4:   PREFETCH window: 0xfde00000-0xfdefffff
[    0.248344] pci 0000:00:02.0: setting latency timer to 64
[    0.248358] pci_bus 0000:00: resource 0 io:[0x00-0xffff][    0.248362] pci_bus 0000:00: resource 1 mem:[0x000000-0xffffffff][    0.248365] pci_bus 0000:01: resource 0 io:[0xe000-0xefff][    0.248369] pci_bus 0000:01: resource 1 mem:[0xf8000000-0xfbffffff][    0.248372] pci_bus 0000:01: resource 2 pref mem[0xd0000000-0xdfffffff][    0.248376] pci_bus 0000:02: resource 0 io:[0xd000-0xdfff][    0.248380] pci_bus 0000:02: resource 1 mem:[0xfdd00000-0xfddfffff][    0.248383] pci_bus 0000:02: resource 2 pref mem[0xfde00000-0xfdefffff][    0.248387] pci_bus 0000:02: resource 3 io:[0x00-0xffff][    0.248390] pci_bus 0000:02: resource 4 mem:[0x000000-0xffffffff][    0.248441] NET: Registered protocol family 2
[    0.248583] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.249122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.249883] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.250249] TCP: Hash tables configured (established 131072 bind 65536)
[    0.250253] TCP reno registered
[    0.250366] NET: Registered protocol family 1
[    0.250386] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.250415]   alloc irq_desc for 19 on node -1
[    0.250418]   alloc kstat_irqs on node -1
[    0.250429] pci 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.278928] pci 0000:00:13.0: PCI INT A disabled
[    0.278940] pci 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.306953] pci 0000:00:13.1: PCI INT A disabled
[    0.306971] pci 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.473460] Freeing initrd memory: 7827k freed
[    1.904017] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    1.904036] pci 0000:00:13.2: PCI INT A disabled
[    1.904055] pci 0000:01:00.0: Boot video device
[    1.904323] cpufreq-nforce2: No nForce2 chipset.
[    1.904364] Scanning for low memory corruption every 60 seconds
[    1.904511] audit: initializing netlink socket (disabled)
[    1.904527] type=2000 audit(1354736742.712:1): initialized
[    1.914291] highmem bounce pool size: 64 pages
[    1.914302] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.916586] VFS: Disk quotas dquot_6.5.2
[    1.916678] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.917576] fuse init (API version 7.13)
[    1.917709] msgmni has been set to 1705
[    1.918140] alg: No test for stdrng (krng)
[    1.918240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.918245] io scheduler noop registered
[    1.918248] io scheduler anticipatory registered
[    1.918251] io scheduler deadline registered
[    1.918312] io scheduler cfq registered (default)
[    1.918484] pcieport 0000:00:02.0: setting latency timer to 64
[    1.918566] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.918612] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.918745] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.918751] ACPI: Power Button[PWRB][    1.918837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.918841] ACPI: Power Button[PWRF][    1.919209] processor LNXCPU:00: registered as cooling_device0
[    1.919495] ACPI: SSDT 7fef6640 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    1.919815] processor LNXCPU:01: registered as cooling_device1
[    1.921541] isapnp: Scanning for PnP cards...
[    1.923587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.925525] brd: module loaded
[    1.926223] loop: module loaded
[    1.926348] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.926596]   alloc irq_desc for 23 on node -1
[    1.926600]   alloc kstat_irqs on node -1
[    1.926612] pata_acpi 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.926704]   alloc irq_desc for 22 on node -1
[    1.926707]   alloc kstat_irqs on node -1
[    1.926714] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.926764]   alloc irq_desc for 16 on node -1
[    1.926767]   alloc kstat_irqs on node -1
[    1.926774] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.927273] Fixed MDIO Bus: probed
[    1.927324] PPP generic driver version 2.4.2
[    1.927381] tun: Universal TUN/TAP device driver, 1.6
[    1.927385] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.927509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.927530] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.927558] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.927605] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    1.927687] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfdffa000
[    1.937017] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.937166] usb usb1: configuration #1 chosen from 1 choice
[    1.937209] hub 1-0:1.0: USB hub found
[    1.937222] hub 1-0:1.0: 8 ports detected
[    1.937328] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.937347] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.937363] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.937414] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.937436] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfdffc000
[    1.997103] usb usb2: configuration #1 chosen from 1 choice
[    1.997145] hub 2-0:1.0: USB hub found
[    1.997160] hub 2-0:1.0: 4 ports detected
[    1.997235] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.997252] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.997297] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.997318] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfdffb000
[    2.057104] usb usb3: configuration #1 chosen from 1 choice
[    2.057142] hub 3-0:1.0: USB hub found
[    2.057159] hub 3-0:1.0: 4 ports detected
[    2.057239] uhci_hcd: USB Universal Host Controller Interface driver
[    2.057331] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.057334] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.057529] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.057653] mice: PS/2 mouse device common for all mice
[    2.057803] rtc_cmos 00:03: RTC can wake from S4
[    2.057853] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.057889] rtc0: alarms up to one month, 242 bytes nvram
[    2.058045] device-mapper: uevent: version 1.0.3
[    2.058250] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.058367] device-mapper: multipath: version 1.1.0 loaded
[    2.058372] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.058537] EISA: Probing bus 0 at eisa.0
[    2.058562] Cannot allocate resource for EISA slot 4
[    2.058586] EISA: Detected 0 cards.
[    2.058693] cpuidle: using governor ladder
[    2.058697] cpuidle: using governor menu
[    2.059354] TCP cubic registered
[    2.059550] NET: Registered protocol family 10
[    2.060735] NET: Registered protocol family 17
[    2.061958] Using IPI No-Shortcut mode
[    2.062062] PM: Resume from disk failed.
[    2.062088] registered taskstats version 1
[    2.062547]   Magic number: 8:663:798
[    2.062635] rtc_cmos 00:03: setting system clock to 2012-12-05 19:45:43 UTC (1354736743)
[    2.062641] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.062643] EDD information not available.
[    2.077477] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.276746] isapnp: No Plug & Play device found
[    2.276795] Freeing unused kernel memory: 664k freed
[    2.277529] Write protecting the kernel text: 4704k
[    2.277595] Write protecting the kernel read-only data: 1848k
[    2.303625] udev: starting version 151
[    2.438784] scsi0 : pata_atiixp
[    2.439088] scsi1 : pata_atiixp
[    2.440498] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[    2.440503] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[    2.440742] sata_sil 0000:00:11.0: version 2.4
[    2.441100] scsi2 : sata_sil
[    2.441413] scsi3 : sata_sil
[    2.441474] ata3: SATA max UDMA/100 mmio m512@0xfdffe000 tf 0xfdffe080 irq 23
[    2.441480] ata4: SATA max UDMA/100 mmio m512@0xfdffe000 tf 0xfdffe0c0 irq 23
[    2.441827] scsi4 : sata_sil
[    2.441974] scsi5 : sata_sil
[    2.442032] ata5: SATA max UDMA/100 mmio m512@0xfdffd000 tf 0xfdffd080 irq 22
[    2.442038] ata6: SATA max UDMA/100 mmio m512@0xfdffd000 tf 0xfdffd0c0 irq 22
[    2.442460] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.442482] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.604837] ata1.00: ATAPI: PHILIPS DVD8801, NW02, max UDMA/33
[    2.620804] ata1.00: configured for UDMA/33
[    2.623666] scsi 0:0:0:0: CD-ROM            PHILIPS  DVD8801          NW02 PQ: 0 ANSI: 5
[    2.631928] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.631934] Uniform CD-ROM driver Revision: 3.20
[    2.632107] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.632208] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.756020] usb 2-3: new low speed USB device using ohci_hcd and address 2
[    2.761056] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    2.761157] ata3: SATA link down (SStatus 0 SControl 310)
[    2.808729] ata5.00: ATA-7: ST3300822AS, 3.AAE, max UDMA/133
[    2.808735] ata5.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.875386] ata5.00: configured for UDMA/100
[    2.964200] usb 2-3: configuration #1 chosen from 1 choice
[    3.104036] ata4: SATA link down (SStatus 0 SControl 310)
[    3.104227] scsi 4:0:0:0: Direct-Access     ATA      ST3300822AS      3.AA PQ: 0 ANSI: 5
[    3.104484] sd 4:0:0:0:[sda]586072368 512-byte logical blocks: (300 GB/279 GiB)
[    3.104502] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.104615] sd 4:0:0:0:[sda]Write Protect is off
[    3.104619] sd 4:0:0:0:[sda]Mode Sense: 00 3a 00 00
[    3.104661] sd 4:0:0:0:[sda]Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.104904]  sda: sda1 sda2 < sda5 >
[    3.141704] sd 4:0:0:0:[sda]Attached SCSI disk
[    3.268022] usb 3-2: new full speed USB device using ohci_hcd and address 2
[    3.424036] ata6: SATA link down (SStatus 0 SControl 310)
[    3.429211] ohci1394 0000:02:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    3.439899] usbcore: registered new interface driver hiddev
[    3.439979] 8139too Fast Ethernet driver 0.9.28
[    3.449494] input: HID 04d9:048e as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.0/input/input4
[    3.449642] generic-usb 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:13.0-3/input0
[    3.449679] usbcore: registered new interface driver usbhid
[    3.449683] usbhid: v2.6:USB HID core driver
[    3.481233] usb 3-2: configuration #1 chosen from 1 choice
[    3.487054] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]MMIO=[fddfd000-fddfd7ff]Max Packet=[1024]IR/IT contexts=[4/8][    3.492220] 8139too 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    3.492768] Initializing USB Mass Storage driver...
[    3.492910] scsi6 : SCSI emulation for USB Mass Storage devices
[    3.493104] usbcore: registered new interface driver usb-storage
[    3.493108] USB Mass Storage support registered.
[    3.493567] usb-storage: device found at 2
[    3.493570] usb-storage: waiting for device to settle before scanning
[    3.494252] eth0: RealTek RTL8139 at 0xdc00, 00:16:e6:13:a3:13, IRQ 21
[    3.746723] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.772039] usb 3-3: new full speed USB device using ohci_hcd and address 3
[    3.964290] usb 3-3: configuration #1 chosen from 1 choice
[    4.764247] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000016e600c0c1fc][    8.492451] usb-storage: device scan complete
[    8.498385] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    8.504381] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    8.510379] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    8.516366] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    8.517275] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    8.517525] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    8.517758] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    8.518006] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    8.566366] sd 6:0:0:0:[sdb]Attached SCSI removable disk
[    8.576347] sd 6:0:0:1:[sdc]Attached SCSI removable disk
[    8.586357] sd 6:0:0:2:[sdd]Attached SCSI removable disk
[    8.596434] sd 6:0:0:3:[sde]Attached SCSI removable disk
[   13.815340] Adding 6034424k swap on /dev/sda5.  Priority:-1 extents:1 across:6034424k
[   13.833250] udev: starting version 151
[   13.914160] lp: driver loaded but no devices found
[   13.929309] vga16fb: initializing
[   13.929317] vga16fb: mapped to 0xc00a0000
[   13.929465] fb0: VGA16 VGA frame buffer device
[   13.929737] Linux agpgart interface v0.103
[   13.966875] agpgart-ati 0000:00:00.0: unsupported Ati chipset[1002/5a33])
[   13.967351] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[   14.104460] Linux video capture interface: v2.00
[   14.308650] type=1505 audit(1354736755.505:2):  operation="profile_load" pid=565 name="/sbin/dhclient3"
[   14.309430] type=1505 audit(1354736755.505:3):  operation="profile_load" pid=565 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.309861] type=1505 audit(1354736755.505:4):  operation="profile_load" pid=565 name="/usr/lib/connman/scripts/dhclient-script"
[   14.311848] type=1505 audit(1354736755.505:5):  operation="profile_replace" pid=575 name="/sbin/dhclient3"
[   14.312660] type=1505 audit(1354736755.505:6):  operation="profile_replace" pid=575 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.313093] type=1505 audit(1354736755.505:7):  operation="profile_replace" pid=575 name="/usr/lib/connman/scripts/dhclient-script"
[   14.701192] nvidia: module license 'NVIDIA' taints kernel.
[   14.701200] Disabling lock debugging due to kernel taint
[   14.831919] type=1505 audit(1354736756.006:8):  operation="profile_replace" pid=674 name="/sbin/dhclient3"
[   14.837416] type=1505 audit(1354736756.006:9):  operation="profile_load" pid=673 name="/usr/share/gdm/guest-session/Xsession"
[   14.838290] type=1505 audit(1354736756.006:10):  operation="profile_replace" pid=674 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.838737] type=1505 audit(1354736756.006:11):  operation="profile_replace" pid=674 name="/usr/lib/connman/scripts/dhclient-script"
[   14.982050] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   15.222805]   alloc irq_desc for 18 on node -1
[   15.222810]   alloc kstat_irqs on node -1
[   15.222821] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   15.222832] nvidia 0000:01:00.0: setting latency timer to 64
[   15.222840] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.224477] gspca: main v2.7.0 registered
[   15.225374] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.64  Tue Oct 30 11:09:29 PDT 2012
[   15.225498] gspca: probing 06f8:3008
[   15.235510] sonixj: Sonix chip id: 11
[   15.268403] ppdev: user-space parallel port driver
[   15.274610] saa7130/34: v4l2 driver version 0.2.15 loaded
[   15.274687] saa7134 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   15.274701] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 23, latency: 64, mmio: 0xfddff000
[   15.274714] saa7133[0]: subsystem: 1043:4857, board: Asus Tiger Rev:1.00[card=152,autodetected][   15.274745] saa7133[0]: board init: gpio is 0
[   15.274759] IRQ 23/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   15.287162] gspca: probe ok
[   15.287182] gspca: probing 06f8:3008
[   15.287197] gspca: probing 06f8:3008
[   15.287224] usbcore: registered new interface driver sonixj
[   15.287228] sonixj: registered
[   15.449377] Console: switching to colour frame buffer device 80x30
[   15.458917] saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   15.458938] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   15.458956] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b6 ff ff ff ff
[   15.458975] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.458992] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
[   15.459009] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459026] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459043] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459061] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459078] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459095] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459113] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459130] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459147] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459164] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459181] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.459203] i2c i2c-1: Invalid 7-bit address 0x7a
[   15.459464] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.515240] usbcore: registered new interface driver snd-usb-audio
[   15.553797] hda_codec: ALC880: BIOS auto-probing.
[   15.555707] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[   15.557298] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[   15.637056] tda829x 1-004b: setting tuner address to 61
[   15.709025] tda829x 1-004b: type set to tda8290+75a
[   19.605293] saa7133[0]: registered device video1[v4l2][   19.605421] saa7133[0]: registered device vbi0
[   19.605544] saa7133[0]: registered device radio0
[   19.614419] saa7134 ALSA driver for DMA sound loaded
[   19.614438] IRQ 23/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   19.614471] saa7133[0]/alsa: saa7133[0]at 0xfddff000 irq 23 registered as card -2
[   19.659847] dvb_init() allocating 1 frontend
[   19.753168] DVB: registering new adapter (saa7133[0])
[   19.753174] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   20.044021] tda1004x: setting up plls for 48MHz sampling clock
[   22.436013] tda1004x: timeout waiting for DSP ready
[   22.476017] tda1004x: found firmware revision 0 -- invalid
[   22.476022] tda1004x: trying to boot from eeprom
[   24.812017] tda1004x: timeout waiting for DSP ready
[   24.852017] tda1004x: found firmware revision 0 -- invalid
[   24.852022] tda1004x: waiting for firmware upload...
[   24.852031] saa7134 0000:02:01.0: firmware: requesting dvb-fe-tda10046.fw
[   24.873820] saa7134 0000:02:01.0: firmware: requesting dvb-fe-tda10045.fw
[   24.879803] tda1004x: no firmware upload (timeout or file not found?)
[   24.880119] tda1004x: firmware upload failed
[   25.752015] eth0: no IPv6 routers present
[  430.626930] __ratelimit: 18 callbacks suppressed
[  430.626936] type=1505 audit(1354737168.586:18):  operation="profile_replace" pid=3894 name="/usr/lib/cups/backend/cups-pdf"
[  430.629923] type=1505 audit(1354737168.586:19):  operation="profile_replace" pid=3894 name="/usr/sbin/cupsd"
eric@nicococo-IMEDIA-MC-9116:~$[/img]


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

#18 Le 05/12/2012, à 23:15

classdroogies

Re : ecran et souri qui se bloque.

Salut,
Poste ce genre de donnée entre les balises code < > plutot qu'entre les balises img ça évite les post ultra long wink

La seule chose que je vois (mais je ne suis pas non plus un expert) c'est :

[    1.904017] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001

Qui d'après ce que j'ai pu lire provoque un démarrage lent....rien à voir avec ton soucis donc....

https://bugzilla.kernel.org/show_bug.cgi?id=12148

et un problème au niveau de ta carte tuner :

[   19.753168] DVB: registering new adapter (saa7133[0])
[   19.753174] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   20.044021] tda1004x: setting up plls for 48MHz sampling clock
[   22.436013] tda1004x: timeout waiting for DSP ready
[   22.476017] tda1004x: found firmware revision 0 -- invalid
[   22.476022] tda1004x: trying to boot from eeprom
[   24.812017] tda1004x: timeout waiting for DSP ready
[   24.852017] tda1004x: found firmware revision 0 -- invalid
[   24.852022] tda1004x: waiting for firmware upload...
[   24.852031] saa7134 0000:02:01.0: firmware: requesting dvb-fe-tda10046.fw
[   24.873820] saa7134 0000:02:01.0: firmware: requesting dvb-fe-tda10045.fw
[   24.879803] tda1004x: no firmware upload (timeout or file not found?)
[   24.880119] tda1004x: firmware upload failed

Pour allez plus loin as-tu lu :
http://doc.ubuntu-fr.org/tutoriel/lorsq … steme_gele
Et en anglais :
https://help.ubuntu.com/community/DebuggingSystemCrash

As-tu lu les fichiers situés dans /var/log/ pour voir si tu ne vois pas de message d'erreur ?

Dernière modification par classdroogies (Le 05/12/2012, à 23:16)

Hors ligne

#19 Le 05/12/2012, à 23:47

angus34

Re : ecran et souri qui se bloque.

Salut classdroogies.
Oui je l'ai lu( http://doc.ubuntu-fr.org/tutoriel/lorsq … steme_gele ) et les fichiers dans var/log/ aussi , mais comme je ne suis pas un specialiste aussi je n'ai rien vu d'annormal!( enfin pour moi )
Je pense que je vais l'amener chez un reparateur et on verra bien ce qu'il me dira!
merci encore pour ton aide!!!


UBUNTU 10.04
UBUNTU 12.04
I'm on the highway to hell!!!
De ses erreurs on apprend a ne pas les refaire sinon!!!!!

Hors ligne

Haut de page ↑