Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/01/2013, à 14:19

fredthefrenchy

[RESOLU] : Clavier non reconnu et plus de réseau filairex

Bonjour,

Impossible de me connecter à Ubuntu, sur l'écran de login (gdm je suppose), le clavier et la souris ne réagissent pas.
Le clavier et la souris réagissent au boot ( grub2, je peux changer de ligne).
Ils fonctionnent aussi sous W7 sur le même PC.
C'est un clavier souris Logitec MX330 USB Sans fil.
Je ne comprends pas pourquoi d'un seul coup cela ne marche plus, ils marchaient il y a 2 semaines avec Ubuntu (12.10) ....

Une idée ?

Dernière modification par fredthefrenchy (Le 12/01/2013, à 06:38)


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#2 Le 09/01/2013, à 22:09

Mick4139

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

Bonsoir.
Sur quelle version d'ubuntu tourne ton pc? Sinon il y a un problème de compatibilité. Ubuntu 12.10 est une version encore instable tu peut utiliser la version 12.04 LTS qui est une version stable et ensuite migrer vers la 12.10 dès que la version stable seras sortie. Pour t'aider maintenant essai de brancher ton clavier et ta souris après le démarrage d'ubuntu sa peu fonctionner moi j'avais déjà fait ça sur l'ordi d'une amie.
En espérant que tu trouve une solution.
Bonne soirée

Hors ligne

#3 Le 10/01/2013, à 10:08

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

J'ai essayé de débrancher et rebrancher le clavier. J'ai même essayer de mettre un clavier USB filaire sans aucun résultat.
Je me suis rendu compte aussi que le réseau filaire ne fonctionnait plus : Réseau filaire 1 désactivé !!!
Je ne comprends pas pourquoi d'un seul coup ça fasse ça ! Ça marchait très bien y a quelques semaines (avant Noël) !
Je suis bien en 12.10 installé à partir d'une 12.04 LTS clean.

Dernière modification par fredthefrenchy (Le 10/01/2013, à 10:28)


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#4 Le 10/01/2013, à 15:19

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

mon dernier dmesg : (merci Ext2fsd sous W7)

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-21-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 (Ubuntu 3.5.0-21.32-generic 3.5.7.1)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=eebfa15a-3dbe-4ca9-9ff5-58233da93533 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ceec9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ceeca000-0x00000000cef52fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cef53000-0x00000000cf033fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf034000-0x00000000cf03bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cf03c000-0x00000000cf2a1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2a2000-0x00000000cf2a2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf2a3000-0x00000000cf2b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2b3000-0x00000000cf2b3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf2b4000-0x00000000cf2b4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf2b5000-0x00000000cf2c0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf2c1000-0x00000000cf2e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2e8000-0x00000000cf4eafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf4eb000-0x00000000cf779fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf77a000-0x00000000cfeebfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfeec000-0x00000000cfefffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000042effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: MSI MS-7640/990FXA-GD80 (MS-7640), BIOS V11.13 10/09/2012
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000042f000000 aka 17136M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] total RAM covered: 3327M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fceb0-0x000fcebf] mapped at [ffff8800000fceb0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0xcfefffff]
[    0.000000]  [mem 0x00000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcfefffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xcfefffff @ [mem 0x1fffd000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100001000-0x42effffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x13fffffff] page 2M
[    0.000000]  [mem 0x140000000-0x3ffffffff] page 1G
[    0.000000]  [mem 0x400000000-0x42effffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x42effffff @ [mem 0xcfefc000-0xcfefffff]
[    0.000000] RAMDISK: [mem 0x3542c000-0x36a0dfff]
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cf034068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cf03ace0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
[    0.000000] ACPI: DSDT 00000000cf034150 06B8B (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cf2bbf80 00040
[    0.000000] ACPI: APIC 00000000cf03add8 0009E (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000cf03ae78 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000cf03aeb8 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 00000000cf03aef0 00D3C (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: BGRT 00000000cf03bc30 0003C (v00 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000042effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x42effffff]
[    0.000000]   NODE_DATA [mem 0x42effc000-0x42effffff]
[    0.000000]  [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x42effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xceec9fff]
[    0.000000]   node   0: [mem 0xcf2a2000-0xcf2a2fff]
[    0.000000]   node   0: [mem 0xcf2b4000-0xcf2b4fff]
[    0.000000]   node   0: [mem 0xcf4eb000-0xcf779fff]
[    0.000000]   node   0: [mem 0xcfeec000-0xcfefffff]
[    0.000000]   node   0: [mem 0x100001000-0x42effffff]
[    0.000000] On node 0 totalpages: 4186363
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3911 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 827823 pages, LIFO batch:31
[    0.000000]   Normal zone: 52160 pages used for memmap
[    0.000000]   Normal zone: 3286079 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 72
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000ceeca000 - 00000000cef53000
[    0.000000] PM: Registered nosave memory: 00000000cef53000 - 00000000cf034000
[    0.000000] PM: Registered nosave memory: 00000000cf034000 - 00000000cf03c000
[    0.000000] PM: Registered nosave memory: 00000000cf03c000 - 00000000cf2a2000
[    0.000000] PM: Registered nosave memory: 00000000cf2a3000 - 00000000cf2b3000
[    0.000000] PM: Registered nosave memory: 00000000cf2b3000 - 00000000cf2b4000
[    0.000000] PM: Registered nosave memory: 00000000cf2b5000 - 00000000cf2c1000
[    0.000000] PM: Registered nosave memory: 00000000cf2c1000 - 00000000cf2e8000
[    0.000000] PM: Registered nosave memory: 00000000cf2e8000 - 00000000cf4eb000
[    0.000000] PM: Registered nosave memory: 00000000cf77a000 - 00000000cfeec000
[    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
[    0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
[    0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[    0.000000] e820: [mem 0xcff00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042ec00000 s83584 r8192 d22912 u262144
[    0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4117813
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=eebfa15a-3dbe-4ca9-9ff5-58233da93533 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f8000000 size 64 MB
[    0.000000] Memory: 16378084k/17547264k available (6718k kernel code, 801812k absent, 367368k reserved, 6452k data, 932k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:1288 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 3600.079 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.15 BogoMIPS (lpj=14400316)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000026] Security Framework initialized
[    0.000035] AppArmor: AppArmor initialized
[    0.000036] Yama: becoming mindful.
[    0.000985] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.004629] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.006202] Mount-cache hash table entries: 256
[    0.006353] Initializing cgroup subsys cpuacct
[    0.006355] Initializing cgroup subsys memory
[    0.006363] Initializing cgroup subsys devices
[    0.006364] Initializing cgroup subsys freezer
[    0.006365] Initializing cgroup subsys blkio
[    0.006366] Initializing cgroup subsys perf_event
[    0.006385] tseg: 00cff00000
[    0.006386] CPU: Physical Processor ID: 0
[    0.006387] CPU: Processor Core ID: 0
[    0.006388] mce: CPU supports 7 MCE banks
[    0.006394] LVT offset 1 assigned for vector 0xf9
[    0.007674] ACPI: Core revision 20120320
[    0.034189] ftrace: allocating 25138 entries in 99 pages
[    0.043445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083069] CPU0: AMD FX(tm)-8150 Eight-Core Processor            stepping 02
[    0.189887] Performance Events: AMD Family 15h PMU driver.
[    0.189890] ... version:                0
[    0.189891] ... bit width:              48
[    0.189892] ... generic registers:      6
[    0.189893] ... value mask:             0000ffffffffffff
[    0.189893] ... max period:             00007fffffffffff
[    0.189894] ... fixed-purpose events:   0
[    0.189895] ... event mask:             000000000000003f
[    0.189997] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.190088] Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
[    0.281941] Brought up 8 CPUs
[    0.281944] Total of 8 processors activated (57601.26 BogoMIPS).
[    0.294357] devtmpfs: initialized
[    0.296199] EVM: security.selinux
[    0.296200] EVM: security.SMACK64
[    0.296201] EVM: security.capability
[    0.296254] PM: Registering ACPI NVS region [mem 0xceeca000-0xcef52fff] (561152 bytes)
[    0.296263] PM: Registering ACPI NVS region [mem 0xcf2b3000-0xcf2b3fff] (4096 bytes)
[    0.296265] PM: Registering ACPI NVS region [mem 0xcf2b5000-0xcf2c0fff] (49152 bytes)
[    0.296266] PM: Registering ACPI NVS region [mem 0xcf2e8000-0xcf4eafff] (2109440 bytes)
[    0.296919] dummy: 
[    0.296943] RTC time:  7:42:27, date: 01/10/13
[    0.296975] NET: Registered protocol family 16
[    0.297088] Trying to unpack rootfs image as initramfs...
[    0.297164] ACPI: bus type pci registered
[    0.297208] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.297210] PCI: not using MMCONFIG
[    0.297211] PCI: Using configuration type 1 for base access
[    0.297212] PCI: Using configuration type 1 for extended access
[    0.298278] bio: create slab <bio-0> at 0
[    0.298355] ACPI: Added _OSI(Module Device)
[    0.298356] ACPI: Added _OSI(Processor Device)
[    0.298357] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.298358] ACPI: Added _OSI(Processor Aggregator Device)
[    0.299414] ACPI: EC: Look up EC in DSDT
[    0.300600] ACPI: Executed 2 blocks of module-level executable AML code
[    0.330066] ACPI: Interpreter enabled
[    0.330069] ACPI: (supports S0 S1 S3 S4 S5)
[    0.330087] ACPI: Using IOAPIC for interrupt routing
[    0.330224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.330260] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.380308] ACPI: No dock devices found.
[    0.380311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.380485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.380716] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
[    0.380718] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
[    0.380720] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
[    0.380721] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.380723] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.380724] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.380726] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[    0.380750] PCI host bridge to bus 0000:00
[    0.380752] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.380753] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.380755] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.380756] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.380758] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.380759] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.380761] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[    0.380773] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.380844] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.380883] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.380899] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.380936] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.380950] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.380987] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.381002] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    0.381038] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.381053] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[    0.381090] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.381117] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.381134] pci 0000:00:11.0: reg 10: [io  0xf040-0xf047]
[    0.381142] pci 0000:00:11.0: reg 14: [io  0xf030-0xf033]
[    0.381150] pci 0000:00:11.0: reg 18: [io  0xf020-0xf027]
[    0.381158] pci 0000:00:11.0: reg 1c: [io  0xf010-0xf013]
[    0.381165] pci 0000:00:11.0: reg 20: [io  0xf000-0xf00f]
[    0.381173] pci 0000:00:11.0: reg 24: [mem 0xfe50b000-0xfe50b3ff]
[    0.381223] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.381234] pci 0000:00:12.0: reg 10: [mem 0xfe50a000-0xfe50afff]
[    0.381294] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.381309] pci 0000:00:12.2: reg 10: [mem 0xfe509000-0xfe5090ff]
[    0.381378] pci 0000:00:12.2: supports D1 D2
[    0.381379] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.381400] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.381411] pci 0000:00:13.0: reg 10: [mem 0xfe508000-0xfe508fff]
[    0.381471] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.381486] pci 0000:00:13.2: reg 10: [mem 0xfe507000-0xfe5070ff]
[    0.381555] pci 0000:00:13.2: supports D1 D2
[    0.381556] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.381576] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.381645] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.381662] pci 0000:00:14.2: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[    0.381718] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.381730] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.381794] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.381828] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.381839] pci 0000:00:14.5: reg 10: [mem 0xfe506000-0xfe506fff]
[    0.381899] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.381962] pci 0000:00:15.0: supports D1 D2
[    0.381985] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.382047] pci 0000:00:15.1: supports D1 D2
[    0.382070] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.382081] pci 0000:00:16.0: reg 10: [mem 0xfe505000-0xfe505fff]
[    0.382141] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.382156] pci 0000:00:16.2: reg 10: [mem 0xfe504000-0xfe5040ff]
[    0.382226] pci 0000:00:16.2: supports D1 D2
[    0.382228] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.382246] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.382264] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.382277] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.382291] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.382308] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.382323] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.382378] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[    0.382389] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff]
[    0.382400] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.382411] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
[    0.382419] pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
[    0.382426] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
[    0.382491] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[    0.382501] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
[    0.389603] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.389608] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.389610] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
[    0.389614] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[    0.389653] pci 0000:02:00.0: [197b:2362] type 00 class 0x010601
[    0.389677] pci 0000:02:00.0: reg 10: [io  0xd040-0xd047]
[    0.389688] pci 0000:02:00.0: reg 14: [io  0xd030-0xd033]
[    0.389698] pci 0000:02:00.0: reg 18: [io  0xd020-0xd027]
[    0.389709] pci 0000:02:00.0: reg 1c: [io  0xd010-0xd013]
[    0.389719] pci 0000:02:00.0: reg 20: [io  0xd000-0xd00f]
[    0.389730] pci 0000:02:00.0: reg 24: [mem 0xfe400000-0xfe4001ff]
[    0.389741] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.389783] pci 0000:02:00.0: PME# supported from D3hot
[    0.397589] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.397593] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.397595] pci 0000:00:04.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.397636] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.397649] pci 0000:03:00.0: reg 10: [io  0xc000-0xc0ff]
[    0.397670] pci 0000:03:00.0: reg 18: [mem 0xdc104000-0xdc104fff 64bit pref]
[    0.397684] pci 0000:03:00.0: reg 20: [mem 0xdc100000-0xdc103fff 64bit pref]
[    0.397741] pci 0000:03:00.0: supports D1 D2
[    0.397742] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.405577] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.405582] pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
[    0.405586] pci 0000:00:05.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[    0.405626] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.405642] pci 0000:04:00.0: reg 10: [mem 0xfe300000-0xfe301fff 64bit]
[    0.405719] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.413563] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.413568] pci 0000:00:06.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.413610] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[    0.413625] pci 0000:05:00.0: reg 10: [mem 0xfe200000-0xfe201fff 64bit]
[    0.413703] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.421553] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    0.421558] pci 0000:00:07.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.421613] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
[    0.421620] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.421622] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.421623] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.421624] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.421626] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.421627] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.421629] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.421669] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[    0.421735] pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010
[    0.421758] pci 0000:08:00.0: reg 10: [mem 0xfe100000-0xfe1007ff 64bit]
[    0.421769] pci 0000:08:00.0: reg 18: [io  0xb000-0xb0ff]
[    0.421864] pci 0000:08:00.0: supports D2
[    0.421866] pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
[    0.429545] pci 0000:00:15.1: PCI bridge to [bus 08-08]
[    0.429550] pci 0000:00:15.1:   bridge window [io  0xb000-0xbfff]
[    0.429553] pci 0000:00:15.1:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.429581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.429708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.429756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[    0.429782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[    0.429815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[    0.429842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[    0.429875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
[    0.429900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
[    0.429924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
[    0.429961]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.429963]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.429964] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.436844] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.436904] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.436962] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.437019] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.437063] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.437097] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.437130] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.437165] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.437260] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.437264] vgaarb: loaded
[    0.437265] vgaarb: bridge control possible 0000:01:00.0
[    0.437400] SCSI subsystem initialized
[    0.437447] libata version 3.00 loaded.
[    0.437464] ACPI: bus type usb registered
[    0.437481] usbcore: registered new interface driver usbfs
[    0.437488] usbcore: registered new interface driver hub
[    0.437513] usbcore: registered new device driver usb
[    0.437575] PCI: Using ACPI for IRQ routing
[    0.444555] PCI: pci_cache_line_size set to 64 bytes
[    0.444648] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.444649] e820: reserve RAM buffer [mem 0xceeca000-0xcfffffff]
[    0.444651] e820: reserve RAM buffer [mem 0xcf2a3000-0xcfffffff]
[    0.444653] e820: reserve RAM buffer [mem 0xcf2b5000-0xcfffffff]
[    0.444655] e820: reserve RAM buffer [mem 0xcf77a000-0xcfffffff]
[    0.444656] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
[    0.444657] e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
[    0.444725] NetLabel: Initializing
[    0.444726] NetLabel:  domain hash size = 128
[    0.444727] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.444737] NetLabel:  unlabeled traffic allowed by default
[    0.444788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.444791] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.446829] Switching to clocksource hpet
[    0.452501] AppArmor: AppArmor Filesystem Enabled
[    0.452514] pnp: PnP ACPI init
[    0.452523] ACPI: bus type pnp registered
[    0.452669] pnp 00:00: [bus 00-ff]
[    0.452671] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.452673] pnp 00:00: [io  0x0000-0x03af window]
[    0.452674] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.452675] pnp 00:00: [io  0x03b0-0x03df window]
[    0.452677] pnp 00:00: [io  0x0d00-0xffff window]
[    0.452678] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.452680] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.452681] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[    0.452682] pnp 00:00: [mem 0x00000000 window]
[    0.452720] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.452750] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.452789] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.452792] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.453293] pnp 00:02: [io  0x040b]
[    0.453295] pnp 00:02: [io  0x04d6]
[    0.453296] pnp 00:02: [io  0x0c00-0x0c01]
[    0.453297] pnp 00:02: [io  0x0c14]
[    0.453298] pnp 00:02: [io  0x0c50-0x0c51]
[    0.453300] pnp 00:02: [io  0x0c52]
[    0.453301] pnp 00:02: [io  0x0c6c]
[    0.453302] pnp 00:02: [io  0x0c6f]
[    0.453303] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.453304] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.453306] pnp 00:02: [io  0x0cd4-0x0cd5]
[    0.453307] pnp 00:02: [io  0x0cd6-0x0cd7]
[    0.453308] pnp 00:02: [io  0x0cd8-0x0cdf]
[    0.453309] pnp 00:02: [io  0x0800-0x089f]
[    0.453311] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.453312] pnp 00:02: [io  0x0000-0x000f]
[    0.453313] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.453314] pnp 00:02: [io  0x0900-0x090f]
[    0.453316] pnp 00:02: [io  0x0910-0x091f]
[    0.453317] pnp 00:02: [io  0xfe00-0xfefe]
[    0.453318] pnp 00:02: [io  0x0060-0x005f disabled]
[    0.453320] pnp 00:02: [io  0x0064-0x0063 disabled]
[    0.453321] pnp 00:02: [io  0x0485-0x0486]
[    0.453322] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.453323] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.453325] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[    0.453326] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[    0.453327] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[    0.453328] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.453331] pnp 00:02: [mem 0xff800000-0xffffffff]
[    0.453389] system 00:02: [io  0x040b] has been reserved
[    0.453391] system 00:02: [io  0x04d6] has been reserved
[    0.453393] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.453394] system 00:02: [io  0x0c14] has been reserved
[    0.453396] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.453397] system 00:02: [io  0x0c52] has been reserved
[    0.453399] system 00:02: [io  0x0c6c] has been reserved
[    0.453402] system 00:02: [io  0x0c6f] has been reserved
[    0.453404] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.453405] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.453407] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.453408] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.453410] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.453412] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.453413] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.453415] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.453416] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.453418] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.453420] system 00:02: [io  0x0485-0x0486] has been reserved
[    0.453422] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.453424] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.453426] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.453428] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.453430] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.453431] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.453433] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
[    0.453436] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.453562] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.453563] pnp 00:03: [io  0x0a00-0x0a0f]
[    0.453565] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.453566] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.453603] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.453606] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.453640] pnp 00:04: [irq 12]
[    0.453663] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.453685] pnp 00:05: [dma 4]
[    0.453687] pnp 00:05: [io  0x0000-0x000f]
[    0.453688] pnp 00:05: [io  0x0081-0x0083]
[    0.453689] pnp 00:05: [io  0x0087]
[    0.453690] pnp 00:05: [io  0x0089-0x008b]
[    0.453692] pnp 00:05: [io  0x008f]
[    0.453693] pnp 00:05: [io  0x00c0-0x00df]
[    0.453711] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.453719] pnp 00:06: [io  0x0070-0x0071]
[    0.453722] pnp 00:06: [irq 8]
[    0.453742] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.453748] pnp 00:07: [io  0x0061]
[    0.453766] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.453785] pnp 00:08: [io  0x0010-0x001f]
[    0.453786] pnp 00:08: [io  0x0022-0x003f]
[    0.453788] pnp 00:08: [io  0x0044-0x005f]
[    0.453789] pnp 00:08: [io  0x0062-0x0063]
[    0.453790] pnp 00:08: [io  0x0065-0x006f]
[    0.453791] pnp 00:08: [io  0x0072-0x007f]
[    0.453792] pnp 00:08: [io  0x0080]
[    0.453794] pnp 00:08: [io  0x0084-0x0086]
[    0.453795] pnp 00:08: [io  0x0088]
[    0.453796] pnp 00:08: [io  0x008c-0x008e]
[    0.453797] pnp 00:08: [io  0x0090-0x009f]
[    0.453799] pnp 00:08: [io  0x00a2-0x00bf]
[    0.453800] pnp 00:08: [io  0x00e0-0x00ef]
[    0.453801] pnp 00:08: [io  0x04d0-0x04d1]
[    0.453843] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.453845] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.453852] pnp 00:09: [io  0x00f0-0x00ff]
[    0.453855] pnp 00:09: [irq 13]
[    0.453874] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.453918] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.453936] pnp 00:0b: [io  0x0060]
[    0.453937] pnp 00:0b: [io  0x0064]
[    0.453940] pnp 00:0b: [irq 1]
[    0.453965] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.454070] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.454109] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.454218] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.454220] pnp 00:0d: [mem 0xfec20000-0xfec200ff]
[    0.454267] system 00:0d: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.454269] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.454382] pnp 00:0e: [mem 0xfed00000-0xfed003ff]
[    0.454413] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.454416] pnp: PnP ACPI: found 15 devices
[    0.454417] ACPI: ACPI bus type pnp unregistered
[    0.460746] pci 0000:00:04.0: BAR 15: assigned [mem 0xdc000000-0xdc0fffff pref]
[    0.460748] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.460750] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.460753] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
[    0.460756] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[    0.460760] pci 0000:02:00.0: BAR 6: assigned [mem 0xdc000000-0xdc00ffff pref]
[    0.460761] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.460763] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.460766] pci 0000:00:04.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.460768] pci 0000:00:04.0:   bridge window [mem 0xdc000000-0xdc0fffff pref]
[    0.460771] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.460773] pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
[    0.460776] pci 0000:00:05.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[    0.460779] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.460782] pci 0000:00:06.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.460786] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    0.460789] pci 0000:00:07.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.460792] pci 0000:00:14.4: PCI bridge to [bus 06-06]
[    0.460802] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[    0.460810] pci 0000:00:15.1: PCI bridge to [bus 08-08]
[    0.460812] pci 0000:00:15.1:   bridge window [io  0xb000-0xbfff]
[    0.460816] pci 0000:00:15.1:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.460855] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.460856] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.460858] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.460859] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.460861] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.460862] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.460864] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[    0.460865] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.460867] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[    0.460868] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
[    0.460870] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.460871] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.460872] pci_bus 0000:02: resource 2 [mem 0xdc000000-0xdc0fffff pref]
[    0.460874] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.460875] pci_bus 0000:03: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[    0.460877] pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.460878] pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.460880] pci_bus 0000:06: resource 4 [io  0x0000-0x03af]
[    0.460881] pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7]
[    0.460883] pci_bus 0000:06: resource 6 [io  0x03b0-0x03df]
[    0.460884] pci_bus 0000:06: resource 7 [io  0x0d00-0xffff]
[    0.460886] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
[    0.460887] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
[    0.460888] pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff]
[    0.460890] pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
[    0.460891] pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.460913] NET: Registered protocol family 2
[    0.461215] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.462505] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.464163] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.464368] TCP: Hash tables configured (established 524288 bind 65536)
[    0.464369] TCP: reno registered
[    0.464387] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.464459] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.464562] NET: Registered protocol family 1
[    0.592829] Freeing initrd memory: 22408k freed
[    0.786440] pci 0000:01:00.0: Boot video device
[    0.786531] PCI: CLS 64 bytes, default 64
[    0.786930] PCI-DMA: Disabling AGP.
[    0.787010] PCI-DMA: aperture base @ f8000000 size 65536 KB
[    0.787011] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
[    0.787013]  [mem 0xf8000000-0xfbffffff] page 2M
[    0.787017] PCI-DMA: using GART IOMMU.
[    0.787019] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.791119] LVT offset 0 assigned for vector 0x400
[    0.791151] perf: AMD IBS detected (0x000000ff)
[    0.791328] audit: initializing netlink socket (disabled)
[    0.791342] type=2000 audit(1357803747.652:1): initialized
[    0.807708] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.810155] VFS: Disk quotas dquot_6.5.2
[    0.810188] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.810607] fuse init (API version 7.19)
[    0.810669] msgmni has been set to 32161
[    0.810998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.811026] io scheduler noop registered
[    0.811028] io scheduler deadline registered (default)
[    0.811049] io scheduler cfq registered
[    0.811309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.811323] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.811412] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.811416] ACPI: Power Button [PWRB]
[    0.811445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.811447] ACPI: Power Button [PWRF]
[    0.811511] ACPI: acpi_idle registered with cpuidle
[    0.816623] ioremap: invalid physical address 3c8801800000001
[    0.816625] ------------[ cut here ]------------
[    0.816629] WARNING: at /build/buildd/linux-3.5.0/arch/x86/mm/ioremap.c:83 __ioremap_caller+0x372/0x380()
[    0.816630] Hardware name: MS-7640
[    0.816630] Modules linked in:
[    0.816632] Pid: 1, comm: swapper/0 Not tainted 3.5.0-21-generic #32-Ubuntu
[    0.816634] Call Trace:
[    0.816638]  [<ffffffff81051c1f>] warn_slowpath_common+0x7f/0xc0
[    0.816640]  [<ffffffff81051c7a>] warn_slowpath_null+0x1a/0x20
[    0.816642]  [<ffffffff81043462>] __ioremap_caller+0x372/0x380
[    0.816645]  [<ffffffff81d25891>] ? bgrt_init+0x47/0x126
[    0.816649]  [<ffffffff813b318c>] ? acpi_get_table_with_size+0x5f/0xbe
[    0.816651]  [<ffffffff81d2584a>] ? acpi_hed_init+0x30/0x30
[    0.816653]  [<ffffffff810434c7>] ioremap_nocache+0x17/0x20
[    0.816655]  [<ffffffff81d25891>] bgrt_init+0x47/0x126
[    0.816657]  [<ffffffff8100212a>] do_one_initcall+0x12a/0x180
[    0.816660]  [<ffffffff81cf3d3a>] kernel_init+0x140/0x1c9
[    0.816661]  [<ffffffff81cf3588>] ? loglevel+0x31/0x31
[    0.816664]  [<ffffffff8168cc64>] kernel_thread_helper+0x4/0x10
[    0.816666]  [<ffffffff81cf3bfa>] ? start_kernel+0x3d2/0x3d2
[    0.816667]  [<ffffffff8168cc60>] ? gs_change+0x13/0x13
[    0.816672] ---[ end trace 710b8980723a7c6f ]---
[    0.816673] GHES: HEST is not enabled!
[    0.816736] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.837121] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.838161] Linux agpgart interface v0.103
[    0.839271] brd: module loaded
[    0.839823] loop: module loaded
[    0.839897] ahci 0000:00:11.0: version 3.0
[    0.840020] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.840023] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    0.840580] scsi0 : ahci
[    0.840654] scsi1 : ahci
[    0.840706] scsi2 : ahci
[    0.840757] scsi3 : ahci
[    0.840808] scsi4 : ahci
[    0.840856] scsi5 : ahci
[    0.841147] ata1: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19
[    0.841150] ata2: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19
[    0.841152] ata3: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b200 irq 19
[    0.841154] ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19
[    0.841156] ata5: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b300 irq 19
[    0.841158] ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b380 irq 19
[    0.841275] ahci 0000:02:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.841277] ahci 0000:02:00.0: flags: 64bit ncq led clo pmp pio 
[    0.841489] scsi6 : ahci
[    0.841540] scsi7 : ahci
[    0.841596] ata7: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400100 irq 44
[    0.841599] ata8: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400180 irq 44
[    0.841815] Fixed MDIO Bus: probed
[    0.841847] tun: Universal TUN/TAP device driver, 1.6
[    0.841848] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.841886] PPP generic driver version 2.4.2
[    0.841922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.841943] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.841948] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.841954] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.841971] QUIRK: Enable AMD PLL fix
[    0.841980] ehci_hcd 0000:00:12.2: debug port 1
[    0.841995] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe509000
[    0.850288] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.850308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.850309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850311] usb usb1: Product: EHCI Host Controller
[    0.850312] usb usb1: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[    0.850313] usb usb1: SerialNumber: 0000:00:12.2
[    0.850398] hub 1-0:1.0: USB hub found
[    0.850401] hub 1-0:1.0: 5 ports detected
[    0.850467] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.850471] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.850476] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.850490] ehci_hcd 0000:00:13.2: debug port 1
[    0.850500] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe507000
[    0.862271] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.862288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.862289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.862291] usb usb2: Product: EHCI Host Controller
[    0.862292] usb usb2: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[    0.862293] usb usb2: SerialNumber: 0000:00:13.2
[    0.862370] hub 2-0:1.0: USB hub found
[    0.862373] hub 2-0:1.0: 5 ports detected
[    0.862437] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    0.862440] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    0.862445] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.862460] ehci_hcd 0000:00:16.2: debug port 1
[    0.862470] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe504000
[    0.874253] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    0.874270] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.874271] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.874273] usb usb3: Product: EHCI Host Controller
[    0.874274] usb usb3: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[    0.874275] usb usb3: SerialNumber: 0000:00:16.2
[    0.874353] hub 3-0:1.0: USB hub found
[    0.874356] hub 3-0:1.0: 4 ports detected
[    0.874408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.874430] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.874435] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    0.874452] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe50a000
[    0.934152] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.934154] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.934155] usb usb4: Product: OHCI Host Controller
[    0.934156] usb usb4: Manufacturer: Linux 3.5.0-21-generic ohci_hcd
[    0.934158] usb usb4: SerialNumber: 0000:00:12.0
[    0.934234] hub 4-0:1.0: USB hub found
[    0.934239] hub 4-0:1.0: 5 ports detected
[    0.934294] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.934298] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    0.934309] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe508000
[    0.994057] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.994059] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.994060] usb usb5: Product: OHCI Host Controller
[    0.994062] usb usb5: Manufacturer: Linux 3.5.0-21-generic ohci_hcd
[    0.994063] usb usb5: SerialNumber: 0000:00:13.0
[    0.994140] hub 5-0:1.0: USB hub found
[    0.994144] hub 5-0:1.0: 5 ports detected
[    0.994200] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    0.994204] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    0.994215] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe506000
[    1.053986] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.053988] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.053990] usb usb6: Product: OHCI Host Controller
[    1.053991] usb usb6: Manufacturer: Linux 3.5.0-21-generic ohci_hcd
[    1.053993] usb usb6: SerialNumber: 0000:00:14.5
[    1.054073] hub 6-0:1.0: USB hub found
[    1.054078] hub 6-0:1.0: 2 ports detected
[    1.054137] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.054141] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.054155] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe505000
[    1.113926] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.113928] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.113930] usb usb7: Product: OHCI Host Controller
[    1.113931] usb usb7: Manufacturer: Linux 3.5.0-21-generic ohci_hcd
[    1.113932] usb usb7: SerialNumber: 0000:00:16.0
[    1.114012] hub 7-0:1.0: USB hub found
[    1.114016] hub 7-0:1.0: 4 ports detected
[    1.114062] uhci_hcd: USB Universal Host Controller Interface driver
[    1.114096] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.114099] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[    1.114219] xhci_hcd 0000:04:00.0: irq 51, io mem 0xfe300000
[    1.114264] xhci_hcd 0000:04:00.0: irq 72 for MSI/MSI-X
[    1.114270] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[    1.114275] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
[    1.114280] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
[    1.114285] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
[    1.114290] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
[    1.114295] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
[    1.114300] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
[    1.114389] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.114391] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114392] usb usb8: Product: xHCI Host Controller
[    1.114393] usb usb8: Manufacturer: Linux 3.5.0-21-generic xhci_hcd
[    1.114394] usb usb8: SerialNumber: 0000:04:00.0
[    1.114450] xHCI xhci_add_endpoint called for root hub
[    1.114451] xHCI xhci_check_bandwidth called for root hub
[    1.114466] hub 8-0:1.0: USB hub found
[    1.114470] hub 8-0:1.0: 2 ports detected
[    1.114515] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.114517] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[    1.117664] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    1.117665] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.117667] usb usb9: Product: xHCI Host Controller
[    1.117668] usb usb9: Manufacturer: Linux 3.5.0-21-generic xhci_hcd
[    1.117669] usb usb9: SerialNumber: 0000:04:00.0
[    1.117730] xHCI xhci_add_endpoint called for root hub
[    1.117731] xHCI xhci_check_bandwidth called for root hub
[    1.117746] hub 9-0:1.0: USB hub found
[    1.117751] hub 9-0:1.0: 2 ports detected
[    1.117839] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.117860] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[    1.117988] xhci_hcd 0000:05:00.0: irq 50, io mem 0xfe200000
[    1.118030] xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
[    1.118036] xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
[    1.118041] xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
[    1.118046] xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
[    1.118051] xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
[    1.118056] xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
[    1.118061] xhci_hcd 0000:05:00.0: irq 86 for MSI/MSI-X
[    1.118065] xhci_hcd 0000:05:00.0: irq 87 for MSI/MSI-X
[    1.118158] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.118160] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.118162] usb usb10: Product: xHCI Host Controller
[    1.118163] usb usb10: Manufacturer: Linux 3.5.0-21-generic xhci_hcd
[    1.118164] usb usb10: SerialNumber: 0000:05:00.0
[    1.118220] xHCI xhci_add_endpoint called for root hub
[    1.118221] xHCI xhci_check_bandwidth called for root hub
[    1.118240] hub 10-0:1.0: USB hub found
[    1.118244] hub 10-0:1.0: 2 ports detected
[    1.118291] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.118294] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
[    1.121428] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.121430] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.121431] usb usb11: Product: xHCI Host Controller
[    1.121433] usb usb11: Manufacturer: Linux 3.5.0-21-generic xhci_hcd
[    1.121434] usb usb11: SerialNumber: 0000:05:00.0
[    1.121484] xHCI xhci_add_endpoint called for root hub
[    1.121485] xHCI xhci_check_bandwidth called for root hub
[    1.121501] hub 11-0:1.0: USB hub found
[    1.121505] hub 11-0:1.0: 2 ports detected
[    1.121640] usbcore: registered new interface driver libusual
[    1.121668] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.122011] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.122015] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.122088] mousedev: PS/2 mouse device common for all mice
[    1.122193] rtc_cmos 00:06: RTC can wake from S4
[    1.122287] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.122307] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.122362] device-mapper: uevent: version 1.0.3
[    1.122414] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.122493] cpuidle: using governor ladder
[    1.122611] cpuidle: using governor menu
[    1.122612] EFI Variables Facility v0.08 2004-May-17
[    1.122779] ashmem: initialized
[    1.122872] TCP: cubic registered
[    1.122944] NET: Registered protocol family 10
[    1.123084] NET: Registered protocol family 17
[    1.123090] Key type dns_resolver registered
[    1.123204] PM: Hibernation image not present or could not be loaded.
[    1.123211] registered taskstats version 1
[    1.125766] Key type trusted registered
[    1.127399] Key type encrypted registered
[    1.129939]   Magic number: 13:144:723
[    1.129949] block loop3: hash matches
[    1.130032] rtc_cmos 00:06: setting system clock to 2013-01-10 07:42:28 UTC (1357803748)
[    1.130114] powernow-k8: Found 1 AMD FX(tm)-8150 Eight-Core Processor            (8 cpu cores) (version 2.20.00)
[    1.130144] powernow-k8: Core Performance Boosting: on.
[    1.130178] powernow-k8:    0 : pstate 0 (3600 MHz)
[    1.130179] powernow-k8:    1 : pstate 4 (1400 MHz)
[    1.130871] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.130872] EDD information not available.
[    1.157951] ata8: SATA link down (SStatus 0 SControl 300)
[    1.158008] ata7: SATA link down (SStatus 0 SControl 300)
[    1.161900] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.273735] usb 1-2: device descriptor read/64, error -32
[    1.329656] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.329692] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.329727] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.329758] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.329783] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.330512] ata3.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[    1.330515] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.330542] ata4.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[    1.330543] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.331460] ata3.00: configured for UDMA/133
[    1.331479] ata4.00: configured for UDMA/133
[    1.332794] ata1.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[    1.332798] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.333001] ata2.00: ATA-8: WDC WD20EADS-32S2B0, 01.00A01, max UDMA/133
[    1.333004] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.333693] ata5.00: ATAPI: PLEXTOR BD-R   PX-B920SA, 1.03, max UDMA/133
[    1.336180] ata2.00: configured for UDMA/133
[    1.336758] ata1.00: configured for UDMA/133
[    1.337122] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[    1.337254] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.337322] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.337421] sd 0:0:0:0: [sda] Write Protect is off
[    1.337424] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.337458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.339130] ata5.00: configured for UDMA/133
[    1.345724]  sda: sda1
[    1.346258] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.346345] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EADS-32S 01.0 PQ: 0 ANSI: 5
[    1.346443] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.346450] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.346538] sd 1:0:0:0: [sdb] Write Protect is off
[    1.346540] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.346571] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.354435]  sdb: sdb1
[    1.354957] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.355026] scsi 2:0:0:0: Direct-Access     ATA      ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[    1.355125] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.355139] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.355226] sd 2:0:0:0: [sdc] Write Protect is off
[    1.355229] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.355263] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.401764]  sdc: sdc1 sdc2 sdc3 sdc4
[    1.402406] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.402492] scsi 3:0:0:0: Direct-Access     ATA      ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[    1.402592] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.402600] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.402675] sd 3:0:0:0: [sdd] Write Protect is off
[    1.402677] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.402712] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.428509]  sdd: sdd1
[    1.429027] sd 3:0:0:0: [sdd] Attached SCSI disk
[    1.454013] scsi 4:0:0:0: CD-ROM            PLEXTOR  BD-R   PX-B920SA 1.03 PQ: 0 ANSI: 5
[    1.489415] usb 1-2: device descriptor read/64, error -32
[    1.553324] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.556271] ata6.00: ATAPI: PIONEER BD-ROM  BDC-202, 1.01, max UDMA/66
[    1.559443] ata6.00: configured for UDMA/66
[    1.563957] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.563963] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.564184] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.564249] sr 4:0:0:0: Attached scsi generic sg4 type 5
[    1.572816] scsi 5:0:0:0: CD-ROM            PIONEER  BD-ROM  BDC-202  1.01 PQ: 0 ANSI: 5
[    1.584002] sr1: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.584195] sr 5:0:0:0: Attached scsi CD-ROM sr1
[    1.584263] sr 5:0:0:0: Attached scsi generic sg5 type 5
[    1.586396] Freeing unused kernel memory: 932k freed
[    1.586559] Write protecting the kernel read-only data: 12288k
[    1.591767] Freeing unused kernel memory: 1464k freed
[    1.595842] Freeing unused kernel memory: 1120k freed
[    1.615004] udevd[138]: starting version 175
[    1.647520] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.647633] r8169 0000:03:00.0: irq 88 for MSI/MSI-X
[    1.648372] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc900125f4000, 8c:89:a5:cd:cc:9a, XID 0c900800 IRQ 88
[    1.648375] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.705083] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    1.713122] firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.788970] Refined TSC clocksource calibration: 3600.306 MHz.
[    1.788989] Switching to clocksource tsc
[    1.816939] usb 1-2: device descriptor read/64, error -32
[    2.032609] usb 1-2: device descriptor read/64, error -32
[    2.212546] firewire_core 0000:08:00.0: created device fw0: GUID 0010dc0001d302a5, S400
[    2.248303] usb 1-2: new high-speed USB device number 4 using ehci_hcd
[    2.655674] usb 1-2: device not accepting address 4, error -32
[    2.767520] usb 1-2: new high-speed USB device number 5 using ehci_hcd
[    3.174900] usb 1-2: device not accepting address 5, error -32
[    3.174923] hub 1-0:1.0: unable to enumerate USB device on port 2
[    3.466486] usb 3-3: new high-speed USB device number 3 using ehci_hcd
[    3.578224] usb 3-3: device descriptor read/64, error -32
[    3.614115] xor: automatically using best checksumming function:
[    3.650108]    avx       : 12761.000 MB/sec
[    3.650568] device-mapper: dm-raid45: initialized v0.2594b
[    3.716440] EXT4-fs (sdc4): INFO: recovery required on readonly filesystem
[    3.716442] EXT4-fs (sdc4): write access will be enabled during recovery
[    3.794008] usb 3-3: device descriptor read/64, error -32
[    3.984183] EXT4-fs (sdc4): orphan cleanup on readonly fs
[    3.984189] EXT4-fs (sdc4): ext4_orphan_cleanup: deleting unreferenced inode 45615104
[    3.984236] EXT4-fs (sdc4): 1 orphan inode deleted
[    3.984237] EXT4-fs (sdc4): recovery complete
[    4.009683] usb 3-3: new high-speed USB device number 4 using ehci_hcd
[    4.074702] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
[    4.121520] usb 3-3: device descriptor read/64, error -32
[    4.337196] usb 3-3: device descriptor read/64, error -32
[    4.552878] usb 3-3: new high-speed USB device number 5 using ehci_hcd
[    4.960270] usb 3-3: device not accepting address 5, error -32
[    5.072109] usb 3-3: new high-speed USB device number 6 using ehci_hcd
[    5.479503] usb 3-3: device not accepting address 6, error -32
[    5.479525] hub 3-0:1.0: unable to enumerate USB device on port 3
[    5.755093] usb 5-2: new full-speed USB device number 2 using ohci_hcd
[    5.894945] usb 5-2: device descriptor read/64, error -32
[    6.138553] usb 5-2: device descriptor read/64, error -32
[    6.378181] usb 5-2: new full-speed USB device number 3 using ohci_hcd
[    6.517963] usb 5-2: device descriptor read/64, error -32
[    6.761610] usb 5-2: device descriptor read/64, error -32
[    7.001149] usb 5-2: new full-speed USB device number 4 using ohci_hcd
[    7.408651] usb 5-2: device not accepting address 4, error -32
[    7.544454] usb 5-2: new full-speed USB device number 5 using ohci_hcd
[    7.951913] usb 5-2: device not accepting address 5, error -32
[    7.951942] hub 5-0:1.0: unable to enumerate USB device on port 2
[    8.215451] usb 7-1: new low-speed USB device number 2 using ohci_hcd
[    8.355243] usb 7-1: device descriptor read/64, error -32
[    8.598883] usb 7-1: device descriptor read/64, error -32
[    8.838529] usb 7-1: new low-speed USB device number 3 using ohci_hcd
[    8.978330] usb 7-1: device descriptor read/64, error -32
[    9.221970] usb 7-1: device descriptor read/64, error -32
[    9.461615] usb 7-1: new low-speed USB device number 4 using ohci_hcd
[    9.869007] usb 7-1: device not accepting address 4, error -32
[   10.004849] usb 7-1: new low-speed USB device number 5 using ohci_hcd
[   10.412189] usb 7-1: device not accepting address 5, error -32
[   10.412207] hub 7-0:1.0: unable to enumerate USB device on port 1
[   10.675712] usb 7-3: new full-speed USB device number 6 using ohci_hcd
[   10.815589] usb 7-3: device descriptor read/64, error -32
[   11.059245] usb 7-3: device descriptor read/64, error -32
[   11.298889] usb 7-3: new full-speed USB device number 7 using ohci_hcd
[   11.438651] usb 7-3: device descriptor read/64, error -32
[   11.682287] usb 7-3: device descriptor read/64, error -32
[   11.922024] usb 7-3: new full-speed USB device number 8 using ohci_hcd
[   12.329261] usb 7-3: device not accepting address 8, error -32
[   12.465161] usb 7-3: new full-speed USB device number 9 using ohci_hcd
[   12.872621] usb 7-3: device not accepting address 9, error -32
[   12.872642] hub 7-0:1.0: unable to enumerate USB device on port 3
[   13.519601] usb 4-2: new full-speed USB device number 2 using ohci_hcd
[   13.659394] usb 4-2: device descriptor read/64, error -32
[   13.903091] usb 4-2: device descriptor read/64, error -32
[   14.142664] usb 4-2: new full-speed USB device number 3 using ohci_hcd
[   14.282371] usb 4-2: device descriptor read/64, error -32
[   14.526114] usb 4-2: device descriptor read/64, error -32
[   14.765756] usb 4-2: new full-speed USB device number 4 using ohci_hcd
[   15.173114] usb 4-2: device not accepting address 4, error -32
[   15.308951] usb 4-2: new full-speed USB device number 5 using ohci_hcd
[   15.716323] usb 4-2: device not accepting address 5, error -32
[   15.716345] hub 4-0:1.0: unable to enumerate USB device on port 2
[   16.533499] Adding 11718652k swap on /dev/sdc3.  Priority:-1 extents:1 across:11718652k 
[   16.537103] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.590675] udevd[528]: starting version 175
[   16.777227] microcode: CPU0: patch_level=0x06000629
[   16.813616] wmi: Mapper loaded
[   16.822213] device-mapper: multipath: version 1.4.0 loaded
[   16.868988] microcode: CPU1: patch_level=0x06000629
[   16.870198] microcode: CPU2: patch_level=0x06000629
[   16.871380] microcode: CPU3: patch_level=0x06000629
[   16.872626] microcode: CPU4: patch_level=0x06000629
[   16.873819] microcode: CPU5: patch_level=0x06000629
[   16.874957] microcode: CPU6: patch_level=0x06000629
[   16.876164] microcode: CPU7: patch_level=0x06000629
[   16.877433] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   16.892854] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   16.926331] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[   16.926396] sp5100_tco: mmio address 0xbafe00 already in use
[   16.955853] MCE: In-kernel MCE decoding enabled.
[   17.093740] type=1400 audit(1357800164.480:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=573 comm="apparmor_parser"
[   17.093752] type=1400 audit(1357800164.480:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=766 comm="apparmor_parser"
[   17.094141] type=1400 audit(1357800164.480:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
[   17.094156] type=1400 audit(1357800164.480:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
[   17.094374] type=1400 audit(1357800164.484:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[   17.094401] type=1400 audit(1357800164.484:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
[   17.252446] EDAC MC: Ver: 2.1.0
[   17.305480] lp: driver loaded but no devices found
[   17.324985] AMD64 EDAC driver v3.4.0
[   17.325019] EDAC amd64: DRAM ECC disabled.
[   17.325031] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   17.325031]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   17.325031]  (Note that use of the override may cause unknown side effects.)
[   17.513817] kvm: Nested Virtualization enabled
[   17.513823] kvm: Nested Paging enabled
[   17.643351] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
[   17.643429] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[   17.643500] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   17.643570] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   17.643636] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   17.643715] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   17.643785] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   17.643853] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   17.644141] hda_intel: Disabling MSI
[   17.644154] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   18.528358] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[   18.528478] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[   18.528547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[   18.528630] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[   18.896549] EXT4-fs (sdc4): re-mounted. Opts: errors=remount-ro
[   19.101496] nvidia: module license 'NVIDIA' taints kernel.
[   19.101499] Disabling lock debugging due to kernel taint
[   19.111726] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   19.111845] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.51  Tue Sep 18 17:16:56 PDT 2012
[   19.368224] init: udev-fallback-graphics main process (1169) terminated with status 1
[   19.561871] init: failsafe main process (1198) killed by TERM signal
[   19.621290] type=1400 audit(1357800167.012:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1299 comm="apparmor_parser"
[   19.621299] type=1400 audit(1357800167.012:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1301 comm="apparmor_parser"
[   19.621472] type=1400 audit(1357800167.012:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1300 comm="apparmor_parser"
[   19.621690] type=1400 audit(1357800167.012:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1299 comm="apparmor_parser"
[   19.634799] FS-Cache: Loaded
[   19.647121] Bluetooth: Core ver 2.16
[   19.647134] NET: Registered protocol family 31
[   19.647135] Bluetooth: HCI device and connection manager initialized
[   19.647137] Bluetooth: HCI socket layer initialized
[   19.647138] Bluetooth: L2CAP socket layer initialized
[   19.647141] Bluetooth: SCO socket layer initialized
[   19.696966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.696968] Bluetooth: BNEP filters: protocol multicast
[   19.717187] ppdev: user-space parallel port driver
[   19.757555] init: gdm main process (1411) killed by TERM signal
[   20.048008] FS-Cache: Netfs 'cifs' registered for caching
[   20.048318] Key type cifs.spnego registered
[   20.048336] Key type cifs.idmap registered
[   20.048687] CIFS: no cache= option specified, using "cache=loose". This default will change to "cache=strict" in 3.7.
[   20.052195] Bluetooth: RFCOMM TTY layer initialized
[   20.052206] Bluetooth: RFCOMM socket layer initialized
[   20.052210] Bluetooth: RFCOMM ver 1.11

Y a ça qui cloche :

[    0.811511] ACPI: acpi_idle registered with cpuidle
[    0.816623] ioremap: invalid physical address 3c8801800000001
[    0.816625] ------------[ cut here ]------------
[    0.816629] WARNING: at /build/buildd/linux-3.5.0/arch/x86/mm/ioremap.c:83 __ioremap_caller+0x372/0x380()
[    0.816630] Hardware name: MS-7640
[    0.816630] Modules linked in:
[    0.816632] Pid: 1, comm: swapper/0 Not tainted 3.5.0-21-generic #32-Ubuntu
[    0.816634] Call Trace:
[    0.816638]  [<ffffffff81051c1f>] warn_slowpath_common+0x7f/0xc0
[    0.816640]  [<ffffffff81051c7a>] warn_slowpath_null+0x1a/0x20
[    0.816642]  [<ffffffff81043462>] __ioremap_caller+0x372/0x380
[    0.816645]  [<ffffffff81d25891>] ? bgrt_init+0x47/0x126
[    0.816649]  [<ffffffff813b318c>] ? acpi_get_table_with_size+0x5f/0xbe
[    0.816651]  [<ffffffff81d2584a>] ? acpi_hed_init+0x30/0x30
[    0.816653]  [<ffffffff810434c7>] ioremap_nocache+0x17/0x20
[    0.816655]  [<ffffffff81d25891>] bgrt_init+0x47/0x126
[    0.816657]  [<ffffffff8100212a>] do_one_initcall+0x12a/0x180
[    0.816660]  [<ffffffff81cf3d3a>] kernel_init+0x140/0x1c9
[    0.816661]  [<ffffffff81cf3588>] ? loglevel+0x31/0x31
[    0.816664]  [<ffffffff8168cc64>] kernel_thread_helper+0x4/0x10
[    0.816666]  [<ffffffff81cf3bfa>] ? start_kernel+0x3d2/0x3d2
[    0.816667]  [<ffffffff8168cc60>] ? gs_change+0x13/0x13
[    0.816672] ---[ end trace 710b8980723a7c6f ]---
[    0.816673] GHES: HEST is not enabled!
[    0.816736] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
...
[    1.788989] Switching to clocksource tsc
[    1.816939] usb 1-2: device descriptor read/64, error -32
[    2.032609] usb 1-2: device descriptor read/64, error -32
[    2.212546] firewire_core 0000:08:00.0: created device fw0: GUID 0010dc0001d302a5, S400
[    2.248303] usb 1-2: new high-speed USB device number 4 using ehci_hcd
[    2.655674] usb 1-2: device not accepting address 4, error -32
[    2.767520] usb 1-2: new high-speed USB device number 5 using ehci_hcd
[    3.174900] usb 1-2: device not accepting address 5, error -32
[    3.174923] hub 1-0:1.0: unable to enumerate USB device on port 2
[    3.466486] usb 3-3: new high-speed USB device number 3 using ehci_hcd
[    3.578224] usb 3-3: device descriptor read/64, error -32
[    3.614115] xor: automatically using best checksumming function:
[    3.650108]    avx       : 12761.000 MB/sec
[    3.650568] device-mapper: dm-raid45: initialized v0.2594b
...
[    3.650568] device-mapper: dm-raid45: initialized v0.2594b
[    3.716440] EXT4-fs (sdc4): INFO: recovery required on readonly filesystem
[    3.716442] EXT4-fs (sdc4): write access will be enabled during recovery
[    3.794008] usb 3-3: device descriptor read/64, error -32
[    3.984183] EXT4-fs (sdc4): orphan cleanup on readonly fs
[    3.984189] EXT4-fs (sdc4): ext4_orphan_cleanup: deleting unreferenced inode 45615104
[    3.984236] EXT4-fs (sdc4): 1 orphan inode deleted
[    3.984237] EXT4-fs (sdc4): recovery complete
[    4.009683] usb 3-3: new high-speed USB device number 4 using ehci_hcd
[    4.074702] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
...
[   16.537103] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.590675] udevd[528]: starting version 175

Dernière modification par fredthefrenchy (Le 10/01/2013, à 15:37)


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#5 Le 10/01/2013, à 15:57

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

Syslog, j'ai plusieurs fois ces messages :

Jan 10 07:45:14 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Jan 10 07:45:14 PC-FRED dhclient: Internet Systems Consortium DHCP Client 4.2.4
Jan 10 07:45:14 PC-FRED dhclient: Copyright 2004-2012 Internet Systems Consortium.
Jan 10 07:45:14 PC-FRED dhclient: All rights reserved.
Jan 10 07:45:14 PC-FRED dhclient: For info, please visit https://www.isc.org/software/dhcp/
Jan 10 07:45:14 PC-FRED dhclient: 
Jan 10 07:45:14 PC-FRED NetworkManager[1592]: <info> (eth1): DHCPv4 state changed nbi -> preinit
Jan 10 07:45:14 PC-FRED dhclient: Listening on LPF/eth1/8c:89:a5:cd:cc:9a
Jan 10 07:45:14 PC-FRED dhclient: Sending on   LPF/eth1/8c:89:a5:cd:cc:9a
Jan 10 07:45:14 PC-FRED dhclient: Sending on   Socket/fallback
Jan 10 07:45:14 PC-FRED dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
Jan 10 07:45:15 PC-FRED avahi-daemon[1352]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::8e89:a5ff:fecd:cc9a.
Jan 10 07:45:15 PC-FRED avahi-daemon[1352]: New relevant interface eth1.IPv6 for mDNS.
Jan 10 07:45:15 PC-FRED avahi-daemon[1352]: Registering new address record for fe80::8e89:a5ff:fecd:cc9a on eth1.*.
Jan 10 07:45:17 PC-FRED dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
Jan 10 07:45:17 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:22 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:25 PC-FRED dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
Jan 10 07:45:26 PC-FRED kernel: [  178.655893] r8169 0000:03:00.0: eth1: link up
Jan 10 07:45:27 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:32 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:33 PC-FRED dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 20
Jan 10 07:45:34 PC-FRED NetworkManager[1592]: <info> (eth1): IP6 addrconf timed out or failed.
Jan 10 07:45:34 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jan 10 07:45:34 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jan 10 07:45:34 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jan 10 07:45:37 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:50  upsmon[2146]: last message repeated 2 times
Jan 10 07:45:50 PC-FRED kernel: [  202.603855] usb 4-1: new low-speed USB device number 10 using ohci_hcd
Jan 10 07:45:50 PC-FRED kernel: [  202.743646] usb 4-1: device descriptor read/64, error -32
Jan 10 07:45:50 PC-FRED kernel: [  202.987283] usb 4-1: device descriptor read/64, error -32
Jan 10 07:45:50 PC-FRED kernel: [  203.226850] usb 4-1: new low-speed USB device number 11 using ohci_hcd
Jan 10 07:45:51 PC-FRED kernel: [  203.366723] usb 4-1: device descriptor read/64, error -32
Jan 10 07:45:51 PC-FRED kernel: [  203.610362] usb 4-1: device descriptor read/64, error -32
Jan 10 07:45:51 PC-FRED kernel: [  203.850011] usb 4-1: new low-speed USB device number 12 using ohci_hcd
Jan 10 07:45:51 PC-FRED kernel: [  204.257403] usb 4-1: device not accepting address 12, error -32
Jan 10 07:45:52 PC-FRED kernel: [  204.393205] usb 4-1: new low-speed USB device number 13 using ohci_hcd
Jan 10 07:45:52 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:52 PC-FRED kernel: [  204.800595] usb 4-1: device not accepting address 13, error -32
Jan 10 07:45:52 PC-FRED kernel: [  204.800613] hub 4-0:1.0: unable to enumerate USB device on port 1
Jan 10 07:45:52 PC-FRED kernel: [  204.936398] usb 4-2: new full-speed USB device number 14 using ohci_hcd
Jan 10 07:45:52 PC-FRED kernel: [  205.076195] usb 4-2: device descriptor read/64, error -32
Jan 10 07:45:52 PC-FRED kernel: [  205.319833] usb 4-2: device descriptor read/64, error -32
Jan 10 07:45:53 PC-FRED kernel: [  205.559481] usb 4-2: new full-speed USB device number 15 using ohci_hcd
Jan 10 07:45:53 PC-FRED kernel: [  205.699271] usb 4-2: device descriptor read/64, error -32
Jan 10 07:45:53 PC-FRED dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
Jan 10 07:45:53 PC-FRED kernel: [  205.942825] usb 4-2: device descriptor read/64, error -32
Jan 10 07:45:53 PC-FRED kernel: [  206.182559] usb 4-2: new full-speed USB device number 16 using ohci_hcd
Jan 10 07:45:54 PC-FRED kernel: [  206.589949] usb 4-2: device not accepting address 16, error -32
Jan 10 07:45:54 PC-FRED kernel: [  206.725755] usb 4-2: new full-speed USB device number 17 using ohci_hcd
Jan 10 07:45:54 PC-FRED kernel: [  207.133141] usb 4-2: device not accepting address 17, error -32
Jan 10 07:45:54 PC-FRED kernel: [  207.133159] hub 4-0:1.0: unable to enumerate USB device on port 2
Jan 10 07:45:57 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <warn> (eth1): DHCPv4 request timed out.
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> (eth1): canceled DHCP transaction, DHCP client pid 2229
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) started...
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> (eth1): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> Marking connection 'Connexion filaire 1' invalid.
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <warn> Activation (eth1) failed for connection 'Connexion filaire 1'
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) complete.
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 10 07:45:59 PC-FRED NetworkManager[1592]: <info> (eth1): deactivating device (reason 'none') [0]
Jan 10 07:45:59 PC-FRED avahi-daemon[1352]: Withdrawing address record for fe80::8e89:a5ff:fecd:cc9a on eth1.
Jan 10 07:45:59 PC-FRED avahi-daemon[1352]: Leaving mDNS multicast group on interface eth1.IPv6 with address fe80::8e89:a5ff:fecd:cc9a.
Jan 10 07:45:59 PC-FRED avahi-daemon[1352]: Interface eth1.IPv6 no longer relevant for mDNS.
Jan 10 07:46:01 PC-FRED avahi-daemon[1352]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::8e89:a5ff:fecd:cc9a.
Jan 10 07:46:01 PC-FRED avahi-daemon[1352]: New relevant interface eth1.IPv6 for mDNS.
Jan 10 07:46:01 PC-FRED avahi-daemon[1352]: Registering new address record for fe80::8e89:a5ff:fecd:cc9a on eth1.*.
Jan 10 07:46:02 PC-FRED upsmon[2146]: Poll UPS [myups@localhost] failed - Driver not connected

C'est grave docteur ?


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#6 Le 10/01/2013, à 18:57

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

Je pense avoir trouvé l'origine du pb, c est la maj du bios de ma carte mère. Le live CD d' Ubuntu me fait exactement le même phénomène.
Je ne sais pas si je vais pouvoir m en sortir ...


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#7 Le 10/01/2013, à 21:45

Mick4139

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

Bonjour.
Je vois qu'il y a un problème de reconnaissance de matériel au vu des messages d'erreur. Dans ce cas là si je ne me trompe pas il faut tout refaire et formater complètement la partition ubuntu et rester sur une version stable telle que la 12.04. Je ne crois pas qu'un code dans le terminal peut résoudre quelque chose ou une manipulation quelconque. Bonne soirée

Hors ligne

#8 Le 11/01/2013, à 09:24

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

Mick4139 a écrit :

Bonjour.
Je vois qu'il y a un problème de reconnaissance de matériel au vu des messages d'erreur. Dans ce cas là si je ne me trompe pas il faut tout refaire et formater complètement la partition ubuntu et rester sur une version stable telle que la 12.04. Je ne crois pas qu'un code dans le terminal peut résoudre quelque chose ou une manipulation quelconque. Bonne soirée

Je ne pense pas que cela règle le problème. Quand je boot sur le Live  CD, j'ai le même phénomène. Je pense que le bios est incompatible pour l'instant avec Linux 12.10 (et donc Linux 12.04)
C'est certainement un problème de driver. Ce qui me reste à faire, c'est downgrader le bios pour revenir à la situation d'avant je pense.


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#9 Le 11/01/2013, à 09:42

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

La mise à jour du BIOS concernait ceci :

990FXA-GD80 (MS-7640) V11.13 BIOS Release
-------------------------------------------------

1. This is AMI BIOS release

2. This BIOS fixes the following problem of the previous version:
-  Update CPU AGESA code.
-  Improved memory compatibility.

J'ai quand même un doute, c'est peut être un paramètre du bios à modifier ...


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#10 Le 11/01/2013, à 21:19

Mick4139

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

Bonsoir. Je pense que la possibilité d'incompatibilité est fort il faudrait installer ndiswrapper pour installer les drivers nécessaires.
Voici une documentation pour ce logiciel:
http://doc.ubuntu-fr.org/ndiswrapper

Hors ligne

#11 Le 12/01/2013, à 06:37

fredthefrenchy

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

J'ai remis les paramètres du bios par défaut er ça remarche !


CM MSI 990FXA-GD80 - AMD FX8150 8 x 3.6Ghz - G.SKILL KIT EXTREME3 2 X 4 GO PC17000 ARES CAS9 8192 Mo (2133 MHz), 9-11-10-28 - GeForce GTX560 1Go GDDR5 - Ubuntu 16.04 x86-64 dual boot avec W7 64bits

Hors ligne

#12 Le 12/01/2013, à 10:19

Mick4139

Re : [RESOLU] : Clavier non reconnu et plus de réseau filairex

D'accord alors c'était un problème de bios. Je vois que tu as trouvé la solution. Je n'aurais pas été une grande aide.
Profite-en bien

Hors ligne