#1 Le 16/01/2013, à 20:41
- alx777
dell dimension 2400 : activer une autre carte graphique ?
Bonjour,
j'ai voulu installer ubuntu sur le dell dimension 2400 d'une amie, au lieu de son XP qui commençait à faiguer.
Bien mal m'en a pris.
La carte graphique intégrée à la CM est un chipset intel 845, qui marche très très mal sous Ubuntu ou Xubuntu (freezes, cpu qui tape à 100%,..)
J'ai donc acheté une carte PCI (oui pci pas pcie ni agp, il n'y a que cette possibilité sur ce dell), ati rage 128.
celle ci est reconnue, mais il m'est impossible de lui faire afficher quoique ce soit.
Et pour faciliter la tâche, il est impossible de désactiver la carte intégrée dans le bios, c est soit "auto" ,soit "onboard".
si je mets "auto", aucune carte ne marche (écran noir dès le démarrage de l'ordi)
je suis donc obligé de la laisser sur "onboard".
résultat de la commande : sudo lshw -c display
*-display
description: Display controller
produit: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:16 mémoire:e8000000-efffffff mémoire:feb80000-febfffff
*-display NON-RÉCLAMÉ
description: VGA compatible controller
produit: Rage 128 RK/VR
fabriquant: Hynix Semiconductor (Hyundai Electronics)
identifiant matériel: 4
information bus: pci@0000:01:04.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm vga_controller cap_list
configuration: latency=64 mingnt=8
ressources: mémoire:f8000000-fbffffff portE/S:de00(taille=256) mémoire:fe9fc000-fe9fffff mémoire:fea00000-fea1fffflsmod :
Module Size Used by
snd_intel8x0 33455 3
snd_ac97_codec 110213 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80916 2 snd_intel8x0,snd_ac97_codec
dcdbas 14098 0
snd_seq_midi 13132 0
snd_rawmidi 25424 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event
r8712u 163880 0
snd_timer 28931 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 62218 13 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
usbhid 41937 0
hid 77428 1 usbhid
serio_raw 13027 0
soundcore 14635 1 snd
i915 419262 2
snd_page_alloc 14115 2 snd_intel8x0,snd_pcm
shpchp 32325 0
drm_kms_helper 45466 1 i915
drm 197641 3 i915,drm_kms_helper
rfcomm 38139 4
bnep 17830 2
bluetooth 158479 10 rfcomm,bnep
parport_pc 32114 1
ppdev 12849 0
mac_hid 13077 0
i2c_algo_bit 13199 1 i915
video 19068 1 i915
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
b44 31412 0
ssb 50691 1 b44
floppy 60184 0 j'ai également tenté de créer un fichier xorg.conf, avec ceci :
# /etc/X11/xorg.conf
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "ati"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSectionrésultat, écran noir...
après avoir viré le xorg.conf, dans les logs d'X11, il y avait ceci :
[ 643.745] (II) LoadModule: "ati"
[ 643.746] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 643.760] (II) Module ati: vendor="X.Org Foundation"
[ 643.761] compiled for 1.11.3, module version = 6.14.99
[ 643.761] Module class: X.Org Video Driver
[ 643.761] ABI class: X.Org Video Driver, version 11.0
[ 643.761] (EE) No drivers available.
[ 643.761]
Fatal server error:
[ 643.761] no screens foundil semble bien charger le driver de l'ati, mais me dit "no drivers available"...
j'ai du passer une 30aine d'heures la dessus, de l'aide serait bienvenue !
Dernière modification par alx777 (Le 16/01/2013, à 21:26)
Hors ligne
#2 Le 16/01/2013, à 22:32
- sioc
Re : dell dimension 2400 : activer une autre carte graphique ?
Bonsoir,
J'imagine que tu as vu cette page et je ne sais pas vraiment si ça peut t'aider...
On ne sait jamais.... Bonne chance.
Hors ligne
#3 Le 16/01/2013, à 22:42
- Korak
Re : dell dimension 2400 : activer une autre carte graphique ?
Bonjour,
Quelle est la version d'Ubuntu?
Cette carte graphique: ati rage 128, ou celle-ci: chipset intel 845, bof bof bof sur un Ubuntu récent. Mais bon, je peux me tromper.....
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#4 Le 17/01/2013, à 10:54
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
bonjour,
merci pour les réponses.
sioc > merci pour la page, je ne l'avais pas vu... je regarderai ça ce soir...
mais j'ai bien peur d'être obligé de bidouiller un xorg.conf...
(impossibilité de désactiver l'intel dans le bios, donc je pense que l'ati n'affichera jamais le bios... mais bon, si on trouve le moyen de dire à ubuntu d'utiliser l'ati ça sera déjà ça...)
Korak> désolé, j'avais oublié de préciser ça !
Xubuntu version 12.04 LTS .
Sinon, j'avais quand même fait qqes recherches avant d'acheter l'ati , et je n'ai pas trouvé de problème sous ubuntu contrairement à l'intel 845 pour laquelle il n'y a pas de solution, il me semble... Je l'ai acheté pour que son ordi arrête de planter...
Hors ligne
#5 Le 17/01/2013, à 13:55
- sioc
Re : dell dimension 2400 : activer une autre carte graphique ?
@aix77,
Bonjour,
La dite page concerne ati rage 128 et la lointaine ubuntu 8.04.... Mais faut voir...
Hors ligne
#6 Le 17/01/2013, à 14:20
- sioc
Re : dell dimension 2400 : activer une autre carte graphique ?
@aix777
aussi cette page qui donne de l'espoir.
http://www.ubuntulinuxhelp.com/installi … questions/
Mais ça ne résoud pas le problème de désactiver l'intel...
Hors ligne
#7 Le 17/01/2013, à 18:21
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
@sioc :
merci de t'interresser à mon cas ! 
j'ai donc remplacé driver = "ati" par driver ="r128" dans mon xorg.conf (le même que celui du 1er message)
l'ordi redémarre sur le mauvais écran (celui branché sur l'intel) , mais pas d'écran noir.
il a zappé la R128 et est passé sur l'intel :
Xorg.0.log :
[ 24.050] (II) LoadModule: "r128"
[ 24.079] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 24.087] (II) Module r128: vendor="X.Org Foundation"
[ 24.087] compiled for 1.11.3, module version = 6.8.1
[ 24.087] Module class: X.Org Video Driver
[ 24.087] ABI class: X.Org Video Driver, version 11.0
[ 24.087] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 24.088] (++) using VT number 7
[ 24.089] (EE) No devices detected.
[ 24.089] (==) Matched intel as autoconfigured driver 0
[ 24.089] (==) Matched vesa as autoconfigured driver 1
[ 24.089] (==) Matched fbdev as autoconfigured driver 2
[ 24.089] (==) Assigned the driver to the xf86ConfigLayout
[ 24.089] (II) LoadModule: "intel"
[ 24.090] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 24.091] (II) Module intel: vendor="X.Org Foundation"
[ 24.091] compiled for 1.11.3, module version = 2.17.0
[ 24.091] Module class: X.Org Video Driver
[ 24.091] ABI class: X.Org Video Driver, version 11.0il charge le driver R128, mais finit par dire "No devices detected." et passe sur l'intel...
(la commande "sudo lshw -c display" donne le même résultat que sur le 1er message, il reconnait la carte...)
je sèche !
Dernière modification par alx777 (Le 17/01/2013, à 18:22)
Hors ligne
#8 Le 17/01/2013, à 23:18
- sioc
Re : dell dimension 2400 : activer une autre carte graphique ?
@aix777
Sous la ligne :
Identifier "Configured Monitor"
tu as bien ajouté :
Boardname “ATI Rage 128″
?
Je sèche aussi, pourtant il me semble qu'on est pas loin...
Hors ligne
#9 Le 17/01/2013, à 23:22
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
ah non, je n ai pas fait ça ...
j 'essaye de suite !
Hors ligne
#10 Le 18/01/2013, à 00:40
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
bon, avec ce paramètre en plus, il redémarre avec un écran noir sur le moniteur de l'intel.
(celui sur la carte ATI n'a jamais affiché quoique ce soit...)
mon dernier fichier xorg.conf en date :
# /etc/X11/xorg.conf
Section "Monitor"
Identifier "Configured Monitor"
Boardname "ATI Rage 128"
EndSection
Section "Device"
Identifier "Rage 128 RK/VR"
Driver "r128"
BusID "PCI:01:04.0"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Rage 128 RK/VR"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSectionle Xorg.0.log :
[ 22.891]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 22.896] X Protocol Version 11, Revision 0
[ 22.896] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
[ 22.896] Current Operating System: Linux dell 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686
[ 22.896] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-35-generic root=UUID=8b331964-c4e3-4a5b-96eb-a3095b77adab ro quiet splash vt.handoff=7
[ 22.896] Build Date: 29 August 2012 12:10:05AM
[ 22.896] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 22.896] Current version of pixman: 0.24.4
[ 22.896] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.896] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.897] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 23:42:00 2013
[ 22.898] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.898] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.921] Parse error on line 4 of section Monitor in file /etc/X11/xorg.conf
"Boardname" is not a valid keyword in this section.
[ 22.921] (EE) Problem parsing the config file
[ 22.921] (EE) Error parsing the config file
[ 22.921]
Fatal server error:
[ 22.921] no screens found
[ 22.921]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 22.921] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 22.921]
[ 22.921] ddxSigGiveUp: Closing log
[ 22.922] Server terminated with error (1). Closing log file.je n'ai pas du mettre le "boardname" au bon endroit !
edit:
visiblement il faut le mettre dans la section "Device".
je réessaie ça...
Dernière modification par alx777 (Le 18/01/2013, à 00:43)
Hors ligne
#11 Le 18/01/2013, à 00:54
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
bon, après modification, ça redémarre mais il refuse de faire fonctionner l'ati comme avant.
"no devices detected" après avoir chargé le driver.
Xorg.0.log :
[ 23.715]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 23.716] X Protocol Version 11, Revision 0
[ 23.716] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
[ 23.716] Current Operating System: Linux dell 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686
[ 23.716] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-35-generic root=UUID=8b331964-c4e3-4a5b-96eb-a3095b77adab ro quiet splash vt.handoff=7
[ 23.716] Build Date: 29 August 2012 12:10:05AM
[ 23.716] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 23.716] Current version of pixman: 0.24.4
[ 23.716] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.716] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.717] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 00:48:43 2013
[ 23.718] (==) Using config file: "/etc/X11/xorg.conf"
[ 23.718] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.827] (==) No Layout section. Using the first Screen section.
[ 23.827] (**) |-->Screen "Default Screen" (0)
[ 23.827] (**) | |-->Monitor "Configured Monitor"
[ 23.828] (**) | |-->Device "Rage 128 RK/VR"
[ 23.828] (==) Automatically adding devices
[ 23.828] (==) Automatically enabling devices
[ 23.828] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.829] Entry deleted from font path.
[ 23.829] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.829] Entry deleted from font path.
[ 23.829] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.829] Entry deleted from font path.
[ 23.829] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.829] Entry deleted from font path.
[ 23.829] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.829] Entry deleted from font path.
[ 23.829] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.829] Entry deleted from font path.
[ 23.829] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 23.829] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 23.829] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.829] (II) Loader magic: 0x3fc5a0
[ 23.829] (II) Module ABI versions:
[ 23.829] X.Org ANSI C Emulation: 0.4
[ 23.829] X.Org Video Driver: 11.0
[ 23.830] X.Org XInput driver : 16.0
[ 23.830] X.Org Server Extension : 6.0
[ 23.832] (--) PCI:*(0:0:2:0) 8086:2562:1028:0160 rev 1, Mem @ 0xe8000000/134217728, 0xfeb80000/524288
[ 23.832] (--) PCI: (0:1:4:0) 1002:524b:1002:524c rev 0, Mem @ 0xf8000000/67108864, 0xfe9fc000/16384, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
[ 23.833] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.833] (II) LoadModule: "extmod"
[ 23.865] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.866] (II) Module extmod: vendor="X.Org Foundation"
[ 23.866] compiled for 1.11.3, module version = 1.0.0
[ 23.866] Module class: X.Org Server Extension
[ 23.866] ABI class: X.Org Server Extension, version 6.0
[ 23.866] (II) Loading extension MIT-SCREEN-SAVER
[ 23.866] (II) Loading extension XFree86-VidModeExtension
[ 23.866] (II) Loading extension XFree86-DGA
[ 23.866] (II) Loading extension DPMS
[ 23.866] (II) Loading extension XVideo
[ 23.866] (II) Loading extension XVideo-MotionCompensation
[ 23.866] (II) Loading extension X-Resource
[ 23.866] (II) LoadModule: "dbe"
[ 23.867] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.867] (II) Module dbe: vendor="X.Org Foundation"
[ 23.867] compiled for 1.11.3, module version = 1.0.0
[ 23.867] Module class: X.Org Server Extension
[ 23.871] ABI class: X.Org Server Extension, version 6.0
[ 23.871] (II) Loading extension DOUBLE-BUFFER
[ 23.871] (II) LoadModule: "glx"
[ 23.872] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.873] (II) Module glx: vendor="X.Org Foundation"
[ 23.873] compiled for 1.11.3, module version = 1.0.0
[ 23.873] ABI class: X.Org Server Extension, version 6.0
[ 23.873] (==) AIGLX enabled
[ 23.873] (II) Loading extension GLX
[ 23.873] (II) LoadModule: "record"
[ 23.874] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.874] (II) Module record: vendor="X.Org Foundation"
[ 23.874] compiled for 1.11.3, module version = 1.13.0
[ 23.874] Module class: X.Org Server Extension
[ 23.875] ABI class: X.Org Server Extension, version 6.0
[ 23.875] (II) Loading extension RECORD
[ 23.875] (II) LoadModule: "dri"
[ 23.875] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.885] (II) Module dri: vendor="X.Org Foundation"
[ 23.885] compiled for 1.11.3, module version = 1.0.0
[ 23.885] ABI class: X.Org Server Extension, version 6.0
[ 23.885] (II) Loading extension XFree86-DRI
[ 23.885] (II) LoadModule: "dri2"
[ 23.886] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.886] (II) Module dri2: vendor="X.Org Foundation"
[ 23.886] compiled for 1.11.3, module version = 1.2.0
[ 23.886] ABI class: X.Org Server Extension, version 6.0
[ 23.886] (II) Loading extension DRI2
[ 23.887] (II) LoadModule: "r128"
[ 23.925] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 23.933] (II) Module r128: vendor="X.Org Foundation"
[ 23.933] compiled for 1.11.3, module version = 6.8.1
[ 23.933] Module class: X.Org Video Driver
[ 23.933] ABI class: X.Org Video Driver, version 11.0
[ 23.933] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 23.934] (++) using VT number 7
[ 23.935] (EE) No devices detected.
[ 23.935] (==) Matched intel as autoconfigured driver 0
[ 23.935] (==) Matched vesa as autoconfigured driver 1
[ 23.935] (==) Matched fbdev as autoconfigured driver 2
[ 23.935] (==) Assigned the driver to the xf86ConfigLayout
[ 23.935] (II) LoadModule: "intel"
[ 23.936] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.937] (II) Module intel: vendor="X.Org Foundation"
[ 23.937] compiled for 1.11.3, module version = 2.17.0
[ 23.938] Module class: X.Org Video Driver
[ 23.938] ABI class: X.Org Video Driver, version 11.0
[ 23.938] (II) LoadModule: "vesa"
[ 23.938] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.939] (II) Module vesa: vendor="X.Org Foundation"
[ 23.939] compiled for 1.11.3, module version = 2.3.0
[ 23.939] Module class: X.Org Video Driver
[ 23.939] ABI class: X.Org Video Driver, version 11.0
[ 23.939] (II) LoadModule: "fbdev"
[ 23.949] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.950] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.950] compiled for 1.11.3, module version = 0.4.2
[ 23.950] ABI class: X.Org Video Driver, version 11.0
[ 23.950] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 23.951] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 23.962] (II) VESA: driver for VESA chipsets: vesa
[ 23.962] (II) FBDEV: driver for framebuffer: fbdev
[ 23.962] (++) using VT number 7
[ 23.962] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 23.962] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 23.966] (WW) Falling back to old probe method for vesa
[ 23.966] (WW) Falling back to old probe method for fbdev
[ 23.966] (II) Loading sub module "fbdevhw"
[ 23.966] (II) LoadModule: "fbdevhw"
[ 23.966] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.967] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.967] compiled for 1.11.3, module version = 0.0.2
[ 23.967] ABI class: X.Org Video Driver, version 11.0
[ 23.967] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.967] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.968] (II) FBDEV(0): using default device
[ 23.968] (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32
[ 23.968] (==) FBDEV(0): RGB weight 888
[ 23.968] (==) FBDEV(0): Default visual is TrueColor
[ 23.968] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.968] (II) FBDEV(0): hardware: inteldrmfb (video memory: 5120kB)
[ 23.968] (II) FBDEV(0): checking modes against framebuffer device...
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.969] (II) FBDEV(0): mode "1024x768" test failed
[ 23.969] (II) FBDEV(0): mode "1024x768" not found
[ 23.969] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.970] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.970] (II) FBDEV(0): mode "800x600" test failed
[ 23.971] (II) FBDEV(0): mode "800x600" not found
[ 23.971] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.971] (II) FBDEV(0): mode "640x480" test failed
[ 23.971] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.971] (II) FBDEV(0): mode "640x480" test failed
[ 23.971] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.971] (II) FBDEV(0): mode "640x480" test failed
[ 23.971] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.971] (II) FBDEV(0): mode "640x480" test failed
[ 23.971] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.971] (II) FBDEV(0): mode "640x480" test failed
[ 23.971] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument
[ 23.971] (II) FBDEV(0): mode "640x480" test failed
[ 23.971] (II) FBDEV(0): mode "640x480" not found
[ 23.971] (II) FBDEV(0): checking modes against monitor...
[ 23.971] (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
[ 23.971] (**) FBDEV(0): Built-in mode "current"
[ 23.971] (==) FBDEV(0): DPI set to (96, 96)
[ 23.985] (II) Loading sub module "fb"
[ 23.985] (II) LoadModule: "fb"
[ 23.985] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.986] (II) Module fb: vendor="X.Org Foundation"
[ 23.986] compiled for 1.11.3, module version = 1.0.0
[ 23.986] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.986] (**) FBDEV(0): using shadow framebuffer
[ 23.986] (II) Loading sub module "shadow"
[ 23.986] (II) LoadModule: "shadow"
[ 23.987] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 24.003] (II) Module shadow: vendor="X.Org Foundation"
[ 24.003] compiled for 1.11.3, module version = 1.1.0
[ 24.003] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.003] (II) UnloadModule: "r128"
[ 24.003] (II) Unloading r128
[ 24.003] (II) UnloadModule: "intel"
[ 24.003] (II) Unloading intel
[ 24.003] (II) UnloadModule: "vesa"
[ 24.003] (II) Unloading vesa
[ 24.004] (==) Depth 24 pixmap format is 32 bpp
[ 24.036] (==) FBDEV(0): Backing store disabled
[ 24.036] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.036] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.037] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.038] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.039] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.040] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.041] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.042] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.043] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.044] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.045] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.046] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.047] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.048] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 24.049] (==) FBDEV(0): DPMS enabled
[ 24.050] (==) RandR enabled
[ 24.050] (II) Initializing built-in extension Generic Event Extension
[ 24.050] (II) Initializing built-in extension SHAPE
[ 24.050] (II) Initializing built-in extension MIT-SHM
[ 24.050] (II) Initializing built-in extension XInputExtension
[ 24.050] (II) Initializing built-in extension XTEST
[ 24.050] (II) Initializing built-in extension BIG-REQUESTS
[ 24.050] (II) Initializing built-in extension SYNC
[ 24.050] (II) Initializing built-in extension XKEYBOARD
[ 24.050] (II) Initializing built-in extension XC-MISC
[ 24.050] (II) Initializing built-in extension SECURITY
[ 24.050] (II) Initializing built-in extension XINERAMA
[ 24.050] (II) Initializing built-in extension XFIXES
[ 24.050] (II) Initializing built-in extension RENDER
[ 24.050] (II) Initializing built-in extension RANDR
[ 24.050] (II) Initializing built-in extension COMPOSITE
[ 24.050] (II) Initializing built-in extension DAMAGE
[ 24.068] (II) AIGLX: Screen 0 is not DRI2 capable
[ 24.068] (II) AIGLX: Screen 0 is not DRI capable
[ 24.773] (II) AIGLX: Loaded and initialized swrast
[ 24.773] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 24.797] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 24.806] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.806] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.807] (II) LoadModule: "evdev"
[ 24.808] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.809] (II) Module evdev: vendor="X.Org Foundation"
[ 24.809] compiled for 1.11.3, module version = 2.7.0
[ 24.809] Module class: X.Org XInput Driver
[ 24.809] ABI class: X.Org XInput driver, version 16.0
[ 24.809] (II) Using input driver 'evdev' for 'Power Button'
[ 24.809] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.809] (**) Power Button: always reports core events
[ 24.809] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 24.809] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.810] (--) evdev: Power Button: Found keys
[ 24.810] (II) evdev: Power Button: Configuring as keyboard
[ 24.810] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 24.810] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.810] (**) Option "xkb_rules" "evdev"
[ 24.810] (**) Option "xkb_model" "pc105"
[ 24.810] (**) Option "xkb_layout" "fr"
[ 24.810] (**) Option "xkb_variant" "oss"
[ 24.815] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 24.819] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.819] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.819] (II) Using input driver 'evdev' for 'Power Button'
[ 24.819] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.819] (**) Power Button: always reports core events
[ 24.819] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 24.819] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.819] (--) evdev: Power Button: Found keys
[ 24.819] (II) evdev: Power Button: Configuring as keyboard
[ 24.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 24.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 24.820] (**) Option "xkb_rules" "evdev"
[ 24.820] (**) Option "xkb_model" "pc105"
[ 24.820] (**) Option "xkb_layout" "fr"
[ 24.820] (**) Option "xkb_variant" "oss"
[ 24.822] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/event3)
[ 24.823] (**) Acrox USB & PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 24.823] (II) Using input driver 'evdev' for 'Acrox USB & PS/2 Mouse'
[ 24.823] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.823] (**) Acrox USB & PS/2 Mouse: always reports core events
[ 24.823] (**) evdev: Acrox USB & PS/2 Mouse: Device: "/dev/input/event3"
[ 24.823] (--) evdev: Acrox USB & PS/2 Mouse: Vendor 0xf62 Product 0x1001
[ 24.823] (--) evdev: Acrox USB & PS/2 Mouse: Found 9 mouse buttons
[ 24.823] (--) evdev: Acrox USB & PS/2 Mouse: Found scroll wheel(s)
[ 24.823] (--) evdev: Acrox USB & PS/2 Mouse: Found relative axes
[ 24.823] (--) evdev: Acrox USB & PS/2 Mouse: Found x and y relative axes
[ 24.823] (II) evdev: Acrox USB & PS/2 Mouse: Configuring as mouse
[ 24.823] (II) evdev: Acrox USB & PS/2 Mouse: Adding scrollwheel support
[ 24.823] (**) evdev: Acrox USB & PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 24.824] (**) evdev: Acrox USB & PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3/event3"
[ 24.824] (II) XINPUT: Adding extended input device "Acrox USB & PS/2 Mouse" (type: MOUSE, id 8)
[ 24.824] (II) evdev: Acrox USB & PS/2 Mouse: initialized for relative axes.
[ 24.825] (**) Acrox USB & PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 24.825] (**) Acrox USB & PS/2 Mouse: (accel) acceleration profile 0
[ 24.825] (**) Acrox USB & PS/2 Mouse: (accel) acceleration factor: 2.000
[ 24.825] (**) Acrox USB & PS/2 Mouse: (accel) acceleration threshold: 4
[ 24.826] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/mouse0)
[ 24.826] (II) No input driver specified, ignoring this device.
[ 24.826] (II) This device may have been added with another device file.
[ 24.828] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 24.829] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.829] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.829] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.829] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.829] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 24.829] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.829] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.829] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.829] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 24.829] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 24.829] (**) Option "xkb_rules" "evdev"
[ 24.830] (**) Option "xkb_model" "pc105"
[ 24.830] (**) Option "xkb_layout" "fr"
[ 24.830] (**) Option "xkb_variant" "oss"Dernière modification par alx777 (Le 18/01/2013, à 00:55)
Hors ligne
#12 Le 18/01/2013, à 14:48
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
j'ai fini par faire un Xorg -configure , qui m'a donc généré un fichier xorg.conf (malheureusement pas fonctionnel, le -configure se terminant par un message d'erreur type "number of created screens doesn't match number of detected devices".
j'ai donc édité ce fichier, commenté les screens 1 ,2 et 3, les monitors 1,2 et 3 et la carte intel.
xorg.conf :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
#Screen 2 "Screen2" RightOf "Screen1"
#Screen 3 "Screen3" RightOf "Screen2"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "dri2"
Load "glx"
Load "record"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
#Section "Monitor"
# Identifier "Monitor1"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
#EndSection
#Section "Monitor"
# Identifier "Monitor2"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
#EndSection
#Section "Monitor"
# Identifier "Monitor3"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
#EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CCEPIOMode" # [<bool>]
#Option "CCENoSecurity" # [<bool>]
#Option "CCEusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnablePageFlip" # [<bool>]
#Option "Display" # <str>
#Option "PanelWidth" # <i>
#Option "PanelHeight" # <i>
#Option "ProgramFPRegs" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "ShowCache" # [<bool>]
#Option "VGAAccess" # [<bool>]
Identifier "Card0"
Driver "r128"
BusID "PCI:1:4:0"
EndSection
#Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "DRI" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "FallbackDebug" # [<bool>]
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "Shadow" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
# Identifier "Card1"
# Driver "intel"
# BusID "PCI:0:2:0"
#EndSection
#Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # <str>
#Option "fbdev" # <str>
#Option "debug" # [<bool>]
# Identifier "Card2"
# Driver "fbdev"
# BusID "PCI:1:4:0"
#EndSection
#Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
# Identifier "Card3"
# Driver "vesa"
# BusID "PCI:1:4:0"
#EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
#Section "Screen"
# Identifier "Screen1"
# Device "Card1"
# Monitor "Monitor1"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSection
#Section "Screen"
# Identifier "Screen2"
# Device "Card2"
# Monitor "Monitor2"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSection
#Section "Screen"
# Identifier "Screen3"
# Device "Card3"
# Monitor "Monitor3"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSectionredémarrage , écran noir (moniteur intel, l'autre restant éteint comme d'habitude)
dans le log , il y a un peu de changement :
[ 23.553]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 23.553] X Protocol Version 11, Revision 0
[ 23.553] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
[ 23.553] Current Operating System: Linux dell 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686
[ 23.553] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-35-generic root=UUID=8b331964-c4e3-4a5b-96eb-a3095b77adab ro quiet splash vt.handoff=7
[ 23.554] Build Date: 29 August 2012 12:10:05AM
[ 23.554] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 23.554] Current version of pixman: 0.24.4
[ 23.554] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.554] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.554] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 14:07:03 2013
[ 23.555] (==) Using config file: "/etc/X11/xorg.conf"
[ 23.555] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.583] (==) ServerLayout "X.org Configured"
[ 23.583] (**) |-->Screen "Screen0" (0)
[ 23.584] (**) | |-->Monitor "Monitor0"
[ 23.584] (**) | |-->Device "Card0"
[ 23.584] (**) |-->Input Device "Mouse0"
[ 23.584] (**) |-->Input Device "Keyboard0"
[ 23.584] (==) Automatically adding devices
[ 23.584] (==) Automatically enabling devices
[ 23.585] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.585] Entry deleted from font path.
[ 23.585] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.585] Entry deleted from font path.
[ 23.585] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.585] Entry deleted from font path.
[ 23.585] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.585] Entry deleted from font path.
[ 23.585] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.585] Entry deleted from font path.
[ 23.585] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.585] Entry deleted from font path.
[ 23.586] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.586] Entry deleted from font path.
[ 23.586] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.586] Entry deleted from font path.
[ 23.586] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.586] Entry deleted from font path.
[ 23.586] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.586] Entry deleted from font path.
[ 23.586] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.586] Entry deleted from font path.
[ 23.586] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.586] Entry deleted from font path.
[ 23.586] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 23.586] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 23.586] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 23.586] (WW) Disabling Mouse0
[ 23.586] (WW) Disabling Keyboard0
[ 23.586] (II) Loader magic: 0xe095a0
[ 23.586] (II) Module ABI versions:
[ 23.586] X.Org ANSI C Emulation: 0.4
[ 23.586] X.Org Video Driver: 11.0
[ 23.586] X.Org XInput driver : 16.0
[ 23.587] X.Org Server Extension : 6.0
[ 23.593] (--) PCI:*(0:0:2:0) 8086:2562:1028:0160 rev 1, Mem @ 0xe8000000/134217728, 0xfeb80000/524288
[ 23.593] (--) PCI: (0:1:4:0) 1002:524b:1002:524c rev 0, Mem @ 0xf8000000/67108864, 0xfe9fc000/16384, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
[ 23.594] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.594] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 23.594] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 23.594] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 23.594] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 23.594] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 23.594] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 23.595] (II) LoadModule: "dri"
[ 23.595] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.596] (II) Module dri: vendor="X.Org Foundation"
[ 23.597] compiled for 1.11.3, module version = 1.0.0
[ 23.597] ABI class: X.Org Server Extension, version 6.0
[ 23.597] (II) Loading extension XFree86-DRI
[ 23.597] (II) LoadModule: "extmod"
[ 23.597] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.598] (II) Module extmod: vendor="X.Org Foundation"
[ 23.598] compiled for 1.11.3, module version = 1.0.0
[ 23.598] Module class: X.Org Server Extension
[ 23.598] ABI class: X.Org Server Extension, version 6.0
[ 23.598] (II) Loading extension MIT-SCREEN-SAVER
[ 23.598] (II) Loading extension XFree86-VidModeExtension
[ 23.598] (II) Loading extension XFree86-DGA
[ 23.598] (II) Loading extension DPMS
[ 23.598] (II) Loading extension XVideo
[ 23.598] (II) Loading extension XVideo-MotionCompensation
[ 23.598] (II) Loading extension X-Resource
[ 23.598] (II) LoadModule: "dri2"
[ 23.599] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.599] (II) Module dri2: vendor="X.Org Foundation"
[ 23.599] compiled for 1.11.3, module version = 1.2.0
[ 23.599] ABI class: X.Org Server Extension, version 6.0
[ 23.599] (II) Loading extension DRI2
[ 23.599] (II) LoadModule: "glx"
[ 23.608] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.608] (II) Module glx: vendor="X.Org Foundation"
[ 23.608] compiled for 1.11.3, module version = 1.0.0
[ 23.609] ABI class: X.Org Server Extension, version 6.0
[ 23.609] (==) AIGLX enabled
[ 23.609] (II) Loading extension GLX
[ 23.609] (II) LoadModule: "record"
[ 23.609] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.610] (II) Module record: vendor="X.Org Foundation"
[ 23.610] compiled for 1.11.3, module version = 1.13.0
[ 23.610] Module class: X.Org Server Extension
[ 23.610] ABI class: X.Org Server Extension, version 6.0
[ 23.610] (II) Loading extension RECORD
[ 23.610] (II) LoadModule: "dbe"
[ 23.616] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.616] (II) Module dbe: vendor="X.Org Foundation"
[ 23.616] compiled for 1.11.3, module version = 1.0.0
[ 23.616] Module class: X.Org Server Extension
[ 23.616] ABI class: X.Org Server Extension, version 6.0
[ 23.616] (II) Loading extension DOUBLE-BUFFER
[ 23.616] (II) LoadModule: "r128"
[ 23.631] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 23.714] (II) Module r128: vendor="X.Org Foundation"
[ 23.714] compiled for 1.11.3, module version = 6.8.1
[ 23.714] Module class: X.Org Video Driver
[ 23.714] ABI class: X.Org Video Driver, version 11.0
[ 23.714] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 23.715] (++) using VT number 7
[ 23.715] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 23.716] (II) R128(0): PCI bus 1 card 4 func 0
[ 23.716] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[ 23.716] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.716] (==) R128(0): Default visual is TrueColor
[ 23.716] (II) Loading sub module "vgahw"
[ 23.716] (II) LoadModule: "vgahw"
[ 23.717] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.730] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.730] compiled for 1.11.3, module version = 0.1.0
[ 23.730] ABI class: X.Org Video Driver, version 11.0
[ 23.731] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 23.731] (==) R128(0): RGB weight 888
[ 23.731] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 23.731] (II) Loading sub module "int10"
[ 23.731] (II) LoadModule: "int10"
[ 23.731] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 23.745] (II) Module int10: vendor="X.Org Foundation"
[ 23.745] compiled for 1.11.3, module version = 1.0.0
[ 23.745] ABI class: X.Org Video Driver, version 11.0
[ 23.745] (II) R128(0): initializing int10
[ 23.747] (EE) R128(0): Cannot read V_BIOS (3) Input/output error
[ 23.747] (--) R128(0): Chipset: "ATI Rage 128 VR RK (PCI)" (ChipID = 0x524b)
[ 23.747] (--) R128(0): Linear framebuffer at 0xf8000000
[ 23.747] (--) R128(0): MMIO registers at 0xfe9fc000
[ 23.748] (--) R128(0): VideoRAM: 4194303 kByte (64-bit SDR SGRAM 1:1)
[ 23.748] (**) R128(0): Using external CRT for display
[ 23.749] (WW) R128(0): Failed to read PCI ROM!
[ 23.749] (WW) R128(0): Video BIOS not found!
[ 23.749] (II) R128(0): Primary Display == Type 1
[ 23.749] (WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
[ 23.749] (WW) R128(0): Video BIOS not detected, using default PLL parameters!
[ 23.749] (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=10300
[ 23.749] (II) Loading sub module "ddc"
[ 23.749] (II) LoadModule: "ddc"
[ 23.749] (II) Module "ddc" already built-in
[ 23.749] (II) Loading sub module "vbe"
[ 23.749] (II) LoadModule: "vbe"
[ 23.749] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.753] (II) Module vbe: vendor="X.Org Foundation"
[ 23.753] compiled for 1.11.3, module version = 1.1.0
[ 23.753] ABI class: X.Org Video Driver, version 11.0
[ 23.753] (II) Loading sub module "int10"
[ 23.753] (II) LoadModule: "int10"
[ 23.753] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 23.754] (II) Module int10: vendor="X.Org Foundation"
[ 23.754] compiled for 1.11.3, module version = 1.0.0
[ 23.754] ABI class: X.Org Video Driver, version 11.0
[ 23.754] (II) R128(0): initializing int10
[ 23.755] (EE) R128(0): Cannot read V_BIOS (3) Input/output error
[ 23.755] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.755] (II) R128(0): Monitor0: Using default hsync range of 31.50-48.00 kHz
[ 23.761] (II) R128(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
[ 23.761] (II) R128(0): Monitor0: Using default maximum pixel clock of 65.00 MHz
[ 23.761] (WW) R128(0): Unable to estimate virtual size
[ 23.761] (II) R128(0): Clock range: 12.50 to 250.00 MHz
[ 23.761] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "320x175" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "320x200" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "360x200" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 23.761] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "512x384i" (vrefresh out of range)
[ 23.762] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.762] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.763] (II) R128(0): Not using default mode "1792x1344" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
[ 23.764] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1856x1392" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
[ 23.764] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1920x1440" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 23.764] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "416x312" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.764] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 23.765] (II) R128(0): Not using default mode "1360x768" (mode clock too high)
[ 23.765] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1440x900" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "720x450" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "1600x1024" (hsync out of range)
[ 23.765] (II) R128(0): Not using default mode "800x512" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1920x1080" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "960x540" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1920x1200" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "960x600" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 23.766] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 23.766] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.766] (II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 23.766] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.767] (II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 23.767] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.767] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[ 23.767] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 23.767] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.767] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 23.767] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.767] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 23.767] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.767] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 23.767] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.767] (**) R128(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 23.767] (II) R128(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz)
[ 23.767] (**) R128(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 23.767] (II) R128(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz)
[ 23.767] (**) R128(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 23.772] (II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
[ 23.772] (**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 23.772] (II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
[ 23.772] (**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 23.772] (II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
[ 23.772] (**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[ 23.772] (II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
[ 23.772] (==) R128(0): DPI set to (96, 96)
[ 23.772] (II) Loading sub module "fb"
[ 23.772] (II) LoadModule: "fb"
[ 23.773] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.773] (II) Module fb: vendor="X.Org Foundation"
[ 23.773] compiled for 1.11.3, module version = 1.0.0
[ 23.773] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.773] (II) Loading sub module "ramdac"
[ 23.773] (II) LoadModule: "ramdac"
[ 23.773] (II) Module "ramdac" already built-in
[ 23.773] (II) Loading sub module "xaa"
[ 23.773] (II) LoadModule: "xaa"
[ 23.774] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 23.790] (II) Module xaa: vendor="X.Org Foundation"
[ 23.790] compiled for 1.11.3, module version = 1.2.1
[ 23.790] ABI class: X.Org Video Driver, version 11.0
[ 23.790] (II) Loading sub module "shadowfb"
[ 23.790] (II) LoadModule: "shadowfb"
[ 23.791] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 23.809] (II) Module shadowfb: vendor="X.Org Foundation"
[ 23.809] compiled for 1.11.3, module version = 1.0.0
[ 23.809] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.809] (II) R128(0): Page flipping disabled
[ 23.809] (!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 23.809] (--) Depth 24 pixmap format is 32 bpp
[ 23.810] (EE) R128(0): Unable to map FB aperture. Argument list too long (7)
[ 23.810]
Fatal server error:
[ 23.810] AddScreen/ScreenInit failed for driver 0
[ 23.810]
[ 23.810]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 23.810] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 23.810]
[ 23.890] ddxSigGiveUp: Closing log
[ 23.890] Server terminated with error (1). Closing log file.plusieurs messages d'erreur pour la R128, que je ne sais malheureusement pas interpréter...
Hors ligne
#13 Le 18/01/2013, à 15:44
- alx777
Re : dell dimension 2400 : activer une autre carte graphique ?
bon, je crois bien que malheureusement, ça va se terminer par un retour sous windows... 
Hors ligne