Scan des chaines Terratec Cinergy Tstick RC HD

elekaj34 · Le 30/01/2013, à 14:04

Bonjour,

Voilà j'essaye d'installer ma clef TNT. Au branchement, on me demande d'installer le firmware, ... je m’exécute. Tout semble OK

Le résultat de dmesg

[325616.744016] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[325616.884305] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.1/input/input13
[325616.884412] generic-usb 0003:0CCD:0097.0002: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-2/input1
[325617.008793] IR NEC protocol handler initialized
[325617.035280] IR RC5(x) protocol handler initialized
[325617.076333] IR RC6 protocol handler initialized
[325617.162426] IR JVC protocol handler initialized
[325617.164083] IR Sony protocol handler initialized
[325617.223278] IR MCE Keyboard/mouse protocol handler initialized
[325617.224859] lirc_dev: IR Remote Control driver registered, major 249
[325617.235600] IR LIRC bridge handler initialized
[325617.419582] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[325617.421427] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[325617.421444] dvb_usb_af9015: probe of 2-2:1.0 failed with error -2
[325617.421506] usbcore: registered new interface driver dvb_usb_af9015
[325656.124034] usbcore: deregistering interface driver dvb_usb_af9015
[325656.531593] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[325656.533438] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[325656.601105] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
[325656.601182] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[325656.601624] DVB: registering new adapter (TerraTec Cinergy T Stick RC)
[325656.659214] af9013: firmware version:4.95.0.0
[325656.663091] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[325656.685341] tda18218: NXP TDA18218HN successfully identified.
[325656.740014] Registered IR keymap rc-terratec-slim-2
[325656.740114] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0/input14
[325656.740178] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0
[325656.740181] dvb-usb: schedule remote query interval to 500 msecs.
[325656.740184] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
[325656.748020] usbcore: registered new interface driver dvb_usb_af9015
[326021.358457] usb 2-2: USB disconnect, device number 3
[326021.384954] dvb-usb: TerraTec Cinergy T Stick RC successfully deinitialized and disconnected.
[326041.608025] usb 1-3: new high-speed USB device number 6 using ehci_hcd
[326042.108615] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[326042.110548] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[326042.177615] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
[326042.177668] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[326042.178019] DVB: registering new adapter (TerraTec Cinergy T Stick RC)
[326042.179487] af9013: firmware version:4.95.0.0
[326042.185113] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[326042.187237] tda18218: NXP TDA18218HN successfully identified.
[326042.188741] Registered IR keymap rc-terratec-slim-2
[326042.188819] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/rc/rc1/input15
[326042.188865] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/rc/rc1
[326042.188868] dvb-usb: schedule remote query interval to 500 msecs.
[326042.188872] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
[326042.198078] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.1/input/input16
[326042.198173] generic-usb 0003:0CCD:0097.0003: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1

Et le scan des chaines :

$ w_scan -c FR -L > channels.xspf
w_scan version 20111203 (compiled for DVB API 5.4)
using settings for FRANCE
DVB aerial
DVB-T FR
frontend_type DVB-T, channellist 5
output format vlc xspf playlist
output charset 'UTF-8'
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-T "Afatech AF9013 DVB-T": good :-)
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.4
frontend 'Afatech AF9013 DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
474000: (time: 00:00)
474166: (time: 00:03)
...
698000: (time: 05:56) (time: 05:57) signal ok:
QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999
undefined coderate HP
new transponder:
(QAM_64 f = 4294967 kHz I999B8C999D0T8G8Y0)
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
new transponder:
(QAM_64 f = 4294967 kHz I999B8C999D0T8G32Y0)
undefined coderate HP
undefined coderate HP
698166: skipped (already known transponder)
697834: skipped (already known transponder)
698332: skipped (already known transponder)
698498: skipped (already known transponder)
706000: (time: 06:11) (time: 06:12) signal ok:
QAM_AUTO f = 706000 kHz I999B8C999D999T999G999Y999
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
undefined coderate HP
706166: skipped (already known transponder)
705834: skipped (already known transponder)
706332: skipped (already known transponder)
706498: skipped (already known transponder)
714000: (time: 06:26)
714166: (time: 06:28)
...
858498: (time: 10:25)
tune to: QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999
(time: 10:27) ----------no signal----------
tune to: QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (no signal)
(time: 10:28) ----------no signal----------
tune to: QAM_64 f = 4294967 kHz I999B8C999D0T8G8Y0
(time: 10:29) skipped: (freq 4294967286 unsupported by driver)
tune to: QAM_64 f = 4294967 kHz I999B8C999D0T8G32Y0
(time: 10:29) skipped: (freq 4294967286 unsupported by driver)
tune to: QAM_AUTO f = 706000 kHz I999B8C999D999T999G999Y999
(time: 10:29) ----------no signal----------
tune to: QAM_AUTO f = 706000 kHz I999B8C999D999T999G999Y999 (no signal)
(time: 10:30) ----------no signal----------
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!

Je bute sur cet épineux problème, l'antenne est celle de l'immeuble via la prise murale et non l'antenne intégrée.

Merci pour votre aide

fredthefrenchy · Le 30/01/2013, à 14:31

il semblerait que le firmware ne soit pas sur ton PC.

Tu peux jeter un oeil là dessus : http://doc.ubuntu-fr.org/avermedia_aver … x_usb_a815
et http://doc.ubuntu-fr.org/af9015

Dernière modification par fredthefrenchy (Le 30/01/2013, à 14:59)

elekaj34 · Le 31/01/2013, à 14:25

Bonjour,

Merci pour la réponse, les linux-firmware-nonfree sont bien installés.

J'ai refait une tentative avec w_scan -c FR -L -F -t3 > channels.conf et cela fonctionne. Par contre, VLC ne semble pas capable de lire la TV !!!
Je vais tester avec un autre logiciel pour voir.

Merci

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 30/01/2013, à 14:04

Scan des chaines Terratec Cinergy Tstick RC HD

#2 Le 30/01/2013, à 14:31

Re : Scan des chaines Terratec Cinergy Tstick RC HD

#3 Le 31/01/2013, à 14:25

Re : Scan des chaines Terratec Cinergy Tstick RC HD

Pied de page des forums