Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 03/10/2007, à 20:33

tux4fun

ATI Rage 128+BerylAIGLX->Root visual is not a double buffered GL visua

Bonsoir à tous,

Comment installer Beryl/AIGLX sur une ATI Rage 128?

Ma carte video
id:   
display
description:     VGA compatible controller
product:     Rage 128 RF/SG AGP
vendor:     ATI Technologies Inc
physical id:     
0
bus info:     
pci@01:00.0
version:     00
size:     64MB
width:     32 bits
clock:     66MHz
capabilities:     vga bus_master cap_list
configuration:   
latency    =    32
mingnt    =    8
resources:   
iomemory    :    d0000000-d3ffffff
ioport    :    9000-90ff
iomemory    :    d5000000-d5003fff
irq    :    11

Mon fichier xorg.conf:

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"	# Change to 
							# /dev/input/event
							# for USB
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Carte vidéo générique"
	Driver		"r128"
	BusID		"PCI:1:0:0"
	VideoRam	65536
	Option 		"UseFBDev" 		"false"
	Option 		"SWcursor" 		"true"
	Option 		"ForcePCIMode" 		"true"
	Option     	"RenderAccel"     	"true"
	Option 		"XAANoOffscreenPixmaps"	"true"	
	Option     	"AllowGLXWithComposite" "true"
	Option		"AGPMode"		"4"
	Option		"AGPSize"		"16"
	Option		"RingSize"		"8"
	Option		"BufferSize"		"2"
	Option 		"AGPFastWrite"		"true"
	Option		"EnablePageFlip"	"true"
	Option		"ShowCache"		"true"
	Option		"VGAAccess"		"true"
	Option      	"UseInternalAGPGART" 	"no"
 	Option       	"KernelModuleParm" 	"agplock=0"
	Option 		"mtrr"			"on"
	#Option		"DMAForXv"		"true"
	Option      	"DRI" 			"true"
	Option      	"EnablePageFlip"   	"true"
EndSection

Section "Monitor"
	Identifier	"KX-996"
	Option		"DPMS"
	HorizSync	28-80
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Carte vidéo générique"
	Monitor		"KX-996"
	DefaultDepth	16	
	SubSection "Display"
		Depth		1
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
	Option 		"AIGLX"		"true"
EndSection

Section "DRI"
	Group 	0
	Mode	0666
EndSection

Section "Extensions"

   Option "Composite" "Enable"
EndSection

Voici le résultat de la commande:

beryl --test-only
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Root visual is not a double buffered GL visual

Après des recherches, j'ai trouvé le message suivant pour contourner le pb, enfin j'y croyais :(

http://lists.freedesktop.org/archives/xorg/2007-January/020919.html

Extrait
"I had a patch a while back to default the r128 driver to double
buffered visuals.  It's pretty trivial, just reverse the order the
visuals are filled in in r128_dri.c
change:

         for (db = 0; db <= R128_USE_DB; db++) {

to:

         for (db = R128_USE_DB; db >= 0; db--) {

"

Probléme, je ne localise pas r128_dri.c avec xorg, le retour de la commande locate :

 
$locate r128
/lib/modules/2.6.20-16-generic/kernel/drivers/char/drm/r128.ko
/lib/modules/2.6.20-12-generic/kernel/drivers/char/drm/r128.ko
/usr/lib/xorg/modules/drivers/r128_drv.so
/usr/lib/dri/r128_dri.so
/usr/src/linux-headers-2.6.20-12-generic/include/config/drm/r128.h
/usr/src/linux-headers-2.6.20-16-generic/include/config/drm/r128.h
/usr/share/man/man4/r128.4.gz

Le contenu de mon fichier Xorg.0.log

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux champcar 2.6.20-16-generic #2 SMP Wed May 23 01:46:23 UTC 2007 i686
Build Date: 04 April 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct  3 19:54:18 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "KX-996"
(**) |   |-->Device "Carte vidéo générique"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	/usr/share/fonts/X11/misc,
	/usr/X11R6/lib/X11/fonts/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/X11R6/lib/X11/fonts/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c92e0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.1
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b115 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1102,0002 card 1102,8026 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0d:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 00:11:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:12:0: chip 109e,036e card 11bd,0012 rev 11 class 04,00,00 hdr 80
(II) PCI: 00:12:1: chip 109e,0878 card 11bd,0012 rev 11 class 04,80,00 hdr 80
(II) PCI: 00:14:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 80
(II) PCI: 00:14:1: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 80
(II) PCI: 00:14:2: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 80
(II) PCI: 00:14:3: chip 10b9,5239 card 10b9,5239 rev 01 class 0c,03,20 hdr 80
(II) PCI: 01:00:0: chip 1002,5246 card 1002,0048 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00009000 - 0x000090ff (0x100) IX[b]
	[1] -1	0	0x00009400 - 0x000094ff (0x100) IX[b]
	[2] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[3] -1	0	0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xd4000000 - 0xd5ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI: (0:18:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd7002000/12
(--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 RF/SG AGP rev 0, Mem @ 0xd0000000/26, 0xd5000000/14, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd6000000 from 0xd6ffffff to 0xd5ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xd7007000 - 0xd70070ff (0x100) MX[b]
	[1] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[b]
	[2] -1	0	0xd7005000 - 0xd7005fff (0x1000) MX[b]
	[3] -1	0	0xd7004000 - 0xd7004fff (0x1000) MX[b]
	[4] -1	0	0xd7003000 - 0xd7003fff (0x1000) MX[b]
	[5] -1	0	0xd7001000 - 0xd70010ff (0x100) MX[b]
	[6] -1	0	0xd7000000 - 0xd70000ff (0x100) MX[b]
	[7] -1	0	0xd6000000 - 0xd5ffffff (0x0) MX[b]O
	[8] -1	0	0xd5000000 - 0xd5003fff (0x4000) MX[b](B)
	[9] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
	[10] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[b](B)
	[11] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[12] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[13] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[b]
	[14] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[15] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[b]
	[16] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[b]
	[17] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[18] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xd7007000 - 0xd70070ff (0x100) MX[b]
	[1] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[b]
	[2] -1	0	0xd7005000 - 0xd7005fff (0x1000) MX[b]
	[3] -1	0	0xd7004000 - 0xd7004fff (0x1000) MX[b]
	[4] -1	0	0xd7003000 - 0xd7003fff (0x1000) MX[b]
	[5] -1	0	0xd7001000 - 0xd70010ff (0x100) MX[b]
	[6] -1	0	0xd7000000 - 0xd70000ff (0x100) MX[b]
	[7] -1	0	0xd6000000 - 0xd5ffffff (0x0) MX[b]O
	[8] -1	0	0xd5000000 - 0xd5003fff (0x4000) MX[b](B)
	[9] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
	[10] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[b](B)
	[11] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[12] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[13] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[b]
	[14] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[15] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[b]
	[16] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[b]
	[17] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[18] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xd7007000 - 0xd70070ff (0x100) MX[b]
	[5] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[b]
	[6] -1	0	0xd7005000 - 0xd7005fff (0x1000) MX[b]
	[7] -1	0	0xd7004000 - 0xd7004fff (0x1000) MX[b]
	[8] -1	0	0xd7003000 - 0xd7003fff (0x1000) MX[b]
	[9] -1	0	0xd7001000 - 0xd70010ff (0x100) MX[b]
	[10] -1	0	0xd7000000 - 0xd70000ff (0x100) MX[b]
	[11] -1	0	0xd6000000 - 0xd5ffffff (0x0) MX[b]O
	[12] -1	0	0xd5000000 - 0xd5003fff (0x4000) MX[b](B)
	[13] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
	[14] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[b](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[17] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[18] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[19] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[b]
	[20] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[21] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[b]
	[22] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[b]
	[23] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[24] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules//libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.2.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 4.1.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 6.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) Wacom driver level: 47-0.7.7-7 $
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
	ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
	ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
	ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
	ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
	ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
	ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
	ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
	ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
	ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
	ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Rage 128 GL RF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xd7007000 - 0xd70070ff (0x100) MX[b]
	[5] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[b]
	[6] -1	0	0xd7005000 - 0xd7005fff (0x1000) MX[b]
	[7] -1	0	0xd7004000 - 0xd7004fff (0x1000) MX[b]
	[8] -1	0	0xd7003000 - 0xd7003fff (0x1000) MX[b]
	[9] -1	0	0xd7001000 - 0xd70010ff (0x100) MX[b]
	[10] -1	0	0xd7000000 - 0xd70000ff (0x100) MX[b]
	[11] -1	0	0xd6000000 - 0xd5ffffff (0x0) MX[b]O
	[12] -1	0	0xd5000000 - 0xd5003fff (0x4000) MX[b](B)
	[13] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
	[14] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[b](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[17] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[18] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[19] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[b]
	[20] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[21] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[b]
	[22] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[b]
	[23] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[24] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xd7007000 - 0xd70070ff (0x100) MX[b]
	[5] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[b]
	[6] -1	0	0xd7005000 - 0xd7005fff (0x1000) MX[b]
	[7] -1	0	0xd7004000 - 0xd7004fff (0x1000) MX[b]
	[8] -1	0	0xd7003000 - 0xd7003fff (0x1000) MX[b]
	[9] -1	0	0xd7001000 - 0xd70010ff (0x100) MX[b]
	[10] -1	0	0xd7000000 - 0xd70000ff (0x100) MX[b]
	[11] -1	0	0xd6000000 - 0xd5ffffff (0x0) MX[b]O
	[12] -1	0	0xd5000000 - 0xd5003fff (0x4000) MX[b](B)
	[13] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
	[14] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[b](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[20] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[21] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[22] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[b]
	[23] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[24] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[b]
	[25] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[b]
	[26] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[27] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
	[28] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[29] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "SWcursor" "true"
(**) R128(0): Option "ForcePCIMode" "true"
(**) R128(0): Option "AGPMode" "4"
(**) R128(0): Option "AGPSize" "16"
(**) R128(0): Option "RingSize" "8"
(**) R128(0): Option "BufferSize" "2"
(**) R128(0): Option "EnablePageFlip" "true"
(**) R128(0): Option "UseFBDev" "false"
(**) R128(0): Option "ShowCache" "true"
(**) R128(0): Option "VGAAccess" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.1
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(**) R128(0): ShowCache enabled
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) R128(0): initializing int10
(II) Loading sub module "vm86"
(II) LoadModule: "vm86"
(II) Loading /usr/lib/xorg/modules//libvm86.so
(II) Module vm86: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) R128(0): Primary V_BIOS segment is: 0xc000
(**) R128(0): Option "mtrr" "on"
(--) R128(0): Chipset: "ATI Rage 128 GL RF (AGP)" (ChipID = 0x5246)
(--) R128(0): Linear framebuffer at 0xd0000000
(--) R128(0): MMIO registers at 0xd5000000
(II) R128(0): Video RAM override, using 16384 kB instead of 16384 kB
(**) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(**) R128(0): Forced into PCI-only mode
(II) R128(0): Primary Display == Type 1
(WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=9000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 16384 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level 2
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read successfully
(II) R128(0): Manufacturer: PTS  Model: 3e4  Serial#: 273914
(II) R128(0): Year: 2003  Week: 53
(II) R128(0): EDID Version: 1.3
(II) R128(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) R128(0): Sync:  Separate
(II) R128(0): Max H-Image Size [cm]: horiz.: 36  vert.: 27
(II) R128(0): Gamma: 1.27
(II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) R128(0): First detailed timing not preferred mode in violation of standard!(II) R128(0): redX: 0.618 redY: 0.349   greenX: 0.280 greenY: 0.605
(II) R128(0): blueX: 0.152 blueY: 0.063   whiteX: 0.281 whiteY: 0.310
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 720x400@70Hz
(II) R128(0): 640x480@60Hz
(II) R128(0): 800x600@75Hz
(II) R128(0): 1024x768@75Hz
(II) R128(0): 1280x1024@75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) R128(0): #1: hsize: 640  vsize 480  refresh: 100  vid: 26673
(II) R128(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) R128(0): #3: hsize: 800  vsize 600  refresh: 100  vid: 26693
(II) R128(0): #4: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) R128(0): #5: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) R128(0): #6: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 36.0 MHz   Image Size:  350 x 260 mm
(II) R128(0): h_active: 640  h_sync: 696  h_sync_end 752 h_blank_end 832 h_border: 0
(II) R128(0): v_active: 480  v_sync: 481  v_sync_end 484 v_blanking: 509 v_border: 0
(II) R128(0): Monitor name: KX-996
(II) R128(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 98 kHz, PixClock max 210 MHz
(II) R128(0): Serial No: FEEJ3C0273914
(II) R128(0): EDID (in hex):
(II) R128(0): 	00ffffffffffff004293e403fa2d0400
(II) R128(0): 	350d010308241b1be85c119e59479b27
(II) R128(0): 	10484fa0430031593168455945686159
(II) R128(0): 	8199a94f0101100e80c020e01d103838
(II) R128(0): 	13005e0411000018000000fc004b582d
(II) R128(0): 	3939360a202020202020000000fd0032
(II) R128(0): 	a01e6215000a202020202020000000ff
(II) R128(0): 	004645454a334330323733393134005e
(II) R128(0): Using hsync ranges from config file
(II) R128(0): Using vrefresh ranges from config file
(II) R128(0): Printing DDC gathered Modelines:
(II) R128(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(II) R128(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 449 -hsync +vsync
(II) R128(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(II) R128(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(II) R128(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(II) R128(0): Modeline "640x480"   35.00  640 664 728 816  480 483 487 507 -hsync +vsync
(II) R128(0): Modeline "640x480"   42.50  640 672 736 832  480 483 487 512 -hsync +vsync
(II) R128(0): Modeline "800x600"   56.75  800 848 928 1056  600 603 607 633 -hsync +vsync
(II) R128(0): Modeline "800x600"   67.25  800 848 928 1056  600 603 607 639 -hsync +vsync
(II) R128(0): Modeline "1024x768"   94.50  1024 1096 1200 1376  768 771 775 809 -hsync +vsync
(II) R128(0): Modeline "1280x1024"  159.50  1280 1376 1512 1744  1024 1027 1034 1078 -hsync +vsync
(II) R128(0): Modeline "1600x1200"  204.75  1600 1720 1888 2176  1200 1203 1207 1255 -hsync +vsync
(II) R128(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): KX-996: Using hsync range of 28.00-80.00 kHz
(II) R128(0): KX-996: Using vrefresh range of 43.00-60.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (vrefresh out of range)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (vrefresh out of range)
(II) R128(0): Not using default mode "720x400" (vrefresh out of range)
(II) R128(0): Not using default mode "360x200" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (vrefresh out of range)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (vrefresh out of range)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (vrefresh out of range)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "512x384" (vrefresh out of range)
(II) R128(0): Not using default mode "1152x864" (vrefresh out of range)
(II) R128(0): Not using default mode "576x432" (vrefresh out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) R128(0): Not using default mode "640x512" (vrefresh out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "832x624" (vrefresh out of range)
(II) R128(0): Not using default mode "416x312" (vrefresh out of range)
(II) R128(0): Not using default mode "1152x864" (vrefresh out of range)
(II) R128(0): Not using default mode "576x432" (vrefresh out of range)
(II) R128(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) R128(0): Not using default mode "700x525" (vrefresh out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using driver mode "720x400" (vrefresh out of range)
(II) R128(0): Not using driver mode "1280x1024" (vrefresh out of range)
(II) R128(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using driver mode "800x600" (vrefresh out of range)
(II) R128(0): Not using driver mode "640x480" (vrefresh out of range)
(II) R128(0): Not using driver mode "640x480" (vrefresh out of range)
(II) R128(0): Not using driver mode "800x600" (vrefresh out of range)
(II) R128(0): Not using driver mode "800x600" (vrefresh out of range)
(II) R128(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using driver mode "1280x1024" (hsync out of range)
(II) R128(0): Not using driver mode "1600x1200" (hsync out of range)
(II) R128(0): Not using driver mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) R128(0): Not using default mode "1680x1050" (width too large for virtual size)
(--) R128(0): Virtual size is 1600x1200 (pitch 1600)
(**) R128(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1600x1200"  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) R128(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) R128(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) R128(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) R128(0):  Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) R128(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync
(**) R128(0):  Default mode "1440x900": 108.8 MHz, 56.9 kHz, 60.2 Hz
(II) R128(0): Modeline "1440x900"  108.84  1440 1472 1880 1912  900 918 927 946 +hsync +vsync
(**) R128(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) R128(0):  Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x800"   83.46  1280 1344 1480 1680  800 801 804 828
(**) R128(0):  Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x768"   80.14  1280 1344 1480 1680  768 769 772 795
(**) R128(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) R128(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) R128(0):  Default mode "960x600": 96.6 MHz, 74.5 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "960x600"   96.58  960 1024 1128 1296  600 600 602 621 doublescan
(**) R128(0):  Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "800x600"   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) R128(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) R128(0):  Default mode "840x525": 73.6 MHz, 65.2 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "840x525"   73.57  840 892 984 1128  525 525 527 543 doublescan
(**) R128(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) R128(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) R128(0):  Default mode "720x450": 54.4 MHz, 56.9 kHz, 60.2 Hz (D)
(II) R128(0): Modeline "720x450"   54.42  720 736 940 956  450 459 463 473 doublescan +hsync +vsync
(**) R128(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) R128(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 -hsync -vsync
(**) R128(0):  Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x400"   41.73  640 672 740 840  400 400 402 414 doublescan
(**) R128(0):  Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "640x384"   40.07  640 672 740 840  384 384 386 397 doublescan
(**) R128(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) R128(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) R128(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) R128(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) R128(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) R128(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) R128(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) R128(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "320x240"   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) R128(0): Display dimensions: (360, 270) mm
(**) R128(0): DPI set to (112, 112)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.1
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping enabled
(!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd5000000 - 0xd5003fff (0x4000) MS[b]
	[1] 0	0	0xd0000000 - 0xd3ffffff (0x4000000) MS[b]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[6] -1	0	0xd7007000 - 0xd70070ff (0x100) MX[b]
	[7] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[b]
	[8] -1	0	0xd7005000 - 0xd7005fff (0x1000) MX[b]
	[9] -1	0	0xd7004000 - 0xd7004fff (0x1000) MX[b]
	[10] -1	0	0xd7003000 - 0xd7003fff (0x1000) MX[b]
	[11] -1	0	0xd7001000 - 0xd70010ff (0x100) MX[b]
	[12] -1	0	0xd7000000 - 0xd70000ff (0x100) MX[b]
	[13] -1	0	0xd6000000 - 0xd5ffffff (0x0) MX[b]O
	[14] -1	0	0xd5000000 - 0xd5003fff (0x4000) MX[b](B)
	[15] -1	0	0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
	[16] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[b](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
	[20] 0	0	0x00009000 - 0x000090ff (0x100) IS[b]
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[23] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[24] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[25] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[b]
	[26] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[b]
	[27] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[b]
	[28] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[b]
	[29] -1	0	0x0000a000 - 0x0000a00f (0x10) IX[b]
	[30] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
	[31] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
	[32] 0	0	0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(**) R128(0): Write-combining range (0xd0000000,0x1000000)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) R128(0): [drm] DRM interface version 1.3
(II) R128(0): [drm] created "r128" driver at busid "pci:0000:01:00.0"
(II) R128(0): [drm] added 8192 byte SAREA at 0xea225000
(II) R128(0): [drm] mapped SAREA 0xea225000 to 0xb7b7e000
(II) R128(0): [drm] framebuffer handle = 0xd0000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): [pci] 8192 kB allocated with handle 0xea280000
(II) R128(0): [pci] ring handle = 0xea280000
(II) R128(0): [pci] Ring mapped at 0xb6955000
(II) R128(0): [pci] Ring contents 0x00000000
(II) R128(0): [pci] ring read ptr handle = 0xea381000
(II) R128(0): [pci] Ring read ptr mapped at 0xb7c53000
(II) R128(0): [pci] Ring read ptr contents 0x00000000
(II) R128(0): [pci] vertex/indirect buffers handle = 0xea382000
(II) R128(0): [pci] Vertex/indirect buffers mapped at 0xb6755000
(II) R128(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) R128(0): [drm] register handle = 0xd5000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 1 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1600,4812)
(II) R128(0): Reserved area from (0,1200) to (1600,1202)
(II) R128(0): Largest offscreen area available: 1600 x 3610
(II) R128(0): Reserved back buffer from (0,1202) to (1600,2402)
(II) R128(0): Reserved depth buffer from (0,2402) to (1600,3603)
(II) R128(0): Reserved depth span from (0,3602) offset 0xafe100
(II) R128(0): Reserved 1344 kb for textures at offset 0xeaf600
(**) R128(0): Option "XaaNoOffscreenPixmaps" "true"
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		19 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using software cursor
(**) Option "dpms"
(**) R128(0): DPMS enabled
(WW) R128(0): Option "RenderAccel" is not used
(WW) R128(0): Option "AllowGLXWithComposite" is not used
(WW) R128(0): Option "AGPFastWrite" is not used
(WW) R128(0): Option "UseInternalAGPGART" is not used
(WW) R128(0): Option "KernelModuleParm" is not used
(WW) R128(0): Option "DRI" is not used
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 11
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbVariant" "oss"
(**) Generic Keyboard: XkbVariant: "oss"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Success
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!

Merci par avance pour vos suggestions et reflexions.

Dernière modification par tux4fun (Le 03/10/2007, à 21:32)

tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#2 Le 09/10/2007, à 20:18

tux4fun

Re : ATI Rage 128+BerylAIGLX->Root visual is not a double buffered GL visua

Un p'tit coup main svp ?

tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#3 Le 12/10/2007, à 13:18

tux4fun

Re : ATI Rage 128+BerylAIGLX->Root visual is not a double buffered GL visua

+1
Un p'tit coup main svp ?

tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne

#4 Le 17/10/2007, à 18:16

mollig

Re : ATI Rage 128+BerylAIGLX->Root visual is not a double buffered GL visua

Bonjour,

J'ai le même genre de carte : "Rage 128 Pro Ultra TF" 16Mo et le même problème.

Quelqu'un a-t-il réussi à avoir un bureau 3D avec, ou bien cette carte est trop ancienne ?

Faut-il acheter une nouvelle carte simplement pour avoir les effets 3D sur le bureau ?

Merci !

Hors ligne

Pages : 1