#1 Le 05/02/2013, à 18:55
- Bat_Tuc
GE Force 210 Gainward Installation drivers impossible
Bonjour a tous,
Suite a l'achat d'un deuxieme ecran, j'ai du changer ma CG, j'ai donc opter pour une GE Force 210 de chez Nvidia.
Or lors du boot sur ubuntu il semblerait que cette derniere ne soit pas reconnu: impossible de mettre la résolution que je souhaite et clignotement sur mon écran ( qui fonctionne tres bien sous w$)
j'ai donc télécharger le drivers NVIDIA-Linux-x86_64-310.32.run
et lorsque j'y applique un sh il decompresse correctement le fichier puis: "
ERROR: You appear to be running an X server; please exit X before
installing. For further details, please see the section INSTALLING
THE NVIDIA DRIVER in the README available on the Linux driver
download page at www.nvidia.com.
"
je ne comprends pas tres bien, d'apres moi il me dit qu'il semble que je trouve sur un X-serveur " késako" ?! Je n'ai pas trouve le dit README sur le site de nvidia.
Concernant les fichiers conf
/etc/X11/xorg.conf n'existe pas.
/var/log/Xorg.0.log
[ 30.330]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 30.330] X Protocol Version 11, Revision 0
[ 30.330] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
[ 30.330] Current Operating System: Linux ubuntu 3.5.0-23-generic #35-Ubuntu SMP Thu Jan 24 13:15:40 UTC 2013 x86_64
[ 30.330] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=128C01A18C018089 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
[ 30.330] Build Date: 27 November 2012 07:44:35AM
[ 30.330] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
[ 30.330] Current version of pixman: 0.26.0
[ 30.330] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.330] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.330] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 5 17:30:17 2013
[ 30.396] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.397] (==) No Layout section. Using the first Screen section.
[ 30.397] (==) No screen section available. Using defaults.
[ 30.397] (**) |-->Screen "Default Screen Section" (0)
[ 30.397] (**) | |-->Monitor "<default monitor>"
[ 30.397] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.397] (==) Automatically adding devices
[ 30.397] (==) Automatically enabling devices
[ 30.397] (==) Automatically adding GPU devices
[ 30.397] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.397] Entry deleted from font path.
[ 30.397] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 30.397] Entry deleted from font path.
[ 30.397] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 30.397] Entry deleted from font path.
[ 30.397] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 30.397] Entry deleted from font path.
[ 30.397] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 30.397] Entry deleted from font path.
[ 30.397] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 30.397] Entry deleted from font path.
[ 30.397] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 30.397] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 30.397] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.397] (II) Loader magic: 0x7ff797034c40
[ 30.397] (II) Module ABI versions:
[ 30.397] X.Org ANSI C Emulation: 0.4
[ 30.397] X.Org Video Driver: 13.0
[ 30.397] X.Org XInput driver : 18.0
[ 30.397] X.Org Server Extension : 7.0
[ 30.397] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 30.399] (--) PCI:*(0:1:0:0) 10de:0a65:10b0:1401 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000c800/128, BIOS @ 0x????????/524288
[ 30.400] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.400] Initializing built-in extension Generic Event Extension
[ 30.400] Initializing built-in extension SHAPE
[ 30.400] Initializing built-in extension MIT-SHM
[ 30.400] Initializing built-in extension XInputExtension
[ 30.400] Initializing built-in extension XTEST
[ 30.400] Initializing built-in extension BIG-REQUESTS
[ 30.400] Initializing built-in extension SYNC
[ 30.400] Initializing built-in extension XKEYBOARD
[ 30.400] Initializing built-in extension XC-MISC
[ 30.400] Initializing built-in extension SECURITY
[ 30.400] Initializing built-in extension XINERAMA
[ 30.400] Initializing built-in extension XFIXES
[ 30.400] Initializing built-in extension RENDER
[ 30.400] Initializing built-in extension RANDR
[ 30.400] Initializing built-in extension COMPOSITE
[ 30.400] Initializing built-in extension DAMAGE
[ 30.400] Initializing built-in extension MIT-SCREEN-SAVER
[ 30.400] Initializing built-in extension DOUBLE-BUFFER
[ 30.400] Initializing built-in extension RECORD
[ 30.400] Initializing built-in extension DPMS
[ 30.400] Initializing built-in extension X-Resource
[ 30.400] Initializing built-in extension XVideo
[ 30.400] Initializing built-in extension XVideo-MotionCompensation
[ 30.400] Initializing built-in extension XFree86-VidModeExtension
[ 30.400] Initializing built-in extension XFree86-DGA
[ 30.400] Initializing built-in extension XFree86-DRI
[ 30.400] Initializing built-in extension DRI2
[ 30.400] (II) LoadModule: "glx"
[ 30.445] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 30.445] (II) Module glx: vendor="X.Org Foundation"
[ 30.445] compiled for 1.13.0, module version = 1.0.0
[ 30.445] ABI class: X.Org Server Extension, version 7.0
[ 30.445] (==) AIGLX enabled
[ 30.445] Loading extension GLX
[ 30.445] (==) Matched nvidia as autoconfigured driver 0
[ 30.445] (==) Matched nouveau as autoconfigured driver 1
[ 30.445] (==) Matched nv as autoconfigured driver 2
[ 30.445] (==) Matched nvidia as autoconfigured driver 3
[ 30.445] (==) Matched nouveau as autoconfigured driver 4
[ 30.445] (==) Matched nv as autoconfigured driver 5
[ 30.445] (==) Matched vesa as autoconfigured driver 6
[ 30.445] (==) Matched modesetting as autoconfigured driver 7
[ 30.445] (==) Matched fbdev as autoconfigured driver 8
[ 30.445] (==) Assigned the driver to the xf86ConfigLayout
[ 30.445] (II) LoadModule: "nvidia"
[ 30.446] (WW) Warning, couldn't open module nvidia
[ 30.446] (II) UnloadModule: "nvidia"
[ 30.446] (II) Unloading nvidia
[ 30.446] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 30.446] (II) LoadModule: "nouveau"
[ 30.446] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.446] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.446] compiled for 1.13.0, module version = 1.0.2
[ 30.446] Module class: X.Org Video Driver
[ 30.446] ABI class: X.Org Video Driver, version 13.0
[ 30.446] (II) LoadModule: "nv"
[ 30.446] (WW) Warning, couldn't open module nv
[ 30.446] (II) UnloadModule: "nv"
[ 30.446] (II) Unloading nv
[ 30.446] (EE) Failed to load module "nv" (module does not exist, 0)
[ 30.446] (II) LoadModule: "vesa"
[ 30.446] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.446] (II) Module vesa: vendor="X.Org Foundation"
[ 30.446] compiled for 1.12.99.902, module version = 2.3.2
[ 30.446] Module class: X.Org Video Driver
[ 30.446] ABI class: X.Org Video Driver, version 13.0
[ 30.446] (II) LoadModule: "modesetting"
[ 30.446] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.446] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.446] compiled for 1.13.0, module version = 0.5.0
[ 30.446] Module class: X.Org Video Driver
[ 30.447] ABI class: X.Org Video Driver, version 13.0
[ 30.447] (II) LoadModule: "fbdev"
[ 30.447] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.447] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.447] compiled for 1.12.99.902, module version = 0.4.3
[ 30.447] Module class: X.Org Video Driver
[ 30.447] ABI class: X.Org Video Driver, version 13.0
[ 30.447] (==) Matched nvidia as autoconfigured driver 0
[ 30.447] (==) Matched nouveau as autoconfigured driver 1
[ 30.447] (==) Matched nv as autoconfigured driver 2
[ 30.447] (==) Matched nvidia as autoconfigured driver 3
[ 30.447] (==) Matched nouveau as autoconfigured driver 4
[ 30.447] (==) Matched nv as autoconfigured driver 5
[ 30.447] (==) Matched vesa as autoconfigured driver 6
[ 30.447] (==) Matched modesetting as autoconfigured driver 7
[ 30.447] (==) Matched fbdev as autoconfigured driver 8
[ 30.447] (==) Assigned the driver to the xf86ConfigLayout
[ 30.447] (II) LoadModule: "nvidia"
[ 30.447] (WW) Warning, couldn't open module nvidia
[ 30.447] (II) UnloadModule: "nvidia"
[ 30.447] (II) Unloading nvidia
[ 30.447] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 30.447] (II) LoadModule: "nouveau"
[ 30.447] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.447] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.447] compiled for 1.13.0, module version = 1.0.2
[ 30.447] Module class: X.Org Video Driver
[ 30.447] ABI class: X.Org Video Driver, version 13.0
[ 30.447] (II) UnloadModule: "nouveau"
[ 30.447] (II) Unloading nouveau
[ 30.447] (II) Failed to load module "nouveau" (already loaded, 0)
[ 30.447] (II) LoadModule: "nv"
[ 30.447] (WW) Warning, couldn't open module nv
[ 30.447] (II) UnloadModule: "nv"
[ 30.447] (II) Unloading nv
[ 30.447] (EE) Failed to load module "nv" (module does not exist, 0)
[ 30.447] (II) LoadModule: "vesa"
[ 30.447] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.447] (II) Module vesa: vendor="X.Org Foundation"
[ 30.448] compiled for 1.12.99.902, module version = 2.3.2
[ 30.448] Module class: X.Org Video Driver
[ 30.448] ABI class: X.Org Video Driver, version 13.0
[ 30.448] (II) UnloadModule: "vesa"
[ 30.448] (II) Unloading vesa
[ 30.448] (II) Failed to load module "vesa" (already loaded, 0)
[ 30.448] (II) LoadModule: "modesetting"
[ 30.448] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.448] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.448] compiled for 1.13.0, module version = 0.5.0
[ 30.448] Module class: X.Org Video Driver
[ 30.448] ABI class: X.Org Video Driver, version 13.0
[ 30.448] (II) UnloadModule: "modesetting"
[ 30.448] (II) Unloading modesetting
[ 30.448] (II) Failed to load module "modesetting" (already loaded, 0)
[ 30.448] (II) LoadModule: "fbdev"
[ 30.448] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.448] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.448] compiled for 1.12.99.902, module version = 0.4.3
[ 30.448] Module class: X.Org Video Driver
[ 30.448] ABI class: X.Org Video Driver, version 13.0
[ 30.448] (II) UnloadModule: "fbdev"
[ 30.448] (II) Unloading fbdev
[ 30.448] (II) Failed to load module "fbdev" (already loaded, 0)
[ 30.448] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200
[ 30.448] (II) NOUVEAU driver for NVIDIA chipset families :
[ 30.448] RIVA TNT (NV04)
[ 30.448] RIVA TNT2 (NV05)
[ 30.448] GeForce 256 (NV10)
[ 30.448] GeForce 2 (NV11, NV15)
[ 30.448] GeForce 4MX (NV17, NV18)
[ 30.448] GeForce 3 (NV20)
[ 30.448] GeForce 4Ti (NV25, NV28)
[ 30.448] GeForce FX (NV3x)
[ 30.448] GeForce 6 (NV4x)
[ 30.448] GeForce 7 (G7x)
[ 30.448] GeForce 8 (G8x)
[ 30.448] GeForce GTX 200 (NVA0)
[ 30.448] GeForce GTX 400 (NVC0)
[ 30.448] (II) VESA: driver for VESA chipsets: vesa
[ 30.448] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.448] (II) FBDEV: driver for framebuffer: fbdev
[ 30.448] (++) using VT number 7
[ 30.448] (WW) Falling back to old probe method for vesa
[ 30.448] (WW) Falling back to old probe method for modesetting
[ 30.449] (WW) Falling back to old probe method for fbdev
[ 30.449] (II) Loading sub module "fbdevhw"
[ 30.449] (II) LoadModule: "fbdevhw"
[ 30.449] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 30.449] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 30.449] compiled for 1.13.0, module version = 0.0.2
[ 30.449] ABI class: X.Org Video Driver, version 13.0
[ 30.449] (II) Loading sub module "dri"
[ 30.449] (II) LoadModule: "dri"
[ 30.449] (II) Module "dri" already built-in
[ 30.449] (II) NOUVEAU(0): Loaded DRI module
[ 30.449] (II) [drm] DRM interface version 1.4
[ 30.449] (II) [drm] DRM open master succeeded.
[ 30.449] (--) NOUVEAU(0): Chipset: "NVIDIA NVa8"
[ 30.449] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.449] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 30.449] (==) NOUVEAU(0): RGB weight 888
[ 30.449] (==) NOUVEAU(0): Default visual is TrueColor
[ 30.449] (==) NOUVEAU(0): Using HW cursor
[ 30.449] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 30.449] (==) NOUVEAU(0): Page flipping enabled
[ 30.449] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 30.507] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 30.509] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 30.536] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 30.583] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 30.583] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 30.583] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.583] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.583] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.583] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 30.583] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 30.585] (II) NOUVEAU(0): EDID for output HDMI-1
[ 30.613] (II) NOUVEAU(0): EDID for output VGA-1
[ 30.613] (II) NOUVEAU(0): Manufacturer: GSM Model: 58be Serial#: 184256
[ 30.613] (II) NOUVEAU(0): Year: 2012 Week: 9
[ 30.613] (II) NOUVEAU(0): EDID Version: 1.3
[ 30.613] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 30.613] (II) NOUVEAU(0): Sync: Separate Composite
[ 30.613] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 30.613] (II) NOUVEAU(0): Gamma: 2.20
[ 30.613] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 30.613] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 30.613] (II) NOUVEAU(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[ 30.613] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[ 30.613] (II) NOUVEAU(0): Supported established timings:
[ 30.613] (II) NOUVEAU(0): 720x400@70Hz
[ 30.613] (II) NOUVEAU(0): 640x480@60Hz
[ 30.613] (II) NOUVEAU(0): 640x480@75Hz
[ 30.613] (II) NOUVEAU(0): 800x600@60Hz
[ 30.613] (II) NOUVEAU(0): 800x600@75Hz
[ 30.613] (II) NOUVEAU(0): 1024x768@60Hz
[ 30.613] (II) NOUVEAU(0): 1024x768@75Hz
[ 30.613] (II) NOUVEAU(0): 1280x1024@75Hz
[ 30.613] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 30.613] (II) NOUVEAU(0): Supported standard timings:
[ 30.613] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 30.613] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 30.613] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 30.613] (II) NOUVEAU(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 30.613] (II) NOUVEAU(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 30.613] (II) NOUVEAU(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 30.613] (II) NOUVEAU(0): #6: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 30.613] (II) NOUVEAU(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 30.613] (II) NOUVEAU(0): Supported detailed timing:
[ 30.613] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 30.613] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 30.613] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 30.613] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 30.613] (II) NOUVEAU(0): Monitor name: E2242
[ 30.613] (II) NOUVEAU(0): Serial No: 209NDLS5E256
[ 30.613] (II) NOUVEAU(0): EDID (in hex):
[ 30.613] (II) NOUVEAU(0): 00ffffffffffff001e6dbe58c0cf0200
[ 30.613] (II) NOUVEAU(0): 091601036c301b78ea9535a159579f27
[ 30.613] (II) NOUVEAU(0): 0e5054a54b00714f81809500a9c08100
[ 30.613] (II) NOUVEAU(0): 81c09040b300023a801871382d40582c
[ 30.613] (II) NOUVEAU(0): 4500dd0c1100001e000000fd00384b1e
[ 30.613] (II) NOUVEAU(0): 530f000a202020202020000000fc0045
[ 30.613] (II) NOUVEAU(0): 323234320a20202020202020000000ff
[ 30.613] (II) NOUVEAU(0): 003230394e444c5335453235360a009b
[ 30.613] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 30.613] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 30.613] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 30.613] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 30.613] (II) NOUVEAU(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 30.613] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 30.613] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.613] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30.613] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 30.613] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 30.613] (II) NOUVEAU(0): Output VGA-1 connected
[ 30.613] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 30.613] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768
[ 30.613] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 30.613] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 30.613] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 30.613] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 30.613] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.613] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 30.613] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.613] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 30.613] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.614] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 30.614] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 30.614] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 30.614] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 30.614] (==) NOUVEAU(0): DPI set to (96, 96)
[ 30.614] (II) Loading sub module "fb"
[ 30.614] (II) LoadModule: "fb"
[ 30.614] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.614] (II) Module fb: vendor="X.Org Foundation"
[ 30.614] compiled for 1.13.0, module version = 1.0.0
[ 30.614] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.614] (II) Loading sub module "exa"
[ 30.614] (II) LoadModule: "exa"
[ 30.614] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 30.614] (II) Module exa: vendor="X.Org Foundation"
[ 30.614] compiled for 1.13.0, module version = 2.6.0
[ 30.614] ABI class: X.Org Video Driver, version 13.0
[ 30.614] (II) Loading sub module "shadowfb"
[ 30.614] (II) LoadModule: "shadowfb"
[ 30.614] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 30.614] (II) Module shadowfb: vendor="X.Org Foundation"
[ 30.614] compiled for 1.13.0, module version = 1.0.0
[ 30.614] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.614] (II) UnloadModule: "vesa"
[ 30.614] (II) Unloading vesa
[ 30.614] (II) UnloadModule: "modesetting"
[ 30.614] (II) Unloading modesetting
[ 30.614] (II) UnloadModule: "fbdev"
[ 30.614] (II) Unloading fbdev
[ 30.614] (II) UnloadSubModule: "fbdevhw"
[ 30.614] (II) Unloading fbdevhw
[ 30.614] (--) Depth 24 pixmap format is 32 bpp
[ 30.615] (II) NOUVEAU(0): Opened GPU channel 2
[ 30.617] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.617] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.617] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.618] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.618] (II) EXA(0): Driver registered support for the following operations:
[ 30.618] (II) Solid
[ 30.618] (II) Copy
[ 30.618] (II) Composite (RENDER acceleration)
[ 30.618] (II) UploadToScreen
[ 30.618] (II) DownloadFromScreen
[ 30.618] (==) NOUVEAU(0): Backing store disabled
[ 30.618] (==) NOUVEAU(0): Silken mouse enabled
[ 30.618] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 30.618] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 30.618] (==) NOUVEAU(0): DPMS enabled
[ 30.618] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.618] (--) RandR disabled
[ 30.633] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.633] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.633] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.633] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.633] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 30.633] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.633] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.633] (II) AIGLX: Loaded and initialized nouveau
[ 30.633] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.635] (II) NOUVEAU(0): NVEnterVT is called.
[ 30.669] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 30.818] resize called 1024 768
[ 30.824] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 30.826] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.826] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.826] (II) LoadModule: "evdev"
[ 30.827] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.827] (II) Module evdev: vendor="X.Org Foundation"
[ 30.827] compiled for 1.13.0, module version = 2.7.3
[ 30.827] Module class: X.Org XInput Driver
[ 30.827] ABI class: X.Org XInput driver, version 18.0
[ 30.827] (II) Using input driver 'evdev' for 'Power Button'
[ 30.827] (**) Power Button: always reports core events
[ 30.827] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 30.827] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.827] (--) evdev: Power Button: Found keys
[ 30.827] (II) evdev: Power Button: Configuring as keyboard
[ 30.827] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 30.827] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.827] (**) Option "xkb_rules" "evdev"
[ 30.827] (**) Option "xkb_model" "pc105"
[ 30.827] (**) Option "xkb_layout" "fr"
[ 30.827] (**) Option "xkb_options" "lv3:ralt_switch"
[ 30.828] (II) XKB: reuse xkmfile /var/lib/xkb/server-024B27377A00C087BE90D9AAC040ECC4DA83644C.xkm
[ 30.829] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.829] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.829] (II) Using input driver 'evdev' for 'Power Button'
[ 30.829] (**) Power Button: always reports core events
[ 30.829] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 30.829] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.829] (--) evdev: Power Button: Found keys
[ 30.829] (II) evdev: Power Button: Configuring as keyboard
[ 30.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 30.829] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 30.829] (**) Option "xkb_rules" "evdev"
[ 30.829] (**) Option "xkb_model" "pc105"
[ 30.829] (**) Option "xkb_layout" "fr"
[ 30.829] (**) Option "xkb_options" "lv3:ralt_switch"
[ 30.829] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 30.830] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event5)
[ 30.830] (II) No input driver specified, ignoring this device.
[ 30.830] (II) This device may have been added with another device file.
[ 30.830] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6)
[ 30.830] (II) No input driver specified, ignoring this device.
[ 30.830] (II) This device may have been added with another device file.
[ 30.830] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 30.830] (II) No input driver specified, ignoring this device.
[ 30.830] (II) This device may have been added with another device file.
[ 30.830] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 30.830] (II) No input driver specified, ignoring this device.
[ 30.830] (II) This device may have been added with another device file.
[ 30.830] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event2)
[ 30.830] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[ 30.830] (II) Using input driver 'evdev' for 'HID 046a:0023'
[ 30.830] (**) HID 046a:0023: always reports core events
[ 30.830] (**) evdev: HID 046a:0023: Device: "/dev/input/event2"
[ 30.830] (--) evdev: HID 046a:0023: Vendor 0x46a Product 0x23
[ 30.830] (--) evdev: HID 046a:0023: Found keys
[ 30.830] (II) evdev: HID 046a:0023: Configuring as keyboard
[ 30.830] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2/event2"
[ 30.830] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 8)
[ 30.830] (**) Option "xkb_rules" "evdev"
[ 30.830] (**) Option "xkb_model" "pc105"
[ 30.830] (**) Option "xkb_layout" "fr"
[ 30.830] (**) Option "xkb_options" "lv3:ralt_switch"
[ 30.831] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event3)
[ 30.831] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[ 30.831] (II) Using input driver 'evdev' for 'HID 046a:0023'
[ 30.831] (**) HID 046a:0023: always reports core events
[ 30.831] (**) evdev: HID 046a:0023: Device: "/dev/input/event3"
[ 30.831] (--) evdev: HID 046a:0023: Vendor 0x46a Product 0x23
[ 30.831] (--) evdev: HID 046a:0023: Found 1 mouse buttons
[ 30.831] (--) evdev: HID 046a:0023: Found scroll wheel(s)
[ 30.831] (--) evdev: HID 046a:0023: Found relative axes
[ 30.831] (II) evdev: HID 046a:0023: Forcing relative x/y axes to exist.
[ 30.831] (--) evdev: HID 046a:0023: Found absolute axes
[ 30.831] (II) evdev: HID 046a:0023: Forcing absolute x/y axes to exist.
[ 30.831] (--) evdev: HID 046a:0023: Found keys
[ 30.831] (II) evdev: HID 046a:0023: Configuring as mouse
[ 30.831] (II) evdev: HID 046a:0023: Configuring as keyboard
[ 30.831] (II) evdev: HID 046a:0023: Adding scrollwheel support
[ 30.831] (**) evdev: HID 046a:0023: YAxisMapping: buttons 4 and 5
[ 30.831] (**) evdev: HID 046a:0023: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.831] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3/event3"
[ 30.831] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 9)
[ 30.831] (**) Option "xkb_rules" "evdev"
[ 30.831] (**) Option "xkb_model" "pc105"
[ 30.831] (**) Option "xkb_layout" "fr"
[ 30.831] (**) Option "xkb_options" "lv3:ralt_switch"
[ 30.831] (II) evdev: HID 046a:0023: initialized for relative axes.
[ 30.831] (WW) evdev: HID 046a:0023: ignoring absolute axes.
[ 30.831] (**) HID 046a:0023: (accel) keeping acceleration scheme 1
[ 30.831] (**) HID 046a:0023: (accel) acceleration profile 0
[ 30.831] (**) HID 046a:0023: (accel) acceleration factor: 2.000
[ 30.831] (**) HID 046a:0023: (accel) acceleration threshold: 4
[ 30.832] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 30.832] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 30.832] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 30.832] (**) USB Optical Mouse: always reports core events
[ 30.832] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 30.832] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d22
[ 30.832] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 30.832] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 30.832] (--) evdev: USB Optical Mouse: Found relative axes
[ 30.832] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 30.832] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 30.832] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 30.832] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 30.832] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4/event4"
[ 30.832] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 30.832] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 30.832] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 30.832] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 30.832] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 30.832] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 30.832] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 30.832] (II) No input driver specified, ignoring this device.
[ 30.832] (II) This device may have been added with another device file.
[ 30.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 30.836] (II) No input driver specified, ignoring this device.
[ 30.836] (II) This device may have been added with another device file.
[ 30.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6)
[ 30.836] (II) No input driver specified, ignoring this device.
[ 30.836] (II) This device may have been added with another device file.
[ 30.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event5)
[ 30.836] (II) No input driver specified, ignoring this device.
[ 30.836] (II) This device may have been added with another device file.
[ 30.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 30.836] (II) No input driver specified, ignoring this device.
[ 30.836] (II) This device may have been added with another device file.
[ 593.345] resize called 2048 768
[ 593.405] resize called 2048 768
[ 594.987] (II) XKB: reuse xkmfile /var/lib/xkb/server-F39D2301430E3A1999D799C6368694DD357E1DC4.xkm
Dernière modification par Bat_Tuc (Le 05/02/2013, à 18:59)
Un jour mon père m' a dit " fils, si ton programme tourne, c est qu il peut faire mieux ..."
Hors ligne
#2 Le 05/02/2013, à 18:55
- Bat_Tuc
Re : GE Force 210 Gainward Installation drivers impossible
A note que mes deux écrans sont allumés mais que un des deux apparait comme " inconnu" dans les parametres d'affichage
Un jour mon père m' a dit " fils, si ton programme tourne, c est qu il peut faire mieux ..."
Hors ligne
#3 Le 05/02/2013, à 19:01
- Bat_Tuc
Re : GE Force 210 Gainward Installation drivers impossible
j'avais pas fait gaffe qu'il y avait une deuxieme page a l'erreur:
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You
may find suggestions on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Voici le fichier concerne
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue Feb 5 17:59:57 2013
installer version: 310.32
PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
nvidia-installer command line:
./nvidia-installer
Using: nvidia-installer ncurses user interface
-> The file '/tmp/.X0-lock' exists and appears to contain the process ID '1026'$
ERROR: You appear to be running an X server; please exit X before installing. $
Un jour mon père m' a dit " fils, si ton programme tourne, c est qu il peut faire mieux ..."
Hors ligne
#4 Le 06/02/2013, à 16:11
- Bat_Tuc
Re : GE Force 210 Gainward Installation drivers impossible
Non ? :'(
Un jour mon père m' a dit " fils, si ton programme tourne, c est qu il peut faire mieux ..."
Hors ligne
#5 Le 06/02/2013, à 22:37
- Tabou
Re : GE Force 210 Gainward Installation drivers impossible
Bonjour, je ne sais pas quel version d'Ubuntu tu as, mais tu dois aller dans le mode dépannage (shift pendant le boot, puis choisir ton noyaux en "mode de récupération" ou un truc dans ce gout là). Dans le menu choisi de te connecter en mode "root" (peut-être devras-tu choisir, au préalable de te connecter au réseau, ça dépend des versions). Relance le fichier .run et voilà.
Tu peux aussi taper de ton bureau, dans un terminal :
sudo telinit 1
Hors ligne
#6 Le 08/02/2013, à 09:39
- Bat_Tuc
Re : GE Force 210 Gainward Installation drivers impossible
merci j'essaye ca
Un jour mon père m' a dit " fils, si ton programme tourne, c est qu il peut faire mieux ..."
Hors ligne
#7 Le 11/02/2013, à 14:20
- Bat_Tuc
Re : GE Force 210 Gainward Installation drivers impossible
c'est long le telinit .. voire tres long ?! ..
normal ?
Un jour mon père m' a dit " fils, si ton programme tourne, c est qu il peut faire mieux ..."
Hors ligne