Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 20/10/2007, à 19:01

ornet

mount: special device /dev/hda does not exist

Bonsoir,

je ne peux avoir accès au lecteur de cd rom, il apparaît bien dans le poste de travail, mais si je clique:

mount: special device /dev/hda does not exist

que faire?

Ensuite, même en passant par le contrôle volume, je ne trouve pas comment activer la prise casque. Elle fonctionne sous windows, je suis en dual boot.

Merci,

Yann

kernel 2.6.20-16-386

os type linux

gcc version 4.1.2 (i482-linux)

cpu information

genuine intel cpus 1

intel(r) core (tm) 2 duo cpu T7100 @ 1.80 Ghz
800.000 Mhz
memory total:2026 MiB
swap total: 2596 MiB

storage: SCSI device scsi0

intel corp mobile memory controler hub (rev0c)
sony corporation unknown device 9005


sony vaio vgn fz 18 m sous ubuntu

Hors ligne

#2 Le 20/10/2007, à 19:09

ornet

Re : mount: special device /dev/hda does not exist

on avance:

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda3
UUID=37f3be12-bd5c-4c88-9b9c-7ba608792a58 /               ext3    defaults,errors=remount-ro 0       1
# /dev/sda5
UUID=df805be3-7a85-49b5-89fc-16b6a4742233 none            swap    sw              0       0
/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0


sony vaio vgn fz 18 m sous ubuntu

Hors ligne

#3 Le 20/10/2007, à 19:26

ornet

Re : mount: special device /dev/hda does not exist

D'autres infos:

[    0.000000] Detected 1795.620 MHz processor.
[   10.522558] Built 1 zonelists.  Total pages: 519891
[   10.522560] Kernel command line: root=UUID=37f3be12-bd5c-4c88-9b9c-7ba608792a58 ro quiet splash
[   10.522675] mapped APIC to ffffd000 (fee00000)
[   10.522677] mapped IOAPIC to ffffc000 (fec00000)
[   10.522680] Enabling fast FPU save and restore... done.
[   10.522682] Enabling unmasked SIMD FPU exception support... done.
[   10.522687] Initializing CPU#0
[   10.522742] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   10.524969] Console: colour VGA+ 80x25
[   10.525222] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   10.525483] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   10.575511] Memory: 2067168k/2095936k available (1917k kernel code, 27476k reserved, 867k data, 328k init, 1178432k highmem)
[   10.575518] virtual kernel memory layout:
[   10.575519]     fixmap  : 0xfffa9000 - 0xfffff000   ( 344 kB)
[   10.575520]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   10.575521]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   10.575522]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   10.575523]       .init : 0xc03bc000 - 0xc040e000   ( 328 kB)
[   10.575524]       .data : 0xc02df4d8 - 0xc03b8434   ( 867 kB)
[   10.575525]       .text : 0xc0100000 - 0xc02df4d8   (1917 kB)
[   10.575528] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   10.575650] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   10.575654] hpet0: 3 64-bit timers, 14318180 Hz
[   10.576658] Using HPET for base-timer
[   10.655610] Calibrating delay using timer specific routine.. 3594.78 BogoMIPS (lpj=7189573)
[   10.655635] Security Framework v1.0.0 initialized
[   10.655641] SELinux:  Disabled at boot.
[   10.655648] Mount-cache hash table entries: 512
[   10.655729] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   10.655735] monitor/mwait feature present.
[   10.655737] using mwait in idle threads.
[   10.655740] CPU: L1 I cache: 32K, L1 D cache: 32K
[   10.655742] CPU: L2 cache: 2048K
[   10.655744] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   10.655750] Compat vDSO mapped to ffffe000.
[   10.655754] Remapping vsyscall page to ffffe000
[   10.655761] CPU: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
[   10.655766] Checking 'hlt' instruction... OK.
[   10.671906] Early unpacking initramfs... done
[   10.933850] ACPI: Core revision 20060707
[   10.934077] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   10.939106] ENABLING IO-APIC IRQs
[   10.939291] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   11.083507] Booting paravirtualized kernel on bare hardware
[   11.083582] Time: 18:28:25  Date: 09/20/107
[   11.083598] NET: Registered protocol family 16
[   11.083649] EISA bus registered
[   11.083652] ACPI: bus type pci registered
[   11.083962] PCI: PCI BIOS revision 3.00 entry at 0xfddf1, last bus=10
[   11.083964] PCI: Using configuration type 1
[   11.083965] Setting up standard PCI resources
[   11.087134] ACPI: Interpreter enabled
[   11.087136] ACPI: Using IOAPIC for interrupt routing
[   11.099563] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   11.099568] PCI: Probing PCI hardware (bus 00)
[   11.107408] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[   11.108975] Boot video device is 0000:01:00.0
[   11.109967] PCI: Transparent bridge - 0000:00:1e.0
[   11.110026] PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses')
[   11.110028] Please report the result to linux-kernel to fix this permanently
[   11.110110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   11.119314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[   11.119867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   11.120059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   11.120250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   11.120444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[   11.121442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   11.121957] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[   11.122153] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   11.122344] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[   11.122537] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   11.122729] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   11.122920] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   11.123111] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   11.123301] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   11.127298] Linux Plug and Play Support v0.97 (c) Adam Belay
[   11.127305] pnp: PnP ACPI init
[   11.133292] pnp: PnP ACPI: found 10 devices
[   11.133295] PnPBIOS: Disabled by ACPI PNP
[   11.133321] PCI: Using ACPI for IRQ routing
[   11.133322] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   11.237138] NET: Registered protocol family 8
[   11.237140] NET: Registered protocol family 20
[   11.237579] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
[   11.237646] PCI: Bridge: 0000:00:01.0
[   11.237648]   IO window: 2000-2fff
[   11.237651]   MEM window: cc000000-ceffffff
[   11.237653]   PREFETCH window: d0000000-dfffffff
[   11.237656] PCI: Bridge: 0000:00:1c.0
[   11.237659]   IO window: 3000-3fff
[   11.237665]   MEM window: f6000000-f7ffffff
[   11.237669]   PREFETCH window: f0000000-f1ffffff
[   11.237674] PCI: Bridge: 0000:00:1c.1
[   11.237677]   IO window: 4000-4fff
[   11.237682]   MEM window: f8000000-f9ffffff
[   11.237687]   PREFETCH window: f2000000-f3ffffff
[   11.237692] PCI: Bridge: 0000:00:1c.2
[   11.237695]   IO window: 5000-5fff
[   11.237700]   MEM window: fa000000-fbffffff
[   11.237704]   PREFETCH window: f4000000-f5ffffff
[   11.237710] PCI: Bridge: 0000:00:1c.4
[   11.237712]   IO window: 6000-6fff
[   11.237718]   MEM window: fc000000-fc0fffff
[   11.237722]   PREFETCH window: disabled.
[   11.237729] PCI: Bus 10, cardbus bridge: 0000:09:03.0
[   11.237730]   IO window: 00007000-000070ff
[   11.237735]   IO window: 00007400-000074ff
[   11.237740]   PREFETCH window: 88000000-8bffffff
[   11.237745]   MEM window: 90000000-93ffffff
[   11.237749] PCI: Bridge: 0000:00:1e.0
[   11.237752]   IO window: 7000-7fff
[   11.237758]   MEM window: fc100000-fc1fffff
[   11.237762]   PREFETCH window: 88000000-8bffffff
[   11.237775] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   11.237779] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   11.237800] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   11.237805] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   11.237826] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
[   11.237831] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   11.237853] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   11.237858] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   11.237879] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[   11.237884] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   11.237897] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   11.237913] ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[   11.237927] NET: Registered protocol family 2
[   11.275291] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   11.275358] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[   11.275548] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   11.275645] TCP: Hash tables configured (established 131072 bind 65536)
[   11.275647] TCP reno registered
[   11.287337] checking if image is initramfs... it is
[   11.799427] Freeing initrd memory: 6756k freed
[   11.799552] Simple Boot Flag at 0x36 set to 0x1
[   11.799746] audit: initializing netlink socket (disabled)
[   11.799756] audit(1192904905.308:1): initialized
[   11.799799] highmem bounce pool size: 64 pages
[   11.799830] VFS: Disk quotas dquot_6.5.1
[   11.799841] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.799873] io scheduler noop registered
[   11.799875] io scheduler anticipatory registered
[   11.799877] io scheduler deadline registered
[   11.799881] io scheduler cfq registered (default)
[   11.800100] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   11.800128] assign_interrupt_mode Found MSI capability
[   11.800131] Allocate Port Service[0000:00:01.0:pcie00]
[   11.800151] Allocate Port Service[0000:00:01.0:pcie02]
[   11.800214] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   11.800267] assign_interrupt_mode Found MSI capability
[   11.800269] Allocate Port Service[0000:00:1c.0:pcie00]
[   11.800287] Allocate Port Service[0000:00:1c.0:pcie02]
[   11.800389] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   11.800443] assign_interrupt_mode Found MSI capability
[   11.800445] Allocate Port Service[0000:00:1c.1:pcie00]
[   11.800465] Allocate Port Service[0000:00:1c.1:pcie02]
[   11.800565] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   11.800619] assign_interrupt_mode Found MSI capability
[   11.800621] Allocate Port Service[0000:00:1c.2:pcie00]
[   11.800639] Allocate Port Service[0000:00:1c.2:pcie02]
[   11.800742] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   11.800795] assign_interrupt_mode Found MSI capability
[   11.800797] Allocate Port Service[0000:00:1c.4:pcie00]
[   11.800816] Allocate Port Service[0000:00:1c.4:pcie02]
[   11.800947] isapnp: Scanning for PnP cards...
[   12.156078] isapnp: No Plug & Play device found
[   12.169200] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   12.169632] mice: PS/2 mouse device common for all mice
[   12.169955] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   12.170093] input: Macintosh mouse button emulation as /class/input/input0
[   12.170115] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   12.170118] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   12.170328] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   12.175029] i8042.c: Detected active multiplexing controller, rev 1.1.
[   12.178673] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.178676] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   12.178678] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   12.178680] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   12.178682] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   12.179168] EISA: Probing bus 0 at eisa.0
[   12.179175] Cannot allocate resource for EISA slot 1
[   12.179177] Cannot allocate resource for EISA slot 2
[   12.179179] Cannot allocate resource for EISA slot 3
[   12.179180] Cannot allocate resource for EISA slot 4
[   12.179182] Cannot allocate resource for EISA slot 5
[   12.179183] Cannot allocate resource for EISA slot 6
[   12.179185] Cannot allocate resource for EISA slot 7
[   12.179190] EISA: Detected 0 cards.
[   12.209246] TCP cubic registered
[   12.209250] NET: Registered protocol family 1
[   12.209263] Using IPI Shortcut mode
[   12.209305] ACPI: (supports S0 S3 S4 S5)
[   12.209343]   Magic number: 11:363:494
[   12.209546] Freeing unused kernel memory: 328k freed
[   12.210756] Time: tsc clocksource has been installed.
[   12.381294] input: AT Translated Set 2 keyboard as /class/input/input1
[   13.382687] Capability LSM initialized
[   13.410302] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  Sony] OemTableId [    VAIO] [20060707]
[   13.410467] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  Sony] OemTableId [    VAIO] [20060707]
[   13.410980] Monitor-Mwait will be used to enter C-1 state
[   13.410982] Monitor-Mwait will be used to enter C-2 state
[   13.410983] Monitor-Mwait will be used to enter C-3 state
[   13.410985] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   13.410989] ACPI: Processor [CPU0] (supports 8 throttling states)
[   13.413245] ACPI: Thermal Zone [TZ00] (46 C)
[   13.414289] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707]
[   13.414328] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [1] [20060707]
[   13.415042] ACPI: Thermal Zone [TZ01] (46 C)
[   13.702658] usbcore: registered new interface driver usbfs
[   13.702673] usbcore: registered new interface driver hub
[   13.702687] usbcore: registered new device driver usb
[   13.703227] USB Universal Host Controller Interface driver v3.0
[   13.703255] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   13.703263] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   13.703267] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   13.703358] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   13.703388] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[   13.703456] usb usb1: configuration #1 chosen from 1 choice
[   13.703473] hub 1-0:1.0: USB hub found
[   13.703477] hub 1-0:1.0: 2 ports detected
[   13.804454] ieee1394: Initialized config rom entry `ip1394'
[   13.805983] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 19
[   13.805992] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   13.805996] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   13.806011] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   13.806041] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001820
[   13.806106] usb usb2: configuration #1 chosen from 1 choice
[   13.806121] hub 2-0:1.0: USB hub found
[   13.806125] hub 2-0:1.0: 2 ports detected
[   13.820837] SCSI subsystem initialized
[   13.824630] libata version 2.20 loaded.
[   13.909941] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[   13.909950] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   13.909954] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   13.909968] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   13.909999] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840
[   13.910065] usb usb3: configuration #1 chosen from 1 choice
[   13.910081] hub 3-0:1.0: USB hub found
[   13.910086] hub 3-0:1.0: 2 ports detected
[    3.284000] Time: hpet clocksource has been installed.
[    3.340000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 21
[    3.340000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.340000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.340000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    3.340000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001860
[    3.340000] usb usb4: configuration #1 chosen from 1 choice
[    3.340000] hub 4-0:1.0: USB hub found
[    3.340000] hub 4-0:1.0: 2 ports detected
[    3.444000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.444000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.444000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.444000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    3.444000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    3.444000] usb usb5: configuration #1 chosen from 1 choice
[    3.444000] hub 5-0:1.0: USB hub found
[    3.444000] hub 5-0:1.0: 2 ports detected
[    3.548000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    3.548000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    3.548000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.548000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    3.548000] ehci_hcd 0000:00:1a.7: debug port 1
[    3.548000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    3.548000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[    3.552000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.552000] usb usb6: configuration #1 chosen from 1 choice
[    3.552000] hub 6-0:1.0: USB hub found
[    3.552000] hub 6-0:1.0: 4 ports detected
[    3.656000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[    3.656000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.656000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.656000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    3.656000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.656000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.656000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfc404c00
[    3.660000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.660000] usb usb7: configuration #1 chosen from 1 choice
[    3.660000] hub 7-0:1.0: USB hub found
[    3.660000] hub 7-0:1.0: 6 ports detected
[    3.764000] ACPI: PCI Interrupt 0000:09:03.1[b] -> GSI 17 (level, low) -> IRQ 17
[    3.812000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fc102000-fc1027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.812000] ahci 0000:00:1f.2: version 2.1
[    3.812000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 21
[    4.212000] usb 6-2: new high speed USB device using ehci_hcd and address 2
[    4.344000] usb 6-2: configuration #1 chosen from 1 choice
[    4.796000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    4.816000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.816000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    4.816000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    4.816000] ata1: SATA max UDMA/133 cmd 0xf884a100 ctl 0x00000000 bmdma 0x00000000 irq 21
[    4.816000] ata2: SATA max UDMA/133 cmd 0xf884a180 ctl 0x00000000 bmdma 0x00000000 irq 21
[    4.816000] ata3: SATA max UDMA/133 cmd 0xf884a200 ctl 0x00000000 bmdma 0x00000000 irq 21
[    4.816000] scsi0 : ahci
[    5.000000] usb 5-1: configuration #1 chosen from 1 choice
[    5.084000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[080046030272379e]
[    5.300000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.300000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    5.300000] ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
[    5.300000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.300000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    5.300000] ata1.00: configured for UDMA/133
[    5.300000] scsi1 : ahci
[    5.612000] ata2: SATA link down (SStatus 0 SControl 300)
[    5.612000] scsi2 : ahci
[    5.924000] ata3: SATA link down (SStatus 0 SControl 300)
[    5.924000] scsi 0:0:0:0: Direct-Access     ATA      ST9160821AS      3.AL PQ: 0 ANSI: 5
[    5.932000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    5.932000] sda: Write Protect is off
[    5.932000] sda: Mode Sense: 00 3a 00 00
[    5.932000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.932000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    5.932000] sda: Write Protect is off
[    5.932000] sda: Mode Sense: 00 3a 00 00
[    5.932000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.932000]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    5.980000] sd 0:0:0:0: Attached scsi disk sda
[    5.984000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.272000] Attempting manual resume
[    6.272000] swsusp: Resume From Partition 8:5
[    6.272000] PM: Checking swsusp image.
[    6.272000] PM: Resume from disk failed.
[    6.300000] kjournald starting.  Commit interval 5 seconds
[    6.300000] EXT3-fs: mounted filesystem with ordered data mode.
[   20.084000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   20.088000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.328000] Linux agpgart interface v0.102 (c) Dave Jones
[   20.416000] agpgart: Detected an Intel 965GM Chipset.
[   20.428000] agpgart: AGP aperture is 256M @ 0x0
[   20.784000] Yenta: CardBus bridge found at 0000:09:03.0 [104d:9005]
[   20.784000] Yenta: Enabling burst memory read transactions
[   20.784000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   20.784000] Yenta: Routing CardBus interrupts to PCI
[   20.784000] Yenta TI: socket 0000:09:03.0, mfunc 0x01121b22, devctl 0x64
[   20.828000] ieee80211_crypt: registered algorithm 'NULL'
[   20.840000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   20.840000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   21.016000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   21.016000] Socket status: 30000006
[   21.016000] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[   21.016000] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[   21.016000] cs: IO port probe 0x7000-0x7fff: clean.
[   21.016000] pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
[   21.016000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[   21.024000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   21.024000] PCI: Setting latency timer of device 0000:08:00.0 to 64
[   21.024000] sky2 0000:08:00.0: v1.13 addr 0xfc000000 irq 16 Yukon-FE (0xb7) rev 1
[   21.024000] sky2 eth0: addr 00:13:a9:c4:42:0d
[   21.188000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[   21.188000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   21.188000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   21.188000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   21.188000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   21.212000] Linux video capture interface: v2.00
[   21.304000] Bluetooth: Core ver 2.11
[   21.304000] NET: Registered protocol family 31
[   21.304000] Bluetooth: HCI device and connection manager initialized
[   21.304000] Bluetooth: HCI socket layer initialized
[   21.328000] Bluetooth: HCI USB driver ver 2.9
[   21.420000] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
[   21.420000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[   21.420000] uvcvideo: Failed to initialize the device (-5).
[   21.444000] usbcore: registered new interface driver uvcvideo
[   21.444000] USB Video Class driver (v0.1.0)
[   21.444000] usbcore: registered new interface driver hci_usb
[   21.444000] sky2 eth0: enabling interface
[   21.448000] sky2 eth0: ram buffer 4K
[   21.508000] Real Time Clock Driver v1.12ac
[   21.576000] input: PS/2 Mouse as /class/input/input2
[   21.596000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[   21.688000] ACPI: PCI Interrupt 0000:09:03.2[C] -> GSI 18 (level, low) -> IRQ 18
[   21.748000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   21.748000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   22.168000] cs: IO port probe 0x100-0x3af: clean.
[   22.172000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.172000] cs: IO port probe 0x820-0x8ff: clean.
[   22.172000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.172000] cs: IO port probe 0xa00-0xaff: clean.
[   22.780000] NET: Registered protocol family 17
[   23.524000] hda_intel: azx_get_response timeout, switching to polling mode...
[   23.532000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[   26.656000] fuse init (API version 7.8)
[   26.696000] lp: driver loaded but no devices found
[   26.732000] Adding 2658716k swap on /dev/disk/by-uuid/df805be3-7a85-49b5-89fc-16b6a4742233.  Priority:-1 extents:1 across:2658716k
[   26.856000] EXT3 FS on sda3, internal journal
[   32.136000] input: Lid Switch as /class/input/input4
[   32.140000] ACPI: Lid Switch [LID0]
[   32.164000] input: Power Button (CM) as /class/input/input5
[   32.168000] ACPI: Power Button (CM) [PWRB]
[   32.200000] ACPI: Battery Slot [BAT0] (battery present)
[   32.208000] No dock devices found.
[   32.252000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   32.260000] Using specific hotkey driver
[   32.284000] ibm_acpi: ec object not found
[   32.304000] ACPI: AC Adapter [ADP1] (on-line)
[   32.348000] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   32.368000] pcc_acpi: loading...
[   36.392000] ppdev: user-space parallel port driver
[   37.152000] apm: BIOS not found.
[   37.228000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   37.232000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[   37.232000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[   37.232000] sonypi: device allocated minor is 62
[   37.260000] input: Sony Vaio Jogdial as /class/input/input6
[   37.300000] input: Sony Vaio Keys as /class/input/input7
[   37.348000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 646)
[   37.392000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 657)
[   37.432000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 659)
[   37.472000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 646)
[   37.624000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   37.732000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   37.748000] NFSD: starting 90-second grace period
[   41.260000] Bluetooth: L2CAP ver 2.8
[   41.260000] Bluetooth: L2CAP socket layer initialized
[   41.452000] Bluetooth: RFCOMM socket layer initialized
[   41.452000] Bluetooth: RFCOMM TTY layer initialized
[   41.452000] Bluetooth: RFCOMM ver 1.8
[   63.404000] NET: Registered protocol family 10
[   63.404000] lo: Disabled Privacy Extensions
[   63.404000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   63.404000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  132.800000] ieee80211_crypt: registered algorithm 'WEP'
[  133.108000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  149.836000] eth1: no IPv6 routers present


sony vaio vgn fz 18 m sous ubuntu

Hors ligne

#4 Le 25/10/2007, à 13:51

RenZO

Re : mount: special device /dev/hda does not exist

Chipset i965, pas de gestion de l'ide native.
Tu dois donc charger le module, sudo modprobe ide-generic, et pour l'avoir au démarrage, sudo gedit /etc/modules, ajoute ide-generic.

Hors ligne

#5 Le 25/10/2007, à 21:32

ornet

Re : mount: special device /dev/hda does not exist

Merci beaucoup pour la réponse, et si jamais tu peux étudier mes autres posts concernant cette prise casque,

yann


sony vaio vgn fz 18 m sous ubuntu

Hors ligne

#6 Le 25/10/2007, à 21:33

ornet

Re : mount: special device /dev/hda does not exist

http://forum.ubuntu-fr.org/viewtopic.php?id=155303

http://forum.ubuntu-fr.org/viewtopic.php?id=157660

http://forum.ubuntu-fr.org/viewtopic.php?id=156806


sony vaio vgn fz 18 m sous ubuntu

Hors ligne