Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 22/02/2013, à 10:15

lilp

[Résolus] Pbrs Samba

Bonjour,
Je possède un petit Serveur en Xubuntu monté moi même pour faire office de Cloud, de serveur de DL, et de Media Center (sa fait bcp oui smile ).
Mais j'ai hélas 2 petits soucis concernant le partage de fichiers.
-Depuis mon poste sous Windows 7, je voit bien mon serveur et mes 3 dossiers partagés, mais à chaque démarrage de mon poste Windows, il me demande un login et mdp pour accéder à ces dossiers => Comment enlever cette demande d'identification.

-Depuis mon poste Xubuntu, je voit ma Freebox et j'y est accès sans soucis. Mais je voit seulement mon poste Windows, mais impossible d'y accéder. Pourtant j'ai mit plusieurs dossiers en partages depuis le poste Windows, dossier "Incoming", Partage de fichiers "utilisateur, tout le monde, groupe résidentiel".

Comment remédier à ces 2 petits soucis.
D'avance merci.

Dernière modification par lilp (Le 21/03/2013, à 13:41)


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#2 Le 22/02/2013, à 10:20

richardgilbert

Re : [Résolus] Pbrs Samba

Bonjour;
Je ne me souviens pas si win 7 fait la même chose que win xp version famille ou home, malheureusement la version initial, home et famille ne gardent pas l'utilisateur et mot de passe d'un serveur. La solution est de mettre le même utilisateur et mot de passe sur win.
Pour ton deuxième problème je pense dans la même solution du première problème.


Debian, Ubuntu, Xubuntu, Lubuntu & Linuxmint.

Hors ligne

#3 Le 22/02/2013, à 10:29

lilp

Re : [Résolus] Pbrs Samba

Ce sont déjà les mêmes nom d'utilisateurs, je viens de mettre les mm mot de passe sur mon compte Server et le compte Windows.
Mais depuis le poste Xubuntu, toujours impossible d'accéder aux partages Windows.


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#4 Le 22/02/2013, à 13:59

jplemoine

Re : [Résolus] Pbrs Samba

non, il faut modifier le fichier smb.conf : http://doc.ubuntu-fr.org/samba_smb.conf
Paragraphe 2.5
Je crois qu'il faut passer de security=user à security=share


Membre de l'ALDIL (Association Lyonnaise pour le Développement de l'Informatique Libre)
- En pro, après 20 ans de développement, administrateur Linux / Unix depuis Avril 2019.
- En privé, sous Ubuntu-Xubuntu depuis 2009.

Hors ligne

#5 Le 22/02/2013, à 23:47

toutafai

Re : [Résolus] Pbrs Samba

Bonsoir,

pour faire un diagnostic, il faudrait ces retours :

smbtree
testparm
cat /etc/samba/smb.conf
sudo ufw status

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#6 Le 25/02/2013, à 09:51

lilp

Re : [Résolus] Pbrs Samba

Voici les retours des commandes :
SmbTree :

WORKGROUP
        \\SERVEUR                       Serveur server (Samba, Ubuntu)
                \\SERVEUR\print$                Printer Drivers
                \\SERVEUR\Films
                \\SERVEUR\Downloads
                \\SERVEUR\Series
                \\SERVEUR\IPC$                  IPC Service (Serveur server (Samba, Ubuntu))
        \\FREEBOX                       Partage
                \\FREEBOX\IPC$                  IPC Service (Partage)
                \\FREEBOX\Disque dur            AutoShare of fbxhdiskd partition 2

Testparm :

Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[printers]"
Processing section "[print$]"
Processing section "[Films]"
Processing section "[Downloads]"
Processing section "[Series]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions

[global]
        server string = %h server (Samba, Ubuntu)
        map to guest = Bad User
        obey pam restrictions = Yes
        pam password change = Yes
        passwd program = /usr/bin/passwd %u
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
        username map = /etc/samba/smbusers
        unix password sync = Yes
        syslog = 0
        log file = /var/log/samba/log.%m
        max log size = 1000
        dns proxy = No
        usershare allow guests = Yes
        panic action = /usr/share/samba/panic-action %d
        idmap config * : backend = tdb

[printers]
        comment = All Printers
        path = /var/spool/samba
        create mask = 0700
        printable = Yes
        print ok = Yes
        browseable = No

[print$]
        comment = Printer Drivers
        path = /var/lib/samba/printers

[Films]
        path = /media/lilphoenix/Films
        read only = No
        guest ok = Yes

[Downloads]
        path = /home/lilphoenix/Downloads
        read only = No
        guest ok = Yes

[Series]
        path = /media/lilphoenix/Series
        read only = No
        guest ok = Yes

cat /etc/samba/smb.conf :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
	encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;	printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each 
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

;	wins support = no
	username map = /etc/samba/smbusers
wins support = no
[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
;	browseable = yes
;	read only = yes
;	guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


;	available = yes
;	browsable = yes
;	available = yes
;	browsable = yes
;	available = yes
;	browsable = yes
[Films]
path = /media/lilphoenix/Films
available = yes
browsable = yes
public = yes
writable = yes

[Downloads]
path = /home/lilphoenix/Downloads
available = yes
browsable = yes
public = yes
writable = yes


[Series]
path = /media/lilphoenix/Series
available = yes
browsable = yes
public = yes
writable = yes

sudo ufw status :

[sudo] password for lilphoenix: 
État : inactif

Je n'ai plus le soucis de demande de mot de passe, j'ai mit le même mdp sur les deux postes (Xubuntu et Windows), mais si je souhaite avoir un autre poste, je ne suis pas obliger de mettre le même user encore?
Par contre, depuis le serveur "Xubuntu", je n'ai toujours pas accès mes fichiers partagés par Windows.

Dernière modification par lilp (Le 25/02/2013, à 09:54)


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#7 Le 25/02/2013, à 21:06

toutafai

Re : [Résolus] Pbrs Samba

Salut,
Pas de traces des partages windows dans le retour du smbtree.

Coté windows :
comence par pinguer ton ubuntu, si ok passe à la suite.
Commence par vérifier que ton non de workgroup sous windows est bien WORKGROUP en majuscules, si il est en minuscules mets le en majuscules.
Ensuite le partage résidentiel, c'est une m....., active le partage simple de fichiers. Rebbot pour etre sur que les modifcations soient prise en compte
Enfin si tu as un pare feu, vérifie qu'il autorise bien TOUS le trafic sur ton réseau local.


Coté ubuntu :
fait un ping vers ton windows, si ok continue
rien d'autre si ce n'est le pare feu, ufw n'est pas actif mais que nous dit iptables ?

sudo iptables -L

Enfin pour ce qui est du mot de passe, il y a plusieurs facon soit tu forces (dans le fichier /etc/samba/smb.conf) que ton partage appartient toujours au meme user, soit il faut que tous les utilisateurs fasse partie du groupe des utilisateurs samba.

Dernière modification par toutafai (Le 25/02/2013, à 21:08)


Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#8 Le 26/02/2013, à 12:32

lilp

Re : [Résolus] Pbrs Samba

Voici le résultat de Iptables :

Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Les pings dans les 2 sens fonctionnent bien, WORKGROUP est bien écrit en majuscule sur Xubuntu et Windows, j'ai enlever le partage résidentiel, et activer le partage normal sous Windows.
Parefeu Windows désactivé.
Le message depuis Xubuntu lorsque je click sur mon pc WIndows :

L'obtention de la liste des partagfes du servuer à échoué

Comment ajouter un utilisateur au groupe Samba?


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#9 Le 26/02/2013, à 14:15

richardgilbert

Re : [Résolus] Pbrs Samba

Regarde si l'utilisateur sur xubuntu est bien crée, alors sur un terminal fait:

sudo smbpasswd -a utilisateur

change utlisateur par le tien et introduit le mot de passe de cet utilisateur.
Après vérifie si l'utilisateur sur /etc/samba/smb.conf a les droits sur le repertoire à partager.

Dernière modification par richardgilbert (Le 26/02/2013, à 14:17)


Debian, Ubuntu, Xubuntu, Lubuntu & Linuxmint.

Hors ligne

#10 Le 26/02/2013, à 14:23

toutafai

Re : [Résolus] Pbrs Samba

pour ajouter un utilisateur au groupe samba : Système > Administration > Utilisateurs et groupe, déverrouiller, chercher le groupe sambashare et rajouter tous les utilisateurs dedans (les nouveaux droit seront pris en compte après avoir redemander de la session)

Il faut ouvrir les ports comme c'est indiqué dans la documentation à l'aide de gufw


Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#11 Le 26/02/2013, à 14:53

lilp

Re : [Résolus] Pbrs Samba

Mon utilisateur est déjà présent dans le groupe sambashare.
Dans samb.conf, je ne voit que les dossiers que Xubuntu partages (chose qu'il fait bien). Mais pas les fichiers partagés par WIndows.
J'ai installer gufw et je l'ai désactiver, le parefeu ne devrait donc pas posé de problème du coté de Xubuntu non plus.


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#12 Le 26/02/2013, à 15:49

toutafai

Re : [Résolus] Pbrs Samba

smb.conf ne resence que les partages ubuntu, normal qu'il n'y ai pas ceux de windows.
gufw n'est qu'une surcouche, d'iptables, lui meme surcouche de netfilter, donc le parefeu est toujours la, ouvre les ports comme indiqué.

par curiosité que donne

smbclient -L NOMDUPCWINDOWS -N

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#13 Le 26/02/2013, à 19:26

lilp

Re : [Résolus] Pbrs Samba

Voici le retour :

Connection to PCLilPhoenix failed (Error NT_STATUS_BAD_NETWORK_NAME)

Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#14 Le 27/02/2013, à 13:06

toutafai

Re : [Résolus] Pbrs Samba

il ne trouve pas ton pc nommé PCLilPhoenix...vérifie son nom sur le réseau et son ip (note la)
donne le retour de

ping IP #remplace IP par l'ip du pc windows
ping nom #remplace nom la le nom du pc
#je rejoute ces 3 commande en plus mais pour vérifier que coté ubuntu c'est ok 
ifconfig
cat /etc/resolv.conf
cat /etc/hosts

voit aussi a ouvrir les ports dans gufw


Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#15 Le 27/02/2013, à 16:02

lilp

Re : [Résolus] Pbrs Samba

Le ping ac l'ip passe bien, celui avec le nom du poste, j'ai :

ping: unknown host PCLilPhoenix

Pourtant j'ai renommé le poste Windows en "PCLilPhoenix" en ne mettant aucun caractère spécial.
Le retour de "ifconfig" :

eth0      Link encap:Ethernet  HWaddr 00:1c:c0:*:*:*
          inet adr:192.168.0.5  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: 2a01:e35:2e2d:10a0:f080:e12e:e1e5:8178/64 Scope:Global
          adr inet6: 2a01:e35:2e2d:10a0:21c:c0ff:fe21:d680/64 Scope:Global
          adr inet6: fe80::21c:c0ff:fe21:d680/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:44881159 erreurs:0 :15 overruns:0 frame:0
          TX packets:41400715 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets reçus:2104764113 (2.1 GB) Octets transmis:2888115673 (2.8 GB)

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:391577 erreurs:0 :0 overruns:0 frame:0
          TX packets:391577 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets reçus:80553727 (80.5 MB) Octets transmis:80553727 (80.5 MB)

Contenus de resolv.conf :

# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.1.1

Contenus du fichier "hosts" :

127.0.0.1	localhost
127.0.1.1	Serveur

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

J'ai remis un mdp différent entre mes deux comptes (Xubuntu et Windows) et j'ai de nouveau la demande de login depuis Windows pour avoir accès aux partages.
J'aimerais ne pas avoir cette demande de login et quil accepte tous les users, car jme suis acheter un RasberryPi pour faire un mediacenter de salon pour mes parents, et j'aimerais bien ne pas a avoir a renseigner des id pour avoir accès aux data de mon serveur.

Dernière modification par lilp (Le 27/02/2013, à 16:04)


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#16 Le 27/02/2013, à 20:44

toutafai

Re : [Résolus] Pbrs Samba

Bon coté ubuntu, tu fais pointer l'adresse de DNS vers localhost (127.0.0.1)  ce qui fait qu'il n'est pas capable de resoudre les nom locaux en ip... change cela dans la configuration de la connexion réseau dans network manager (dans l'onglet IPv4  soit  dans le champs "Adresse" tu met sut "Automatique (DHCP), soit tu renseigne l'adresse de ton routeur dans le champs "DNS"..met l'adresse IP de ton routeur)

coté windows, il faut vérifier le nom qu'a ton pc sur le réseau...

peut tu donner ce retour :

smbclient -L IPWINDOWS -N #remplace IPWINDOWS par l'adresse ip de ton windows

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#17 Le 28/02/2013, à 10:03

lilp

Re : [Résolus] Pbrs Samba

Voici le retour de la commande smb depuis Xubuntu :

Anonymous login successful
Domain=[WORKGROUP] OS=[Windows 7 Ultimate 7601 Service Pack 1] Server=[Windows 7 Ultimate 6.1]

	Sharename       Type      Comment
	---------       ----      -------
Error returning browse list: NT_STATUS_ACCESS_DENIED
session request to 192.168.0.1 failed (Called name not present)
session request to 192 failed (Called name not present)
session request to *SMBSERVER failed (Called name not present)
NetBIOS over TCP disabled -- no workgroup available

J'ai modifier manuellement le fichier resolv.conf, pour mettre l'@ 192.168.0.254.


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#18 Le 28/02/2013, à 11:01

toutafai

Re : [Résolus] Pbrs Samba

NON !!!! il ne faut pas éditer à la main le fichier resolv.conf, car il est géré par network manager; t'as pas vu cela quand tu as édité le fichier resolv :

# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN

je t'ai dit de le faire avec network manager, pas de le faire à la main ! (n'oublie pas de deconecter puis de te reconnecter apres)

Autre chose : le pare feu, tu en est ou ?


Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#19 Le 28/02/2013, à 11:20

lilp

Re : [Résolus] Pbrs Samba

J'ai utiliser network-manager et lance rles deux commandes suivante s:

dhclient -r eth0
dhclient eth0

J'ai ouvert les ports 445, 137, 135, en UDP,TCP en Out et In.
Le ping du 192.168.0.1 (Windows) ne répond pas, j'ai lancer la commande et aucun retour pour le moment.


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#20 Le 28/02/2013, à 12:42

toutafai

Re : [Résolus] Pbrs Samba

pour le pare feu ubuntu, cela ne suffit pas, voila ce que dit la doc :

135 	TCP et UDP 	Localisateur de services RPC
137 	TCP et UDP 	NetBIOS Name Service (nbname)
138 	UDP 	NetBIOS Datagram Service (nbdatagram)
139 	TCP 	NetBIOS Session Service (nbsession)
445 	TCP et UDP 	Services de dossiers partagés Windows 

Je te conseille aussi d'ouvrir le 53, pour le DNS

Si le ping ne répond pas, 3 possibilités :

soit l'adresse n'est pas bonne (je pense que tu as vérifié)
soit le pare feu de windows bloque la communication (a verifier)
soit tes parametres ip coté ubuntu sont pas bons, fait un check en donant ces retours :

ifconfig -a
route -n
cat /etc/resolv.conf

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#21 Le 28/02/2013, à 13:33

lilp

Re : [Résolus] Pbrs Samba

J'ai rajouter toutes les règles au parefeu, même celle pour le DNS.
Voici les différents retours dans l'ordre :

eth0      Link encap:Ethernet  HWaddr 00:1c:c0:21:*:*
          inet adr:192.168.0.5  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: 2a01:e35:2e2d:10a0:84cb:6c3f:5133:345f/64 Scope:Global
          adr inet6: 2a01:e35:2e2d:10a0:21c:c0ff:fe21:d680/64 Scope:Global
          adr inet6: fe80::21c:c0ff:fe21:d680/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Packets reçus:1086522 erreurs:0 :6 overruns:0 frame:0
          TX packets:1005119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets reçus:1491879929 (1.4 GB) Octets transmis:85312655 (85.3 MB)

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets reçus:911884 erreurs:0 :0 overruns:0 frame:0
          TX packets:911884 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets reçus:113584860 (113.5 MB) Octets transmis:113584860 (113.5 MB)
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
0.0.0.0         192.168.0.254   0.0.0.0         UG    0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth0
192.168.0.0     0.0.0.0         255.255.255.0   U     1      0        0 eth0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.0.254
nameserver 127.0.1.1

Je pense que c'est la passerelle qui n'est pas bonne.

192.168.0.0     0.0.0.0         255.255.255.0   U     1      0        0 eth0

Il me semble qu'a la place de 0.0.0.0 on devrait avoir 192.168.0.254, non?


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#22 Le 28/02/2013, à 14:43

toutafai

Re : [Résolus] Pbrs Samba

non la passerelle est bonne, et c'est celle-la (G pour gateway):

0.0.0.0         192.168.0.254   0.0.0.0         UG    0      0        0 eth0

donc coté ubuntu, c'est tout bon pour la configuration IP., néanmoins (et pour etre sur que tous est ok), donne (désolé de t'en demander autant, mais bon, c'est pour la bonne cause) le retour de

cat /etc/hosts
cat /etc/hostname

A mon avis, c'est du coté windows qu'il faut creuser...tu as toujours ton pare feu de désactivé ? que répond (sur ton windows)

ipconfig /all

Dernière modification par toutafai (Le 28/02/2013, à 14:43)


Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#23 Le 28/02/2013, à 16:38

lilp

Re : [Résolus] Pbrs Samba

Contenue de hosts :

127.0.0.1	localhost
127.0.1.1	Serveur

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Contenue de hostname :

Serveur

Le ping répond depuis le poste Xubuntu aps un redémarrage.
Je voit mon poste, je me connecte mais ac demande de passe. Mais la connection se fait. smile.
Manque juste la non demande de passe.


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne

#24 Le 28/02/2013, à 17:49

toutafai

Re : [Résolus] Pbrs Samba

ok, bon on y arrive :-) Les 2 retour sont ok, donc la au niveau d'ubuntu et de la configuration réseau IP, c'est tout bon !

Pour le mot de passe, ouvre le smb.conf avec cette commande

sudo gedit /etc/samba/smb.conf

dedans tu cherche la ligne

#   security = user

tu la remplace par

security = share

enregistre et ferme gedit.
relance le serveur samba comme cela

sudo service smbd restart

et enfin test ton partage voir si 'il ne demande plus le mdp.


Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#25 Le 28/02/2013, à 19:01

lilp

Re : [Résolus] Pbrs Samba

Nickel, merci bcp pour ton aide et ta patience. smile On trouve tjrs ici des gens patient, agréable et prenant le temps d'expliquer.
Tout fonctionnement parfaitement.


Boitié : Silvertstone Grandria GD06B/Alimentation : Antec Earthwatts Green 380W/Ram : 4Go Kingston ValueRam DDRII PC6400/CG : MSI GeForce GT610 2Go/HDD OS: Seagate Barracuda SATA 2TB 3.5in. HDD/CM :  Intel D946gzis/HDD Data: 2*4To de WD avec 64Mo de cache et 7200trs/mns.
Rsync des data sur 2HDD USB de 2*2To/Timeshift de l'os/Owncloud+Serveur ProjectZomboid+Plex+VPN+Flexget

Hors ligne