Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 08/03/2013, à 08:27

Bruce Wayne

mon bureau Xubuntu plante

Bonjour, régulièrement mon bureau xubuntu plante.
Il se gêle puis redémarre tout seul.

Que faire ?

Merci d'avance.

Dernière modification par Bruce Wayne (Le 08/03/2013, à 08:32)


Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#2 Le 08/03/2013, à 15:49

compte supprimé

Re : mon bureau Xubuntu plante

Plus d'infos ? big_smile Est-ce que tu fais quelque chose de particulier quand ça plante, etc.

#3 Le 08/03/2013, à 19:42

Bruce Wayne

Re : mon bureau Xubuntu plante

Sans rien de particulier... Au bout de 10 minutes a peu près ça bug, avec ou sans programme en route.


Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#4 Le 08/03/2013, à 19:57

The Uploader

Re : mon bureau Xubuntu plante

Salut

As tu testé la mémoire de l'ordinateur ? (memtest86).
(bon dans ce cas je pense que y'aurait un "gel" tout court, mais pas un redémarrage "tout seul" ensuite. Mais on sait jamais).

Que donne la commande :

dmesg

?

Dernière modification par The Uploader (Le 08/03/2013, à 19:59)


- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne

#5 Le 08/03/2013, à 20:05

Bruce Wayne

Re : mon bureau Xubuntu plante

Bon je viens de passer 15 minutes sur internet sans souci est dès que j'ai quitté il a planté. Il freeze puis l'écran devient noir et il se rallume sur la demande de mot de passe pour me connecter à mon bureau.
pour la commande dmesg (accrochez vous c'est assez long) :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-25-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #39-Ubuntu SMP Mon Feb 25 19:02:34 UTC 2013 (Ubuntu 3.5.0-25.39-generic 3.5.7.4)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fee3000-0x000000003feeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003fef0000-0x000000003fefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.5 present.
[    0.000000] DMI: Dell Inc. Inspiron 531/0RY206, BIOS 1.0.3 06/15/2007
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fee0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f4c70-0x000f4c7f] mapped at [c00f4c70]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36328000-0x3718bfff]
[    0.000000] ACPI: RSDP 000f7030 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 3fee3100 0004C (v01 DELL    AS09    42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 3fee9380 000F4 (v03 DELL    AS09    42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 3fee3280 060B7 (v01 DELL    AS09    00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 3fee0000 00040
[    0.000000] ACPI: SLIC 3fee9580 00176 (v01 DELL    AS09    42302E31 AWRD 00000000)
[    0.000000] ACPI: HPET 3fee9740 00038 (v01 DELL    AS09    42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 3fee97c0 0003C (v01 DELL    AS09    42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 3fee94c0 0007C (v01 DELL    AS09    42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 130MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3fedffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3fedffff]
[    0.000000] On node 0 totalpages: 261743
[    0.000000] free_area_init_node: node 0, pgdat c18a4940, node_mem_map f73fd200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 262 pages used for memmap
[    0.000000]   HighMem zone: 33244 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x3ff00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73da000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259697
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic root=UUID=6fb2afb0-865f-435d-b328-e961872ba74b ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2094720 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003fee0)
[    0.000000] Memory: 1010428k/1047424k available (5967k kernel code, 36544k reserved, 2934k data, 756k init, 134024k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18b2000 - 0xc196f000   ( 756 kB)
[    0.000000]       .data : 0xc15d3de4 - 0xc18b1800   (2934 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d3de4   (5967 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2310.404 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4620.80 BogoMIPS (lpj=9241616)
[    0.004008] pid_max: default: 32768 minimum: 301
[    0.004037] Security Framework initialized
[    0.004056] AppArmor: AppArmor initialized
[    0.004058] Yama: becoming mindful.
[    0.004119] Mount-cache hash table entries: 512
[    0.004331] Initializing cgroup subsys cpuacct
[    0.004334] Initializing cgroup subsys memory
[    0.004343] Initializing cgroup subsys devices
[    0.004345] Initializing cgroup subsys freezer
[    0.004347] Initializing cgroup subsys blkio
[    0.004349] Initializing cgroup subsys perf_event
[    0.004377] CPU: Physical Processor ID: 0
[    0.004378] CPU: Processor Core ID: 0
[    0.004381] mce: CPU supports 5 MCE banks
[    0.004390] LVT offset 0 assigned for vector 0xf9
[    0.004393] using AMD E400 aware idle routine
[    0.008545] ACPI: Core revision 20120320
[    0.015095] ftrace: allocating 24614 entries in 49 pages
[    0.024083] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066887] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01
[    0.068003] Performance Events: AMD PMU driver.
[    0.068003] ... version:                0
[    0.068003] ... bit width:              48
[    0.068003] ... generic registers:      4
[    0.068003] ... value mask:             0000ffffffffffff
[    0.068003] ... max period:             00007fffffffffff
[    0.068003] ... fixed-purpose events:   0
[    0.068003] ... event mask:             000000000000000f
[    0.068003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068003] CPU 1 irqstacks, hard=f5cc2000 soft=f5cc4000
[    0.068003] Booting Node   0, Processors  #1 Ok.
[    0.008000] Initializing CPU#1
[    0.152067] Brought up 2 CPUs
[    0.152070] Total of 2 processors activated (9241.76 BogoMIPS).
[    0.152695] devtmpfs: initialized
[    0.152695] EVM: security.selinux
[    0.152695] EVM: security.SMACK64
[    0.152695] EVM: security.capability
[    0.152695] PM: Registering ACPI NVS region [mem 0x3fee0000-0x3fee2fff] (12288 bytes)
[    0.153164] dummy: 
[    0.153204] RTC time:  9:58:33, date: 03/07/13
[    0.153247] NET: Registered protocol family 16
[    0.153304] Trying to unpack rootfs image as initramfs...
[    0.153408] EISA bus registered
[    0.153413] node 0 link 0: io port [a000, ffff]
[    0.153417] TOM: 0000000040000000 aka 1024M
[    0.153419] node 0 link 0: mmio [a0000, bffff]
[    0.153423] node 0 link 0: mmio [40000000, efffffff]
[    0.153425] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.153428] node 0 link 0: mmio [f0000000, f03fffff]
[    0.153431] bus: [00, 03] on node 0 link 0
[    0.153433] bus: 00 [io  0x0000-0xffff]
[    0.153435] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.153437] bus: 00 [mem 0x40000000-0xf3ffffff]
[    0.153439] bus: 00 [mem 0xf4000000-0xfcffffffff]
[    0.153501] ACPI: bus type pci registered
[    0.153568] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.153571] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.153572] PCI: Using MMCONFIG for extended config space
[    0.153574] PCI: Using configuration type 1 for base access
[    0.153707] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.153708] mtrr: probably your BIOS does not setup all CPUs.
[    0.153709] mtrr: corrected configuration.
[    0.154813] bio: create slab <bio-0> at 0
[    0.156037] ACPI: Added _OSI(Module Device)
[    0.156040] ACPI: Added _OSI(Processor Device)
[    0.156042] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156043] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157378] ACPI: EC: Look up EC in DSDT
[    0.162061] ACPI: Interpreter enabled
[    0.162072] ACPI: (supports S0 S3 S4 S5)
[    0.162092] ACPI: Using IOAPIC for interrupt routing
[    0.166894] ACPI: No dock devices found.
[    0.166901] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.167386] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
[    0.168319] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
[    0.168322] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
[    0.168325] pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c7f] (ignored)
[    0.168327] pci_root PNP0A08:00: host bridge window [io  0xa000-0xffff] (ignored)
[    0.168330] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
[    0.168333] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.168335] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xefffffff] (ignored)
[    0.168338] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[    0.168340] PCI: root bus 00: hardware-probed resources
[    0.168376] PCI host bridge to bus 0000:00
[    0.168379] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.168382] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.168385] pci_bus 0000:00: root bus resource [mem 0x40000000-0xf3ffffff]
[    0.168387] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfcffffffff]
[    0.168412] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.168589] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.168629] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.168641] pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
[    0.168657] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.168663] pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
[    0.168692] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.168707] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.168749] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.168759] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[    0.168793] pci 0000:00:02.0: supports D1 D2
[    0.168796] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168809] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.168819] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[    0.168861] pci 0000:00:02.1: supports D1 D2
[    0.168863] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168883] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.168924] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.168935] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[    0.168977] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.168996] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.169018] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.169050] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.169060] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.169065] pci 0000:00:07.0: reg 14: [io  0xec00-0xec07]
[    0.169100] pci 0000:00:07.0: supports D1 D2
[    0.169102] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169117] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.169126] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
[    0.169131] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.169136] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
[    0.169141] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
[    0.169146] pci 0000:00:08.0: reg 20: [io  0xd800-0xd80f]
[    0.169151] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[    0.169187] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.169215] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169233] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.169260] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169282] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.169302] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.169318] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.169335] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.169387] pci 0000:01:0a.0: [14e4:4318] type 00 class 0x028000
[    0.169397] pci 0000:01:0a.0: reg 10: [mem 0xfddfe000-0xfddfffff]
[    0.169455] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.169459] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.169463] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.169467] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff pref]
[    0.169469] pci 0000:00:04.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.169472] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.169475] pci 0000:00:04.0:   bridge window [mem 0x40000000-0xf3ffffff] (subtractive decode)
[    0.169477] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
[    0.169508] pci 0000:02:00.0: [10de:0423] type 00 class 0x030000
[    0.169517] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.169526] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.169536] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.169542] pci 0000:02:00.0: reg 24: [io  0xbc00-0xbc7f]
[    0.169549] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[    0.176023] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.176027] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    0.176030] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.176034] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.176055] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.176059] pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
[    0.176062] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.176066] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.176074] pci_bus 0000:00: on NUMA node 0
[    0.176077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.176181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.176305]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.176309]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.176310] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.194233] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194279] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194324] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[    0.194366] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194410] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194453] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194496] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194540] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 *7 9 10 11 14 15)
[    0.194583] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194627] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194672] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[    0.194716] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[    0.194760] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.194802] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194847] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[    0.194890] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
[    0.194933] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.194978] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.195020] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.195093] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.195160] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.195230] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[    0.195296] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.195363] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.195429] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.195495] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.195562] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[    0.195628] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled.
[    0.195696] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
[    0.195763] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
[    0.195829] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
[    0.195896] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[    0.195963] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
[    0.196037] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
[    0.196104] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
[    0.196171] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
[    0.196238] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
[    0.196304] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0, disabled.
[    0.196427] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.196429] vgaarb: loaded
[    0.196431] vgaarb: bridge control possible 0000:02:00.0
[    0.196687] SCSI subsystem initialized
[    0.196758] libata version 3.00 loaded.
[    0.196784] ACPI: bus type usb registered
[    0.196810] usbcore: registered new interface driver usbfs
[    0.196821] usbcore: registered new interface driver hub
[    0.196856] usbcore: registered new device driver usb
[    0.196960] PCI: Using ACPI for IRQ routing
[    0.198416] PCI: pci_cache_line_size set to 64 bytes
[    0.198478] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.198481] e820: reserve RAM buffer [mem 0x3fee0000-0x3fffffff]
[    0.198593] NetLabel: Initializing
[    0.198595] NetLabel:  domain hash size = 128
[    0.198596] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.198609] NetLabel:  unlabeled traffic allowed by default
[    0.198687] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.198693] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.198698] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.208135] Switching to clocksource hpet
[    0.216736] AppArmor: AppArmor Filesystem Enabled
[    0.216777] pnp: PnP ACPI init
[    0.216796] ACPI: bus type pnp registered
[    0.217362] pnp 00:00: [bus 00-03]
[    0.217366] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.217369] pnp 00:00: [io  0x0000-0x03af window]
[    0.217372] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.217375] pnp 00:00: [io  0x1c00-0x1c7f window]
[    0.217377] pnp 00:00: [io  0xa000-0xffff window]
[    0.217380] pnp 00:00: [io  0x03b0-0x03df window]
[    0.217383] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.217385] pnp 00:00: [mem 0x40000000-0xefffffff window]
[    0.217388] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[    0.217465] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.217485] pnp 00:01: [io  0x1000-0x107f]
[    0.217492] pnp 00:01: [io  0x1080-0x10ff]
[    0.217494] pnp 00:01: [io  0x1400-0x147f]
[    0.217497] pnp 00:01: [io  0x1480-0x14ff]
[    0.217499] pnp 00:01: [io  0x1800-0x187f]
[    0.217502] pnp 00:01: [io  0x1880-0x18ff]
[    0.217557] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.217560] system 00:01: [io  0x1080-0x10ff] has been reserved
[    0.217563] system 00:01: [io  0x1400-0x147f] has been reserved
[    0.217566] system 00:01: [io  0x1480-0x14ff] has been reserved
[    0.217569] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.217572] system 00:01: [io  0x1880-0x18ff] has been reserved
[    0.217576] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217647] pnp 00:02: [io  0x0010-0x001f]
[    0.217650] pnp 00:02: [io  0x0022-0x003f]
[    0.217652] pnp 00:02: [io  0x0044-0x005f]
[    0.217654] pnp 00:02: [io  0x0062-0x0063]
[    0.217657] pnp 00:02: [io  0x0065-0x006f]
[    0.217659] pnp 00:02: [io  0x0074-0x007f]
[    0.217661] pnp 00:02: [io  0x0091-0x0093]
[    0.217664] pnp 00:02: [io  0x00a2-0x00bf]
[    0.217666] pnp 00:02: [io  0x00e0-0x00ef]
[    0.217668] pnp 00:02: [io  0x04d0-0x04d1]
[    0.217671] pnp 00:02: [io  0x0800-0x087f]
[    0.217673] pnp 00:02: [io  0x0294-0x0297]
[    0.217726] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.217729] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.217732] system 00:02: [io  0x0294-0x0297] has been reserved
[    0.217736] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217748] pnp 00:03: [dma 4]
[    0.217751] pnp 00:03: [io  0x0000-0x000f]
[    0.217753] pnp 00:03: [io  0x0080-0x0090]
[    0.217755] pnp 00:03: [io  0x0094-0x009f]
[    0.217758] pnp 00:03: [io  0x00c0-0x00df]
[    0.217788] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.217833] pnp 00:04: [irq 0 disabled]
[    0.217850] pnp 00:04: [irq 8]
[    0.217853] pnp 00:04: [mem 0xfefff000-0xfefff3ff]
[    0.217884] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.217910] pnp 00:05: [io  0x0070-0x0073]
[    0.217943] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.217953] pnp 00:06: [io  0x0061]
[    0.217983] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.217993] pnp 00:07: [io  0x00f0-0x00ff]
[    0.218002] pnp 00:07: [irq 13]
[    0.218032] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.218653] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
[    0.218715] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.218719] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.218848] pnp 00:09: [mem 0x000cce00-0x000cffff]
[    0.218851] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[    0.218853] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[    0.218856] pnp 00:09: [mem 0x000fc000-0x000fffff]
[    0.218858] pnp 00:09: [mem 0xfefff000-0xfefff0ff]
[    0.218861] pnp 00:09: [mem 0x3fee0000-0x3fefffff]
[    0.218864] pnp 00:09: [mem 0xffff0000-0xffffffff]
[    0.218866] pnp 00:09: [mem 0x00000000-0x0009ffff]
[    0.218869] pnp 00:09: [mem 0x00100000-0x3fedffff]
[    0.218871] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.218874] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.218877] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.218879] pnp 00:09: [mem 0xfefff000-0xfeffffff]
[    0.218882] pnp 00:09: [mem 0xfff80000-0xfff80fff]
[    0.218884] pnp 00:09: [mem 0xfff90000-0xfffbffff]
[    0.218887] pnp 00:09: [mem 0xfffed000-0xfffeffff]
[    0.218956] system 00:09: [mem 0x000cce00-0x000cffff] has been reserved
[    0.218960] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.218963] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.218966] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.218969] system 00:09: [mem 0xfefff000-0xfefff0ff] has been reserved
[    0.218972] system 00:09: [mem 0x3fee0000-0x3fefffff] could not be reserved
[    0.218975] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[    0.218978] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.218981] system 00:09: [mem 0x00100000-0x3fedffff] could not be reserved
[    0.218985] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.218988] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.218991] system 00:09: [mem 0xfefff000-0xfeffffff] could not be reserved
[    0.218994] system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.218997] system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.219001] system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.219004] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.219012] pnp: PnP ACPI: found 10 devices
[    0.219014] ACPI: ACPI bus type pnp unregistered
[    0.219017] PnPBIOS: Disabled by ACPI PNP
[    0.255214] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.255219] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.255223] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.255227] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff pref]
[    0.255231] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.255234] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    0.255237] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.255241] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.255244] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.255247] pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
[    0.255251] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.255254] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.255264] pci 0000:00:04.0: setting latency timer to 64
[    0.255271] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.255273] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.255276] pci_bus 0000:00: resource 6 [mem 0x40000000-0xf3ffffff]
[    0.255279] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
[    0.255281] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.255284] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.255287] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref]
[    0.255289] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.255292] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[    0.255295] pci_bus 0000:01: resource 6 [mem 0x40000000-0xf3ffffff]
[    0.255297] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff]
[    0.255300] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.255302] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.255305] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.255308] pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
[    0.255311] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.255313] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.255361] NET: Registered protocol family 2
[    0.255423] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.255621] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.256406] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.256789] TCP: Hash tables configured (established 131072 bind 65536)
[    0.256791] TCP: reno registered
[    0.256795] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.256807] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.256897] NET: Registered protocol family 1
[    0.257146] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.328219] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.344104] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.344157] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.344216] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.344272] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.344333] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.344397] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.344417] pci 0000:02:00.0: Boot video device
[    0.344420] PCI: CLS 32 bytes, default 64
[    0.344813] audit: initializing netlink socket (disabled)
[    0.344826] type=2000 audit(1362650313.340:1): initialized
[    0.367660] highmem bounce pool size: 64 pages
[    0.367676] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.369298] VFS: Disk quotas dquot_6.5.2
[    0.369352] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.369912] fuse init (API version 7.19)
[    0.369992] msgmni has been set to 1711
[    0.370319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.370347] io scheduler noop registered
[    0.370349] io scheduler deadline registered (default)
[    0.370356] io scheduler cfq registered
[    0.370507] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.370561] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.370619] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.370643] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.370791] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.370796] ACPI: Power Button [PWRB]
[    0.370854] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.370857] ACPI: Power Button [PWRF]
[    0.370910] ACPI: Fan [FAN] (on)
[    0.374625] thermal LNXTHERM:00: registered as thermal_zone0
[    0.374628] ACPI: Thermal Zone [THRM] (39 C)
[    0.374666] GHES: HEST is not enabled!
[    0.374790] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.375964] Linux agpgart interface v0.103
[    0.377515] brd: module loaded
[    0.378217] loop: module loaded
[    0.378467] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.378658] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[    0.378692] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.379038] Fixed MDIO Bus: probed
[    0.379093] tun: Universal TUN/TAP device driver, 1.6
[    0.379095] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.379141] PPP generic driver version 2.4.2
[    0.379186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.379223] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.379227] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.379235] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.379257] ehci_hcd 0000:00:02.1: debug port 1
[    0.379263] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[    0.379286] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.379326] isapnp: Scanning for PnP cards...
[    0.428184] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.428209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.428212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.428214] usb usb1: Product: EHCI Host Controller
[    0.428217] usb usb1: Manufacturer: Linux 3.5.0-25-generic ehci_hcd
[    0.428219] usb usb1: SerialNumber: 0000:00:02.1
[    0.428317] hub 1-0:1.0: USB hub found
[    0.428322] hub 1-0:1.0: 10 ports detected
[    0.428398] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.428425] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.428428] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.428436] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.428460] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.486904] Freeing initrd memory: 14736k freed
[    0.502053] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.502057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.502060] usb usb2: Product: OHCI Host Controller
[    0.502063] usb usb2: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[    0.502065] usb usb2: SerialNumber: 0000:00:02.0
[    0.504143] hub 2-0:1.0: USB hub found
[    0.504149] hub 2-0:1.0: 10 ports detected
[    0.504243] uhci_hcd: USB Universal Host Controller Interface driver
[    0.504321] usbcore: registered new interface driver libusual
[    0.504367] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.506795] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.506803] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.506914] mousedev: PS/2 mouse device common for all mice
[    0.507042] rtc_cmos 00:05: RTC can wake from S4
[    0.507194] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.507233] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.507288] device-mapper: uevent: version 1.0.3
[    0.507347] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.507377] EISA: Probing bus 0 at eisa.0
[    0.507380] EISA: Cannot allocate resource for mainboard
[    0.507382] Cannot allocate resource for EISA slot 1
[    0.507384] Cannot allocate resource for EISA slot 2
[    0.507386] Cannot allocate resource for EISA slot 3
[    0.507388] Cannot allocate resource for EISA slot 4
[    0.507390] Cannot allocate resource for EISA slot 5
[    0.507391] Cannot allocate resource for EISA slot 6
[    0.507393] Cannot allocate resource for EISA slot 7
[    0.507395] Cannot allocate resource for EISA slot 8
[    0.507397] EISA: Detected 0 cards.
[    0.507407] cpuidle: using governor ladder
[    0.507409] cpuidle: using governor menu
[    0.507411] EFI Variables Facility v0.08 2004-May-17
[    0.507625] ashmem: initialized
[    0.507758] TCP: cubic registered
[    0.507861] NET: Registered protocol family 10
[    0.508057] NET: Registered protocol family 17
[    0.508070] Key type dns_resolver registered
[    0.508122] Using IPI No-Shortcut mode
[    0.508203] PM: Hibernation image not present or could not be loaded.
[    0.508220] registered taskstats version 1
[    0.510747] Key type trusted registered
[    0.512979] Key type encrypted registered
[    0.515418]   Magic number: 5:900:979
[    0.515543] rtc_cmos 00:05: setting system clock to 2013-03-07 09:58:33 UTC (1362650313)
[    0.515592] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00)
[    0.515601] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.515601] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.515624] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.515626] EDD information not available.
[    0.732425] isapnp: No Plug & Play device found
[    0.732495] Freeing unused kernel memory: 756k freed
[    0.733021] Write protecting the kernel text: 5968k
[    0.733041] Write protecting the kernel read-only data: 2428k
[    0.733043] NX-protecting the kernel data: 4272k
[    0.753152] udevd[89]: starting version 175
[    0.819683] pata_amd 0000:00:06.0: version 0.4.1
[    0.819753] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.836123] scsi0 : pata_amd
[    0.837230] scsi1 : pata_amd
[    0.837675] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.837679] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.837856] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.838009] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    0.838019] forcedeth 0000:00:07.0: setting latency timer to 64
[    0.856058] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[    0.858297] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    0.876068] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.876082] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    0.876087] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    0.876092] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    0.876097] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    0.916087] ssb: Sonics Silicon Backplane found on PCI device 0000:01:0a.0
[    1.003004] ata2: port disabled--ignoring
[    1.046437] usb 1-5: New USB device found, idVendor=0644, idProduct=0200
[    1.046443] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.046446] usb 1-5: Product: CA-200
[    1.046448] usb 1-5: Manufacturer: TEAC
[    1.046451] usb 1-5: SerialNumber: 00000210D00A
[    1.048652] Initializing USB Mass Storage driver...
[    1.048965] scsi2 : usb-storage 1-5:1.0
[    1.049062] usbcore: registered new interface driver usb-storage
[    1.049064] USB Mass Storage support registered.
[    1.360600] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:a0:5a:58:8e
[    1.360605] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.360644] sata_nv 0000:00:08.0: version 3.5
[    1.360728] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.361327] scsi3 : sata_nv
[    1.361537] scsi4 : sata_nv
[    1.361670] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
[    1.361673] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
[    1.460018] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[    1.683048] usb 2-1: New USB device found, idVendor=413c, idProduct=2105
[    1.683051] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.683053] usb 2-1: Product: Dell USB Keyboard
[    1.683056] usb 2-1: Manufacturer: Dell
[    1.828053] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.836230] ata3.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133
[    1.836233] ata3.00: 488281250 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.844204] ata3.00: configured for UDMA/133
[    1.844380] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
[    1.844555] sd 3:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[    1.844600] sd 3:0:0:0: [sda] Write Protect is off
[    1.844604] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.844618] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.844624] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.901889]  sda: sda1 sda2 < sda5 >
[    1.902257] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.000016] usb 2-8: new full-speed USB device number 3 using ohci_hcd
[    2.058201] scsi 2:0:0:0: Direct-Access     TEAC     USB   HS-CF Card 4.08 PQ: 0 ANSI: 0
[    2.061824] scsi 2:0:0:1: Direct-Access     TEAC     USB   HS-xD/SM   4.08 PQ: 0 ANSI: 0
[    2.065578] scsi 2:0:0:2: Direct-Access     TEAC     USB   HS-MS Card 4.08 PQ: 0 ANSI: 0
[    2.068703] scsi 2:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.08 PQ: 0 ANSI: 0
[    2.069371] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.069534] sd 2:0:0:1: Attached scsi generic sg2 type 0
[    2.069691] sd 2:0:0:2: Attached scsi generic sg3 type 0
[    2.069833] sd 2:0:0:3: Attached scsi generic sg4 type 0
[    2.196823] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    2.201442] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[    2.205941] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[    2.210570] sd 2:0:0:3: [sde] Attached SCSI removable disk
[    2.221053] usb 2-8: New USB device found, idVendor=046d, idProduct=c52f
[    2.221059] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.221062] usb 2-8: Product: USB Receiver
[    2.221065] usb 2-8: Manufacturer: Logitech
[    2.250097] usbcore: registered new interface driver usbhid
[    2.250102] usbhid: USB HID core driver
[    2.252847] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
[    2.252981] hid-generic 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-1/input0
[    2.253428] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input3
[    2.253560] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8/input0
[    2.258145] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.1/input/input4
[    2.258310] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-8/input1
[    2.312044] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.320133] ata4.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
[    2.336118] ata4.00: configured for UDMA/100
[    2.338265] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
[    2.341002] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.341005] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.341144] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.341276] sr 4:0:0:0: Attached scsi generic sg5 type 5
[    2.784516] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.784523] EXT4-fs (sda1): write access will be enabled during recovery
[    4.430800] EXT4-fs (sda1): recovery complete
[    4.433141] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.128351] Adding 1046524k swap on /dev/sda5.  Priority:-1 extents:1 across:1046524k 
[    8.962980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.672342] udevd[392]: starting version 175
[   11.523493] lp: driver loaded but no devices found
[   11.972943] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.363013] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   12.486784] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.486825] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[   12.771118] microcode: AMD CPU family 0xf not supported
[   12.907957] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   13.214023] cfg80211: Calling CRDA to update world regulatory domain
[   13.226053] kvm: disabled by bios
[   14.369962] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   14.369972] hda_intel: Disabling MSI
[   14.370004] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   14.427134] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   14.492128] Broadcom 43xx driver loaded [ Features: PNL ]
[   14.921294] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   14.921362] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[   14.921423] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   15.279962] cfg80211: World regulatory domain updated:
[   15.279969] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.279972] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.279974] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.279976] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.279978] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.279981] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.805666] type=1400 audit(1362650328.788:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=695 comm="apparmor_parser"
[   15.805692] type=1400 audit(1362650328.788:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=682 comm="apparmor_parser"
[   15.806127] type=1400 audit(1362650328.788:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=695 comm="apparmor_parser"
[   15.806160] type=1400 audit(1362650328.788:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
[   15.806386] type=1400 audit(1362650328.788:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=695 comm="apparmor_parser"
[   15.806426] type=1400 audit(1362650328.788:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
[   16.218413] nvidia: module license 'NVIDIA' taints kernel.
[   16.218421] Disabling lock debugging due to kernel taint
[   16.245106] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   16.245142] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.245624] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.43  Sun Aug 19 20:20:21 PDT 2012
[   16.368206] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[   16.368387] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   16.368538] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   16.368683] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   16.368826] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   16.368976] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   16.369124] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   16.369266] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[   16.824676] init: failsafe main process (791) killed by TERM signal
[   18.708826] type=1400 audit(1362650331.688:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=888 comm="apparmor_parser"
[   18.709311] type=1400 audit(1362650331.688:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=888 comm="apparmor_parser"
[   18.709578] type=1400 audit(1362650331.688:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=888 comm="apparmor_parser"
[   19.219783] ppdev: user-space parallel port driver
[   19.302419] type=1400 audit(1362650332.284:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=887 comm="apparmor_parser"
[   20.436834] init: udev-fallback-graphics main process (936) terminated with status 1
[   20.613823] Bluetooth: Core ver 2.16
[   20.613861] NET: Registered protocol family 31
[   20.613864] Bluetooth: HCI device and connection manager initialized
[   20.613867] Bluetooth: HCI socket layer initialized
[   20.613869] Bluetooth: L2CAP socket layer initialized
[   20.613874] Bluetooth: SCO socket layer initialized
[   20.810604] Bluetooth: RFCOMM TTY layer initialized
[   20.810612] Bluetooth: RFCOMM socket layer initialized
[   20.810614] Bluetooth: RFCOMM ver 1.11
[   20.838710] audit_printk_skb: 18 callbacks suppressed
[   20.838716] type=1400 audit(1362650333.820:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=889 comm="apparmor_parser"
[   20.844351] type=1400 audit(1362650333.824:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=889 comm="apparmor_parser"
[   20.845767] type=1400 audit(1362650333.824:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=889 comm="apparmor_parser"
[   20.849134] type=1400 audit(1362650333.828:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=889 comm="apparmor_parser"
[   20.849989] type=1400 audit(1362650333.828:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=889 comm="apparmor_parser"
[   20.852244] type=1400 audit(1362650333.832:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=889 comm="apparmor_parser"
[   21.016999] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.017004] Bluetooth: BNEP filters: protocol multicast
[   22.880407] init: smbd main process (804) killed by HUP signal
[   22.880443] init: smbd main process ended, respawning
[   26.282225] forcedeth 0000:00:07.0: irq 42 for MSI/MSI-X
[   26.282263] forcedeth 0000:00:07.0: eth0: MSI enabled
[   31.944168] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[   32.409317] init: plymouth-upstart-bridge main process (897) killed by TERM signal
[45568.408270] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000548 3f800000 00000080
[45610.082415] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 000015e0 00000000 00000080
[45651.432559] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[45803.426987] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 41200000 00000080
[45844.893817] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[46322.108425] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 40a00000 00000080
[46386.637567] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 000015e0 00000000 00000080
[46427.965724] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[46522.338637] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 40a00000 00000080
[46563.765184] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[57056.098353] forcedeth 0000:00:07.0: eth0: link down
[57058.762710] forcedeth 0000:00:07.0: eth0: link up
[57102.532764] forcedeth 0000:00:07.0: eth0: link down
[57104.217107] forcedeth 0000:00:07.0: eth0: link up
[77443.516490] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 41200000 00000080
[77488.589843] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[77832.781473] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 41200000 00000080
[77874.276544] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[89770.123941] usb 2-8: USB disconnect, device number 3
[89806.064046] usb 2-10: new low-speed USB device number 4 using ohci_hcd
[89806.278368] usb 2-10: New USB device found, idVendor=04b4, idProduct=aef4
[89806.278375] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[89806.278379] usb 2-10: Product: Arvel USB Email Mouse
[89806.278381] usb 2-10: Manufacturer: Arvel USB Email Mouse
[89806.296881] input: Arvel USB Email Mouse Arvel USB Email Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input13
[89806.297087] hid-generic 0003:04B4:AEF4.0004: input,hidraw1: USB HID v1.00 Mouse [Arvel USB Email Mouse Arvel USB Email Mouse] on usb-0000:00:02.0-10/input0
[90424.583543] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 41200000 00000080
[90468.086995] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d
[118884.786150] NVRM: Xid (0000:02:00): 13, 0001 00000000 00005097 00000f04 41200000 00000080
[118926.352029] NVRM: GPU at 0000:02:00: GPU-80a0513b-2abf-99e6-20b2-53306a02bb0d

Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#6 Le 08/03/2013, à 20:09

The Uploader

Re : mon bureau Xubuntu plante

Je penche plutôt pour un problème logiciel alors.

Que donne le contenu de ~/.xsession-errors ?


- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne

#7 Le 08/03/2013, à 20:18

Bruce Wayne

Re : mon bureau Xubuntu plante

il me dit Permission non accordée


Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#8 Le 08/03/2013, à 20:21

The Uploader

Re : mon bureau Xubuntu plante

Tu devrais avoir la permission.

Que donne le retour de :

ls -l

- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne

#9 Le 08/03/2013, à 20:23

Bruce Wayne

Re : mon bureau Xubuntu plante

Bureau
Document1.bak~
Documents
Dropbox
Images
Modèles
Musique
Public
Téléchargements
Vidéos

Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#10 Le 11/03/2013, à 14:17

lostec

Re : mon bureau Xubuntu plante

Si proc ivy bridge il y a un souci avec le kernel 3.2 si tu es en LTS 12.04... Et comme xubuntu ne propose pas un 3.5 en linux-hwe comme la version Ubuntu les adeptes de la LTS sont plantes... Debian 7 idem...

Hors ligne

#11 Le 11/03/2013, à 14:53

The Uploader

Re : mon bureau Xubuntu plante

Bruce Wayne a écrit :

il me dit Permission non accordée

Tu devrais avoir les droits sur tout ton dossier ~ (c'est à dire /home/nomd'utilisateur)

Pour les rétablir :

sudo chown TonNomd'Utilisateur:TonNomd'Utilisateur ~ -r

Remplacer "TonNomd'Utilisateur" par ton vrai nom d'utilisateur.

Il peut t'être donné par cette commande :

whoami

Peut-être que ça règlera ton problème.


- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne

#12 Le 11/03/2013, à 23:47

Bruce Wayne

Re : mon bureau Xubuntu plante

Bon d'abord merci pour votre aide.

Pour le moment avec la commande

sudo chown TonNomd'Utilisateur:TonNomd'Utilisateur ~ -r

en ayant bien sur mis mon nom d'utilisateur trouvé avec whoami, il me répond :

chown : option invalide -- 'r'

J'ai remplacé -r par -R et il ne se passe rien, il me redonne les "commandes" mais si je tape

bruce@Wayne-Corp:~$ ~/.xsession-errors

, il me répond toujours "permission non accordée".

on est d'accord que -r se fait avec le 6 ? et que entre les deux points j'ai deux fois le même non d'utilisateur ?

Je suis encore très novice avec linux (je ne comprend d'ailleurs pas la réponse de lostec). Mais c'est un système d'exploitation que je souhaiterai réellement faire fonctionner sur mon ordi.

bonne soirée et à très vite.


Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#13 Le 12/03/2013, à 00:05

The Uploader

Re : mon bureau Xubuntu plante

Ah désolé c'est "--recursive" :

La syntaxe de chown c'est :

chown <options> nomd'utilisateur:groupe <dossier>

Le groupe dans ton cas (comme chez moi d'ailleurs) porte le même nom que ton nom d'utilisateur. Cela donne donc :

sudo chown --recursive TonNomD'utilisateur:TonNomD'utilisateur ~

D'aileurs la commande :

groups

devrait donner tous les groups auxquels tu appartiens, si ça t"intéresse.

Bruce Wayne a écrit :

Je suis encore très novice avec linux (je ne comprend d'ailleurs pas la réponse de lostec). Mais c'est un système d'exploitation que je souhaiterai réellement faire fonctionner sur mon ordi.

Si j'ai bien compris, lostec parle d'un cas d'incompatibilité entre le kernel linux 3.5 et les cartes mères à base de chipset Ivy Bridge. Les versions 12.04 d'Ubuntu propose justement le kernel linux en version 3.5. Si ta carte mère est basé sur un chipset Ivy Bridge, ton problème peut venir de cette incompatibilité.

Cependant pour le moment si tu as une partie de ton home qui appartient à root:root (le compte 'administrateur'), ben ça peut donner lieu à ton problème de session qui reboot (voire de session qui ne s'ouvre pas comme cela s'est déjà vu sur ce forum).

Sinon la documentation explique pas mal de concepts de base, dont les permissions et les droits d'accès aux fichiers. wink

Dernière modification par The Uploader (Le 12/03/2013, à 00:15)


- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne

#14 Le 12/03/2013, à 21:44

Bruce Wayne

Re : mon bureau Xubuntu plante

Bon toujours au même point, si je rentre la commande

sudo chown --recursive bruce:bruce ~

il me redonne la main et je n'ai toujours pas la permission.

avec la commande groups

bruce adm cdrom sudo dip plugdev lpadmin sambashare

...


Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#15 Le 12/03/2013, à 22:08

The Uploader

Re : mon bureau Xubuntu plante

C'est peut-être un problème de droits d'accès et non de propriétaire:groupe :

sudo chmod --recursive 700 ~

- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne

#16 Le 13/03/2013, à 09:51

Bruce Wayne

Re : mon bureau Xubuntu plante

ok maintenant la commande

~/.xsession-errors

  me donne

bash: /home/bruce/.xsession-errors: Fichier texte occupé

Intel® Core™ i5-6300U CPU @ 2.40GHz × 4
16Go de Ram
Mesa Intel® HD Graphics 520 (SKL GT2)
Ubuntu 22.04.1 LTS - 64bits - Version Gnome 42.5

Hors ligne

#17 Le 17/03/2013, à 16:04

The Uploader

Re : mon bureau Xubuntu plante

Salut

Est- ce que tu peux te déconnecter de Xfce, aller en console TTY (Ctrl + Alt + F1 au clavier), t'identifier, et faire ceci :

rm ~/.ICEAuthority
rm ~/.Xauthority
rm ~/.xsession-errors

Peux tu aussi donner le retour de cette commande :

df -h

Pour vérifier l'espace disque libre.

Dernière modification par The Uploader (Le 17/03/2013, à 16:05)


- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10

Hors ligne