#1 Le 06/04/2013, à 19:57
- rayquaza
Problème pour agrandissement d'une partition NTFS
Bonjour.
Mon ordinateur a Ubuntu 12.10 x86-64 et Windows 7 x86. J'ai un liceCD de Xubtuntu 12.04 et un livreUSB de Xubuntu 12.10.
Ma partition pour les données est en NTFS. Je ne compte pas changer le système de fichiers pour rester compatible avec Windows.
Cette partition est dans une partition étendue qui contient tout sauf Windows.
Elle n'a plus de places : quelques Go sur 700Go. J'aimerais donc l'augmenter. J'ai pris de l'espace (50Go) à ma partition Windows et l'ai mis dans la partition étendue.
Le problème est que la partition pour mes données à des secteurs défectueux d’après Gparted. J'ai donc défragmenté de nombreuses fois (avec l'outil Windows) et tenter de récupérer les secteurs défectueux (encore une fois avec Windows). Mais Gparted voit toujours des secteurs défectueux.
Comment faire pour agrandir ma partition pour les données avec les 50Go d'espace non alloué qui sont à coté ?
Les outils en ligne de commande pour les partitions me semble compliqué. Je ne veux pas prendre de risque, je veux bien en utiliser pour avoir des informations, pas pour modifier les partitions.
J'ai ntfsprogs et ntfs-3g.
Merci.
Dernière modification par rayquaza (Le 06/04/2013, à 20:03)
rayquaza devient RyDroid
Hors ligne
#2 Le 06/04/2013, à 22:58
- JLK
Re : Problème pour agrandissement d'une partition NTFS
Salut.
Je propose de regarder les données SMART depuis Xubuntu, vu que tu sembles avoir des secteurs défectueux.
Installe smartmontools depuis un terminal :
sudo apt-get install smartmontools
Puis retourne-nous la commande :
sudo smartctl -a /dev/sda
Hors ligne
#3 Le 06/04/2013, à 23:36
- rayquaza
Re : Problème pour agrandissement d'une partition NTFS
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-25-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJDWS779198
LU WWN Device Id: 5 0024e9 001d06dd2
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Sun Apr 7 00:32:26 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13532) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 057 051 Pre-fail Always - 277
3 Spin_Up_Time 0x0007 067 067 011 Pre-fail Always - 10650
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1403
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3390
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1389
13 Read_Soft_Error_Rate 0x000e 099 057 000 Old_age Always - 268
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2365
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 051 000 Old_age Always - 38 (Min/Max 13/45)
194 Temperature_Celsius 0x0022 062 046 000 Old_age Always - 38 (Min/Max 13/50)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2668434
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 12
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0SMART Error Log Version: 1
No Errors LoggedSMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Par envie de dormir, je l'ai exécuté sur mon Ubuntu installé sur ma machine. Si cela change quelque chose de le faire via un liveOS, dites le moi, je le ferais cet après-midi.
Merci.
rayquaza devient RyDroid
Hors ligne
#4 Le 07/04/2013, à 00:19
- JLK
Re : Problème pour agrandissement d'une partition NTFS
Ubuntu 12.10, installé sur mon DD a écrit :smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-25-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJDWS779198
LU WWN Device Id: 5 0024e9 001d06dd2
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Sun Apr 7 00:32:26 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13532) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 057 051 Pre-fail Always - 277
3 Spin_Up_Time 0x0007 067 067 011 Pre-fail Always - 10650
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1403
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3390
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1389
13 Read_Soft_Error_Rate 0x000e 099 057 000 Old_age Always - 268
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2365
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 051 000 Old_age Always - 38 (Min/Max 13/45)
194 Temperature_Celsius 0x0022 062 046 000 Old_age Always - 38 (Min/Max 13/50)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2668434
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 12
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0SMART Error Log Version: 1
No Errors LoggedSMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Par envie de dormir, je l'ai exécuté sur mon Ubuntu installé sur ma machine. Si cela change quelque chose de le faire via un liveOS, dites le moi, je le ferais cet après-midi.
Merci.
D'après smartctl, il y a bien des secteurs défectueux dont 2 en cours de réallocation sur la zone de réserve.
Avant de faire quoi que ce soit, je te propose d'effectuer deux tests, un cours et un long (soit un total d'un peu moins de 4 heures), soit :
sudo smartcl -t short /dev/sda
puis une fois que le délai sera terminé, tape :
sudo smartctl -t short /dev/sda
Dernière modification par JLK (Le 07/04/2013, à 16:12)
Hors ligne
#5 Le 07/04/2013, à 16:11
- rayquaza
Re : Problème pour agrandissement d'une partition NTFS
"smartcl" : oubli du "t" : "smartcl"
Je suppose que pour la deuxième opération le paramètre est "-long" et non "-short".
J'ai fait avec -short, ça a pris 2 minutes. Mais comment je récupère le résultat ? Relancer la commande a refait le test.
Merci.
rayquaza devient RyDroid
Hors ligne
#6 Le 07/04/2013, à 16:14
- JLK
Re : Problème pour agrandissement d'une partition NTFS
"smartcl" : oubli du "t" : "smartcl"
Je suppose que pour la deuxième opération le paramètre est "-long" et non "-short".J'ai fait avec -short, ça a pris 2 minutes. Mais comment je récupère le résultat ? Relancer la commande a refait le test.
Merci.
Corrigé.
Refais un smartctl -a /dev/sda après les tests.
Ton disque dur problématique est sur un portable ou sur un PC de bureau (tour) ?
Dernière modification par JLK (Le 07/04/2013, à 16:14)
Hors ligne
#7 Le 07/04/2013, à 16:31
- rayquaza
Re : Problème pour agrandissement d'une partition NTFS
Mon disque dur est sur une tour.
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-25-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJDWS779198
LU WWN Device Id: 5 0024e9 001d06dd2
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Sun Apr 7 17:29:14 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 114) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (13532) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 057 051 Pre-fail Always - 280
3 Spin_Up_Time 0x0007 070 070 011 Pre-fail Always - 9720
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1406
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10173
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3393
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1392
13 Read_Soft_Error_Rate 0x000e 099 057 000 Old_age Always - 269
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2366
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 060 051 000 Old_age Always - 40 (Min/Max 40/40)
194 Temperature_Celsius 0x0022 061 046 000 Old_age Always - 39 (Min/Max 39/40)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 12621
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 12
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0SMART Error Log Version: 1
No Errors LoggedSMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 20% 3393 760163264
# 2 Short offline Completed: read failure 20% 3390 760163264
# 3 Short offline Completed: read failure 20% 3390 760163264SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Je ferais la version longue ce soir.
rayquaza devient RyDroid
Hors ligne
#8 Le 07/04/2013, à 16:35
- JLK
Re : Problème pour agrandissement d'une partition NTFS
Je vois que dans les dernières lignes que le tes court indique un problème de lecture. Bizarre.
Tu as bien respecté le délai imposé (2 minutes) ?
OK tiens-nous au courant du résultat.
Hors ligne
#9 Le 07/04/2013, à 22:11
- rayquaza
Re : Problème pour agrandissement d'une partition NTFS
J'ai rescpecté le délais.
Au cas ou, j'ai refait avec l'option short, mais sous un liveCD Xubuntu 12.04 mis à jour.
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJDWS779198
LU WWN Device Id: 5 0024e9 001d06dd2
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Sun Apr 7 21:10:18 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 114) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (13532) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 057 051 Pre-fail Always - 282
3 Spin_Up_Time 0x0007 068 068 011 Pre-fail Always - 10300
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1407
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10364
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3398
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1393
13 Read_Soft_Error_Rate 0x000e 099 057 000 Old_age Always - 270
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2367
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 061 051 000 Old_age Always - 39 (Min/Max 31/41)
194 Temperature_Celsius 0x0022 061 046 000 Old_age Always - 39 (Min/Max 30/48)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 702489
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 12
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 20% 3398 760163264
# 2 Short offline Completed: read failure 20% 3398 760163264
# 3 Short offline Completed: read failure 20% 3393 760163264
# 4 Short offline Completed: read failure 20% 3390 760163264
# 5 Short offline Completed: read failure 20% 3390 760163264
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Pour le long, je ne peux pour l'instant pas.
rayquaza devient RyDroid
Hors ligne
#10 Le 07/04/2013, à 22:36
- JLK
Re : Problème pour agrandissement d'une partition NTFS
Visiblement, le test court semble s'arrêter.
Et que dit le test long ?
Hors ligne
#11 Le 21/04/2013, à 01:29
- rayquaza
Re : Problème pour agrandissement d'une partition NTFS
J'ai enfin eu le temps de faire avec la version longue. Voila le résultat :
xubuntu@xubuntu:~$ sudo smartctl -t short /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Sat Apr 20 20:12:06 2013
Use smartctl -X to abort test.
xubuntu@xubuntu:~$ sudo smartctl -X
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
ERROR: smartctl requires a device name as the final command-line argument.
Use smartctl -h to get a usage summary
xubuntu@xubuntu:~$ sudo smartctl -X /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Abort SMART off-line mode self-test routine".
Self-testing aborted!
xubuntu@xubuntu:~$ sudo smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 226 minutes for test to complete.
Test will complete after Sat Apr 20 23:57:02 2013
Use smartctl -X to abort test.
xubuntu@xubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJDWS779198
LU WWN Device Id: 5 0024e9 001d06dd2
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Sun Apr 21 00:26:53 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (13532) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 057 051 Pre-fail Always - 283
3 Spin_Up_Time 0x0007 067 067 011 Pre-fail Always - 10720
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1414
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10620
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3414
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1400
13 Read_Soft_Error_Rate 0x000e 099 057 000 Old_age Always - 271
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2368
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 051 000 Old_age Always - 38 (Min/Max 11/39)
194 Temperature_Celsius 0x0022 062 046 000 Old_age Always - 38 (Min/Max 11/41)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 33796
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 12
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 3409 760163264
# 2 Short offline Aborted by host 30% 3409 -
# 3 Short offline Completed: read failure 20% 3398 760163264
# 4 Short offline Completed: read failure 20% 3398 760163264
# 5 Short offline Completed: read failure 20% 3393 760163264
# 6 Short offline Completed: read failure 20% 3390 760163264
# 7 Short offline Completed: read failure 20% 3390 760163264
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
rayquaza devient RyDroid
Hors ligne
#12 Le 21/04/2013, à 02:06
- JLK
Re : Problème pour agrandissement d'une partition NTFS
Visiblement, il y a un problème sur le disque dur qui empêche le partitionnement.
Hors ligne
#13 Le 21/04/2013, à 14:55
- rayquaza
Re : Problème pour agrandissement d'une partition NTFS
Y a t'il un moyen de corriger ce problème ? Peut on en savoir plus ?
Merci.
rayquaza devient RyDroid
Hors ligne
#14 Le 21/04/2013, à 14:59
- JLK
Re : Problème pour agrandissement d'une partition NTFS
Y a t'il un moyen de corriger ce problème ? Peut on en savoir plus ?
Merci.
Tu poses-là une bonne question... dont je n'ai pas la réponse... car tout semble être un problème matériel (erreurs probablement sur le disque dur)... Je pense qu'une sauvegarde des données s'impose.
Une recherche te sera nécessaire...
Hors ligne