Demarrage Kubuntu en 2 temps

carpediem · Le 11/11/2007, à 08:54

Salut à tous, lors du démarrage, kubuntu s'arrête et je suis obligé de taper ctrl+d pour poursuivre son lancement. Que doit-je faire pour y remedier. J'ai ce problème depuis que j'ai installé Suse 10.3 en double boot.
merci de votre aide

Dernière modification par carpediem (Le 11/11/2007, à 09:57)

carpediem · Le 13/11/2007, à 10:03

UP svp

jajaX · Le 13/11/2007, à 11:20

salut

dans /var/logs, regarde le fichier dmesg (avec kate) et essaie de voir ou ça bloque. si tu trouves rien, copie/colle le ici

Dernière modification par jajaX (Le 13/11/2007, à 11:20)

carpediem · Le 13/11/2007, à 13:06

Salut jajaX, et merci de ton aide.
je te copie le fichier dmesg

[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[    0.000000]  BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f67a0
[    0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   130928
[    0.000000]   HighMem    130928 ->   130928
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   130928
[    0.000000] On node 0 totalpages: 130928
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 990 pages used for memmap
[    0.000000]   Normal zone: 125842 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F67B0 checksum 0
[    0.000000] ACPI: RSDP 000F67B0, 0014 (r0 HP    )
[    0.000000] ACPI: RSDT 1FF73896, 0034 (r1     HP   RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 1FF7AECF, 0074 (r1 HP     SPDG      6040000 PTL         3)
[    0.000000] ACPI: DSDT 1FF738CA, 7605 (r1  HP    SPRGDALE  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 1FF7BFC0, 0040
[    0.000000] ACPI: APIC 1FF7AF43, 005E (r1 HP     	 APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 1FF7AFA1, 0028 (r1     HP $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SSDT 1FF7AFC9, 0037 (r1 HP     ACPIHT    6040000  LTP        1)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] Built 1 zonelists.  Total pages: 129906
[    0.000000] Kernel command line: root=UUID=6142ead9-2b72-44db-ac31-2cb287466400 ro quiet splash locale=fr_FR
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 2793.404 MHz processor.
[    8.764079] Console: colour VGA+ 80x25
[    8.764328] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    8.764549] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    8.773287] Memory: 507404k/523712k available (2015k kernel code, 15756k reserved, 916k data, 364k init, 0k highmem)
[    8.773297] virtual kernel memory layout:
[    8.773298]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    8.773299]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    8.773301]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[    8.773301]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
[    8.773302]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    8.773303]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[    8.773304]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[    8.773308] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    8.773343] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    8.853235] Calibrating delay using timer specific routine.. 5590.90 BogoMIPS (lpj=11181814)
[    8.853258] Security Framework v1.0.0 initialized
[    8.853265] SELinux:  Disabled at boot.
[    8.853278] Mount-cache hash table entries: 512
[    8.853408] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[    8.853420] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    8.853423] CPU: L2 cache: 512K
[    8.853425] CPU: Physical Processor ID: 0
[    8.853427] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
[    8.853438] Compat vDSO mapped to ffffe000.
[    8.853451] Checking 'hlt' instruction... OK.
[    8.869315] SMP alternatives: switching to UP code
[    8.869735] Early unpacking initramfs... done
[    9.164347] ACPI: Core revision 20070126
[    9.164412] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    9.175369] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[    9.175388] SMP alternatives: switching to SMP code
[    9.175527] Booting processor 1/1 eip 3000
[    9.185584] Initializing CPU#1
[    9.264574] Calibrating delay using timer specific routine.. 5586.81 BogoMIPS (lpj=11173622)
[    9.264584] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[    9.264594] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    9.264597] CPU: L2 cache: 512K
[    9.264599] CPU: Physical Processor ID: 0
[    9.264602] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
[    9.264866] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[    9.264905] Total of 2 processors activated (11177.71 BogoMIPS).
[    9.265037] ENABLING IO-APIC IRQs
[    9.265223] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[    9.412469] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    9.432454] Brought up 2 CPUs
[    9.485394] migration_cost=141
[    9.485579] Booting paravirtualized kernel on bare hardware
[    9.485648] Time: 10:58:39  Date: 10/13/107
[    9.485670] NET: Registered protocol family 16
[    9.485779] EISA bus registered
[    9.485785] ACPI: bus type pci registered
[    9.487180] PCI: PCI BIOS revision 2.10 entry at 0xfd972, last bus=2
[    9.487182] PCI: Using configuration type 1
[    9.487184] Setting up standard PCI resources
[    9.491674] ACPI: EC: Look up EC in DSDT
[    9.493474] ACPI: EC: GPE=0x1d, ports=0x66, 0x62
[    9.494571] ACPI: Interpreter enabled
[    9.494575] ACPI: (supports S0 S3 S4 S5)
[    9.494594] ACPI: Using IOAPIC for interrupt routing
[    9.503778] ACPI: EC: GPE=0x1d, ports=0x66, 0x62
[    9.503843] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    9.503855] PCI: Probing PCI hardware (bus 00)
[    9.504303] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    9.504308] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[    9.504891] PCI: Transparent bridge - 0000:00:1e.0
[    9.504980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    9.505139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    9.505238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[    9.509974] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *5
[    9.510067] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
[    9.510155] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *10 11 14 15)
[    9.510243] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
[    9.510334] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *4
[    9.510425] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *10 11 14 15)
[    9.510516] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[    9.510609] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15)
[    9.510746] Linux Plug and Play Support v0.97 (c) Adam Belay
[    9.510760] pnp: PnP ACPI init
[    9.510771] ACPI: bus type pnp registered
[    9.515769] pnp: PnP ACPI: found 10 devices
[    9.515773] ACPI: ACPI bus type pnp unregistered
[    9.515777] PnPBIOS: Disabled by ACPI PNP
[    9.515855] PCI: Using ACPI for IRQ routing
[    9.515859] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    9.520999] NET: Registered protocol family 8
[    9.521002] NET: Registered protocol family 20
[    9.521103] pnp: 00:01: iomem range 0xfecf0000-0xfecfffff has been reserved
[    9.521106] pnp: 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    9.521110] pnp: 00:01: iomem range 0xff800000-0xffffffff could not be reserved
[    9.524189] Time: tsc clocksource has been installed.
[    9.551493] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
[    9.551551] PCI: Bridge: 0000:00:01.0
[    9.551553]   IO window: disabled.
[    9.551557]   MEM window: d1000000-d1ffffff
[    9.551562]   PREFETCH window: e0000000-efffffff
[    9.551570] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[    9.551572]   IO window: 00003400-000034ff
[    9.551576]   IO window: 00003800-000038ff
[    9.551580]   PREFETCH window: 30000000-33ffffff
[    9.551585]   MEM window: 38000000-3bffffff
[    9.551589] PCI: Bridge: 0000:00:1e.0
[    9.551592]   IO window: 3000-3fff
[    9.551598]   MEM window: d2000000-d23fffff
[    9.551602]   PREFETCH window: 30000000-33ffffff
[    9.551619] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    9.551639] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 16
[    9.551655] NET: Registered protocol family 2
[    9.588238] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    9.588277] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[    9.588365] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    9.588429] TCP: Hash tables configured (established 16384 bind 16384)
[    9.588432] TCP reno registered
[    9.600320] checking if image is initramfs... it is
[   10.051358] Switched to high resolution mode on CPU 0
[   10.051460] Switched to high resolution mode on CPU 1
[   10.191961] Freeing initrd memory: 7342k freed
[   10.192086] Simple Boot Flag at 0x36 set to 0x1
[   10.192375] audit: initializing netlink socket (disabled)
[   10.192389] audit(1194951520.128:1): initialized
[   10.195107] VFS: Disk quotas dquot_6.5.1
[   10.195176] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.195288] io scheduler noop registered
[   10.195291] io scheduler anticipatory registered
[   10.195293] io scheduler deadline registered
[   10.195309] io scheduler cfq registered (default)
[   10.195486] Boot video device is 0000:01:00.0
[   10.195686] isapnp: Scanning for PnP cards...
[   10.549018] isapnp: No Plug & Play device found
[   10.577953] Real Time Clock Driver v1.12ac
[   10.578072] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   10.578296] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[   10.578931] ACPI: PCI Interrupt 0000:00:1f.6[b] -> GSI 17 (level, low) -> IRQ 16
[   10.578939] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[   10.579648] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   10.579923] input: Macintosh mouse button emulation as /class/input/input0
[   10.580030] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   10.584915] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.584925] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.585144] mice: PS/2 mouse device common for all mice
[   10.585296] EISA: Probing bus 0 at eisa.0
[   10.585305] Cannot allocate resource for EISA slot 1
[   10.585308] Cannot allocate resource for EISA slot 2
[   10.585310] Cannot allocate resource for EISA slot 3
[   10.585333] EISA: Detected 0 cards.
[   10.585432] TCP cubic registered
[   10.585443] NET: Registered protocol family 1
[   10.585467] Using IPI No-Shortcut mode
[   10.585647]   Magic number: 15:508:982
[   10.585664]   hash matches device ttyc9
[   10.586133] Freeing unused kernel memory: 364k freed
[   10.619022] input: AT Translated Set 2 keyboard as /class/input/input1
[   11.821951] AppArmor: AppArmor initialized<5>audit(1194951521.628:2):  type=1505 info="AppArmor initialized" pid=1201
[   11.829047] fuse init (API version 7.8)
[   11.834479] Failure registering capabilities with primary security module.
[   11.873362] ACPI: CPU0 (power states: C1[C1] C3[C3])
[   11.873369] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.873380] ACPI: Invalid PBLK length [0]
[   11.880167] ACPI: Thermal Zone [THRM] (55 C)
[   12.495035] usbcore: registered new interface driver usbfs
[   12.495082] usbcore: registered new interface driver hub
[   12.495425] usbcore: registered new device driver usb
[   12.496848] USB Universal Host Controller Interface driver v3.0
[   12.496937] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[   12.496952] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   12.496958] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   12.497137] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   12.497173] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001cc0
[   12.497367] usb usb1: configuration #1 chosen from 1 choice
[   12.497413] hub 1-0:1.0: USB hub found
[   12.497425] hub 1-0:1.0: 2 ports detected
[   12.599380] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
[   12.599397] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   12.599403] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.599442] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   12.599476] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001ce0
[   12.599626] usb usb2: configuration #1 chosen from 1 choice
[   12.599673] hub 2-0:1.0: USB hub found
[   12.599683] hub 2-0:1.0: 2 ports detected
[   12.650600] SCSI subsystem initialized
[   12.658177] libata version 2.21 loaded.
[   12.703146] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   12.703162] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   12.703169] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.703204] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   12.703234] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002000
[   12.703382] usb usb3: configuration #1 chosen from 1 choice
[   12.703426] hub 3-0:1.0: USB hub found
[   12.703437] hub 3-0:1.0: 2 ports detected
[   12.716417] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   12.807811] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
[   12.807833] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   12.807839] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   12.807903] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[   12.807966] ehci_hcd 0000:00:1d.7: debug port 1
[   12.807976] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   12.807997] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0000000
[   12.812180] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   12.812372] usb usb4: configuration #1 chosen from 1 choice
[   12.812432] hub 4-0:1.0: USB hub found
[   12.812442] hub 4-0:1.0: 6 ports detected
[   12.915193] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   12.915200] 8139cp 0000:02:00.0: Try the "8139too" driver instead.
[   12.915866] ata_piix 0000:00:1f.1: version 2.11
[   12.915885] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   12.915894] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[   12.915945] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   12.916052] scsi0 : ata_piix
[   12.916401] scsi1 : ata_piix
[   12.916587] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012040 irq 14
[   12.916593] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012048 irq 15
[   12.918856] 8139too Fast Ethernet driver 0.9.28
[   13.078812] ata1.00: ATA-6: IC25N080ATMR04-0, MO4OAD0A, max UDMA/100
[   13.078817] ata1.00: 156301488 sectors, multi 16: LBA48 
[   13.094772] ata1.00: configured for UDMA/100
[   13.414061] ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.15, max MWDMA2
[   13.585780] ata2.00: configured for MWDMA2
[   13.585931] scsi 0:0:0:0: Direct-Access     ATA      IC25N080ATMR04-0 MO4O PQ: 0 ANSI: 5
[   13.586546] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+RW GCA-4040N 1.15 PQ: 0 ANSI: 5
[   13.589199] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 19 (level, low) -> IRQ 18
[   13.638996] usb 1-1: new low speed USB device using uhci_hcd and address 2
[   13.639133] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[d2007000-d20077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   13.639405] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 21
[   13.639809] eth0: RealTek RTL8139 at 0xe0856800, 00:c0:9f:33:a8:54, IRQ 21
[   13.639816] eth0:  Identified 8139 chip type 'RTL-8101'
[   13.645391] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   13.645412] sd 0:0:0:0: [sda] Write Protect is off
[   13.645416] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.645470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.645568] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   13.646796] sd 0:0:0:0: [sda] Write Protect is off
[   13.646801] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.646841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.646847]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[   13.742883] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.747527] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   13.747535] Uniform CD-ROM driver Revision: 3.20
[   13.747612] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   13.748554] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.748590] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   13.823915] usb 1-1: configuration #1 chosen from 1 choice
[   13.837605] usbcore: registered new interface driver hiddev
[   13.849977] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input2
[   13.850014] input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
[   13.850038] usbcore: registered new interface driver usbhid
[   13.850044] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   14.197847] Attempting manual resume
[   14.197851] swsusp: Resume From Partition 8:6
[   14.197853] PM: Checking swsusp image.
[   14.198054] PM: Resume from disk failed.
[   14.247977] kjournald starting.  Commit interval 5 seconds
[   14.247996] EXT3-fs: mounted filesystem with ordered data mode.
[   14.907546] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00508b0880020204]
[   24.287538] Linux agpgart interface v0.102 (c) Dave Jones
[   24.301565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   24.304477] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.327273] agpgart: Detected an Intel 865 Chipset.
[   24.332631] agpgart: AGP aperture is 128M @ 0xd8000000
[   24.464617] iTCO_vendor_support: vendor-support=0
[   24.466106] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   24.466213] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
[   24.466277] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.504297] intel_rng: FWH not detected
[   25.151601] Yenta: CardBus bridge found at 0000:02:01.0 [103c:006a]
[   25.151622] Yenta: Using CSCINT to route CSC interrupts to PCI
[   25.151627] Yenta: Routing CardBus interrupts to PCI
[   25.151635] Yenta TI: socket 0000:02:01.0, mfunc 0x00221c02, devctl 0x44
[   25.254579] input: PC Speaker as /class/input/input3
[   25.383039] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   25.383044] Socket status: 30000006
[   25.383047] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[   25.383054] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   25.383057] cs: IO port probe 0x3000-0x3fff: clean.
[   25.383342] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd23fffff
[   25.383345] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[   25.432284] irda_init()
[   25.432310] NET: Registered protocol family 23
[   25.627776] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 16
[   25.627805] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   25.755831] cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
[   25.757636] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   25.758401] cs: IO port probe 0x820-0x8ff: clean.
[   25.759053] cs: IO port probe 0xc00-0xcf7: clean.
[   25.759845] cs: IO port probe 0xa00-0xaff: clean.
[   25.864951] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb1, caps: 0xa04711/0xa
[   25.899555] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   25.902259] parport_pc 00:08: reported by Plug and Play ACPI
[   25.902364] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   25.945326] intel8x0_measure_ac97_clock: measured 54035 usecs
[   25.945331] intel8x0: clocking to 48000
[   25.997721] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[   25.997752] nsc-ircc, chip->init
[   25.997766] nsc-ircc, Found chip at base=0x02e
[   25.997798] nsc-ircc, driver loaded (Dag Brattli)
[   25.997805] nsc_ircc_open(), can't get iobase of 0x2f8
[   25.997834] nsc-ircc, Found chip at base=0x02e
[   25.997861] nsc-ircc, driver loaded (Dag Brattli)
[   25.997867] nsc_ircc_open(), can't get iobase of 0x2f8
[   25.998106] pnp: Device 00:09 disabled.
[   26.576887] lp0: using parport0 (interrupt-driven).
[   26.693383] ndiswrapper version 1.45 loaded (smp=yes)
[   26.813288] ndiswrapper: driver bcmwl5a (Broadcom,12/22/2004, 3.100.46.0) loaded
[   26.813558] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 21 (level, low) -> IRQ 22
[   26.818172] ndiswrapper: using IRQ 22
[   27.247327] wlan0: ethernet device 00:90:4b:4b:7b:99 using NDIS driver: bcmwl5a, version: 0x3642e00, NDIS version: 0x501, vendor: '', 14E4:4320.5.conf
[   27.247368] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   27.247454] usbcore: registered new interface driver ndiswrapper
[   27.250692] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[   27.318196] Adding 1020088k swap on /dev/sda6.  Priority:-1 extents:1 across:1020088k
[   27.860012] EXT3 FS on sda2, internal journal
[   51.368944] synaptics: using relaxed packet validation
[   58.325827] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[   58.325837] ReiserFS: sda7: using ordered data mode
[   58.335203] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   58.335901] ReiserFS: sda7: checking transaction log (sda7)
[   58.400013] ReiserFS: sda7: Using r5 hash to sort names
[   58.627325] kjournald starting.  Commit interval 5 seconds
[   58.627561] EXT3 FS on sda5, internal journal
[   58.627566] EXT3-fs: mounted filesystem with ordered data mode.

jajaX · Le 13/11/2007, à 15:23

ok. perso je vois d'anormal. mais d'autres y trouverons peu être quelque chose...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 11/11/2007, à 08:54

Demarrage Kubuntu en 2 temps

#2 Le 13/11/2007, à 10:03

Re : Demarrage Kubuntu en 2 temps

#3 Le 13/11/2007, à 11:20

Re : Demarrage Kubuntu en 2 temps

#4 Le 13/11/2007, à 13:06

Re : Demarrage Kubuntu en 2 temps

#5 Le 13/11/2007, à 15:23

Re : Demarrage Kubuntu en 2 temps

Pied de page des forums