Pages : 1
#1 Le 19/04/2013, à 12:10
- ExploZe
Problème BOOT / Ping mais pas de ssh
Bonjour,
Suite à un redemarrage simple, impossible de ce connecter au serveur en SSH plus aucun service ne répond mais bien le ping.
Rédemarrage en mode rescue
Voici les infos :
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks for (md1)/boot/grub on this drive.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks for (md1)/boot/grub on this drive.
=> No boot loader is installed in the MBR of /dev/sdc.
=> No boot loader is installed in the MBR of /dev/sdd.
sda1: __________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sda2: __________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sdb2: __________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________________________________
File system: linux_raid_member
Boot sector type: -
Boot sector info:
md3: ___________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
md2: ___________________________________________________________________________
File system: reiserfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
md1: ___________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 4,096 10,242,048 10,237,953 fd Linux raid autodetect
/dev/sda2 10,242,049 152,199,168 141,957,120 fd Linux raid autodetect
/dev/sda3 152,199,169 156,293,120 4,093,952 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 4,096 10,242,048 10,237,953 fd Linux raid autodetect
/dev/sdb2 10,242,049 152,199,168 141,957,120 fd Linux raid autodetect
/dev/sdb3 152,199,169 156,293,120 4,093,952 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 1 2,930,277,167 2,930,277,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdc1 34 2,794,523,437 2,794,523,404 RAID partition (Linux)
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 1 2,930,277,167 2,930,277,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdd1 34 2,794,523,437 2,794,523,404 RAID partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/md1 f503d56b-911d-4c23-97fd-902b820406e8 ext3 /
/dev/md2 f1d40ec1-f238-4512-bd50-4df5e5196d31 reiserfs
/dev/md3 b53326e6-b854-4cb5-9fd6-7c2deed5bb93 ext3
/dev/sda1 f56f1bfb-fba7-6190-a4d2-adc226fd5302 linux_raid_member
/dev/sda2 ebe8ffb5-9296-1007-a4d2-adc226fd5302 linux_raid_member
/dev/sda3 8ff09c78-d8e2-4d71-9a0d-fb3bc41db75e swap
/dev/sdb1 f56f1bfb-fba7-6190-a4d2-adc226fd5302 linux_raid_member
/dev/sdb2 ebe8ffb5-9296-1007-a4d2-adc226fd5302 linux_raid_member
/dev/sdb3 c65b12f9-4dcd-4fcd-8883-934e5f59a749 swap
/dev/sdc1 8f5506cd-524d-36b0-3e5c-4af08c935819 linux_raid_member
/dev/sdd1 8f5506cd-524d-36b0-3e5c-4af08c935819 linux_raid_member
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/md1 / ext3 (rw,relatime,errors=continue,barrier=1,data=writeback)
/dev/md2 /home reiserfs (rw,relatime)
=========================== md1/boot/grub/grub.cfg: ============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
}
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_OVHkernel ###
menuentry "Ubuntu 10.04 LTS, OVH kernel 2.6.34.6-xxxx-grs-ipv6-64" {
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/bzImage-2.6.34.6-xxxx-grs-ipv6-64 root=/dev/md1 ro nomodeset
}
### END /etc/grub.d/06_OVHkernel ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-40-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-40-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-40-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-40-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-40-generic ...'
linux /boot/vmlinuz-3.2.0-40-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-40-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-39-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-39-generic ...'
linux /boot/vmlinuz-3.2.0-39-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-38-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-38-generic ...'
linux /boot/vmlinuz-3.2.0-38-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-36-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-36-generic ...'
linux /boot/vmlinuz-3.2.0-36-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-35-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-35-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-35-generic ...'
linux /boot/vmlinuz-3.2.0-35-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-35-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-34-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-34-generic ...'
linux /boot/vmlinuz-3.2.0-34-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
linux /boot/vmlinuz-3.2.0-32-generic root=/dev/md1 ro nomodeset
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod raid
insmod mdraid09
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/f56f1bfbfba76190a4d2adc226fd5302)'
search --no-floppy --fs-uuid --set=root f503d56b-911d-4c23-97fd-902b820406e8
echo 'Loading Linux 3.2.0-32-generic ...'
linux /boot/vmlinuz-3.2.0-32-generic root=/dev/md1 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
================================ md1/etc/fstab: ================================
--------------------------------------------------------------------------------
# <sys.fichiers><pt de montage><type> <options> <dump> <pass>
/dev/md1 / ext3 errors=remount-ro 0 1
/dev/md2 /home reiserfs defaults 1 2
/dev/sda3 swap swap defaults 0 0
/dev/sdb3 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
dev /dev devtmpfs rw 0 0
/dev/md3 /data ext3 defaults 0 0
tmpfs /home/7enlocation.com/htdocs/static_cache/villes tmpfs default,size=10g 0 0
--------------------------------------------------------------------------------
==================== md1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 2
= boot/initrd.img-3.2.0-32-generic 18
= boot/initrd.img-3.2.0-34-generic 32
= boot/initrd.img-3.2.0-35-generic 24
= boot/initrd.img-3.2.0-36-generic 27
= boot/initrd.img-3.2.0-38-generic 11
= boot/initrd.img-3.2.0-39-generic 40
= boot/initrd.img-3.2.0-40-generic 56
= boot/vmlinuz-3.2.0-32-generic 5
= boot/vmlinuz-3.2.0-34-generic 3
= boot/vmlinuz-3.2.0-35-generic 12
= boot/vmlinuz-3.2.0-36-generic 3
= boot/vmlinuz-3.2.0-38-generic 18
= boot/vmlinuz-3.2.0-39-generic 21
= boot/vmlinuz-3.2.0-40-generic 15
= initrd.img 56
= initrd.img.old 40
= vmlinuz 15
= vmlinuz.old 21
=============================== StdErr Messages: ===============================
/var/lock/lvm: mkdir failed: No such file or directory
File-based locking initialisation failed.
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled inMerci d'avance
Hors ligne
#2 Le 19/04/2013, à 12:25
- Kooothor
Re : Problème BOOT / Ping mais pas de ssh
T'as pas joué avec le firewall avant le reboot ?
Hors ligne
#3 Le 19/04/2013, à 13:12
- ExploZe
Re : Problème BOOT / Ping mais pas de ssh
Non malheureusement, j'aurai pu trouvé sinon je pense ! 
Le problème c'est que j'ai zéro log, j'ai activé les logs au Boot dans /etc/default/bootlogd
Mais le fichier /var/log/boot est toujours vide néant
Aucun message dans /var/log/dmesg non plus
Donc je pense que mes partitions ne sont pas montée ou quelque chose comme ça !
Hors ligne
#4 Le 19/04/2013, à 13:13
- ExploZe
Re : Problème BOOT / Ping mais pas de ssh
D'autre info
Linux version 3.2.2-xxxx-std-ipv6-64 (root@kernel-64.ovh.net) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jan 27 14:06:07 UTC 2012Sinon j'ai un bon nombre de packet de kernel :
dpkg -l | grep -Ei "linux-headers|linux-image"
rc linux-image-2.6.32-23-generic 2.6.32-23.37 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-27-generic 2.6.32-27.49 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-28-generic 2.6.32-28.55 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-29-generic 2.6.32-29.58 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-32-generic 2.6.32-32.62 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-33-generic 2.6.32-33.72 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-34-generic 2.6.32-34.77 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-35-generic 2.6.32-35.78 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-37-generic 2.6.32-37.81 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-38-generic 2.6.32-38.83 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-39-generic 2.6.32-39.86 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-40-generic 2.6.32-40.87 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-41-generic 2.6.32-41.94 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-42-generic 2.6.32-42.96 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-43-generic 2.6.32-43.97 Linux kernel image for version 2.6.32 on x86/x86_64
rc linux-image-2.6.32-44-generic 2.6.32-44.98 Linux kernel image for version 2.6.32 on x86/x86_64
ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-3.2.0-34-generic 3.2.0-34.53 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-3.2.0-35-generic 3.2.0-35.55 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-3.2.0-36-generic 3.2.0-36.57 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-3.2.0-38-generic 3.2.0-38.61 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-3.2.0-39-generic 3.2.0-39.62 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-3.2.0-40-generic 3.2.0-40.64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP
ii linux-image-generic 3.2.0.40.48 Generic Linux kernel imageDernière modification par ExploZe (Le 19/04/2013, à 13:16)
Hors ligne
#5 Le 19/04/2013, à 14:59
- Kooothor
Re : Problème BOOT / Ping mais pas de ssh
t'as de l'espace disque sur ta partition /boot ?
Hors ligne
#6 Le 19/04/2013, à 15:38
- ExploZe
Re : Problème BOOT / Ping mais pas de ssh
Oui, j'ai 3.6Go de libre sur 5Go
Mais c'etait pas une mauvaise idée
Hors ligne
#7 Le 20/04/2013, à 11:32
- ExploZe
Re : Problème BOOT / Ping mais pas de ssh
Bon finalement j'ai reussi à redemarrer par un miracle, j'ai stopper tous les services au démarrage avec update-rc.d, supprimer les interfaces failover (8) et magie ça refonctionne ... pk comment je sais pas vu que les services ce lancent correctement et j'ai pu remettre mes ips failover ...
Étrange
Hors ligne
Pages : 1