#26 Le 28/04/2013, à 11:16
- F50
Re : demarrage en 25 sec
Salut tiramiseb,
Heu désolé ma souris à recopié le même lien en cliquant sur la molette. 
J'ai remis le bon.
#27 Le 28/04/2013, à 11:19
- tiramiseb
Re : demarrage en 25 sec
faucon50, le problème que tu cites est un problème lié à la swap.
Mais ce trou ne peut pas être lié à la swap chez moi, car je n'ai pas de swap...
Malheureusement, toujours pas d'explication rationnelle 
Sébastien Maccagnoni - https://www.maccagnoni.eu - https://www.domotego.com
Hors ligne
#28 Le 28/04/2013, à 11:25
- F50
Re : demarrage en 25 sec
Je parlais pour david69. Pour toi c'est probablement d'après ce que je comprends, le wlan qui cherche la connexion. Il est configuré en dhpc ou ip fixe? Car chez moi eth0 est en ip fixe mais si je le met en dhpc il cherche aussi et ça fait un trou.
#29 Le 28/04/2013, à 11:28
- tiramiseb
Re : demarrage en 25 sec
faucon50 a écrit :
Je parlais pour david69. Pour toi c'est probablement d'après ce que je comprends, le wlan qui cherche la connexion. Il est configuré en dhpc ou ip fixe? Car chez moi eth0 est en ip fixe mais si je le met en dhpc il cherche aussi et ça fait un trou.
Aucun rapport avec le DHCP vu que ce qu'on voit l'interface wifi se connecter au réseau wifi : le DHCP n'intervient qu'après.
Tu ne trouves pas ça bizarre que tout le monde a un trou comme ça et que ce serait une raison différente chez chacun ?
Cela ne me semblerait pas rationnel.
Sébastien Maccagnoni - https://www.maccagnoni.eu - https://www.domotego.com
Hors ligne
#30 Le 28/04/2013, à 11:35
- tiramiseb
Re : demarrage en 25 sec
Ce qui me dérange un peu aussi c'est que, quand je regarde le fichier /var/log/dmesg, il s'arrête largement avant ce trou (à 3 secondes et quelques pour ma part), ce qui semblerait signifier que le véritable boot en lui-même dure 3 secondes chez moi, le reste étant du lancement de trucs ultérieurs...
Je suis en train de regarder comment utiliser bootchart, histoire de mieux voir tout ça...
Sébastien Maccagnoni - https://www.maccagnoni.eu - https://www.domotego.com
Hors ligne
#31 Le 28/04/2013, à 12:01
- F50
Re : demarrage en 25 sec
tiramiseb a écrit :
Tu ne trouves pas ça bizarre que tout le monde a un trou comme ça et que ce serait une raison différente chez chacun ?
Cela ne me semblerait pas rationnel.
Pas du tout, d'ailleurs, regarde les logs et "l'après" trou n'indique pas la même raison chez tous.
tiramiseb a écrit :
Ce qui me dérange un peu aussi c'est que, quand je regarde le fichier /var/log/dmesg, il s'arrête largement avant ce trou (à 3 secondes et quelques pour ma part), ce qui semblerait signifier que le véritable boot
dmseg n'indique pas tout du boot, la différence est normale.
Je continu à penser que c'est ta config wifi... et bien sûr que dhpc interviens si ce n'est pas une ip fixe, c'est lui qui recherche l'adresse dynamiquement justement.
Perso je suis en "pseudo" eth0 ip fixe et je fais starter le networking en // au boot et je n'ai aucun trou. La preuve:
52 kernel: imklog 5.8.6, log source = /proc/kmsg started.
04-28 08:52 rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="832" x-info="http://www.rsyslog.com"] start
04-28 08:52 rsyslogd: rsyslogd's groupid changed to 103
04-28 08:52 rsyslogd: rsyslogd's userid changed to 101
04-28 08:52 rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
04-28 08:52 kernel: [ 0.000000] Initializing cgroup subsys cpuset
04-28 08:52 kernel: [ 0.000000] Initializing cgroup subsys cpu
04-28 08:52 kernel: [ 0.000000] Linux version 3.2.0-40-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #64-Ubuntu SMP Mon Mar 25 21:22:10 UTC 2013 (Ubuntu 3.2.0-40.64-generic 3.2.40)
04-28 08:52 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-generic root=UUID=15b357e1-fc18-4c73-a061-af704c2357f5 ro iommu=noaperture noresume i8042.noaux i8042.nokbd
04-28 08:52 kernel: [ 0.000000] KERNEL supported cpus:
04-28 08:52 kernel: [ 0.000000] Intel GenuineIntel
04-28 08:52 kernel: [ 0.000000] AMD AuthenticAMD
04-28 08:52 kernel: [ 0.000000] Centaur CentaurHauls
04-28 08:52 kernel: [ 0.000000] BIOS-provided physical RAM map:
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfc91000 (usable)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 00000000cfcf0000 - 00000000cfcf3000 (ACPI NVS)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 00000000cfcf3000 - 00000000cfd00000 (ACPI data)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
04-28 08:52 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
04-28 08:52 kernel: [ 0.000000] NX (Execute Disable) protection: active
04-28 08:52 kernel: [ 0.000000] SMBIOS 2.4 present.
04-28 08:52 kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA770-UD3/GA-MA770-UD3, BIOS FKb 07/08/2010
04-28 08:52 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
04-28 08:52 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
04-28 08:52 kernel: [ 0.000000] No AGP bridge found
04-28 08:52 kernel: [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
04-28 08:52 kernel: [ 0.000000] MTRR default type: uncachable
04-28 08:52 kernel: [ 0.000000] MTRR fixed ranges enabled:
04-28 08:52 kernel: [ 0.000000] 00000-9FFFF write-back
04-28 08:52 kernel: [ 0.000000] A0000-BFFFF uncachable
04-28 08:52 kernel: [ 0.000000] C0000-C7FFF write-protect
04-28 08:52 kernel: [ 0.000000] C8000-FFFFF uncachable
04-28 08:52 kernel: [ 0.000000] MTRR variable ranges enabled:
04-28 08:52 kernel: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
04-28 08:52 kernel: [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
04-28 08:52 kernel: [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
04-28 08:52 kernel: [ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable
04-28 08:52 kernel: [ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable
04-28 08:52 kernel: [ 0.000000] 5 base 000100000000 mask FFFFE0000000 write-back
04-28 08:52 kernel: [ 0.000000] 6 base 000120000000 mask FFFFF0000000 write-back
04-28 08:52 kernel: [ 0.000000] 7 disabled
04-28 08:52 kernel: [ 0.000000] TOM2: 0000000130000000 aka 4864M
04-28 08:52 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
04-28 08:52 kernel: [ 0.000000] original variable MTRRs
04-28 08:52 kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
04-28 08:52 kernel: [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
04-28 08:52 kernel: [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
04-28 08:52 kernel: [ 0.000000] reg 3, base: 3325MB, range: 1MB, type UC
04-28 08:52 kernel: [ 0.000000] reg 4, base: 3326MB, range: 2MB, type UC
04-28 08:52 kernel: [ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
04-28 08:52 kernel: [ 0.000000] reg 6, base: 4608MB, range: 256MB, type WB
04-28 08:52 kernel: [ 0.000000] total RAM covered: 3325M
04-28 08:52 kernel: [ 0.000000] Found optimal setting for mtrr clean up
04-28 08:52 kernel: [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
04-28 08:52 kernel: [ 0.000000] New variable MTRRs
04-28 08:52 kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
04-28 08:52 kernel: [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
04-28 08:52 kernel: [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
04-28 08:52 kernel: [ 0.000000] reg 3, base: 3325MB, range: 1MB, type UC
04-28 08:52 kernel: [ 0.000000] reg 4, base: 3326MB, range: 2MB, type UC
04-28 08:52 kernel: [ 0.000000] e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved)
04-28 08:52 kernel: [ 0.000000] last_pfn = 0xcfc91 max_arch_pfn = 0x400000000
04-28 08:52 kernel: [ 0.000000] found SMP MP-table at [ffff8800000f53d0] f53d0
04-28 08:52 kernel: [ 0.000000] initial memory mapped : 0 - 20000000
04-28 08:52 kernel: [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 20480
04-28 08:52 kernel: [ 0.000000] Using GB pages for direct mapping
04-28 08:52 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfc91000
04-28 08:52 kernel: [ 0.000000] 0000000000 - 00c0000000 page 1G
04-28 08:52 kernel: [ 0.000000] 00c0000000 - 00cfc00000 page 2M
04-28 08:52 kernel: [ 0.000000] 00cfc00000 - 00cfc91000 page 4k
04-28 08:52 kernel: [ 0.000000] kernel direct mapping tables up to cfc91000 @ 1fffd000-20000000
04-28 08:52 kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
04-28 08:52 kernel: [ 0.000000] 0100000000 - 0130000000 page 2M
04-28 08:52 kernel: [ 0.000000] kernel direct mapping tables up to 130000000 @ cfc8f000-cfc91000
04-28 08:52 kernel: [ 0.000000] RAMDISK: 36536000 - 37293000
04-28 08:52 kernel: [ 0.000000] ACPI: RSDP 00000000000f6e00 00014 (v00 GBT )
04-28 08:52 kernel: [ 0.000000] ACPI: RSDT 00000000cfcf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
04-28 08:52 kernel: [ 0.000000] ACPI: FACP 00000000cfcf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
04-28 08:52 kernel: [ 0.000000] ACPI: DSDT 00000000cfcf30c0 07472 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
04-28 08:52 kernel: [ 0.000000] ACPI: FACS 00000000cfcf0000 00040
04-28 08:52 kernel: [ 0.000000] ACPI: SSDT 00000000cfcfa600 012F6 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
04-28 08:52 kernel: [ 0.000000] ACPI: HPET 00000000cfcfb900 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
04-28 08:52 kernel: [ 0.000000] ACPI: MCFG 00000000cfcfb940 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
04-28 08:52 kernel: [ 0.000000] ACPI: APIC 00000000cfcfa540 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
04-28 08:52 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
04-28 08:52 kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
04-28 08:52 kernel: [ 0.000000] No NUMA configuration found
04-28 08:52 kernel: [ 0.000000] Faking a node at 0000000000000000-0000000130000000
04-28 08:52 kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
04-28 08:52 kernel: [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
04-28 08:52 kernel: [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
04-28 08:52 kernel: [ 0.000000] Zone PFN ranges:
04-28 08:52 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
04-28 08:52 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
04-28 08:52 kernel: [ 0.000000] Normal 0x00100000 -> 0x00130000
04-28 08:52 kernel: [ 0.000000] Movable zone start PFN for each node
04-28 08:52 kernel: [ 0.000000] early_node_map[3] active PFN ranges
04-28 08:52 kernel: [ 0.000000] 0: 0x00000010 -> 0x00000098
04-28 08:52 kernel: [ 0.000000] 0: 0x00000100 -> 0x000cfc91
04-28 08:52 kernel: [ 0.000000] 0: 0x00100000 -> 0x00130000
04-28 08:52 kernel: [ 0.000000] On node 0 totalpages: 1047577
04-28 08:52 kernel: [ 0.000000] DMA zone: 64 pages used for memmap
04-28 08:52 kernel: [ 0.000000] DMA zone: 5 pages reserved
04-28 08:52 kernel: [ 0.000000] DMA zone: 3907 pages, LIFO batch:0
04-28 08:52 kernel: [ 0.000000] DMA32 zone: 16320 pages used for memmap
04-28 08:52 kernel: [ 0.000000] DMA32 zone: 830673 pages, LIFO batch:31
04-28 08:52 kernel: [ 0.000000] Normal zone: 3072 pages used for memmap
04-28 08:52 kernel: [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
04-28 08:52 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
04-28 08:52 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
04-28 08:52 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
04-28 08:52 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
04-28 08:52 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
04-28 08:52 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
04-28 08:52 kernel: [ 0.000000] ACPI: IRQ0 used by override.
04-28 08:52 kernel: [ 0.000000] ACPI: IRQ2 used by override.
04-28 08:52 kernel: [ 0.000000] ACPI: IRQ9 used by override.
04-28 08:52 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
04-28 08:52 kernel: [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
04-28 08:52 kernel: [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
04-28 08:52 kernel: [ 0.000000] nr_irqs_gsi: 40
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfc91000 - 00000000cfcf0000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf3000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfcf3000 - 00000000cfd00000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
04-28 08:52 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
04-28 08:52 kernel: [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
04-28 08:52 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
04-28 08:52 kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
04-28 08:52 kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83136 r8192 d23360 u262144
04-28 08:52 kernel: [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
04-28 08:52 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
04-28 08:52 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028116
04-28 08:52 kernel: [ 0.000000] Policy zone: Normal
04-28 08:52 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-generic root=UUID=15b357e1-fc18-4c73-a061-af704c2357f5 ro iommu=noaperture noresume i8042.noaux i8042.nokbd
04-28 08:52 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
04-28 08:52 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
04-28 08:52 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
04-28 08:52 kernel: [ 0.000000] Memory: 4028312k/4980736k available (6574k kernel code, 790428k absent, 161996k reserved, 6629k data, 920k init)
04-28 08:52 kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
04-28 08:52 kernel: [ 0.000000] Hierarchical RCU implementation.
04-28 08:52 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
04-28 08:52 kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
04-28 08:52 kernel: [ 0.000000] spurious 8259A interrupt: IRQ7.
04-28 08:52 kernel: [ 0.000000] Console: colour dummy device 80x25
04-28 08:52 kernel: [ 0.000000] console [tty0] enabled
04-28 08:52 kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
04-28 08:52 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
04-28 08:52 kernel: [ 0.000000] hpet clockevent registered
04-28 08:52 kernel: [ 0.000000] Fast TSC calibration using PIT
04-28 08:52 kernel: [ 0.000000] Detected 3214.612 MHz processor.
04-28 08:52 kernel: [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.22 BogoMIPS (lpj=12858448)
04-28 08:52 kernel: [ 0.008010] pid_max: default: 32768 minimum: 301
04-28 08:52 kernel: [ 0.008030] Security Framework initialized
04-28 08:52 kernel: [ 0.008042] AppArmor: AppArmor initialized
04-28 08:52 kernel: [ 0.008044] Yama: becoming mindful.
04-28 08:52 kernel: [ 0.008273] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
04-28 08:52 kernel: [ 0.009470] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
04-28 08:52 kernel: [ 0.010034] Mount-cache hash table entries: 256
04-28 08:52 kernel: [ 0.010143] Initializing cgroup subsys cpuacct
04-28 08:52 kernel: [ 0.010148] Initializing cgroup subsys memory
04-28 08:52 kernel: [ 0.010157] Initializing cgroup subsys devices
04-28 08:52 kernel: [ 0.010160] Initializing cgroup subsys freezer
04-28 08:52 kernel: [ 0.010162] Initializing cgroup subsys blkio
04-28 08:52 kernel: [ 0.010168] Initializing cgroup subsys perf_event
04-28 08:52 kernel: [ 0.010191] tseg: 00cfe00000
04-28 08:52 kernel: [ 0.010193] CPU: Physical Processor ID: 0
04-28 08:52 kernel: [ 0.010195] CPU: Processor Core ID: 0
04-28 08:52 kernel: [ 0.010197] mce: CPU supports 6 MCE banks
04-28 08:52 kernel: [ 0.011283] ACPI: Core revision 20110623
04-28 08:52 kernel: [ 0.016032] ftrace: allocating 26565 entries in 105 pages
04-28 08:52 kernel: [ 0.024213] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
04-28 08:52 kernel: [ 0.063912] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
04-28 08:52 kernel: [ 0.064003] Performance Events: AMD PMU driver.
04-28 08:52 kernel: [ 0.064003] ... version: 0
04-28 08:52 kernel: [ 0.064003] ... bit width: 48
04-28 08:52 kernel: [ 0.064003] ... generic registers: 4
04-28 08:52 kernel: [ 0.064003] ... value mask: 0000ffffffffffff
04-28 08:52 kernel: [ 0.064003] ... max period: 00007fffffffffff
04-28 08:52 kernel: [ 0.064003] ... fixed-purpose events: 0
04-28 08:52 kernel: [ 0.064003] ... event mask: 000000000000000f
04-28 08:52 kernel: [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
04-28 08:52 kernel: [ 0.064003] Booting Node 0, Processors #1
04-28 08:52 kernel: [ 0.064003] smpboot cpu 1: start_ip = 93000
04-28 08:52 kernel: [ 0.152024] NMI watchdog enabled, takes one hw-pmu counter.
04-28 08:52 kernel: [ 0.152082] #2
04-28 08:52 kernel: [ 0.152083] smpboot cpu 2: start_ip = 93000
04-28 08:52 kernel: [ 0.244028] NMI watchdog enabled, takes one hw-pmu counter.
04-28 08:52 kernel: [ 0.244079] #3
04-28 08:52 kernel: [ 0.244081] smpboot cpu 3: start_ip = 93000
04-28 08:52 kernel: [ 0.336033] NMI watchdog enabled, takes one hw-pmu counter.
04-28 08:52 kernel: [ 0.336092] #4
04-28 08:52 kernel: [ 0.336093] smpboot cpu 4: start_ip = 93000
04-28 08:52 kernel: [ 0.428039] NMI watchdog enabled, takes one hw-pmu counter.
04-28 08:52 kernel: [ 0.428111] #5
04-28 08:52 kernel: [ 0.428112] smpboot cpu 5: start_ip = 93000
04-28 08:52 kernel: [ 0.520062] NMI watchdog enabled, takes one hw-pmu counter.
04-28 08:52 kernel: [ 0.520104] Brought up 6 CPUs
04-28 08:52 kernel: [ 0.520108] Total of 6 processors activated (38574.70 BogoMIPS).
04-28 08:52 kernel: [ 0.524200] devtmpfs: initialized
04-28 08:52 kernel: [ 0.528278] EVM: security.selinux
04-28 08:52 kernel: [ 0.528280] EVM: security.SMACK64
04-28 08:52 kernel: [ 0.528282] EVM: security.capability
04-28 08:52 kernel: [ 0.528330] PM: Registering ACPI NVS region at cfcf0000 (12288 bytes)
04-28 08:52 kernel: [ 0.528585] print_constraints: dummy:
04-28 08:52 kernel: [ 0.528611] RTC time: 6:51:59, date: 04/28/13
04-28 08:52 kernel: [ 0.528639] NET: Registered protocol family 16
04-28 08:52 kernel: [ 0.528730] node 0 link 0: io port [c000, ffff]
04-28 08:52 kernel: [ 0.528740] TOM: 00000000d0000000 aka 3328M
04-28 08:52 kernel: [ 0.528743] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
04-28 08:52 kernel: [ 0.528745] node 0 link 0: mmio [a0000, bffff]
04-28 08:52 kernel: [ 0.528747] node 0 link 0: mmio [d0000000, dfffffff]
04-28 08:52 kernel: [ 0.528749] node 0 link 0: mmio [f0000000, fe02ffff]
04-28 08:52 kernel: [ 0.528751] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
04-28 08:52 kernel: [ 0.528753] TOM2: 0000000130000000 aka 4864M
04-28 08:52 kernel: [ 0.528756] bus: [00, 03] on node 0 link 0
04-28 08:52 kernel: [ 0.528757] bus: 00 index 0 [io 0x0000-0xffff]
04-28 08:52 kernel: [ 0.528758] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
04-28 08:52 kernel: [ 0.528760] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
04-28 08:52 kernel: [ 0.528761] bus: 00 index 3 [mem 0xe0400000-0xffffffff]
04-28 08:52 kernel: [ 0.528762] bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
04-28 08:52 kernel: [ 0.528763] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
04-28 08:52 kernel: [ 0.528772] Extended Config Space enabled on 1 nodes
04-28 08:52 kernel: [ 0.528834] ACPI: bus type pci registered
04-28 08:52 kernel: [ 0.528696] Trying to unpack rootfs image as initramfs...
04-28 08:52 kernel: [ 0.528883] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
04-28 08:52 kernel: [ 0.528889] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
04-28 08:52 kernel: [ 0.543987] PCI: Using configuration type 1 for base access
04-28 08:52 kernel: [ 0.544704] bio: create slab <bio-0> at 0
04-28 08:52 kernel: [ 0.544704] ACPI: Added _OSI(Module Device)
04-28 08:52 kernel: [ 0.544704] ACPI: Added _OSI(Processor Device)
04-28 08:52 kernel: [ 0.544704] ACPI: Added _OSI(3.0 _SCP Extensions)
04-28 08:52 kernel: [ 0.544704] ACPI: Added _OSI(Processor Aggregator Device)
04-28 08:52 kernel: [ 0.544704] ACPI: EC: Look up EC in DSDT
04-28 08:52 kernel: [ 0.548239] ACPI: Interpreter enabled
04-28 08:52 kernel: [ 0.548249] ACPI: (supports S0 S3 S4 S5)
04-28 08:52 kernel: [ 0.548266] ACPI: Using IOAPIC for interrupt routing
04-28 08:52 kernel: [ 0.704277] Freeing initrd memory: 13684k freed
04-28 08:52 kernel: [ 0.729463] ACPI: No dock devices found.
04-28 08:52 kernel: [ 0.729469] HEST: Table not found.
04-28 08:52 kernel: [ 0.729473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
04-28 08:52 kernel: [ 0.729509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
04-28 08:52 kernel: [ 0.729578] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
04-28 08:52 kernel: [ 0.729581] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
04-28 08:52 kernel: [ 0.729584] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
04-28 08:52 kernel: [ 0.729587] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
04-28 08:52 kernel: [ 0.729590] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
04-28 08:52 kernel: [ 0.729602] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
04-28 08:52 kernel: [ 0.729612] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
04-28 08:52 kernel: [ 0.729643] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
04-28 08:52 kernel: [ 0.729670] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
04-28 08:52 kernel: [ 0.729672] pci 0000:00:02.0: PME# disabled
04-28 08:52 kernel: [ 0.729690] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
04-28 08:52 kernel: [ 0.729716] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
04-28 08:52 kernel: [ 0.729718] pci 0000:00:0a.0: PME# disabled
04-28 08:52 kernel: [ 0.729741] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
04-28 08:52 kernel: [ 0.729759] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
04-28 08:52 kernel: [ 0.729767] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
04-28 08:52 kernel: [ 0.729776] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
04-28 08:52 kernel: [ 0.729785] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
04-28 08:52 kernel: [ 0.729793] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
04-28 08:52 kernel: [ 0.729802] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
04-28 08:52 kernel: [ 0.729855] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.729867] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
04-28 08:52 kernel: [ 0.729927] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.729939] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
04-28 08:52 kernel: [ 0.730004] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.730021] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
04-28 08:52 kernel: [ 0.730098] pci 0000:00:12.2: supports D1 D2
04-28 08:52 kernel: [ 0.730099] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
04-28 08:52 kernel: [ 0.730103] pci 0000:00:12.2: PME# disabled
04-28 08:52 kernel: [ 0.730123] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.730135] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
04-28 08:52 kernel: [ 0.730194] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.730206] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
04-28 08:52 kernel: [ 0.730271] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.730289] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
04-28 08:52 kernel: [ 0.730365] pci 0000:00:13.2: supports D1 D2
04-28 08:52 kernel: [ 0.730367] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
04-28 08:52 kernel: [ 0.730370] pci 0000:00:13.2: PME# disabled
04-28 08:52 kernel: [ 0.730392] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
04-28 08:52 kernel: [ 0.730484] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
04-28 08:52 kernel: [ 0.730499] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
04-28 08:52 kernel: [ 0.730507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
04-28 08:52 kernel: [ 0.730516] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
04-28 08:52 kernel: [ 0.730524] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
04-28 08:52 kernel: [ 0.730533] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
04-28 08:52 kernel: [ 0.730584] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
04-28 08:52 kernel: [ 0.730655] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
04-28 08:52 kernel: [ 0.730693] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
04-28 08:52 kernel: [ 0.730705] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
04-28 08:52 kernel: [ 0.730768] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
04-28 08:52 kernel: [ 0.730780] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
04-28 08:52 kernel: [ 0.730790] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
04-28 08:52 kernel: [ 0.730799] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
04-28 08:52 kernel: [ 0.730811] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
04-28 08:52 kernel: [ 0.730851] pci 0000:01:00.0: [1002:683f] type 0 class 0x000300
04-28 08:52 kernel: [ 0.730861] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
04-28 08:52 kernel: [ 0.730868] pci 0000:01:00.0: reg 18: [mem 0xfde80000-0xfdebffff 64bit]
04-28 08:52 kernel: [ 0.730874] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
04-28 08:52 kernel: [ 0.730883] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
04-28 08:52 kernel: [ 0.730910] pci 0000:01:00.0: supports D1 D2
04-28 08:52 kernel: [ 0.730912] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
04-28 08:52 kernel: [ 0.730914] pci 0000:01:00.0: PME# disabled
04-28 08:52 kernel: [ 0.730932] pci 0000:01:00.1: [1002:aab0] type 0 class 0x000403
04-28 08:52 kernel: [ 0.730941] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
04-28 08:52 kernel: [ 0.730987] pci 0000:01:00.1: supports D1 D2
04-28 08:52 kernel: [ 0.736062] pci 0000:00:02.0: PCI bridge to [bus 01-01]
04-28 08:52 kernel: [ 0.736069] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
04-28 08:52 kernel: [ 0.736072] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
04-28 08:52 kernel: [ 0.736075] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
04-28 08:52 kernel: [ 0.736114] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
04-28 08:52 kernel: [ 0.736135] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
04-28 08:52 kernel: [ 0.736154] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
04-28 08:52 kernel: [ 0.736166] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
04-28 08:52 kernel: [ 0.736177] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
04-28 08:52 kernel: [ 0.736223] pci 0000:02:00.0: supports D1 D2
04-28 08:52 kernel: [ 0.736224] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
04-28 08:52 kernel: [ 0.736228] pci 0000:02:00.0: PME# disabled
04-28 08:52 kernel: [ 0.744064] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
04-28 08:52 kernel: [ 0.744071] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
04-28 08:52 kernel: [ 0.744073] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
04-28 08:52 kernel: [ 0.744076] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
04-28 08:52 kernel: [ 0.744115] pci 0000:03:06.0: [10ee:3fc5] type 0 class 0x000401
04-28 08:52 kernel: [ 0.744136] pci 0000:03:06.0: reg 10: [mem 0xfdde0000-0xfddeffff]
04-28 08:52 kernel: [ 0.744248] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
04-28 08:52 kernel: [ 0.744253] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
04-28 08:52 kernel: [ 0.744257] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
04-28 08:52 kernel: [ 0.744260] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
04-28 08:52 kernel: [ 0.744262] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
04-28 08:52 kernel: [ 0.744264] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
04-28 08:52 kernel: [ 0.744266] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
04-28 08:52 kernel: [ 0.744268] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
04-28 08:52 kernel: [ 0.744269] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
04-28 08:52 kernel: [ 0.744281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
04-28 08:52 kernel: [ 0.744428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
04-28 08:52 kernel: [ 0.744465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
04-28 08:52 kernel: [ 0.744491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
04-28 08:52 kernel: [ 0.744510] pci0000:00: Requesting ACPI _OSC control (0x1d)
04-28 08:52 kernel: [ 0.744514] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
04-28 08:52 kernel: [ 0.744517] ACPI _OSC control for PCIe not granted, disabling ASPM
04-28 08:52 kernel: [ 0.752346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752378] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752407] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752463] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752490] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752518] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752553] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
04-28 08:52 kernel: [ 0.752629] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
04-28 08:52 kernel: [ 0.752629] vgaarb: loaded
04-28 08:52 kernel: [ 0.752629] vgaarb: bridge control possible 0000:01:00.0
04-28 08:52 kernel: [ 0.752629] i2c-core: driver [aat2870] using legacy suspend method
04-28 08:52 kernel: [ 0.752629] i2c-core: driver [aat2870] using legacy resume method
04-28 08:52 kernel: [ 0.752629] SCSI subsystem initialized
04-28 08:52 kernel: [ 0.752629] libata version 3.00 loaded.
04-28 08:52 kernel: [ 0.752629] usbcore: registered new interface driver usbfs
04-28 08:52 kernel: [ 0.752629] usbcore: registered new interface driver hub
04-28 08:52 kernel: [ 0.752629] usbcore: registered new device driver usb
04-28 08:52 kernel: [ 0.752629] PCI: Using ACPI for IRQ routing
04-28 08:52 kernel: [ 0.761247] PCI: pci_cache_line_size set to 64 bytes
04-28 08:52 kernel: [ 0.761252] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
04-28 08:52 kernel: [ 0.761308] reserve RAM buffer: 0000000000098400 - 000000000009ffff
04-28 08:52 kernel: [ 0.761309] reserve RAM buffer: 00000000cfc91000 - 00000000cfffffff
04-28 08:52 kernel: [ 0.761376] NetLabel: Initializing
04-28 08:52 kernel: [ 0.761378] NetLabel: domain hash size = 128
04-28 08:52 kernel: [ 0.761380] NetLabel: protocols = UNLABELED CIPSOv4
04-28 08:52 kernel: [ 0.761391] NetLabel: unlabeled traffic allowed by default
04-28 08:52 kernel: [ 0.761431] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
04-28 08:52 kernel: [ 0.761431] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
04-28 08:52 kernel: [ 0.762098] Switching to clocksource hpet
04-28 08:52 kernel: [ 0.764457] AppArmor: AppArmor Filesystem Enabled
04-28 08:52 kernel: [ 0.764476] pnp: PnP ACPI init
04-28 08:52 kernel: [ 0.764487] ACPI: bus type pnp registered
04-28 08:52 kernel: [ 0.764550] pnp 00:00: [bus 00-ff]
04-28 08:52 kernel: [ 0.764552] pnp 00:00: [io 0x0cf8-0x0cff]
04-28 08:52 kernel: [ 0.764554] pnp 00:00: [io 0x0000-0x0cf7 window]
04-28 08:52 kernel: [ 0.764555] pnp 00:00: [io 0x0d00-0xffff window]
04-28 08:52 kernel: [ 0.764557] pnp 00:00: [mem 0x000a0000-0x000bffff window]
04-28 08:52 kernel: [ 0.764558] pnp 00:00: [mem 0x000c0000-0x000dffff window]
04-28 08:52 kernel: [ 0.764560] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
04-28 08:52 kernel: [ 0.764589] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
04-28 08:52 kernel: [ 0.764596] pnp 00:01: [io 0x0010-0x001f]
04-28 08:52 kernel: [ 0.764597] pnp 00:01: [io 0x0022-0x003f]
04-28 08:52 kernel: [ 0.764598] pnp 00:01: [io 0x0044-0x005f]
04-28 08:52 kernel: [ 0.764600] pnp 00:01: [io 0x0062-0x0063]
04-28 08:52 kernel: [ 0.764601] pnp 00:01: [io 0x0065-0x006f]
04-28 08:52 kernel: [ 0.764602] pnp 00:01: [io 0x0074-0x007f]
04-28 08:52 kernel: [ 0.764603] pnp 00:01: [io 0x0091-0x0093]
04-28 08:52 kernel: [ 0.764604] pnp 00:01: [io 0x00a2-0x00bf]
04-28 08:52 kernel: [ 0.764606] pnp 00:01: [io 0x00e0-0x00ef]
04-28 08:52 kernel: [ 0.764607] pnp 00:01: [io 0x04d0-0x04d1]
04-28 08:52 kernel: [ 0.764608] pnp 00:01: [io 0x0220-0x0225]
04-28 08:52 kernel: [ 0.764609] pnp 00:01: [io 0x0290-0x0294]
04-28 08:52 kernel: [ 0.764643] system 00:01: [io 0x04d0-0x04d1] has been reserved
04-28 08:52 kernel: [ 0.764646] system 00:01: [io 0x0220-0x0225] has been reserved
04-28 08:52 kernel: [ 0.764649] system 00:01: [io 0x0290-0x0294] has been reserved
04-28 08:52 kernel: [ 0.764652] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
04-28 08:52 kernel: [ 0.765284] pnp 00:02: [io 0x4100-0x411f]
04-28 08:52 kernel: [ 0.765287] pnp 00:02: [io 0x0228-0x022f]
04-28 08:52 kernel: [ 0.765288] pnp 00:02: [io 0x040b]
04-28 08:52 kernel: [ 0.765289] pnp 00:02: [io 0x04d6]
04-28 08:52 kernel: [ 0.765291] pnp 00:02: [io 0x0c00-0x0c01]
04-28 08:52 kernel: [ 0.765292] pnp 00:02: [io 0x0c14]
04-28 08:52 kernel: [ 0.765293] pnp 00:02: [io 0x0c50-0x0c52]
04-28 08:52 kernel: [ 0.765294] pnp 00:02: [io 0x0c6c-0x0c6d]
04-28 08:52 kernel: [ 0.765295] pnp 00:02: [io 0x0c6f]
04-28 08:52 kernel: [ 0.765296] pnp 00:02: [io 0x0cd0-0x0cd1]
04-28 08:52 kernel: [ 0.765298] pnp 00:02: [io 0x0cd2-0x0cd3]
04-28 08:52 kernel: [ 0.765299] pnp 00:02: [io 0x0cd4-0x0cdf]
04-28 08:52 kernel: [ 0.765300] pnp 00:02: [io 0x4000-0x40fe]
04-28 08:52 kernel: [ 0.765301] pnp 00:02: [io 0x4210-0x4217]
04-28 08:52 kernel: [ 0.765302] pnp 00:02: [io 0x0b00-0x0b0f]
04-28 08:52 kernel: [ 0.765303] pnp 00:02: [io 0x0b10-0x0b1f]
04-28 08:52 kernel: [ 0.765305] pnp 00:02: [io 0x0b20-0x0b3f]
04-28 08:52 kernel: [ 0.765306] pnp 00:02: [mem 0x00000000-0x00000fff window]
04-28 08:52 kernel: [ 0.765308] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
04-28 08:52 kernel: [ 0.765313] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.765341] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
04-28 08:52 kernel: [ 0.765348] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
04-28 08:52 kernel: [ 0.765391] system 00:02: [io 0x4100-0x411f] has been reserved
04-28 08:52 kernel: [ 0.765395] system 00:02: [io 0x0228-0x022f] has been reserved
04-28 08:52 kernel: [ 0.765398] system 00:02: [io 0x040b] has been reserved
04-28 08:52 kernel: [ 0.765401] system 00:02: [io 0x04d6] has been reserved
04-28 08:52 kernel: [ 0.765403] system 00:02: [io 0x0c00-0x0c01] has been reserved
04-28 08:52 kernel: [ 0.765406] system 00:02: [io 0x0c14] has been reserved
04-28 08:52 kernel: [ 0.765409] system 00:02: [io 0x0c50-0x0c52] has been reserved
04-28 08:52 kernel: [ 0.765412] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
04-28 08:52 kernel: [ 0.765415] system 00:02: [io 0x0c6f] has been reserved
04-28 08:52 kernel: [ 0.765418] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
04-28 08:52 kernel: [ 0.765421] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
04-28 08:52 kernel: [ 0.765424] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
04-28 08:52 kernel: [ 0.765427] system 00:02: [io 0x4000-0x40fe] has been reserved
04-28 08:52 kernel: [ 0.765430] system 00:02: [io 0x4210-0x4217] has been reserved
04-28 08:52 kernel: [ 0.765433] system 00:02: [io 0x0b00-0x0b0f] has been reserved
04-28 08:52 kernel: [ 0.765436] system 00:02: [io 0x0b10-0x0b1f] has been reserved
04-28 08:52 kernel: [ 0.765439] system 00:02: [io 0x0b20-0x0b3f] has been reserved
04-28 08:52 kernel: [ 0.765442] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
04-28 08:52 kernel: [ 0.765457] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
04-28 08:52 kernel: [ 0.765517] pnp 00:03: [dma 4]
04-28 08:52 kernel: [ 0.765518] pnp 00:03: [io 0x0000-0x000f]
04-28 08:52 kernel: [ 0.765520] pnp 00:03: [io 0x0080-0x0090]
04-28 08:52 kernel: [ 0.765521] pnp 00:03: [io 0x0094-0x009f]
04-28 08:52 kernel: [ 0.765522] pnp 00:03: [io 0x00c0-0x00df]
04-28 08:52 kernel: [ 0.765540] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
04-28 08:52 kernel: [ 0.765561] pnp 00:04: [irq 0 disabled]
04-28 08:52 kernel: [ 0.765572] pnp 00:04: [irq 8]
04-28 08:52 kernel: [ 0.765574] pnp 00:04: [mem 0xfed00000-0xfed003ff]
04-28 08:52 kernel: [ 0.765601] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
04-28 08:52 kernel: [ 0.765626] pnp 00:05: [io 0x0070-0x0073]
04-28 08:52 kernel: [ 0.765642] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
04-28 08:52 kernel: [ 0.765646] pnp 00:06: [io 0x0061]
04-28 08:52 kernel: [ 0.765663] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
04-28 08:52 kernel: [ 0.765668] pnp 00:07: [io 0x00f0-0x00ff]
04-28 08:52 kernel: [ 0.765675] pnp 00:07: [irq 13]
04-28 08:52 kernel: [ 0.765692] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
04-28 08:52 kernel: [ 0.765924] pnp 00:08: [mem 0xe0000000-0xefffffff]
04-28 08:52 kernel: [ 0.765953] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
04-28 08:52 kernel: [ 0.765956] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
04-28 08:52 kernel: [ 0.766031] pnp 00:09: [mem 0x000d4400-0x000d7fff]
04-28 08:52 kernel: [ 0.766032] pnp 00:09: [mem 0x000f0000-0x000f7fff]
04-28 08:52 kernel: [ 0.766034] pnp 00:09: [mem 0x000f8000-0x000fbfff]
04-28 08:52 kernel: [ 0.766035] pnp 00:09: [mem 0x000fc000-0x000fffff]
04-28 08:52 kernel: [ 0.766036] pnp 00:09: [mem 0xcfcf0000-0xcfcfffff]
04-28 08:52 kernel: [ 0.766038] pnp 00:09: [mem 0xffff0000-0xffffffff]
04-28 08:52 kernel: [ 0.766039] pnp 00:09: [mem 0x00000000-0x0009ffff]
04-28 08:52 kernel: [ 0.766041] pnp 00:09: [mem 0x00100000-0xcfceffff]
04-28 08:52 kernel: [ 0.766042] pnp 00:09: [mem 0xcfd00000-0xcfdfffff]
04-28 08:52 kernel: [ 0.766043] pnp 00:09: [mem 0xcfe00000-0xcfefffff]
04-28 08:52 kernel: [ 0.766046] pnp 00:09: [mem 0xfec00000-0xfec00fff]
04-28 08:52 kernel: [ 0.766047] pnp 00:09: [mem 0xfee00000-0xfee00fff]
04-28 08:52 kernel: [ 0.766049] pnp 00:09: [mem 0xfff80000-0xfffeffff]
04-28 08:52 kernel: [ 0.766051] pnp 00:09: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.766056] pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.766061] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.766065] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.766070] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.766075] pnp 00:09: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
04-28 08:52 kernel: [ 0.766112] system 00:09: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
04-28 08:52 kernel: [ 0.766115] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
04-28 08:52 kernel: [ 0.766118] system 00:09: [mem 0xcfd00000-0xcfdfffff] has been reserved
04-28 08:52 kernel: [ 0.766121] system 00:09: [mem 0xcfe00000-0xcfefffff] could not be reserved
04-28 08:52 kernel: [ 0.766124] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
04-28 08:52 kernel: [ 0.766127] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
04-28 08:52 kernel: [ 0.766130] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
04-28 08:52 kernel: [ 0.766133] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
04-28 08:52 kernel: [ 0.766146] pnp: PnP ACPI: found 10 devices
04-28 08:52 kernel: [ 0.766148] ACPI: ACPI bus type pnp unregistered
04-28 08:52 kernel: [ 0.772607] PCI: max bus depth: 1 pci_try_num: 2
04-28 08:52 kernel: [ 0.772622] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
04-28 08:52 kernel: [ 0.772627] pci 0000:00:02.0: PCI bridge to [bus 01-01]
04-28 08:52 kernel: [ 0.772630] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
04-28 08:52 kernel: [ 0.772633] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
04-28 08:52 kernel: [ 0.772636] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
04-28 08:52 kernel: [ 0.772641] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
04-28 08:52 kernel: [ 0.772644] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
04-28 08:52 kernel: [ 0.772646] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
04-28 08:52 kernel: [ 0.772649] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
04-28 08:52 kernel: [ 0.772653] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
04-28 08:52 kernel: [ 0.772657] pci 0000:00:14.4: PCI bridge to [bus 03-03]
04-28 08:52 kernel: [ 0.772660] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
04-28 08:52 kernel: [ 0.772665] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
04-28 08:52 kernel: [ 0.772669] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
04-28 08:52 kernel: [ 0.772691] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 0.772695] pci 0000:00:02.0: setting latency timer to 64
04-28 08:52 kernel: [ 0.772699] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 0.772702] pci 0000:00:0a.0: setting latency timer to 64
04-28 08:52 kernel: [ 0.772708] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
04-28 08:52 kernel: [ 0.772709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
04-28 08:52 kernel: [ 0.772711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
04-28 08:52 kernel: [ 0.772712] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
04-28 08:52 kernel: [ 0.772714] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
04-28 08:52 kernel: [ 0.772715] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
04-28 08:52 kernel: [ 0.772717] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
04-28 08:52 kernel: [ 0.772718] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
04-28 08:52 kernel: [ 0.772720] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
04-28 08:52 kernel: [ 0.772722] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
04-28 08:52 kernel: [ 0.772723] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
04-28 08:52 kernel: [ 0.772725] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
04-28 08:52 kernel: [ 0.772727] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
04-28 08:52 kernel: [ 0.772728] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
04-28 08:52 kernel: [ 0.772730] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
04-28 08:52 kernel: [ 0.772732] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
04-28 08:52 kernel: [ 0.772733] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
04-28 08:52 kernel: [ 0.772735] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
04-28 08:52 kernel: [ 0.772736] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
04-28 08:52 kernel: [ 0.772765] NET: Registered protocol family 2
04-28 08:52 kernel: [ 0.772858] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
04-28 08:52 kernel: [ 0.773569] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
04-28 08:52 kernel: [ 0.775873] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
04-28 08:52 kernel: [ 0.776180] TCP: Hash tables configured (established 524288 bind 65536)
04-28 08:52 kernel: [ 0.776184] TCP reno registered
04-28 08:52 kernel: [ 0.776193] UDP hash table entries: 2048 (order: 4, 65536 bytes)
04-28 08:52 kernel: [ 0.776218] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
04-28 08:52 kernel: [ 0.776311] NET: Registered protocol family 1
04-28 08:52 kernel: [ 0.776347] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
04-28 08:52 kernel: [ 0.848052] pci 0000:00:12.0: PCI INT A disabled
04-28 08:52 kernel: [ 0.848070] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
04-28 08:52 kernel: [ 0.920053] pci 0000:00:12.1: PCI INT A disabled
04-28 08:52 kernel: [ 0.920085] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
04-28 08:52 kernel: [ 0.920157] pci 0000:00:12.2: PCI INT B disabled
04-28 08:52 kernel: [ 0.920165] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 0.992053] pci 0000:00:13.0: PCI INT A disabled
04-28 08:52 kernel: [ 0.992071] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 1.064050] pci 0000:00:13.1: PCI INT A disabled
04-28 08:52 kernel: [ 1.064082] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
04-28 08:52 kernel: [ 1.064150] pci 0000:00:13.2: PCI INT B disabled
04-28 08:52 kernel: [ 1.064164] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 1.136054] pci 0000:00:14.5: PCI INT C disabled
04-28 08:52 kernel: [ 1.136075] pci 0000:01:00.0: Boot video device
04-28 08:52 kernel: [ 1.136083] PCI: CLS 64 bytes, default 64
04-28 08:52 kernel: [ 1.136085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
04-28 08:52 kernel: [ 1.136088] Placing 64MB software IO TLB between ffff8800cbc8f000 - ffff8800cfc8f000
04-28 08:52 kernel: [ 1.136091] software IO TLB at phys 0xcbc8f000 - 0xcfc8f000
04-28 08:52 kernel: [ 1.136548] IBS: LVT offset 1 assigned
04-28 08:52 kernel: [ 1.136573] perf: AMD IBS detected (0x0000001f)
04-28 08:52 kernel: [ 1.136695] audit: initializing netlink socket (disabled)
04-28 08:52 kernel: [ 1.136706] type=2000 audit(1367131919.132:1): initialized
04-28 08:52 kernel: [ 1.150452] HugeTLB registered 2 MB page size, pre-allocated 0 pages
04-28 08:52 kernel: [ 1.152088] VFS: Disk quotas dquot_6.5.2
04-28 08:52 kernel: [ 1.152128] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
04-28 08:52 kernel: [ 1.152535] fuse init (API version 7.17)
04-28 08:52 kernel: [ 1.152599] msgmni has been set to 7894
04-28 08:52 kernel: [ 1.153042] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
04-28 08:52 kernel: [ 1.153076] io scheduler noop registered
04-28 08:52 kernel: [ 1.153078] io scheduler deadline registered
04-28 08:52 kernel: [ 1.153097] io scheduler cfq registered (default)
04-28 08:52 kernel: [ 1.153204] pcieport 0000:00:02.0: setting latency timer to 64
04-28 08:52 kernel: [ 1.153239] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
04-28 08:52 kernel: [ 1.153305] pcieport 0000:00:0a.0: setting latency timer to 64
04-28 08:52 kernel: [ 1.153323] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
04-28 08:52 kernel: [ 1.153380] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
04-28 08:52 kernel: [ 1.153394] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
04-28 08:52 kernel: [ 1.153480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
04-28 08:52 kernel: [ 1.153485] ACPI: Power Button [PWRB]
04-28 08:52 kernel: [ 1.153516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
04-28 08:52 kernel: [ 1.153520] ACPI: Power Button [PWRF]
04-28 08:52 kernel: [ 1.153577] ACPI: acpi_idle registered with cpuidle
04-28 08:52 kernel: [ 1.384608] ERST: Table is not found!
04-28 08:52 kernel: [ 1.384612] GHES: HEST is not enabled!
04-28 08:52 kernel: [ 1.384710] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
04-28 08:52 kernel: [ 1.395735] Linux agpgart interface v0.103
04-28 08:52 kernel: [ 1.396983] brd: module loaded
04-28 08:52 kernel: [ 1.397512] loop: module loaded
04-28 08:52 kernel: [ 1.397629] ahci 0000:00:11.0: version 3.0
04-28 08:52 kernel: [ 1.397656] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
04-28 08:52 kernel: [ 1.397831] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
04-28 08:52 kernel: [ 1.397836] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
04-28 08:52 kernel: [ 1.398428] scsi0 : ahci
04-28 08:52 kernel: [ 1.398493] scsi1 : ahci
04-28 08:52 kernel: [ 1.398546] scsi2 : ahci
04-28 08:52 kernel: [ 1.398599] scsi3 : ahci
04-28 08:52 kernel: [ 1.398653] scsi4 : ahci
04-28 08:52 kernel: [ 1.398709] scsi5 : ahci
04-28 08:52 kernel: [ 1.398786] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
04-28 08:52 kernel: [ 1.398790] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
04-28 08:52 kernel: [ 1.398794] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
04-28 08:52 kernel: [ 1.398798] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
04-28 08:52 kernel: [ 1.398802] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
04-28 08:52 kernel: [ 1.398805] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
04-28 08:52 kernel: [ 1.398946] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
04-28 08:52 kernel: [ 1.399209] Fixed MDIO Bus: probed
04-28 08:52 kernel: [ 1.399225] tun: Universal TUN/TAP device driver, 1.6
04-28 08:52 kernel: [ 1.399227] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
04-28 08:52 kernel: [ 1.399273] PPP generic driver version 2.4.2
04-28 08:52 kernel: [ 1.399374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
04-28 08:52 kernel: [ 1.399398] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
04-28 08:52 kernel: [ 1.399414] ehci_hcd 0000:00:12.2: EHCI Host Controller
04-28 08:52 kernel: [ 1.399459] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
04-28 08:52 kernel: [ 1.399468] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
04-28 08:52 kernel: [ 1.399493] ehci_hcd 0000:00:12.2: debug port 1
04-28 08:52 kernel: [ 1.399524] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
04-28 08:52 kernel: [ 1.408030] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
04-28 08:52 kernel: [ 1.408171] hub 1-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.408175] hub 1-0:1.0: 6 ports detected
04-28 08:52 kernel: [ 1.408263] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
04-28 08:52 kernel: [ 1.408276] ehci_hcd 0000:00:13.2: EHCI Host Controller
04-28 08:52 kernel: [ 1.408313] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
04-28 08:52 kernel: [ 1.408322] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
04-28 08:52 kernel: [ 1.408340] ehci_hcd 0000:00:13.2: debug port 1
04-28 08:52 kernel: [ 1.408365] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
04-28 08:52 kernel: [ 1.420031] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
04-28 08:52 kernel: [ 1.420147] hub 2-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.420151] hub 2-0:1.0: 6 ports detected
04-28 08:52 kernel: [ 1.420249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
04-28 08:52 kernel: [ 1.420273] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
04-28 08:52 kernel: [ 1.420287] ohci_hcd 0000:00:12.0: OHCI Host Controller
04-28 08:52 kernel: [ 1.420340] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
04-28 08:52 kernel: [ 1.420368] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
04-28 08:52 kernel: [ 1.480113] hub 3-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.480120] hub 3-0:1.0: 3 ports detected
04-28 08:52 kernel: [ 1.480200] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
04-28 08:52 kernel: [ 1.480213] ohci_hcd 0000:00:12.1: OHCI Host Controller
04-28 08:52 kernel: [ 1.480273] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
04-28 08:52 kernel: [ 1.480287] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
04-28 08:52 kernel: [ 1.540122] hub 4-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.540129] hub 4-0:1.0: 3 ports detected
04-28 08:52 kernel: [ 1.540212] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 1.540224] ohci_hcd 0000:00:13.0: OHCI Host Controller
04-28 08:52 kernel: [ 1.540279] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
04-28 08:52 kernel: [ 1.540306] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
04-28 08:52 kernel: [ 1.600113] hub 5-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.600120] hub 5-0:1.0: 3 ports detected
04-28 08:52 kernel: [ 1.600199] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 1.600212] ohci_hcd 0000:00:13.1: OHCI Host Controller
04-28 08:52 kernel: [ 1.600269] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
04-28 08:52 kernel: [ 1.600285] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
04-28 08:52 kernel: [ 1.660179] hub 6-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.660186] hub 6-0:1.0: 3 ports detected
04-28 08:52 kernel: [ 1.660267] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 1.660280] ohci_hcd 0000:00:14.5: OHCI Host Controller
04-28 08:52 kernel: [ 1.660337] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
04-28 08:52 kernel: [ 1.660352] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
04-28 08:52 kernel: [ 1.716124] ata6: SATA link down (SStatus 0 SControl 300)
04-28 08:52 kernel: [ 1.716160] ata4: SATA link down (SStatus 0 SControl 300)
04-28 08:52 kernel: [ 1.716199] ata5: SATA link down (SStatus 0 SControl 300)
04-28 08:52 kernel: [ 1.720037] usb 1-3: new high-speed USB device number 2 using ehci_hcd
04-28 08:52 kernel: [ 1.720168] hub 7-0:1.0: USB hub found
04-28 08:52 kernel: [ 1.720176] hub 7-0:1.0: 2 ports detected
04-28 08:52 kernel: [ 1.720253] uhci_hcd: USB Universal Host Controller Interface driver
04-28 08:52 kernel: [ 1.720303] usbcore: registered new interface driver libusual
04-28 08:52 kernel: [ 1.720324] i8042: PNP: No PS/2 controller found. Probing ports directly.
04-28 08:52 kernel: [ 1.720512] mousedev: PS/2 mouse device common for all mice
04-28 08:52 kernel: [ 1.720636] rtc_cmos 00:05: RTC can wake from S4
04-28 08:52 kernel: [ 1.720731] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
04-28 08:52 kernel: [ 1.720766] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
04-28 08:52 kernel: [ 1.720824] device-mapper: uevent: version 1.0.3
04-28 08:52 kernel: [ 1.720884] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
04-28 08:52 kernel: [ 1.720957] cpuidle: using governor ladder
04-28 08:52 kernel: [ 1.721129] cpuidle: using governor menu
04-28 08:52 kernel: [ 1.721131] EFI Variables Facility v0.08 2004-May-17
04-28 08:52 kernel: [ 1.721278] TCP cubic registered
04-28 08:52 kernel: [ 1.721361] NET: Registered protocol family 10
04-28 08:52 kernel: [ 1.721655] NET: Registered protocol family 17
04-28 08:52 kernel: [ 1.721658] Registering the dns_resolver key type
04-28 08:52 kernel: [ 1.721806] registered taskstats version 1
04-28 08:52 kernel: [ 1.727271] Magic number: 9:66:874
04-28 08:52 kernel: [ 1.727413] rtc_cmos 00:05: setting system clock to 2013-04-28 06:52:00 UTC (1367131920)
04-28 08:52 kernel: [ 1.727458] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
04-28 08:52 kernel: [ 1.727491] powernow-k8: Core Performance Boosting: on.
04-28 08:52 kernel: [ 1.727523] powernow-k8: 0 : pstate 0 (3200 MHz)
04-28 08:52 kernel: [ 1.727526] powernow-k8: 1 : pstate 1 (2400 MHz)
04-28 08:52 kernel: [ 1.727528] powernow-k8: 2 : pstate 2 (1600 MHz)
04-28 08:52 kernel: [ 1.727530] powernow-k8: 3 : pstate 3 (800 MHz)
04-28 08:52 kernel: [ 1.728168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
04-28 08:52 kernel: [ 1.728172] EDD information not available.
04-28 08:52 kernel: [ 1.888096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
04-28 08:52 kernel: [ 1.888128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
04-28 08:52 kernel: [ 1.888159] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
04-28 08:52 kernel: [ 1.889110] ata3.00: ATAPI: TSSTcorp DVDWBD SH-B123L, SB04, max UDMA/100
04-28 08:52 kernel: [ 1.890639] ata3.00: configured for UDMA/100
04-28 08:52 kernel: [ 1.893831] ata2.00: ATA-8: WDC WD6400AAKS-75A7B2, 01.03B01, max UDMA/133
04-28 08:52 kernel: [ 1.893836] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
04-28 08:52 kernel: [ 1.894858] ata2.00: configured for UDMA/133
04-28 08:52 kernel: [ 1.941073] ata1.00: ATA-8: Patriot Inferno 60GB SSD, 320A13F0, max UDMA/133
04-28 08:52 kernel: [ 1.941078] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
04-28 08:52 kernel: [ 1.991076] ata1.00: configured for UDMA/133
04-28 08:52 kernel: [ 1.991274] scsi 0:0:0:0: Direct-Access ATA Patriot Inferno 320A PQ: 0 ANSI: 5
04-28 08:52 kernel: [ 1.991420] sd 0:0:0:0: Attached scsi generic sg0 type 0
04-28 08:52 kernel: [ 1.991526] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
04-28 08:52 kernel: [ 1.991629] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
04-28 08:52 kernel: [ 1.991771] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
04-28 08:52 kernel: [ 1.991775] sd 1:0:0:0: Attached scsi generic sg1 type 0
04-28 08:52 kernel: [ 1.991783] sd 0:0:0:0: [sda] Write Protect is off
04-28 08:52 kernel: [ 1.991789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
04-28 08:52 kernel: [ 1.991852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
04-28 08:52 kernel: [ 1.991919] sd 1:0:0:0: [sdb] Write Protect is off
04-28 08:52 kernel: [ 1.991925] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
04-28 08:52 kernel: [ 1.991976] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
04-28 08:52 kernel: [ 1.992462] sda: sda1 sda2
04-28 08:52 kernel: [ 1.992634] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD SH-B123L SB04 PQ: 0 ANSI: 5
04-28 08:52 kernel: [ 1.992974] sd 0:0:0:0: [sda] Attached SCSI disk
04-28 08:52 kernel: [ 1.994432] sdb: sdb1 sdb2
04-28 08:52 kernel: [ 1.994971] sd 1:0:0:0: [sdb] Attached SCSI disk
04-28 08:52 kernel: [ 1.995513] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
04-28 08:52 kernel: [ 1.995519] cdrom: Uniform CD-ROM driver Revision: 3.20
04-28 08:52 kernel: [ 1.995626] sr 2:0:0:0: Attached scsi CD-ROM sr0
04-28 08:52 kernel: [ 1.995701] sr 2:0:0:0: Attached scsi generic sg2 type 5
04-28 08:52 kernel: [ 1.996886] Freeing unused kernel memory: 920k freed
04-28 08:52 kernel: [ 1.997089] Write protecting the kernel read-only data: 12288k
04-28 08:52 kernel: [ 2.000753] Freeing unused kernel memory: 1600k freed
04-28 08:52 kernel: [ 2.003892] Freeing unused kernel memory: 1192k freed
04-28 08:52 kernel: [ 2.030774] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
04-28 08:52 kernel: [ 2.030801] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 2.030834] r8169 0000:02:00.0: setting latency timer to 64
04-28 08:52 kernel: [ 2.030874] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
04-28 08:52 kernel: [ 2.031224] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000652000, 6c:f0:49:75:ca:25, XID 1c4000c0 IRQ 42
04-28 08:52 kernel: [ 2.031229] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
04-28 08:52 kernel: [ 2.042294] scsi6 : pata_atiixp
04-28 08:52 kernel: [ 2.042388] scsi7 : pata_atiixp
04-28 08:52 kernel: [ 2.042802] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
04-28 08:52 kernel: [ 2.042806] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
04-28 08:52 kernel: [ 2.075532] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
04-28 08:52 kernel: [ 2.140062] Refined TSC clocksource calibration: 3214.524 MHz.
04-28 08:52 kernel: [ 2.140070] Switching to clocksource tsc
04-28 08:52 kernel: [ 2.508060] usb 6-3: new full-speed USB device number 2 using ohci_hcd
04-28 08:52 kernel: [ 2.531720] ADDRCONF(NETDEV_UP): eth0: link is not ready
04-28 08:52 kernel: [ 2.569168] it87: Found IT8720F chip at 0x228, revision 8
04-28 08:52 kernel: [ 2.569189] it87: Routing internal VCCH to in7
04-28 08:52 kernel: [ 2.569194] it87: Beeping is supported
04-28 08:52 kernel: [ 2.677892] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
04-28 08:52 kernel: [ 2.677896] Disabling lock debugging due to kernel taint
04-28 08:52 kernel: [ 2.678372] ip_tables: (C) 2000-2006 Netfilter Core Team
04-28 08:52 kernel: [ 2.678940] type=1400 audit(1367131921.448:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=400 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.678953] type=1400 audit(1367131921.448:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=473 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.679282] type=1400 audit(1367131921.448:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=400 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.679300] type=1400 audit(1367131921.448:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.679475] type=1400 audit(1367131921.448:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=400 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.679496] type=1400 audit(1367131921.448:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.684047] type=1400 audit(1367131921.456:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=541 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.684553] type=1400 audit(1367131921.456:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=540 comm="apparmor_parser"
04-28 08:52 kernel: [ 2.687375] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
04-28 08:52 kernel: [ 2.688247] Linux video capture interface: v2.00
04-28 08:52 kernel: [ 2.691719] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
04-28 08:52 kernel: [ 2.692979] usbcore: registered new interface driver usbhid
04-28 08:52 kernel: [ 2.692981] usbhid: USB HID core driver
04-28 08:52 kernel: [ 2.694565] snd_hdsp 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
04-28 08:52 kernel: [ 2.697301] ip6_tables: (C) 2000-2006 Netfilter Core Team
04-28 08:52 kernel: [ 2.704333] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2
04-28 08:52 kernel: [ 2.719268] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/input/input2
04-28 08:52 kernel: [ 2.719720] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:13.1-3:1
04-28 08:52 kernel: [ 2.720164] input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/input/input3
04-28 08:52 kernel: [ 2.720264] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:13.1-3:2
04-28 08:52 kernel: [ 2.723641] [fglrx] Maximum main memory to use for locked dma buffers: 3788 MBytes.
04-28 08:52 kernel: [ 2.723839] [fglrx] vendor: 1002 device: 683f count: 1
04-28 08:52 kernel: [ 2.724207] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
04-28 08:52 kernel: [ 2.724220] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
04-28 08:52 kernel: [ 2.724224] pci 0000:01:00.0: setting latency timer to 64
04-28 08:52 kernel: [ 2.724381] [fglrx] Kernel PAT support is enabled
04-28 08:52 kernel: [ 2.724395] [fglrx] module loaded - fglrx 12.10.5 [Mar 20 2013] with 1 minors
04-28 08:52 kernel: [ 2.860795] r8169 0000:02:00.0: eth0: link down
04-28 08:52 kernel: [ 2.860807] r8169 0000:02:00.0: eth0: link down
04-28 08:52 kernel: [ 2.861142] ADDRCONF(NETDEV_UP): eth0: link is not ready
04-28 08:52 kernel: [ 2.904477] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.2/input/input4
04-28 08:52 kernel: [ 2.904559] usbcore: registered new interface driver uvcvideo
04-28 08:52 kernel: [ 2.904561] USB Video Class driver (1.1.1)
04-28 08:52 kernel: [ 2.959278] usbcore: registered new interface driver snd-usb-audio
04-28 08:52 kernel: [ 3.072438] EXT4-fs (sda1): re-mounted. Opts: discard,commit=60,errors=remount-ro
04-28 08:52 kernel: [ 3.075680] vesafb: mode is 1280x720x32, linelength=5120, pages=0
04-28 08:52 kernel: [ 3.075683] vesafb: scrolling: redraw
04-28 08:52 kernel: [ 3.075685] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
04-28 08:52 kernel: [ 3.082461] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 3648k, total 3648k
04-28 08:52 kernel: [ 3.082651] Console: switching to colour frame buffer device 160x45
04-28 08:52 kernel: [ 3.084832] fb0: VESA VGA frame buffer device
04-28 08:52 kernel: [ 3.101710] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,commit=60
04-28 08:52 kernel: [ 3.212246] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
04-28 08:52 kernel: [ 3.243465] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
04-28 08:52 kernel: [ 3.294467] init: failsafe main process (799) killed by TERM signal
04-28 08:52 kernel: [ 3.325650] type=1400 audit(1367131922.096:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=856 comm="apparmor_parser"
04-28 08:52 cron: <78>Apr 28 08:52:02 cron[921]: (CRON) INFO (pidfile fd = 3)
04-28 08:52 cron: <78>Apr 28 08:52:02 cron[944]: (CRON) STARTUP (fork ok)
04-28 08:52 acpid: <30>Apr 28 08:52:02 acpid: starting up with proc fs
04-28 08:52 acpid: <30>Apr 28 08:52:02 acpid: 3 rules loaded
04-28 08:52 acpid: <30>Apr 28 08:52:02 acpid: waiting for events: event logging is off
04-28 08:52 cron: <78>Apr 28 08:52:02 cron[944]: (CRON) INFO (Running @reboot jobs)
04-28 08:52 ntpd: <29>Apr 28 08:52:02 ntpd[987]: ntpd 4.2.6p3@1.2290-o Tue Jun 5 20:12:08 UTC 2012 (1)
04-28 08:52 ntpd: <29>Apr 28 08:52:02 ntpd[988]: proto: precision = 0.103 usec
04-28 08:52 ntpd: <31>Apr 28 08:52:02 ntpd[988]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
04-28 08:52 ntpd: <30>Apr 28 08:52:02 ntpd[988]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
04-28 08:52 ntpd: <30>Apr 28 08:52:02 ntpd[988]: Listen and drop on 1 v6wildcard :: UDP 123
04-28 08:52 ntpd: <30>Apr 28 08:52:02 ntpd[988]: Listen normally on 2 lo 127.0.0.1 UDP 123
04-28 08:52 ntpd: <30>Apr 28 08:52:02 ntpd[988]: Listen normally on 3 eth0 178.83.68.34 UDP 123
04-28 08:52 ntpd: <30>Apr 28 08:52:02 ntpd[988]: peers refreshed
04-28 08:52 ntpd: <30>Apr 28 08:52:02 ntpd[988]: Listening on routing socket on fd #20 for interface updates
04-28 08:52 dbus: <29>Apr 28 08:52:03 dbus[907]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
04-28 08:52 dbus: <29>Apr 28 08:52:03 dbus[907]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
04-28 08:52 polkitd: <30>Apr 28 08:52:03 polkitd[1139]: started daemon version 0.104 using authority implementation `local' version `0.104'
04-28 08:52 dbus: <29>Apr 28 08:52:03 dbus[907]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
04-28 08:52 dbus: <29>Apr 28 08:52:03 dbus[907]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
04-28 08:52 acpid: <29>Apr 28 08:52:03 acpid: client connected from 1268[0:0]
04-28 08:52 acpid: <30>Apr 28 08:52:03 acpid: 1 client rule loaded
04-28 08:52 kernel: [ 4.898292] fglrx_pci 0000:01:00.0: irq 43 for MSI/MSI-X
04-28 08:52 kernel: [ 4.898718] [fglrx] Firegl kernel thread PID: 1272
04-28 08:52 kernel: [ 4.898783] [fglrx] Firegl kernel thread PID: 1273
04-28 08:52 kernel: [ 4.898835] [fglrx] Firegl kernel thread PID: 1274
04-28 08:52 kernel: [ 4.898933] [fglrx] IRQ 43 Enabled
04-28 08:52 kernel: [ 4.906081] [fglrx] Reserved FB block: Shared offset:0, size:1000000
04-28 08:52 kernel: [ 4.906083] [fglrx] Reserved FB block: Unshared offset:f920000, size:3e0000
04-28 08:52 kernel: [ 4.906084] [fglrx] Reserved FB block: Unshared offset:3ffee000, size:12000
04-28 08:52 kernel: [ 5.215243] r8169 0000:02:00.0: eth0: link up
04-28 08:52 kernel: [ 5.215547] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
04-28 08:52 dbus: <29>Apr 28 08:52:04 dbus[907]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
04-28 08:52 dbus: <29>Apr 28 08:52:04 dbus[907]: [system] Successfully activated service 'org.freedesktop.UDisks'Dernière modification par faucon50 (Le 28/04/2013, à 12:06)
#32 Le 28/04/2013, à 12:29
- Compte supprimé
Re : demarrage en 25 sec
Merci faucon50 pour le lien
L'ordinateur démarre en 10,7 secondes. (ouais enfin sans compter le BIOS…)
C'est 7 secondes plus rapide.
ludovic@Super-Ordinateur:~$ dmesg -r
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.2.0-40-lowlatency (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP PREEMPT Wed Apr 3 18:26:22 UTC 2013 (Ubuntu 3.2.0-40.43-lowlatency 3.2.40)
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash vt.handoff=7
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<6>[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000afde0000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000afde0000 - 00000000afdea000 (ACPI data)
<6>[ 0.000000] BIOS-e820: 00000000afdea000 - 00000000afdeb000 (ACPI NVS)
<6>[ 0.000000] BIOS-e820: 00000000afdeb000 - 00000000b0000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000b4000000 - 00000000b8000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000250000000 (usable)
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] SMBIOS 2.4 present.
<7>[ 0.000000] DMI: Tyan Computer Corporation MCP55 /S2915 , BIOS 4.01d.2915 05/25/2010
<7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] last_pfn = 0x250000 max_arch_pfn = 0x400000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-BFFFF uncachable
<7>[ 0.000000] C0000-D3FFF write-protect
<7>[ 0.000000] D4000-E3FFF uncachable
<7>[ 0.000000] E4000-FFFFF write-protect
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
<7>[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
<7>[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
<7>[ 0.000000] 3 disabled
<7>[ 0.000000] 4 disabled
<7>[ 0.000000] 5 disabled
<7>[ 0.000000] 6 disabled
<7>[ 0.000000] 7 disabled
<7>[ 0.000000] TOM2: 0000000250000000 aka 9472M
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
<6>[ 0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000
<6>[ 0.000000] found SMP MP-table at [ffff8800000f7940] f7940
<7>[ 0.000000] initial memory mapped : 0 - 20000000
<7>[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
<6>[ 0.000000] Using GB pages for direct mapping
<6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000afde0000
<7>[ 0.000000] 0000000000 - 0080000000 page 1G
<7>[ 0.000000] 0080000000 - 00afc00000 page 2M
<7>[ 0.000000] 00afc00000 - 00afde0000 page 4k
<7>[ 0.000000] kernel direct mapping tables up to afde0000 @ 1fffd000-20000000
<6>[ 0.000000] init_memory_mapping: 0000000100000000-0000000250000000
<7>[ 0.000000] 0100000000 - 0240000000 page 1G
<7>[ 0.000000] 0240000000 - 0250000000 page 2M
<7>[ 0.000000] kernel direct mapping tables up to 250000000 @ afdde000-afde0000
<6>[ 0.000000] RAMDISK: 35606000 - 36afb000
<4>[ 0.000000] ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
<4>[ 0.000000] ACPI: XSDT 00000000afde2a70 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: FACP 00000000afde87c2 000F4 (v03 NVIDIA CK8S 06040000 PTL_ 000F4240)
<4>[ 0.000000] ACPI: DSDT 00000000afde2ad4 05C7A (v01 NVIDIA CK8 06040000 MSFT 03000000)
<4>[ 0.000000] ACPI: FACS 00000000afdeafc0 00040
<4>[ 0.000000] ACPI: SRAT 00000000afde88b6 00150 (v01 AMD FAM_F_10 06040000 AMD 00000001)
<4>[ 0.000000] ACPI: SSDT 00000000afde8a06 0143C (v01 AMD POWERNOW 06040000 AMD 00000001)
<4>[ 0.000000] ACPI: SPCR 00000000afde9e42 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
<4>[ 0.000000] ACPI: MCFG 00000000afde9e92 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: HPET 00000000afde9ece 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
<4>[ 0.000000] ACPI: APIC 00000000afde9f06 000D2 (v01 PTLTD ? APIC 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: BOOT 00000000afde9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
<6>[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
<6>[ 0.000000] SRAT: Node 0 PXM 0 100000-b0000000
<6>[ 0.000000] SRAT: Node 0 PXM 0 100000000-150000000
<6>[ 0.000000] SRAT: Node 1 PXM 1 150000000-250000000
<6>[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,b0000000) -> [0,b0000000)
<6>[ 0.000000] NUMA: Node 0 [0,b0000000) + [100000000,150000000) -> [0,150000000)
<6>[ 0.000000] Initmem setup node 0 0000000000000000-0000000150000000
<6>[ 0.000000] NODE_DATA [000000014fffb000 - 000000014fffffff]
<6>[ 0.000000] Initmem setup node 1 0000000150000000-0000000250000000
<6>[ 0.000000] NODE_DATA [000000024fffb000 - 000000024fffffff]
<7>[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014be00000-ffff88014fdfffff] on node 0
<7>[ 0.000000] [ffffea0005400000-ffffea00093fffff] PMD -> [ffff88024b600000-ffff88024f5fffff] on node 1
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000010 -> 0x00001000
<4>[ 0.000000] DMA32 0x00001000 -> 0x00100000
<4>[ 0.000000] Normal 0x00100000 -> 0x00250000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[4] active PFN ranges
<4>[ 0.000000] 0: 0x00000010 -> 0x0000009b
<4>[ 0.000000] 0: 0x00000100 -> 0x000afde0
<4>[ 0.000000] 0: 0x00100000 -> 0x00150000
<4>[ 0.000000] 1: 0x00150000 -> 0x00250000
<7>[ 0.000000] On node 0 totalpages: 1047915
<7>[ 0.000000] DMA zone: 64 pages used for memmap
<7>[ 0.000000] DMA zone: 5 pages reserved
<7>[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
<7>[ 0.000000] DMA32 zone: 16320 pages used for memmap
<7>[ 0.000000] DMA32 zone: 699936 pages, LIFO batch:31
<7>[ 0.000000] Normal zone: 5120 pages used for memmap
<7>[ 0.000000] Normal zone: 322560 pages, LIFO batch:31
<7>[ 0.000000] On node 1 totalpages: 1048576
<7>[ 0.000000] Normal zone: 16384 pages used for memmap
<7>[ 0.000000] Normal zone: 1032192 pages, LIFO batch:31
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
<6>[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xc8000000] gsi_base[24])
<6>[ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xc8000000, GSI 24-47
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>[ 0.000000] nr_irqs_gsi: 64
<6>[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
<6>[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
<6>[ 0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afdea000
<6>[ 0.000000] PM: Registered nosave memory: 00000000afdea000 - 00000000afdeb000
<6>[ 0.000000] PM: Registered nosave memory: 00000000afdeb000 - 00000000b0000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000e0000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
<6>[ 0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
<6>[ 0.000000] Booting paravirtualized kernel on bare hardware
<6>[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:2
<6>[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014bc00000 s83328 r8192 d23168 u524288
<7>[ 0.000000] pcpu-alloc: s83328 r8192 d23168 u524288 alloc=1*2097152
<7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
<4>[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2058598
<4>[ 0.000000] Policy zone: Normal
<5>[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash vt.handoff=7
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.000000] Checking aperture...
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] Node 0: aperture @ b4000000 size 64 MB
<6>[ 0.000000] Node 1: aperture @ b4000000 size 64 MB
<6>[ 0.000000] Memory: 8150588k/9699328k available (6632k kernel code, 1313364k absent, 235376k reserved, 6576k data, 868k init)
<6>[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:16640 nr_irqs:1152 16
<6>[ 0.000000] Extended CMOS year: 2000
<7>[ 0.000000] spurious 8259A interrupt: IRQ7.
<6>[ 0.000000] vt handoff: transparent VT on vt#7
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] console [tty0] enabled
<6>[ 0.000000] allocated 67108864 bytes of page_cgroup
<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>[ 0.000000] hpet clockevent registered
<4>[ 0.000000] Fast TSC calibration using PIT
<4>[ 0.000000] Detected 2299.900 MHz processor.
<6>[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.80 BogoMIPS (lpj=2299900)
<6>[ 0.001010] pid_max: default: 32768 minimum: 301
<6>[ 0.001055] Security Framework initialized
<6>[ 0.001070] AppArmor: AppArmor initialized
<6>[ 0.001072] Yama: becoming mindful.
<6>[ 0.002483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[ 0.006153] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[ 0.007745] Mount-cache hash table entries: 256
<6>[ 0.007930] Initializing cgroup subsys cpuacct
<6>[ 0.007937] Initializing cgroup subsys memory
<6>[ 0.007965] Initializing cgroup subsys devices
<6>[ 0.007968] Initializing cgroup subsys freezer
<6>[ 0.007970] Initializing cgroup subsys blkio
<6>[ 0.007977] Initializing cgroup subsys perf_event
<7>[ 0.008023] tseg: 00afe00000
<6>[ 0.008025] CPU: Physical Processor ID: 0
<6>[ 0.008027] CPU: Processor Core ID: 0
<6>[ 0.008029] mce: CPU supports 6 MCE banks
<6>[ 0.008039] using AMD E400 aware idle routine
<6>[ 0.008804] ACPI: Core revision 20110623
<6>[ 0.013011] ftrace: allocating 26511 entries in 104 pages
<6>[ 0.016663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.026707] CPU0: Quad-Core AMD Opteron(tm) Processor 2356 stepping 03
<6>[ 0.026998] Performance Events: AMD PMU driver.
<6>[ 0.026998] ... version: 0
<6>[ 0.026998] ... bit width: 48
<6>[ 0.026998] ... generic registers: 4
<6>[ 0.026998] ... value mask: 0000ffffffffffff
<6>[ 0.026998] ... max period: 00007fffffffffff
<6>[ 0.026998] ... fixed-purpose events: 0
<6>[ 0.026998] ... event mask: 000000000000000f
<6>[ 0.032084] NMI watchdog enabled, takes one hw-pmu counter.
<6>[ 0.040023] Booting Node 0, Processors #1
<7>[ 0.040026] smpboot cpu 1: start_ip = 96000
<6>[ 0.112016] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.118009] #2
<7>[ 0.118011] smpboot cpu 2: start_ip = 96000
<6>[ 0.190001] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.195997] #3
<7>[ 0.195998] smpboot cpu 3: start_ip = 96000
<6>[ 0.267989] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.273989] Ok.
<6>[ 0.273991] Booting Node 1, Processors #4
<7>[ 0.273993] smpboot cpu 4: start_ip = 96000
<6>[ 0.345982] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.351976] #5
<7>[ 0.351977] smpboot cpu 5: start_ip = 96000
<6>[ 0.423970] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.429966] #6
<7>[ 0.429968] smpboot cpu 6: start_ip = 96000
<6>[ 0.501958] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.507952] #7 Ok.
<7>[ 0.507954] smpboot cpu 7: start_ip = 96000
<6>[ 0.579946] NMI watchdog enabled, takes one hw-pmu counter.
<6>[ 0.581924] Brought up 8 CPUs
<6>[ 0.581928] Total of 8 processors activated (36812.59 BogoMIPS).
<6>[ 0.583989] devtmpfs: initialized
<6>[ 0.585410] EVM: security.selinux
<6>[ 0.585412] EVM: security.SMACK64
<6>[ 0.585413] EVM: security.capability
<6>[ 0.585446] PM: Registering ACPI NVS region at afdea000 (4096 bytes)
<6>[ 0.586692] print_constraints: dummy:
<6>[ 0.586741] RTC time: 10:24:17, date: 04/28/13
<6>[ 0.586785] NET: Registered protocol family 16
<7>[ 0.586911] node 0 link 2: io port [1000, 4fff]
<7>[ 0.586914] node 1 link 0: io port [5000, 5fff]
<7>[ 0.586917] node 1 link 0: io port [f000, ffff]
<6>[ 0.586926] TOM: 00000000b0000000 aka 2816M
<7>[ 0.586929] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
<7>[ 0.586932] node 0 link 2: mmio [b8000000, c7ffffff]
<7>[ 0.586936] node 1 link 0: mmio [c8000000, cfffffff]
<7>[ 0.586939] node 0 link 2: mmio [a0000, bffff]
<7>[ 0.586942] node 0 link 2: mmio [e0000000, e7ffffff] ==> none
<7>[ 0.586945] node 1 link 0: mmio [e8000000, efffffff] ==> none
<6>[ 0.586947] TOM2: 0000000250000000 aka 9472M
<7>[ 0.586950] bus: [00, 7f] on node 0 link 2
<7>[ 0.586952] bus: 00 index 0 [io 0x0000-0x4fff]
<7>[ 0.586953] bus: 00 index 1 [io 0x6000-0xefff]
<7>[ 0.586955] bus: 00 index 2 [mem 0xb0000000-0xc7ffffff]
<7>[ 0.586957] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
<7>[ 0.586959] bus: 00 index 4 [mem 0xf0000000-0xffffffff]
<7>[ 0.586961] bus: 00 index 5 [mem 0xd0000000-0xdfffffff]
<7>[ 0.586963] bus: 00 index 6 [mem 0x250000000-0xfcffffffff]
<7>[ 0.586965] bus: [80, ff] on node 1 link 0
<7>[ 0.586966] bus: 80 index 0 [io 0x5000-0x5fff]
<7>[ 0.586968] bus: 80 index 1 [io 0xf000-0xffff]
<7>[ 0.586970] bus: 80 index 2 [mem 0xc8000000-0xcfffffff]
<6>[ 0.586799] Trying to unpack rootfs image as initramfs...
<6>[ 0.586978] Extended Config Space enabled on 2 nodes
<6>[ 0.587016] ACPI: bus type pci registered
<6>[ 0.587087] PCI: MMCONFIG for domain 0000 [bus 00-82] at [mem 0xe0000000-0xe82fffff] (base 0xe0000000)
<6>[ 0.587091] PCI: MMCONFIG at [mem 0xe0000000-0xe82fffff] reserved in E820
<6>[ 0.599490] PCI: Using configuration type 1 for base access
<6>[ 0.600550] bio: create slab <bio-0> at 0
<6>[ 0.600550] ACPI: Added _OSI(Module Device)
<6>[ 0.600550] ACPI: Added _OSI(Processor Device)
<6>[ 0.600550] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.600550] ACPI: Added _OSI(Processor Aggregator Device)
<7>[ 0.601729] ACPI: EC: Look up EC in DSDT
<6>[ 0.605344] ACPI: Interpreter enabled
<6>[ 0.605350] ACPI: (supports S0 S1 S3 S4 S5)
<6>[ 0.605371] ACPI: Using IOAPIC for interrupt routing
<6>[ 0.611659] ACPI: No dock devices found.
<6>[ 0.611663] HEST: Table not found.
<6>[ 0.611667] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 0.611788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
<6>[ 0.612009] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
<6>[ 0.612011] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
<6>[ 0.612014] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
<6>[ 0.612016] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x4fff]
<6>[ 0.612018] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[ 0.612021] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
<6>[ 0.612023] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xc7ffffff]
<6>[ 0.612030] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[ 0.612059] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
<7>[ 0.612254] pci 0000:00:01.0: [10de:0364] type 0 class 0x000601
<7>[ 0.612262] pci 0000:00:01.0: reg 10: [io 0x1c00-0x1c7f]
<7>[ 0.612316] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
<7>[ 0.612329] pci 0000:00:01.1: reg 10: [io 0x2000-0x203f]
<7>[ 0.612349] pci 0000:00:01.1: reg 20: [io 0x2440-0x247f]
<7>[ 0.612355] pci 0000:00:01.1: reg 24: [io 0x2400-0x243f]
<7>[ 0.612389] pci 0000:00:01.1: PME# supported from D3hot D3cold
<7>[ 0.612395] pci 0000:00:01.1: PME# disabled
<7>[ 0.612416] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
<7>[ 0.612426] pci 0000:00:02.0: reg 10: [mem 0xb8004000-0xb8004fff]
<7>[ 0.612463] pci 0000:00:02.0: supports D1 D2
<7>[ 0.612466] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.612469] pci 0000:00:02.0: PME# disabled
<7>[ 0.612481] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
<7>[ 0.612491] pci 0000:00:02.1: reg 10: [mem 0xb8005000-0xb80050ff]
<7>[ 0.612531] pci 0000:00:02.1: supports D1 D2
<7>[ 0.612533] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.612536] pci 0000:00:02.1: PME# disabled
<7>[ 0.612553] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
<7>[ 0.612573] pci 0000:00:04.0: reg 20: [io 0x2480-0x248f]
<7>[ 0.612603] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
<7>[ 0.612613] pci 0000:00:05.0: reg 10: [io 0x24d0-0x24d7]
<7>[ 0.612619] pci 0000:00:05.0: reg 14: [io 0x24c4-0x24c7]
<7>[ 0.612624] pci 0000:00:05.0: reg 18: [io 0x24c8-0x24cf]
<7>[ 0.612629] pci 0000:00:05.0: reg 1c: [io 0x24c0-0x24c3]
<7>[ 0.612634] pci 0000:00:05.0: reg 20: [io 0x2490-0x249f]
<7>[ 0.612640] pci 0000:00:05.0: reg 24: [mem 0xb8006000-0xb8006fff]
<7>[ 0.612676] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
<7>[ 0.612686] pci 0000:00:05.1: reg 10: [io 0x24e8-0x24ef]
<7>[ 0.612691] pci 0000:00:05.1: reg 14: [io 0x24dc-0x24df]
<7>[ 0.612697] pci 0000:00:05.1: reg 18: [io 0x24e0-0x24e7]
<7>[ 0.612702] pci 0000:00:05.1: reg 1c: [io 0x24d8-0x24db]
<7>[ 0.612707] pci 0000:00:05.1: reg 20: [io 0x24a0-0x24af]
<7>[ 0.612712] pci 0000:00:05.1: reg 24: [mem 0xb8007000-0xb8007fff]
<7>[ 0.612748] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
<7>[ 0.612758] pci 0000:00:05.2: reg 10: [io 0x2800-0x2807]
<7>[ 0.612763] pci 0000:00:05.2: reg 14: [io 0x24f4-0x24f7]
<7>[ 0.612768] pci 0000:00:05.2: reg 18: [io 0x24f8-0x24ff]
<7>[ 0.612773] pci 0000:00:05.2: reg 1c: [io 0x24f0-0x24f3]
<7>[ 0.612779] pci 0000:00:05.2: reg 20: [io 0x24b0-0x24bf]
<7>[ 0.612784] pci 0000:00:05.2: reg 24: [mem 0xb8008000-0xb8008fff]
<7>[ 0.612822] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
<7>[ 0.612862] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
<7>[ 0.612874] pci 0000:00:06.1: reg 10: [mem 0xb8000000-0xb8003fff]
<7>[ 0.612926] pci 0000:00:06.1: PME# supported from D3hot D3cold
<7>[ 0.612929] pci 0000:00:06.1: PME# disabled
<7>[ 0.612954] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
<7>[ 0.612967] pci 0000:00:08.0: reg 10: [mem 0xb8009000-0xb8009fff]
<7>[ 0.612973] pci 0000:00:08.0: reg 14: [io 0x2808-0x280f]
<7>[ 0.612978] pci 0000:00:08.0: reg 18: [mem 0xb8005800-0xb80058ff]
<7>[ 0.612983] pci 0000:00:08.0: reg 1c: [mem 0xb8005400-0xb800540f]
<7>[ 0.613022] pci 0000:00:08.0: supports D1 D2
<7>[ 0.613024] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.613028] pci 0000:00:08.0: PME# disabled
<7>[ 0.613047] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
<7>[ 0.613059] pci 0000:00:09.0: reg 10: [mem 0xb800b000-0xb800bfff]
<7>[ 0.613065] pci 0000:00:09.0: reg 14: [io 0x2810-0x2817]
<7>[ 0.613070] pci 0000:00:09.0: reg 18: [mem 0xb800a000-0xb800a0ff]
<7>[ 0.613075] pci 0000:00:09.0: reg 1c: [mem 0xb8005c00-0xb8005c0f]
<7>[ 0.613114] pci 0000:00:09.0: supports D1 D2
<7>[ 0.613116] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.613120] pci 0000:00:09.0: PME# disabled
<7>[ 0.613137] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
<7>[ 0.613175] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.613177] pci 0000:00:0a.0: PME# disabled
<7>[ 0.613196] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
<7>[ 0.613231] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.613234] pci 0000:00:0d.0: PME# disabled
<7>[ 0.613251] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
<7>[ 0.613286] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.613289] pci 0000:00:0f.0: PME# disabled
<7>[ 0.613309] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
<7>[ 0.613342] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
<7>[ 0.613361] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
<7>[ 0.613383] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
<7>[ 0.613407] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
<7>[ 0.613430] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
<7>[ 0.613465] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
<7>[ 0.613486] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
<7>[ 0.613507] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
<7>[ 0.613533] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
<7>[ 0.613584] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
<7>[ 0.613597] pci 0000:01:05.0: reg 10: [mem 0xb8104000-0xb81047ff]
<7>[ 0.613605] pci 0000:01:05.0: reg 14: [mem 0xb8100000-0xb8103fff]
<7>[ 0.613652] pci 0000:01:05.0: supports D1 D2
<7>[ 0.613654] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
<7>[ 0.613658] pci 0000:01:05.0: PME# disabled
<6>[ 0.613685] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
<7>[ 0.613690] pci 0000:00:06.0: bridge window [mem 0xb8100000-0xb81fffff]
<7>[ 0.613694] pci 0000:00:06.0: bridge window [io 0x0000-0x03af] (subtractive decode)
<7>[ 0.613696] pci 0000:00:06.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
<7>[ 0.613699] pci 0000:00:06.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
<7>[ 0.613701] pci 0000:00:06.0: bridge window [io 0x0d00-0x4fff] (subtractive decode)
<7>[ 0.613704] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[ 0.613706] pci 0000:00:06.0: bridge window [mem 0xb0000000-0xc7ffffff] (subtractive decode)
<7>[ 0.613747] pci 0000:02:00.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.613758] pci 0000:02:00.0: reg 10: [mem 0xb8200000-0xb821ffff]
<7>[ 0.613813] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
<7>[ 0.613816] pci 0000:02:00.0: PME# disabled
<6>[ 0.614933] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<7>[ 0.614940] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
<7>[ 0.614944] pci 0000:00:0a.0: bridge window [mem 0xb8200000-0xb84fffff]
<7>[ 0.615018] pci 0000:03:01.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.615018] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
<7>[ 0.615018] pci 0000:03:01.0: PME# disabled
<7>[ 0.615018] pci 0000:03:05.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.615081] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
<7>[ 0.615085] pci 0000:03:05.0: PME# disabled
<7>[ 0.615112] pci 0000:03:07.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.615175] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
<7>[ 0.615179] pci 0000:03:07.0: PME# disabled
<7>[ 0.615207] pci 0000:03:09.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.615270] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
<7>[ 0.615273] pci 0000:03:09.0: PME# disabled
<6>[ 0.615308] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<7>[ 0.615313] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
<7>[ 0.615317] pci 0000:02:00.0: bridge window [mem 0xb8300000-0xb84fffff]
<7>[ 0.615378] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
<7>[ 0.615399] pci 0000:04:00.0: reg 10: [mem 0xb8300000-0xb8301fff 64bit]
<7>[ 0.615500] pci 0000:04:00.0: PME# supported from D0 D3hot
<7>[ 0.615505] pci 0000:04:00.0: PME# disabled
<6>[ 0.616939] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<7>[ 0.616951] pci 0000:03:01.0: bridge window [mem 0xb8300000-0xb83fffff]
<7>[ 0.617038] pci 0000:05:00.0: [1b4b:9120] type 0 class 0x000106
<7>[ 0.617055] pci 0000:05:00.0: reg 10: [io 0x3020-0x3027]
<7>[ 0.617065] pci 0000:05:00.0: reg 14: [io 0x3014-0x3017]
<7>[ 0.617074] pci 0000:05:00.0: reg 18: [io 0x3018-0x301f]
<7>[ 0.617084] pci 0000:05:00.0: reg 1c: [io 0x3010-0x3013]
<7>[ 0.617094] pci 0000:05:00.0: reg 20: [io 0x3000-0x300f]
<7>[ 0.617104] pci 0000:05:00.0: reg 24: [mem 0xb8400000-0xb84007ff]
<7>[ 0.617114] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<7>[ 0.617165] pci 0000:05:00.0: PME# supported from D3hot
<7>[ 0.617170] pci 0000:05:00.0: PME# disabled
<6>[ 0.619054] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<7>[ 0.619054] pci 0000:03:05.0: bridge window [io 0x3000-0x3fff]
<7>[ 0.619054] pci 0000:03:05.0: bridge window [mem 0xb8400000-0xb84fffff]
<6>[ 0.619054] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[ 0.619054] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<7>[ 0.619096] pci 0000:08:00.0: [1033:0125] type 1 class 0x000604
<7>[ 0.619158] pci 0000:08:00.0: supports D1
<7>[ 0.619160] pci 0000:08:00.0: PME# supported from D0 D1 D3hot D3cold
<7>[ 0.619164] pci 0000:08:00.0: PME# disabled
<7>[ 0.619187] pci 0000:08:00.1: [1033:0125] type 1 class 0x000604
<7>[ 0.619206] pci 0000:08:00.1: reg 10: [mem 0xb8500000-0xb850007f 64bit]
<7>[ 0.619277] pci 0000:08:00.1: supports D1
<7>[ 0.619279] pci 0000:08:00.1: PME# supported from D0 D1 D3hot D3cold
<7>[ 0.619284] pci 0000:08:00.1: PME# disabled
<6>[ 0.619307] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
<6>[ 0.619317] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<7>[ 0.619321] pci 0000:00:0d.0: bridge window [mem 0xb8500000-0xb85fffff]
<6>[ 0.619381] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[ 0.619473] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<7>[ 0.619529] pci 0000:0b:00.0: [1002:5b63] type 0 class 0x000300
<7>[ 0.619539] pci 0000:0b:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
<7>[ 0.619547] pci 0000:0b:00.0: reg 14: [io 0x4000-0x40ff]
<7>[ 0.619554] pci 0000:0b:00.0: reg 18: [mem 0xb8600000-0xb860ffff]
<7>[ 0.619576] pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>[ 0.619607] pci 0000:0b:00.0: supports D1 D2
<7>[ 0.619640] pci 0000:0b:00.1: [1002:5b73] type 0 class 0x000380
<7>[ 0.619649] pci 0000:0b:00.1: reg 10: [mem 0xb8610000-0xb861ffff]
<7>[ 0.619702] pci 0000:0b:00.1: supports D1 D2
<6>[ 0.619713] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
<6>[ 0.619721] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<7>[ 0.619725] pci 0000:00:0f.0: bridge window [io 0x4000-0x4fff]
<7>[ 0.619728] pci 0000:00:0f.0: bridge window [mem 0xb8600000-0xb86fffff]
<7>[ 0.619732] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[ 0.619744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[ 0.619955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>[ 0.619994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
<7>[ 0.620019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<7>[ 0.620039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
<7>[ 0.620078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
<6>[ 0.620103] pci0000:00: Requesting ACPI _OSC control (0x1d)
<6>[ 0.620107] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[ 0.620109] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[ 0.637783] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
<6>[ 0.637953] pci_root PNP0A03:01: host bridge window [io 0x5000-0xffff]
<6>[ 0.637956] pci_root PNP0A03:01: host bridge window [io 0x03b0-0x03df]
<6>[ 0.637959] pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff]
<6>[ 0.637961] pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
<6>[ 0.637963] pci_root PNP0A03:01: host bridge window [mem 0xc8000000-0xcfffffff]
<6>[ 0.637969] pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[ 0.637994] pci 0000:80:00.0: [10de:0369] type 0 class 0x000500
<7>[ 0.638185] pci 0000:80:01.0: [10de:0361] type 0 class 0x000500
<7>[ 0.638193] pci 0000:80:01.0: reg 10: [io 0xfc00-0xfc7f]
<7>[ 0.638199] pci 0000:80:01.0: reg 14: [mem 0xc8000000-0xc8000fff]
<7>[ 0.638236] pci 0000:80:01.1: [10de:0368] type 0 class 0x000c05
<7>[ 0.638250] pci 0000:80:01.1: reg 10: [io 0x5000-0x503f]
<7>[ 0.638271] pci 0000:80:01.1: reg 20: [io 0x5440-0x547f]
<7>[ 0.638278] pci 0000:80:01.1: reg 24: [io 0x5400-0x543f]
<7>[ 0.638312] pci 0000:80:01.1: PME# supported from D3hot D3cold
<7>[ 0.638318] pci 0000:80:01.1: PME# disabled
<7>[ 0.638352] pci 0000:80:0a.0: [10de:0376] type 1 class 0x000604
<7>[ 0.638392] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.638395] pci 0000:80:0a.0: PME# disabled
<7>[ 0.638416] pci 0000:80:0d.0: [10de:0378] type 1 class 0x000604
<7>[ 0.638455] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.638458] pci 0000:80:0d.0: PME# disabled
<7>[ 0.638479] pci 0000:80:0f.0: [10de:0377] type 1 class 0x000604
<7>[ 0.638518] pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.638521] pci 0000:80:0f.0: PME# disabled
<6>[ 0.638573] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[ 0.638607] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[ 0.638640] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[ 0.638654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
<7>[ 0.638698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
<7>[ 0.638723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
<7>[ 0.638750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
<6>[ 0.638772] pci0000:80: Requesting ACPI _OSC control (0x1d)
<6>[ 0.638775] pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[ 0.638777] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[ 0.641613] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.641684] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.641753] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.641820] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.641891] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.641967] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.642037] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.642105] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.642172] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.642239] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.642306] ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.642373] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.642442] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.642509] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.642576] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.642644] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
<6>[ 0.642717] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
<6>[ 0.642784] ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.642856] ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.642936] ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643009] ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643080] ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643152] ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643225] ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643296] ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643367] ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643441] ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643512] ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643584] ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643660] ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.643767] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[ 0.643767] vgaarb: loaded
<6>[ 0.643767] vgaarb: bridge control possible 0000:0b:00.0
<4>[ 0.643927] i2c-core: driver [aat2870] using legacy suspend method
<4>[ 0.643929] i2c-core: driver [aat2870] using legacy resume method
<5>[ 0.644006] SCSI subsystem initialized
<7>[ 0.644044] libata version 3.00 loaded.
<6>[ 0.644044] usbcore: registered new interface driver usbfs
<6>[ 0.644044] usbcore: registered new interface driver hub
<6>[ 0.644044] usbcore: registered new device driver usb
<6>[ 0.644044] PCI: Using ACPI for IRQ routing
<7>[ 0.647094] PCI: pci_cache_line_size set to 64 bytes
<7>[ 0.647222] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
<7>[ 0.647225] reserve RAM buffer: 00000000afde0000 - 00000000afffffff
<6>[ 0.647333] NetLabel: Initializing
<6>[ 0.647335] NetLabel: domain hash size = 128
<6>[ 0.647337] NetLabel: protocols = UNLABELED CIPSOv4
<6>[ 0.647349] NetLabel: unlabeled traffic allowed by default
<6>[ 0.647369] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[ 0.647369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>[ 0.647369] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
<6>[ 0.658055] Switching to clocksource hpet
<6>[ 0.665618] AppArmor: AppArmor Filesystem Enabled
<6>[ 0.665656] pnp: PnP ACPI init
<6>[ 0.665677] ACPI: bus type pnp registered
<7>[ 0.665789] pnp 00:00: [mem 0xffc00000-0xffffffff]
<7>[ 0.665792] pnp 00:00: [mem 0xfec00000-0xfec00fff]
<7>[ 0.665794] pnp 00:00: [mem 0xfee00000-0xfeefffff]
<7>[ 0.665796] pnp 00:00: [mem 0xfed00000-0xfed00fff]
<6>[ 0.665900] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
<6>[ 0.665903] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[ 0.665906] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[ 0.665908] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
<7>[ 0.665913] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>[ 0.666032] pnp 00:01: [bus 00-7f]
<7>[ 0.666035] pnp 00:01: [io 0x0cf8-0x0cff]
<7>[ 0.666037] pnp 00:01: [io 0x0000-0x03af window]
<7>[ 0.666040] pnp 00:01: [io 0x03b0-0x03df window]
<7>[ 0.666042] pnp 00:01: [io 0x03e0-0x0cf7 window]
<7>[ 0.666044] pnp 00:01: [io 0x0d00-0x4fff window]
<7>[ 0.666046] pnp 00:01: [mem 0x000a0000-0x000bffff window]
<7>[ 0.666049] pnp 00:01: [mem 0x000c0000-0x000dffff window]
<7>[ 0.666051] pnp 00:01: [mem 0xb0000000-0xc7ffffff window]
<7>[ 0.666169] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[ 0.666268] pnp 00:02: [irq 0 disabled]
<7>[ 0.666284] pnp 00:02: [irq 8]
<7>[ 0.666286] pnp 00:02: [mem 0xfed00000-0xfed003ff]
<7>[ 0.666317] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
<7>[ 0.666351] pnp 00:03: [mem 0xb8040000-0xb8047fff]
<6>[ 0.666413] system 00:03: [mem 0xb8040000-0xb8047fff] has been reserved
<7>[ 0.666416] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.666574] pnp 00:04: [io 0x1000-0x107f]
<7>[ 0.666576] pnp 00:04: [io 0x1080-0x10ff]
<7>[ 0.666581] pnp 00:04: [io 0x1400-0x147f]
<7>[ 0.666583] pnp 00:04: [io 0x1480-0x14ff]
<7>[ 0.666585] pnp 00:04: [io 0x1800-0x187f]
<7>[ 0.666586] pnp 00:04: [io 0x1880-0x18ff]
<7>[ 0.666588] pnp 00:04: [io 0x2440-0x247f]
<7>[ 0.666590] pnp 00:04: [io 0x2400-0x243f]
<6>[ 0.666655] system 00:04: [io 0x1000-0x107f] has been reserved
<6>[ 0.666658] system 00:04: [io 0x1080-0x10ff] has been reserved
<6>[ 0.666660] system 00:04: [io 0x1400-0x147f] has been reserved
<6>[ 0.666663] system 00:04: [io 0x1480-0x14ff] has been reserved
<6>[ 0.666665] system 00:04: [io 0x1800-0x187f] has been reserved
<6>[ 0.666667] system 00:04: [io 0x1880-0x18ff] has been reserved
<6>[ 0.666670] system 00:04: [io 0x2440-0x247f] has been reserved
<6>[ 0.666673] system 00:04: [io 0x2400-0x243f] has been reserved
<7>[ 0.666676] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.666685] pnp 00:05: [io 0x0060]
<7>[ 0.666687] pnp 00:05: [io 0x0064]
<7>[ 0.666694] pnp 00:05: [irq 1]
<7>[ 0.666731] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[ 0.666746] pnp 00:06: [irq 12]
<7>[ 0.666782] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
<7>[ 0.666793] pnp 00:07: [io 0x0010-0x001f]
<7>[ 0.666795] pnp 00:07: [io 0x0022-0x003f]
<7>[ 0.666797] pnp 00:07: [io 0x0044-0x005f]
<7>[ 0.666799] pnp 00:07: [io 0x0062-0x0063]
<7>[ 0.666801] pnp 00:07: [io 0x0065-0x006f]
<7>[ 0.666802] pnp 00:07: [io 0x0072-0x0073]
<7>[ 0.666804] pnp 00:07: [io 0x0074-0x007f]
<7>[ 0.666806] pnp 00:07: [io 0x0091-0x0093]
<7>[ 0.666808] pnp 00:07: [io 0x0097-0x009f]
<7>[ 0.666810] pnp 00:07: [io 0x00a2-0x00bf]
<7>[ 0.666812] pnp 00:07: [io 0x00e0-0x00ef]
<7>[ 0.666813] pnp 00:07: [io 0x04d0-0x04d1]
<7>[ 0.666815] pnp 00:07: [io 0x0080]
<7>[ 0.666817] pnp 00:07: [io 0x0600-0x06fe]
<7>[ 0.666819] pnp 00:07: [io 0x0c05-0x0c06]
<6>[ 0.666892] system 00:07: [io 0x04d0-0x04d1] has been reserved
<6>[ 0.666895] system 00:07: [io 0x0600-0x06fe] has been reserved
<6>[ 0.666897] system 00:07: [io 0x0c05-0x0c06] has been reserved
<7>[ 0.666900] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.666914] pnp 00:08: [io 0x0000-0x0008]
<7>[ 0.666916] pnp 00:08: [io 0x000a-0x000f]
<7>[ 0.666918] pnp 00:08: [io 0x0081-0x0083]
<7>[ 0.666919] pnp 00:08: [io 0x0087]
<7>[ 0.666921] pnp 00:08: [io 0x0089-0x008b]
<7>[ 0.666923] pnp 00:08: [io 0x008f]
<7>[ 0.666925] pnp 00:08: [io 0x00c0-0x00d1]
<7>[ 0.666926] pnp 00:08: [io 0x00d4-0x00df]
<7>[ 0.666929] pnp 00:08: [dma 4]
<7>[ 0.666958] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[ 0.666966] pnp 00:09: [io 0x0061]
<7>[ 0.666999] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[ 0.667042] pnp 00:0a: [io 0x0070-0x0071]
<7>[ 0.667082] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[ 0.667091] pnp 00:0b: [io 0x00f0-0x00f1]
<7>[ 0.667098] pnp 00:0b: [irq 13]
<7>[ 0.667129] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>[ 0.667263] pnp 00:0c: [io 0x03f8-0x03ff]
<7>[ 0.667271] pnp 00:0c: [irq 4]
<7>[ 0.667338] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[ 0.667465] pnp 00:0d: [io 0x02f8-0x02ff]
<7>[ 0.667473] pnp 00:0d: [irq 3]
<7>[ 0.667534] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[ 0.667699] pnp 00:0e: [io 0x03f0-0x03f5]
<7>[ 0.667701] pnp 00:0e: [io 0x03f7]
<7>[ 0.667708] pnp 00:0e: [irq 6]
<7>[ 0.667710] pnp 00:0e: [dma 2]
<7>[ 0.667760] pnp 00:0e: Plug and Play ACPI device, IDs PNP0700 (active)
<7>[ 0.668075] pnp 00:0f: [bus 80-ff]
<7>[ 0.668077] pnp 00:0f: [io 0x0cf8-0x0cff]
<7>[ 0.668080] pnp 00:0f: [io 0x5000-0xffff window]
<7>[ 0.668082] pnp 00:0f: [io 0x03b0-0x03df window]
<7>[ 0.668084] pnp 00:0f: [mem 0x000a0000-0x000bffff window]
<7>[ 0.668086] pnp 00:0f: [mem 0x000c0000-0x000dffff window]
<7>[ 0.668089] pnp 00:0f: [mem 0xc8000000-0xcfffffff window]
<7>[ 0.668142] pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[ 0.668177] pnp 00:10: [mem 0xc8040000-0xc8047fff]
<6>[ 0.668248] system 00:10: [mem 0xc8040000-0xc8047fff] has been reserved
<7>[ 0.668251] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.668374] pnp 00:11: [io 0xf000-0xf07f]
<7>[ 0.668376] pnp 00:11: [io 0xf080-0xf0ff]
<7>[ 0.668378] pnp 00:11: [io 0xf400-0xf47f]
<7>[ 0.668380] pnp 00:11: [io 0xf480-0xf4ff]
<7>[ 0.668382] pnp 00:11: [io 0xf800-0xf87f]
<7>[ 0.668384] pnp 00:11: [io 0xf880-0xf8ff]
<6>[ 0.668458] system 00:11: [io 0xf000-0xf07f] has been reserved
<6>[ 0.668460] system 00:11: [io 0xf080-0xf0ff] has been reserved
<6>[ 0.668463] system 00:11: [io 0xf400-0xf47f] has been reserved
<6>[ 0.668465] system 00:11: [io 0xf480-0xf4ff] has been reserved
<6>[ 0.668468] system 00:11: [io 0xf800-0xf87f] has been reserved
<6>[ 0.668470] system 00:11: [io 0xf880-0xf8ff] has been reserved
<7>[ 0.668474] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[ 0.668700] pnp: PnP ACPI: found 18 devices
<6>[ 0.668702] ACPI: ACPI bus type pnp unregistered
<7>[ 0.676070] PCI: max bus depth: 3 pci_try_num: 4
<6>[ 0.676147] pci 0000:00:0a.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.676151] pci 0000:00:06.0: PCI bridge to [bus 01-01]
<6>[ 0.676155] pci 0000:00:06.0: bridge window [mem 0xb8100000-0xb81fffff]
<6>[ 0.676161] pci 0000:02:00.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.676165] pci 0000:03:05.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.676168] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<6>[ 0.676172] pci 0000:03:01.0: bridge window [mem 0xb8300000-0xb83fffff]
<6>[ 0.676180] pci 0000:05:00.0: BAR 6: assigned [mem 0xb0000000-0xb000ffff pref]
<6>[ 0.676183] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<6>[ 0.676186] pci 0000:03:05.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.676191] pci 0000:03:05.0: bridge window [mem 0xb8400000-0xb84fffff]
<6>[ 0.676195] pci 0000:03:05.0: bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.676200] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[ 0.676210] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<6>[ 0.676219] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<6>[ 0.676222] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.676227] pci 0000:02:00.0: bridge window [mem 0xb8300000-0xb84fffff]
<6>[ 0.676231] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.676236] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<6>[ 0.676239] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.676242] pci 0000:00:0a.0: bridge window [mem 0xb8200000-0xb84fffff]
<6>[ 0.676245] pci 0000:00:0a.0: bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.676249] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[ 0.676260] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<6>[ 0.676274] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<6>[ 0.676277] pci 0000:00:0d.0: bridge window [mem 0xb8500000-0xb85fffff]
<6>[ 0.676283] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb8620000-0xb863ffff pref]
<6>[ 0.676286] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<6>[ 0.676288] pci 0000:00:0f.0: bridge window [io 0x4000-0x4fff]
<6>[ 0.676292] pci 0000:00:0f.0: bridge window [mem 0xb8600000-0xb86fffff]
<6>[ 0.676295] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<6>[ 0.676300] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[ 0.676307] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[ 0.676313] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[ 0.676326] pci 0000:00:06.0: setting latency timer to 64
<7>[ 0.676331] pci 0000:00:0a.0: setting latency timer to 64
<4>[ 0.676467] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 23
<6>[ 0.676495] pci 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 23 (level, low) -> IRQ 23
<7>[ 0.676499] pci 0000:02:00.0: setting latency timer to 64
<4>[ 0.676606] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 22
<6>[ 0.676617] pci 0000:03:01.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.676621] pci 0000:03:01.0: setting latency timer to 64
<6>[ 0.676628] pci 0000:03:05.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.676632] pci 0000:03:05.0: setting latency timer to 64
<4>[ 0.676734] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 21
<6>[ 0.676747] pci 0000:03:07.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[ 0.676751] pci 0000:03:07.0: setting latency timer to 64
<6>[ 0.676757] pci 0000:03:09.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.676761] pci 0000:03:09.0: setting latency timer to 64
<7>[ 0.676766] pci 0000:00:0d.0: setting latency timer to 64
<7>[ 0.676773] pci 0000:08:00.0: setting latency timer to 64
<6>[ 0.676780] pci 0000:08:00.1: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.676785] pci 0000:08:00.1: setting latency timer to 64
<7>[ 0.676791] pci 0000:00:0f.0: setting latency timer to 64
<7>[ 0.676796] pci 0000:80:0a.0: setting latency timer to 64
<7>[ 0.676801] pci 0000:80:0d.0: setting latency timer to 64
<7>[ 0.676806] pci 0000:80:0f.0: setting latency timer to 64
<7>[ 0.676809] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
<7>[ 0.676812] pci_bus 0000:00: resource 5 [io 0x03b0-0x03df]
<7>[ 0.676814] pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7]
<7>[ 0.676816] pci_bus 0000:00: resource 7 [io 0x0d00-0x4fff]
<7>[ 0.676818] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
<7>[ 0.676821] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[ 0.676823] pci_bus 0000:01: resource 1 [mem 0xb8100000-0xb81fffff]
<7>[ 0.676826] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
<7>[ 0.676828] pci_bus 0000:01: resource 5 [io 0x03b0-0x03df]
<7>[ 0.676831] pci_bus 0000:01: resource 6 [io 0x03e0-0x0cf7]
<7>[ 0.676833] pci_bus 0000:01: resource 7 [io 0x0d00-0x4fff]
<7>[ 0.676835] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
<7>[ 0.676838] pci_bus 0000:01: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[ 0.676841] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
<7>[ 0.676843] pci_bus 0000:02: resource 1 [mem 0xb8200000-0xb84fffff]
<7>[ 0.676846] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[ 0.676849] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
<7>[ 0.676851] pci_bus 0000:03: resource 1 [mem 0xb8300000-0xb84fffff]
<7>[ 0.676853] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[ 0.676856] pci_bus 0000:04: resource 1 [mem 0xb8300000-0xb83fffff]
<7>[ 0.676859] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
<7>[ 0.676861] pci_bus 0000:05: resource 1 [mem 0xb8400000-0xb84fffff]
<7>[ 0.676863] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[ 0.676866] pci_bus 0000:08: resource 1 [mem 0xb8500000-0xb85fffff]
<7>[ 0.676869] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
<7>[ 0.676871] pci_bus 0000:0b: resource 1 [mem 0xb8600000-0xb86fffff]
<7>[ 0.676874] pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[ 0.676877] pci_bus 0000:80: resource 4 [io 0x5000-0xffff]
<7>[ 0.676879] pci_bus 0000:80: resource 5 [io 0x03b0-0x03df]
<7>[ 0.676882] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
<7>[ 0.676884] pci_bus 0000:80: resource 7 [mem 0xc8000000-0xcfffffff]
<6>[ 0.676940] NET: Registered protocol family 2
<6>[ 0.677185] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[ 0.678695] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>[ 0.682182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[ 0.682605] TCP: Hash tables configured (established 524288 bind 65536)
<6>[ 0.682607] TCP reno registered
<6>[ 0.682623] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.682697] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.682901] NET: Registered protocol family 1
<4>[ 0.683163] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
<6>[ 0.683187] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<6>[ 0.936062] pci 0000:00:02.0: PCI INT A disabled
<4>[ 0.936251] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
<6>[ 0.936275] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<6>[ 0.936325] pci 0000:00:02.1: PCI INT B disabled
<6>[ 0.936427] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.936547] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.936625] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.936709] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.936755] pci 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<6>[ 0.936795] pci 0000:04:00.0: PCI INT A disabled
<7>[ 0.936809] pci 0000:0b:00.0: Boot video device
<6>[ 0.936897] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[ 0.936952] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[ 0.937033] pci 0000:80:00.0: Found enabled HT MSI Mapping
<7>[ 0.937037] PCI: CLS 64 bytes, default 64
<6>[ 0.937771] PCI-DMA: Disabling AGP.
<6>[ 0.937921] PCI-DMA: aperture base @ b4000000 size 65536 KB
<6>[ 0.937923] init_memory_mapping: 00000000b4000000-00000000b8000000
<7>[ 0.937927] 00b4000000 - 00b8000000 page 2M
<6>[ 0.937933] PCI-DMA: using GART IOMMU.
<6>[ 0.937937] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
<6>[ 0.942642] Simple Boot Flag at 0x37 set to 0x80
<6>[ 0.943287] IBS: LVT offset 1 assigned
<6>[ 0.943313] perf: AMD IBS detected (0x00000007)
<6>[ 0.943513] audit: initializing netlink socket (disabled)
<5>[ 0.943527] type=2000 audit(1367144656.942:1): initialized
<6>[ 0.961511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[ 0.964640] VFS: Disk quotas dquot_6.5.2
<4>[ 0.964701] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 0.965286] fuse init (API version 7.17)
<6>[ 0.965385] msgmni has been set to 16047
<6>[ 0.965911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.965953] io scheduler noop registered
<6>[ 0.965955] io scheduler deadline registered
<6>[ 0.965990] io scheduler cfq registered (default)
<7>[ 0.966184] pcieport 0000:00:0a.0: setting latency timer to 64
<7>[ 0.966222] pcieport 0000:00:0a.0: irq 64 for MSI/MSI-X
<7>[ 0.966269] pcieport 0000:00:0d.0: setting latency timer to 64
<7>[ 0.966302] pcieport 0000:00:0d.0: irq 65 for MSI/MSI-X
<7>[ 0.966349] pcieport 0000:00:0f.0: setting latency timer to 64
<7>[ 0.966374] pcieport 0000:00:0f.0: irq 66 for MSI/MSI-X
<7>[ 0.966420] pcieport 0000:02:00.0: setting latency timer to 64
<7>[ 0.966456] pcieport 0000:02:00.0: irq 67 for MSI/MSI-X
<7>[ 0.966522] pcieport 0000:03:01.0: setting latency timer to 64
<7>[ 0.966560] pcieport 0000:03:01.0: irq 68 for MSI/MSI-X
<7>[ 0.966619] pcieport 0000:03:05.0: setting latency timer to 64
<7>[ 0.966655] pcieport 0000:03:05.0: irq 69 for MSI/MSI-X
<7>[ 0.966715] pcieport 0000:03:07.0: setting latency timer to 64
<7>[ 0.966752] pcieport 0000:03:07.0: irq 70 for MSI/MSI-X
<7>[ 0.966814] pcieport 0000:03:09.0: setting latency timer to 64
<7>[ 0.966851] pcieport 0000:03:09.0: irq 71 for MSI/MSI-X
<7>[ 0.966943] pcieport 0000:80:0a.0: setting latency timer to 64
<7>[ 0.966998] pcieport 0000:80:0a.0: irq 72 for MSI/MSI-X
<7>[ 0.967142] pcieport 0000:80:0d.0: setting latency timer to 64
<7>[ 0.967167] pcieport 0000:80:0d.0: irq 73 for MSI/MSI-X
<7>[ 0.967237] pcieport 0000:80:0f.0: setting latency timer to 64
<7>[ 0.967264] pcieport 0000:80:0f.0: irq 74 for MSI/MSI-X
<6>[ 0.967347] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[ 0.967367] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[ 0.967539] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
<6>[ 0.967545] ACPI: Power Button [PWRB]
<6>[ 0.967602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[ 0.967606] ACPI: Power Button [PWRF]
<6>[ 0.969537] ERST: Table is not found!
<6>[ 0.969539] GHES: HEST is not enabled!
<6>[ 0.969622] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 0.990192] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 1.019575] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 1.216193] Freeing initrd memory: 21460k freed
<6>[ 1.410766] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 1.439677] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 1.448419] Linux agpgart interface v0.103
<6>[ 1.450126] brd: module loaded
<6>[ 1.451017] loop: module loaded
<7>[ 1.451227] ahci 0000:05:00.0: version 3.0
<6>[ 1.451243] ahci 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 1.451345] ahci 0000:05:00.0: irq 75 for MSI/MSI-X
<6>[ 1.451408] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[ 1.451413] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
<7>[ 1.451418] ahci 0000:05:00.0: setting latency timer to 64
<6>[ 1.451829] scsi0 : ahci
<6>[ 1.451935] scsi1 : ahci
<6>[ 1.451980] ata1: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400100 irq 75
<6>[ 1.451984] ata2: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400180 irq 75
<7>[ 1.452132] pata_acpi 0000:00:04.0: setting latency timer to 64
<4>[ 1.452329] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
<6>[ 1.452351] pata_acpi 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<7>[ 1.452374] pata_acpi 0000:00:05.0: setting latency timer to 64
<6>[ 1.452380] pata_acpi 0000:00:05.0: PCI INT A disabled
<4>[ 1.452536] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 17
<6>[ 1.452547] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<7>[ 1.452559] pata_acpi 0000:00:05.1: setting latency timer to 64
<6>[ 1.452565] pata_acpi 0000:00:05.1: PCI INT B disabled
<4>[ 1.452716] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 16
<6>[ 1.452728] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<7>[ 1.452740] pata_acpi 0000:00:05.2: setting latency timer to 64
<6>[ 1.452750] pata_acpi 0000:00:05.2: PCI INT C disabled
<6>[ 1.453141] Fixed MDIO Bus: probed
<6>[ 1.453159] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.453161] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.453218] PPP generic driver version 2.4.2
<6>[ 1.453334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.453354] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<7>[ 1.453367] ehci_hcd 0000:00:02.1: setting latency timer to 64
<6>[ 1.453370] ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>[ 1.453445] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>[ 1.453470] ehci_hcd 0000:00:02.1: debug port 1
<7>[ 1.453477] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
<6>[ 1.453530] ehci_hcd 0000:00:02.1: irq 19, io mem 0xb8005000
<6>[ 1.459025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
<6>[ 1.459205] hub 1-0:1.0: USB hub found
<6>[ 1.459210] hub 1-0:1.0: 10 ports detected
<6>[ 1.459337] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.459358] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<7>[ 1.459369] ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>[ 1.459374] ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>[ 1.459422] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>[ 1.459477] ohci_hcd 0000:00:02.0: irq 20, io mem 0xb8004000
<6>[ 1.512168] hub 2-0:1.0: USB hub found
<6>[ 1.512173] hub 2-0:1.0: 10 ports detected
<6>[ 1.512282] uhci_hcd: USB Universal Host Controller Interface driver
<6>[ 1.512328] xhci_hcd 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 1.512341] xhci_hcd 0000:04:00.0: setting latency timer to 64
<6>[ 1.512359] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[ 1.512416] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
<6>[ 1.512628] xhci_hcd 0000:04:00.0: irq 22, io mem 0xb8300000
<7>[ 1.512752] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
<7>[ 1.512760] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
<7>[ 1.512766] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
<7>[ 1.512773] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
<7>[ 1.512779] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
<7>[ 1.512785] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
<7>[ 1.512789] xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
<7>[ 1.512793] xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
<7>[ 1.513308] xHCI xhci_add_endpoint called for root hub
<7>[ 1.513310] xHCI xhci_check_bandwidth called for root hub
<6>[ 1.513334] hub 3-0:1.0: USB hub found
<6>[ 1.513341] hub 3-0:1.0: 2 ports detected
<6>[ 1.513410] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[ 1.513454] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
<7>[ 1.515982] xHCI xhci_add_endpoint called for root hub
<7>[ 1.515984] xHCI xhci_check_bandwidth called for root hub
<6>[ 1.516025] hub 4-0:1.0: USB hub found
<6>[ 1.516031] hub 4-0:1.0: 2 ports detected
<6>[ 1.538075] usbcore: registered new interface driver libusual
<6>[ 1.538126] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>[ 1.541156] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 1.541235] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[ 1.541422] mousedev: PS/2 mouse device common for all mice
<6>[ 1.541616] rtc_cmos 00:0a: RTC can wake from S4
<6>[ 1.541795] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
<6>[ 1.541870] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
<6>[ 1.541984] device-mapper: uevent: version 1.0.3
<6>[ 1.542086] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[ 1.542098] cpuidle: using governor ladder
<6>[ 1.542100] cpuidle: using governor menu
<6>[ 1.542102] EFI Variables Facility v0.08 2004-May-17
<6>[ 1.542483] TCP cubic registered
<6>[ 1.542597] NET: Registered protocol family 10
<6>[ 1.543183] NET: Registered protocol family 17
<5>[ 1.543190] Registering the dns_resolver key type
<7>[ 1.543341] PM: Hibernation image not present or could not be loaded.
<6>[ 1.543357] registered taskstats version 1
<6>[ 1.552487] Magic number: 9:525:427
<6>[ 1.552688] rtc_cmos 00:0a: setting system clock to 2013-04-28 10:24:18 UTC (1367144658)
<6>[ 1.552722] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2356 (8 cpu cores) (version 2.20.00)
<6>[ 1.552772] powernow-k8: 0 : pstate 0 (2300 MHz)
<6>[ 1.552774] powernow-k8: 1 : pstate 1 (2000 MHz)
<6>[ 1.552776] powernow-k8: 2 : pstate 2 (1700 MHz)
<6>[ 1.552777] powernow-k8: 3 : pstate 3 (1400 MHz)
<6>[ 1.552779] powernow-k8: 4 : pstate 4 (1150 MHz)
<6>[ 1.553179] powernow-k8: 0 : pstate 0 (2300 MHz)
<6>[ 1.553181] powernow-k8: 1 : pstate 1 (2000 MHz)
<6>[ 1.553183] powernow-k8: 2 : pstate 2 (1700 MHz)
<6>[ 1.553185] powernow-k8: 3 : pstate 3 (1400 MHz)
<6>[ 1.553186] powernow-k8: 4 : pstate 4 (1150 MHz)
<6>[ 1.553599] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>[ 1.553602] EDD information not available.
<6>[ 1.562150] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
<6>[ 1.757064] ata2: SATA link down (SStatus 0 SControl 330)
<6>[ 1.812060] usb 1-7: new high-speed USB device number 3 using ehci_hcd
<6>[ 1.912051] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[ 1.924081] ata1.00: ATA-8: KINGSTON SVP200S37A60G, 502ABBF0, max UDMA/133
<6>[ 1.924085] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[ 1.934078] ata1.00: configured for UDMA/133
<5>[ 1.934263] scsi 0:0:0:0: Direct-Access ATA KINGSTON SVP200S 502A PQ: 0 ANSI: 5
<5>[ 1.934427] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 1.934497] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
<5>[ 1.934720] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.934725] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.934773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.935505] sda: sda1 sda4
<5>[ 1.935942] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 1.937438] Freeing unused kernel memory: 868k freed
<6>[ 1.937745] Write protecting the kernel read-only data: 12288k
<6>[ 1.943115] Freeing unused kernel memory: 1540k freed
<6>[ 1.944060] Refined TSC clocksource calibration: 2299.999 MHz.
<6>[ 1.944065] Switching to clocksource tsc
<6>[ 1.947769] Freeing unused kernel memory: 1212k freed
<30>[ 1.969870] udevd[138]: starting version 175
<7>[ 1.990471] pata_amd 0000:00:04.0: version 0.4.1
<7>[ 1.990530] pata_amd 0000:00:04.0: setting latency timer to 64
<6>[ 1.992227] scsi2 : pata_amd
<6>[ 1.992309] scsi3 : pata_amd
<6>[ 1.992726] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
<6>[ 1.992729] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
<7>[ 1.992837] sata_nv 0000:00:05.0: version 3.5
<6>[ 1.992852] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<5>[ 1.992856] sata_nv 0000:00:05.0: Using SWNCQ mode
<7>[ 1.993121] sata_nv 0000:00:05.0: setting latency timer to 64
<6>[ 1.994824] scsi4 : sata_nv
<6>[ 1.995713] scsi5 : sata_nv
<6>[ 1.995881] ata5: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 18
<6>[ 1.995885] ata6: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 18
<6>[ 1.995960] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<5>[ 1.995965] sata_nv 0000:00:05.1: Using SWNCQ mode
<7>[ 1.996201] sata_nv 0000:00:05.1: setting latency timer to 64
<6>[ 1.997487] scsi6 : sata_nv
<6>[ 1.998293] scsi7 : sata_nv
<6>[ 1.998477] ata7: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 17
<6>[ 1.998480] ata8: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 17
<6>[ 1.998553] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<5>[ 1.998557] sata_nv 0000:00:05.2: Using SWNCQ mode
<7>[ 1.998775] sata_nv 0000:00:05.2: setting latency timer to 64
<6>[ 1.999940] scsi8 : sata_nv
<6>[ 2.001281] scsi9 : sata_nv
<6>[ 2.001475] ata9: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 16
<6>[ 2.001479] ata10: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 16
<6>[ 2.009276] Floppy drive(s): fd0 is 1.44M
<6>[ 2.020333] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
<4>[ 2.020550] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
<6>[ 2.020557] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
<7>[ 2.020563] forcedeth 0000:00:08.0: setting latency timer to 64
<6>[ 2.024144] FDC 0 is a post-1991 82077
<6>[ 2.146357] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
<7>[ 2.146371] ata3: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
<6>[ 2.152239] ata3.00: configured for UDMA/33
<5>[ 2.158832] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5
<4>[ 2.165236] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[ 2.165240] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[ 2.165377] sr 2:0:0:0: Attached scsi CD-ROM sr0
<5>[ 2.165470] sr 2:0:0:0: Attached scsi generic sg1 type 5
<7>[ 2.165608] ata4: port disabled--ignoring
<6>[ 2.298034] ata5: SATA link down (SStatus 0 SControl 300)
<6>[ 2.453037] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.456361] ata7.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 2.456365] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 2.457035] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.460077] ata7.00: configured for UDMA/133
<6>[ 2.460909] ata9.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 2.460913] ata9.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 2.464906] ata9.00: configured for UDMA/133
<6>[ 2.543800] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:b1:66:70
<6>[ 2.543806] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<4>[ 2.544052] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 22
<6>[ 2.544057] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 22 (level, low) -> IRQ 22
<7>[ 2.544063] forcedeth 0000:00:09.0: setting latency timer to 64
<6>[ 2.560030] usb 2-5: new low-speed USB device number 2 using ohci_hcd
<6>[ 2.752038] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.755708] ata6.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 2.755712] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 2.758697] ata6.00: configured for UDMA/133
<5>[ 2.758818] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[ 2.758996] sd 5:0:0:0: Attached scsi generic sg2 type 0
<5>[ 2.759014] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 2.759152] sd 5:0:0:0: [sdb] Write Protect is off
<7>[ 2.759157] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[ 2.759178] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[ 2.759197] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[ 2.759364] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 2.759399] sd 6:0:0:0: Attached scsi generic sg3 type 0
<5>[ 2.759442] sd 6:0:0:0: [sdc] Write Protect is off
<7>[ 2.759446] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
<5>[ 2.759505] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 2.774946] sdb: sdb1
<5>[ 2.775260] sd 5:0:0:0: [sdb] Attached SCSI disk
<6>[ 2.781479] sdc: sdc1
<5>[ 2.781794] sd 6:0:0:0: [sdc] Attached SCSI disk
<6>[ 2.913823] md: bind<sdc1>
<6>[ 3.019033] usb 2-8: new full-speed USB device number 3 using ohci_hcd
<6>[ 3.065752] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b1:66:71
<6>[ 3.065756] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<6>[ 3.213041] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 3.216441] ata8.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 3.216446] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 3.217112] hub 2-8:1.0: USB hub found
<6>[ 3.219439] ata8.00: configured for UDMA/133
<5>[ 3.219573] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[ 3.219759] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 3.219783] sd 7:0:0:0: Attached scsi generic sg4 type 0
<5>[ 3.219817] sd 7:0:0:0: [sdd] Write Protect is off
<7>[ 3.219820] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
<5>[ 3.219881] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[ 3.219986] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<6>[ 3.220065] hub 2-8:1.0: 4 ports detected
<5>[ 3.220140] sd 8:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 3.220195] sd 8:0:0:0: [sde] Write Protect is off
<7>[ 3.220198] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
<5>[ 3.220212] sd 8:0:0:0: Attached scsi generic sg5 type 0
<5>[ 3.220236] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 3.238133] sdd: sdd1
<5>[ 3.238444] sd 7:0:0:0: [sdd] Attached SCSI disk
<6>[ 3.239274] sde: sde1
<5>[ 3.239583] sd 8:0:0:0: [sde] Attached SCSI disk
<6>[ 3.361854] md: bind<sdd1>
<6>[ 3.364389] md: bind<sde1>
<6>[ 3.500037] usb 2-9: new low-speed USB device number 4 using ohci_hcd
<6>[ 3.523035] ata10: SATA link down (SStatus 0 SControl 300)
<4>[ 3.525598] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 21
<6>[ 3.525605] firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 21 (level, low) -> IRQ 21
<6>[ 3.526899] [drm] Initialized drm 1.1.0 20060810
<6>[ 3.534463] [drm] radeon defaulting to kernel modesetting.
<6>[ 3.534467] [drm] radeon kernel modesetting enabled.
<6>[ 3.534586] radeon 0000:0b:00.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[ 3.534592] radeon 0000:0b:00.0: setting latency timer to 64
<6>[ 3.534800] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63 0x0001:0x0001).
<6>[ 3.534826] [drm] register mmio base: 0xB8600000
<6>[ 3.534828] [drm] register mmio size: 65536
<6>[ 3.534967] [drm] Generation 2 PCI interface, using max accessible memory
<6>[ 3.534972] radeon 0000:0b:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
<6>[ 3.534975] radeon 0000:0b:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
<6>[ 3.534982] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
<6>[ 3.534984] [drm] Driver supports precise vblank timestamp query.
<7>[ 3.535035] radeon 0000:0b:00.0: irq 84 for MSI/MSI-X
<6>[ 3.535041] radeon 0000:0b:00.0: radeon: using MSI.
<6>[ 3.535117] [drm] radeon: irq initialized.
<6>[ 3.539170] [drm] Detected VRAM RAM=128M, BAR=128M
<6>[ 3.539176] [drm] RAM width 64bits DDR
<6>[ 3.539288] [TTM] Zone kernel: Available graphics memory: 4120810 kiB.
<6>[ 3.539291] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
<6>[ 3.539293] [TTM] Initializing pool allocator.
<6>[ 3.539329] [drm] radeon: 128M of VRAM memory ready
<6>[ 3.539331] [drm] radeon: 512M of GTT memory ready.
<6>[ 3.539354] [drm] GART: num cpu pages 131072, num gpu pages 131072
<6>[ 3.539510] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
<6>[ 3.539665] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-5/input0
<6>[ 3.539693] usbcore: registered new interface driver usbhid
<6>[ 3.539696] usbhid: USB HID core driver
<6>[ 3.540301] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
<6>[ 3.541236] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
<6>[ 3.541269] radeon 0000:0b:00.0: WB enabled
<6>[ 3.541348] [drm] Loading R300 Microcode
<6>[ 3.543307] [drm] radeon: ring at 0x00000000A0001000
<6>[ 3.543327] [drm] ring test succeeded in 1 usecs
<6>[ 3.543429] [drm] radeon: ib pool ready.
<6>[ 3.543492] [drm] ib test succeeded in 0 usecs
<6>[ 3.543736] [drm] Radeon Display Connectors
<6>[ 3.543738] [drm] Connector 0:
<6>[ 3.543739] [drm] VGA
<6>[ 3.543742] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
<6>[ 3.543743] [drm] Encoders:
<6>[ 3.543745] [drm] CRT1: INTERNAL_DAC1
<6>[ 3.543746] [drm] Connector 1:
<6>[ 3.543747] [drm] DVI-I
<6>[ 3.543749] [drm] HPD1
<6>[ 3.543750] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
<6>[ 3.543752] [drm] Encoders:
<6>[ 3.543753] [drm] CRT2: INTERNAL_DAC2
<6>[ 3.543755] [drm] DFP1: INTERNAL_TMDS1
<6>[ 3.543756] [drm] Connector 2:
<6>[ 3.543758] [drm] S-video
<6>[ 3.543759] [drm] Encoders:
<6>[ 3.543760] [drm] TV1: INTERNAL_DAC2
<5>[ 3.576107] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
<6>[ 3.608125] md: bind<sdb1>
<6>[ 3.610874] async_tx: api initialized (async)
<6>[ 3.622869] [drm] fb mappable at 0xC00C0000
<6>[ 3.622871] [drm] vram apper at 0xC0000000
<6>[ 3.622873] [drm] size 8294400
<6>[ 3.622874] [drm] fb depth is 24
<6>[ 3.622875] [drm] pitch is 7680
<6>[ 3.622945] fbcon: radeondrmfb (fb0) is primary device
<6>[ 3.623036] Console: switching to colour frame buffer device 240x67
<6>[ 3.623076] fb0: radeondrmfb frame buffer device
<6>[ 3.623078] drm: registered panic notifier
<6>[ 3.623084] [drm] Initialized radeon 2.12.0 20080528 for 0000:0b:00.0 on minor 0
<4>[ 3.628063] raid6: int64x1 1964 MB/s
<4>[ 3.645040] raid6: int64x2 2808 MB/s
<4>[ 3.662073] raid6: int64x4 1996 MB/s
<4>[ 3.679037] raid6: int64x8 1781 MB/s
<4>[ 3.696018] raid6: sse2x1 3332 MB/s
<4>[ 3.713042] raid6: sse2x2 5410 MB/s
<4>[ 3.730035] raid6: sse2x4 6164 MB/s
<4>[ 3.730037] raid6: using algorithm sse2x4 (6164 MB/s)
<6>[ 3.730640] xor: automatically using best checksumming function: generic_sse
<6>[ 3.735007] generic_sse: 8988.000 MB/sec
<6>[ 3.735009] xor: using function: generic_sse (8988.000 MB/sec)
<6>[ 3.735924] md: raid6 personality registered for level 6
<6>[ 3.735927] md: raid5 personality registered for level 5
<6>[ 3.735929] md: raid4 personality registered for level 4
<6>[ 3.736120] bio: create slab <bio-1> at 1
<6>[ 3.736139] md/raid:md1: device sdb1 operational as raid disk 0
<6>[ 3.736142] md/raid:md1: device sde1 operational as raid disk 3
<6>[ 3.736144] md/raid:md1: device sdd1 operational as raid disk 2
<6>[ 3.736147] md/raid:md1: device sdc1 operational as raid disk 1
<6>[ 3.736508] md/raid:md1: allocated 4280kB
<6>[ 3.736547] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
<7>[ 3.736549] RAID conf printout:
<7>[ 3.736550] --- level:5 rd:4 wd:4
<7>[ 3.736552] disk 0, o:1, dev:sdb1
<7>[ 3.736554] disk 1, o:1, dev:sdc1
<7>[ 3.736556] disk 2, o:1, dev:sdd1
<7>[ 3.736557] disk 3, o:1, dev:sde1
<6>[ 3.736588] md1: detected capacity change from 0 to 1500317024256
<6>[ 3.738380] md1: unknown partition table
<6>[ 3.749336] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4
<6>[ 3.749434] generic-usb 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input0
<6>[ 3.760522] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input5
<6>[ 3.760696] generic-usb 0003:062A:0102.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input1
<5>[ 4.123178] firewire_core: created device fw0: GUID 00e0810000283c52, S400
<6>[ 4.926571] md: linear personality registered for level -1
<6>[ 4.928441] md: multipath personality registered for level -4
<6>[ 4.930259] md: raid0 personality registered for level 0
<6>[ 4.932507] md: raid1 personality registered for level 1
<6>[ 4.939851] md: raid10 personality registered for level 10
<6>[ 5.060462] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 5.314227] Adding 8283024k swap on /dev/sda4. Priority:-1 extents:1 across:8283024k SS
<6>[ 5.483956] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
<4>[ 5.541955] init: portmap-wait (statd) main process (703) killed by TERM signal
<4>[ 5.554483] init: statd-mounting main process (696) killed by TERM signal
<6>[ 5.563394] RPC: Registered named UNIX socket transport module.
<6>[ 5.563398] RPC: Registered udp transport module.
<6>[ 5.563400] RPC: Registered tcp transport module.
<6>[ 5.563401] RPC: Registered tcp NFSv4.1 backchannel transport module.
<5>[ 5.565049] FS-Cache: Loaded
<5>[ 5.569772] FS-Cache: Netfs 'nfs' registered for caching
<6>[ 5.813415] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 6.353747] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 6.353756] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[ 6.362658] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>[ 6.373622] init: flush-early-job-log main process (758) terminated with status 1
<6>[ 6.391585] Bluetooth: Core ver 2.16
<6>[ 6.391609] NET: Registered protocol family 31
<6>[ 6.391612] Bluetooth: HCI device and connection manager initialized
<6>[ 6.391616] Bluetooth: HCI socket layer initialized
<6>[ 6.391617] Bluetooth: L2CAP socket layer initialized
<6>[ 6.391624] Bluetooth: SCO socket layer initialized
<6>[ 6.393605] Bluetooth: RFCOMM TTY layer initialized
<6>[ 6.393612] Bluetooth: RFCOMM socket layer initialized
<6>[ 6.393614] Bluetooth: RFCOMM ver 1.11
<30>[ 6.501512] udevd[787]: starting version 175
<6>[ 6.510304] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 6.510309] Bluetooth: BNEP filters: protocol multicast
<6>[ 6.511983] lp: driver loaded but no devices found
<6>[ 6.518527] ppdev: user-space parallel port driver
<5>[ 6.539136] type=1400 audit(1367144663.485:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=815 comm="apparmor_parser"
<5>[ 6.539755] type=1400 audit(1367144663.485:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=815 comm="apparmor_parser"
<6>[ 6.549037] i2c i2c-3: nForce2 SMBus adapter at 0x2440
<6>[ 6.549070] i2c i2c-4: nForce2 SMBus adapter at 0x2400
<6>[ 6.550935] i2c i2c-5: nForce2 SMBus adapter at 0x5440
<6>[ 6.550968] i2c i2c-6: nForce2 SMBus adapter at 0x5400
<6>[ 6.552032] NV_TCO: NV TCO WatchDog Timer Driver v0.01
<6>[ 6.552143] NV_TCO: Watchdog reboot not detected.
<6>[ 6.552222] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
<6>[ 6.641195] Linux video capture interface: v2.00
<6>[ 6.641844] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
<5>[ 6.644856] type=1400 audit(1367144663.590:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1048 comm="apparmor_parser"
<5>[ 6.645412] type=1400 audit(1367144663.591:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1048 comm="apparmor_parser"
<5>[ 6.645709] type=1400 audit(1367144663.591:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1048 comm="apparmor_parser"
<6>[ 6.656092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 6.656277] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7:1.0/input/input6
<6>[ 6.656412] usbcore: registered new interface driver uvcvideo
<6>[ 6.656415] USB Video Class driver (1.1.1)
<6>[ 6.675227] MCE: In-kernel MCE decoding enabled.
<6>[ 6.676437] EDAC MC: Ver: 2.1.0
<6>[ 6.677147] AMD64 EDAC driver v3.4.0
<6>[ 6.677200] EDAC amd64: DRAM ECC enabled.
<6>[ 6.677211] EDAC amd64: F10h detected (node 0).
<7>[ 6.677245] EDAC MC: DCT0 chip selects:
<6>[ 6.677247] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.677249] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.677251] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.677253] EDAC amd64: MC: 6: 0MB 7: 0MB
<7>[ 6.677254] EDAC MC: DCT1 chip selects:
<6>[ 6.677256] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.677258] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.677259] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.677261] EDAC amd64: MC: 6: 0MB 7: 0MB
<6>[ 6.677263] EDAC amd64: using x4 syndromes.
<6>[ 6.677265] EDAC amd64: MCT channel count: 2
<6>[ 6.677304] EDAC amd64: CS0: Registered DDR2 RAM
<6>[ 6.677307] EDAC amd64: CS2: Registered DDR2 RAM
<6>[ 6.677357] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
<6>[ 6.677419] EDAC amd64: DRAM ECC enabled.
<6>[ 6.677434] EDAC amd64: F10h detected (node 1).
<7>[ 6.677471] EDAC MC: DCT0 chip selects:
<6>[ 6.677474] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.677476] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.677478] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.677479] EDAC amd64: MC: 6: 0MB 7: 0MB
<7>[ 6.677481] EDAC MC: DCT1 chip selects:
<6>[ 6.677483] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.677484] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.677486] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.677488] EDAC amd64: MC: 6: 0MB 7: 0MB
<6>[ 6.677490] EDAC amd64: using x4 syndromes.
<6>[ 6.677491] EDAC amd64: MCT channel count: 2
<6>[ 6.677545] EDAC amd64: CS0: Registered DDR2 RAM
<6>[ 6.677547] EDAC amd64: CS2: Registered DDR2 RAM
<6>[ 6.679395] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
<3>[ 6.679795] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
<3>[ 6.679920] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
<6>[ 6.682540] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
<4>[ 6.701465] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
<6>[ 6.701474] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
<6>[ 6.701478] hda_intel: Disabling MSI
<7>[ 6.701592] snd_hda_intel 0000:00:06.1: setting latency timer to 64
<4>[ 6.786526] init: failsafe main process (1262) killed by TERM signal
<5>[ 6.870348] type=1400 audit(1367144663.816:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1361 comm="apparmor_parser"
<5>[ 6.871097] type=1400 audit(1367144663.817:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1362 comm="apparmor_parser"
<5>[ 6.871219] type=1400 audit(1367144663.817:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=1368 comm="apparmor_parser"
<5>[ 6.871660] type=1400 audit(1367144663.817:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1362 comm="apparmor_parser"
<5>[ 6.871888] type=1400 audit(1367144663.817:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=1368 comm="apparmor_parser"
<7>[ 6.899550] forcedeth 0000:00:08.0: irq 85 for MSI/MSI-X
<6>[ 6.899794] forcedeth 0000:00:08.0: eth0: no link during initialization
<6>[ 6.901495] ADDRCONF(NETDEV_UP): eth0: link is not ready
<7>[ 6.905162] forcedeth 0000:00:09.0: irq 86 for MSI/MSI-X
<6>[ 6.921946] hda_codec: ALC262: SKU not ready 0x411111f0
<4>[ 6.991541] init: alsa-restore main process (1441) terminated with status 19
<6>[ 7.011302] kvm: Nested Virtualization enabled
<6>[ 7.011311] kvm: Nested Paging enabled
<6>[ 7.052155] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
<6>[ 7.052260] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
<3>[ 7.695079] 3:3:1: cannot set freq 16000 to ep 0x86
<7>[ 7.966513] vboxdrv: Found 8 processor cores.
<4>[ 7.966984] vboxdrv: fAsync=0 offMin=0x55d offMax=0x3153
<6>[ 7.967123] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
<7>[ 7.967126] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
<6>[ 7.981379] vboxpci: IOMMU not found (not registered)
<4>[ 8.565545] init: plymouth-stop pre-start process (2708) terminated with status 1
<3>[ 8.695082] 3:3:2: cannot set freq 24000 to ep 0x86
<3>[ 9.695216] 3:3:3: cannot set freq 32000 to ep 0x86
<3>[ 10.695078] 3:3:4: cannot set freq 48000 to ep 0x86
<6>[ 10.695983] usbcore: registered new interface driver snd-usb-audio
ludovic@Super-Ordinateur:~$ #33 Le 28/04/2013, à 12:38
- swapof
Re : demarrage en 25 sec
pour moi démarrage en 6.84 s,pas de trou comme vous,mais j'ai un truc qui me trouble.
0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8092464k/9175040k available (7006k kernel code, 787416k a
bsent, 295160k reserved, 6238k data, 992k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, N
odes=1" IOMMU " quelqu'un peux déchiffrer ? j'ai recherché,et,j'ai crus comprendre un rapport avec la virtualisation !?
1er ligne : Votre BIOS ne laisse pas un trou de mémoire ouverture (google traduction)
Dernière modification par swapof (Le 28/04/2013, à 12:49)
#34 Le 28/04/2013, à 13:06
- F50
Re : demarrage en 25 sec
L_d_v_c@ a écrit :
Merci faucon50 pour le lien
De rien. Celui de IPv6, c'est ça?
@swapof: Si tu n'as pas l'option IOMMU dans le BIOS, met l'option iommu=noaperture dans grub:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash iommu=noaperture"
Dernière modification par faucon50 (Le 28/04/2013, à 13:07)
#35 Le 28/04/2013, à 13:15
- swapof
Re : demarrage en 25 sec
merci, mais cela va me donner quoi ?
#36 Le 28/04/2013, à 13:16
- Compte supprimé
Re : demarrage en 25 sec
Et bien merci pour tout faucon50, encore deux secondes de gagnées.
ludovic@Super-Ordinateur:~$ dmesg -r
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.2.0-40-lowlatency (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP PREEMPT Wed Apr 3 18:26:22 UTC 2013 (Ubuntu 3.2.0-40.43-lowlatency 3.2.40)
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash iommu=noaperture vt.handoff=7
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<6>[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000afde0000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000afde0000 - 00000000afdea000 (ACPI data)
<6>[ 0.000000] BIOS-e820: 00000000afdea000 - 00000000afdeb000 (ACPI NVS)
<6>[ 0.000000] BIOS-e820: 00000000afdeb000 - 00000000b0000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000b4000000 - 00000000b8000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000250000000 (usable)
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] SMBIOS 2.4 present.
<7>[ 0.000000] DMI: Tyan Computer Corporation MCP55 /S2915 , BIOS 4.01d.2915 05/25/2010
<7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] last_pfn = 0x250000 max_arch_pfn = 0x400000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-BFFFF uncachable
<7>[ 0.000000] C0000-D3FFF write-protect
<7>[ 0.000000] D4000-E3FFF uncachable
<7>[ 0.000000] E4000-FFFFF write-protect
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
<7>[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
<7>[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
<7>[ 0.000000] 3 disabled
<7>[ 0.000000] 4 disabled
<7>[ 0.000000] 5 disabled
<7>[ 0.000000] 6 disabled
<7>[ 0.000000] 7 disabled
<7>[ 0.000000] TOM2: 0000000250000000 aka 9472M
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
<6>[ 0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000
<6>[ 0.000000] found SMP MP-table at [ffff8800000f7940] f7940
<7>[ 0.000000] initial memory mapped : 0 - 20000000
<7>[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
<6>[ 0.000000] Using GB pages for direct mapping
<6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000afde0000
<7>[ 0.000000] 0000000000 - 0080000000 page 1G
<7>[ 0.000000] 0080000000 - 00afc00000 page 2M
<7>[ 0.000000] 00afc00000 - 00afde0000 page 4k
<7>[ 0.000000] kernel direct mapping tables up to afde0000 @ 1fffd000-20000000
<6>[ 0.000000] init_memory_mapping: 0000000100000000-0000000250000000
<7>[ 0.000000] 0100000000 - 0240000000 page 1G
<7>[ 0.000000] 0240000000 - 0250000000 page 2M
<7>[ 0.000000] kernel direct mapping tables up to 250000000 @ afdde000-afde0000
<6>[ 0.000000] RAMDISK: 35606000 - 36afb000
<4>[ 0.000000] ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
<4>[ 0.000000] ACPI: XSDT 00000000afde2a70 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: FACP 00000000afde87c2 000F4 (v03 NVIDIA CK8S 06040000 PTL_ 000F4240)
<4>[ 0.000000] ACPI: DSDT 00000000afde2ad4 05C7A (v01 NVIDIA CK8 06040000 MSFT 03000000)
<4>[ 0.000000] ACPI: FACS 00000000afdeafc0 00040
<4>[ 0.000000] ACPI: SRAT 00000000afde88b6 00150 (v01 AMD FAM_F_10 06040000 AMD 00000001)
<4>[ 0.000000] ACPI: SSDT 00000000afde8a06 0143C (v01 AMD POWERNOW 06040000 AMD 00000001)
<4>[ 0.000000] ACPI: SPCR 00000000afde9e42 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
<4>[ 0.000000] ACPI: MCFG 00000000afde9e92 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: HPET 00000000afde9ece 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
<4>[ 0.000000] ACPI: APIC 00000000afde9f06 000D2 (v01 PTLTD ? APIC 06040000 LTP 00000000)
<4>[ 0.000000] ACPI: BOOT 00000000afde9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
<6>[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
<6>[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
<6>[ 0.000000] SRAT: Node 0 PXM 0 100000-b0000000
<6>[ 0.000000] SRAT: Node 0 PXM 0 100000000-150000000
<6>[ 0.000000] SRAT: Node 1 PXM 1 150000000-250000000
<6>[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,b0000000) -> [0,b0000000)
<6>[ 0.000000] NUMA: Node 0 [0,b0000000) + [100000000,150000000) -> [0,150000000)
<6>[ 0.000000] Initmem setup node 0 0000000000000000-0000000150000000
<6>[ 0.000000] NODE_DATA [000000014fffb000 - 000000014fffffff]
<6>[ 0.000000] Initmem setup node 1 0000000150000000-0000000250000000
<6>[ 0.000000] NODE_DATA [000000024fffb000 - 000000024fffffff]
<7>[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014be00000-ffff88014fdfffff] on node 0
<7>[ 0.000000] [ffffea0005400000-ffffea00093fffff] PMD -> [ffff88024b600000-ffff88024f5fffff] on node 1
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000010 -> 0x00001000
<4>[ 0.000000] DMA32 0x00001000 -> 0x00100000
<4>[ 0.000000] Normal 0x00100000 -> 0x00250000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[4] active PFN ranges
<4>[ 0.000000] 0: 0x00000010 -> 0x0000009b
<4>[ 0.000000] 0: 0x00000100 -> 0x000afde0
<4>[ 0.000000] 0: 0x00100000 -> 0x00150000
<4>[ 0.000000] 1: 0x00150000 -> 0x00250000
<7>[ 0.000000] On node 0 totalpages: 1047915
<7>[ 0.000000] DMA zone: 64 pages used for memmap
<7>[ 0.000000] DMA zone: 5 pages reserved
<7>[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
<7>[ 0.000000] DMA32 zone: 16320 pages used for memmap
<7>[ 0.000000] DMA32 zone: 699936 pages, LIFO batch:31
<7>[ 0.000000] Normal zone: 5120 pages used for memmap
<7>[ 0.000000] Normal zone: 322560 pages, LIFO batch:31
<7>[ 0.000000] On node 1 totalpages: 1048576
<7>[ 0.000000] Normal zone: 16384 pages used for memmap
<7>[ 0.000000] Normal zone: 1032192 pages, LIFO batch:31
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
<6>[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xc8000000] gsi_base[24])
<6>[ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xc8000000, GSI 24-47
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>[ 0.000000] nr_irqs_gsi: 64
<6>[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
<6>[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
<6>[ 0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afdea000
<6>[ 0.000000] PM: Registered nosave memory: 00000000afdea000 - 00000000afdeb000
<6>[ 0.000000] PM: Registered nosave memory: 00000000afdeb000 - 00000000b0000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000e0000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
<6>[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
<6>[ 0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
<6>[ 0.000000] Booting paravirtualized kernel on bare hardware
<6>[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:2
<6>[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014bc00000 s83328 r8192 d23168 u524288
<7>[ 0.000000] pcpu-alloc: s83328 r8192 d23168 u524288 alloc=1*2097152
<7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
<4>[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2058598
<4>[ 0.000000] Policy zone: Normal
<5>[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash iommu=noaperture vt.handoff=7
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<7>[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
<7>[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>[ 0.000000] Memory: 8150584k/9699328k available (6632k kernel code, 1313364k absent, 235380k reserved, 6576k data, 868k init)
<6>[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:16640 nr_irqs:1152 16
<6>[ 0.000000] Extended CMOS year: 2000
<7>[ 0.000000] spurious 8259A interrupt: IRQ7.
<6>[ 0.000000] vt handoff: transparent VT on vt#7
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] console [tty0] enabled
<6>[ 0.000000] allocated 67108864 bytes of page_cgroup
<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>[ 0.000000] hpet clockevent registered
<4>[ 0.000000] Fast TSC calibration using PIT
<4>[ 0.000000] Detected 2299.919 MHz processor.
<6>[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.83 BogoMIPS (lpj=2299919)
<6>[ 0.001010] pid_max: default: 32768 minimum: 301
<6>[ 0.001054] Security Framework initialized
<6>[ 0.001070] AppArmor: AppArmor initialized
<6>[ 0.001072] Yama: becoming mindful.
<6>[ 0.002481] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[ 0.006185] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[ 0.007767] Mount-cache hash table entries: 256
<6>[ 0.007952] Initializing cgroup subsys cpuacct
<6>[ 0.007959] Initializing cgroup subsys memory
<6>[ 0.007987] Initializing cgroup subsys devices
<6>[ 0.007989] Initializing cgroup subsys freezer
<6>[ 0.008002] Initializing cgroup subsys blkio
<6>[ 0.008010] Initializing cgroup subsys perf_event
<7>[ 0.008046] tseg: 00afe00000
<6>[ 0.008049] CPU: Physical Processor ID: 0
<6>[ 0.008050] CPU: Processor Core ID: 0
<6>[ 0.008053] mce: CPU supports 6 MCE banks
<6>[ 0.008064] using AMD E400 aware idle routine
<6>[ 0.008825] ACPI: Core revision 20110623
<6>[ 0.012011] ftrace: allocating 26511 entries in 104 pages
<6>[ 0.015840] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.025863] CPU0: Quad-Core AMD Opteron(tm) Processor 2356 stepping 03
<6>[ 0.025998] Performance Events: AMD PMU driver.
<6>[ 0.025998] ... version: 0
<6>[ 0.025998] ... bit width: 48
<6>[ 0.025998] ... generic registers: 4
<6>[ 0.025998] ... value mask: 0000ffffffffffff
<6>[ 0.025998] ... max period: 00007fffffffffff
<6>[ 0.025998] ... fixed-purpose events: 0
<6>[ 0.025998] ... event mask: 000000000000000f
<6>[ 0.031084] NMI watchdog enabled, takes one hw-pmu counter.
<6>[ 0.039014] Booting Node 0, Processors #1
<7>[ 0.039017] smpboot cpu 1: start_ip = 96000
<6>[ 0.111016] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.117010] #2
<7>[ 0.117012] smpboot cpu 2: start_ip = 96000
<6>[ 0.189001] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.194995] #3
<7>[ 0.194997] smpboot cpu 3: start_ip = 96000
<6>[ 0.266990] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.272989] Ok.
<6>[ 0.272990] Booting Node 1, Processors #4
<7>[ 0.272992] smpboot cpu 4: start_ip = 96000
<6>[ 0.344982] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.350975] #5
<7>[ 0.350977] smpboot cpu 5: start_ip = 96000
<6>[ 0.422970] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.428967] #6
<7>[ 0.428969] smpboot cpu 6: start_ip = 96000
<6>[ 0.500959] NMI watchdog enabled, takes one hw-pmu counter.
<4>[ 0.506950] #7 Ok.
<7>[ 0.506951] smpboot cpu 7: start_ip = 96000
<6>[ 0.578946] NMI watchdog enabled, takes one hw-pmu counter.
<6>[ 0.580925] Brought up 8 CPUs
<6>[ 0.580928] Total of 8 processors activated (36812.62 BogoMIPS).
<6>[ 0.582980] devtmpfs: initialized
<6>[ 0.584386] EVM: security.selinux
<6>[ 0.584388] EVM: security.SMACK64
<6>[ 0.584389] EVM: security.capability
<6>[ 0.584422] PM: Registering ACPI NVS region at afdea000 (4096 bytes)
<6>[ 0.585684] print_constraints: dummy:
<6>[ 0.585733] RTC time: 11:10:45, date: 04/28/13
<6>[ 0.585779] NET: Registered protocol family 16
<7>[ 0.585904] node 0 link 2: io port [1000, 4fff]
<7>[ 0.585907] node 1 link 0: io port [5000, 5fff]
<7>[ 0.585909] node 1 link 0: io port [f000, ffff]
<6>[ 0.585911] TOM: 00000000b0000000 aka 2816M
<7>[ 0.585915] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
<7>[ 0.585918] node 0 link 2: mmio [b8000000, c7ffffff]
<7>[ 0.585927] node 1 link 0: mmio [c8000000, cfffffff]
<7>[ 0.585931] node 0 link 2: mmio [a0000, bffff]
<7>[ 0.585933] node 0 link 2: mmio [e0000000, e7ffffff] ==> none
<7>[ 0.585936] node 1 link 0: mmio [e8000000, efffffff] ==> none
<6>[ 0.585939] TOM2: 0000000250000000 aka 9472M
<7>[ 0.585941] bus: [00, 7f] on node 0 link 2
<7>[ 0.585943] bus: 00 index 0 [io 0x0000-0x4fff]
<7>[ 0.585945] bus: 00 index 1 [io 0x6000-0xefff]
<7>[ 0.585947] bus: 00 index 2 [mem 0xb0000000-0xc7ffffff]
<7>[ 0.585949] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
<7>[ 0.585951] bus: 00 index 4 [mem 0xf0000000-0xffffffff]
<7>[ 0.585953] bus: 00 index 5 [mem 0xd0000000-0xdfffffff]
<7>[ 0.585955] bus: 00 index 6 [mem 0x250000000-0xfcffffffff]
<7>[ 0.585957] bus: [80, ff] on node 1 link 0
<7>[ 0.585958] bus: 80 index 0 [io 0x5000-0x5fff]
<7>[ 0.585960] bus: 80 index 1 [io 0xf000-0xffff]
<7>[ 0.585962] bus: 80 index 2 [mem 0xc8000000-0xcfffffff]
<6>[ 0.585792] Trying to unpack rootfs image as initramfs...
<6>[ 0.585973] Extended Config Space enabled on 2 nodes
<6>[ 0.586011] ACPI: bus type pci registered
<6>[ 0.586086] PCI: MMCONFIG for domain 0000 [bus 00-82] at [mem 0xe0000000-0xe82fffff] (base 0xe0000000)
<6>[ 0.586089] PCI: MMCONFIG at [mem 0xe0000000-0xe82fffff] reserved in E820
<6>[ 0.598401] PCI: Using configuration type 1 for base access
<6>[ 0.599455] bio: create slab <bio-0> at 0
<6>[ 0.599455] ACPI: Added _OSI(Module Device)
<6>[ 0.599455] ACPI: Added _OSI(Processor Device)
<6>[ 0.599455] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.599455] ACPI: Added _OSI(Processor Aggregator Device)
<7>[ 0.600695] ACPI: EC: Look up EC in DSDT
<6>[ 0.604288] ACPI: Interpreter enabled
<6>[ 0.604293] ACPI: (supports S0 S1 S3 S4 S5)
<6>[ 0.604317] ACPI: Using IOAPIC for interrupt routing
<6>[ 0.610449] ACPI: No dock devices found.
<6>[ 0.610451] HEST: Table not found.
<6>[ 0.610456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 0.610578] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
<6>[ 0.610785] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
<6>[ 0.610788] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
<6>[ 0.610790] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
<6>[ 0.610792] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x4fff]
<6>[ 0.610795] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[ 0.610797] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
<6>[ 0.610799] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xc7ffffff]
<6>[ 0.610806] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[ 0.610834] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
<7>[ 0.611033] pci 0000:00:01.0: [10de:0364] type 0 class 0x000601
<7>[ 0.611041] pci 0000:00:01.0: reg 10: [io 0x1c00-0x1c7f]
<7>[ 0.611079] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
<7>[ 0.611092] pci 0000:00:01.1: reg 10: [io 0x2000-0x203f]
<7>[ 0.611114] pci 0000:00:01.1: reg 20: [io 0x2440-0x247f]
<7>[ 0.611120] pci 0000:00:01.1: reg 24: [io 0x2400-0x243f]
<7>[ 0.611154] pci 0000:00:01.1: PME# supported from D3hot D3cold
<7>[ 0.611160] pci 0000:00:01.1: PME# disabled
<7>[ 0.611182] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
<7>[ 0.611191] pci 0000:00:02.0: reg 10: [mem 0xb8004000-0xb8004fff]
<7>[ 0.611232] pci 0000:00:02.0: supports D1 D2
<7>[ 0.611234] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.611237] pci 0000:00:02.0: PME# disabled
<7>[ 0.611249] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
<7>[ 0.611259] pci 0000:00:02.1: reg 10: [mem 0xb8005000-0xb80050ff]
<7>[ 0.611302] pci 0000:00:02.1: supports D1 D2
<7>[ 0.611304] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.611307] pci 0000:00:02.1: PME# disabled
<7>[ 0.611324] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
<7>[ 0.611345] pci 0000:00:04.0: reg 20: [io 0x2480-0x248f]
<7>[ 0.611374] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
<7>[ 0.611384] pci 0000:00:05.0: reg 10: [io 0x24d0-0x24d7]
<7>[ 0.611390] pci 0000:00:05.0: reg 14: [io 0x24c4-0x24c7]
<7>[ 0.611395] pci 0000:00:05.0: reg 18: [io 0x24c8-0x24cf]
<7>[ 0.611400] pci 0000:00:05.0: reg 1c: [io 0x24c0-0x24c3]
<7>[ 0.611405] pci 0000:00:05.0: reg 20: [io 0x2490-0x249f]
<7>[ 0.611410] pci 0000:00:05.0: reg 24: [mem 0xb8006000-0xb8006fff]
<7>[ 0.611446] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
<7>[ 0.611456] pci 0000:00:05.1: reg 10: [io 0x24e8-0x24ef]
<7>[ 0.611461] pci 0000:00:05.1: reg 14: [io 0x24dc-0x24df]
<7>[ 0.611467] pci 0000:00:05.1: reg 18: [io 0x24e0-0x24e7]
<7>[ 0.611472] pci 0000:00:05.1: reg 1c: [io 0x24d8-0x24db]
<7>[ 0.611477] pci 0000:00:05.1: reg 20: [io 0x24a0-0x24af]
<7>[ 0.611482] pci 0000:00:05.1: reg 24: [mem 0xb8007000-0xb8007fff]
<7>[ 0.611518] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
<7>[ 0.611528] pci 0000:00:05.2: reg 10: [io 0x2800-0x2807]
<7>[ 0.611533] pci 0000:00:05.2: reg 14: [io 0x24f4-0x24f7]
<7>[ 0.611538] pci 0000:00:05.2: reg 18: [io 0x24f8-0x24ff]
<7>[ 0.611543] pci 0000:00:05.2: reg 1c: [io 0x24f0-0x24f3]
<7>[ 0.611548] pci 0000:00:05.2: reg 20: [io 0x24b0-0x24bf]
<7>[ 0.611554] pci 0000:00:05.2: reg 24: [mem 0xb8008000-0xb8008fff]
<7>[ 0.611592] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
<7>[ 0.611631] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
<7>[ 0.611642] pci 0000:00:06.1: reg 10: [mem 0xb8000000-0xb8003fff]
<7>[ 0.611687] pci 0000:00:06.1: PME# supported from D3hot D3cold
<7>[ 0.611691] pci 0000:00:06.1: PME# disabled
<7>[ 0.611715] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
<7>[ 0.611728] pci 0000:00:08.0: reg 10: [mem 0xb8009000-0xb8009fff]
<7>[ 0.611733] pci 0000:00:08.0: reg 14: [io 0x2808-0x280f]
<7>[ 0.611739] pci 0000:00:08.0: reg 18: [mem 0xb8005800-0xb80058ff]
<7>[ 0.611744] pci 0000:00:08.0: reg 1c: [mem 0xb8005400-0xb800540f]
<7>[ 0.611782] pci 0000:00:08.0: supports D1 D2
<7>[ 0.611787] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.611791] pci 0000:00:08.0: PME# disabled
<7>[ 0.611809] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
<7>[ 0.611822] pci 0000:00:09.0: reg 10: [mem 0xb800b000-0xb800bfff]
<7>[ 0.611827] pci 0000:00:09.0: reg 14: [io 0x2810-0x2817]
<7>[ 0.611832] pci 0000:00:09.0: reg 18: [mem 0xb800a000-0xb800a0ff]
<7>[ 0.611838] pci 0000:00:09.0: reg 1c: [mem 0xb8005c00-0xb8005c0f]
<7>[ 0.611876] pci 0000:00:09.0: supports D1 D2
<7>[ 0.611878] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.611882] pci 0000:00:09.0: PME# disabled
<7>[ 0.611899] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
<7>[ 0.611943] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.611946] pci 0000:00:0a.0: PME# disabled
<7>[ 0.611965] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
<7>[ 0.612000] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.612003] pci 0000:00:0d.0: PME# disabled
<7>[ 0.612020] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
<7>[ 0.612056] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.612059] pci 0000:00:0f.0: PME# disabled
<7>[ 0.612079] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
<7>[ 0.612112] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
<7>[ 0.612132] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
<7>[ 0.612154] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
<7>[ 0.612178] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
<7>[ 0.612201] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
<7>[ 0.612236] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
<7>[ 0.612256] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
<7>[ 0.612278] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
<7>[ 0.612306] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
<7>[ 0.612357] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
<7>[ 0.612370] pci 0000:01:05.0: reg 10: [mem 0xb8104000-0xb81047ff]
<7>[ 0.612378] pci 0000:01:05.0: reg 14: [mem 0xb8100000-0xb8103fff]
<7>[ 0.612425] pci 0000:01:05.0: supports D1 D2
<7>[ 0.612427] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
<7>[ 0.612431] pci 0000:01:05.0: PME# disabled
<6>[ 0.612459] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
<7>[ 0.612464] pci 0000:00:06.0: bridge window [mem 0xb8100000-0xb81fffff]
<7>[ 0.612467] pci 0000:00:06.0: bridge window [io 0x0000-0x03af] (subtractive decode)
<7>[ 0.612470] pci 0000:00:06.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
<7>[ 0.612472] pci 0000:00:06.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
<7>[ 0.612475] pci 0000:00:06.0: bridge window [io 0x0d00-0x4fff] (subtractive decode)
<7>[ 0.612477] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[ 0.612480] pci 0000:00:06.0: bridge window [mem 0xb0000000-0xc7ffffff] (subtractive decode)
<7>[ 0.612520] pci 0000:02:00.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.612531] pci 0000:02:00.0: reg 10: [mem 0xb8200000-0xb821ffff]
<7>[ 0.612586] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
<7>[ 0.612589] pci 0000:02:00.0: PME# disabled
<6>[ 0.613933] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<7>[ 0.613940] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
<7>[ 0.613944] pci 0000:00:0a.0: bridge window [mem 0xb8200000-0xb84fffff]
<7>[ 0.614026] pci 0000:03:01.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.614026] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
<7>[ 0.614026] pci 0000:03:01.0: PME# disabled
<7>[ 0.614026] pci 0000:03:05.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.614080] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
<7>[ 0.614086] pci 0000:03:05.0: PME# disabled
<7>[ 0.614113] pci 0000:03:07.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.614176] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
<7>[ 0.614180] pci 0000:03:07.0: PME# disabled
<7>[ 0.614208] pci 0000:03:09.0: [10b5:8608] type 1 class 0x000604
<7>[ 0.614271] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
<7>[ 0.614275] pci 0000:03:09.0: PME# disabled
<6>[ 0.614309] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<7>[ 0.614314] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
<7>[ 0.614318] pci 0000:02:00.0: bridge window [mem 0xb8300000-0xb84fffff]
<7>[ 0.614379] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
<7>[ 0.614401] pci 0000:04:00.0: reg 10: [mem 0xb8300000-0xb8301fff 64bit]
<7>[ 0.614502] pci 0000:04:00.0: PME# supported from D0 D3hot
<7>[ 0.614506] pci 0000:04:00.0: PME# disabled
<6>[ 0.615939] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<7>[ 0.615950] pci 0000:03:01.0: bridge window [mem 0xb8300000-0xb83fffff]
<7>[ 0.616040] pci 0000:05:00.0: [1b4b:9120] type 0 class 0x000106
<7>[ 0.616056] pci 0000:05:00.0: reg 10: [io 0x3020-0x3027]
<7>[ 0.616066] pci 0000:05:00.0: reg 14: [io 0x3014-0x3017]
<7>[ 0.616076] pci 0000:05:00.0: reg 18: [io 0x3018-0x301f]
<7>[ 0.616085] pci 0000:05:00.0: reg 1c: [io 0x3010-0x3013]
<7>[ 0.616095] pci 0000:05:00.0: reg 20: [io 0x3000-0x300f]
<7>[ 0.616105] pci 0000:05:00.0: reg 24: [mem 0xb8400000-0xb84007ff]
<7>[ 0.616115] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<7>[ 0.616166] pci 0000:05:00.0: PME# supported from D3hot
<7>[ 0.616171] pci 0000:05:00.0: PME# disabled
<6>[ 0.618048] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<7>[ 0.618048] pci 0000:03:05.0: bridge window [io 0x3000-0x3fff]
<7>[ 0.618048] pci 0000:03:05.0: bridge window [mem 0xb8400000-0xb84fffff]
<6>[ 0.618048] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[ 0.618048] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<7>[ 0.618096] pci 0000:08:00.0: [1033:0125] type 1 class 0x000604
<7>[ 0.618158] pci 0000:08:00.0: supports D1
<7>[ 0.618160] pci 0000:08:00.0: PME# supported from D0 D1 D3hot D3cold
<7>[ 0.618164] pci 0000:08:00.0: PME# disabled
<7>[ 0.618186] pci 0000:08:00.1: [1033:0125] type 1 class 0x000604
<7>[ 0.618206] pci 0000:08:00.1: reg 10: [mem 0xb8500000-0xb850007f 64bit]
<7>[ 0.618277] pci 0000:08:00.1: supports D1
<7>[ 0.618279] pci 0000:08:00.1: PME# supported from D0 D1 D3hot D3cold
<7>[ 0.618283] pci 0000:08:00.1: PME# disabled
<6>[ 0.618307] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
<6>[ 0.618316] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<7>[ 0.618321] pci 0000:00:0d.0: bridge window [mem 0xb8500000-0xb85fffff]
<6>[ 0.618381] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[ 0.618473] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<7>[ 0.618529] pci 0000:0b:00.0: [1002:5b63] type 0 class 0x000300
<7>[ 0.618539] pci 0000:0b:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
<7>[ 0.618546] pci 0000:0b:00.0: reg 14: [io 0x4000-0x40ff]
<7>[ 0.618553] pci 0000:0b:00.0: reg 18: [mem 0xb8600000-0xb860ffff]
<7>[ 0.618575] pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>[ 0.618607] pci 0000:0b:00.0: supports D1 D2
<7>[ 0.618625] pci 0000:0b:00.1: [1002:5b73] type 0 class 0x000380
<7>[ 0.618634] pci 0000:0b:00.1: reg 10: [mem 0xb8610000-0xb861ffff]
<7>[ 0.618687] pci 0000:0b:00.1: supports D1 D2
<6>[ 0.618699] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
<6>[ 0.618707] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<7>[ 0.618710] pci 0000:00:0f.0: bridge window [io 0x4000-0x4fff]
<7>[ 0.618713] pci 0000:00:0f.0: bridge window [mem 0xb8600000-0xb86fffff]
<7>[ 0.618717] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[ 0.618729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[ 0.618933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>[ 0.618969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
<7>[ 0.618993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<7>[ 0.619016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
<7>[ 0.619051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
<6>[ 0.619076] pci0000:00: Requesting ACPI _OSC control (0x1d)
<6>[ 0.619080] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[ 0.619082] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[ 0.633363] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
<6>[ 0.633523] pci_root PNP0A03:01: host bridge window [io 0x5000-0xffff]
<6>[ 0.633526] pci_root PNP0A03:01: host bridge window [io 0x03b0-0x03df]
<6>[ 0.633528] pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff]
<6>[ 0.633531] pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
<6>[ 0.633533] pci_root PNP0A03:01: host bridge window [mem 0xc8000000-0xcfffffff]
<6>[ 0.633539] pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[ 0.633563] pci 0000:80:00.0: [10de:0369] type 0 class 0x000500
<7>[ 0.633753] pci 0000:80:01.0: [10de:0361] type 0 class 0x000500
<7>[ 0.633761] pci 0000:80:01.0: reg 10: [io 0xfc00-0xfc7f]
<7>[ 0.633767] pci 0000:80:01.0: reg 14: [mem 0xc8000000-0xc8000fff]
<7>[ 0.633805] pci 0000:80:01.1: [10de:0368] type 0 class 0x000c05
<7>[ 0.633818] pci 0000:80:01.1: reg 10: [io 0x5000-0x503f]
<7>[ 0.633839] pci 0000:80:01.1: reg 20: [io 0x5440-0x547f]
<7>[ 0.633846] pci 0000:80:01.1: reg 24: [io 0x5400-0x543f]
<7>[ 0.633880] pci 0000:80:01.1: PME# supported from D3hot D3cold
<7>[ 0.633886] pci 0000:80:01.1: PME# disabled
<7>[ 0.633928] pci 0000:80:0a.0: [10de:0376] type 1 class 0x000604
<7>[ 0.633968] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.633971] pci 0000:80:0a.0: PME# disabled
<7>[ 0.633992] pci 0000:80:0d.0: [10de:0378] type 1 class 0x000604
<7>[ 0.634031] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.634034] pci 0000:80:0d.0: PME# disabled
<7>[ 0.634053] pci 0000:80:0f.0: [10de:0377] type 1 class 0x000604
<7>[ 0.634092] pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[ 0.634095] pci 0000:80:0f.0: PME# disabled
<6>[ 0.634146] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[ 0.634180] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[ 0.634215] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[ 0.634229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
<7>[ 0.634271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
<7>[ 0.634295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
<7>[ 0.634321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
<6>[ 0.634342] pci0000:80: Requesting ACPI _OSC control (0x1d)
<6>[ 0.634345] pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[ 0.634346] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[ 0.636739] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.636809] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.636876] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.636958] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.637028] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.637094] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.637160] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.637227] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.637292] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.637359] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.637425] ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.637491] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.637559] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[ 0.637625] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.637691] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[ 0.637758] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
<6>[ 0.637824] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
<6>[ 0.637890] ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[ 0.637969] ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638041] ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638112] ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638183] ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638253] ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638324] ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638394] ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638465] ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638538] ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638609] ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638680] ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638757] ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[ 0.638865] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[ 0.638865] vgaarb: loaded
<6>[ 0.638865] vgaarb: bridge control possible 0000:0b:00.0
<4>[ 0.639022] i2c-core: driver [aat2870] using legacy suspend method
<4>[ 0.639024] i2c-core: driver [aat2870] using legacy resume method
<5>[ 0.639099] SCSI subsystem initialized
<7>[ 0.639129] libata version 3.00 loaded.
<6>[ 0.639129] usbcore: registered new interface driver usbfs
<6>[ 0.639129] usbcore: registered new interface driver hub
<6>[ 0.639129] usbcore: registered new device driver usb
<6>[ 0.639129] PCI: Using ACPI for IRQ routing
<7>[ 0.642135] PCI: pci_cache_line_size set to 64 bytes
<7>[ 0.642265] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
<7>[ 0.642268] reserve RAM buffer: 00000000afde0000 - 00000000afffffff
<6>[ 0.642381] NetLabel: Initializing
<6>[ 0.642383] NetLabel: domain hash size = 128
<6>[ 0.642384] NetLabel: protocols = UNLABELED CIPSOv4
<6>[ 0.642397] NetLabel: unlabeled traffic allowed by default
<6>[ 0.642416] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[ 0.642416] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>[ 0.642416] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
<6>[ 0.652059] Switching to clocksource hpet
<6>[ 0.659512] AppArmor: AppArmor Filesystem Enabled
<6>[ 0.659556] pnp: PnP ACPI init
<6>[ 0.659578] ACPI: bus type pnp registered
<7>[ 0.659687] pnp 00:00: [mem 0xffc00000-0xffffffff]
<7>[ 0.659690] pnp 00:00: [mem 0xfec00000-0xfec00fff]
<7>[ 0.659692] pnp 00:00: [mem 0xfee00000-0xfeefffff]
<7>[ 0.659694] pnp 00:00: [mem 0xfed00000-0xfed00fff]
<6>[ 0.659807] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
<6>[ 0.659810] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[ 0.659813] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[ 0.659816] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
<7>[ 0.659820] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>[ 0.659920] pnp 00:01: [bus 00-7f]
<7>[ 0.659923] pnp 00:01: [io 0x0cf8-0x0cff]
<7>[ 0.659925] pnp 00:01: [io 0x0000-0x03af window]
<7>[ 0.659927] pnp 00:01: [io 0x03b0-0x03df window]
<7>[ 0.659929] pnp 00:01: [io 0x03e0-0x0cf7 window]
<7>[ 0.659932] pnp 00:01: [io 0x0d00-0x4fff window]
<7>[ 0.659934] pnp 00:01: [mem 0x000a0000-0x000bffff window]
<7>[ 0.659936] pnp 00:01: [mem 0x000c0000-0x000dffff window]
<7>[ 0.659938] pnp 00:01: [mem 0xb0000000-0xc7ffffff window]
<7>[ 0.660079] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[ 0.660167] pnp 00:02: [irq 0 disabled]
<7>[ 0.660182] pnp 00:02: [irq 8]
<7>[ 0.660185] pnp 00:02: [mem 0xfed00000-0xfed003ff]
<7>[ 0.660216] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
<7>[ 0.660249] pnp 00:03: [mem 0xb8040000-0xb8047fff]
<6>[ 0.660307] system 00:03: [mem 0xb8040000-0xb8047fff] has been reserved
<7>[ 0.660310] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.660466] pnp 00:04: [io 0x1000-0x107f]
<7>[ 0.660468] pnp 00:04: [io 0x1080-0x10ff]
<7>[ 0.660472] pnp 00:04: [io 0x1400-0x147f]
<7>[ 0.660474] pnp 00:04: [io 0x1480-0x14ff]
<7>[ 0.660476] pnp 00:04: [io 0x1800-0x187f]
<7>[ 0.660478] pnp 00:04: [io 0x1880-0x18ff]
<7>[ 0.660480] pnp 00:04: [io 0x2440-0x247f]
<7>[ 0.660482] pnp 00:04: [io 0x2400-0x243f]
<6>[ 0.660548] system 00:04: [io 0x1000-0x107f] has been reserved
<6>[ 0.660550] system 00:04: [io 0x1080-0x10ff] has been reserved
<6>[ 0.660553] system 00:04: [io 0x1400-0x147f] has been reserved
<6>[ 0.660555] system 00:04: [io 0x1480-0x14ff] has been reserved
<6>[ 0.660558] system 00:04: [io 0x1800-0x187f] has been reserved
<6>[ 0.660560] system 00:04: [io 0x1880-0x18ff] has been reserved
<6>[ 0.660563] system 00:04: [io 0x2440-0x247f] has been reserved
<6>[ 0.660565] system 00:04: [io 0x2400-0x243f] has been reserved
<7>[ 0.660568] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.660577] pnp 00:05: [io 0x0060]
<7>[ 0.660579] pnp 00:05: [io 0x0064]
<7>[ 0.660586] pnp 00:05: [irq 1]
<7>[ 0.660624] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[ 0.660637] pnp 00:06: [irq 12]
<7>[ 0.660674] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
<7>[ 0.660684] pnp 00:07: [io 0x0010-0x001f]
<7>[ 0.660686] pnp 00:07: [io 0x0022-0x003f]
<7>[ 0.660688] pnp 00:07: [io 0x0044-0x005f]
<7>[ 0.660690] pnp 00:07: [io 0x0062-0x0063]
<7>[ 0.660692] pnp 00:07: [io 0x0065-0x006f]
<7>[ 0.660694] pnp 00:07: [io 0x0072-0x0073]
<7>[ 0.660695] pnp 00:07: [io 0x0074-0x007f]
<7>[ 0.660697] pnp 00:07: [io 0x0091-0x0093]
<7>[ 0.660699] pnp 00:07: [io 0x0097-0x009f]
<7>[ 0.660701] pnp 00:07: [io 0x00a2-0x00bf]
<7>[ 0.660702] pnp 00:07: [io 0x00e0-0x00ef]
<7>[ 0.660704] pnp 00:07: [io 0x04d0-0x04d1]
<7>[ 0.660706] pnp 00:07: [io 0x0080]
<7>[ 0.660708] pnp 00:07: [io 0x0600-0x06fe]
<7>[ 0.660709] pnp 00:07: [io 0x0c05-0x0c06]
<6>[ 0.660786] system 00:07: [io 0x04d0-0x04d1] has been reserved
<6>[ 0.660788] system 00:07: [io 0x0600-0x06fe] has been reserved
<6>[ 0.660791] system 00:07: [io 0x0c05-0x0c06] has been reserved
<7>[ 0.660794] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.660806] pnp 00:08: [io 0x0000-0x0008]
<7>[ 0.660808] pnp 00:08: [io 0x000a-0x000f]
<7>[ 0.660810] pnp 00:08: [io 0x0081-0x0083]
<7>[ 0.660812] pnp 00:08: [io 0x0087]
<7>[ 0.660814] pnp 00:08: [io 0x0089-0x008b]
<7>[ 0.660815] pnp 00:08: [io 0x008f]
<7>[ 0.660817] pnp 00:08: [io 0x00c0-0x00d1]
<7>[ 0.660819] pnp 00:08: [io 0x00d4-0x00df]
<7>[ 0.660821] pnp 00:08: [dma 4]
<7>[ 0.660852] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[ 0.660860] pnp 00:09: [io 0x0061]
<7>[ 0.660893] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[ 0.660913] pnp 00:0a: [io 0x0070-0x0071]
<7>[ 0.660946] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[ 0.660954] pnp 00:0b: [io 0x00f0-0x00f1]
<7>[ 0.660961] pnp 00:0b: [irq 13]
<7>[ 0.660993] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>[ 0.661143] pnp 00:0c: [io 0x03f8-0x03ff]
<7>[ 0.661150] pnp 00:0c: [irq 4]
<7>[ 0.661218] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[ 0.661346] pnp 00:0d: [io 0x02f8-0x02ff]
<7>[ 0.661354] pnp 00:0d: [irq 3]
<7>[ 0.661415] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[ 0.661581] pnp 00:0e: [io 0x03f0-0x03f5]
<7>[ 0.661583] pnp 00:0e: [io 0x03f7]
<7>[ 0.661591] pnp 00:0e: [irq 6]
<7>[ 0.661593] pnp 00:0e: [dma 2]
<7>[ 0.661642] pnp 00:0e: Plug and Play ACPI device, IDs PNP0700 (active)
<7>[ 0.661923] pnp 00:0f: [bus 80-ff]
<7>[ 0.661926] pnp 00:0f: [io 0x0cf8-0x0cff]
<7>[ 0.661928] pnp 00:0f: [io 0x5000-0xffff window]
<7>[ 0.661930] pnp 00:0f: [io 0x03b0-0x03df window]
<7>[ 0.661932] pnp 00:0f: [mem 0x000a0000-0x000bffff window]
<7>[ 0.661934] pnp 00:0f: [mem 0x000c0000-0x000dffff window]
<7>[ 0.661937] pnp 00:0f: [mem 0xc8000000-0xcfffffff window]
<7>[ 0.661990] pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[ 0.662039] pnp 00:10: [mem 0xc8040000-0xc8047fff]
<6>[ 0.662112] system 00:10: [mem 0xc8040000-0xc8047fff] has been reserved
<7>[ 0.662115] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.662235] pnp 00:11: [io 0xf000-0xf07f]
<7>[ 0.662238] pnp 00:11: [io 0xf080-0xf0ff]
<7>[ 0.662240] pnp 00:11: [io 0xf400-0xf47f]
<7>[ 0.662241] pnp 00:11: [io 0xf480-0xf4ff]
<7>[ 0.662243] pnp 00:11: [io 0xf800-0xf87f]
<7>[ 0.662245] pnp 00:11: [io 0xf880-0xf8ff]
<6>[ 0.662318] system 00:11: [io 0xf000-0xf07f] has been reserved
<6>[ 0.662321] system 00:11: [io 0xf080-0xf0ff] has been reserved
<6>[ 0.662323] system 00:11: [io 0xf400-0xf47f] has been reserved
<6>[ 0.662325] system 00:11: [io 0xf480-0xf4ff] has been reserved
<6>[ 0.662328] system 00:11: [io 0xf800-0xf87f] has been reserved
<6>[ 0.662330] system 00:11: [io 0xf880-0xf8ff] has been reserved
<7>[ 0.662333] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[ 0.662542] pnp: PnP ACPI: found 18 devices
<6>[ 0.662544] ACPI: ACPI bus type pnp unregistered
<7>[ 0.669952] PCI: max bus depth: 3 pci_try_num: 4
<6>[ 0.670045] pci 0000:00:0a.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.670049] pci 0000:00:06.0: PCI bridge to [bus 01-01]
<6>[ 0.670053] pci 0000:00:06.0: bridge window [mem 0xb8100000-0xb81fffff]
<6>[ 0.670059] pci 0000:02:00.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.670063] pci 0000:03:05.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.670065] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<6>[ 0.670070] pci 0000:03:01.0: bridge window [mem 0xb8300000-0xb83fffff]
<6>[ 0.670078] pci 0000:05:00.0: BAR 6: assigned [mem 0xb0000000-0xb000ffff pref]
<6>[ 0.670081] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<6>[ 0.670084] pci 0000:03:05.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.670089] pci 0000:03:05.0: bridge window [mem 0xb8400000-0xb84fffff]
<6>[ 0.670093] pci 0000:03:05.0: bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.670098] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[ 0.670108] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<6>[ 0.670117] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<6>[ 0.670120] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.670125] pci 0000:02:00.0: bridge window [mem 0xb8300000-0xb84fffff]
<6>[ 0.670129] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.670134] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<6>[ 0.670137] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
<6>[ 0.670140] pci 0000:00:0a.0: bridge window [mem 0xb8200000-0xb84fffff]
<6>[ 0.670143] pci 0000:00:0a.0: bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[ 0.670148] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[ 0.670158] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<6>[ 0.670172] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<6>[ 0.670175] pci 0000:00:0d.0: bridge window [mem 0xb8500000-0xb85fffff]
<6>[ 0.670181] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb8620000-0xb863ffff pref]
<6>[ 0.670183] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<6>[ 0.670186] pci 0000:00:0f.0: bridge window [io 0x4000-0x4fff]
<6>[ 0.670189] pci 0000:00:0f.0: bridge window [mem 0xb8600000-0xb86fffff]
<6>[ 0.670193] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<6>[ 0.670198] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[ 0.670205] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[ 0.670211] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[ 0.670223] pci 0000:00:06.0: setting latency timer to 64
<7>[ 0.670229] pci 0000:00:0a.0: setting latency timer to 64
<4>[ 0.670365] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 23
<6>[ 0.670391] pci 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 23 (level, low) -> IRQ 23
<7>[ 0.670396] pci 0000:02:00.0: setting latency timer to 64
<4>[ 0.670509] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 22
<6>[ 0.670521] pci 0000:03:01.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.670525] pci 0000:03:01.0: setting latency timer to 64
<6>[ 0.670532] pci 0000:03:05.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.670535] pci 0000:03:05.0: setting latency timer to 64
<4>[ 0.670637] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 21
<6>[ 0.670649] pci 0000:03:07.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[ 0.670653] pci 0000:03:07.0: setting latency timer to 64
<6>[ 0.670660] pci 0000:03:09.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.670664] pci 0000:03:09.0: setting latency timer to 64
<7>[ 0.670670] pci 0000:00:0d.0: setting latency timer to 64
<7>[ 0.670677] pci 0000:08:00.0: setting latency timer to 64
<6>[ 0.670684] pci 0000:08:00.1: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 0.670689] pci 0000:08:00.1: setting latency timer to 64
<7>[ 0.670695] pci 0000:00:0f.0: setting latency timer to 64
<7>[ 0.670700] pci 0000:80:0a.0: setting latency timer to 64
<7>[ 0.670705] pci 0000:80:0d.0: setting latency timer to 64
<7>[ 0.670710] pci 0000:80:0f.0: setting latency timer to 64
<7>[ 0.670714] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
<7>[ 0.670716] pci_bus 0000:00: resource 5 [io 0x03b0-0x03df]
<7>[ 0.670718] pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7]
<7>[ 0.670721] pci_bus 0000:00: resource 7 [io 0x0d00-0x4fff]
<7>[ 0.670723] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
<7>[ 0.670725] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[ 0.670728] pci_bus 0000:01: resource 1 [mem 0xb8100000-0xb81fffff]
<7>[ 0.670731] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
<7>[ 0.670733] pci_bus 0000:01: resource 5 [io 0x03b0-0x03df]
<7>[ 0.670735] pci_bus 0000:01: resource 6 [io 0x03e0-0x0cf7]
<7>[ 0.670738] pci_bus 0000:01: resource 7 [io 0x0d00-0x4fff]
<7>[ 0.670740] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
<7>[ 0.670743] pci_bus 0000:01: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[ 0.670745] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
<7>[ 0.670748] pci_bus 0000:02: resource 1 [mem 0xb8200000-0xb84fffff]
<7>[ 0.670750] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[ 0.670753] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
<7>[ 0.670756] pci_bus 0000:03: resource 1 [mem 0xb8300000-0xb84fffff]
<7>[ 0.670758] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[ 0.670761] pci_bus 0000:04: resource 1 [mem 0xb8300000-0xb83fffff]
<7>[ 0.670763] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
<7>[ 0.670765] pci_bus 0000:05: resource 1 [mem 0xb8400000-0xb84fffff]
<7>[ 0.670768] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[ 0.670771] pci_bus 0000:08: resource 1 [mem 0xb8500000-0xb85fffff]
<7>[ 0.670774] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
<7>[ 0.670776] pci_bus 0000:0b: resource 1 [mem 0xb8600000-0xb86fffff]
<7>[ 0.670779] pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[ 0.670782] pci_bus 0000:80: resource 4 [io 0x5000-0xffff]
<7>[ 0.670784] pci_bus 0000:80: resource 5 [io 0x03b0-0x03df]
<7>[ 0.670787] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
<7>[ 0.670789] pci_bus 0000:80: resource 7 [mem 0xc8000000-0xcfffffff]
<6>[ 0.670845] NET: Registered protocol family 2
<6>[ 0.671092] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[ 0.672599] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>[ 0.676064] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[ 0.676481] TCP: Hash tables configured (established 524288 bind 65536)
<6>[ 0.676483] TCP reno registered
<6>[ 0.676501] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.676576] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.676767] NET: Registered protocol family 1
<4>[ 0.676997] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
<6>[ 0.677041] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<6>[ 0.930058] pci 0000:00:02.0: PCI INT A disabled
<4>[ 0.930252] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
<6>[ 0.930288] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<6>[ 0.930333] pci 0000:00:02.1: PCI INT B disabled
<6>[ 0.930443] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.930563] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.930641] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.930724] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[ 0.930772] pci 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<6>[ 0.930812] pci 0000:04:00.0: PCI INT A disabled
<7>[ 0.930825] pci 0000:0b:00.0: Boot video device
<6>[ 0.930914] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[ 0.930969] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[ 0.931050] pci 0000:80:00.0: Found enabled HT MSI Mapping
<7>[ 0.931053] PCI: CLS 64 bytes, default 64
<6>[ 0.931056] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 0.931059] Placing 64MB software IO TLB between ffff8800abdde000 - ffff8800afdde000
<6>[ 0.931061] software IO TLB at phys 0xabdde000 - 0xafdde000
<6>[ 0.931084] Simple Boot Flag at 0x37 set to 0x80
<6>[ 0.931711] IBS: LVT offset 1 assigned
<6>[ 0.931736] perf: AMD IBS detected (0x00000007)
<6>[ 0.931930] audit: initializing netlink socket (disabled)
<5>[ 0.931956] type=2000 audit(1367147444.930:1): initialized
<6>[ 0.949956] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[ 0.953092] VFS: Disk quotas dquot_6.5.2
<4>[ 0.953156] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 0.953725] fuse init (API version 7.17)
<6>[ 0.953823] msgmni has been set to 15919
<6>[ 0.954366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.954409] io scheduler noop registered
<6>[ 0.954411] io scheduler deadline registered
<6>[ 0.954443] io scheduler cfq registered (default)
<7>[ 0.954627] pcieport 0000:00:0a.0: setting latency timer to 64
<7>[ 0.954661] pcieport 0000:00:0a.0: irq 64 for MSI/MSI-X
<7>[ 0.954745] pcieport 0000:00:0d.0: setting latency timer to 64
<7>[ 0.954783] pcieport 0000:00:0d.0: irq 65 for MSI/MSI-X
<7>[ 0.954847] pcieport 0000:00:0f.0: setting latency timer to 64
<7>[ 0.954874] pcieport 0000:00:0f.0: irq 66 for MSI/MSI-X
<7>[ 0.954941] pcieport 0000:02:00.0: setting latency timer to 64
<7>[ 0.954977] pcieport 0000:02:00.0: irq 67 for MSI/MSI-X
<7>[ 0.955079] pcieport 0000:03:01.0: setting latency timer to 64
<7>[ 0.955118] pcieport 0000:03:01.0: irq 68 for MSI/MSI-X
<7>[ 0.955203] pcieport 0000:03:05.0: setting latency timer to 64
<7>[ 0.955239] pcieport 0000:03:05.0: irq 69 for MSI/MSI-X
<7>[ 0.955319] pcieport 0000:03:07.0: setting latency timer to 64
<7>[ 0.955357] pcieport 0000:03:07.0: irq 70 for MSI/MSI-X
<7>[ 0.955436] pcieport 0000:03:09.0: setting latency timer to 64
<7>[ 0.955472] pcieport 0000:03:09.0: irq 71 for MSI/MSI-X
<7>[ 0.955614] pcieport 0000:80:0a.0: setting latency timer to 64
<7>[ 0.955670] pcieport 0000:80:0a.0: irq 72 for MSI/MSI-X
<7>[ 0.955785] pcieport 0000:80:0d.0: setting latency timer to 64
<7>[ 0.955809] pcieport 0000:80:0d.0: irq 73 for MSI/MSI-X
<7>[ 0.955881] pcieport 0000:80:0f.0: setting latency timer to 64
<7>[ 0.955906] pcieport 0000:80:0f.0: irq 74 for MSI/MSI-X
<6>[ 0.955990] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[ 0.956038] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[ 0.956212] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
<6>[ 0.956218] ACPI: Power Button [PWRB]
<6>[ 0.956277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[ 0.956280] ACPI: Power Button [PWRF]
<6>[ 0.958194] ERST: Table is not found!
<6>[ 0.958196] GHES: HEST is not enabled!
<6>[ 0.958276] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 0.978843] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 1.007578] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 1.214882] Freeing initrd memory: 21460k freed
<6>[ 1.407752] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 1.436667] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 1.445405] Linux agpgart interface v0.103
<6>[ 1.447793] brd: module loaded
<6>[ 1.448705] loop: module loaded
<7>[ 1.448891] ahci 0000:05:00.0: version 3.0
<6>[ 1.448906] ahci 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 1.449018] ahci 0000:05:00.0: irq 75 for MSI/MSI-X
<6>[ 1.449083] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[ 1.449087] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
<7>[ 1.449092] ahci 0000:05:00.0: setting latency timer to 64
<6>[ 1.449511] scsi0 : ahci
<6>[ 1.449607] scsi1 : ahci
<6>[ 1.449653] ata1: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400100 irq 75
<6>[ 1.449656] ata2: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400180 irq 75
<7>[ 1.449794] pata_acpi 0000:00:04.0: setting latency timer to 64
<4>[ 1.449979] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
<6>[ 1.449993] pata_acpi 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<7>[ 1.450018] pata_acpi 0000:00:05.0: setting latency timer to 64
<6>[ 1.450024] pata_acpi 0000:00:05.0: PCI INT A disabled
<4>[ 1.450182] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 17
<6>[ 1.450194] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<7>[ 1.450206] pata_acpi 0000:00:05.1: setting latency timer to 64
<6>[ 1.450216] pata_acpi 0000:00:05.1: PCI INT B disabled
<4>[ 1.450365] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 16
<6>[ 1.450377] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<7>[ 1.450389] pata_acpi 0000:00:05.2: setting latency timer to 64
<6>[ 1.450397] pata_acpi 0000:00:05.2: PCI INT C disabled
<6>[ 1.450787] Fixed MDIO Bus: probed
<6>[ 1.450805] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.450807] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.450864] PPP generic driver version 2.4.2
<6>[ 1.450989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.451033] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<7>[ 1.451047] ehci_hcd 0000:00:02.1: setting latency timer to 64
<6>[ 1.451050] ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>[ 1.451116] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>[ 1.451140] ehci_hcd 0000:00:02.1: debug port 1
<7>[ 1.451145] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
<6>[ 1.451199] ehci_hcd 0000:00:02.1: irq 19, io mem 0xb8005000
<6>[ 1.457028] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
<6>[ 1.457217] hub 1-0:1.0: USB hub found
<6>[ 1.457222] hub 1-0:1.0: 10 ports detected
<6>[ 1.457347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.457372] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<7>[ 1.457384] ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>[ 1.457391] ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>[ 1.457439] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>[ 1.457498] ohci_hcd 0000:00:02.0: irq 20, io mem 0xb8004000
<6>[ 1.510148] hub 2-0:1.0: USB hub found
<6>[ 1.510154] hub 2-0:1.0: 10 ports detected
<6>[ 1.510262] uhci_hcd: USB Universal Host Controller Interface driver
<6>[ 1.510308] xhci_hcd 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[ 1.510325] xhci_hcd 0000:04:00.0: setting latency timer to 64
<6>[ 1.510338] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[ 1.510387] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
<6>[ 1.510588] xhci_hcd 0000:04:00.0: irq 22, io mem 0xb8300000
<7>[ 1.510699] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
<7>[ 1.510707] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
<7>[ 1.510713] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
<7>[ 1.510720] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
<7>[ 1.510725] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
<7>[ 1.510731] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
<7>[ 1.510735] xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
<7>[ 1.510739] xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
<7>[ 1.511249] xHCI xhci_add_endpoint called for root hub
<7>[ 1.511251] xHCI xhci_check_bandwidth called for root hub
<6>[ 1.511276] hub 3-0:1.0: USB hub found
<6>[ 1.511283] hub 3-0:1.0: 2 ports detected
<6>[ 1.511357] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[ 1.511401] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
<7>[ 1.513937] xHCI xhci_add_endpoint called for root hub
<7>[ 1.513939] xHCI xhci_check_bandwidth called for root hub
<6>[ 1.513961] hub 4-0:1.0: USB hub found
<6>[ 1.513971] hub 4-0:1.0: 2 ports detected
<6>[ 1.536076] usbcore: registered new interface driver libusual
<6>[ 1.536124] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>[ 1.539310] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 1.539389] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[ 1.539572] mousedev: PS/2 mouse device common for all mice
<6>[ 1.539762] rtc_cmos 00:0a: RTC can wake from S4
<6>[ 1.539938] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
<6>[ 1.540031] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
<6>[ 1.540140] device-mapper: uevent: version 1.0.3
<6>[ 1.540222] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[ 1.540234] cpuidle: using governor ladder
<6>[ 1.540236] cpuidle: using governor menu
<6>[ 1.540238] EFI Variables Facility v0.08 2004-May-17
<6>[ 1.540554] TCP cubic registered
<6>[ 1.540673] NET: Registered protocol family 10
<6>[ 1.541266] NET: Registered protocol family 17
<5>[ 1.541273] Registering the dns_resolver key type
<7>[ 1.541419] PM: Hibernation image not present or could not be loaded.
<6>[ 1.541434] registered taskstats version 1
<6>[ 1.550463] Magic number: 9:872:176
<6>[ 1.550550] acpi device:39: hash matches
<6>[ 1.550571] acpi device:0c: hash matches
<6>[ 1.550662] rtc_cmos 00:0a: setting system clock to 2013-04-28 11:10:46 UTC (1367147446)
<6>[ 1.550697] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2356 (8 cpu cores) (version 2.20.00)
<6>[ 1.550747] powernow-k8: 0 : pstate 0 (2300 MHz)
<6>[ 1.550749] powernow-k8: 1 : pstate 1 (2000 MHz)
<6>[ 1.550750] powernow-k8: 2 : pstate 2 (1700 MHz)
<6>[ 1.550752] powernow-k8: 3 : pstate 3 (1400 MHz)
<6>[ 1.550753] powernow-k8: 4 : pstate 4 (1150 MHz)
<6>[ 1.551143] powernow-k8: 0 : pstate 0 (2300 MHz)
<6>[ 1.551145] powernow-k8: 1 : pstate 1 (2000 MHz)
<6>[ 1.551146] powernow-k8: 2 : pstate 2 (1700 MHz)
<6>[ 1.551148] powernow-k8: 3 : pstate 3 (1400 MHz)
<6>[ 1.551150] powernow-k8: 4 : pstate 4 (1150 MHz)
<6>[ 1.551558] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>[ 1.551560] EDD information not available.
<6>[ 1.560298] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
<6>[ 1.754064] ata2: SATA link down (SStatus 0 SControl 330)
<6>[ 1.810062] usb 1-7: new high-speed USB device number 3 using ehci_hcd
<6>[ 1.909051] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[ 1.920904] ata1.00: ATA-8: KINGSTON SVP200S37A60G, 502ABBF0, max UDMA/133
<6>[ 1.920907] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[ 1.930795] ata1.00: configured for UDMA/133
<5>[ 1.930980] scsi 0:0:0:0: Direct-Access ATA KINGSTON SVP200S 502A PQ: 0 ANSI: 5
<5>[ 1.931171] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 1.931220] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
<5>[ 1.931442] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.931446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.931494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.932045] Refined TSC clocksource calibration: 2300.000 MHz.
<6>[ 1.932052] Switching to clocksource tsc
<6>[ 1.932210] sda: sda1 sda4
<5>[ 1.932576] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 1.934025] Freeing unused kernel memory: 868k freed
<6>[ 1.934322] Write protecting the kernel read-only data: 12288k
<6>[ 1.939596] Freeing unused kernel memory: 1540k freed
<6>[ 1.944203] Freeing unused kernel memory: 1212k freed
<30>[ 1.966245] udevd[138]: starting version 175
<7>[ 1.989113] pata_amd 0000:00:04.0: version 0.4.1
<7>[ 1.989164] pata_amd 0000:00:04.0: setting latency timer to 64
<6>[ 1.990649] scsi2 : pata_amd
<6>[ 1.990791] scsi3 : pata_amd
<6>[ 1.991229] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
<6>[ 1.991233] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
<7>[ 1.991287] sata_nv 0000:00:05.0: version 3.5
<6>[ 1.991305] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<5>[ 1.991309] sata_nv 0000:00:05.0: Using SWNCQ mode
<7>[ 1.991516] sata_nv 0000:00:05.0: setting latency timer to 64
<6>[ 1.996068] scsi4 : sata_nv
<6>[ 1.996230] scsi5 : sata_nv
<6>[ 1.996378] ata5: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 18
<6>[ 1.996382] ata6: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 18
<6>[ 1.996455] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<5>[ 1.996459] sata_nv 0000:00:05.1: Using SWNCQ mode
<7>[ 1.996671] sata_nv 0000:00:05.1: setting latency timer to 64
<6>[ 1.997207] scsi6 : sata_nv
<6>[ 1.997294] scsi7 : sata_nv
<6>[ 1.997424] ata7: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 17
<6>[ 1.997428] ata8: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 17
<6>[ 1.997480] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<5>[ 1.997483] sata_nv 0000:00:05.2: Using SWNCQ mode
<7>[ 1.997669] sata_nv 0000:00:05.2: setting latency timer to 64
<6>[ 1.999063] scsi8 : sata_nv
<6>[ 1.999812] Floppy drive(s): fd0 is 1.44M
<6>[ 1.999842] scsi9 : sata_nv
<6>[ 1.999995] ata9: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 16
<6>[ 1.999999] ata10: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 16
<6>[ 2.010285] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
<4>[ 2.010496] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
<6>[ 2.010503] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
<7>[ 2.010509] forcedeth 0000:00:08.0: setting latency timer to 64
<6>[ 2.013937] FDC 0 is a post-1991 82077
<6>[ 2.145355] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
<7>[ 2.145367] ata3: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
<6>[ 2.151264] ata3.00: configured for UDMA/33
<5>[ 2.157150] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5
<4>[ 2.162863] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[ 2.162866] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[ 2.163023] sr 2:0:0:0: Attached scsi CD-ROM sr0
<5>[ 2.163114] sr 2:0:0:0: Attached scsi generic sg1 type 5
<7>[ 2.163244] ata4: port disabled--ignoring
<6>[ 2.299033] ata5: SATA link down (SStatus 0 SControl 300)
<6>[ 2.451043] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.454058] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.454372] ata7.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 2.454376] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 2.457335] ata9.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 2.457340] ata9.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 2.457467] ata7.00: configured for UDMA/133
<6>[ 2.460321] ata9.00: configured for UDMA/133
<6>[ 2.533778] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:b1:66:70
<6>[ 2.533784] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<4>[ 2.534014] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 22
<6>[ 2.534020] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 22 (level, low) -> IRQ 22
<7>[ 2.534025] forcedeth 0000:00:09.0: setting latency timer to 64
<6>[ 2.557033] usb 2-5: new low-speed USB device number 2 using ohci_hcd
<6>[ 2.753042] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.756335] ata6.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 2.756339] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 2.762366] ata6.00: configured for UDMA/133
<5>[ 2.762478] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[ 2.762675] sd 5:0:0:0: Attached scsi generic sg2 type 0
<5>[ 2.762706] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 2.762869] sd 5:0:0:0: [sdb] Write Protect is off
<5>[ 2.762874] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<7>[ 2.762879] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[ 2.762920] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[ 2.763102] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 2.763149] sd 6:0:0:0: Attached scsi generic sg3 type 0
<5>[ 2.763204] sd 6:0:0:0: [sdc] Write Protect is off
<7>[ 2.763208] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
<5>[ 2.763264] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 2.772346] sdc: sdc1
<5>[ 2.772641] sd 6:0:0:0: [sdc] Attached SCSI disk
<6>[ 2.772732] sdb: sdb1
<5>[ 2.773048] sd 5:0:0:0: [sdb] Attached SCSI disk
<6>[ 2.904506] md: bind<sdc1>
<6>[ 3.018047] usb 2-8: new full-speed USB device number 3 using ohci_hcd
<6>[ 3.055807] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b1:66:71
<6>[ 3.055813] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<6>[ 3.216109] hub 2-8:1.0: USB hub found
<6>[ 3.217037] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 3.219074] hub 2-8:1.0: 4 ports detected
<6>[ 3.220680] ata8.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[ 3.220684] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 3.223333] ata8.00: configured for UDMA/133
<5>[ 3.223450] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[ 3.223611] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 3.223658] sd 7:0:0:0: Attached scsi generic sg4 type 0
<5>[ 3.223686] sd 7:0:0:0: [sdd] Write Protect is off
<7>[ 3.223689] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
<5>[ 3.223732] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[ 3.223864] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[ 3.224049] sd 8:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[ 3.224098] sd 8:0:0:0: Attached scsi generic sg5 type 0
<5>[ 3.224134] sd 8:0:0:0: [sde] Write Protect is off
<7>[ 3.224138] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
<5>[ 3.224164] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 3.234823] sde: sde1
<5>[ 3.235100] sd 8:0:0:0: [sde] Attached SCSI disk
<6>[ 3.242883] sdd: sdd1
<5>[ 3.243187] sd 7:0:0:0: [sdd] Attached SCSI disk
<6>[ 3.348560] md: bind<sde1>
<6>[ 3.366699] md: bind<sdd1>
<6>[ 3.498039] usb 2-9: new low-speed USB device number 4 using ohci_hcd
<6>[ 3.527035] ata10: SATA link down (SStatus 0 SControl 300)
<4>[ 3.529541] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 21
<6>[ 3.529548] firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 21 (level, low) -> IRQ 21
<6>[ 3.530128] [drm] Initialized drm 1.1.0 20060810
<6>[ 3.538116] [drm] radeon defaulting to kernel modesetting.
<6>[ 3.538121] [drm] radeon kernel modesetting enabled.
<6>[ 3.538234] radeon 0000:0b:00.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[ 3.538240] radeon 0000:0b:00.0: setting latency timer to 64
<6>[ 3.538473] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63 0x0001:0x0001).
<6>[ 3.538504] [drm] register mmio base: 0xB8600000
<6>[ 3.538506] [drm] register mmio size: 65536
<6>[ 3.538659] [drm] Generation 2 PCI interface, using max accessible memory
<6>[ 3.538664] radeon 0000:0b:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
<6>[ 3.538667] radeon 0000:0b:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
<6>[ 3.538675] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
<6>[ 3.538677] [drm] Driver supports precise vblank timestamp query.
<7>[ 3.538723] radeon 0000:0b:00.0: irq 84 for MSI/MSI-X
<6>[ 3.538728] radeon 0000:0b:00.0: radeon: using MSI.
<6>[ 3.538792] [drm] radeon: irq initialized.
<6>[ 3.542831] [drm] Detected VRAM RAM=128M, BAR=128M
<6>[ 3.542836] [drm] RAM width 64bits DDR
<6>[ 3.542956] [TTM] Zone kernel: Available graphics memory: 4087832 kiB.
<6>[ 3.542959] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
<6>[ 3.542961] [TTM] Initializing pool allocator.
<6>[ 3.543010] [drm] radeon: 128M of VRAM memory ready
<6>[ 3.543013] [drm] radeon: 512M of GTT memory ready.
<6>[ 3.543036] [drm] GART: num cpu pages 131072, num gpu pages 131072
<6>[ 3.543198] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
<6>[ 3.543346] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-5/input0
<6>[ 3.543374] usbcore: registered new interface driver usbhid
<6>[ 3.543376] usbhid: USB HID core driver
<6>[ 3.543952] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
<6>[ 3.544889] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
<6>[ 3.544916] radeon 0000:0b:00.0: WB enabled
<6>[ 3.544994] [drm] Loading R300 Microcode
<6>[ 3.546817] [drm] radeon: ring at 0x00000000A0001000
<6>[ 3.546837] [drm] ring test succeeded in 1 usecs
<6>[ 3.546937] [drm] radeon: ib pool ready.
<6>[ 3.546993] [drm] ib test succeeded in 0 usecs
<6>[ 3.547236] [drm] Radeon Display Connectors
<6>[ 3.547238] [drm] Connector 0:
<6>[ 3.547239] [drm] VGA
<6>[ 3.547242] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
<6>[ 3.547243] [drm] Encoders:
<6>[ 3.547245] [drm] CRT1: INTERNAL_DAC1
<6>[ 3.547247] [drm] Connector 1:
<6>[ 3.547248] [drm] DVI-I
<6>[ 3.547249] [drm] HPD1
<6>[ 3.547251] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
<6>[ 3.547253] [drm] Encoders:
<6>[ 3.547254] [drm] CRT2: INTERNAL_DAC2
<6>[ 3.547256] [drm] DFP1: INTERNAL_TMDS1
<6>[ 3.547257] [drm] Connector 2:
<6>[ 3.547258] [drm] S-video
<6>[ 3.547259] [drm] Encoders:
<6>[ 3.547261] [drm] TV1: INTERNAL_DAC2
<5>[ 3.580113] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
<6>[ 3.620614] md: bind<sdb1>
<6>[ 3.623827] async_tx: api initialized (async)
<6>[ 3.627982] [drm] fb mappable at 0xC00C0000
<6>[ 3.627985] [drm] vram apper at 0xC0000000
<6>[ 3.627987] [drm] size 8294400
<6>[ 3.627988] [drm] fb depth is 24
<6>[ 3.627989] [drm] pitch is 7680
<6>[ 3.628078] fbcon: radeondrmfb (fb0) is primary device
<6>[ 3.628160] Console: switching to colour frame buffer device 240x67
<6>[ 3.628199] fb0: radeondrmfb frame buffer device
<6>[ 3.628200] drm: registered panic notifier
<6>[ 3.628209] [drm] Initialized radeon 2.12.0 20080528 for 0000:0b:00.0 on minor 0
<4>[ 3.641079] raid6: int64x1 1941 MB/s
<4>[ 3.658036] raid6: int64x2 2796 MB/s
<4>[ 3.675033] raid6: int64x4 1992 MB/s
<4>[ 3.692067] raid6: int64x8 1789 MB/s
<4>[ 3.709037] raid6: sse2x1 3050 MB/s
<6>[ 3.718271] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4
<6>[ 3.718368] generic-usb 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input0
<4>[ 3.726024] raid6: sse2x2 5167 MB/s
<6>[ 3.728428] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input5
<6>[ 3.728586] generic-usb 0003:062A:0102.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input1
<4>[ 3.743032] raid6: sse2x4 5593 MB/s
<4>[ 3.743036] raid6: using algorithm sse2x4 (5593 MB/s)
<6>[ 3.743546] xor: automatically using best checksumming function: generic_sse
<6>[ 3.748021] generic_sse: 8696.000 MB/sec
<6>[ 3.748024] xor: using function: generic_sse (8696.000 MB/sec)
<6>[ 3.748993] md: raid6 personality registered for level 6
<6>[ 3.748995] md: raid5 personality registered for level 5
<6>[ 3.748997] md: raid4 personality registered for level 4
<6>[ 3.749192] bio: create slab <bio-1> at 1
<6>[ 3.749212] md/raid:md1: device sdb1 operational as raid disk 0
<6>[ 3.749214] md/raid:md1: device sdd1 operational as raid disk 2
<6>[ 3.749217] md/raid:md1: device sde1 operational as raid disk 3
<6>[ 3.749219] md/raid:md1: device sdc1 operational as raid disk 1
<6>[ 3.749580] md/raid:md1: allocated 4280kB
<6>[ 3.749621] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
<7>[ 3.749623] RAID conf printout:
<7>[ 3.749625] --- level:5 rd:4 wd:4
<7>[ 3.749627] disk 0, o:1, dev:sdb1
<7>[ 3.749628] disk 1, o:1, dev:sdc1
<7>[ 3.749630] disk 2, o:1, dev:sdd1
<7>[ 3.749631] disk 3, o:1, dev:sde1
<6>[ 3.749664] md1: detected capacity change from 0 to 1500317024256
<6>[ 3.751772] md1: unknown partition table
<5>[ 4.129176] firewire_core: created device fw0: GUID 00e0810000283c52, S400
<6>[ 4.903538] md: linear personality registered for level -1
<6>[ 4.905443] md: multipath personality registered for level -4
<6>[ 4.907227] md: raid0 personality registered for level 0
<6>[ 4.909433] md: raid1 personality registered for level 1
<6>[ 4.916841] md: raid10 personality registered for level 10
<6>[ 5.036552] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 5.303507] Adding 8283024k swap on /dev/sda4. Priority:-1 extents:1 across:8283024k SS
<6>[ 5.409237] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
<4>[ 5.485037] init: portmap-wait (statd) main process (678) killed by TERM signal
<4>[ 5.497866] init: statd-mounting main process (664) killed by TERM signal
<6>[ 5.505436] RPC: Registered named UNIX socket transport module.
<6>[ 5.505440] RPC: Registered udp transport module.
<6>[ 5.505441] RPC: Registered tcp transport module.
<6>[ 5.505443] RPC: Registered tcp NFSv4.1 backchannel transport module.
<5>[ 5.507105] FS-Cache: Loaded
<5>[ 5.512063] FS-Cache: Netfs 'nfs' registered for caching
<6>[ 5.756856] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 6.421611] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 6.421619] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[ 6.430879] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>[ 6.439349] init: flush-early-job-log main process (731) terminated with status 1
<6>[ 6.459330] Bluetooth: Core ver 2.16
<6>[ 6.459354] NET: Registered protocol family 31
<6>[ 6.459356] Bluetooth: HCI device and connection manager initialized
<6>[ 6.459360] Bluetooth: HCI socket layer initialized
<6>[ 6.459362] Bluetooth: L2CAP socket layer initialized
<6>[ 6.459368] Bluetooth: SCO socket layer initialized
<6>[ 6.461398] Bluetooth: RFCOMM TTY layer initialized
<6>[ 6.461406] Bluetooth: RFCOMM socket layer initialized
<6>[ 6.461408] Bluetooth: RFCOMM ver 1.11
<30>[ 6.537482] udevd[762]: starting version 175
<6>[ 6.547014] lp: driver loaded but no devices found
<6>[ 6.551489] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 6.551494] Bluetooth: BNEP filters: protocol multicast
<6>[ 6.553213] ppdev: user-space parallel port driver
<5>[ 6.575823] type=1400 audit(1367147451.523:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=795 comm="apparmor_parser"
<5>[ 6.576455] type=1400 audit(1367147451.524:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=795 comm="apparmor_parser"
<6>[ 6.615479] i2c i2c-3: nForce2 SMBus adapter at 0x2440
<6>[ 6.615511] i2c i2c-4: nForce2 SMBus adapter at 0x2400
<6>[ 6.615652] i2c i2c-5: nForce2 SMBus adapter at 0x5440
<6>[ 6.615685] i2c i2c-6: nForce2 SMBus adapter at 0x5400
<6>[ 6.615989] NV_TCO: NV TCO WatchDog Timer Driver v0.01
<6>[ 6.616121] NV_TCO: Watchdog reboot not detected.
<6>[ 6.616209] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
<5>[ 6.642150] type=1400 audit(1367147451.590:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=924 comm="apparmor_parser"
<5>[ 6.642662] type=1400 audit(1367147451.590:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=924 comm="apparmor_parser"
<5>[ 6.642956] type=1400 audit(1367147451.590:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=924 comm="apparmor_parser"
<6>[ 6.663696] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<3>[ 6.671946] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
<3>[ 6.672050] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
<6>[ 6.688612] MCE: In-kernel MCE decoding enabled.
<6>[ 6.689959] EDAC MC: Ver: 2.1.0
<6>[ 6.691317] AMD64 EDAC driver v3.4.0
<6>[ 6.691385] EDAC amd64: DRAM ECC enabled.
<6>[ 6.691393] EDAC amd64: F10h detected (node 0).
<7>[ 6.691426] EDAC MC: DCT0 chip selects:
<6>[ 6.691428] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.691430] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.691432] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.691434] EDAC amd64: MC: 6: 0MB 7: 0MB
<7>[ 6.691436] EDAC MC: DCT1 chip selects:
<6>[ 6.691437] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.691439] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.691441] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.691443] EDAC amd64: MC: 6: 0MB 7: 0MB
<6>[ 6.691444] EDAC amd64: using x4 syndromes.
<6>[ 6.691446] EDAC amd64: MCT channel count: 2
<6>[ 6.691469] EDAC amd64: CS0: Registered DDR2 RAM
<6>[ 6.691471] EDAC amd64: CS2: Registered DDR2 RAM
<6>[ 6.691495] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
<6>[ 6.691540] EDAC amd64: DRAM ECC enabled.
<6>[ 6.691685] EDAC amd64: F10h detected (node 1).
<7>[ 6.691862] EDAC MC: DCT0 chip selects:
<6>[ 6.691864] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.691867] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.691869] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.691870] EDAC amd64: MC: 6: 0MB 7: 0MB
<7>[ 6.691872] EDAC MC: DCT1 chip selects:
<6>[ 6.691874] EDAC amd64: MC: 0: 1024MB 1: 0MB
<6>[ 6.691875] EDAC amd64: MC: 2: 1024MB 3: 0MB
<6>[ 6.691877] EDAC amd64: MC: 4: 0MB 5: 0MB
<6>[ 6.691879] EDAC amd64: MC: 6: 0MB 7: 0MB
<6>[ 6.691881] EDAC amd64: using x4 syndromes.
<6>[ 6.691882] EDAC amd64: MCT channel count: 2
<6>[ 6.691922] EDAC amd64: CS0: Registered DDR2 RAM
<6>[ 6.691924] EDAC amd64: CS2: Registered DDR2 RAM
<6>[ 6.691959] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
<6>[ 6.692628] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
<4>[ 6.703244] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
<6>[ 6.703254] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
<6>[ 6.703258] hda_intel: Disabling MSI
<7>[ 6.703551] snd_hda_intel 0000:00:06.1: setting latency timer to 64
<6>[ 6.738920] Linux video capture interface: v2.00
<4>[ 6.795222] init: failsafe main process (1196) killed by TERM signal
<5>[ 6.857216] type=1400 audit(1367147451.805:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1278 comm="apparmor_parser"
<5>[ 6.857698] type=1400 audit(1367147451.805:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1279 comm="apparmor_parser"
<5>[ 6.857966] type=1400 audit(1367147451.805:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=1285 comm="apparmor_parser"
<5>[ 6.858132] type=1400 audit(1367147451.806:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/clamd" pid=1283 comm="apparmor_parser"
<5>[ 6.858244] type=1400 audit(1367147451.806:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1279 comm="apparmor_parser"
<7>[ 6.903340] forcedeth 0000:00:08.0: irq 85 for MSI/MSI-X
<6>[ 6.903581] forcedeth 0000:00:08.0: eth0: no link during initialization
<6>[ 6.905250] ADDRCONF(NETDEV_UP): eth0: link is not ready
<7>[ 6.908750] forcedeth 0000:00:09.0: irq 86 for MSI/MSI-X
<6>[ 6.924800] hda_codec: ALC262: SKU not ready 0x411111f0
<4>[ 7.020680] init: alsa-restore main process (1373) terminated with status 19
<6>[ 7.050184] kvm: Nested Virtualization enabled
<6>[ 7.050191] kvm: Nested Paging enabled
<6>[ 7.065152] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input6
<6>[ 7.065261] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
<4>[ 7.721126] 3:3:1: cannot get freq at ep 0x86
<6>[ 7.865396] usbcore: registered new interface driver snd-usb-audio
<6>[ 7.865411] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
<6>[ 7.881656] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7:1.0/input/input8
<6>[ 7.881752] usbcore: registered new interface driver uvcvideo
<6>[ 7.881754] USB Video Class driver (1.1.1)
<7>[ 8.010250] vboxdrv: Found 8 processor cores.
<4>[ 8.010646] vboxdrv: fAsync=0 offMin=0x651 offMax=0xa5af
<6>[ 8.010743] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
<7>[ 8.010746] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
<6>[ 8.022188] vboxpci: IOMMU not found (not registered)
<4>[ 8.567721] init: plymouth-stop pre-start process (2658) terminated with status 1
ludovic@Super-Ordinateur:~$ édit : merci à david69 pour avoir mis le doigt là dessus.
Dernière modification par Compte supprimé (Le 28/04/2013, à 13:17)
#37 Le 28/04/2013, à 13:19
- tiramiseb
Re : demarrage en 25 sec
et bien sûr que dhpc interviens si ce n'est pas une ip fixe
Et bien sûr que non.
Sur l'exemple que j'ai donné plus haut, le trou est entre 6,29s et 10,62s.
La carte wifi s'authentifie sur le réseau wifi entre 10,62s et 10,64s.
Le DHCP n'est utilisé qu'après la connexion au réseau wifi, donc après 10,64s : il n'influe pas sur le trou entre 6,29s et 10,62s.
Sébastien Maccagnoni - https://www.maccagnoni.eu - https://www.domotego.com
Hors ligne
#38 Le 28/04/2013, à 13:21
- tiramiseb
Re : demarrage en 25 sec
faucon50 a écrit :
Perso je suis en "pseudo" eth0 ip fixe et je fais starter le networking en // au boot et je n'ai aucun trou. La preuve:
[...]
Là tu nous as montré tes logs jusqu'à 5,215547s. Il y a quoi après ?
Pour rappel, moi le "trou" est entre 6s et 10s.
Si tu prends /var/log/dmesg, alors oui ton trou n'y est pas. Mon /var/log/dmesg s'arrête à 3 secondes et quelques.
Sébastien Maccagnoni - https://www.maccagnoni.eu - https://www.domotego.com
Hors ligne
#39 Le 28/04/2013, à 13:30
- swapof
Re : demarrage en 25 sec
et quand on a :GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" qui ne résout pas l'histoire du son en hdmi,d'ailleurs ! mais je laisse au cas ou le bug serait réparé....
je met :GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1 iommu=noaperture" ?
ou :GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1,iommu=noaperture" ?
#40 Le 28/04/2013, à 13:35
- Compte supprimé
Re : demarrage en 25 sec
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1 iommu=noaperture"#41 Le 28/04/2013, à 13:45
- swapof
Re : demarrage en 25 sec
merci,c'est cool !
je vérifie si je gagne quelques dixième de secondes 
mais,c'est inutile de faire chercher un truc qui n'existe pas à grub.
yes....merci mérité ! je suis passé de 6.84s à 5.97s
[ 3.865934] <6>[fglrx] Reserved FB block: Unshared offset:7ffef000, size:1100
0
[ 5.973460] r8169 0000:06:00.0 eth0: link up
[ 5.973468] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyj'avais testé 5-6 fois avant,et c'était toujours entre 6.84s et 6.89s ,c'est pas négligeable 
Dernière modification par swapof (Le 28/04/2013, à 13:52)
#42 Le 28/04/2013, à 15:15
- F50
Re : demarrage en 25 sec
L_d_v_c@ a écrit :
encore deux secondes de gagnées
Tu peux en gagner encore... si tu n'es pas en dual boot, vires os-prober et si tu n'as pas de laptop vires laptop-detect.
swapof a écrit :
je met :GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1 iommu=noaperture" ?
ou :GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1,iommu=noaperture" ?
Pourquoi réinventer l'eau chaude alors que je me suis pris la peine de mettre la phrase..!
swapof a écrit :
mais,c'est inutile de faire chercher un truc qui n'existe pas à grub.
C'est pas grub mais le noyau qui réparti la mémoire...
tiramiseb a écrit :
Là tu nous as montré tes logs jusqu'à 5,215547s. Il y a quoi après ?
04-28 08:52 dbus: <29>Apr 28 08:52:04 dbus[907]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
04-28 08:52 dbus: <29>Apr 28 08:52:04 dbus[907]: [system] Successfully activated service 'org.freedesktop.UDisks'
04-28 08:54 kernel: [ 136.438956] [UFW BLOCK] IN=eth0 OUT= MAC.....................
Je t'ai mis toute la séquence du boot (syslog), bureau et net connexion établie, dmesg est moins complet, après c'est UFW qui commence à faire son boulot.
Dernière modification par faucon50 (Le 28/04/2013, à 15:20)
#43 Le 28/04/2013, à 15:23
- swapof
Re : demarrage en 25 sec
bein,j'ai radeon.audio=1
je ne savais pas si je devais mettre un espace ou une virgule entre radeon.audio=1 et iommu=noaperture
je ne réinvente pas l'eau chaude 
je pose une question !
#44 Le 28/04/2013, à 15:44
- F50
Re : demarrage en 25 sec
swapof a écrit :
bein,j'ai radeon.audio=1
je ne savais pas si je devais mettre un espace ou une virgule entre radeon.audio=1 et iommu=noaperture
je ne réinvente pas l'eau chaude je pose une question !
Je comprends bien mais une option est une option quelle qu'elle soit, dans mon poste il n'y avait pas de ",", en tapant grub options dans ton moteur de recherches tu aurais eu la réponse en 30s. C'est pas un luxe de s'informer par soi-même, tout le monde peut faire une erreur de typo en donnant une commande qui peut te coûter un plantage intégrale. En bref, c'est bien de savoir le pourquoi du comment, malgré les conseils/aides des tiers.
#45 Le 28/04/2013, à 16:30
- swapof
Re : demarrage en 25 sec
édit : effacé mes jérémiades....ça ne sert à rien d'insister
mais,vas-y fais pas ton rabat-joie....cool.
Dernière modification par swapof (Le 28/04/2013, à 17:29)
#46 Le 28/04/2013, à 17:53
- F50
Re : demarrage en 25 sec
swapof a écrit :
édit : effacé mes jérémiades....ça ne sert à rien d'insister
mais,vas-y fais pas ton rabat-joie....cool.
Je vois pas pourquoi je serais rabat-joie mais loin de moi l'idée de te contredire... Si la commande à servi, chouette. 
#47 Le 28/04/2013, à 18:26
- swapof
Re : demarrage en 25 sec
carrément servi. c'est cool de ta part.
suis un peu agacé de toutes les petites réflections ,pour des détails sans importances...
c'est bon...il n'y a personne de parfait !
un peu plus de tolérance ne serai pas négligeable...il y en a qui ne demandent pas,par peur de ne pas pouvoir s'exprimer assez bien .(mon cas à l'époque d'edgy ,et les épreuves de la vie m'ont amené à aujourd'hui !!
je sais bien que tu as vu que j'était pas un novice sur ubuntu,mais,tu aurais répondu ça ? à un utilisateur qui débarque d'hier sur linux ?
#48 Le 28/04/2013, à 18:54
- F50
Re : demarrage en 25 sec
Je comprend ta réflexion mais je ne voulais pas te vexer, juste te rendre attentif à ne pas simplement recopier des commandes, désolé.
swapof a écrit :
je sais bien que tu as vu que j'était pas un novice sur ubuntu,mais,tu aurais répondu ça ? à un utilisateur qui débarque d'hier sur linux ?
Bien sur que non, déjà un novice ne cherche pas faire à baisser son temps de boot. Etant donné que tu avais déjà une option, il était pour moi clair que tu connaissais sa mise en oeuvre, à mon tort.
Sans rancunes, bon boot.
#49 Le 28/04/2013, à 19:11
- swapof
Re : demarrage en 25 sec
ba...je me suis emporté pour rien ! t'es pas la cause.en plus tu ma aidé !
bonne soiré en tous cas.
#50 Le 28/04/2013, à 20:28
- F50
Re : demarrage en 25 sec
swapof a écrit :
ba...je me suis emporté pour rien ! t'es pas la cause.en plus tu ma aidé !
bonne soiré en tous cas.
Pas de lézard, je prend pas tout perso ou au sérieux.
tiramiseb a écrit :
Sur l'exemple que j'ai donné plus haut, le trou est entre 6,29s et 10,62s.
La carte wifi s'authentifie sur le réseau wifi entre 10,62s et 10,64s.
J'ai bien compris!
[ 6.290643] init: plymouth-stop pre-start process (1679) terminated with status 1
[ 10.628886] wlan0: authenticate with f4:ca:e5:e7:1d:c4
Mais avant de s'authentifier il faut qu'il établisse la connexion sinon comment veut-il pouvoir le faire? Et pour moi ce trou avant authentification est la recherche de la connexion pour pouvoir ensuite s'authentifier...