Ubuntu-fr

joe97

[Résolu] instabilité 12.04 après mise à jour

Bonjour

J'ai installé Ubuntu sur le PC d'une de mes connaissances . C'est un PC d'assembleur ( Je n'ai pas ici les caractéristiques détaillées , le processeur est un intel i3 , il y a je crois 4Go de Ram ) , ubuntu est le seul système installé .
J'avais d'abord installé Lucid , et tout a toujours bien fonctionné
J'ai ensuite fait le passage à Precise ( Nouvelle installation ) en octobre 2012 , pensant que la version était alors bien stable
Jusqu'ici , cela a fonctionné , avec parfois quelques petits problèmes sans conséquence .

Je passe de temps à autre faire un peu de "maintenance"
Je viens justement de faire effectuer les dernières mises à jour ( qui incluent le passage au noyau  3.2.0-40 ) , et là , mauvaise surprise après redémarrage , plus de contrôle ( La souris continue d'être partiellement prise en charge , mais plus de clavier )
Impossible de reprendre la main ( Pas de Ctrl-Alt-F1 ou autre , puisque le clavier ne répond plus ) , je dois faire un reset

Après redémarrage , le comportement est chaotique , la barre d'unity est incomplète ,  l'écran s'éteint , puis revient , puis recommence ... J'obtiens le message "Désolé , Ubuntu a rencontré une erreur interne " , mais pas possible d'envoyer un rapport de bug , tout se fige de nouveau , plus de clavier ...

De nouveau Reset , redémarrage , extinction "propre , puis redémarrage ...
Le système semble fonctionner et je n'ai pas poursuivi de tests faute de temps mais je crains que ce type de problème revienne ( Et si c'est peu agréable quand cela arrive sur son ordi , ça l'est bien moins quand ça arrive sur l'ordi d'une personne q'on a "convaincu" de passer au libre ... )

Bref , je croise les doigts pour que les plantages ne se reproduisent pas , et surtout j'aimerais savoir si quelqu'un a eu de tels problèmes et comment cela s'est passé pour les résoudre

Merci par avance pour vos réponses
Joel

Précisions
La carte mère est une ASUS P8H61-M LE
Processeur intel core i3-2100 S1155
Mémoire 4Go DDR3 CORSAIR 1333

Dernière modification par joe97 (Le 09/05/2013, à 11:14)

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Les problèmes ne sont pas résolus ...
Heureusement c'est un ordinateur qui n'est pas utilisé de façon intensive !
Le système se bloque assez vite au bout de quelques minutes .
J'ai essayé d'intervenir en mode texte ( sur tty1 ) mais j'ai obtenu des choses comme :

Asking for cache data failed
  Assuming drive cache : write through

Serait-ce un problème matériel ? Le disque dur fait du bruit . Par contre un système lancé en live-usb semble fonctionner sans problème ( Je n'ai pas eu réellement le temps de le  tester en détail toutefois )

Mais aussi ,en essayant une mise à jour , j'ai eu un message faisant état de dépendances manquantes et me conseillant un apt-get -f install  ( que je n'ai pas fait avant de me renseigner plus avant )

Si vous avez des idées , elles seront les bienvenues car je patauge

Edit ( 3 mai )

Rien ne va plus
Il devient impossible d'utiliser l'ordinateur qui se plante au bout d'une ou deux minutes
Même l'utilisation en mode console devient impossible
Je n'ai pas le temps d'entrer une commande que des informations apparaissent du genre

BUG:soft lockup-CPU#1 stuck for 23s!
INFO task jbd2/sda1-8 : 238 blocked for more than 120 seconds
INFO rcu_sched detected stall on CPU1 ( = 105060 jiffies )

Etc ... ( L'écran est plein et les informations défilent )

Une recherche sur internet m'a montré que ce genre de choses arrive . J'ai trouvé beaucoup de discussions ( souvent en anglais ) traitant de ces problèmes , mais j'avoue ne pas avoir bien compris ce qui s'est dit ( Il me semble parfois que ce que j'ai lu pouvait comporter des contradictions , que cela pouvait se référer à des situations différentes et que des conclusions différentes étaient proposées ... mais mon niveau en anglais ne me rend pas service )

Si vous pensez pouvoir m'en dire plus de façon compréhensible ,ça me rendrait bien service  !
Bonne soirée

Dernière modification par joe97 (Le 04/05/2013, à 23:18)

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

J'ai constaté en parcourant le forum ( et surtout les questions sans réponses , hélas ) qu'il y a plusieurs situations similaires ( pas identiques , mais avec en commun un "freeze" ou tout du moins l'impossibilité d'intervenir car le clavier n'est plus reconnu )
Dommage que les posteurs n'indiquent en général pas quel est leur matériel , ni même parfois la version d'ubuntu , il y a peut-être un problème avec certains types de matériels ( ?? )

J'arrive à faire fonctionner l'ordinateur avec une version antérieure de Precise ( En live-usb )
Mon problème doit donc bien être lié à la mise à jour effectuée
( ou alors c'est un problème de disque dur ? Possible car il fait parfois du bruit mais je n'y crois pas )

Comment peut-on faire pour essayer de savoir si le problème est matériel ou vient du logiciel ?
Si vous avez une idée ...

alca94

Re : [Résolu] instabilité 12.04 après mise à jour

Bonsoir
Vous ne parlez pas de la carte graphique ni si vous avez installé les pilotes propriétaires ,c'est quoi comme carte (dans le terminal Ctrl + Alt +T)

lspci -vnn | grep '\''[030[02]\]'

---

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Merci pour la réponse

J'obtiens :
00:02.0 VGA Compatible Controller [0300] : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
[ 8086 : 0102 ] ( Rev 09 ) ( prog-if00 [VGA Controller ] )

( J'ai du recopier le résultat , j'espère ne pas avoir fait de fautes de frappe )

NooP

Re : [Résolu] instabilité 12.04 après mise à jour

Ça ressemble fortement à un problème disque.

INFO task jbd2/sda1-8 : 238 blocked for more than 120 seconds 

D'après l'info, c'est le programme de journalisation qui n'arrive pas à ecrire sur le disque. Tu devrais trouver des erreurs dans /var/log/kern.log :

Que donne le retour de :

cat /var/log/kern.log | grep "ata"

---

Votez Macron, vous l'aurez dans le fion !

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

cat /var/log/kern.log | grep "ata"

renvoie plusieurs pages :

May  1 19:40:33 joel-System-Product-Name kernel: [    1.335849] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:40:33 joel-System-Product-Name kernel: [    1.335858] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336012] scsi2 : ata_piix
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336056] scsi3 : ata_piix
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336534] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:40:33 joel-System-Product-Name kernel: [    1.336536] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:40:33 joel-System-Product-Name kernel: [    2.527300] ata1.01: failed to resume link (SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.527372] ata2.01: failed to resume link (SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683294] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683307] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683318] ata2.01: link offline, clearing class 3 to NONE
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683431] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.683443] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.691660] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:40:33 joel-System-Product-Name kernel: [    2.691889] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:40:33 joel-System-Product-Name kernel: [    2.691894] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:40:33 joel-System-Product-Name kernel: [    2.707601] ata2.00: configured for UDMA/100
May  1 19:40:33 joel-System-Product-Name kernel: [    2.707949] ata1.00: configured for UDMA/133
May  1 19:40:33 joel-System-Product-Name kernel: [    2.931978] Write protecting the kernel read-only data: 12288k
May  1 19:40:33 joel-System-Product-Name kernel: [    3.624618] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:41:12 joel-System-Product-Name kernel: [   56.679776] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:42:05 joel-System-Product-Name kernel: [  108.879269] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:42:57 joel-System-Product-Name kernel: [  161.078712] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:43:47 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:43:47 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  1 19:43:47 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  1 19:43:47 joel-System-Product-Name kernel: [    1.090897] ata_piix 0000:00:1f.2: version 2.13
May  1 19:43:47 joel-System-Product-Name kernel: [    1.090912] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.090916] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244032] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244230] scsi0 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244278] scsi1 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244898] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244902] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244915] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.244920] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:43:47 joel-System-Product-Name kernel: [    1.399940] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:43:47 joel-System-Product-Name kernel: [    1.399950] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400101] scsi2 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400145] scsi3 : ata_piix
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400623] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    1.400624] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:43:47 joel-System-Product-Name kernel: [    2.591394] ata2.01: failed to resume link (SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.595392] ata1.01: failed to resume link (SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.747401] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.747414] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.747424] ata2.01: link offline, clearing class 3 to NONE
May  1 19:43:47 joel-System-Product-Name kernel: [    2.751393] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.751404] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.755573] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:43:47 joel-System-Product-Name kernel: [    2.759897] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:43:47 joel-System-Product-Name kernel: [    2.759903] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:43:47 joel-System-Product-Name kernel: [    2.771564] ata2.00: configured for UDMA/100
May  1 19:43:47 joel-System-Product-Name kernel: [    2.775867] ata1.00: configured for UDMA/133
May  1 19:43:47 joel-System-Product-Name kernel: [    2.829261] Write protecting the kernel read-only data: 12288k
May  1 19:43:47 joel-System-Product-Name kernel: [    3.195508] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:44:26 joel-System-Product-Name kernel: [   55.656264] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:45:18 joel-System-Product-Name kernel: [  107.880373] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:46:17 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:46:17 joel-System-Product-Name kernel: [    0.160937] PEBS disabled due to CPU errata.
May  1 19:46:17 joel-System-Product-Name kernel: [    0.520565] libata version 3.00 loaded.
May  1 19:46:17 joel-System-Product-Name kernel: [    1.094947] ata_piix 0000:00:1f.2: version 2.13
May  1 19:46:17 joel-System-Product-Name kernel: [    1.094963] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.094967] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248047] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248248] scsi0 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248297] scsi1 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248915] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248919] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248932] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.248936] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:46:17 joel-System-Product-Name kernel: [    1.403956] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:46:17 joel-System-Product-Name kernel: [    1.403966] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404115] scsi2 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404158] scsi3 : ata_piix
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404634] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    1.404636] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:46:17 joel-System-Product-Name kernel: [    2.595414] ata1.01: failed to resume link (SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.599412] ata2.01: failed to resume link (SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.751419] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.751430] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.755406] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.755419] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.755429] ata2.01: link offline, clearing class 3 to NONE
May  1 19:46:17 joel-System-Product-Name kernel: [    2.759908] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:46:17 joel-System-Product-Name kernel: [    2.759913] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:46:17 joel-System-Product-Name kernel: [    2.763585] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:46:17 joel-System-Product-Name kernel: [    2.775877] ata1.00: configured for UDMA/133
May  1 19:46:17 joel-System-Product-Name kernel: [    2.779548] ata2.00: configured for UDMA/100
May  1 19:46:17 joel-System-Product-Name kernel: [    2.829373] Write protecting the kernel read-only data: 12288k
May  1 19:46:17 joel-System-Product-Name kernel: [    3.538974] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:46:55 joel-System-Product-Name kernel: [   55.656411] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:47:47 joel-System-Product-Name kernel: [  107.879896] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:48:40 joel-System-Product-Name kernel: [  160.105475] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:49:32 joel-System-Product-Name kernel: [  212.330928] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:50:24 joel-System-Product-Name kernel: [  264.556693] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:51:16 joel-System-Product-Name kernel: [  316.782014] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:52:39 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:52:39 joel-System-Product-Name kernel: [    0.160937] PEBS disabled due to CPU errata.
May  1 19:52:39 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  1 19:52:39 joel-System-Product-Name kernel: [    1.043326] ata_piix 0000:00:1f.2: version 2.13
May  1 19:52:39 joel-System-Product-Name kernel: [    1.043342] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.043345] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:52:39 joel-System-Product-Name kernel: [    1.195919] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196123] scsi0 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196171] scsi1 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196788] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196792] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196806] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.196810] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:52:39 joel-System-Product-Name kernel: [    1.351838] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:52:39 joel-System-Product-Name kernel: [    1.351848] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352000] scsi2 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352043] scsi3 : ata_piix
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352519] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    1.352521] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:52:39 joel-System-Product-Name kernel: [    2.543292] ata1.01: failed to resume link (SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.547290] ata2.01: failed to resume link (SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.699302] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.699314] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.703279] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.703292] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.703302] ata2.01: link offline, clearing class 3 to NONE
May  1 19:52:39 joel-System-Product-Name kernel: [    2.707792] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:52:39 joel-System-Product-Name kernel: [    2.707797] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:52:39 joel-System-Product-Name kernel: [    2.711464] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:52:39 joel-System-Product-Name kernel: [    2.723761] ata1.00: configured for UDMA/133
May  1 19:52:39 joel-System-Product-Name kernel: [    2.727427] ata2.00: configured for UDMA/100
May  1 19:52:39 joel-System-Product-Name kernel: [    2.778915] Write protecting the kernel read-only data: 12288k
May  1 19:52:39 joel-System-Product-Name kernel: [    3.115693] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:53:19 joel-System-Product-Name kernel: [   56.680021] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:54:12 joel-System-Product-Name kernel: [  108.854141] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:55:04 joel-System-Product-Name kernel: [  161.027627] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:55:56 joel-System-Product-Name kernel: [  213.201013] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:57:03 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:57:03 joel-System-Product-Name kernel: [    0.160939] PEBS disabled due to CPU errata.
May  1 19:57:03 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  1 19:57:03 joel-System-Product-Name kernel: [    1.078955] ata_piix 0000:00:1f.2: version 2.13
May  1 19:57:03 joel-System-Product-Name kernel: [    1.078970] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.078974] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232046] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232241] scsi0 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232290] scsi1 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232911] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232915] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232929] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.232933] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:57:03 joel-System-Product-Name kernel: [    1.387971] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:57:03 joel-System-Product-Name kernel: [    1.387980] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388128] scsi2 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388170] scsi3 : ata_piix
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388650] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    1.388652] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:57:03 joel-System-Product-Name kernel: [    2.579419] ata1.01: failed to resume link (SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.591414] ata2.01: failed to resume link (SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.735419] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.735430] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.743909] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:57:03 joel-System-Product-Name kernel: [    2.743914] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.747409] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.747422] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:57:03 joel-System-Product-Name kernel: [    2.747432] ata2.01: link offline, clearing class 3 to NONE
May  1 19:57:03 joel-System-Product-Name kernel: [    2.755583] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:57:03 joel-System-Product-Name kernel: [    2.759885] ata1.00: configured for UDMA/133
May  1 19:57:03 joel-System-Product-Name kernel: [    2.771580] ata2.00: configured for UDMA/100
May  1 19:57:03 joel-System-Product-Name kernel: [    2.819589] Write protecting the kernel read-only data: 12288k
May  1 19:57:03 joel-System-Product-Name kernel: [    3.559649] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:57:42 joel-System-Product-Name kernel: [   56.679918] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:58:25 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  1 19:58:25 joel-System-Product-Name kernel: [    0.160939] PEBS disabled due to CPU errata.
May  1 19:58:25 joel-System-Product-Name kernel: [    0.520561] libata version 3.00 loaded.
May  1 19:58:25 joel-System-Product-Name kernel: [    0.987001] ata_piix 0000:00:1f.2: version 2.13
May  1 19:58:25 joel-System-Product-Name kernel: [    0.987017] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:58:25 joel-System-Product-Name kernel: [    0.987020] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140088] ata_piix 0000:00:1f.2: setting latency timer to 64
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140287] scsi0 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140335] scsi1 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140953] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140957] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140972] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.140975] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296007] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296016] ata_piix 0000:00:1f.5: setting latency timer to 64
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296165] scsi2 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296207] scsi3 : ata_piix
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296687] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    1.296689] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  1 19:58:25 joel-System-Product-Name kernel: [    2.487462] ata2.01: failed to resume link (SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.487534] ata1.01: failed to resume link (SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643458] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643469] ata1.01: SATA link down (SStatus 0 SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643589] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643602] ata2.01: SATA link down (SStatus 0 SControl 0)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.643612] ata2.01: link offline, clearing class 3 to NONE
May  1 19:58:25 joel-System-Product-Name kernel: [    2.651763] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  1 19:58:25 joel-System-Product-Name kernel: [    2.652142] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  1 19:58:25 joel-System-Product-Name kernel: [    2.652148] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  1 19:58:25 joel-System-Product-Name kernel: [    2.667754] ata2.00: configured for UDMA/100
May  1 19:58:25 joel-System-Product-Name kernel: [    2.668099] ata1.00: configured for UDMA/133
May  1 19:58:25 joel-System-Product-Name kernel: [    2.728083] Write protecting the kernel read-only data: 12288k
May  1 19:58:25 joel-System-Product-Name kernel: [    3.406815] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  1 19:59:03 joel-System-Product-Name kernel: [   54.647362] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 19:59:56 joel-System-Product-Name kernel: [  106.808641] sd 4:0:0:0: [sdb] Asking for cache data failed
May  1 20:00:48 joel-System-Product-Name kernel: [  158.982406] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:10:57 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 17:10:57 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 17:10:57 joel-System-Product-Name kernel: [    0.520567] libata version 3.00 loaded.
May  3 17:10:57 joel-System-Product-Name kernel: [    1.078781] ata_piix 0000:00:1f.2: version 2.13
May  3 17:10:57 joel-System-Product-Name kernel: [    1.078797] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.078800] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 17:10:57 joel-System-Product-Name kernel: [    1.231910] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232108] scsi0 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232164] scsi1 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232783] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232787] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232800] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.232803] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 17:10:57 joel-System-Product-Name kernel: [    1.387816] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 17:10:57 joel-System-Product-Name kernel: [    1.387825] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 17:10:57 joel-System-Product-Name kernel: [    1.387980] scsi2 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.388021] scsi3 : ata_piix
May  3 17:10:57 joel-System-Product-Name kernel: [    1.388499] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    1.388500] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 17:10:57 joel-System-Product-Name kernel: [    2.579281] ata2.01: failed to resume link (SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.579352] ata1.01: failed to resume link (SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735271] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735283] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735403] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735416] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.735426] ata2.01: link offline, clearing class 3 to NONE
May  3 17:10:57 joel-System-Product-Name kernel: [    2.743586] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 17:10:57 joel-System-Product-Name kernel: [    2.743957] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 17:10:57 joel-System-Product-Name kernel: [    2.743962] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 17:10:57 joel-System-Product-Name kernel: [    2.759628] ata2.00: configured for UDMA/100
May  3 17:10:57 joel-System-Product-Name kernel: [    2.759854] ata1.00: configured for UDMA/133
May  3 17:10:57 joel-System-Product-Name kernel: [    2.809035] Write protecting the kernel read-only data: 12288k
May  3 17:10:57 joel-System-Product-Name kernel: [    3.245939] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 17:11:36 joel-System-Product-Name kernel: [   55.144502] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:12:29 joel-System-Product-Name kernel: [  107.344006] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:13:22 joel-System-Product-Name kernel: [  159.543367] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 17:14:14 joel-System-Product-Name kernel: [  211.742853] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:05:47 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 18:05:47 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 18:05:47 joel-System-Product-Name kernel: [    0.520568] libata version 3.00 loaded.
May  3 18:05:47 joel-System-Product-Name kernel: [    1.082793] ata_piix 0000:00:1f.2: version 2.13
May  3 18:05:47 joel-System-Product-Name kernel: [    1.082808] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.082812] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 18:05:47 joel-System-Product-Name kernel: [    1.235921] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236119] scsi0 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236174] scsi1 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236792] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236797] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236810] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.236814] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 18:05:47 joel-System-Product-Name kernel: [    1.391840] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 18:05:47 joel-System-Product-Name kernel: [    1.391849] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392005] scsi2 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392047] scsi3 : ata_piix
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392523] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    1.392525] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 18:05:47 joel-System-Product-Name kernel: [    2.583290] ata2.01: failed to resume link (SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.583361] ata1.01: failed to resume link (SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739290] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739301] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739421] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739434] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.739445] ata2.01: link offline, clearing class 3 to NONE
May  3 18:05:47 joel-System-Product-Name kernel: [    2.747640] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 18:05:47 joel-System-Product-Name kernel: [    2.747837] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 18:05:47 joel-System-Product-Name kernel: [    2.747839] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 18:05:47 joel-System-Product-Name kernel: [    2.763583] ata2.00: configured for UDMA/100
May  3 18:05:47 joel-System-Product-Name kernel: [    2.763913] ata1.00: configured for UDMA/133
May  3 18:05:47 joel-System-Product-Name kernel: [    2.798817] Write protecting the kernel read-only data: 12288k
May  3 18:05:47 joel-System-Product-Name kernel: [    3.176200] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 18:06:26 joel-System-Product-Name kernel: [   55.144275] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:07:18 joel-System-Product-Name kernel: [  107.368274] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:09:14 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 18:09:14 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 18:09:14 joel-System-Product-Name kernel: [    0.524560] libata version 3.00 loaded.
May  3 18:09:14 joel-System-Product-Name kernel: [    1.094896] ata_piix 0000:00:1f.2: version 2.13
May  3 18:09:14 joel-System-Product-Name kernel: [    1.094912] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.094915] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248027] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248228] scsi0 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248283] scsi1 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248901] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248905] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248918] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.248922] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 18:09:14 joel-System-Product-Name kernel: [    1.403940] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 18:09:14 joel-System-Product-Name kernel: [    1.403950] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404110] scsi2 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404150] scsi3 : ata_piix
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404626] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    1.404628] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 18:09:14 joel-System-Product-Name kernel: [    2.595395] ata2.01: failed to resume link (SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.595467] ata1.01: failed to resume link (SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751391] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751403] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751522] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751535] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.751545] ata2.01: link offline, clearing class 3 to NONE
May  3 18:09:14 joel-System-Product-Name kernel: [    2.759699] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 18:09:14 joel-System-Product-Name kernel: [    2.760067] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 18:09:14 joel-System-Product-Name kernel: [    2.760072] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 18:09:14 joel-System-Product-Name kernel: [    2.775735] ata2.00: configured for UDMA/100
May  3 18:09:14 joel-System-Product-Name kernel: [    2.775962] ata1.00: configured for UDMA/133
May  3 18:09:14 joel-System-Product-Name kernel: [    2.829592] Write protecting the kernel read-only data: 12288k
May  3 18:09:14 joel-System-Product-Name kernel: [    3.678183] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 18:09:53 joel-System-Product-Name kernel: [   56.168075] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:10:45 joel-System-Product-Name kernel: [  108.343180] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:11:37 joel-System-Product-Name kernel: [  160.516803] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:12:29 joel-System-Product-Name kernel: [  212.690177] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:13:22 joel-System-Product-Name kernel: [  264.863297] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 18:14:14 joel-System-Product-Name kernel: [  317.567260] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:48:42 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 19:48:42 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 19:48:42 joel-System-Product-Name kernel: [    0.520568] libata version 3.00 loaded.
May  3 19:48:42 joel-System-Product-Name kernel: [    1.086772] ata_piix 0000:00:1f.2: version 2.13
May  3 19:48:42 joel-System-Product-Name kernel: [    1.086787] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.086791] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 19:48:42 joel-System-Product-Name kernel: [    1.239905] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240104] scsi0 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240160] scsi1 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240777] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240781] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240794] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.240797] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 19:48:42 joel-System-Product-Name kernel: [    1.395817] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 19:48:42 joel-System-Product-Name kernel: [    1.395827] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 19:48:42 joel-System-Product-Name kernel: [    1.395985] scsi2 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.396025] scsi3 : ata_piix
May  3 19:48:42 joel-System-Product-Name kernel: [    1.396502] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    1.396504] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 19:48:42 joel-System-Product-Name kernel: [    2.587272] ata2.01: failed to resume link (SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.587344] ata1.01: failed to resume link (SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743273] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743285] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743404] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743417] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.743428] ata2.01: link offline, clearing class 3 to NONE
May  3 19:48:42 joel-System-Product-Name kernel: [    2.751577] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 19:48:42 joel-System-Product-Name kernel: [    2.751956] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 19:48:42 joel-System-Product-Name kernel: [    2.751961] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 19:48:42 joel-System-Product-Name kernel: [    2.767567] ata2.00: configured for UDMA/100
May  3 19:48:42 joel-System-Product-Name kernel: [    2.767931] ata1.00: configured for UDMA/133
May  3 19:48:42 joel-System-Product-Name kernel: [    2.819321] Write protecting the kernel read-only data: 12288k
May  3 19:48:42 joel-System-Product-Name kernel: [    5.308117] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 19:49:17 joel-System-Product-Name kernel: [   55.657055] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:50:09 joel-System-Product-Name kernel: [  107.855783] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:51:02 joel-System-Product-Name kernel: [  160.054990] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:51:54 joel-System-Product-Name kernel: [  212.766524] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:52:47 joel-System-Product-Name kernel: [  264.965913] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:53:39 joel-System-Product-Name kernel: [  317.677133] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 19:54:32 joel-System-Product-Name kernel: [  369.876367] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:22:44 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  3 21:22:44 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  3 21:22:44 joel-System-Product-Name kernel: [    0.520566] libata version 3.00 loaded.
May  3 21:22:44 joel-System-Product-Name kernel: [    0.986974] ata_piix 0000:00:1f.2: version 2.13
May  3 21:22:44 joel-System-Product-Name kernel: [    0.986990] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 21:22:44 joel-System-Product-Name kernel: [    0.986993] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140069] ata_piix 0000:00:1f.2: setting latency timer to 64
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140266] scsi0 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140314] scsi1 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140934] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140939] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140952] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.140956] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  3 21:22:44 joel-System-Product-Name kernel: [    1.295988] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  3 21:22:44 joel-System-Product-Name kernel: [    1.295997] ata_piix 0000:00:1f.5: setting latency timer to 64
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296145] scsi2 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296186] scsi3 : ata_piix
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296667] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    1.296668] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  3 21:22:44 joel-System-Product-Name kernel: [    2.487443] ata2.01: failed to resume link (SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.487515] ata1.01: failed to resume link (SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643438] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643449] ata1.01: SATA link down (SStatus 0 SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643567] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643581] ata2.01: SATA link down (SStatus 0 SControl 0)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.643591] ata2.01: link offline, clearing class 3 to NONE
May  3 21:22:44 joel-System-Product-Name kernel: [    2.651748] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  3 21:22:44 joel-System-Product-Name kernel: [    2.652138] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  3 21:22:44 joel-System-Product-Name kernel: [    2.652143] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  3 21:22:44 joel-System-Product-Name kernel: [    2.667739] ata2.00: configured for UDMA/100
May  3 21:22:44 joel-System-Product-Name kernel: [    2.668092] ata1.00: configured for UDMA/133
May  3 21:22:44 joel-System-Product-Name kernel: [    2.711850] Write protecting the kernel read-only data: 12288k
May  3 21:22:44 joel-System-Product-Name kernel: [    3.609510] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  3 21:23:21 joel-System-Product-Name kernel: [   54.647355] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:24:14 joel-System-Product-Name kernel: [  106.832332] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:25:06 joel-System-Product-Name kernel: [  159.031714] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:25:58 joel-System-Product-Name kernel: [  211.231336] sd 4:0:0:0: [sdb] Asking for cache data failed
May  3 21:26:50 joel-System-Product-Name kernel: [  263.430697] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:50:29 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  5 08:50:29 joel-System-Product-Name kernel: [    0.160936] PEBS disabled due to CPU errata.
May  5 08:50:29 joel-System-Product-Name kernel: [    0.520570] libata version 3.00 loaded.
May  5 08:50:29 joel-System-Product-Name kernel: [    0.967397] ata_piix 0000:00:1f.2: version 2.13
May  5 08:50:29 joel-System-Product-Name kernel: [    0.967412] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 08:50:29 joel-System-Product-Name kernel: [    0.967416] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  5 08:50:29 joel-System-Product-Name kernel: [    1.119961] ata_piix 0000:00:1f.2: setting latency timer to 64
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120159] scsi0 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120208] scsi1 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120829] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120834] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120848] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.120852] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  5 08:50:29 joel-System-Product-Name kernel: [    1.275875] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  5 08:50:29 joel-System-Product-Name kernel: [    1.275885] ata_piix 0000:00:1f.5: setting latency timer to 64
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276027] scsi2 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276069] scsi3 : ata_piix
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276549] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    1.276551] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  5 08:50:29 joel-System-Product-Name kernel: [    2.467337] ata2.01: failed to resume link (SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.467409] ata1.01: failed to resume link (SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623326] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623338] ata1.01: SATA link down (SStatus 0 SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623458] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623471] ata2.01: SATA link down (SStatus 0 SControl 0)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.623481] ata2.01: link offline, clearing class 3 to NONE
May  5 08:50:29 joel-System-Product-Name kernel: [    2.631637] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  5 08:50:29 joel-System-Product-Name kernel: [    2.632017] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  5 08:50:29 joel-System-Product-Name kernel: [    2.632022] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  5 08:50:29 joel-System-Product-Name kernel: [    2.647630] ata2.00: configured for UDMA/100
May  5 08:50:29 joel-System-Product-Name kernel: [    2.647972] ata1.00: configured for UDMA/133
May  5 08:50:29 joel-System-Product-Name kernel: [    2.708207] Write protecting the kernel read-only data: 12288k
May  5 08:50:29 joel-System-Product-Name kernel: [    3.095674] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  5 08:51:08 joel-System-Product-Name kernel: [   55.144736] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:52:00 joel-System-Product-Name kernel: [  107.344098] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:52:52 joel-System-Product-Name kernel: [  159.543470] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:53:45 joel-System-Product-Name kernel: [  211.742831] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:54:37 joel-System-Product-Name kernel: [  263.942318] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 08:55:29 joel-System-Product-Name kernel: [  316.141894] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:05:00 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  5 12:05:00 joel-System-Product-Name kernel: [    0.160938] PEBS disabled due to CPU errata.
May  5 12:05:00 joel-System-Product-Name kernel: [    0.520564] libata version 3.00 loaded.
May  5 12:05:00 joel-System-Product-Name kernel: [    1.102908] ata_piix 0000:00:1f.2: version 2.13
May  5 12:05:00 joel-System-Product-Name kernel: [    1.102923] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.102927] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256047] ata_piix 0000:00:1f.2: setting latency timer to 64
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256238] scsi0 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256286] scsi1 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256904] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256908] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256921] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.256926] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  5 12:05:00 joel-System-Product-Name kernel: [    1.411964] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  5 12:05:00 joel-System-Product-Name kernel: [    1.411974] ata_piix 0000:00:1f.5: setting latency timer to 64
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412128] scsi2 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412172] scsi3 : ata_piix
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412651] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    1.412652] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  5 12:05:00 joel-System-Product-Name kernel: [    2.603416] ata1.01: failed to resume link (SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.607415] ata2.01: failed to resume link (SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.759420] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.759431] ata1.01: SATA link down (SStatus 0 SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.763409] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.763422] ata2.01: SATA link down (SStatus 0 SControl 0)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.763432] ata2.01: link offline, clearing class 3 to NONE
May  5 12:05:00 joel-System-Product-Name kernel: [    2.767926] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  5 12:05:00 joel-System-Product-Name kernel: [    2.767931] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  5 12:05:00 joel-System-Product-Name kernel: [    2.771587] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  5 12:05:00 joel-System-Product-Name kernel: [    2.783896] ata1.00: configured for UDMA/133
May  5 12:05:00 joel-System-Product-Name kernel: [    2.787553] ata2.00: configured for UDMA/100
May  5 12:05:00 joel-System-Product-Name kernel: [    2.839751] Write protecting the kernel read-only data: 12288k
May  5 12:05:00 joel-System-Product-Name kernel: [    3.286654] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  5 12:05:39 joel-System-Product-Name kernel: [   55.656387] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:06:34 joel-System-Product-Name kernel: [    0.000000] Memory: 3942128k/5240832k available (6574k kernel code, 1136376k absent, 162328k reserved, 6629k data, 920k init)
May  5 12:06:34 joel-System-Product-Name kernel: [    0.160939] PEBS disabled due to CPU errata.
May  5 12:06:34 joel-System-Product-Name kernel: [    0.520570] libata version 3.00 loaded.
May  5 12:06:34 joel-System-Product-Name kernel: [    0.990997] ata_piix 0000:00:1f.2: version 2.13
May  5 12:06:34 joel-System-Product-Name kernel: [    0.991013] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:06:34 joel-System-Product-Name kernel: [    0.991017] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144086] ata_piix 0000:00:1f.2: setting latency timer to 64
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144287] scsi0 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144335] scsi1 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144956] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144960] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144975] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.144979] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300006] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300016] ata_piix 0000:00:1f.5: setting latency timer to 64
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300165] scsi2 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300207] scsi3 : ata_piix
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300688] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    1.300689] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
May  5 12:06:34 joel-System-Product-Name kernel: [    2.491460] ata1.01: failed to resume link (SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.495470] ata2.01: failed to resume link (SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.647468] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.647480] ata1.01: SATA link down (SStatus 0 SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.651457] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.651470] ata2.01: SATA link down (SStatus 0 SControl 0)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.651480] ata2.01: link offline, clearing class 3 to NONE
May  5 12:06:34 joel-System-Product-Name kernel: [    2.655950] ata1.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
May  5 12:06:34 joel-System-Product-Name kernel: [    2.655955] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  5 12:06:34 joel-System-Product-Name kernel: [    2.659633] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
May  5 12:06:34 joel-System-Product-Name kernel: [    2.671929] ata1.00: configured for UDMA/133
May  5 12:06:34 joel-System-Product-Name kernel: [    2.675585] ata2.00: configured for UDMA/100
May  5 12:06:34 joel-System-Product-Name kernel: [    2.728252] Write protecting the kernel read-only data: 12288k
May  5 12:06:34 joel-System-Product-Name kernel: [    3.360051] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May  5 12:07:11 joel-System-Product-Name kernel: [   54.647516] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:08:05 joel-System-Product-Name kernel: [  106.832492] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:08:58 joel-System-Product-Name kernel: [  159.031854] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:09:50 joel-System-Product-Name kernel: [  211.231339] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:10:42 joel-System-Product-Name kernel: [  263.430826] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:11:34 joel-System-Product-Name kernel: [  315.630437] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:12:27 joel-System-Product-Name kernel: [  367.829924] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:13:19 joel-System-Product-Name kernel: [  420.029285] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:14:11 joel-System-Product-Name kernel: [  472.228647] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:15:03 joel-System-Product-Name kernel: [  524.428256] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:15:55 joel-System-Product-Name kernel: [  576.627618] sd 4:0:0:0: [sdb] Asking for cache data failed
May  5 12:16:48 joel-System-Product-Name kernel: [  628.826834] sd 4:0:0:0: [sdb] Asking for cache data failed

... Que j'ai bien du mal à interpréter ( Quant à sdb , il n'y a qu'un disque dur et pas de clé usb connectée , c'est peut-être un lecteur de cartes ? )
Merci pour l'aide

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Bonsoir
Je fais des recherches dans le forum et dans la doc mais je ne comprends toujours pas d'où vient le problème :

- Quand l'ordinateur freeze ( au bout d'une ou deux minutes ) , le clavier semble ne plus  répondre ( pas moyen d'utiliser Ctrl Alt F1 par exemple ) , MAIS je viens de vérifier ( Je n'y avais pas pensé avant ) que Alt Syst b par exemple fonctionne ( immédiatement ou presque )

- Même quand l'ordinateur est gelé , je peux néanmoins le  contrôler  via ssh par exemple . J'ai ainsi pu faire quelques tests et aussi installer des logiciels . Le disque dur doit donc fonctionner correctement ?

- Les plantages apparaissent en mode graphique seulement . En mode console , il n'y a pas de gel ( mais néanmoins une multitude de messages d'erreur du type :
  Asking for cache data failed
  Assuming drive cache : write through ...
( Cela fait référence à un disque sdb inexistant à moins que cela corresponde à un lecteur de cartes )

Merci d'éclairer ma lanterne pas très brillante en ce moment ...

PS : Pas moyen non plus de démarrer en mode de récupération ou sur un noyau antérieur . L'écran de Grub n'apparaît pas au démarrage , mais cela date de l'installation et ça n'a sans doute aucun rapport avec le problème actuel ...

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Je n'ai toujours pas résolu le problème .
Les données SMART du disque dur indiquent qu'il est en parfait état  ..
Après quelques interventions ( pas toujours faciles car le système se bloque parfois très vite , après une ou deux minutes en mode graphique ) , il y a eu un problème avec Compiz que j'ai désactivé . Et là , utilisation inconfortable mais plus de plantage pendant une quinzaine de minutes , après quoi , j'ai redémarré .
Au redémarrage , Compiz était réactivé mais le système est resté stable ( pendant au moins une demi-heure )
Je pensais le problème résolu ... Mais au redémarrage suivant les problèmes sont revenus .

Je pense qu'il y a peut-être un problème avec Compiz
A moins qu'il n'y ait un problème de gestion des disques
Quelqu'un aurait-il une idée à ce sujet ?

Sinon , je vais m'orienter vers une réinstallation ( Peut-être avec une autre version d'ubuntu ou une autre distribution ) ce qui permettrait de voir si le problème est lié ou non au matériel ... Sauf si on me suggère une autre piste .

alca94

Re : [Résolu] instabilité 12.04 après mise à jour

Bonjour
Et si vous désinstalliez purement et simplement compiz ,juste pour voir

---

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Merci pour la réponse
Effectivement c'est une idée
Dois-je le supprimer
( par exemple apt-get remove compiz   apt-get remove compiz-core )  ?

Merci pour l'aide

Dernière modification par joe97 (Le 08/05/2013, à 12:32)

alca94

Re : [Résolu] instabilité 12.04 après mise à jour

Dans synaptic si vous l'avez installé (clic droit pour désinstallation complète )
si vous ne l'avez pas

sudo apt-get install synaptic 

EDIT Compiz c'est vous qui l'avez installé car moi je ne l'ai pas par défaut

EDIT je ne sais pas si c'est une bonne idée en fin de compte il faut peut-etre choisir pour réinstallation et voir si ça corrige certain problème

Dernière modification par alca94 (Le 08/05/2013, à 12:41)

---

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Je vais essayer cet après-midi
Mais si l'essai est concluant , quelle serait la solution ? ( Pour revenir à une utilisation normale ? )

EDIT : Je n'ai pas installé Compiz  . A un moment donné , j'ai eu un message disant qu'il y avait un problème avec Compiz et me proposant de le désactiver , ce que j'ai fait ( Un choix était proposé )
Mais je n'ai installé que Ubuntu 12.04 , et gnome-shell . Je suppose que Compiz était présent par défaut ou comme dépendance d'un autre paquet.
( Je pensais en fait qu'il était utilisé par Unity )

( Une fois désactivé , il n'y a plus moyen de redimensionner ou de fermer les fenêtres par exemple . On ne parle peut-être pas du même paquet ?? )

Dernière modification par joe97 (Le 08/05/2013, à 12:53)

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

Après plusieurs essais ( plantages ) j'ai pu réinstaller Compiz via Synaptic mais ça ne change rien
Il doit y avoir un autre problème plus général

En console , j'ai ce message :

[ 23.674175 ] [ drm : gen6_sanitize_pm ] * ERROR * Power management discrepancy : GEN6_RP_INTERRUPT_LIMITS expected 00110000, was 16000000

( Recopié à la main )

( Qui était déjà apparu , parmi d'autres , précédemment )

EDIT
Une recherche google m'a amené à ce post ( les autres sont en anglais ) :
http://forum.ubuntu-fr.org/viewtopic.php?pid=13350661
où j'ai aussi vu comment faire apparaître le menu Grub ...

Il semble donc qu'il s'agit d'un bug de la dernière version du noyau .
https://bugs.launchpad.net/ubuntu/+sour … ug/1167669

Ceci ressemble également :
https://bugs.launchpad.net/ubuntu/+sour … ug/1168467
vu sur
http://forum.ubuntu-fr.org/viewtopic.php?pid=13334821

La solution est donc de démarrer sur une version antérieure
Ça a l'air de marcher pour le moment , j'attends toutefois encore un peu avant de passer en Résolu

Dernière modification par joe97 (Le 08/05/2013, à 16:10)

philoup44

Re : [Résolu] instabilité 12.04 après mise à jour

Salut
Concernant la MAJ de Linux 12.04
quelle est ta version de noyau ?

Pour connaître seulement la version du noyau

uname -r

il y a 2 versions de noyau sous 12.04
3.5.x-xx-generic
3.2.x-xx-generic
Lien vers Ubuntu 12.04.1 LTS
certains ont rencontrés des problèmes de MAJ avec le noyau 3.5.x.xx

joe97

Re : [Résolu] instabilité 12.04 après mise à jour

@philoup44
Il s'agit du noyau 3.2.0-40 sur l'ordinateur qui pose problème ( En 64 bits )
En revenant au 3.2.0-38 cela fonctionne sans problème

Quant au noyau 3.2.0-41 ( que j'ai sur mon ordinateur , celui où il y a problème n'étant pas le mien ) , il n'a pas été possible de l'installer sur l'ordinateur posant problème .
Le bug  que j'ai d'ailleurs concerne bien le noyau 3.2.0-40  :
https://bugs.launchpad.net/ubuntu/+sour … ug/1167669
Il n'y a plus qu'à attendre que ce bug soit corrigé ...

Comme L'ordinateur refonctionne , je passe le post en " Résolu"

Encore merci à tous !
Joel

Dernière modification par joe97 (Le 09/05/2013, à 11:13)

philoup44

Re : [Résolu] instabilité 12.04 après mise à jour

Pour l'instant, j'ai le noyau 3.2.0-41 (amd 64) et apparemment ,pas de souci pour l'instant
Je touche du bois