#1 Le 10/11/2006, à 23:43
- Ekinoks
[résolu][ATI][Edgy] Pas d'accélération 3D.
Salut !
je viens juste de faire l'update de ma Dapper pour passer a la Edgy. le problème est que je n'est plus d'accélération 3D avec ma radeon 9600 pro:'(
j'ai fait des recherche sur le net et j'ai lue qu'il fallait rajouter ca a xorg.conf :
Section "Extensions"
Option "Composite" "disable"
EndSection
se que j'ai fait mais ca ne marche toujours pas...
voici mon xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
Screen "aticonfig-Screen[1]" RightOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "àcran générique"
HorizSync 28.0 - 80.0
VertRefresh 43.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Carte vidéo générique"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "àcran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400" "640x350"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400" "640x350"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400" "640x350"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400" "640x350"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400" "640x350"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400" "640x350"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]"
Device "aticonfig-Device[1]"
Monitor "aticonfig-Monitor[1]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSection
La commande fglrxinfo me donne :
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
display: :0.0 screen: 1
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
la commande glxinfo|grep direct me donne :
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
la commande fgl_glxgears marche pas et me donne le message d'erreur suivant :
Using GLX_SGIX_pbuffer
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 142 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 35
Current serial number in output stream: 35
et la commande glxgears -printfps me donne des performance de seulement 200FPS
Quelqu'un sait d'ou es que le problème peu venir ?
Merci pour votre aide !
Dernière modification par Ekinoks (Le 11/11/2006, à 00:54)
Hors ligne
#2 Le 11/11/2006, à 00:53
- Ekinoks
Re : [résolu][ATI][Edgy] Pas d'accélération 3D.
Ok, j'ai trouver le problème, il fallait installer le linux-restricted-modules-2.6.17-10-generic...
si la 6.10 installer le noyau 2.6.17-10-generic d'origine, il n'installe pas par contre le restricted-modules...
Résolu
Hors ligne
#3 Le 20/10/2007, à 19:24
- chicheng
Re : [résolu][ATI][Edgy] Pas d'accélération 3D.
Hé, j'ai absolument rien compri à ta réponse...
Tu parles français? Il y a des programmes de logopédie gratuits si jamais.
Hors ligne
#4 Le 22/11/2007, à 22:01
- Compte anonymisé
Re : [résolu][ATI][Edgy] Pas d'accélération 3D.
Tapes ce qu'il cite dans Synaptic.
Il ne saurait être plus clair.
#5 Le 22/11/2007, à 22:16
- david92
Re : [résolu][ATI][Edgy] Pas d'accélération 3D.
Hé, j'ai absolument rien compri à ta réponse...
Tu parles français? Il y a des programmes de logopédie gratuits si jamais.
pppff lamentable, ce qu'il dit est compréhensible, après si tu n'as pas compris son explication, c'est tout autre chose
Hors ligne