Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 14/05/2013, à 09:46

tomhar

[RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Bonjour,

(problème résolu, au final on retient que le gestionnaire de pilote additionnels n'est pas aussi performant que souhaité, du moins dans ma config.)
En espérant que ce sujet serve à tous ceux qui en auront besoin...

Voilà ma config :
Acer 7741G
Mem 4GB
CG ATI Radeon 5650 (1GB)

Ubuntu 12.04 LTS

Le problème est que dans le menu des "pilotes additionnels", AUCUN pilote propriétaire n'est utilisé sur ce système.
J'ai évidemment suivi pas mal du tuto sur la question, notamment ça, ça, et ça ...


Voici le contenu du /var/log/Xorg.0.log

[    32.725] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    32.726] X Protocol Version 11, Revision 0
[    32.726] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[    32.726] Current Operating System: Linux alexandre-Aspire-7741 3.2.0-42-generic-pae #67-Ubuntu SMP Mon May 6 21:55:09 UTC 2013 i686
[    32.726] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-42-generic-pae root=UUID=8e051cc8-3e37-4c58-bc78-4c62e1908b00 ro quiet splash vt.handoff=7
[    32.726] Build Date: 11 April 2013  01:04:30PM
[    32.726] xorg-server 2:1.11.4-0ubuntu10.13 (For technical support please see http://www.ubuntu.com/support) 
[    32.726] Current version of pixman: 0.28.2
[    32.726] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    32.726] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    32.726] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 14 10:30:24 2013
[    33.111] (==) Using config file: "/etc/X11/xorg.conf"
[    33.111] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    33.207] (==) No Layout section.  Using the first Screen section.
[    33.207] (**) |-->Screen "Default Screen" (0)
[    33.207] (**) |   |-->Monitor "<default monitor>"
[    33.218] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[    33.218] (==) Automatically adding devices
[    33.218] (==) Automatically enabling devices
[    33.227] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    33.227] 	Entry deleted from font path.
[    33.227] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    33.227] 	Entry deleted from font path.
[    33.227] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    33.227] 	Entry deleted from font path.
[    33.237] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    33.237] 	Entry deleted from font path.
[    33.237] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    33.237] 	Entry deleted from font path.
[    33.237] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    33.237] 	Entry deleted from font path.
[    33.237] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    33.237] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    33.237] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    33.257] (II) Loader magic: 0xb77965a0
[    33.257] (II) Module ABI versions:
[    33.257] 	X.Org ANSI C Emulation: 0.4
[    33.257] 	X.Org Video Driver: 11.0
[    33.257] 	X.Org XInput driver : 16.0
[    33.257] 	X.Org Server Extension : 6.0
[    33.258] (--) PCI:*(0:2:0:0) 1002:68c1:1025:037e rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    33.258] (II) Open ACPI successful (/var/run/acpid.socket)
[    33.258] (II) "extmod" will be loaded by default.
[    33.258] (II) "dbe" will be loaded by default.
[    33.258] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    33.258] (II) "record" will be loaded by default.
[    33.258] (II) "dri" will be loaded by default.
[    33.258] (II) "dri2" will be loaded by default.
[    33.258] (II) LoadModule: "glx"
[    33.498] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[    33.543] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    33.543] 	compiled for 6.9.0, module version = 1.0.0
[    33.544] (II) Loading extension GLX
[    33.544] (II) LoadModule: "extmod"
[    33.567] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    33.575] (II) Module extmod: vendor="X.Org Foundation"
[    33.575] 	compiled for 1.11.3, module version = 1.0.0
[    33.575] 	Module class: X.Org Server Extension
[    33.575] 	ABI class: X.Org Server Extension, version 6.0
[    33.575] (II) Loading extension MIT-SCREEN-SAVER
[    33.575] (II) Loading extension XFree86-VidModeExtension
[    33.575] (II) Loading extension XFree86-DGA
[    33.576] (II) Loading extension DPMS
[    33.576] (II) Loading extension XVideo
[    33.576] (II) Loading extension XVideo-MotionCompensation
[    33.576] (II) Loading extension X-Resource
[    33.576] (II) LoadModule: "dbe"
[    33.576] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    33.598] (II) Module dbe: vendor="X.Org Foundation"
[    33.598] 	compiled for 1.11.3, module version = 1.0.0
[    33.598] 	Module class: X.Org Server Extension
[    33.598] 	ABI class: X.Org Server Extension, version 6.0
[    33.598] (II) Loading extension DOUBLE-BUFFER
[    33.598] (II) LoadModule: "record"
[    33.599] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    33.609] (II) Module record: vendor="X.Org Foundation"
[    33.609] 	compiled for 1.11.3, module version = 1.13.0
[    33.609] 	Module class: X.Org Server Extension
[    33.609] 	ABI class: X.Org Server Extension, version 6.0
[    33.609] (II) Loading extension RECORD
[    33.609] (II) LoadModule: "dri"
[    33.609] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    33.610] (II) Module dri: vendor="X.Org Foundation"
[    33.610] 	compiled for 1.11.3, module version = 1.0.0
[    33.610] 	ABI class: X.Org Server Extension, version 6.0
[    33.610] (II) Loading extension XFree86-DRI
[    33.610] (II) LoadModule: "dri2"
[    33.610] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    33.611] (II) Module dri2: vendor="X.Org Foundation"
[    33.611] 	compiled for 1.11.3, module version = 1.2.0
[    33.611] 	ABI class: X.Org Server Extension, version 6.0
[    33.611] (II) Loading extension DRI2
[    33.611] (==) Matched fglrx as autoconfigured driver 0
[    33.611] (==) Matched ati as autoconfigured driver 1
[    33.611] (==) Matched vesa as autoconfigured driver 2
[    33.611] (==) Matched fbdev as autoconfigured driver 3
[    33.611] (==) Assigned the driver to the xf86ConfigLayout
[    33.611] (II) LoadModule: "fglrx"
[    33.611] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[    33.842] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    33.842] 	compiled for 1.4.99.906, module version = 9.0.2
[    33.842] 	Module class: X.Org Video Driver
[    33.842] (II) Loading sub module "fglrxdrm"
[    33.842] (II) LoadModule: "fglrxdrm"
[    33.842] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    34.015] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    34.015] 	compiled for 1.4.99.906, module version = 9.0.2
[    34.048] (II) LoadModule: "ati"
[    34.048] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    34.061] (II) Module ati: vendor="X.Org Foundation"
[    34.061] 	compiled for 1.11.3, module version = 6.14.99
[    34.061] 	Module class: X.Org Video Driver
[    34.061] 	ABI class: X.Org Video Driver, version 11.0
[    34.061] (II) LoadModule: "radeon"
[    34.062] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    34.097] (II) Module radeon: vendor="X.Org Foundation"
[    34.097] 	compiled for 1.11.3, module version = 6.14.99
[    34.097] 	Module class: X.Org Video Driver
[    34.097] 	ABI class: X.Org Video Driver, version 11.0
[    34.098] (II) LoadModule: "vesa"
[    34.098] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    34.105] (II) Module vesa: vendor="X.Org Foundation"
[    34.105] 	compiled for 1.11.3, module version = 2.3.0
[    34.105] 	Module class: X.Org Video Driver
[    34.105] 	ABI class: X.Org Video Driver, version 11.0
[    34.105] (II) LoadModule: "fbdev"
[    34.105] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    34.106] (II) Module fbdev: vendor="X.Org Foundation"
[    34.106] 	compiled for 1.11.3, module version = 0.4.2
[    34.106] 	ABI class: X.Org Video Driver, version 11.0
[    34.106] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[    34.106] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11                              
[    34.106] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:13
[    34.106] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
[    34.109] (II) VESA: driver for VESA chipsets: vesa
[    34.109] (II) FBDEV: driver for framebuffer: fbdev
[    34.109] (++) using VT number 7

[    34.109] (WW) Falling back to old probe method for fglrx
[    34.442] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    34.877] ukiDynamicMajor: found major device number 249
[    35.019] (--) Assigning device section with no busID to primary device
[    35.019] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[    35.019] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[    35.062] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    35.122] (II) AMD Video driver is signed
[    35.122] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[    35.122] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    35.122] (II) fglrx(0): pEnt->device->identifier=0xb77466bf
[    35.122] (WW) Falling back to old probe method for vesa
[    35.122] (WW) Falling back to old probe method for fbdev
[    35.122] (II) Loading sub module "fbdevhw"
[    35.122] (II) LoadModule: "fbdevhw"
[    35.123] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    35.540] (II) Module fbdevhw: vendor="X.Org Foundation"
[    35.540] 	compiled for 1.11.3, module version = 0.0.2
[    35.541] 	ABI class: X.Org Video Driver, version 11.0
[    35.541] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    35.541] (II) Loading sub module "vgahw"
[    35.541] (II) LoadModule: "vgahw"
[    35.541] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    35.617] (II) Module vgahw: vendor="X.Org Foundation"
[    35.617] 	compiled for 1.11.3, module version = 0.1.0
[    35.617] 	ABI class: X.Org Video Driver, version 11.0
[    35.617] (II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[    35.617] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    35.617] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    35.618] (==) fglrx(0): Default visual is TrueColor
[    35.618] (==) fglrx(0): RGB weight 888
[    35.618] (II) fglrx(0): Using 8 bits per RGB 
[    35.618] (==) fglrx(0): Buffer Tiling is ON
[    35.654] (II) Loading sub module "fglrxdrm"
[    35.654] (II) LoadModule: "fglrxdrm"
[    35.655] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    35.655] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    35.655] 	compiled for 1.4.99.906, module version = 9.0.2
[    35.744] ukiDynamicMajor: found major device number 249
[    35.744] ukiDynamicMajor: found major device number 249
[    35.744] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    35.744] ukiOpenDevice: node name is /dev/ati/card0
[    35.744] ukiOpenDevice: open result is 11, (OK)
[    36.371] ukiOpenByBusid: ukiOpenMinor returns 11
[    36.372] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    36.372] (**) fglrx(0): NoAccel = NO
[    36.372] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    36.372] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series " (Chipset = 0x68c1)
[    36.372] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x037e)
[    36.372] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    36.372] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    36.372] (--) fglrx(0): MMIO registers at 0xcfee0000
[    36.372] (--) fglrx(0): I/O port at 0x00002000
[    36.372] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    36.526] (II) fglrx(0): ATIF platform detected
[    36.526] (II) fglrx(0): AC Adapter is used
[    36.754] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    36.764] (II) Loading sub module "vbe"
[    36.764] (II) LoadModule: "vbe"
[    36.788] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    36.797] (II) Module vbe: vendor="X.Org Foundation"
[    36.797] 	compiled for 1.11.3, module version = 1.1.0
[    36.797] 	ABI class: X.Org Video Driver, version 11.0
[    36.797] (II) fglrx(0): VESA BIOS detected
[    36.798] (II) fglrx(0): VESA VBE Version 3.0
[    36.798] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    36.798] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    36.798] (II) fglrx(0): VESA VBE OEM Software Rev: 12.19
[    36.798] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    36.798] (II) fglrx(0): VESA VBE OEM Product: MADISON
[    36.798] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    36.798] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    36.798] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    36.798] (II) fglrx(0): PCIE card detected
[    36.798] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    36.798] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    36.798] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    36.798] (II) fglrx(0): RandR 1.2 support is enabled!
[    36.798] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    36.798] (==) fglrx(0): Center Mode is disabled 
[    36.798] (II) Loading sub module "fb"
[    36.798] (II) LoadModule: "fb"
[    36.798] (II) Loading /usr/lib/xorg/modules/libfb.so
[    36.875] (II) Module fb: vendor="X.Org Foundation"
[    36.875] 	compiled for 1.11.3, module version = 1.0.0
[    36.875] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    36.875] (II) Loading sub module "ddc"
[    36.875] (II) LoadModule: "ddc"
[    36.875] (II) Module "ddc" already built-in
[    37.158] (II) fglrx(0): Output LVDS has no monitor section
[    37.158] (II) fglrx(0): Output DFP1 has no monitor section
[    37.158] (II) fglrx(0): Output CRT1 has no monitor section
[    37.158] (II) Loading sub module "ddc"
[    37.158] (II) LoadModule: "ddc"
[    37.158] (II) Module "ddc" already built-in
[    37.158] (II) fglrx(0): Connected Display0: LVDS
[    37.158] (II) fglrx(0):  Display0: Failed to get EDID information. 
[    37.159] (II) fglrx(0): EDID for output LVDS
[    37.159] (II) fglrx(0): Manufacturer: AUO  Model: 109e  Serial#: 0
[    37.159] (II) fglrx(0): Year: 2008  Week: 1
[    37.159] (II) fglrx(0): EDID Version: 1.3
[    37.159] (II) fglrx(0): Digital Display Input
[    37.159] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    37.159] (II) fglrx(0): Gamma: 2.20
[    37.159] (II) fglrx(0): No DPMS capabilities specified
[    37.159] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    37.159] (II) fglrx(0): First detailed timing is preferred mode
[    37.159] (II) fglrx(0): redX: 0.610 redY: 0.355   greenX: 0.333 greenY: 0.610
[    37.159] (II) fglrx(0): blueX: 0.152 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[    37.159] (II) fglrx(0): Manufacturer's mask: 0
[    37.159] (II) fglrx(0): Supported detailed timing:
[    37.159] (II) fglrx(0): clock: 110.4 MHz   Image Size:  382 x 214 mm
[    37.159] (II) fglrx(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2000 h_border: 0
[    37.159] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 920 v_border: 0
[    37.159] (II) fglrx(0): Unknown vendor-specific block f
[    37.159] (II) fglrx(0):  AUO
[    37.159] (II) fglrx(0):  B173RW01 V0
[    37.159] (II) fglrx(0): EDID (in hex):
[    37.159] (II) fglrx(0): 	00ffffffffffff0006af9e1000000000
[    37.159] (II) fglrx(0): 	01120103802615780a45259c5b559c27
[    37.159] (II) fglrx(0): 	19505400000001010101010101010101
[    37.159] (II) fglrx(0): 	010101010101202b409061841430402a
[    37.159] (II) fglrx(0): 	33007ed6100000180000000f00000000
[    37.159] (II) fglrx(0): 	00000000000000000020000000fe0041
[    37.159] (II) fglrx(0): 	554f0a202020202020202020000000fe
[    37.159] (II) fglrx(0): 	004231373352573031205630200a00bb
[    37.159] (II) fglrx(0): EDID vendor "AUO", prod id 4254
[    37.159] (II) fglrx(0): Printing DDC gathered Modelines:
[    37.159] (II) fglrx(0): Modeline "1600x900"x0.0  110.40  1600 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Printing probed modes for output LVDS
[    37.159] (II) fglrx(0): Modeline "1600x900"x60.0  110.40  1600 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "1440x900"x60.0  110.40  1440 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "1280x768"x60.0  110.40  1280 1664 1706 2000  768 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "1280x720"x60.0  110.40  1280 1664 1706 2000  720 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "1024x768"x60.0  110.40  1024 1664 1706 2000  768 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "1024x600"x60.0  110.40  1024 1664 1706 2000  600 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "800x600"x60.0  110.40  800 1664 1706 2000  600 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "800x480"x60.0  110.40  800 1664 1706 2000  480 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): Modeline "640x480"x60.0  110.40  640 1664 1706 2000  480 903 906 920 -hsync -vsync (55.2 kHz)
[    37.159] (II) fglrx(0): EDID for output DFP1
[    37.159] (II) fglrx(0): EDID for output CRT1
[    37.159] (II) fglrx(0): Output LVDS connected
[    37.159] (II) fglrx(0): Output DFP1 disconnected
[    37.159] (II) fglrx(0): Output CRT1 disconnected
[    37.159] (II) fglrx(0): Using exact sizes for initial modes
[    37.159] (II) fglrx(0): Output LVDS using initial mode 1600x900
[    37.159] (II) fglrx(0): Display dimensions: (380, 210) mm
[    37.159] (II) fglrx(0): DPI set to (106, 108)
[    37.159] (II) fglrx(0): Eyefinity capable adapter detected.
[    37.159] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 Series  has 6 configurable heads and 1 displays connected.
[    37.159] (==) fglrx(0):  PseudoColor visuals disabled
[    37.159] (II) Loading sub module "ramdac"
[    37.159] (II) LoadModule: "ramdac"
[    37.159] (II) Module "ramdac" already built-in
[    37.159] (==) fglrx(0): NoDRI = NO
[    37.160] (==) fglrx(0): Capabilities: 0x00000000
[    37.160] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    37.160] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    37.160] (==) fglrx(0): UseFastTLS=0
[    37.160] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    37.160] (II) UnloadModule: "radeon"
[    37.160] (II) Unloading radeon
[    37.160] (II) UnloadModule: "vesa"
[    37.160] (II) Unloading vesa
[    37.160] (II) UnloadModule: "fbdev"
[    37.160] (II) Unloading fbdev
[    37.160] (II) UnloadModule: "fbdevhw"
[    37.160] (II) Unloading fbdevhw
[    37.160] (--) Depth 24 pixmap format is 32 bpp
[    37.161] (II) Loading extension ATIFGLRXDRI
[    37.161] (II) fglrx(0): doing swlDriScreenInit
[    37.161] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    37.161] ukiDynamicMajor: found major device number 249
[    37.161] ukiDynamicMajor: found major device number 249
[    37.161] ukiDynamicMajor: found major device number 249
[    37.161] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    37.161] ukiOpenDevice: node name is /dev/ati/card0
[    37.161] ukiOpenDevice: open result is 16, (OK)
[    37.161] ukiOpenByBusid: ukiOpenMinor returns 16
[    37.161] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    37.161] (II) fglrx(0): [uki] DRM interface version 1.0
[    37.162] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[    37.162] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    37.162] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb63f7000
[    37.162] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    37.162] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    37.162] (II) fglrx(0): swlDriScreenInit done
[    37.162] (II) fglrx(0): Kernel Module Version Information:
[    37.162] (II) fglrx(0):     Name: fglrx
[    37.162] (II) fglrx(0):     Version: 9.0.2
[    37.162] (II) fglrx(0):     Date: Sep 20 2012
[    37.162] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    37.162] (II) fglrx(0): Kernel Module version matches driver.
[    37.162] (II) fglrx(0): Kernel Module Build Time Information:
[    37.162] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-42-generic-pae
[    37.162] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    37.162] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    37.162] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    37.162] (II) fglrx(0): [uki] register handle = 0x00004000
[    37.198] (II) fglrx(0): DRI initialization successfull
[    37.228] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    37.423] (==) fglrx(0): Backing store disabled
[    37.428] (II) Loading extension FGLRXEXTENSION
[    37.428] (==) fglrx(0): DPMS enabled
[    37.429] (II) fglrx(0): Initialized in-driver Xinerama extension
[    37.429] (**) fglrx(0): Textured Video is enabled.
[    37.429] (II) LoadModule: "glesx"
[    37.429] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[    37.908] (II) Module glesx: vendor="X.Org Foundation"
[    37.908] 	compiled for 1.4.99.906, module version = 1.0.0
[    37.908] (II) Loading extension GLESX
[    37.908] (II) fglrx(0): GLESX enableFlags = 592
[    37.909] (II) fglrx(0): GLESX is enabled
[    37.909] (II) LoadModule: "amdxmm"
[    37.909] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[    37.925] (II) Module amdxmm: vendor="X.Org Foundation"
[    37.925] 	compiled for 1.4.99.906, module version = 2.0.0
[    37.934] (II) Loading extension AMDXVOPL
[    37.934] (II) Loading extension AMDXVBA
[    37.953] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    37.954] (II) fglrx(0): Enable composite support successfully
[    37.955] (II) fglrx(0): X context handle = 0x1
[    37.955] (II) fglrx(0): [DRI] installation complete
[    37.955] (==) fglrx(0): Silken mouse enabled
[    37.955] (==) fglrx(0): Using HW cursor of display infrastructure!
[    37.955] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    37.955] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    37.955] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    38.939] (--) RandR disabled
[    38.939] (II) Initializing built-in extension Generic Event Extension
[    38.939] (II) Initializing built-in extension SHAPE
[    38.939] (II) Initializing built-in extension MIT-SHM
[    38.939] (II) Initializing built-in extension XInputExtension
[    38.939] (II) Initializing built-in extension XTEST
[    38.939] (II) Initializing built-in extension BIG-REQUESTS
[    38.939] (II) Initializing built-in extension SYNC
[    38.939] (II) Initializing built-in extension XKEYBOARD
[    38.939] (II) Initializing built-in extension XC-MISC
[    38.939] (II) Initializing built-in extension SECURITY
[    38.939] (II) Initializing built-in extension XINERAMA
[    38.939] (II) Initializing built-in extension XFIXES
[    38.939] (II) Initializing built-in extension RENDER
[    38.939] (II) Initializing built-in extension RANDR
[    38.939] (II) Initializing built-in extension COMPOSITE
[    38.939] (II) Initializing built-in extension DAMAGE
[    39.027] ukiDynamicMajor: found major device number 249
[    39.028] ukiDynamicMajor: found major device number 249
[    39.028] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    39.028] ukiOpenDevice: node name is /dev/ati/card0
[    39.028] ukiOpenDevice: open result is 18, (OK)
[    39.028] ukiOpenByBusid: ukiOpenMinor returns 18
[    39.028] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    39.885] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    39.892] (II) fglrx(0): Setting screen physical size to 423 x 238
[    40.096] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    40.128] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    40.128] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    40.128] (II) LoadModule: "evdev"
[    40.129] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.165] (II) Module evdev: vendor="X.Org Foundation"
[    40.165] 	compiled for 1.11.3, module version = 2.7.0
[    40.165] 	Module class: X.Org XInput Driver
[    40.165] 	ABI class: X.Org XInput driver, version 16.0
[    40.165] (II) Using input driver 'evdev' for 'Power Button'
[    40.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.165] (**) Power Button: always reports core events
[    40.165] (**) evdev: Power Button: Device: "/dev/input/event2"
[    40.166] (--) evdev: Power Button: Vendor 0 Product 0x1
[    40.166] (--) evdev: Power Button: Found keys
[    40.166] (II) evdev: Power Button: Configuring as keyboard
[    40.166] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    40.166] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    40.166] (**) Option "xkb_rules" "evdev"
[    40.166] (**) Option "xkb_model" "pc105"
[    40.166] (**) Option "xkb_layout" "fr"
[    40.166] (**) Option "xkb_variant" "latin9"
[    40.168] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    40.185] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    40.185] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    40.185] (II) Using input driver 'evdev' for 'Video Bus'
[    40.185] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.185] (**) Video Bus: always reports core events
[    40.185] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    40.185] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    40.185] (--) evdev: Video Bus: Found keys
[    40.185] (II) evdev: Video Bus: Configuring as keyboard
[    40.185] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event6"
[    40.185] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    40.185] (**) Option "xkb_rules" "evdev"
[    40.185] (**) Option "xkb_model" "pc105"
[    40.185] (**) Option "xkb_layout" "fr"
[    40.185] (**) Option "xkb_variant" "latin9"
[    40.186] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    40.186] (II) No input driver specified, ignoring this device.
[    40.186] (II) This device may have been added with another device file.
[    40.186] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    40.186] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    40.186] (II) Using input driver 'evdev' for 'Sleep Button'
[    40.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.186] (**) Sleep Button: always reports core events
[    40.186] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    40.186] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    40.186] (--) evdev: Sleep Button: Found keys
[    40.186] (II) evdev: Sleep Button: Configuring as keyboard
[    40.186] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    40.186] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    40.186] (**) Option "xkb_rules" "evdev"
[    40.186] (**) Option "xkb_model" "pc105"
[    40.186] (**) Option "xkb_layout" "fr"
[    40.186] (**) Option "xkb_variant" "latin9"
[    40.187] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[    40.187] (II) No input driver specified, ignoring this device.
[    40.187] (II) This device may have been added with another device file.
[    40.187] (II) config/udev: Adding input device RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ (/dev/input/event4)
[    40.187] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Applying InputClass "evdev keyboard catchall"
[    40.187] (II) Using input driver 'evdev' for 'RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ'
[    40.187] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.187] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: always reports core events
[    40.187] (**) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Device: "/dev/input/event4"
[    40.187] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Vendor 0xffff Product 0xffff
[    40.187] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found keys
[    40.187] (II) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Configuring as keyboard
[    40.187] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4/event4"
[    40.187] (II) XINPUT: Adding extended input device "RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ" (type: KEYBOARD, id 9)
[    40.187] (**) Option "xkb_rules" "evdev"
[    40.187] (**) Option "xkb_model" "pc105"
[    40.187] (**) Option "xkb_layout" "fr"
[    40.187] (**) Option "xkb_variant" "latin9"
[    40.188] (II) config/udev: Adding input device RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ (/dev/input/event5)
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Applying InputClass "evdev pointer catchall"
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Applying InputClass "evdev keyboard catchall"
[    40.188] (II) Using input driver 'evdev' for 'RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ'
[    40.188] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: always reports core events
[    40.188] (**) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Device: "/dev/input/event5"
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Vendor 0xffff Product 0xffff
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found 9 mouse buttons
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found scroll wheel(s)
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found relative axes
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found x and y relative axes
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found absolute axes
[    40.188] (II) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Forcing absolute x/y axes to exist.
[    40.188] (--) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Found keys
[    40.188] (II) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Configuring as mouse
[    40.188] (II) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Configuring as keyboard
[    40.188] (II) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: Adding scrollwheel support
[    40.188] (**) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: YAxisMapping: buttons 4 and 5
[    40.188] (**) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    40.188] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5/event5"
[    40.188] (II) XINPUT: Adding extended input device "RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ" (type: KEYBOARD, id 10)
[    40.188] (**) Option "xkb_rules" "evdev"
[    40.188] (**) Option "xkb_model" "pc105"
[    40.188] (**) Option "xkb_layout" "fr"
[    40.188] (**) Option "xkb_variant" "latin9"
[    40.188] (II) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: initialized for relative axes.
[    40.188] (WW) evdev: RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: ignoring absolute axes.
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: (accel) keeping acceleration scheme 1
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: (accel) acceleration profile 0
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: (accel) acceleration factor: 2.000
[    40.188] (**) RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ: (accel) acceleration threshold: 4
[    40.189] (II) config/udev: Adding input device RAPOO ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ (/dev/input/mouse0)
[    40.189] (II) No input driver specified, ignoring this device.
[    40.189] (II) This device may have been added with another device file.
[    40.189] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[    40.189] (II) No input driver specified, ignoring this device.
[    40.189] (II) This device may have been added with another device file.
[    40.189] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[    40.189] (II) No input driver specified, ignoring this device.
[    40.189] (II) This device may have been added with another device file.
[    40.189] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event10)
[    40.189] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[    40.189] (II) Using input driver 'evdev' for '1.3M WebCam'
[    40.189] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.189] (**) 1.3M WebCam: always reports core events
[    40.189] (**) evdev: 1.3M WebCam: Device: "/dev/input/event10"
[    40.189] (--) evdev: 1.3M WebCam: Vendor 0x4f2 Product 0xb1d8
[    40.189] (--) evdev: 1.3M WebCam: Found keys
[    40.189] (II) evdev: 1.3M WebCam: Configuring as keyboard
[    40.189] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input10/event10"
[    40.189] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 11)
[    40.189] (**) Option "xkb_rules" "evdev"
[    40.189] (**) Option "xkb_model" "pc105"
[    40.190] (**) Option "xkb_layout" "fr"
[    40.190] (**) Option "xkb_variant" "latin9"
[    40.190] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    40.190] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    40.190] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    40.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.190] (**) AT Translated Set 2 keyboard: always reports core events
[    40.190] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    40.190] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    40.190] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    40.190] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    40.190] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    40.190] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    40.190] (**) Option "xkb_rules" "evdev"
[    40.190] (**) Option "xkb_model" "pc105"
[    40.190] (**) Option "xkb_layout" "fr"
[    40.190] (**) Option "xkb_variant" "latin9"
[    40.191] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event8)
[    40.191] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    40.191] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    40.191] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.191] (**) PS/2 Mouse: always reports core events
[    40.191] (**) evdev: PS/2 Mouse: Device: "/dev/input/event8"
[    40.191] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    40.191] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    40.191] (--) evdev: PS/2 Mouse: Found relative axes
[    40.191] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    40.191] (II) evdev: PS/2 Mouse: Configuring as mouse
[    40.191] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    40.191] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    40.191] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[    40.191] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 13)
[    40.191] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    40.191] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    40.191] (**) PS/2 Mouse: (accel) acceleration profile 0
[    40.191] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    40.191] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    40.191] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[    40.191] (II) No input driver specified, ignoring this device.
[    40.191] (II) This device may have been added with another device file.
[    40.192] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event9)
[    40.192] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    40.192] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    40.192] (II) LoadModule: "synaptics"
[    40.192] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    40.222] (II) Module synaptics: vendor="X.Org Foundation"
[    40.222] 	compiled for 1.11.3, module version = 1.6.2
[    40.222] 	Module class: X.Org XInput Driver
[    40.222] 	ABI class: X.Org XInput driver, version 16.0
[    40.222] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    40.222] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    40.222] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    40.222] (**) Option "Device" "/dev/input/event9"
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    40.232] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    40.232] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    40.232] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    40.236] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[    40.236] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 14)
[    40.236] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    40.236] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    40.236] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.082
[    40.236] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    40.236] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    40.236] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    40.236] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    40.236] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    40.236] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[    40.236] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    40.238] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event7)
[    40.238] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    40.238] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    40.238] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.238] (**) Acer WMI hotkeys: always reports core events
[    40.238] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event7"
[    40.238] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    40.238] (--) evdev: Acer WMI hotkeys: Found keys
[    40.238] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    40.238] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    40.238] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[    40.238] (**) Option "xkb_rules" "evdev"
[    40.238] (**) Option "xkb_model" "pc105"
[    40.238] (**) Option "xkb_layout" "fr"
[    40.238] (**) Option "xkb_variant" "latin9"
[    40.265] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    45.867] (II) fglrx(0): EDID vendor "AUO", prod id 4254
[    45.867] (II) fglrx(0): Printing DDC gathered Modelines:
[    45.867] (II) fglrx(0): Modeline "1600x900"x0.0  110.40  1600 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)
[    56.512] (II) fglrx(0): EDID vendor "AUO", prod id 4254
[    56.512] (II) fglrx(0): Printing DDC gathered Modelines:
[    56.512] (II) fglrx(0): Modeline "1600x900"x0.0  110.40  1600 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)
[    61.918] (II) fglrx(0): EDID vendor "AUO", prod id 4254
[    61.918] (II) fglrx(0): Printing DDC gathered Modelines:
[    61.918] (II) fglrx(0): Modeline "1600x900"x0.0  110.40  1600 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)
[    66.614] (II) XKB: reuse xkmfile /var/lib/xkb/server-518754FAB1FA320CD11E67E5F27005732682D4B3.xkm
[    76.317] (II) fglrx(0): EDID vendor "AUO", prod id 4254
[    76.317] (II) fglrx(0): Printing DDC gathered Modelines:
[    76.317] (II) fglrx(0): Modeline "1600x900"x0.0  110.40  1600 1664 1706 2000  900 903 906 920 -hsync -vsync (55.2 kHz)

Quant au  /etc/X11/xorg.conf

Section "Screen"
	Identifier	"Default Screen"
	DefaultDepth	24
EndSection

Section "Module"
	Load	"glx"
EndSection

Qu'en pensez-vous ?

Merci ;)

Dernière modification par tomhar (Le 15/05/2013, à 09:40)


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#2 Le 14/05/2013, à 10:20

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Salut,

Donne le retour de fglrxinfo. Si installé, comment as-tu installé le pilote proprio?

#3 Le 14/05/2013, à 10:38

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Salut,

merci de ton aide Faucon ;

Le retour de fglrxinfo :

display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Mobility Radeon HD 5000 Series 
OpenGL version string: 4.2.11903 Compatibility Profile Context

Au passage, si tu peux en traduire ta lecture, vous demandez tous ça, des "donne le retour de ...", puis après ça tombe du ciel "ah ouais, fais ça, et ça ...!!"

A la question "comment ai-je installé le pilote proprio ?", je ne sais pas que répondre, j'ai du y parvenir en suivant les suggestions de "pilotes additionnels" ou "gestionnaire synaptec" ou invit de commande d'après les tutos...

grrr !

Dernière modification par tomhar (Le 14/05/2013, à 10:40)


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#4 Le 14/05/2013, à 10:54

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Ok le pilote est installé mais fais cette commande et poste le contenu du nouveau xorg.conf qui pour le moment n'est pas configuré, d'où le problème:

sudo aticonfig --initial -f

#5 Le 14/05/2013, à 11:06

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Ok, j'ai fait la commande.

Voici le nouveau xorg.conf

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Ya bon ?...


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#6 Le 14/05/2013, à 11:11

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Extra, veille qu'il soit bien nommé xorg.conf et dans le dossier /etc/X11/ puis reboot.

#7 Le 14/05/2013, à 11:24

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Mouais...

Alors disons que l'affichage du bureau est beaucoup plus rapide à l'allumage.

Par ailleurs, le gestionnaire de pilotes additionnels notifie encore que "aucun pilote proprio n'est utilisé sur ce système.

Mais si tu me dis que tout est à jour, bonne version avec bonne CG,et bon Ubuntu ... alors !

En tout cas merci beaucoup Faucon !


Et pour finir (mais je vais p-être aller poster ailleurs, meilleure rubrique), je tente de corriger un problème de lenteur, en particulier sur Internet. Voilà, c'était aussi pour ça que je me battais avec le pilote Carte Graphique. Est-ce la bonne bataille ?

Tomhar


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#8 Le 14/05/2013, à 11:55

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Tape fgl_glxgears et dit moi ce qui se passe puis gksudo amdcccle et enfin aticonfig pour voir si il ne renvoi pas une erreur. Du gestionnaire on s'en balance.

#9 Le 14/05/2013, à 20:25

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Hey, désolé pour l'absence...

Alors, pour fgl_glxgears : un cube avec des engrenages vert, rouge et bleus, ça tourne en tous sens.

gksudo amdcccle m'ouvre le Catalyst Control Center

et, aticonfig donne

you know the capabilities of your monitor before changing this option.
        Screens start at 0.  You can use 1 for dual-head
  --hsync2=LOW-HIGH
        Change the horizontal sync range of the second display.  Make sure you
        know the capabilities of your monitor before changing this option.
  --vrefresh2=LOW-HIGH
        Change the vertical refresh range of the second display.  Make sure you
        know the capabilities of your monitor before changing this option.
  --mode2=W1xH1,W2XH2,W3xH3,...
        Change the modes for the second display.  You may specify several
        resolutions separated by commas.  Only valid for clone and big desktop
        settings.
  --screen-layout={left|right|above|below}
        Set the secondary screen position for dual head.
  --screen-overlap=NUM
        Set the screen overlap region in big desktop mode to be NUM pixels.
Advanced Options:
  --sync-video={on|off}
        Enable/disable sync to vsync for AVIVO video.
        This option is enabled by default and is used to prevent
        video tearing. By disabling this option video is free to
        render as fast as the 3D engine can handle. In the case of
        choppy video try to disable sync-video.
  --tls={on|off}
        Enable/disable fast thread local storage.  Disable this option when
        virtual machines or WineX fail to work properly.
  --locked-userpages={on|off}
        Enable/disable locked user pages. Disable this option if the system
        hangs when running fgl_glxgears.
        User page lock is no longer available on AGP system now.
  --max-gart-size=VALUE1,VALUE2
        Set user-defined max total GART size(VALUE1) and cacheable gart
        size(VALUE2) for non-AGP systems.
        This option can combined with --adapter option to set the gart size
        for individual card. 

Dynamic Display Management Options:
  Following options will not change the config file. They are
  used for querying driver, controller and adaptor information.
  These options will be effective immediately. Other options on 
  the same command line will be ignored.
  --enable-monitor=STRING,STRING
        Setting current monitor to be enabled. Only 2 displays
        can be enabled at the same time. Any displays
        that are not on the list will be disabled.
        STRING can be one of the following set, separated 
        by commas:
            none
            crt1
            crt2
            lvds
            tv
            cv
            tmds1
            tmds2
            tmds2i
            dfp3
            dfp4
            dfp5
            dfp6
            auto   -- use default policy to enable the displays.
  --query-monitor
        This will return connected and enabled monitor information
  --swap-monitor
        This only works for big desktop setup. This will swap the
        contents on the two monitors.
  --swap-screens={on|off}
        Enable/disable swap heads in dual-head mode.
        This option works only in dual-head mode.

Pair mode options: 
  Following options are used for query add and remove pair modes. 
  These options will be effective immediately. Other options on   
  the same command line will be ignored.
  --list-pairmode 
        list all the current existing pair modes the driver can use.
  --add-pairmode=width0xheight0+width1xheight1
        Add one pair mode to the list. width0 and height0 are the 
        size of primary display and width1 and height1 for the 
        secondary  display.
  --remove-pairmode=index 
        Remove one pair mode from the list. User can get index by 
        list-pairmode.

External Events Daemon Options:
  Following options will not change the config file. They are
  used to send commands to the atieventsd external events daemon.
  --set-policy=STRING
        Sets the event policy for the daemon to be STRING.
        See the atieventsd(8) manpage for further details.

Display attribute options:
  Following options are used for query and set adjustment of 
  specific attribute for specific display. These options will be 
  effective immediately. Other options on the same command line 
  will be ignored.
  The DISPLAYTYPE in options can be one of the following strings:
        crt1,  lvds,   tv,   cv,   tmds1, crt2,
        tmds2, tmds2i, dfp3, dfp4, dfp5,  dfp6 .
   The ATTRIBTYPE in options can be one of the following strings:
        brightness, contrast, saturation, hue, positionX, 
        positionY, sizeX, sizeY, overscan, videoStandard  
  --query-dispattrib=DISPLAYTYPE,ATTRIBTYPE 
        query the specific adjustment info of the specific display.
        if ATTRIBTYPE is not specified, all supported attribute 
        information will be printed out. 
  --set-dispattrib=DISPLAYTYPE,ATTRIBTYPE:VALUE 
        set the attribute value of the specific display.

Connector type options:
  Following options are used for query connector type 
  for specific display. These options will be 
  effective immediately. Other options on the same command line 
  will be ignored.
  The DISPLAYTYPE in options can be one of the following strings:
        crt1,  lvds,   tv,   cv,   tmds1, crt2,
        tmds2, tmds2i, dfp3, dfp4, dfp5,  dfp6 .
   --query-connectortype=DISPLAYTYPE 
        query the connector type of the specific display.

Component video dongle options:
  Following options are used for query and set dongles for a 
  component video. These options will be effective immediately.
  Other options on the same command line will be ignored.
  --query-cvdongle
        query dongle setting informations of the component video.
  --set-cvdongle=VALUE
        set the custom override value of the CV dongle. 
  --reset-cvdongle
        reset the custom override setting(to zero)of the CV dongle.

Component video customized mode options:
  Following options are used for query and set customized mode for
  component video. These options will be effective immediately.
  Other options on the same command line will be ignored.
  --query-cvmode
        query customized modes for component video.
  --add-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEDHEIGHT,REFRESH.
        add a customized mode for component video.
  --validate-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEHEIGHT,REFRESH.
        validate a customized mode for component video.
  --delete-cvmode=INDEX 
        delete one customized mode for component video. 

Persistent Configuration Store (PCS) Options:
  Following options will not change the config file. They are
  used to manipulate the PCS database.  Due to their nature, these.
  commands may only be run by the root user. Note that the prefix
  and key names are not case-sensitive.
  --get-pcs-key=PREFIX,KEY
        Prints out the specified prefix and key from the PCS
        database.  The type of data will be shown along with
        the contents.
  --set-pcs-u32=PREFIX,KEY,VALUE
  --set-pcs-val=PREFIX,KEY,VALUE (deprecated)
        Sets an integer value at the specified prefix and key in
        the PCS database.  The value may be specified in hex by
        prefixing it with 0x or in octal by prefixing it with 0,
        otherwise the value is assumed to be in decimal.  Note
        that --set-pcs-val is deprecated and --set-pcs-u32 should
        be used instead.  --set-pcs-val will be removed soon.
  --set-pcs-u32array=PREFIX,KEY,VALUE[,VALUE]...
        Sets an array of integer values at the specified prefix
        and key in the PCS database.  The values may be specified
        in hex by prefixing it with 0x or in octal by prefixing
        it with 0, otherwise the value is assumed to be in decimal.
        (e.g. --set-pcs-u32array="TestSection,TestData,1,0x2,3")
  --set-pcs-str=PREFIX,KEY,STRING
        Sets a string value at the specified prefix and key in
        the PCS database.
  --set-pcs-raw=PREFIX,KEY,HEXSTRING
        Sets a raw binary value at the specified prefix and key in
        the PCS database.  The value is specified as a series of
        hex bytes with no 0x or spaces.
        (e.g. --set-pcs-raw="TestSection,TestData,E84C0E" sets 3 bytes)
  --set-pcs-bool=PREFIX,KEY,VALUE
        Sets a boolean value at the specified prefix and key in
        the PCS database.  The value may be specified as either
        "true", "yes", "on", "enable" or "1" meaning boolean TRUE or
        "false", "no", "off", "disable" or "0" meaning boolean FALSE.
  --del-pcs-key=PREFIX,KEY
        Deletes the specified prefix and key from the PCS database.

Multiple display adapter options:
  Following options are used for querying and setting up multiple
  display adapters that are installed for multihead or Crossfire
  configurations.
  --lsa, --list-adapters
        Lists all detected and supported display adapters.
        The default adapter (used when --adapter is not specified)
        will be indicated with a "*" next to it.
  --adapter=ADAPTERLIST
        Selects which adapters returned by --list-adapters should
        be affected by other aticonfig options.  ADAPTERLIST contains
        either a comma-seperated sequence of the index numbers of the
        adapters to be affected or else contains the keyword "all" to
        select all the adapters.  If --adapter is missing, only the
        default adapter will be affected.
  --lscc, --list-crossfire-candidates
        Queries the driver to determine the pool of available devices that can
        can be chained together for CrossFire.
  --lscs, --list-crossfire-status
        List current Crossfire status (enabled or disabled) along with diagnostics
        information indicates the status of your system
  --lsch, --list-mgpu-chains
        Lists the MGPU chains that are currently defined along with their
        enabled state
  --cfa, --add-crossfire-chain
        Defines a new CrossFire chain.  --adapter should contain the adapter
        chain definition, with the master adapter being the first entry and
        the slave adapters being the subsequent entries in order of priority.
  --cfd, --delete-crossfire-chain
        Delete and existing defined CrossFire chain.  --adapter should list the
        master adapters of the chains to be deleted.  --adapter=all will delete
        all chain definitions.
  --cf, --crossfire={on|off}
        Enables/disables CrossFire support on the currently defined CrossFire
        chains.  --adapter should list the master adapters to be enabled or
        disabled.
  --cfl, --crossfire-logo={on|off}
        Enables/disables the appearance of the CrossFire Logo when rendering
        in CrossFire mode
  --addch, --add-mgpu-chain
        Defines a new MGPU chain.  --adapter should contain the adapter
        chain definition, with the master adapter being the first entry and
        the slave adapters being the subsequent entries in order of priority.
  --mgpu-sls={on|off}
        Enables/disables MGPU-SLS(Multiple GPU Single Large Surface)support 
        on the currently defined MGPU chains.  --adapter should list the
        master adapters to be enabled or disabled.
  --delch, --delete-mgpu-chain
        Delete and existing defined MGPU chain.  --adapter should list the
        master adapters of the chains to be deleted.  --adapter=all will delete
        all chain definitions.

AMD Overdrive (TM) options:
  The following options are used to get and set current and peak, core
  and memory clock information as well as read the current temperature of
  adapters.  By using the "--adapter=" argument the AMD Overdrive (TM)
  options can be targeted to a particular adapter in a multi-adapter scenario.
  If no adapter is explicitly targeted the commands will be run on the Default
  adapter as indicated by the "--list-adapters" command
  --od-enable
        Unlocks the ability to change core or memory clock values by
        acknowledging that you have read and understood the AMD Overdrive (TM)
        disclaimer and accept responsibility for and recognize the potential
        dangers posed to your hardware by changing the default core or memory
        clocks
  --od-disable
        Disables AMD Overdrive(TM) set related aticonfig options.  Previously
        commited core and memory clock values will remain, but will not be set
        on X Server restart.
  --odgc, --od-getclocks
        Lists various information regarding current core and memory clock
        settings.
        Including: current and peak clocks
                   the theoretical range clocks can be set to
                   the current load on the GPU
  --odsc, --od-setclocks={NewCoreClock|0,NewMemoryClock|0}
        Sets the core and memory clock to the values specified in MHz
        The new clock values must be within the theoretical ranges provided
        by --od-getclocks.  If a 0 is passed as either the NewCoreClock or
        NewMemoryClock it will retain the previous value and not be changed.
        There is no guarantee that the attempted clock values will succeed
        even if they lay inside the theoretical range.  These newly set
        clock values will revert to the default values if they are not
        committed using the "--od-commitclocks" command before X is
        restarted
  --odrd, --od-restoredefaultclocks
        Sets the core and memory clock to the default values.
        Warning X needs to be restarted before these clock changes will take
        effect
  --odcc, --od-commitclocks
        Once the stability of a new set of custom clocks has been proven this
        command will ensure that the Adapter will attempt to run at these new
        values whenever X is restarted
  --odgt, --od-gettemperature
        Returns the temperature reported by any thermal sensors available on
        the adapter.

ACPI Options:
  --acpi-services=on|off
        Enable/disable ACPI services. In the case of BIOS or kernel ACPI issues,
        ACPI services in the driver can be disabled through this option.
        The ACPI services are enabled by default.
  --acpi-display-switch=on|off
        Enable/disable display switching with ACPI methods on mobile platforms.
        This option is enabled by default.

Genlock/Framelock options:
  The following options are used to control operation with GLSYNC module
  in the system.  By using the "--adapter=" argument --glsync-getconfig,
  --glsync-setconfig, --glsync-getgenlock, --glsync-setgenlock options
  can be targeted to a particular adapter in a multi-adapter scenario.
  If no adapter is explicitly targeted the commands will be run on the Default
  adapter as indicated by the "--list-adapters" command
  --glsync-getport={RJ45_1 | RJ45_2 | BNC}
        Get configuration state for specified GLSync port.
        Including: Number of LEDs
                   Scanned frequency
                   Signal Source for RJ45 port if it is configured as output 
                   Port state (Input or Output) for RJ45 port
                   Signal type for BNC port
  --glsync-setport=port_type,cntl,sig_src
        Set configuration for specified GLSync port
        Parameters: port_type - RJ45_1 or RJ45_2
                                only RJ45 ports can be configured
                    cntl - 0 if port is configured as input or
                           1 if port is configured as output
                    sig_src - signal source for GL Sync port
                              if 0-3 - GPU port index
                              if RJ45_1, RJ45_2 or BNC - another GL Sync port
                              if -1  - signal source is undefined
  --glsync-getconfig
        Get timing configuration for particular GL Sync connector
        Including: Sync Delay in ms
                   Signal Source
                   Sample Rate
                   Sync field
                   Trigger Edge
                   Scan Rate multiplier
                   GPU port index this adapter connected to
  --glsync-setconfig=delay,fr_cntl,sig_src,smpl_rate,fld,edge,coef
        Set timing configuration for GL Sync connector
        Parameters: delay - Sync Delay in ms
                    fr_cntl - Enable/Disable framlock control 
                              0 Disable Framelock
                              1 Enable Framelock
                    sig_src - Signal Source for this adapter.
                              if 0-3 - GPU port index.
                                   It can not be GPU port index of this adapter
                              if RJ45_1, RJ45_2 or BNC - GL Sync port
                              if -1  - signal source is undefined
                    smpl_rate - Sample Rate for sampled sync signal.
                              0 for no sampling
                    fld - Sync field for interlaced sync signal. 
                              0 if sync field is undefined
                              1 if synced to both field
                              2 if synced to field 1
                    edge - it is defined which signal edge
                                 should trigger synchronization
                              0 if edge is undefined
                              1 if it is triggered by raising edge
                              2 if it is triggered by falling edge
                              3 if it is triggered by both edges
                    coef - Scan Rate multiplier applied to sync signal
                              0 if coef is undefined
                              1 if coef is 5
                              2 if coef is 4
                              3 if coef is 3
                              4 if coef is 2.5
                              5 if coef is 2
                              6 if coef is 1.33
                              7 if coef is 1.25
                              8 if coef is 1.
                              9 if coef is 0.8
                             10 if coef is 0.67
                             11 if coef is 0,5
                             12 if coef is 0.4
                             13 if coef is 0.33
                             14 if coef is 0.25
                             15 if coef is 0.2
        Note: Some parameters may not be valid for manual configuration.
              Please use --glsync-getconfig command to verify.
  --glsync-getgenlock=disp_type
        Get genlock mode for particular display
        disp_type  - Display Type. When RandR 1.2 and above is enabled
                     can be query by using xrandr -q command.
                     If RandR 1.2 is not enabled
                     aticonfig --query-monitor command should be used
                     to query this parameter
  --glsync-setgenlock=disp_type,mode,timing_server
        Set genlock mode for particular display
        Parameters: disp_type  - Display Type.
                                 When RandR 1.2 and above is enabled
                                 can be query by using xrandr -q command.
                                 If RandR 1.2 is not enabled
                                 aticonfig --query-monitor command
                                 should be used to query this parameter.
                    mode       - Enable/Disable Genlock
                                 0 Disable Genlock
                                 1 Enable Genlock
                    timing_server - Enable/Disable timing server
                                 0 to configure display as free run
                                 1 to configure display as a timing server
  --glsync-restart
        Reinitialized all genlock settings after power down system

X Server Options:
  --xinerama={on|off}
        Enable/disable Xinerama (MultiView) in the X Server configuration file.
        MultiView allows for the merging of independent desktop heads into a
        unified workspace allowing windows to freely cross X Screen boundaries.

Uninstall options:
     --uninstall{=force|dryrun}
         dryrun tests uninstall but does not uninstall.
         force removes all installed files without verification. 
         Uninstall without an option tries to perform the default uninstall procedure.

Miscellaneous Options:
  -v, --verbose
        Show what aticonfig is doing.
  -q, --quiet
        Disable all information output except for errors.
  --effective={now,startup}
        Choose when the requested changes should take effect.
            now:     Immediately.  This change will affect the running X
                     session if applicable.  Only 'set-powerstate' and
                     'overlay-on' are applicable for now.
            startup: On future X server startups.  This change will modify the
                     X server configuration file if applicable.
        The default is 'now,startup', i.e., do both as applicable.
  --nobackup
        Do not make an automatic backup of the configuration file.
  -i, --input=FILE
        Select a FILE to input as the configuration file. Set FILE to '-' to
        pipe from standard input.  Without this option, aticonfig will search
        /etc/X11 for the default configuration file.
  -o, --output=FILE
        Select a FILE to output the new configuration file to.  Set FILE to '-'
        to print to standard output.  Without this option, aticonfig will
        replace the input file with the newly generated file.
  -h, --help
        Display this help screen.
  -f, --force
        Only valid with 'initial' option.  Force aticonfig to generate default
        Monitor, Device, and Screen sections even if the original configuration
        file has invalid settings in these sections.

Composite options:
  --xv-pixmap-buffer-type=gartcacheable
       Allocate pixmap buffer from GART cacheable heap.
  --xv-pixmap-buffer-type=lfb
       Allocate pixmap buffer from local framebuffer.
  --xv-pixmap-buffer-type=gartuswc
       Allocate pixmap buffer from GART USWC heap.

PowerXpress options:
  --px-list-active-gpu
  --pxl
       List current activated GPU
  --px-dgpu
       Activate discrete GPU (High-Performance mode), must re-start X to take effect
  --px-igpu
       Activate integrated GPU (Power-Saving mode), must re-start X to take effect

Examples:
  1. Setting up fglrx for the first time.
       Single head :    aticonfig --initial --input=/etc/X11/xorg.conf
       Dual head   :    aticonfig --initial=dual-head --screen-layout=above
                        This command will generate a dual head configuration
                        file with the second screen located above the first
                        screen.
       Multi head  :    aticonfig --initial --heads=4 --adapter=1
                        This command will generate 4 adjacent X Screens
                        on adapter 1.  Use with -f to reduce previously configured heads.
  2. Setting up big desktop to horizontal and set overlay on secondary display.
                        aticonfig --dtop=horizontal --overlay-on=1
  3. Setting up modes for primary display.
                        aticonfig --resolution=0,1600x1200,1280x1024,1024x768
  4. Change tv geometry 
                         aticonfig --tv-geometry=85x90+10-10 
         This will set tv to 85% width (where 100% ==
         overscan) 90% height and shift 10 pixels right of centre
         and 10 pixels down of centre. 
  5. Multiple display adapters.
       List adapters :  aticonfig --list-adapters
       Init 0 and 2  :  aticonfig --adapter=0,2 --initial
       Init all      :  aticonfig --adapter=all --initial
       MultiView     :  aticonfig --xinerama=on
  6. AMD Overdrive (TM).
       List adapters          :  aticonfig --list-adapters
       Get Clocks of 0        :  aticonfig --adapter=0 --od-getclocks
       Set new Clocks for 0   :  aticonfig --adapter=0 --od-setclocks=770,1126
       Test out 3D            :  atiode -P60 -H localhost:0; echo $?
       Check Temperature of 0 :  aticonfig --adapter=0 --od-gettemperature
       Commit changes for 0   :  aticonfig --adapter=0 --od-commitclocks

     ***note***
             atiode is a stress application you start with a required
             parameter -P which specifies the test duration and the optional
             -H parameter to target a specific display to use.  For example
             atiode -P 600 -H localhost:0 would test display 0 for 10 minutes
             the return code from the application is the test result
             0: Test successfully completed.
             1: Invalid command-line parameters.
             2: Test failed because of rendering errors.
             3: Target adapter not found.
             4: Test aborted due to unknown reason

  7. Framelock/Genlock with GL Sync module
       Set GL Sync connector parameters for particular adapter: 
                     aticonfig --glsync-setconfig=0,0,2,0.0,3,8 --adapter=1
       Enable Genlock for particular display:
                     aticonfig --glsync-setgenlock=lvds,1,0 --adapter=1
       Enable Timing Master:
                     aticonfig --glsync-setgenlock=dfp3,0,1 --adapter=1
       Verify if the frequency is locked for particular display:
                     aticonfig --glsync-getgenlock=crt1 --adapter=1
       Set GL Sync output port RJ45_1:
                     aticonfig --glsync-setport=RJ45_1,1,BNC
       Reinitialize all genlock settings for all displays and adapters:
                     aticonfig --glsync-restart

Please report bugs to http://support.amd.com

Alors docteur ?

(tu m'as bien fait rire avec "le gestionnaire, on s'en balance" !!


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#10 Le 14/05/2013, à 23:41

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

C'est bon, tu peux mettre le sujet en résolu et faire un petit ajustement: gksudo amdcccle options d'affichages>cocher bureau sans déchirements>appliquer>ok puis tu relances fgl_glxgears et les FPS devraient êtres à 60 comme ton écran.

tomhar a écrit :

(tu m'as bien fait rire avec "le gestionnaire, on s'en balance" !!

Ouais, le gestionnaire, on en peux rien s'il est dur de la feuille, le pauvre. wink

#11 Le 15/05/2013, à 07:12

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Oh les jolis engrenage qui tournent harmonieuuuusement !

Bon, c'est impecc tout ça, je te remercie Faucon. Ça s'fait pas tout seul, mais visiblement on peut compter sur la communauté pour trouver de l'aide, et assurer un passage Linux tout en douceur.

A bientôt ;)

Tomhar


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#12 Le 15/05/2013, à 07:42

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Extra, de rien. Bienvenu et amuses-toi bien sans plus rien toucher à l'install du pilote. wink Tu peux naturellement changer les paramètres dans amdcccle à ta guise, résolution, AA etc... Et aussi obtenir la ° de ta CG: Check Temperature of 0 :  aticonfig --adapter=0 --od-gettemperature. Pour les autres infos>aticonfig.

#13 Le 15/05/2013, à 09:24

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Bien compris : ne plus rien toucher au pilote graphique. L'est bien utile Catalyst Control Center, d'ailleurs.

Sinon, j'vais me lancer sur l'accélération du surf maintenant, donc à p-têt dans une ot' rubrique ! héhé


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#14 Le 15/05/2013, à 10:43

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Pour l'accélération du surf maintenant, il faut mettre le cache de ton navigateur dans la ram si tu en as assez!? Tu as quel navigateur?

#15 Le 15/05/2013, à 12:57

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

Firefox 20.0

J'ai déjà désactivé plugins et extensions qui ne servent pas.
J'ai aussi testé les astuces de démarrage du navigateur en mode sans échec, mais finalement ni les modules compl. ni le mode sans échec n'y ont fait.

Il faut dire, et je vous entend déjà penser "mais oui, bien sûr !!" : je suis en zone NON dégroupée...
Mais bon...

Comment on fait pour "mettre le cache du navigateur dans la RAM" ??


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#16 Le 15/05/2013, à 13:34

bakretman

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

voila ce que je cherchais big_smile

J'ai exactement le meme probleme

Hors ligne

#17 Le 15/05/2013, à 14:17

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

#18 Le 15/05/2013, à 16:29

tomhar

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

bakretman a écrit :

voila ce que je cherchais big_smile

J'ai exactement le meme probleme

Si tu parlais du pilote graphique alors content que cela t'ait servi.

faucon50 a écrit :

En fait je croyais que tu parlais de vider le cache... ahemm


Bon c'est fait, pas évident comme manip', d'autant que je ne suis pas parvenu à finaliser le point 5 (On change le chemin de cache de Chromium-browser en le lançant avec la commande suivante : chromium-browser --disk-cache-dir="/tmp/chromium").
En invit de commande, cela répond "commande introuvable"...

Je continue néanmoins de suivre ce bon outil qu'est la page "optimisation" que tu as linkée, j'étais déjà dessus, et j'en suis au début du 5.3.

Par ailleurs, il serait préférable d'ouvrir un nouveau topic non ? cela n'a plus rien à voir avec le titre, qu's t'en penses ??

Dernière modification par tomhar (Le 15/05/2013, à 17:10)


Que serait internet sans les communautés ? un grand site marchand ?

Hors ligne

#19 Le 16/05/2013, à 04:15

F50

Re : [RESOLU] Pilote ATI Radeon 5650 - "Pilote activé mais pas utilisé"

tomhar a écrit :

Par ailleurs, il serait préférable d'ouvrir un nouveau topic non ? cela n'a plus rien à voir avec le titre, qu's t'en penses ??

Tu peux et met le lien.