Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#1 Le 14/11/2012, à 11:24

claumile

plantage Kdenlive

Bonjour,
Je soiuhaite faire un DVD avec mes clips vidéos, j'utilise Kdenlive. Lorsque on a mis les clips bout à bout, il faut faire "un rendu". Or au cours du travail il y a un plantage, et l'ordinateur s'éteint carrément. J'ai déjà utilisé Kdenlive sans problème, c'est nouveau. Que faire?
Merci de votre aide

Hors ligne

#2 Le 14/11/2012, à 12:15

Shanx

Re : plantage Kdenlive

Bonjour,
Il faudrait que juste après un plantage et un redémarrage, tu consultes /var /log/kern.log (par exemple avec cat /var /log/kern.log dans un terminal) et en colle le contenu ici (entre balises code !). Ça va être très long, donc si tu peux aide toi de l'heure indiquée pour ne sélectionner que les lignes qui concernent le plantage. wink


« En vérité, je ne voyage pas, moi, pour atteindre un endroit précis, mais pour marcher : simple plaisir de voyager. » R. L. Stevenson
--
Blog et randos

En ligne

#3 Le 14/11/2012, à 12:39

claumile

Re : plantage Kdenlive

Bonjour Shanx,
Ok, je vais le faire, mais pas tout de suite, j'essaie tout à l'heure.

Hors ligne

#4 Le 13/05/2013, à 13:39

claumile

Re : plantage Kdenlive

Bonjour,
Je fais suite à une discussion que j'ai lancée il y a quelques jours et pour laquelle je n'ai pas eu de réponse.
Je disais:
"J'ai, upgradé mon Ubuntu avec la dernière version lors de ma dernière mise à jour. Depuis j'ai un plantage systématique avec arrêt de l'ordi lorsque je fais le rendu d'une vidéo montée avec Kdenlive. cela fait trois jours que je rame sur le forum des utilisateurs de Kdenlive, aucune solution n'a été trouvée.
C'est rageant, tout le travail est fait, ça prend des plombes et ça se plante à la fin.
Y-a-t-il une solution?"


Je me rends compte que j'ai déjà eu un problème de plantage avec kdenlive, il y a qques mois. J'avais eu une une réponse me demandant de lire le fichier /var/log/kern.log

Je viens de le faire après un redémarrage faisant suite à un plantage durant le rendu d'un film vidéo avec kdenlive.
C'est Shanx qui m'avait suggéré cela. Peut-être Shanx ou un autre utilisateur de Ubuntu pourra m'aider? Voilà ce que ça donne:

May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073190] Cannot allocate resource for EISA slot 7
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073191] Cannot allocate resource for EISA slot 8
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073193] EISA: Detected 0 cards.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073203] cpufreq-nforce2: No nForce2 chipset.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073204] cpuidle: using governor ladder
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073206] cpuidle: using governor menu
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073209] ledtrig-cpu: registered to indicate activity on CPUs
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073211] EFI Variables Facility v0.08 2004-May-17
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073384] ashmem: initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073488] TCP: cubic registered
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073576] NET: Registered protocol family 10
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073735] NET: Registered protocol family 17
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073744] Key type dns_resolver registered
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073862] Using IPI No-Shortcut mode
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.073922] Loading module verification certificates
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.077252] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 91de7a0b580f416d81726d1f7134a3ecef081207'
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.077264] registered taskstats version 1
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.079513] Key type trusted registered
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.080294] isapnp: No Plug & Play device found
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.081627] Key type encrypted registered
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084140] rtc_cmos 00:03: setting system clock to 2013-05-13 11:24:42 UTC (1368444282)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084262] powernow-k8: fid 0x14 (2800 MHz), vid 0x9
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084265] powernow-k8: fid 0x12 (2600 MHz), vid 0xb
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084267] powernow-k8: fid 0x10 (2400 MHz), vid 0xd
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084269] powernow-k8: fid 0xe (2200 MHz), vid 0xf
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084270] powernow-k8: fid 0xc (2000 MHz), vid 0x11
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084271] powernow-k8: fid 0xa (1800 MHz), vid 0x11
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084273] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084295] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ (2 cpu cores) (version 2.20.00)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084306] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084308] EDD information not available.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084442] Freeing unused kernel memory: 784k freed
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084824] Write protecting the kernel text: 6252k
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084874] Write protecting the kernel read-only data: 2432k
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.084875] NX-protecting the kernel data: 3988k
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.091131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.162826] Disabling lock debugging due to kernel taint
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.163386] ahci 0000:00:11.0: version 3.0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.163466] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.163569] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.163572] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.165331] scsi0 : ahci
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.165764] scsi1 : ahci
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.169366] scsi2 : ahci
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.172318] scsi3 : ahci
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.172377] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 41
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.172381] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 41
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.172384] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 41
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.172387] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 41
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.173687] scsi4 : pata_atiixp
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.174993] scsi5 : pata_atiixp
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.175245] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.175247] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.204456] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.204461] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.204721] hub 1-1:1.0: USB hub found
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.204820] hub 1-1:1.0: 4 ports detected
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.225807] Floppy drive(s): fd0 is 1.44M
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.227741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.227929] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.228125] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xf8440000, 00:1f:d0:5b:0b:e1, XID 1c4000c0 IRQ 42
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.228128] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.243856] FDC 0 is a post-1991 82077
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.284090] firewire_ohci 0000:03:07.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.343951] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.352412] ata6.00: ATAPI: PIONEER DVD-RW  DVR-216D, 1.07, max UDMA/66
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.352432] ata6.00: NOSETXFER but PATA detected - can't skip SETXFER, might malfunction
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.354803] ata5.01: HPA detected: current 488395055, native 488397168
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.354806] ata5.01: ATA-8: WDC WD2500AAJB-00WGA0, 00.02C01, max UDMA/100
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.354809] ata5.01: 488395055 sectors, multi 16: LBA48 
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.368737] ata6.00: configured for UDMA/66
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.369036] ata5.01: configured for UDMA/100
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492054] ata1: SATA link down (SStatus 0 SControl 300)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492088] ata3: SATA link down (SStatus 0 SControl 300)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492118] ata4: SATA link down (SStatus 0 SControl 300)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492149] ata2: SATA link down (SStatus 0 SControl 300)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492328] scsi 4:0:1:0: Direct-Access     ATA      WDC WD2500AAJB-0 00.0 PQ: 0 ANSI: 5
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492461] sd 4:0:1:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492490] sd 4:0:1:0: Attached scsi generic sg0 type 0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492506] sd 4:0:1:0: [sda] Write Protect is off
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492509] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.492527] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.511629]  sda: sda1 sda2 < sda5 >
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.511969] sd 4:0:1:0: [sda] Attached SCSI disk
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.523975] scsi 5:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-216D 1.07 PQ: 0 ANSI: 5
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.555295] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.555297] cdrom: Uniform CD-ROM driver Revision: 3.20
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.555385] sr 5:0:0:0: Attached scsi CD-ROM sr0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.555437] sr 5:0:0:0: Attached scsi generic sg1 type 5
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.728104] usb 3-2: new full-speed USB device number 2 using ohci_hcd
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.779495] bio: create slab <bio-1> at 1
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.784141] firewire_core 0000:03:07.0: created device fw0: GUID 30bd0502000013ce, S400
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.840112] firewire_core 0000:03:0e.0: created device fw1: GUID 00728e1d00001fd0, S400
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.898082] usb 3-2: New USB device found, idVendor=08bb, idProduct=2900
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.898086] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.898088] usb 3-2: Product: USB Audio CODEC 
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.898090] usb 3-2: Manufacturer: Burr-Brown from TI              
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.919140] usbcore: registered new interface driver usbhid
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.919143] usbhid: USB HID core driver
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.925136] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.3/input/input3
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    2.925241] hid-generic 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:00:12.0-2/input3
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    3.158642] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    3.158647] EXT4-fs (dm-0): write access will be enabled during recovery
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777110] EXT4-fs (dm-0): orphan cleanup on readonly fs
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777121] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830454
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777216] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830453
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777223] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830424
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777231] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10224266
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777272] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10226611
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.777305] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10226231
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.793040] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 12583105
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.820253] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 13501089
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.820281] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830463
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.820377] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830462
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.820388] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830461
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.820401] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10224247
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.836600] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10224084
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.836617] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830458
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.836654] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830457
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.836666] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830451
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.836678] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10225478
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.860896] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4196497
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.898796] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4195355
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.938411] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4195203
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.938526] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4194821
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966717] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10225465
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966733] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830419
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966745] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830418
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966756] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830417
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966768] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830416
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966815] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830415
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966827] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830413
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966915] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 9830412
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966928] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10223943
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966940] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 10225533
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966952] EXT4-fs (dm-0): 31 orphan inodes deleted
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    4.966954] EXT4-fs (dm-0): recovery complete
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [    5.225284] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.410598] Adding 1830908k swap on /dev/mapper/ubuntu-swap_1.  Priority:-1 extents:1 across:1830908k 
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.543260] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.750858] lp: driver loaded but no devices found
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.762356] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.767737] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.767746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.774103] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.774224] sp5100_tco: PCI Revision ID: 0x3a
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.774243] sp5100_tco: failed to find MMIO address, giving up.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.774990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.819522] wmi: Mapper loaded
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.824507] type=1400 audit(1368444298.236:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=453 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.824896] type=1400 audit(1368444298.236:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=453 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.825106] type=1400 audit(1368444298.236:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=453 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.830634] parport_pc 00:08: reported by Plug and Play ACPI
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.830720] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.833017] [drm] Initialized drm 1.1.0 20060810
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.933689] lp0: using parport0 (interrupt-driven).
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   17.935934] hda_intel: position_fix set to 1 for device 1458:a022
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.004200] [drm] radeon defaulting to kernel modesetting.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.004205] [drm] radeon kernel modesetting enabled.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.005643] microcode: AMD CPU family 0xf not supported
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.007929] [drm] initializing kernel modesetting (RS780 0x1002:0x9610 0x1458:0xD000).
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.007957] [drm] register mmio base: 0xFDFE0000
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.007958] [drm] register mmio size: 65536
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.008628] ATOM BIOS: B27722
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.008652] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.008654] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.012975] [drm] Detected VRAM RAM=256M, BAR=256M
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.012979] [drm] RAM width 32bits DDR
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014444] [TTM] Zone  kernel: Available graphics memory: 441894 kiB
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014448] [TTM] Zone highmem: Available graphics memory: 902122 kiB
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014449] [TTM] Initializing pool allocator
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014454] [TTM] Initializing DMA pool allocator
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014478] [drm] radeon: 256M of VRAM memory ready
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014480] [drm] radeon: 512M of GTT memory ready.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014494] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014495] [drm] Driver supports precise vblank timestamp query.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014508] [drm] radeon: irq initialized.
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.014514] [drm] GART: num cpu pages 131072, num gpu pages 131072
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.020053] [drm] Loading RS780 Microcode
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029113] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029230] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029326] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029436] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029531] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029626] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.029723] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.032227] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.086296] kvm: disabled by bios
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.161588] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.196248] ppdev: user-space parallel port driver
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.214068] usbcore: registered new interface driver snd-usb-audio
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.548434] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.548494] radeon 0000:01:05.0: WB enabled
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.548498] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffddfc00
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.548501] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffddfc0c
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.548561] radeon 0000:01:05.0: setting latency timer to 64
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.579577] [drm] ring test on 0 succeeded in 1 usecs
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.579634] [drm] ring test on 3 succeeded in 1 usecs
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.579743] [drm] ib test on ring 0 succeeded in 0 usecs
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.579754] [drm] ib test on ring 3 succeeded in 0 usecs
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584060] [drm] Radeon Display Connectors
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584064] [drm] Connector 0:
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584066] [drm]   VGA-1
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584068] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584069] [drm]   Encoders:
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584071] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584072] [drm] Connector 1:
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584073] [drm]   DVI-D-1
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584074] [drm]   HPD1
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584076] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584077] [drm]   Encoders:
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584079] [drm]     DFP1: INTERNAL_KLDSCP_LVTMA
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.584136] [drm] radeon: power management initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.629059] [drm] fb mappable at 0xD0142000
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.629061] [drm] vram apper at 0xD0000000
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.629062] [drm] size 4325376
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.629063] [drm] fb depth is 24
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.629064] [drm]    pitch is 5632
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.629207] fbcon: radeondrmfb (fb0) is primary device
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.644217] Console: switching to colour frame buffer device 170x48
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.648566] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.648569] radeon 0000:01:05.0: registered panic notifier
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.648575] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0 on minor 0
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.648723] snd_hda_intel 0000:01:05.1: setting latency timer to 64
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.669606] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card2/input12
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   18.878985] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input13
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   19.334665] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.044778] Bluetooth: Core ver 2.16
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.044811] NET: Registered protocol family 31
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.044812] Bluetooth: HCI device and connection manager initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.045723] Bluetooth: HCI socket layer initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.045729] Bluetooth: L2CAP socket layer initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.045738] Bluetooth: SCO socket layer initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.057638] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.057643] Bluetooth: BNEP filters: protocol multicast
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.057652] Bluetooth: BNEP socket layer initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.068505] Bluetooth: RFCOMM TTY layer initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.068520] Bluetooth: RFCOMM socket layer initialized
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.068522] Bluetooth: RFCOMM ver 1.11
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.445905] type=1400 audit(1368444305.860:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=920 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.446183] type=1400 audit(1368444305.860:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=921 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.446375] type=1400 audit(1368444305.860:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=920 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.446515] type=1400 audit(1368444305.860:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=921 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.460869] type=1400 audit(1368444305.872:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=923 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.462229] type=1400 audit(1368444305.872:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=923 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.462450] type=1400 audit(1368444305.872:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=923 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.472059] type=1400 audit(1368444305.884:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.476652] type=1400 audit(1368444305.888:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=929 comm="apparmor_parser"
May 13 13:25:05 claude-GA-MA78GM-S2H kernel: [   25.477757] type=1400 audit(1368444305.888:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=929 comm="apparmor_parser"
May 13 13:25:07 claude-GA-MA78GM-S2H kernel: [   27.033314] r8169 0000:02:00.0 eth0: link down
May 13 13:25:07 claude-GA-MA78GM-S2H kernel: [   27.033324] r8169 0000:02:00.0 eth0: link down
May 13 13:25:07 claude-GA-MA78GM-S2H kernel: [   27.033352] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
May 13 13:25:07 claude-GA-MA78GM-S2H kernel: [   27.033606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
May 13 13:25:09 claude-GA-MA78GM-S2H kernel: [   28.597554] r8169 0000:02:00.0 eth0: link up
May 13 13:25:09 claude-GA-MA78GM-S2H kernel: [   28.597565] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
claude@claude-GA-MA78GM-S2H:~$

Dernière modification par claumile (Le 13/05/2013, à 22:11)

Hors ligne

#5 Le 13/05/2013, à 21:47

philoup44

Re : plantage Kdenlive

Salut claumile
clic sur modifier dans ton dernier message, puis
met ton "rapport" entre balise code, clic sur ce symbole < > en bleu, au dessus de ton message
ou clic sur BBcode en rouge, en bas, une page va s'ouvrir et à l'annexe CODE, tu auras un exemple !!

Ce message par exemple

Dernière modification par philoup44 (Le 13/05/2013, à 21:49)

Hors ligne

#6 Le 15/05/2013, à 22:03

claumile

Re : plantage Kdenlive

Merci à Philopp44 de m'apprendre à me servir de ce forum.
cela étant, y-a-t-il quelqu'un qui peut m'aider par rapport à mon problème de plantage de Kdenlive lors de l'exportation (rendu) en format DVD qui provoque l'arrêt de l'ordi. J'ai cela depuis mon passage à Ubuntu 12.10
Merci

Hors ligne

#7 Le 15/05/2013, à 22:53

philoup44

Re : plantage Kdenlive

Salut claumile
Avant d'upgrader, tu étais sur quelle version ??
Et sur l'ancienne version, tout se passé bien avec Kdenlive ??

Dernière modification par philoup44 (Le 15/05/2013, à 22:54)

Hors ligne

#8 Le 15/05/2013, à 23:15

claumile

Re : plantage Kdenlive

Avant ubuntu 12.10, tout se passait bien. Te dire quelle version de Kdenlive? Impossiblle j'ai désinstallé et réinstallé plusieurs fois (vieux réflexe windows)

Hors ligne

#9 Le 16/05/2013, à 01:06

philoup44

Re : plantage Kdenlive

Avant, tu étais sur 12.04 LTS ??
si oui, ....question bete,....pourquoi avoir upgradé sur 12.10 ??
Par défaut, Linux 12.04 n'aurait pas du te proposer une mise à niveau ...
Je sais, je ne répond pas directement à ta question, mais si KDENLIVE fonctionnait bien sous 12.04, et les autres applis aussi , ..........

Dernière modification par philoup44 (Le 16/05/2013, à 01:09)

Hors ligne

#10 Le 16/05/2013, à 21:30

claumile

Re : plantage Kdenlive

Je me suis sans doute mal exprimé, j'étais sous 12.10 et le gestionnaire de mises à jour m'a proposé de passer à la dernière version "Raring" je crois que c'est 13.04.

Hors ligne

#11 Le 16/05/2013, à 22:32

philoup44

Re : plantage Kdenlive

Salut claumile

La 13.04 est encore très très jeune, donc peut de retour de BUGS, etc ...
Je dirais qu'elle est à réserver aux utilisateurs avertis, tu pourrais rencontrer le meme problème ,plus tard avec la 13.10 etc ..
car à chaque fois, gros changement du système, et des potentiels déboires qui s'ensuivent avec les applis ...

Pour nous autres ,simples utilisateurs, les versions LTS (suivies à long termes) ,sont les plus adaptées
car elles bénéficies d'une mise à jours sur le long termes et seulement une mise à jours, des correctifs etc ...
pas de mise à niveau avant la prochaine LTS !!
La 12.04 LTS sera suivie jusqu'en 2017 !!!!
elle a fetée sa première année il y a peu, donc beaucoup plus de correctifs, et elle sera de plus en plus stable à l'avenir
si une appli fonctionne maintenant, il devrait en etre de meme dans 5 ans, car il n'y aura pas de changements  radicals d'une MàJ à l'autre ...
Et malgrès ses 1 an, il reste des bugs non résolus de certaines apllis ...

Personnellement, et à mon humble avis, je te conseillerais pour plus de sérénité de passer à la 12.04 LTS
et si Kdenlive fonctionne bien sous cette version, tu serasplus  tranquille pour un moment
car avec ta version actuelle, rien ne dis que si tu résous ton problème, il ne ré-apparaitra pas en octobre avec le passage à la 12.10

Je ne connais pas la 13.04, aussi je ne peux t'aider plus
Je te souhaites de résoudre rapidement ton problème smile

Dernière modification par philoup44 (Le 16/05/2013, à 22:39)

Hors ligne

Haut de page ↑