perte du partage 13.04

manchois · Le 25/05/2013, à 12:54

Bonjour,
Avec 13.04 je perds mes partages sur mes médias à chaque démarrage de la machine pourquoi?
merci.

toutafai · Le 25/05/2013, à 12:59

Bonjour,

Difficile de répondre sans avoir plus d'info...
Qu'appele tu "perdre tes partages" ?
Précise aussi :
Qu'emploi tu pour ton partage NFS, Samba, autre ?
ou sont tes partages (sur ton pc, un autre pc du réseau, un NAS, etc etc) ?
Si tes partages sont sur ton pc, sont-ils sur un disque monté automatiquement au démarrage du pc via le fstab, ou monté autrement ?

Dernière modification par toutafai (Le 25/05/2013, à 12:59)

manchois · Le 26/05/2013, à 11:12

Bonjour toutafai,
J’appelle partage c'est mes disques divers 5 sur mon pc j'ai samba d'installé mais quand demande j'ai cela comme réponse

michel@michel-System-Product-Name:~$ /etc/rc.d/init.d/smb status
bash: /etc/rc.d/init.d/smb: Aucun fichier ou dossier de ce type

michel@michel-System-Product-Name:~$ sudo apt-get install samba
[sudo] password for michel:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
samba est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libhdb9-heimdal libldb1 libndr-standard0 libndr0 libsamba-util0 libtevent0
python-ldb python-talloc python-tdb
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
michel@michel-System-Product-Name:~$ /etc/rc.d/init.d/smb status
bash: /etc/rc.d/init.d/smb: Aucun fichier ou dossier de ce type
michel@michel-System-Product-Name:~$

michel@michel-System-Product-Name:~$ service samba status
samba: unrecognized service
michel@michel-System-Product-Name:~$

J'ai tout réinstalle, toujours le même prob mes disques ne sont pas apparents sur mes autres pc. Je vois seulement le pc et l'imprimante, il me faut monter les disques et recommencer le partage pour les voire apparaître sur l'autre pc et cela à chaque démarrage.
je n'ai jamais eu ces inconvénient sur 12.04. Voila si tu comprend ma difficulté je te tire mon chapeau.
à+

toutafai · Le 26/05/2013, à 17:06

Si tes disque sont pas montés....un peu normal que les partages ne fonctionne pas.... donc il faut les monter via le fstab par exemple.

Apres samba, il faut le configurer un minimum...que donne

cat  /etc/samba/smb.conf
sudo smbtree
sudo ufw status

sous un pc windows, que donne

net config workgroup

manchois · Le 27/05/2013, à 14:20

Bonjour,
Merci pour les conseils hier je n'ai pas pu répondre (la faute au beau temps)
Voici ce que donne: cat /etc/samba/smb.conf

michel@michel-System-Product-Name:~$ cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
; comment = Home Directories
; browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom

michel@michel-System-Product-Name:~

ce que donne: sudo smbtree

michel@michel-System-Product-Name:~$ sudo smbtree
[sudo] password for michel:
Enter root's password:
WORKGROUP
\\MICHEL-SYSTEM-PR michel-System-Product-Name server (Samba, Ubuntu
\\MICHEL-SYSTEM-PR\HP-Deskjet-F4500-series HP Deskjet F4500 series
\\MICHEL-SYSTEM-PR\print$ Printer Drivers
\\MICHEL-SYSTEM-PR\IPC$ IPC Service (michel-System-Product-Name server (Samba, Ubuntu))
michel@michel-System-Product-Name:~$ sudo s

ce que donne
sudo ufw status
michel@michel-System-Product-Name:~$ sudo ufw status
[sudo] password for michel:
État : inactif
michel@michel-System-Product-Name:~$

Je me suis aperçu que j'ai essayé monter mes médias avec mount il me répond qu'il ne trouve pas les disque ou alors il sont montés avec unity.
Si j'ouvre mes disques la il se souvient qu'il y a des partages, si je vais sur un autre pc je fais ce que je veux, si j'ouvre mon pc sans aller sur tous mes disques je ne peux y accéder avec un autre pc en réseau. C'est un problème ce que je n'avais pas avant avec 12.04.
Je ne sait plus où modifier mes paquets pour continuer à avoir mes mêmes droits.
Merci à plus

toutafai · Le 27/05/2013, à 19:47

il n'y a aucun partage de définit sur la machine ubuntu dans le fichier /smb.conf.... comment as tu configuré tes partages ?....et vu qu'une commande n'as pas donné le résultats souhaité, a la place donne le retours de

sudo iptables -L #attends une dizaine de secondes que la commande se termine

Comment sont sensé etre monté tes disque ou situé tes partages ? es-ce des disque qui sont physiquement dans le pc ubuntu, ou bien s'agit-il de partage sur un autre pc ou un nas par exemple ?

il manque aussi le retours de la commande windows

net config workgroup

manchois · Le 30/05/2013, à 18:23

Bonsoir,
Excuse moi pour le retard à la reponse j'avais un chantier d'isolation en cours, j'ai fait les commandes demandées.

michel@michel-System-Product-Name:~$ sudo iptables -L
[sudo] password for michel:
Sorry, try again.
[sudo] password for michel:
Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
michel@michel-System-Product-Name:~$

et workgroup
michel@michel-System-Product-Name:~$ net config workgroup
Invalid command: net config
Usage:
net rpc Run functions using RPC transport
net rap Run functions using RAP transport
net ads Run functions using ADS transport
net file Functions on remote opened files
net share Functions on shares
net session Manage sessions
net server List servers in workgroup
net domain List domains/workgroups on network
net printq Modify printer queue
net user Manage users
net group Manage groups
net groupmap Manage group mappings
net sam Functions on the SAM database
net validate Validate username and password
net groupmember Modify group memberships
net admin Execute remote command on a remote OS/2 server
net service List/modify running services
net password Change user password on target server
net changetrustpw Change the trust password
net changesecretpw Change the secret password
net setauthuser Set the winbind auth user
net getauthuser Get the winbind auth user settings
net time Show/set time
net lookup Look up host names/IP addresses
net g_lock Manipulate the global lock table
net join Join a domain/AD
net dom Join/unjoin (remote) machines to/from a domain/AD
net cache Operate on the cache tdb file
net getlocalsid Get the SID for the local domain
net setlocalsid Set the SID for the local domain
net setdomainsid Set domain SID on member servers
net getdomainsid Get domain SID on member servers
net maxrid Display the maximum RID currently used
net idmap IDmap functions
net status Display server status
net usershare Manage user-modifiable shares
net usersidlist Display list of all users with SID
net conf Manage Samba registry based configuration
net registry Manage the Samba registry
net eventlog Process Win32 *.evt eventlog files
net printing Process tdb printer files
net serverid Manage the serverid tdb
net help Print usage information
michel@michel-System-Product-Name:~$

Le tout fonctionne si je suis allé dans mon bureau. Mes disques sont physiquement dans ma machine ils se montent automatiquement quand je clique dessus par quel mystère? je ne comprends pas le fonctionnement de 13.04, pas de possibilité de les monter par un logiciel Pysdm ou la commande mount,
Je part samedi pour deux jours si tu n'as pas le temps de voir avant on verra à mon retour.
merci d'avance.
A+

toutafai · Le 30/05/2013, à 23:54

Pas de probleme pour le delais, on as tous une vie en dehors du forum...Bon, plusieurs choses
1/je me suis trompé sur la commande windows, la bonne syntaxe est :

net config workstation

2/ Ton pare feu n'autorise pas les port nécessaire pour le partage, voit la doc
3/ Si tes partages sont sur des disques qui sont physiquement dans ton pc, ce serais mieux qu'ils soient montés automatiquement au démarrage :
Montes tes disques à la main et donne le retours de

mount -l
sudo fdisk -l
sudo blkid

4/ maintenant que tes disque contenant les partages sont a nouveau monté, redonne le retour de

cat /var/lib/samba/usershares/
sudo smbtree

manchois · Le 31/05/2013, à 09:53

Voila les réponses de tes commandes comme tu peux le voir il ne veut pas monter mes disques manuellement.
lorsque je fais net config workstation c'est toujours la même réponse il ne voit que mon pc et print je ne comprends pas le nouveau système de 13.04. Je crois qu'il on voulu simplifier mais pour ceux qui manipulent UBUNTU avec le terminal c'est plus compliqué.
Pour le par feu je n'en ai pas sous Ubuntu ni antivirus et jamais de problèmes.

michel@michel-System-Product-Name:~$ mount -l
/dev/sda3 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda6 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfsd-fuse on /run/user/michel/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=michel)

michel@michel-System-Product-Name:~$ sudo fdisk -l
[sudo] password for michel:

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x5090dbcc

Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 63 61464689 30732313+ 7 HPFS/NTFS/exFAT
/dev/sda2 104374366 312576704 104101169+ 5 Étendue
/dev/sda3 * 61466624 104361155 21447266 83 Linux
/dev/sda4 104362020 104374304 6142+ 7 HPFS/NTFS/exFAT
/dev/sda5 104374368 127781009 11703321 7 HPFS/NTFS/exFAT
/dev/sda6 127789056 142424063 7317504 83 Linux
/dev/sda7 142426112 144181970 877929+ 82 partition d'échange Linux / Solaris
/dev/sda8 144183438 312576704 84196633+ 7 HPFS/NTFS/exFAT

Les entrées de la table de partitions ne sont pas dans l'ordre du disque

Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x000bbc1d

Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb2 * 16065 312576704 156280320 5 Étendue
/dev/sdb5 16128 312576704 156280288+ 7 HPFS/NTFS/exFAT

Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x0000dd9a

Périphérique Amorce Début Fin Blocs Id Système
/dev/sdc2 16065 976768064 488376000 5 Étendue
/dev/sdc5 16128 488392064 244187968+ 7 HPFS/NTFS/exFAT
/dev/sdc6 488392128 976768064 244187968+ 7 HPFS/NTFS/exFAT
michel@michel-System-Product-Name:~$ sudo blkid
/dev/sda1: LABEL="WIN" UUID="42EC052CEC051BB3" TYPE="ntfs"
/dev/sda3: UUID="9ea4b6a7-b59e-493c-a184-e5d1d195a7f9" TYPE="ext4"
/dev/sda4: LABEL="DOSSIER 0" UUID="404681ED5B88A1B3" TYPE="ntfs"
/dev/sda5: LABEL="DOSSIER 1" UUID="B76F422B3DF403AB" TYPE="ntfs"
/dev/sda6: UUID="68575d4b-cfd7-4538-b6c8-713b3459a63c" TYPE="ext4"
/dev/sda7: UUID="ace6ceef-fab2-4089-81a5-afc9b279a4a6" TYPE="swap"
/dev/sda8: LABEL="DOSSIER 2" UUID="17FCAB3B97468BEA" TYPE="ntfs"
/dev/sdb5: LABEL="DOSSIER 3" UUID="B1CDA554D0DAB99C" TYPE="ntfs"
/dev/sdc5: LABEL="DOSSIER 4" UUID="6230C6E97D3E460D" TYPE="ntfs"
/dev/sdc6: LABEL="DOSSIER 5" UUID="7E422FD4675EC6DC" TYPE="ntfs"
michel@michel-System-Product-Name:~$ cat /var/lib/samba/usershares/
cat: /var/lib/samba/usershares/: est un dossier

michel@michel-System-Product-Name:~$ sudo smbtree
Enter root's password:
WORKGROUP
\\MICHEL-SYSTEM-PR michel-System-Product-Name server (Samba, Ubuntu
\\MICHEL-SYSTEM-PR\HP-Deskjet-F4500-series HP Deskjet F4500 series
\\MICHEL-SYSTEM-PR\print$ Printer Drivers
\\MICHEL-SYSTEM-PR\IPC$ IPC Service (michel-System-Product-Name server (Samba, Ubuntu))
michel@michel-System-Product-Name:~$

michel@michel-System-Product-Name:~$ net config workstation
Invalid command: net config
Usage:
net rpc Run functions using RPC transport
net rap Run functions using RAP transport
net ads Run functions using ADS transport
net file Functions on remote opened files
net share Functions on shares
net session Manage sessions
net server List servers in workgroup
net domain List domains/workgroups on network
net printq Modify printer queue
net user Manage users
net group Manage groups
net groupmap Manage group mappings
net sam Functions on the SAM database
net validate Validate username and password
net groupmember Modify group memberships
net admin Execute remote command on a remote OS/2 server
net service List/modify running services
net password Change user password on target server
net changetrustpw Change the trust password
net changesecretpw Change the secret password
net setauthuser Set the winbind auth user
net getauthuser Get the winbind auth user settings
net time Show/set time
net lookup Look up host names/IP addresses
net g_lock Manipulate the global lock table
net join Join a domain/AD
net dom Join/unjoin (remote) machines to/from a domain/AD
net cache Operate on the cache tdb file
net getlocalsid Get the SID for the local domain
net setlocalsid Set the SID for the local domain
net setdomainsid Set domain SID on member servers
net getdomainsid Get domain SID on member servers
net maxrid Display the maximum RID currently used
net idmap IDmap functions
net status Display server status
net usershare Manage user-modifiable shares
net usersidlist Display list of all users with SID
net conf Manage Samba registry based configuration
net registry Manage the Samba registry
net eventlog Process Win32 *.evt eventlog files
net printing Process tdb printer files
net serverid Manage the serverid tdb
net help Print usage information
michel@michel-System-Product-Name:~$
Merci et bon WE
@+

toutafai · Le 31/05/2013, à 10:33

purée quel version de windows as tu ? car chez moi "net config worksation" me donne bien le résultat souhaité...sinon quel est le workgroup sous windows ? (attention aux majuscules/minuscules)

Et non, tu as as forcement un pare feu sous ubuntu : iptables, il faut donc le configurer comme c'est indiqué dans la documentation !

1/ je t'avais dit de monter les disques ou sont tes partage AVANT de faire les commandes, ce que tu as pas fait...donc à refaire
2/ précise sur quel disque (dans le retours de fdisk -l) sont tes partages (et donc lequel on doit monter au demmarrage

Enfin,non c'est pas plus compliqué sous la 13.04 qu'avant

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 25/05/2013, à 12:54

perte du partage 13.04

#2 Le 25/05/2013, à 12:59

Re : perte du partage 13.04

#3 Le 26/05/2013, à 11:12

Re : perte du partage 13.04

#4 Le 26/05/2013, à 17:06

Re : perte du partage 13.04

#5 Le 27/05/2013, à 14:20

Re : perte du partage 13.04

#6 Le 27/05/2013, à 19:47

Re : perte du partage 13.04

#7 Le 30/05/2013, à 18:23

Re : perte du partage 13.04

#8 Le 30/05/2013, à 23:54

Re : perte du partage 13.04

#9 Le 31/05/2013, à 09:53

Re : perte du partage 13.04

#10 Le 31/05/2013, à 10:33

Re : perte du partage 13.04

Pied de page des forums