Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#1176 Le 27/04/2013, à 20:29

jibel

Re : Live Voyager 12.10

Ok merci , je vais l'installer dans Voyager , bon W.E.  cordialement    jibel


Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur.Elles peuvent être reproduites et même corrigées sans l'accord préalable du susdit.

Avec Ub.12.04, 14.04, Kub.14.04,Voy 14.04,13.04,12.04 LTS , Mint 17, hybryde fus13.04 .PC medion akira  DD 1T + 2 .

Hors ligne

#1177 Le 28/04/2013, à 05:56

jee-el

Re : Live Voyager 12.10

déconnecté ces derniers temps....diverses raisons familiales et administratives, reprise du boulot après trois mois d'arrêt...et là je tombe sur une "rédac" en pleine effervescence! eh oui, on est le 28!

il semble bien que tout soit prêt..

un super bravo, Rodolphe, à ceux qui t'ont suivi de plus près dans cette aventure, d'avance un grand merci!

moi, je vais tranquillement préparer mon ordi pour ce changement et ne rien brusquer... un gros déménagement est devant nous, le 15... alors "y a du taf à la casa!"

mais résisterais-je jusque là?

lol

bonne journée de lancement à chacun et toi, Rodolphe, essaye de souffler un peu...


jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot voyager 13.04 64bits Ubuntu 14.04/ XP sp3

Hors ligne

#1178 Le 28/04/2013, à 08:01

rodofr

Re : Live Voyager 12.10

Pour la sortie de la 13.04 Voyager j'ai ouvert une nouvelle discussion ici

Dernière modification par rodofr (Le 28/04/2013, à 08:01)


Live DVD/USB Voyager Une autre façon de voir Ubuntu

Hors ligne

#1179 Le 28/04/2013, à 16:32

sam7

Re : Live Voyager 12.10

merci wink & BRAVO

Hors ligne

#1180 Le 07/05/2013, à 22:24

enebre

Re : Live Voyager 12.10

Bonsoir,
Comment empêcher le système de ce mettre en veille car se réveiller, il ne veut pas.
Je suis, alors obligé de l’éteindre brutalement.


Voyager 14.04 en 32  bits see but unseen & seen but not see - site

Hors ligne

#1181 Le 08/05/2013, à 11:14

kurapika29

Re : Live Voyager 12.10

@enebre
Mise en veille ou extinction du moniteur (pour un laptop)
Pour la mise en veille c'est dans gestionnaires de paramètres puis screensaver et suffit de désactiver
Par contre si c'est l'extinction, c'est dans gestion d'alimentation puis régler comme tu veux les sur secteur et sur batterie wink


Disponible sur IRC, sur le serveur irc.freenode.net salon ##ubuntu-voyager (et aussi sur plein d'autre serveur/salon)
Venez si vous avec besoin d'aide ou pour causer ;) suffit d'avoir Xchat ou un autre client IRC
Où sinon en cliquant sur se lien http://kiwiirc.com/client/irc.freenode. … tu-voyager

Hors ligne

#1182 Le 08/05/2013, à 11:30

enebre

Re : Live Voyager 12.10

kurapika29, bonjour et merci d'intervenir, mais j'ai déjà exploré ces voies et rien n'y fait.
dès que dépasse les dix minutes sans usage, mon pc se bloque et je dois l'éteindre pour récupérer ma session.
Avant le gestionnaire fonctionnait pour ma 12.10 !!!


Voyager 14.04 en 32  bits see but unseen & seen but not see - site

Hors ligne

#1183 Le 08/05/2013, à 13:06

kurapika29

Re : Live Voyager 12.10

Au cas où, fait attention tu as deux onglets dans sur secteur ainsi que dans sur batterie juste au cas où quoi tongue


Disponible sur IRC, sur le serveur irc.freenode.net salon ##ubuntu-voyager (et aussi sur plein d'autre serveur/salon)
Venez si vous avec besoin d'aide ou pour causer ;) suffit d'avoir Xchat ou un autre client IRC
Où sinon en cliquant sur se lien http://kiwiirc.com/client/irc.freenode. … tu-voyager

Hors ligne

#1184 Le 08/05/2013, à 14:01

enebre

Re : Live Voyager 12.10

Il me semble que les paramètres ne s'enregistrent pas, car je viens d'y refaire un tour et tout était activé et sur 14 minutes !!! , je n'ai jamais fait ce réglage, j'avais simplement tout désactivé.
Comme quoi il est bon d'avoir l'avis d'autrui, pour éventuellement revenir sur ce qu'on imagine "fait".
J'essaye à nouveau avec re-réglage pour voir


Voyager 14.04 en 32  bits see but unseen & seen but not see - site

Hors ligne

#1185 Le 22/05/2013, à 21:12

rx22

Re : Live Voyager 12.10

Bonjour,

quelqu'un pourrait il me dire pourquoi on ne trouve pas de lien valide pour les "voyagers" 32 bits?
je n'arrive qu'a telecharger les 64bits...

merci d'avance pour vos reponses
A+

Hors ligne

#1186 Le 22/05/2013, à 21:21

jibel

Re : Live Voyager 12.10

rx22 a écrit :

Bonjour,

quelqu'un pourrait il me dire pourquoi on ne trouve pas de lien valide pour les "voyagers" 32 bits?
je n'arrive qu'a telecharger les 64bits...

merci d'avance pour vos reponses
A+

Sur le site de Rodofr ,tu as les liens pour tout les telechargements
http://voyager.legtux.org/


Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur.Elles peuvent être reproduites et même corrigées sans l'accord préalable du susdit.

Avec Ub.12.04, 14.04, Kub.14.04,Voy 14.04,13.04,12.04 LTS , Mint 17, hybryde fus13.04 .PC medion akira  DD 1T + 2 .

Hors ligne

#1187 Le 24/05/2013, à 22:49

rx22

Re : Live Voyager 12.10

Bah non desole...
pour les versions 12.04 & 12.10 les liens ne fonctionnent pas...
est ce que quelqu'un pourrait me dire ou je peux trouver les versions 32 bits, s'il vous plait?

sinon, j'en profite pour poser une autre question, comment "regle t on" le Proxy au niveau systeme
d'exploitation et non pas dans le ou les navigateur(s), s'il vous plait?

Bonne soiree a tous
Rx

Dernière modification par rx22 (Le 24/05/2013, à 22:51)

Hors ligne

#1188 Le 24/05/2013, à 23:06

klong

Re : Live Voyager 12.10


Desktop : CM Gigabyte GA-Z68P-DS Processeur Intel Core i5-2400 
>Manjaro 8.10 / Voyager 13.10 / Voyager7 / Voyager 14.04
Netbook : Compaq CQ10-130 1 G Atom N270 >Voyager 13.10 /CrunchBang

Hors ligne

#1189 Le 29/05/2013, à 09:20

Morithil

Re : Live Voyager 12.10

Petite question qui peut paraître étrange: Est ce que je risque de faire planter mon install si je fait une mise à jour vers 13.04 ?(je sais que ce ne seras pas voyager 13.04). Les paramètres de la voyager 12.10 vont-ils rester?
J'ai pas envie de devoir tout reconfigurer après une réinstall complète en fait. (Mes torrents sur transmission, ma config sur XBMC etc...)


Voyager 12.10 sur PC de secours (Asus P5LP-LE, Pentium D 2.8 Ghz*2, 4 Go Ram, Chipset intégré GMA950)

Hors ligne

#1190 Le 29/05/2013, à 10:12

ljere

Re : Live Voyager 12.10

oui c'est ce que j'ai fait depuis la beta j'ai pu ainsi gardé tous mes réglages


athlon 2800+, nvidia FX5200 et 2 Go de ram et sempron 3000+, ati radeon et 1 Go de ram sur voyager 12.04 32 bit
Toshiba satellite_c670d-11l sur openboxubuntu 14.10 64 bit
Mon Blog
administrateur du forum ubuntu-fr.org

Hors ligne

#1191 Le 13/06/2013, à 11:34

enebre

Re : Live Voyager 12.10

bonjour les amis,
Je suis confronté à un petit soucis avec le lecteur de carte intégré à mon petit portable.
Je n'arrive pas à monter une carte sd.
le retour de la fin de l'examen dmesg me donne

$ ▶ dmesg
;
;
etc
pid=2412 comm="apparmor_parser"
[11255.224163] mmc0: error -110 whilst initialising SD card

ou la totalité du roman dmesg

 ▶ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-32-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #53-Ubuntu SMP Wed May 29 20:22:58 UTC 2013 (Ubuntu 3.5.0-32.53-generic 3.5.7.11)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f43efff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f43f000-0x000000003f4befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f4bf000-0x000000003f5befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f5fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5ff000-0x000000003f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f600000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Packard Bell dot s/SJE06_PT, BIOS V1.04 04/26/2011
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36312000-0x37180fff]
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 3f5fe120 00074 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 3f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 3f5f1000 08518 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FACS 3f583000 00040
[    0.000000] ACPI: HPET 3f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 3f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 3f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 3f5f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: BOOT 3f5ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 3f5ee000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 3f5ed000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 3f5ec000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: WDAT 3f5eb000 00194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 122MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f43efff]
[    0.000000]   node   0: [mem 0x3f5ff000-0x3f5fffff]
[    0.000000] On node 0 totalpages: 259023
[    0.000000] free_area_init_node: node 0, pgdat c189e040, node_mem_map f740d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 245 pages used for memmap
[    0.000000]   HighMem zone: 30541 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73cf000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256994
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-32-generic root=UUID=bc3da957-51ad-435d-87a2-aab5c1e6b090 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2076544 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003f600)
[    0.000000] Memory: 999504k/1038336k available (5956k kernel code, 36588k reserved, 2918k data, 756k init, 123144k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18ab000 - 0xc1968000   ( 756 kB)
[    0.000000]       .data : 0xc15d12e4 - 0xc18aaec0   (2918 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d12e4   (5956 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.701 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.40 BogoMIPS (lpj=6650804)
[    0.004012] pid_max: default: 32768 minimum: 301
[    0.004071] Security Framework initialized
[    0.004107] AppArmor: AppArmor initialized
[    0.004111] Yama: becoming mindful.
[    0.004225] Mount-cache hash table entries: 512
[    0.004650] Initializing cgroup subsys cpuacct
[    0.004658] Initializing cgroup subsys memory
[    0.004677] Initializing cgroup subsys devices
[    0.004682] Initializing cgroup subsys freezer
[    0.004687] Initializing cgroup subsys blkio
[    0.004692] Initializing cgroup subsys perf_event
[    0.004748] Disabled fast string operations
[    0.004756] CPU: Physical Processor ID: 0
[    0.004760] CPU: Processor Core ID: 0
[    0.004765] mce: CPU supports 5 MCE banks
[    0.004781] CPU0: Thermal monitoring enabled (TM2)
[    0.004788] using mwait in idle threads.
[    0.011390] ACPI: Core revision 20120320
[    0.028025] ftrace: allocating 24568 entries in 48 pages
[    0.048113] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.052306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092012] CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
[    0.096005] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.096005] ... version:                3
[    0.096005] ... bit width:              40
[    0.096005] ... generic registers:      2
[    0.096005] ... value mask:             000000ffffffffff
[    0.096005] ... max period:             000000007fffffff
[    0.096005] ... fixed-purpose events:   3
[    0.096005] ... event mask:             0000000700000003
[    0.096005] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.096005] CPU 1 irqstacks, hard=f5d0e000 soft=f5d18000
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.096005] Booting Node   0, Processors  #1
[    0.108014] Brought up 2 CPUs
[    0.108026] Total of 2 processors activated (6650.80 BogoMIPS).
[    0.108596] devtmpfs: initialized
[    0.108596] EVM: security.selinux
[    0.108596] EVM: security.SMACK64
[    0.108596] EVM: security.capability
[    0.108596] PM: Registering ACPI NVS region [mem 0x3f4bf000-0x3f5befff] (1048576 bytes)
[    0.108596] dummy: 
[    0.108607] RTC time:  7:31:58, date: 06/13/13
[    0.108702] NET: Registered protocol family 16
[    0.112207] Trying to unpack rootfs image as initramfs...
[    0.112016] EISA bus registered
[    0.112016] ACPI: bus type pci registered
[    0.112016] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.112016] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.112016] PCI: Using MMCONFIG for extended config space
[    0.112016] PCI: Using configuration type 1 for base access
[    0.128228] bio: create slab <bio-0> at 0
[    0.128657] ACPI: Added _OSI(Module Device)
[    0.128666] ACPI: Added _OSI(Processor Device)
[    0.128673] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.128680] ACPI: Added _OSI(Processor Aggregator Device)
[    0.130681] ACPI: EC: Look up EC in DSDT
[    0.729239] Freeing initrd memory: 14780k freed
[    0.751904] ACPI: Executed 1 blocks of module-level executable AML code
[    0.755446] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.757111] ACPI: SSDT 3f497810 00789 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.758527] ACPI: Dynamic OEM Table Load:
[    0.758535] ACPI: SSDT   (null) 00789 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.758801] ACPI: SSDT 3f496c10 001C3 (v02  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.759753] ACPI: Dynamic OEM Table Load:
[    0.759760] ACPI: SSDT   (null) 001C3 (v02  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.760555] ACPI: SSDT 3f496e10 001B5 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.761595] ACPI: Dynamic OEM Table Load:
[    0.761602] ACPI: SSDT   (null) 001B5 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.761628] ACPI: SSDT 3f495f10 000C9 (v02  PmRef    ApCst 00003000 INTL 20100121)
[    0.761628] ACPI: Dynamic OEM Table Load:
[    0.761628] ACPI: SSDT   (null) 000C9 (v02  PmRef    ApCst 00003000 INTL 20100121)
[    0.761628] ACPI: Interpreter enabled
[    0.761628] ACPI: (supports S0 S3 S4 S5)
[    0.761628] ACPI: Using IOAPIC for interrupt routing
[    0.775033] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.775414] ACPI: No dock devices found.
[    0.775427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.776448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.777945] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.777953] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.777960] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.777969] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[    0.778052] PCI host bridge to bus 0000:00
[    0.778060] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.778067] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.778073] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.778080] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.778102] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.778170] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.778187] pci 0000:00:02.0: reg 10: [mem 0x56180000-0x561fffff]
[    0.778198] pci 0000:00:02.0: reg 14: [io  0x40a0-0x40a7]
[    0.778209] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
[    0.778220] pci 0000:00:02.0: reg 1c: [mem 0x56000000-0x560fffff]
[    0.778275] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.778290] pci 0000:00:02.1: reg 10: [mem 0x56100000-0x5617ffff]
[    0.778419] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.778449] pci 0000:00:1b.0: reg 10: [mem 0x56200000-0x56203fff 64bit]
[    0.778561] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.778603] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.778723] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.778768] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.778886] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.778931] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.779049] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.779100] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.779187] pci 0000:00:1d.0: reg 20: [io  0x4060-0x407f]
[    0.779257] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.779342] pci 0000:00:1d.1: reg 20: [io  0x4040-0x405f]
[    0.779414] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.779502] pci 0000:00:1d.3: reg 20: [io  0x4020-0x403f]
[    0.779583] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.780057] pci 0000:00:1d.7: reg 10: [mem 0x56205000-0x562053ff]
[    0.784108] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.784149] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.784259] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.784442] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.784470] pci 0000:00:1f.2: reg 10: [io  0x4098-0x409f]
[    0.784486] pci 0000:00:1f.2: reg 14: [io  0x40ac-0x40af]
[    0.784503] pci 0000:00:1f.2: reg 18: [io  0x4090-0x4097]
[    0.784519] pci 0000:00:1f.2: reg 1c: [io  0x40a8-0x40ab]
[    0.784535] pci 0000:00:1f.2: reg 20: [io  0x4080-0x408f]
[    0.784552] pci 0000:00:1f.2: reg 24: [mem 0x56204000-0x562043ff]
[    0.784615] pci 0000:00:1f.2: PME# supported from D3hot
[    0.784653] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.784731] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.784926] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[    0.784996] pci 0000:01:00.0: reg 10: [io  0x3000-0x30ff]
[    0.785110] pci 0000:01:00.0: reg 18: [mem 0x50004000-0x50004fff 64bit pref]
[    0.785185] pci 0000:01:00.0: reg 20: [mem 0x50000000-0x50003fff 64bit pref]
[    0.785493] pci 0000:01:00.0: supports D1 D2
[    0.785499] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.785697] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.785706] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.785715] pci 0000:00:1c.0:   bridge window [mem 0x55000000-0x55ffffff]
[    0.785729] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.785839] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.785884] pci 0000:02:00.0: reg 10: [mem 0x54000000-0x5400ffff 64bit]
[    0.786063] pci 0000:02:00.0: supports D1
[    0.786069] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.792086] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.792096] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.792106] pci 0000:00:1c.1:   bridge window [mem 0x54000000-0x54ffffff]
[    0.792118] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.792271] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[    0.792343] pci 0000:03:00.0: reg 10: [mem 0x53000000-0x53000fff]
[    0.792847] pci 0000:03:00.0: supports D1 D2
[    0.792853] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.793030] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.793039] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.793048] pci 0000:00:1c.2:   bridge window [mem 0x53000000-0x53ffffff]
[    0.793062] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.793162] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.793181] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.793187] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.793194] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.793200] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.793232] pci_bus 0000:00: on NUMA node 0
[    0.793243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.793531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.793714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.793841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.793968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.794309]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.794771]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.801826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.801980] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.802128] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.802278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.802426] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.802575] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.802724] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.802874] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.803094] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.803094] vgaarb: loaded
[    0.803094] vgaarb: bridge control possible 0000:00:02.0
[    0.803094] SCSI subsystem initialized
[    0.803094] libata version 3.00 loaded.
[    0.803094] ACPI: bus type usb registered
[    0.803094] usbcore: registered new interface driver usbfs
[    0.803094] usbcore: registered new interface driver hub
[    0.804083] usbcore: registered new device driver usb
[    0.804199] PCI: Using ACPI for IRQ routing
[    0.809370] PCI: pci_cache_line_size set to 64 bytes
[    0.809496] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.809502] e820: reserve RAM buffer [mem 0x3f43f000-0x3fffffff]
[    0.809507] e820: reserve RAM buffer [mem 0x3f600000-0x3fffffff]
[    0.809748] NetLabel: Initializing
[    0.809753] NetLabel:  domain hash size = 128
[    0.809757] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.809781] NetLabel:  unlabeled traffic allowed by default
[    0.812205] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.812217] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.812228] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.816087] Switching to clocksource hpet
[    0.832843] AppArmor: AppArmor Filesystem Enabled
[    0.832902] pnp: PnP ACPI init
[    0.832939] ACPI: bus type pnp registered
[    0.833869] pnp 00:00: [bus 00-ff]
[    0.833878] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.833885] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.833891] pnp 00:00: [io  0x0d00-0xffff window]
[    0.833898] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.833904] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.833910] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.833917] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.833923] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.833929] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.833935] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.833942] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.833948] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.833954] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.833960] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.833966] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.833973] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.833979] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.833985] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.834112] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.834425] pnp 00:01: [io  0x004e-0x004f]
[    0.834433] pnp 00:01: [io  0x0061]
[    0.834439] pnp 00:01: [io  0x0070]
[    0.834444] pnp 00:01: [io  0x0080]
[    0.834450] pnp 00:01: [io  0x0092]
[    0.834456] pnp 00:01: [io  0x00b2-0x00b3]
[    0.834461] pnp 00:01: [io  0x0063]
[    0.834467] pnp 00:01: [io  0x0065]
[    0.834473] pnp 00:01: [io  0x0067]
[    0.834478] pnp 00:01: [io  0x0600-0x060f]
[    0.834484] pnp 00:01: [io  0x0610]
[    0.834490] pnp 00:01: [io  0x0800-0x080f]
[    0.834496] pnp 00:01: [io  0x0810-0x0817]
[    0.834502] pnp 00:01: [io  0x0400-0x047f]
[    0.834507] pnp 00:01: [io  0x0500-0x053f]
[    0.834514] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.834520] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.834526] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.834532] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.834538] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.834544] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.834550] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.834685] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.834693] system 00:01: [io  0x0610] has been reserved
[    0.834700] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.834707] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.834714] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.834730] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.834739] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.834746] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.834753] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.834760] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.834768] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.834775] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.834782] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.834792] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.834820] pnp 00:02: [io  0x0000-0x001f]
[    0.834827] pnp 00:02: [io  0x0081-0x0091]
[    0.834833] pnp 00:02: [io  0x0093-0x009f]
[    0.834839] pnp 00:02: [io  0x00c0-0x00df]
[    0.834845] pnp 00:02: [dma 4]
[    0.834916] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.834979] pnp 00:03: [io  0x0070-0x0077]
[    0.835047] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.835204] pnp 00:04: [irq 0 disabled]
[    0.835227] pnp 00:04: [irq 8]
[    0.835234] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.835302] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.835334] pnp 00:05: [io  0x00f0]
[    0.835348] pnp 00:05: [irq 13]
[    0.835421] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.835453] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.835520] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.835587] pnp 00:07: [io  0x0060]
[    0.835594] pnp 00:07: [io  0x0064]
[    0.835606] pnp 00:07: [irq 1]
[    0.835677] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.835727] pnp 00:08: [irq 12]
[    0.835807] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[    0.836048] pnp: PnP ACPI: found 9 devices
[    0.836052] ACPI: ACPI bus type pnp unregistered
[    0.836059] PnPBIOS: Disabled by ACPI PNP
[    0.876667] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.876679] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.876691] pci 0000:00:1c.0:   bridge window [mem 0x55000000-0x55ffffff]
[    0.876701] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.876714] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.876721] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.876732] pci 0000:00:1c.1:   bridge window [mem 0x54000000-0x54ffffff]
[    0.876741] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.876753] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.876760] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.876771] pci 0000:00:1c.2:   bridge window [mem 0x53000000-0x53ffffff]
[    0.876781] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.876793] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.876886] pci 0000:00:1e.0: setting latency timer to 64
[    0.876896] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.876903] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.876909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.876916] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.876922] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.876929] pci_bus 0000:01: resource 1 [mem 0x55000000-0x55ffffff]
[    0.876936] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.876942] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.876948] pci_bus 0000:02: resource 1 [mem 0x54000000-0x54ffffff]
[    0.876955] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.876962] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.876968] pci_bus 0000:03: resource 1 [mem 0x53000000-0x53ffffff]
[    0.876975] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[    0.876981] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.876988] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.876994] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.877000] pci_bus 0000:04: resource 7 [mem 0x40000000-0xfebfffff]
[    0.877075] NET: Registered protocol family 2
[    0.877202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.877542] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.878396] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.878822] TCP: Hash tables configured (established 131072 bind 65536)
[    0.878827] TCP: reno registered
[    0.878836] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.878855] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.879035] NET: Registered protocol family 1
[    0.879075] pci 0000:00:02.0: Boot video device
[    0.892110] PCI: CLS 64 bytes, default 64
[    0.892217] Simple Boot Flag at 0x44 set to 0x1
[    0.893054] audit: initializing netlink socket (disabled)
[    0.893079] type=2000 audit(1371108718.888:1): initialized
[    0.935949] highmem bounce pool size: 64 pages
[    0.935974] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.939938] VFS: Disk quotas dquot_6.5.2
[    0.940094] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.941468] fuse init (API version 7.19)
[    0.941703] msgmni has been set to 1740
[    0.942691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.942764] io scheduler noop registered
[    0.942772] io scheduler deadline registered (default)
[    0.942791] io scheduler cfq registered
[    0.943125] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.943371] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.943605] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.943827] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.943834] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.943844] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.943884] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.943890] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.943900] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.943939] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.943945] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.943955] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.943996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.944085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.944213] intel_idle: MWAIT substates: 0x20220
[    0.944229] intel_idle: v0.4 model 0x1C
[    0.944234] intel_idle: lapic_timer_reliable_states 0x2
[    0.944239] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.944658] ACPI: AC Adapter [ACAD] (on-line)
[    0.945096] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.945107] ACPI: Power Button [PWRB]
[    0.945205] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.945213] ACPI: Sleep Button [SLPB]
[    0.945325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.945388] ACPI: Lid Switch [LID]
[    0.945508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.945516] ACPI: Power Button [PWRF]
[    0.945682] ACPI: Requesting acpi_cpufreq
[    0.958125] thermal LNXTHERM:00: registered as thermal_zone0
[    0.958133] ACPI: Thermal Zone [THRM] (30 C)
[    0.958184] ACPI: Battery Slot [BAT1] (battery absent)
[    0.958252] ACPI: Battery Slot [BAT1] (battery absent)
[    0.958274] GHES: HEST is not enabled!
[    0.958330] isapnp: Scanning for PnP cards...
[    0.958501] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.962424] Linux agpgart interface v0.103
[    0.962626] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    0.962775] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.962972] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.963222] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    0.967969] brd: module loaded
[    0.970443] loop: module loaded
[    0.972062] Fixed MDIO Bus: probed
[    0.972281] tun: Universal TUN/TAP device driver, 1.6
[    0.972286] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.972428] PPP generic driver version 2.4.2
[    0.972560] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.972667] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.972678] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.972695] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.972747] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.972768] ehci_hcd 0000:00:1d.7: debug port 1
[    0.976669] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.976718] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56205000
[    0.988042] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.988120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.988129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.988137] usb usb1: Product: EHCI Host Controller
[    0.988144] usb usb1: Manufacturer: Linux 3.5.0-32-generic ehci_hcd
[    0.988152] usb usb1: SerialNumber: 0000:00:1d.7
[    0.988510] hub 1-0:1.0: USB hub found
[    0.988525] hub 1-0:1.0: 8 ports detected
[    0.988740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.988808] uhci_hcd: USB Universal Host Controller Interface driver
[    0.988869] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.988879] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.988895] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.988945] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004060
[    0.989045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.989053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.989061] usb usb2: Product: UHCI Host Controller
[    0.989069] usb usb2: Manufacturer: Linux 3.5.0-32-generic uhci_hcd
[    0.989076] usb usb2: SerialNumber: 0000:00:1d.0
[    0.989367] hub 2-0:1.0: USB hub found
[    0.989382] hub 2-0:1.0: 2 ports detected
[    0.989575] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.989585] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.989602] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.989666] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[    0.989767] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.989776] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.989784] usb usb3: Product: UHCI Host Controller
[    0.989792] usb usb3: Manufacturer: Linux 3.5.0-32-generic uhci_hcd
[    0.989799] usb usb3: SerialNumber: 0000:00:1d.1
[    0.990079] hub 3-0:1.0: USB hub found
[    0.990094] hub 3-0:1.0: 2 ports detected
[    0.990263] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.990273] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.990289] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    0.990351] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004020
[    0.990448] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.990457] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.990465] usb usb4: Product: UHCI Host Controller
[    0.990472] usb usb4: Manufacturer: Linux 3.5.0-32-generic uhci_hcd
[    0.990479] usb usb4: SerialNumber: 0000:00:1d.3
[    0.990799] hub 4-0:1.0: USB hub found
[    0.990814] hub 4-0:1.0: 2 ports detected
[    0.991160] usbcore: registered new interface driver libusual
[    0.991285] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.997005] i8042: Detected active multiplexing controller, rev 1.1
[    0.999699] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.999718] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.999806] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.999890] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.999968] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.000336] mousedev: PS/2 mouse device common for all mice
[    1.000858] rtc_cmos 00:03: RTC can wake from S4
[    1.001079] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.001131] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.001282] device-mapper: uevent: version 1.0.3
[    1.001476] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.001538] EISA: Probing bus 0 at eisa.0
[    1.001546] EISA: Cannot allocate resource for mainboard
[    1.001554] Cannot allocate resource for EISA slot 1
[    1.001560] Cannot allocate resource for EISA slot 2
[    1.001567] Cannot allocate resource for EISA slot 3
[    1.001574] Cannot allocate resource for EISA slot 4
[    1.001581] Cannot allocate resource for EISA slot 5
[    1.001587] Cannot allocate resource for EISA slot 6
[    1.001594] Cannot allocate resource for EISA slot 7
[    1.001601] Cannot allocate resource for EISA slot 8
[    1.001606] EISA: Detected 0 cards.
[    1.001743] cpuidle: using governor ladder
[    1.001902] cpuidle: using governor menu
[    1.001908] EFI Variables Facility v0.08 2004-May-17
[    1.002490] ashmem: initialized
[    1.002839] TCP: cubic registered
[    1.003202] NET: Registered protocol family 10
[    1.003720] NET: Registered protocol family 17
[    1.003776] Key type dns_resolver registered
[    1.003931] Using IPI No-Shortcut mode
[    1.004250] PM: Hibernation image not present or could not be loaded.
[    1.004278] registered taskstats version 1
[    1.010588] Key type trusted registered
[    1.016603] Key type encrypted registered
[    1.021052] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.024229]   Magic number: 1:195:521
[    1.024378] rtc_cmos 00:03: setting system clock to 2013-06-13 07:31:59 UTC (1371108719)
[    1.025444] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.025450] EDD information not available.
[    1.312312] isapnp: No Plug & Play device found
[    1.312464] Freeing unused kernel memory: 756k freed
[    1.313018] Write protecting the kernel text: 5960k
[    1.313063] Write protecting the kernel read-only data: 2416k
[    1.313068] NX-protecting the kernel data: 4280k
[    1.356106] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[    1.374930] udevd[104]: starting version 175
[    1.595680] usb 1-3: New USB device found, idVendor=064e, idProduct=d214
[    1.595694] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=4
[    1.595703] usb 1-3: Product: WebCam
[    1.595711] usb 1-3: Manufacturer: SuYin
[    1.595719] usb 1-3: SerialNumber: HF0319-M08C-OV01-VA-R01.00.00
[    1.605088] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.605317] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[    1.605838] r8169 0000:01:00.0: eth0: RTL8105e at 0xf8414000, e8:9a:8f:71:60:04, XID 00a00000 IRQ 43
[    1.618692] rtsx_pci 0000:03:00.0: irq 44 for MSI/MSI-X
[    1.618734] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
[    1.643794] ahci 0000:00:1f.2: version 3.0
[    1.643931] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.656499] ahci: SSS flag set, parallel bus scan disabled
[    1.656570] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.656583] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.656598] ahci 0000:00:1f.2: setting latency timer to 64
[    1.670824] scsi0 : ahci
[    1.671169] scsi1 : ahci
[    1.671445] scsi2 : ahci
[    1.672966] scsi3 : ahci
[    1.673675] ata1: SATA max UDMA/133 abar m1024@0x56204000 port 0x56204100 irq 45
[    1.673688] ata2: SATA max UDMA/133 abar m1024@0x56204000 port 0x56204180 irq 45
[    1.673695] ata3: DUMMY
[    1.673700] ata4: DUMMY
[    1.900081] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    2.075067] usb 2-2: New USB device found, idVendor=093a, idProduct=2500
[    2.075081] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.075092] usb 2-2: Product: USB OPTICAL MOUSE
[    2.075101] usb 2-2: Manufacturer: PIXART
[    2.164089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.165184] ata1.00: unexpected _GTF length (4)
[    2.165512] ata1.00: ATA-8: WDC WD2500BPVT-22ZEST0, 01.01A01, max UDMA/133
[    2.165525] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.166655] ata1.00: unexpected _GTF length (4)
[    2.166940] ata1.00: configured for UDMA/133
[    2.167248] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BPVT-2 01.0 PQ: 0 ANSI: 5
[    2.167744] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.167754] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.167790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.167967] sd 0:0:0:0: [sda] Write Protect is off
[    2.167978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.168091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.244719]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.246257] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.328092] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.488088] ata2: SATA link down (SStatus 0 SControl 300)
[    2.504352] usbcore: registered new interface driver usbhid
[    2.504362] usbhid: USB HID core driver
[    2.514556] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[    2.514997] hid-generic 0003:093A:2500.0001: input,hidraw0: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
[    2.584799] usb 3-2: New USB device found, idVendor=04d9, idProduct=1603
[    2.584815] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.584826] usb 3-2: Product: USB Keyboard
[    2.584836] usb 3-2: Manufacturer:  
[    2.637694] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[    2.638026] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-2/input0
[    2.729984] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input7
[    2.730299] hid-generic 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-2/input1
[    3.376823] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   17.720474] Adding 1478652k swap on /dev/sda5.  Priority:-1 extents:1 across:1478652k 
[   17.747721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.830573] udevd[380]: starting version 175
[   17.915587] lp: driver loaded but no devices found
[   18.132596] [drm] Initialized drm 1.1.0 20060810
[   18.171702] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   18.195278] cfg80211: Calling CRDA to update world regulatory domain
[   18.212447] type=1400 audit(1371101536.687:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
[   18.213934] type=1400 audit(1371101536.687:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[   18.214768] type=1400 audit(1371101536.687:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[   18.368292] wmi: Mapper loaded
[   18.653176] i915 0000:00:02.0: setting latency timer to 64
[   18.659393] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   18.659428] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   18.659435] [drm] Driver supports precise vblank timestamp query.
[   18.670745] ath: EEPROM regdomain: 0x65
[   18.670757] ath: EEPROM indicates we should expect a direct regpair map
[   18.670766] ath: Country alpha2 being used: 00
[   18.670772] ath: Regpair used: 0x65
[   18.670781] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.670790] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670797] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.670805] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670812] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.670820] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670827] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.670835] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670842] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.670849] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670856] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.670864] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670871] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.670878] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670886] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.670893] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670899] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.670907] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670914] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.670922] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670929] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.670936] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670943] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.670951] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670958] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.670966] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.670973] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.677492] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   18.700054] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   18.763287] Bluetooth: Core ver 2.16
[   18.763369] NET: Registered protocol family 31
[   18.763377] Bluetooth: HCI device and connection manager initialized
[   18.763384] Bluetooth: HCI socket layer initialized
[   18.763390] Bluetooth: L2CAP socket layer initialized
[   18.763406] Bluetooth: SCO socket layer initialized
[   18.773553] ppdev: user-space parallel port driver
[   18.812138] Bluetooth: RFCOMM TTY layer initialized
[   18.812156] Bluetooth: RFCOMM socket layer initialized
[   18.812163] Bluetooth: RFCOMM ver 1.11
[   18.813087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.813097] Bluetooth: BNEP filters: protocol multicast
[   18.879441] type=1400 audit(1371101537.351:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=684 comm="apparmor_parser"
[   18.901912] type=1400 audit(1371101537.375:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=684 comm="apparmor_parser"
[   19.132534] [drm] initialized overlay support
[   19.193695] Linux video capture interface: v2.00
[   19.227805] uvcvideo: Found UVC 1.00 device WebCam (064e:d214)
[   19.237888] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
[   19.238389] usbcore: registered new interface driver uvcvideo
[   19.238397] USB Video Class driver (1.1.1)
[   19.323540] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[   19.342985] fbcon: inteldrmfb (fb0) is primary device
[   19.343264] Console: switching to colour frame buffer device 128x37
[   19.343338] fb0: inteldrmfb frame buffer device
[   19.343344] drm: registered panic notifier
[   19.375614] acpi device:27: registered as cooling_device2
[   19.376420] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.376637] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   19.376873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.377123] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   19.433756] hda_codec: ALC269VB: SKU not ready 0x598301f0
[   19.439860] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   19.445111] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   19.451017] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMBA 1 (20120320/utaddress-251)
[   19.451039] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.451047] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   19.451057] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20120320/utaddress-251)
[   19.451072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.451082] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   19.451096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.451103] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.796873] acer_wmi: Acer Laptop ACPI-WMI Extras
[   19.796916] acer_wmi: Function bitmap for Communication Button: 0x1
[   19.796931] acer_wmi: Brightness must be controlled by acpi video driver
[   19.798578] input: Acer WMI hotkeys as /devices/virtual/input/input12
[   19.799802] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[   19.904835] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   19.904848] cfg80211: World regulatory domain updated:
[   19.904853] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.904861] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.904868] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.904875] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.904882] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.904889] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.999980] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[   20.090977] r8169 0000:01:00.0: eth0: link down
[   20.091590] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.097645] r8169 0000:01:00.0: eth0: link down
[   20.102399] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[   20.148144] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input14
[   20.151974] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   20.178642] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   20.180636] Registered led device: ath9k-phy0
[   20.180670] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8760000, irq=17
[   21.709656] r8169 0000:01:00.0: eth0: link up
[   21.710087] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.752051] init: failsafe main process (847) killed by TERM signal
[   35.810425] init: network-manager main process (1037) terminated with status 127
[   35.810530] init: network-manager main process ended, respawning
[   35.900340] type=1400 audit(1371101554.375:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1068 comm="apparmor_parser"
[   35.901804] type=1400 audit(1371101554.375:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser"
[   35.902459] type=1400 audit(1371101554.375:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1067 comm="apparmor_parser"
[   35.902630] type=1400 audit(1371101554.375:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser"
[   35.903740] type=1400 audit(1371101554.375:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1067 comm="apparmor_parser"
[   35.923348] type=1400 audit(1371101554.395:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1071 comm="apparmor_parser"
[   35.925490] type=1400 audit(1371101554.399:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1071 comm="apparmor_parser"
[   35.935741] type=1400 audit(1371101554.407:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1069 comm="apparmor_parser"
[   35.941975] type=1400 audit(1371101554.415:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1073 comm="apparmor_parser"
[   35.950502] type=1400 audit(1371101554.423:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1069 comm="apparmor_parser"
[   37.403214] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   38.131602] init: plymouth-stop pre-start process (1372) terminated with status 1
[  339.806038] audit_printk_skb: 12 callbacks suppressed
[  339.806050] type=1400 audit(1371101857.336:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2412 comm="apparmor_parser"
[  339.807770] type=1400 audit(1371101857.336:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2412 comm="apparmor_parser"
[11255.224163] mmc0: error -110 whilst initialising SD card
[11257.068172] mmc0: error -110 whilst initialising SD card
[11258.912164] mmc0: error -110 whilst initialising SD card
[11260.752126] mmc0: error -110 whilst initialising SD card
[11262.596173] mmc0: error -110 whilst initialising SD card
[11290.776162] mmc0: error -110 whilst initialising SD card
[11292.616158] mmc0: error -110 whilst initialising SD card
[11294.456113] mmc0: error -110 whilst initialising SD card
[11356.368158] mmc0: error -110 whilst initialising SD card
[11358.208179] mmc0: error -110 whilst initialising SD card
[11360.052203] mmc0: error -110 whilst initialising SD card
[13817.400117] mmc0: error -110 whilst initialising SD card
[13819.240141] mmc0: error -110 whilst initialising SD card
[13821.080104] mmc0: error -110 whilst initialising SD card
[15073.948181] mmc0: error -110 whilst initialising SD card
[15075.792126] mmc0: error -110 whilst initialising SD card
[15077.632143] mmc0: error -110 whilst initialising SD card
sudo fdisk -l
[sudo] password for marc: 

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 têtes, 63 secteurs/piste, 30401 cylindres, total 488397168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0xdcbe4529

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1            2048    27265023    13631488   27  Hidden NTFS WinRE
/dev/sda2   *    27265024    27469823      102400    7  HPFS/NTFS/exFAT
/dev/sda3        27469824   110436351    41483264    7  HPFS/NTFS/exFAT
/dev/sda4       110438398   488396799   188979201    5  Étendue
La partition 4 ne débute pas sur une frontière de cylindre physique.
/dev/sda5       110438400   113395711     1478656   82  partition d'échange Linux / Solaris
/dev/sda6       113397760   488396799   187499520   83  Linux

Pour quelle raison Voyager ne monterait pas automatiquement les cartes sd ?

Dernière modification par enebre (Le 13/06/2013, à 11:47)


Voyager 14.04 en 32  bits see but unseen & seen but not see - site

Hors ligne

Haut de page ↑