Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 25/06/2013, à 11:34

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Coucou,

Je viens de lancer le boot repair en me laissant guider par le choix de l'ordi.
Voici qu'une erreur a été signalée. Voici le rapport de bug:
erreur boot-repair

Hors ligne

#27 Le 25/06/2013, à 12:58

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Bonjour à tous,

Je me permets de revenir vers vous pour vous tenir informés de l'avancée de mes travaux.

D'abord, une méga surprise. Alors que je fermais ma session de test sur l'ordi tactile et que je m'apprêtais à le rallumer avec Windows puisque mon install réelle n'avait pas pu aller à son terme hier soir, quelle ne fut pas ma surprise lorsqu'au moment du redémarrage, on me donnait le choix entre Kubuntu et Windows sur un écran noir!!!
J'ai donc opté pour Kubuntu et là, finie la version test, c'est le vrai Kubuntu qui se lance.
Il semblerait que le boot-repair ait fonctionné malgré le message d'erreur qui était apparu.

Cependant, la "mauvaise" nouvelle c'est que je n'arrive pas à charger ni par le gestionnaire de paquetages ni par la console le fameux "xserver-xorg-input-evtouch" qui semble être le sésame vers une utilisation fluide du tactile. On me dit qu'on ne le trouve pas.
Alors, pour le moment, j'ai un peu de tactile mais vraiment limité. Tout ce qui est présent sur le bureau (recherche et lancement) ne se laisse pas cliquer, les icônes ne sont pas "cliquables".
Je n'ai pas non plus de clavier virtuel digital au moment de taper les entrées.
Ce qui fonctionne en revanche ce sont les ouvertures, les fermetures, les redimensionnements de fenêtres, les onglets sur la page Google.
Voilà, Messieurs. Ca avance petit à petit.

Je dois vous laisser pour le moment mais ne manquerai pas de vous tenir informés de l'avancée des travaux.
Merci de votre attention, CK.

Hors ligne

#28 Le 25/06/2013, à 13:46

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Voici le Boot-Info dont tu as donné le lien dans ton post #26 :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 3June2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi 
                       /EFI/kubuntu/grubx64.efi 
                       /EFI/HP/BIOSUpdate/CryptRSA.efi 
                       /EFI/HP/BIOSUpdate/CryptRSA32.efi 
                       /EFI/HP/BIOSUpdate/HpBiosUpdate.efi 
                       /EFI/HP/BIOSUpdate/HpBiosUpdate32.efi 
                       /EFI/HP/SystemDiags/CryptRSA.efi 
                       /EFI/HP/SystemDiags/CryptRSA32.efi 
                       /EFI/HP/SystemDiags/SystemDiags.efi 
                       /EFI/HP/SystemDiags/SystemDiags32.efi 
                       /EFI/HP/boot/bootmgfw.efi /EFI/HP/boot/bootmgr.efi 
                       /EFI/HP/boot/memtest.efi 
                       /EFI/Microsoft/Boot/bkpbootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/bootx64.efi 
                       /EFI/Microsoft/Boot/memtest.efi 
                       /EFI/HP/EFI/Boot/bootx64.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe 
                       /ubuntu/winboot/wubildr /ubuntu/winboot/wubildr.mbr

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /boot/BCD

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda7: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /etc/fstab

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130218
    Boot sector info:  Syslinux looks at sector 1986880 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       According to the info in the boot sector, sdb1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb1 starts at sector 2288.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       821,247       819,200 Windows Recovery Environment (Windows)
/dev/sda2         821,248     1,353,727       532,480 EFI System partition
/dev/sda3       1,353,728     1,615,871       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       1,615,872   390,706,460   389,090,589 Data partition (Windows/Linux)
/dev/sda5   1,416,255,488 1,465,147,391    48,891,904 Data partition (Windows/Linux)
/dev/sda6     390,707,200   528,979,138   138,271,939 Data partition (Windows/Linux)
/dev/sda7   1,408,978,944 1,416,255,487     7,276,544 Swap partition (Linux)
/dev/sda8     528,979,968 1,408,978,943   879,998,976 Data partition (Windows/Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,288    31,457,279    31,454,992   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        56E69B1FE69AFE85                       ntfs       WINRE
/dev/sda2        E62F-8185                              vfat       
/dev/sda4        CE9EDF449EDF242D                       ntfs       
/dev/sda5        409C985D9C984F72                       ntfs       RECOVERY
/dev/sda6        14f640c3-9a09-4f7b-94a3-e36dc6d25468   ext4       
/dev/sda7        9e0d9ae6-9d2b-40f6-98ad-15467a4e963f   swap       
/dev/sda8        5d6d3cf7-de84-41c4-81f9-cf1c33627f1f   ext4       
/dev/sdb1        BDDC-A0D3                              vfat       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  14f640c3-9a09-4f7b-94a3-e36dc6d25468
else
  search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=10
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Kubuntu GNU/Linux' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  14f640c3-9a09-4f7b-94a3-e36dc6d25468
	else
	  search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
	fi
	linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 ro   
	initrd	/boot/initrd.img-3.8.0-19-generic
}
submenu 'Advanced options for Kubuntu GNU/Linux' $menuentry_id_option 'gnulinux-advanced-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
	menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  14f640c3-9a09-4f7b-94a3-e36dc6d25468
		else
		  search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
		fi
		echo	'Loading Linux 3.8.0-19-generic ...'
		linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 ro   
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.8.0-19-generic
	}
	menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  14f640c3-9a09-4f7b-94a3-e36dc6d25468
		else
		  search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
		fi
		echo	'Loading Linux 3.8.0-19-generic ...'
		linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.8.0-19-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "Windows UEFI bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}

menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}

menuentry "EFI/HP/BIOSUpdate/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/CryptRSA32.efi
}

menuentry "EFI/HP/BIOSUpdate/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/CryptRSA.efi
}

menuentry "EFI/HP/BIOSUpdate/HpBiosUpdate32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
}

menuentry "EFI/HP/BIOSUpdate/HpBiosUpdate.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
}

menuentry "EFI/HP/boot/bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/boot/bootmgfw.efi
}

menuentry "EFI/HP/SystemDiags/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA32.efi
}

menuentry "EFI/HP/SystemDiags/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA.efi
}

menuentry "EFI/HP/SystemDiags/SystemDiags32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags32.efi
}

menuentry "EFI/HP/SystemDiags/SystemDiags.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-CE9EDF449EDF242D' {
	insmod part_gpt
	insmod ntfs
	set root='hd0,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  CE9EDF449EDF242D
	else
	  search --no-floppy --fs-uuid --set=root CE9EDF449EDF242D
	fi
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Windows Recovery Environment (loader) (on /dev/sda5)' --class windows --class os $menuentry_id_option 'osprober-chain-409C985D9C984F72' {
	insmod part_gpt
	insmod ntfs
	set root='hd0,gpt5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  409C985D9C984F72
	else
	  search --no-floppy --fs-uuid --set=root 409C985D9C984F72
	fi
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Ubuntu 13.04 (13.04)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt8'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
	else
	  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
	fi
	linux /vmlinuz root=/dev/sda8
	initrd /initrd.img
}
submenu 'Advanced options for Ubuntu 13.04 (13.04)' $menuentry_id_option 'osprober-gnulinux-advanced-5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /vmlinuz root=/dev/sda8
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /vmlinuz root=/dev/sda8
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /vmlinuz root=/dev/sda8
		initrd /initrd.img.old
	}
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-19-generic--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /boot/vmlinuz-3.8.0-19-generic root=/dev/sda8
		initrd /boot/initrd.img-3.8.0-19-generic
	}
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /vmlinuz root=/dev/sda8
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /vmlinuz root=/dev/sda8
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		else
		  search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
		fi
		linux /vmlinuz root=/dev/sda8
		initrd /initrd.img.old
	}
}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
#UUID=E62F-8185  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda7 during installation
UUID=9e0d9ae6-9d2b-40f6-98ad-15467a4e963f none            swap    sw              0       0
UUID=E62F-8185	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 208.446212769 = 223.817416704  boot/grub/grub.cfg                             1
 208.437896729 = 223.808487424  boot/vmlinuz-3.8.0-19-generic                  1
 208.437896729 = 223.808487424  vmlinuz                                        1
 187.754993439 = 201.600389120  boot/initrd.img-3.8.0-19-generic               1
 187.754993439 = 201.600389120  initrd.img                                     1

=============================== sda8/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda8 during installation
UUID=5d6d3cf7-de84-41c4-81f9-cf1c33627f1f /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=E62F-8185  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda7 during installation
UUID=9e0d9ae6-9d2b-40f6-98ad-15467a4e963f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda8: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 408.376014709 = 438.490406912  boot/vmlinuz-3.8.0-19-generic                  1
 408.376014709 = 438.490406912  vmlinuz                                        1
 253.594837189 = 272.295383040  boot/initrd.img-3.8.0-19-generic               2
 253.594837189 = 272.295383040  initrd.img                                     2

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Start Kubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity  quiet splash --

label ubnentry2
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --

label ubnentry3
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry4
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry5
menu label Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --

label ubnentry6
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --

label ubnentry7
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --

--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             menu.c32                                       1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/27135/mounts) leaked on lvscan invocation. Parent PID 8961: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-25__12h30 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: impossible d'accéder à /home/usr/.config: Aucun fichier ou dossier de ce type
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda4:Windows 8 (loader):Windows:chain
/dev/sda5:Windows Recovery Environment (loader):Windows1:chain
/dev/sda6:Ubuntu 13.04 (13.04):Ubuntu:linux
/dev/sda8:Ubuntu 13.04 (13.04):Ubuntu1:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="WINRE" UUID="56E69B1FE69AFE85" TYPE="ntfs"
/dev/sda2: UUID="E62F-8185" TYPE="vfat"
/dev/sda4: UUID="CE9EDF449EDF242D" TYPE="ntfs"
/dev/sda5: LABEL="RECOVERY" UUID="409C985D9C984F72" TYPE="ntfs"
/dev/sda6: UUID="14f640c3-9a09-4f7b-94a3-e36dc6d25468" TYPE="ext4"
/dev/sda7: UUID="9e0d9ae6-9d2b-40f6-98ad-15467a4e963f" TYPE="swap"
/dev/sda8: UUID="5d6d3cf7-de84-41c4-81f9-cf1c33627f1f" TYPE="ext4"
/dev/sdb1: UUID="BDDC-A0D3" TYPE="vfat"


1 disks with OS, 4 OS : 2 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.


Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

=================== No kernel in /mnt/boot-sav/sda2/boot:
boot.sdi


Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi


=================== sda6/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda6/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril 24 21:37 grub.d
total 72
-rwxr-xr-x 1 root root  7541 avril  9 09:29 00_header
-rwxr-xr-x 1 root root  5974 avril  9 08:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril  9 09:29 10_linux
-rwxr-xr-x 1 root root 10258 avril  9 09:29 20_linux_xen
-rwxr-xr-x 1 root root  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril  9 09:29 30_os-prober
-rwxr-xr-x 1 root root  1426 avril  9 09:29 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril  9 09:29 40_custom
-rwxr-xr-x 1 root root   216 avril  9 09:29 41_custom
-rw-r--r-- 1 root root   483 avril  9 09:29 README


/boot/efi detected in the fstab of sda6: UUID=E62F-8185   (sda2)


=================== sda8/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda8/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril 24 21:37 grub.d
total 72
-rwxr-xr-x 1 root root  7541 avril  9 09:29 00_header
-rwxr-xr-x 1 root root  5974 avril  9 08:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril  9 09:29 10_linux
-rwxr-xr-x 1 root root 10258 avril  9 09:29 20_linux_xen
-rwxr-xr-x 1 root root  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril  9 09:29 30_os-prober
-rwxr-xr-x 1 root root  1426 avril  9 09:29 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril  9 09:29 40_custom
-rwxr-xr-x 1 root root   216 avril  9 09:29 41_custom
-rw-r--r-- 1 root root   483 avril  9 09:29 README


/boot/efi detected in the fstab of sda8: UUID=E62F-8185   (sda2)
efibootmgr -v
gui-g2slaunch.sh: ligne 127: efibootmgr : commande introuvable
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.
sda6	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda6.
sda8	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda8.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End    Size    File system     Name                          Flags
1      1049kB  420MB  419MB   ntfs            Basic data partition          hidden, diag
2      420MB   693MB  273MB   fat32           EFI system partition          boot
3      693MB   827MB  134MB                   Microsoft reserved partition  msftres
4      827MB   200GB  199GB   ntfs            Basic data partition
6      200GB   271GB  70.8GB  ext4
8      271GB   721GB  451GB   ext4
7      721GB   725GB  3726MB  linux-swap(v1)
5      725GB   750GB  25.0GB  ntfs            Basic data partition          hidden


Model: Generic Flash Disk (scsi)
Disk /dev/sdb: 16.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1171kB  16.1GB  16.1GB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:693MB:273MB:fat32:EFI system partition:boot;
3:693MB:827MB:134MB::Microsoft reserved partition:msftres;
4:827MB:200GB:199GB:ntfs:Basic data partition:;
6:200GB:271GB:70.8GB:ext4::;
8:271GB:721GB:451GB:ext4::;
7:721GB:725GB:3726MB:linux-swap(v1)::;
5:725GB:750GB:25.0GB:ntfs:Basic data partition:hidden;

BYT;
/dev/sdb:16.1GB:scsi:512:512:msdos:Generic Flash Disk;
1:1171kB:16.1GB:16.1GB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
/dev/sda8 on /mnt/boot-sav/sda8 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hidraw0 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 0c 00 00 00 00 00  |................|
00000030  55 85 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |U...............|
00000040  f6 00 00 00 01 00 00 00  85 fe 9a e6 1f 9b e6 56  |...............V|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200
ls /mnt/boot-sav/sda2: boot
EFI
GraphicsLib.Log  . Veuillez indiquer ce message à boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda2
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 fe 1b  |.X.MSDOS5.0.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 0c 00  |........?.......|
00000020  00 20 08 00 01 02 00 00  00 00 00 00 02 00 00 00  |. ..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 00 29 85 81 2f e6 4e  4f 20 4e 41 4d 45 20 20  |..)../.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 a8 18 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  10 0d 31 17 00 00 00 00  |..........1.....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  2d 24 df 9e 44 df 9e ce  |........-$..D...|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 58 6a 54  |........?....XjT|
00000020  00 00 00 00 80 00 80 00  ff 07 ea 02 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  72 4f 98 9c 5d 98 9c 40  |........rO..]..@|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.7G  1.2G  462M  73% /
udev           devtmpfs   1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs      336M  892K  335M   1% /run
/dev/sdb1      vfat        15G  956M   15G   7% /cdrom
/dev/loop0     squashfs   869M  869M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.7G  144K  1.7G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      1.7G   80K  1.7G   1% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      fuseblk    400M  265M  136M  67% /mnt/boot-sav/sda1
/dev/sda2      vfat       256M   89M  168M  35% /mnt/boot-sav/sda2
/dev/sda4      fuseblk    186G   80G  106G  43% /mnt/boot-sav/sda4
/dev/sda5      fuseblk     24G   21G  2.9G  88% /mnt/boot-sav/sda5
/dev/sda6      ext4        65G  3.3G   59G   6% /mnt/boot-sav/sda6
/dev/sda8      ext4       413G  3.4G  389G   1% /mnt/boot-sav/sda8

=================== fdisk -l:

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9cdef191

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1465149167   732574583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b6f4b

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *        2288    31457279    15727496    b  W95 FAT32


EFI détecté. Veuillez vérifier les options.

=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda6, using the following options:        sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files

=================== Settings chosen by the user
Custom-Repair
This setting will reinstall the grub-efi of sda6, using the following options:        sda2/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s    backup-and-rename-efi-files


/boot/efi added in sda6/fstab
Mount sda2 on /mnt/boot-sav/sda6/boot/efi
ls /mnt/boot-sav/sda6/boot/efi: boot
EFI
GraphicsLib.Log  . Veuillez indiquer ce message à boot.repair@gmail.com
No sda6/boot/efi/efi/ubuntu/ folder
Unhide GRUB boot menu in sda6/etc/default/grub
grub-install (GRUB) 2.00-13ubuntu3,grub-install (GRUB) 2.

chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,3001,2002,2003
Boot0000* Disque dur USB (UEFI) - Generic Flash Disk	ACPI(a0341d0,0)PCI(10,0)USB(3,0)HD(1,8f0,1dff710,219b6f4b)RC
Boot0001* Windows Boot Manager	HD(2,c8800,82000,77dd6f3d-5741-4f07-93cc-ffedda31ed06)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot2001* USB Drive (UEFI)	RC
Boot3001* Internal Hard Disk or Solid State Disk	RC

Reinstall the grub-efi of sda6
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :1
(debug) beglsefi1 kubuntu/grubx64.efi ; kubuntu , /mnt/boot-sav/sda6/boot/efi .
ls /mnt/boot-sav/sda6/boot/efi: boot
EFI
GraphicsLib.Log  . Veuillez indiquer ce message à boot.repair@gmail.com
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/kubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
df /dev/sda2
cp /mnt/boot-sav/sda6/boot/efi/EFI/kubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/kubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
ls /mnt/boot-sav/sda6/boot/efi: boot
EFI
GraphicsLib.Log  . Veuillez indiquer ce message à boot.repair@gmail.com
Add /mnt/boot-sav/sda6/boot/efi efi entries in /mnt/boot-sav/sda6/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi
sda2//mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi already added
sda2//mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi already added
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/boot/bootmgfw.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/SystemDiags32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/SystemDiags.efi
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :1

chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,3001,2002,2003
Boot0000* Disque dur USB (UEFI) - Generic Flash Disk	ACPI(a0341d0,0)PCI(10,0)USB(3,0)HD(1,8f0,1dff710,219b6f4b)RC
Boot0001* Windows Boot Manager	HD(2,c8800,82000,77dd6f3d-5741-4f07-93cc-ffedda31ed06)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot2001* USB Drive (UEFI)	RC
Boot3001* Internal Hard Disk or Solid State Disk	RC

chroot /mnt/boot-sav/sda6 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.8.0-19-generic
Found initrd image: /boot/initrd.img-3.8.0-19-generic
Found Windows 8 (loader) on /dev/sda4
Found Windows Recovery Environment (loader) on /dev/sda5
Found Ubuntu 13.04 (13.04) on /dev/sda8
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda6/boot/grub/grub.cfg

Une erreur est survenue pendant la réparation.

Vous pouvez maintenant redémarrer votre ordinateur.

Effectivement, il y a quelques passages* très déconcertants et je n'avais pas de solution à te donner. Heureusement qu'une guérison miraculeuse s'est opérée.

*en particulier, ceci :

grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :1

Dernière modification par malbo (Le 25/06/2013, à 13:46)

Hors ligne

#29 Le 25/06/2013, à 15:16

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Hello Malbo,

Que signifie cette ligne déconcertante selon toi ?
Penses-tu qu'avec une telle config' de base, mon ordi aurait dû exploser ?
ah ah ah...
Je dois admettre qu'au démarrage, après le choix Kubuntu ou Windows, je vois défiler pas mal d'infos sur écran noir au lieu d'avoir un bel écran d'accueil coloré.

Ah, mince, je viens de redémarrer pour mettre à jour les logiciels installés et là, patatra, je reste coincée sur cet écran noir jms@jms:~$ et là, j'ai beau faire des sudo apt-get update, upgrade et autres, rien ne vient, tout semble impossible (message= qq chose d'imprévisible est survenu lors de la détermination de "blablabla" (-11-erreur système).
Bon, Malbo, tu avais vu juste, il y a qq chose de déconcertant. Et là, je suis coincée.

En tout cas, en activant le pilote supplémentaire "AMD", les icônes de mon bureau sont devenues cliquables et presque tout fonctionnait en tactile, sauf l'apparition du clavier virtuel quand j'en ai besoin pour entrer mes mots-clés. Mais je progresse petit à petit.
A+.

Hors ligne

#30 Le 25/06/2013, à 16:29

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Il semblerait que ce soit la mise en action du pilote AMD qui ait fait capoter le reste. Lors du redémarrage, plus rien, impossible d'entrer sur l'interface graphique.
Pourtant, c'était vachement mieux depuis que je l'avais activé question tactile...
J'ai fait exprès de refaire la même manip' en choisissant "Ubuntu" au démarrage (sur une autre partition, au même titre que Windows, mode sans échec, etc...)
Ca m'a donné le même résultat.
Sous peu, quand mes petits nerfs se seront remis, je relancerai une vraie install depuis ma clé usb, pas juste la version de test et je verrai si ça change qq chose.

En me baladant sur le forum, j'ai compris que mon écran n'était plus reconnu et que le changement de config' l'avait perdu dans les limbes...Mais je ne sais pas comment faire depuis le mode console pour relancer une bonne config' de l'écran. Je vais arrêter là et préfère relancer une install'.

A+. CK.

Hors ligne

#31 Le 25/06/2013, à 17:21

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK a écrit :

Je vais arrêter là et préfère relancer une install'.

Il conviendrait que tu arrêtes d'empiler les installations. Je m'explique : dans le Boot-Info du post #28, tu peux voir :

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda7: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /etc/fstab

Ce qui signifie que tu as actuellement deux installations de Ubuntu 13.04 : une sur la partition sda6 et une autre sur la partition sda8. Cela commence à faire beaucoup et si tu veux réinstaller, je t'engage à réutiliser la partition sda6 pour cette nouvelle installation. A l'étape 3 de l'installation, il faudra sélectionner "Autre chose" et ensuite, il faudra modifier la ligne sda6 pour définir qu'elle soit la partition racine de l'installation nouvelle. Ainsi l'installation écrasera ce qui est actuellement dans la partition sda6 pour y installer la nouvelle partition racine.
A noter que tu n'auras pas besoin de définir quoi que ce soit d'autre, ni pour la swap, ni pour l'emplacement du chargeur d'amorçage (tu ne modifies rien : tu laisses comme c'est)

Dernière modification par malbo (Le 25/06/2013, à 17:27)

Hors ligne

#32 Le 25/06/2013, à 20:48

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Bonsoir,

Tout allait plutôt pas mal dans l'aprèm' mais là, c'est le drame....
Certaine que le dual-boot m'empêchait d'installer convenablement Kubuntu, j'étais donc décidée à le virer.
Je relance donc une nouvelle install' mais cette fois, en utilisant la totalité du disque, sans recréer de nouvelles partitions.
Mais là, encore, message d'erreur "grub/EFI " ne peut pas être installé dans /target.
J'ai pourtant désactivé le Secure boot avant de lancer l'install.
Je me retrouve donc avec un seul système en état de marche, la session de ma clé USB.
Snif, snif.
http://paste.ubuntu.com/5799515/

Hors ligne

#33 Le 25/06/2013, à 21:04

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Ton Boot-Info ( http://paste.ubuntu.com/5799515/ ) est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 3June2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sda1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda1 starts at sector 2048.
    Operating System:  
    Boot files:        /EFI/kubuntu/grubx64.efi /EFI/kubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130218
    Boot sector info:  Syslinux looks at sector 1986880 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       According to the info in the boot sector, sdb1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb1 starts at sector 2288.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       194,559       192,512 EFI System partition
/dev/sda2         194,560 1,457,870,847 1,457,676,288 Data partition (Windows/Linux)
/dev/sda3   1,457,870,848 1,465,147,391     7,276,544 Swap partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,288    31,457,279    31,454,992   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        0A2C-AEED                              vfat       
/dev/sda2        1ee08611-670d-473b-ab65-da144e3ada24   ext4       
/dev/sda3        6b8492e1-d9cb-4c60-90de-59d91f7b363a   swap       
/dev/sdb1        BDDC-A0D3                              vfat       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=1ee08611-670d-473b-ab65-da144e3ada24 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=0A2C-AEED  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=6b8492e1-d9cb-4c60-90de-59d91f7b363a none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  68.226959229 = 73.258139648   boot/vmlinuz-3.8.0-19-generic                  1
  68.226959229 = 73.258139648   vmlinuz                                        1
 520.544055939 = 558.929924096  boot/initrd.img-3.8.0-19-generic               2
 520.544055939 = 558.929924096  initrd.img                                     2

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Start Kubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity  quiet splash --

label ubnentry2
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --

label ubnentry3
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry4
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry5
menu label Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --

label ubnentry6
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --

label ubnentry7
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --

--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             menu.c32                                       1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

File descriptor 6 (/proc/6520/mounts) leaked on lvscan invocation. Parent PID 13163: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-26__03h38 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:Ubuntu 13.04 (13.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="0A2C-AEED" TYPE="vfat"
/dev/sda2: UUID="1ee08611-670d-473b-ab65-da144e3ada24" TYPE="ext4"
/dev/sda3: UUID="6b8492e1-d9cb-4c60-90de-59d91f7b363a" TYPE="swap"
/dev/sdb1: UUID="BDDC-A0D3" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.



=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril 24 21:37 grub.d
total 72
-rwxr-xr-x 1 root root  7541 avril  9 09:29 00_header
-rwxr-xr-x 1 root root  5974 avril  9 08:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril  9 09:29 10_linux
-rwxr-xr-x 1 root root 10258 avril  9 09:29 20_linux_xen
-rwxr-xr-x 1 root root  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril  9 09:29 30_os-prober
-rwxr-xr-x 1 root root  1426 avril  9 09:29 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril  9 09:29 40_custom
-rwxr-xr-x 1 root root   216 avril  9 09:29 41_custom
-rw-r--r-- 1 root root   483 avril  9 09:29 README


/boot/efi detected in the fstab of sda2: UUID=0A2C-AEED   (sda1)
efibootmgr -v
gui-g2slaunch.sh: line 127: efibootmgr: command not found
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  99.6MB  98.6MB  fat32                 boot
2      99.6MB  746GB   746GB   ext4
3      746GB   750GB   3726MB  linux-swap(v1)


Model: Generic Flash Disk (scsi)
Disk /dev/sdb: 16.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1171kB  16.1GB  16.1GB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:99.6MB:98.6MB:fat32::boot;
2:99.6MB:746GB:746GB:ext4::;
3:746GB:750GB:3726MB:linux-swap(v1)::;

BYT;
/dev/sdb:16.1GB:scsi:512:512:msdos:Generic Flash Disk;
1:1171kB:16.1GB:16.1GB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sda1: /*/*/*/*

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 01 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 f0 02 00 c9 05 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 00 29 ed ae 2c 0a 20  20 20 20 20 20 20 20 20  |..)..,.         |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.7G  391M  1.3G  24% /
udev           devtmpfs   1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs      336M  848K  335M   1% /run
/dev/sdb1      vfat        15G  956M   15G   7% /cdrom
/dev/loop0     squashfs   869M  869M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.7G   52K  1.7G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      1.7G   80K  1.7G   1% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      vfat        93M  1.5M   92M   2% /mnt/boot-sav/sda1
/dev/sda2      ext4       685G  2.9G  647G   1% /mnt/boot-sav/sda2

=================== fdisk -l:

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9cdef191

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1465149167   732574583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b6f4b

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *        2288    31457279    15727496    b  W95 FAT32


EFI détecté. Veuillez vérifier les options.

=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Manifestement, l'ordi résiste héroïquement (et toi aussi). Je te suggère d'utiliser la procédure que j'indique dans ce lien pour réaliser un CD ou un DVD de Super Grub2 Disk  : http://forum.ubuntu-fr.org/viewtopic.php?id=1287711
Cet outil est capable d'aller sniffer toutes les installation de Ubuntu.

Important : je n'ai pas réussi malgré beaucoup de bonne volonté à faire fonctionner Super Grub2 Disk en liveUSB (ça m'aurait bien intéressé) : je te prie donc de ne pas perdre ton temps à essayer de la faire et à réaliser le liveCD (ou le liveDVD) comme je te propose.

Dernière modification par malbo (Le 25/06/2013, à 21:19)

Hors ligne

#34 Le 25/06/2013, à 21:11

kikislater

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Bonjour Claire,

Moi ce que je vois c'est une erreur d'installation :
=> No boot loader is installed in the MBR of /dev/sda.

Tu as installé grub sur /dev/sdb qui est ta clé usb de 16go je présume (/dev/sda ton disque dur interne). Lors de l'installation il est demandé où installer grub.
Je vais recevoir le même netbook mais dans 10jours. Dès lors je pourrais t'aider mais pas avant.

Essaie aussi de désactiver des fonctions dans le bios : quickboot / fastboot et Intel SRT (Smart Response Technology) si jamais ça ne fonctionne toujours pas.

Hors ligne

#35 Le 25/06/2013, à 21:16

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

@kikislater : tu peux aller te recoucher car tu n'y es pas du tout :  c'est une installation en mode UEFI

Hors ligne

#36 Le 25/06/2013, à 21:17

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Bonsoir Kikislater,

Je peux attendre les 10 jours...Pas de problème.
Là, j'ai réussi à lancer Kubuntu sans ma clé USB donc direct sur le HDD mais toutes les modifications que j'apporte se soldent par "an error occured while applying changes" et à chaque fois, le détail montre "grub-efi-amd64" subprocess installed post-installation script returned error exit status 1
grub-efi
dependency problems-leaving unconfigured.

Bon et toi aussi tu penses te séparer de Windows ?
N'hésite pas à me tenir au courant. Je trépigne déjà d'impatience.
Bonne soirée, Claire.

Hors ligne

#37 Le 25/06/2013, à 21:22

kikislater

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

malbo a écrit :

@kikislater : tu peux aller te recoucher car tu n'y es pas du tout :  c'est une installation en mode UEFI

Pas besoin d'aller me coucher je suis frais comme un gardon ... Et il fut y aller mollo t'es sur un forum garçon, chacun a le droit de porter son avis. J'ai un portable UEFI aussi et hp qui plus est ... donc no comment !

Alors le /dev/sdb c'est quoi pour toi malbo ? Claire ta clé usb pour le live ubuntu fait quelle capacité ? 16go ?

Dernière modification par kikislater (Le 25/06/2013, à 21:22)

Hors ligne

#38 Le 25/06/2013, à 21:23

kikislater

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK a écrit :

Bon et toi aussi tu penses te séparer de Windows ?

Bien sur jamais de windows chez moi ! ça fait parti de mon métier également

Hors ligne

#39 Le 25/06/2013, à 21:39

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

@kikislater : c'est plus grave que je pensais alors. Dans une installation en UEFI, on n'installe pas dans le MBR du disque dur : c'est donc normal qu'on puisse voir "=> No boot loader is installed in the MBR of /dev/sda." et ce n'est pas une erreur d'installation comme tu l'as écrit.

Hors ligne

#40 Le 26/06/2013, à 08:39

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK,
J'ai regardé plus attentivement ton Boot-Info et je te propose de laisser tomber pour l'instant ma proposition du post #33 d'utiliser Super Grub2 Disk. A la place, je te propose de réaliser ce que je vais détailler ci-dessous.
Tu démarres sur ta liveUSB Ubuntu 13.04 en session live (choix "Essayer Ubuntu") puis tu passes la commande suivante (installation du paquet efibootmgr) :

sudo apt-get install efibootmgr

Tu laisses se faire l'installation puis tu peux passer la commande suivante :

sudo efibootmgr -v

Et tu pourras poster le résultat obtenu suite à cette commande ( ce résultat contient en principe les instructions de démarrage de l'UEFI avec l'ordre de démarrage et le détail de toutes les possibilités de démarrage) dans ta réponse à ce message

Ensuite, sans quitter la session (pour profiter de l'installation du paquet efibootmgr), tu peux faire ton Boot-Info comme tu fais d'habitude et poster également l'URL de ce Boot-Info. Normalement, le contenu de ce rapport devrait donner les infos supplémentaires grâce à l'installation préalable de efibootmgr.

Dernière modification par malbo (Le 26/06/2013, à 08:44)

Hors ligne

#41 Le 26/06/2013, à 10:06

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Bonjour Malbo,

Pour répondre à ta question,
1) suite à la manipulation que tu m'as demandé de faire, voici le résultat:
jms@jms-HP-Pavilion:~$ sudo apt-get install efibootmgr

[sudo] password for jms:

Lecture des listes de paquets... Fait

Construction de l'arbre des dépendances

Lecture des informations d'état... Fait

efibootmgr est déjà la plus récente version disponible.

0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

2 partiellement installés ou enlevés.

E: Impossible d'obtenir le verrou /var/cache/apt/archives/lock - open (11: Ressource temporairement non disponible)

E: Impossible de verrouiller le répertoire /var/cache/apt/archives/

jms@jms-HP-Pavilion:~$ sudo efibootmgr -v

BootCurrent: 0000

Timeout: 0 seconds

BootOrder: 3000,2001,2002,2003

Boot0000* Windows Boot Manager HD(1,800,2f000,aa6474ff-fe4e-49ee-bc36-8cc512b0ee03)File(\EFI\Microsoft\Boot\bootmgfw.efi)RC

Boot2001* USB Drive (UEFI) RC

Boot3000* Internal Hard Disk or Solid State Disk RC

jms@jms-HP-Pavilion:~$

2) Après le boot-repair demandé, voici le résultat: www.paste.ubuntu.com/5800944/
Ce qui ressort immédiatement, c'est "grub-efi-amd64" et "grub-efi" ont rencontré des erreurs...
A+, bonne matinée. Claire.

Hors ligne

#42 Le 26/06/2013, à 10:20

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Je colle ci-dessous ton dernier Boot-Info ( http://paste.ubuntu.com/5800944/ ):

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 3June2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sda1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda1 starts at sector 2048.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/kubuntu/grubx64.efi 
                       /EFI/kubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.04 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       194,559       192,512 EFI System partition
/dev/sda2         194,560 1,457,870,847 1,457,676,288 Data partition (Windows/Linux)
/dev/sda3   1,457,870,848 1,465,147,391     7,276,544 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        0A2C-AEED                              vfat       
/dev/sda2        1ee08611-670d-473b-ab65-da144e3ada24   ext4       
/dev/sda3        6b8492e1-d9cb-4c60-90de-59d91f7b363a   swap       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw)
/dev/sda2        /                        ext4       (rw,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1ee08611-670d-473b-ab65-da144e3ada24
else
  search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Kubuntu GNU/Linux' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1ee08611-670d-473b-ab65-da144e3ada24' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1ee08611-670d-473b-ab65-da144e3ada24
	else
	  search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
	fi
	linux	/boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro   
	initrd	/boot/initrd.img-3.8.0-25-generic
}
submenu 'Advanced options for Kubuntu GNU/Linux' $menuentry_id_option 'gnulinux-advanced-1ee08611-670d-473b-ab65-da144e3ada24' {
	menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-25-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-25-generic-advanced-1ee08611-670d-473b-ab65-da144e3ada24' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1ee08611-670d-473b-ab65-da144e3ada24
		else
		  search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
		fi
		echo	'Loading Linux 3.8.0-25-generic ...'
		linux	/boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro   
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.8.0-25-generic
	}
	menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-25-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-25-generic-recovery-1ee08611-670d-473b-ab65-da144e3ada24' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1ee08611-670d-473b-ab65-da144e3ada24
		else
		  search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
		fi
		echo	'Loading Linux 3.8.0-25-generic ...'
		linux	/boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.8.0-25-generic
	}
	menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-1ee08611-670d-473b-ab65-da144e3ada24' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1ee08611-670d-473b-ab65-da144e3ada24
		else
		  search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
		fi
		echo	'Loading Linux 3.8.0-19-generic ...'
		linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro   
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.8.0-19-generic
	}
	menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-1ee08611-670d-473b-ab65-da144e3ada24' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1ee08611-670d-473b-ab65-da144e3ada24
		else
		  search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
		fi
		echo	'Loading Linux 3.8.0-19-generic ...'
		linux	/boot/vmlinuz-3.8.0-19-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.8.0-19-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=1ee08611-670d-473b-ab65-da144e3ada24 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=0A2C-AEED  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=6b8492e1-d9cb-4c60-90de-59d91f7b363a none            swap    sw              0       0
UUID=0A2C-AEED	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 320.219203949 = 343.832752128  boot/grub/grub.cfg                             1
   3.168075562 = 3.401695232    boot/vmlinuz-3.8.0-19-generic                  1
   3.191513062 = 3.426861056    boot/vmlinuz-3.8.0-25-generic                  1
   3.191513062 = 3.426861056    vmlinuz                                        1
   3.191513062 = 3.426861056    vmlinuz.old                                    1
   5.138015747 = 5.516902400    boot/initrd.img-3.8.0-19-generic               1
 520.887409210 = 559.298596864  boot/initrd.img-3.8.0-25-generic               1
 520.887409210 = 559.298596864  initrd.img                                     1
 520.887409210 = 559.298596864  initrd.img.old                                 1

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/18556/mounts) leaked on lvscan invocation. Parent PID 25240: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-26__11h02 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in installed-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 13.04 CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="0A2C-AEED" TYPE="vfat"
/dev/sda2: UUID="1ee08611-670d-473b-ab65-da144e3ada24" TYPE="ext4"
/dev/sda3: UUID="6b8492e1-d9cb-4c60-90de-59d91f7b363a" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.



=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril 24 23:37 grub.d
total 72
-rwxr-xr-x 1 root root  7541 avril  9 11:29 00_header
-rwxr-xr-x 1 root root  5974 avril  9 10:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril  9 11:29 10_linux
-rwxr-xr-x 1 root root 10258 avril  9 11:29 20_linux_xen
-rwxr-xr-x 1 root root  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril  9 11:29 30_os-prober
-rwxr-xr-x 1 root root  1426 avril  9 11:29 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril  9 11:29 40_custom
-rwxr-xr-x 1 root root   216 avril  9 11:29 41_custom
-rw-r--r-- 1 root root   483 avril  9 11:29 README


/boot/efi detected in the fstab of sda2: UUID=0A2C-AEED	 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 3000,2001,2002,2003
Boot0000* Windows Boot Manager	HD(1,800,2f000,aa6474ff-fe4e-49ee-bc36-8cc512b0ee03)File(EFIMicrosoftBootbootmgfw.efi)RC
Boot2001* USB Drive (UEFI)	RC
Boot3000* Internal Hard Disk or Solid State Disk	RC
=================== UEFI/Legacy mode:
No EFI in dmseg. Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  99.6MB  98.6MB  fat32                 boot
2      99.6MB  746GB   746GB   ext4
3      746GB   750GB   3726MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:99.6MB:98.6MB:fat32::boot;
2:99.6MB:746GB:746GB:ext4::;
3:746GB:750GB:3726MB:linux-swap(v1)::;


=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda1 on /boot/efi type vfat (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 shm snapshot snd stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /boot/efi:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 01 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 f0 02 00 c9 05 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 00 29 ed ae 2c 0a 20  20 20 20 20 20 20 20 20  |..)..,.         |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda2      ext4      685G  5.0G  645G   1% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.7G  8.0K  1.7G   1% /dev
tmpfs          tmpfs     336M  836K  335M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.7G  148K  1.7G   1% /run/shm
none           tmpfs     100M   16K  100M   1% /run/user
/dev/sda1      vfat       93M  1.8M   91M   2% /boot/efi

=================== fdisk -l:

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9cdef191

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1465149167   732574583+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.04] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Dans cet extrait (mais ça se voit ailleurs), on peut constater que tu as fait ce Boot-Info depuis une session de ton Ubuntu installé sur le disque dur :

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-26__11h02 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in installed-session (Ubuntu 13.04, raring, Ubuntu, x86_64)

alors que jusqu'ici tous tes Boot-Info avaient été faits depuis une session liveCD.
Moi, ça me va parfaitement un Boot-Info réalisé depuis la session "normale" de Ubuntu. Ce que je ne comprends pas - mais j'espère que tu vas pouvoir m'expliquer précisément - c'est comment tu peux arriver à démarrer ce Ubuntu installé sur disque dur alors que tu n'as aucune entrée dans ton système UEFI comme on le voit dans cet autre extrait de ton Boot-Info où on retrouve (c'est rassurant) la même chose que dans le résultat que tu as posté pour la commande "sudo efibootmgr -v" :

efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 3000,2001,2002,2003
Boot0000* Windows Boot Manager	HD(1,800,2f000,aa6474ff-fe4e-49ee-bc36-8cc512b0ee03)File(EFIMicrosoftBootbootmgfw.efi)RC
Boot2001* USB Drive (UEFI)	RC
Boot3000* Internal Hard Disk or Solid State Disk	RC

Dernière modification par malbo (Le 26/06/2013, à 10:31)

Hors ligne

#43 Le 26/06/2013, à 12:24

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Salut à tous,

Bon, j'ai fini par réinstaller totalement Uubntu.
Si vous ne le saviez pas, avis à tous les utilisateurs de Linux sur une machine récente pré-installée avec Windows...
Dans le menu Boot Configuration (F2 ou F10 généralement au démarrage), vous devez non seulement désactiver le mode "Secure Boot" mais en plus, à la ligne inférieure, on vous demande d'entrer un genre de code à 4 chiffres pour BIEN valider votre demande. Evidemment, j'étais passée devant sans rien voir...

En ce qui me concerne, je suis persuadée que c'est ceci qui a empêché l'installation correcte de GRUB car même Windows désinstallé, on pouvait continuer à voir dans le boot un vieux souvenir de cette installation. Bref, faites bien attention à ce détail qui peut vous pourrir la vie...

Par contre, pour ce qui est du tactile, nada, rien du tout, peanuts.

Hors ligne

#44 Le 26/06/2013, à 13:24

kikislater

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK a écrit :

Salut à tous,

Bon, j'ai fini par réinstaller totalement Uubntu.
Si vous ne le saviez pas, avis à tous les utilisateurs de Linux sur une machine récente pré-installée avec Windows...
Dans le menu Boot Configuration (F2 ou F10 généralement au démarrage), vous devez non seulement désactiver le mode "Secure Boot" mais en plus, à la ligne inférieure, on vous demande d'entrer un genre de code à 4 chiffres pour BIEN valider votre demande. Evidemment, j'étais passée devant sans rien voir...

En ce qui me concerne, je suis persuadée que c'est ceci qui a empêché l'installation correcte de GRUB car même Windows désinstallé, on pouvait continuer à voir dans le boot un vieux souvenir de cette installation. Bref, faites bien attention à ce détail qui peut vous pourrir la vie...

Par contre, pour ce qui est du tactile, nada, rien du tout, peanuts.

Déjà un bon point de réglé et je n'avais pas forcément tord quand à la mauvaise install ...
Bref pour le tactile c'est parti. Ca fonctionnait donc en live cd/usb le tactile et là rien ?

Hors ligne

#45 Le 26/06/2013, à 13:39

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Bonjour Kikislater,

Oui, tu as bien compris.
Depuis mon install propre d'Ubuntu en single boot, je n'ai rien de tactile.
D'ailleurs, je suis déjà passée à Kubuntu.
Par la console, j'ai lancé une commande qui permettrait de détecter les périphériques tactiles (j'ai déjà oublié laquelle) mais l'ordi n'a rien détecté du tout.
Ma carte graphique si ça apporte de l'eau au moulin est Gallium 0.4 on AMD Aruba.
Je suis toute ouïe pour d'éventuelles solutions. A+, merci.
Claire.

Hors ligne

#46 Le 26/06/2013, à 15:17

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK a écrit :

Dans le menu Boot Configuration (F2 ou F10 généralement au démarrage), vous devez non seulement désactiver le mode "Secure Boot" mais en plus, à la ligne inférieure, on vous demande d'entrer un genre de code à 4 chiffres pour BIEN valider votre demande. Evidemment, j'étais passée devant sans rien voir...

Faut-il comprendre que jusque là, Secure Boot était toujours resté activé ? Pourrais-tu préciser ce que c'est que cette ligne inférieure ? Ce "code à 4 chiffres", c'est toi qui le choisis librement (comme un mot de passe) ou c'est un code fourni par le vendeur (ou le fabricant) de ton ordi que tu dois rentrer sinon tu n'as pas accès au paramètre ?
Comme tu as tout réinstallé (ça change à grande vitesse chez toi...), pourrais-tu poster ton Boot-Info actuel pour qu'on puisse voir à quoi ça ressemble ?

Dernière modification par malbo (Le 26/06/2013, à 15:19)

Hors ligne

#47 Le 26/06/2013, à 16:01

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Hello Malbo,

Un problème de dépendances m'empêche de relancer boot-repair pour le moment.

Néanmoins, bonne question de ta part...
Dans le menu boot, il y a cette ligne où l'on te demande d'activer ou non le secure-boot.
Juste en dessous de cette ligne , il y a une autre ligne à laquelle tu as accès grâce aux flèches, comme un genre de doublon, de confirmation et si tu choisis à nouveau de désactiver, une fenêtre de dialogue s'ouvre ( interface laide, comme le reste style BIOS) et on te demande de retaper 4 chiffres qu'on te montre dans cette fenêtre de dialogue pour confirmer ton action.

Alors, oui, j'imagine que c'est une protection encore plus "subtile" du fabricant de l'ordi ou du fournisseur d'OS officiel à savoir Microsoft. J'ai configuré très récemment 2 autres ordis neufs et récents de cette marque pré-installés en Windows (64 bits) et je n'avais pas rencontré un tel acharnement...
Franchement, ça ne saute pas aux yeux non plus, c'est vraiment bien ficelé.
On peut dire que le mec qui est déjà en situation de monopole intergalactique n'a pas vraiment confiance en son petit OS d'amour pour mettre en place de telles options de sécurité et de tels verrous. Bonjour la paranoïa!!!!!

Bref, faites très attention aux détails sur cette page de boot configuration. CK.

Hors ligne

#48 Le 26/06/2013, à 18:03

kikislater

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK a écrit :

2 partiellement installés ou enlevés.

E: Impossible d'obtenir le verrou /var/cache/apt/archives/lock - open (11: Ressource temporairement non disponible)

E: Impossible de verrouiller le répertoire /var/cache/apt/archives/

Cette erreur arrive si tu as lancé en même temps un autre gestionnaire de paquet tel que synaptic ou la logithèque ubuntu.
Ca peut arriver également au démarrage lors du controle automatique des mises à jours disponibles.
Ca peut également arriver si synaptic ou la logithèque ubuntu a quitté brutalement et donc le fichier lock est toujours présent. Dans ce cas il faut supprimer le lock à la main.

Que donne un
sudo apt-get update
Quel est ton problème de dépendances ?

Hors ligne

#49 Le 26/06/2013, à 18:10

malbo

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

ClaireK a écrit :

et si tu choisis à nouveau de désactiver, une fenêtre de dialogue s'ouvre ( interface laide, comme le reste style BIOS) et on te demande de retaper 4 chiffres qu'on te montre dans cette fenêtre de dialogue pour confirmer ton action.

Fallait le trouver ça et c'est HP qui l'a inventé...C'est peut-être bien vrai qu'ils sont très cons (voir cette discussion)

Dernière modification par malbo (Le 26/06/2013, à 18:13)

Hors ligne

#50 Le 26/06/2013, à 19:25

ClaireK

Re : Installer Ubuntu sur un PC portable tactile/RESOLU.

Voilà, Malbo, toi le Kador du Bios et du Boot, tu n'es pas arrivé au bout de ta peine car les mecs sont futés en matière de R&D "Comment enquiquiner les utilisateurs".
Je crois que nos chemins se séparent là pour le moment vu que mes install sont maintenant terminées. Merci pour ton aide.
Je pars voguer sur les eaux troubles du tactile pas vraiment tactile pour le moment.

Pour se recentrer sur le sujet, je me retrouve donc avec un PC qui n'est plus tactile du tout alors que mes maigres expériences d'il y a 2 jours m'ont montré que c'était possible et chouette en plus!!!!
Dois-je en conclure qu'en retirant Windows pour de bon, le PC a perdu ses qualités ?
Je n'ose le croire.
Dans les gestionnaires de paquetages, tous les paquets concernés sont pourtant cochés.
HELP!!!!!!!!

Hors ligne