#26 Le 25/06/2013, à 12:34
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Coucou,
Je viens de lancer le boot repair en me laissant guider par le choix de l'ordi.
Voici qu'une erreur a été signalée. Voici le rapport de bug:
erreur boot-repair
Hors ligne
#27 Le 25/06/2013, à 13:58
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bonjour à tous,
Je me permets de revenir vers vous pour vous tenir informés de l'avancée de mes travaux.
D'abord, une méga surprise. Alors que je fermais ma session de test sur l'ordi tactile et que je m'apprêtais à le rallumer avec Windows puisque mon install réelle n'avait pas pu aller à son terme hier soir, quelle ne fut pas ma surprise lorsqu'au moment du redémarrage, on me donnait le choix entre Kubuntu et Windows sur un écran noir!!!
J'ai donc opté pour Kubuntu et là, finie la version test, c'est le vrai Kubuntu qui se lance.
Il semblerait que le boot-repair ait fonctionné malgré le message d'erreur qui était apparu.
Cependant, la "mauvaise" nouvelle c'est que je n'arrive pas à charger ni par le gestionnaire de paquetages ni par la console le fameux "xserver-xorg-input-evtouch" qui semble être le sésame vers une utilisation fluide du tactile. On me dit qu'on ne le trouve pas.
Alors, pour le moment, j'ai un peu de tactile mais vraiment limité. Tout ce qui est présent sur le bureau (recherche et lancement) ne se laisse pas cliquer, les icônes ne sont pas "cliquables".
Je n'ai pas non plus de clavier virtuel digital au moment de taper les entrées.
Ce qui fonctionne en revanche ce sont les ouvertures, les fermetures, les redimensionnements de fenêtres, les onglets sur la page Google.
Voilà, Messieurs. Ca avance petit à petit.
Je dois vous laisser pour le moment mais ne manquerai pas de vous tenir informés de l'avancée des travaux.
Merci de votre attention, CK.
Hors ligne
#28 Le 25/06/2013, à 14:46
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Voici le Boot-Info dont tu as donné le lien dans ton post #26 :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 3June2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi
/EFI/kubuntu/grubx64.efi
/EFI/HP/BIOSUpdate/CryptRSA.efi
/EFI/HP/BIOSUpdate/CryptRSA32.efi
/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
/EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/HP/SystemDiags/SystemDiags32.efi
/EFI/HP/boot/bootmgfw.efi /EFI/HP/boot/bootmgr.efi
/EFI/HP/boot/memtest.efi
/EFI/Microsoft/Boot/bkpbootmgfw.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/bootx64.efi
/EFI/Microsoft/Boot/memtest.efi
/EFI/HP/EFI/Boot/bootx64.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/ubuntu/winboot/wubildr /ubuntu/winboot/wubildr.mbr
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/BCD
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /etc/fstab
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20130218
Boot sector info: Syslinux looks at sector 1986880 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2288.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 821,247 819,200 Windows Recovery Environment (Windows)
/dev/sda2 821,248 1,353,727 532,480 EFI System partition
/dev/sda3 1,353,728 1,615,871 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 1,615,872 390,706,460 389,090,589 Data partition (Windows/Linux)
/dev/sda5 1,416,255,488 1,465,147,391 48,891,904 Data partition (Windows/Linux)
/dev/sda6 390,707,200 528,979,138 138,271,939 Data partition (Windows/Linux)
/dev/sda7 1,408,978,944 1,416,255,487 7,276,544 Swap partition (Linux)
/dev/sda8 528,979,968 1,408,978,943 879,998,976 Data partition (Windows/Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,288 31,457,279 31,454,992 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 56E69B1FE69AFE85 ntfs WINRE
/dev/sda2 E62F-8185 vfat
/dev/sda4 CE9EDF449EDF242D ntfs
/dev/sda5 409C985D9C984F72 ntfs RECOVERY
/dev/sda6 14f640c3-9a09-4f7b-94a3-e36dc6d25468 ext4
/dev/sda7 9e0d9ae6-9d2b-40f6-98ad-15467a4e963f swap
/dev/sda8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f ext4
/dev/sdb1 BDDC-A0D3 vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 14f640c3-9a09-4f7b-94a3-e36dc6d25468
else
search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Kubuntu GNU/Linux' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 14f640c3-9a09-4f7b-94a3-e36dc6d25468
else
search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
fi
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 ro
initrd /boot/initrd.img-3.8.0-19-generic
}
submenu 'Advanced options for Kubuntu GNU/Linux' $menuentry_id_option 'gnulinux-advanced-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 14f640c3-9a09-4f7b-94a3-e36dc6d25468
else
search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 ro
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-14f640c3-9a09-4f7b-94a3-e36dc6d25468' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 14f640c3-9a09-4f7b-94a3-e36dc6d25468
else
search --no-floppy --fs-uuid --set=root 14f640c3-9a09-4f7b-94a3-e36dc6d25468
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/HP/BIOSUpdate/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/CryptRSA32.efi
}
menuentry "EFI/HP/BIOSUpdate/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/CryptRSA.efi
}
menuentry "EFI/HP/BIOSUpdate/HpBiosUpdate32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
}
menuentry "EFI/HP/BIOSUpdate/HpBiosUpdate.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
}
menuentry "EFI/HP/boot/bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/boot/bootmgfw.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA32.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA.efi
}
menuentry "EFI/HP/SystemDiags/SystemDiags32.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags32.efi
}
menuentry "EFI/HP/SystemDiags/SystemDiags.efi" {
search --fs-uuid --no-floppy --set=root E62F-8185
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-CE9EDF449EDF242D' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 CE9EDF449EDF242D
else
search --no-floppy --fs-uuid --set=root CE9EDF449EDF242D
fi
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows Recovery Environment (loader) (on /dev/sda5)' --class windows --class os $menuentry_id_option 'osprober-chain-409C985D9C984F72' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 409C985D9C984F72
else
search --no-floppy --fs-uuid --set=root 409C985D9C984F72
fi
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Ubuntu 13.04 (13.04)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img
}
submenu 'Advanced options for Ubuntu 13.04 (13.04)' $menuentry_id_option 'osprober-gnulinux-advanced-5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img
}
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img
}
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img.old
}
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-19-generic--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /boot/vmlinuz-3.8.0-19-generic root=/dev/sda8
initrd /boot/initrd.img-3.8.0-19-generic
}
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img
}
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img
}
menuentry 'Ubuntu 13.04 (13.04) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5d6d3cf7-de84-41c4-81f9-cf1c33627f1f' {
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
else
search --no-floppy --fs-uuid --set=root 5d6d3cf7-de84-41c4-81f9-cf1c33627f1f
fi
linux /vmlinuz root=/dev/sda8
initrd /initrd.img.old
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=14f640c3-9a09-4f7b-94a3-e36dc6d25468 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
#UUID=E62F-8185 /boot/efi vfat defaults 0 1
# swap was on /dev/sda7 during installation
UUID=9e0d9ae6-9d2b-40f6-98ad-15467a4e963f none swap sw 0 0
UUID=E62F-8185 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
208.446212769 = 223.817416704 boot/grub/grub.cfg 1
208.437896729 = 223.808487424 boot/vmlinuz-3.8.0-19-generic 1
208.437896729 = 223.808487424 vmlinuz 1
187.754993439 = 201.600389120 boot/initrd.img-3.8.0-19-generic 1
187.754993439 = 201.600389120 initrd.img 1
=============================== sda8/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda8 during installation
UUID=5d6d3cf7-de84-41c4-81f9-cf1c33627f1f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=E62F-8185 /boot/efi vfat defaults 0 1
# swap was on /dev/sda7 during installation
UUID=9e0d9ae6-9d2b-40f6-98ad-15467a4e963f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda8: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
408.376014709 = 438.490406912 boot/vmlinuz-3.8.0-19-generic 1
408.376014709 = 438.490406912 vmlinuz 1
253.594837189 = 272.295383040 boot/initrd.img-3.8.0-19-generic 2
253.594837189 = 272.295383040 initrd.img 2
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Start Kubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry2
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry3
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry4
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry5
menu label Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry6
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
label ubnentry7
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/27135/mounts) leaked on lvscan invocation. Parent PID 8961: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-25__12h30 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: impossible d'accéder à /home/usr/.config: Aucun fichier ou dossier de ce type
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda4:Windows 8 (loader):Windows:chain
/dev/sda5:Windows Recovery Environment (loader):Windows1:chain
/dev/sda6:Ubuntu 13.04 (13.04):Ubuntu:linux
/dev/sda8:Ubuntu 13.04 (13.04):Ubuntu1:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="WINRE" UUID="56E69B1FE69AFE85" TYPE="ntfs"
/dev/sda2: UUID="E62F-8185" TYPE="vfat"
/dev/sda4: UUID="CE9EDF449EDF242D" TYPE="ntfs"
/dev/sda5: LABEL="RECOVERY" UUID="409C985D9C984F72" TYPE="ntfs"
/dev/sda6: UUID="14f640c3-9a09-4f7b-94a3-e36dc6d25468" TYPE="ext4"
/dev/sda7: UUID="9e0d9ae6-9d2b-40f6-98ad-15467a4e963f" TYPE="swap"
/dev/sda8: UUID="5d6d3cf7-de84-41c4-81f9-cf1c33627f1f" TYPE="ext4"
/dev/sdb1: UUID="BDDC-A0D3" TYPE="vfat"
1 disks with OS, 4 OS : 2 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== No kernel in /mnt/boot-sav/sda2/boot:
boot.sdi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 24 21:37 grub.d
total 72
-rwxr-xr-x 1 root root 7541 avril 9 09:29 00_header
-rwxr-xr-x 1 root root 5974 avril 9 08:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril 9 09:29 10_linux
-rwxr-xr-x 1 root root 10258 avril 9 09:29 20_linux_xen
-rwxr-xr-x 1 root root 1688 déc. 5 2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril 9 09:29 30_os-prober
-rwxr-xr-x 1 root root 1426 avril 9 09:29 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 9 09:29 40_custom
-rwxr-xr-x 1 root root 216 avril 9 09:29 41_custom
-rw-r--r-- 1 root root 483 avril 9 09:29 README
/boot/efi detected in the fstab of sda6: UUID=E62F-8185 (sda2)
=================== sda8/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda8/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 24 21:37 grub.d
total 72
-rwxr-xr-x 1 root root 7541 avril 9 09:29 00_header
-rwxr-xr-x 1 root root 5974 avril 9 08:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril 9 09:29 10_linux
-rwxr-xr-x 1 root root 10258 avril 9 09:29 20_linux_xen
-rwxr-xr-x 1 root root 1688 déc. 5 2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril 9 09:29 30_os-prober
-rwxr-xr-x 1 root root 1426 avril 9 09:29 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 9 09:29 40_custom
-rwxr-xr-x 1 root root 216 avril 9 09:29 41_custom
-rw-r--r-- 1 root root 483 avril 9 09:29 README
/boot/efi detected in the fstab of sda8: UUID=E62F-8185 (sda2)
efibootmgr -v
gui-g2slaunch.sh: ligne 127: efibootmgr : commande introuvable
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-kernel, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, grubenv-ok grub2, grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda8 : sda, not-sepboot, grubenv-ok grub2, grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda8.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 420MB 419MB ntfs Basic data partition hidden, diag
2 420MB 693MB 273MB fat32 EFI system partition boot
3 693MB 827MB 134MB Microsoft reserved partition msftres
4 827MB 200GB 199GB ntfs Basic data partition
6 200GB 271GB 70.8GB ext4
8 271GB 721GB 451GB ext4
7 721GB 725GB 3726MB linux-swap(v1)
5 725GB 750GB 25.0GB ntfs Basic data partition hidden
Model: Generic Flash Disk (scsi)
Disk /dev/sdb: 16.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1171kB 16.1GB 16.1GB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:693MB:273MB:fat32:EFI system partition:boot;
3:693MB:827MB:134MB::Microsoft reserved partition:msftres;
4:827MB:200GB:199GB:ntfs:Basic data partition:;
6:200GB:271GB:70.8GB:ext4::;
8:271GB:721GB:451GB:ext4::;
7:721GB:725GB:3726MB:linux-swap(v1)::;
5:725GB:750GB:25.0GB:ntfs:Basic data partition:hidden;
BYT;
/dev/sdb:16.1GB:scsi:512:512:msdos:Generic Flash Disk;
1:1171kB:16.1GB:16.1GB:fat32::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
/dev/sda8 on /mnt/boot-sav/sda8 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hidraw0 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 7f 0c 00 00 00 00 00 |................|
00000030 55 85 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 85 fe 9a e6 1f 9b e6 56 |...............V|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
ls /mnt/boot-sav/sda2: boot
EFI
GraphicsLib.Log . Veuillez indiquer ce message à boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 fe 1b |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 88 0c 00 |........?.......|
00000020 00 20 08 00 01 02 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 85 81 2f e6 4e 4f 20 4e 41 4d 45 20 20 |..)../.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 18 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 10 0d 31 17 00 00 00 00 |..........1.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 2d 24 df 9e 44 df 9e ce |........-$..D...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 58 6a 54 |........?....XjT|
00000020 00 00 00 00 80 00 80 00 ff 07 ea 02 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 72 4f 98 9c 5d 98 9c 40 |........rO..]..@|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.7G 1.2G 462M 73% /
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 336M 892K 335M 1% /run
/dev/sdb1 vfat 15G 956M 15G 7% /cdrom
/dev/loop0 squashfs 869M 869M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.7G 144K 1.7G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1.7G 80K 1.7G 1% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 fuseblk 400M 265M 136M 67% /mnt/boot-sav/sda1
/dev/sda2 vfat 256M 89M 168M 35% /mnt/boot-sav/sda2
/dev/sda4 fuseblk 186G 80G 106G 43% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 24G 21G 2.9G 88% /mnt/boot-sav/sda5
/dev/sda6 ext4 65G 3.3G 59G 6% /mnt/boot-sav/sda6
/dev/sda8 ext4 413G 3.4G 389G 1% /mnt/boot-sav/sda8
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9cdef191
Device Boot Start End Blocks Id System
/dev/sda1 1 1465149167 732574583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b6f4b
Device Boot Start End Blocks Id System
/dev/sdb1 * 2288 31457279 15727496 b W95 FAT32
EFI détecté. Veuillez vérifier les options.
=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda6, using the following options: sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s backup-and-rename-efi-files
=================== Settings chosen by the user
Custom-Repair
This setting will reinstall the grub-efi of sda6, using the following options: sda2/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s backup-and-rename-efi-files
/boot/efi added in sda6/fstab
Mount sda2 on /mnt/boot-sav/sda6/boot/efi
ls /mnt/boot-sav/sda6/boot/efi: boot
EFI
GraphicsLib.Log . Veuillez indiquer ce message à boot.repair@gmail.com
No sda6/boot/efi/efi/ubuntu/ folder
Unhide GRUB boot menu in sda6/etc/default/grub
grub-install (GRUB) 2.00-13ubuntu3,grub-install (GRUB) 2.
chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,3001,2002,2003
Boot0000* Disque dur USB (UEFI) - Generic Flash Disk ACPI(a0341d0,0)PCI(10,0)USB(3,0)HD(1,8f0,1dff710,219b6f4b)RC
Boot0001* Windows Boot Manager HD(2,c8800,82000,77dd6f3d-5741-4f07-93cc-ffedda31ed06)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot2001* USB Drive (UEFI) RC
Boot3001* Internal Hard Disk or Solid State Disk RC
Reinstall the grub-efi of sda6
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :1
(debug) beglsefi1 kubuntu/grubx64.efi ; kubuntu , /mnt/boot-sav/sda6/boot/efi .
ls /mnt/boot-sav/sda6/boot/efi: boot
EFI
GraphicsLib.Log . Veuillez indiquer ce message à boot.repair@gmail.com
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/kubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
df /dev/sda2
cp /mnt/boot-sav/sda6/boot/efi/EFI/kubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/sda2
Save and rename /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi (/mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi)
cp /mnt/boot-sav/sda6/boot/efi/EFI/kubuntu/grubx64.efi /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bootx64.efi
ls /mnt/boot-sav/sda6/boot/efi: boot
EFI
GraphicsLib.Log . Veuillez indiquer ce message à boot.repair@gmail.com
Add /mnt/boot-sav/sda6/boot/efi efi entries in /mnt/boot-sav/sda6/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi
sda2//mnt/boot-sav/sda6/boot/efi/EFI/Boot/bkpbootx64.efi already added
sda2//mnt/boot-sav/sda6/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi already added
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/boot/bootmgfw.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/CryptRSA.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/SystemDiags32.efi
Adding custom /mnt/boot-sav/sda6/boot/efi/EFI/HP/SystemDiags/SystemDiags.efi
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :1
chroot /mnt/boot-sav/sda6 efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,3001,2002,2003
Boot0000* Disque dur USB (UEFI) - Generic Flash Disk ACPI(a0341d0,0)PCI(10,0)USB(3,0)HD(1,8f0,1dff710,219b6f4b)RC
Boot0001* Windows Boot Manager HD(2,c8800,82000,77dd6f3d-5741-4f07-93cc-ffedda31ed06)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...I................
Boot2001* USB Drive (UEFI) RC
Boot3001* Internal Hard Disk or Solid State Disk RC
chroot /mnt/boot-sav/sda6 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.8.0-19-generic
Found initrd image: /boot/initrd.img-3.8.0-19-generic
Found Windows 8 (loader) on /dev/sda4
Found Windows Recovery Environment (loader) on /dev/sda5
Found Ubuntu 13.04 (13.04) on /dev/sda8
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda6/boot/grub/grub.cfg
Une erreur est survenue pendant la réparation.
Vous pouvez maintenant redémarrer votre ordinateur.
Effectivement, il y a quelques passages* très déconcertants et je n'avais pas de solution à te donner. Heureusement qu'une guérison miraculeuse s'est opérée.
*en particulier, ceci :
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :1
Dernière modification par malbo (Le 25/06/2013, à 14:46)
Hors ligne
#29 Le 25/06/2013, à 16:16
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Hello Malbo,
Que signifie cette ligne déconcertante selon toi ?
Penses-tu qu'avec une telle config' de base, mon ordi aurait dû exploser ?
ah ah ah...
Je dois admettre qu'au démarrage, après le choix Kubuntu ou Windows, je vois défiler pas mal d'infos sur écran noir au lieu d'avoir un bel écran d'accueil coloré.
Ah, mince, je viens de redémarrer pour mettre à jour les logiciels installés et là, patatra, je reste coincée sur cet écran noir jms@jms:~$ et là, j'ai beau faire des sudo apt-get update, upgrade et autres, rien ne vient, tout semble impossible (message= qq chose d'imprévisible est survenu lors de la détermination de "blablabla" (-11-erreur système).
Bon, Malbo, tu avais vu juste, il y a qq chose de déconcertant. Et là, je suis coincée.
En tout cas, en activant le pilote supplémentaire "AMD", les icônes de mon bureau sont devenues cliquables et presque tout fonctionnait en tactile, sauf l'apparition du clavier virtuel quand j'en ai besoin pour entrer mes mots-clés. Mais je progresse petit à petit.
A+.
Hors ligne
#30 Le 25/06/2013, à 17:29
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Il semblerait que ce soit la mise en action du pilote AMD qui ait fait capoter le reste. Lors du redémarrage, plus rien, impossible d'entrer sur l'interface graphique.
Pourtant, c'était vachement mieux depuis que je l'avais activé question tactile...
J'ai fait exprès de refaire la même manip' en choisissant "Ubuntu" au démarrage (sur une autre partition, au même titre que Windows, mode sans échec, etc...)
Ca m'a donné le même résultat.
Sous peu, quand mes petits nerfs se seront remis, je relancerai une vraie install depuis ma clé usb, pas juste la version de test et je verrai si ça change qq chose.
En me baladant sur le forum, j'ai compris que mon écran n'était plus reconnu et que le changement de config' l'avait perdu dans les limbes...Mais je ne sais pas comment faire depuis le mode console pour relancer une bonne config' de l'écran. Je vais arrêter là et préfère relancer une install'.
A+. CK.
Hors ligne
#31 Le 25/06/2013, à 18:21
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Je vais arrêter là et préfère relancer une install'.
Il conviendrait que tu arrêtes d'empiler les installations. Je m'explique : dans le Boot-Info du post #28, tu peux voir :
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /etc/fstab
Ce qui signifie que tu as actuellement deux installations de Ubuntu 13.04 : une sur la partition sda6 et une autre sur la partition sda8. Cela commence à faire beaucoup et si tu veux réinstaller, je t'engage à réutiliser la partition sda6 pour cette nouvelle installation. A l'étape 3 de l'installation, il faudra sélectionner "Autre chose" et ensuite, il faudra modifier la ligne sda6 pour définir qu'elle soit la partition racine de l'installation nouvelle. Ainsi l'installation écrasera ce qui est actuellement dans la partition sda6 pour y installer la nouvelle partition racine.
A noter que tu n'auras pas besoin de définir quoi que ce soit d'autre, ni pour la swap, ni pour l'emplacement du chargeur d'amorçage (tu ne modifies rien : tu laisses comme c'est)
Dernière modification par malbo (Le 25/06/2013, à 18:27)
Hors ligne
#32 Le 25/06/2013, à 21:48
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bonsoir,
Tout allait plutôt pas mal dans l'aprèm' mais là, c'est le drame....
Certaine que le dual-boot m'empêchait d'installer convenablement Kubuntu, j'étais donc décidée à le virer.
Je relance donc une nouvelle install' mais cette fois, en utilisant la totalité du disque, sans recréer de nouvelles partitions.
Mais là, encore, message d'erreur "grub/EFI " ne peut pas être installé dans /target.
J'ai pourtant désactivé le Secure boot avant de lancer l'install.
Je me retrouve donc avec un seul système en état de marche, la session de ma clé USB.
Snif, snif.
http://paste.ubuntu.com/5799515/
Hors ligne
#33 Le 25/06/2013, à 22:04
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Ton Boot-Info ( http://paste.ubuntu.com/5799515/ ) est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 3June2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 2048.
Operating System:
Boot files: /EFI/kubuntu/grubx64.efi /EFI/kubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20130218
Boot sector info: Syslinux looks at sector 1986880 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2288.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 194,559 192,512 EFI System partition
/dev/sda2 194,560 1,457,870,847 1,457,676,288 Data partition (Windows/Linux)
/dev/sda3 1,457,870,848 1,465,147,391 7,276,544 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,288 31,457,279 31,454,992 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 0A2C-AEED vfat
/dev/sda2 1ee08611-670d-473b-ab65-da144e3ada24 ext4
/dev/sda3 6b8492e1-d9cb-4c60-90de-59d91f7b363a swap
/dev/sdb1 BDDC-A0D3 vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=1ee08611-670d-473b-ab65-da144e3ada24 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0A2C-AEED /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=6b8492e1-d9cb-4c60-90de-59d91f7b363a none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
68.226959229 = 73.258139648 boot/vmlinuz-3.8.0-19-generic 1
68.226959229 = 73.258139648 vmlinuz 1
520.544055939 = 558.929924096 boot/initrd.img-3.8.0-19-generic 2
520.544055939 = 558.929924096 initrd.img 2
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Start Kubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry2
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry3
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry4
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry5
menu label Start Kubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry6
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
label ubnentry7
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 6 (/proc/6520/mounts) leaked on lvscan invocation. Parent PID 13163: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-26__03h38 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in live-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 13.04 (13.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="0A2C-AEED" TYPE="vfat"
/dev/sda2: UUID="1ee08611-670d-473b-ab65-da144e3ada24" TYPE="ext4"
/dev/sda3: UUID="6b8492e1-d9cb-4c60-90de-59d91f7b363a" TYPE="swap"
/dev/sdb1: UUID="BDDC-A0D3" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 24 21:37 grub.d
total 72
-rwxr-xr-x 1 root root 7541 avril 9 09:29 00_header
-rwxr-xr-x 1 root root 5974 avril 9 08:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril 9 09:29 10_linux
-rwxr-xr-x 1 root root 10258 avril 9 09:29 20_linux_xen
-rwxr-xr-x 1 root root 1688 déc. 5 2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril 9 09:29 30_os-prober
-rwxr-xr-x 1 root root 1426 avril 9 09:29 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 9 09:29 40_custom
-rwxr-xr-x 1 root root 216 avril 9 09:29 41_custom
-rw-r--r-- 1 root root 483 avril 9 09:29 README
/boot/efi detected in the fstab of sda2: UUID=0A2C-AEED (sda1)
efibootmgr -v
gui-g2slaunch.sh: line 127: efibootmgr: command not found
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 99.6MB 98.6MB fat32 boot
2 99.6MB 746GB 746GB ext4
3 746GB 750GB 3726MB linux-swap(v1)
Model: Generic Flash Disk (scsi)
Disk /dev/sdb: 16.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1171kB 16.1GB 16.1GB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:99.6MB:98.6MB:fat32::boot;
2:99.6MB:746GB:746GB:ext4::;
3:746GB:750GB:3726MB:linux-swap(v1)::;
BYT;
/dev/sdb:16.1GB:scsi:512:512:msdos:Generic Flash Disk;
1:1171kB:16.1GB:16.1GB:fat32::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
ls /mnt/boot-sav/sda1: /*/*/*/*
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 64 6f 73 66 73 00 00 02 01 20 00 |.X.mkdosfs.... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 f0 02 00 c9 05 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 00 29 ed ae 2c 0a 20 20 20 20 20 20 20 20 20 |..)..,. |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.7G 391M 1.3G 24% /
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 336M 848K 335M 1% /run
/dev/sdb1 vfat 15G 956M 15G 7% /cdrom
/dev/loop0 squashfs 869M 869M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.7G 52K 1.7G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1.7G 80K 1.7G 1% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 vfat 93M 1.5M 92M 2% /mnt/boot-sav/sda1
/dev/sda2 ext4 685G 2.9G 647G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9cdef191
Device Boot Start End Blocks Id System
/dev/sda1 1 1465149167 732574583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 16.1 GB, 16106127360 bytes
32 heads, 57 sectors/track, 17246 cylinders, total 31457280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b6f4b
Device Boot Start End Blocks Id System
/dev/sdb1 * 2288 31457279 15727496 b W95 FAT32
EFI détecté. Veuillez vérifier les options.
=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s backup-and-rename-efi-files
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Manifestement, l'ordi résiste héroïquement (et toi aussi). Je te suggère d'utiliser la procédure que j'indique dans ce lien pour réaliser un CD ou un DVD de Super Grub2 Disk : http://forum.ubuntu-fr.org/viewtopic.php?id=1287711
Cet outil est capable d'aller sniffer toutes les installation de Ubuntu.
Important : je n'ai pas réussi malgré beaucoup de bonne volonté à faire fonctionner Super Grub2 Disk en liveUSB (ça m'aurait bien intéressé) : je te prie donc de ne pas perdre ton temps à essayer de la faire et à réaliser le liveCD (ou le liveDVD) comme je te propose.
Dernière modification par malbo (Le 25/06/2013, à 22:19)
Hors ligne
#34 Le 25/06/2013, à 22:11
- kikislater
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bonjour Claire,
Moi ce que je vois c'est une erreur d'installation :
=> No boot loader is installed in the MBR of /dev/sda.
Tu as installé grub sur /dev/sdb qui est ta clé usb de 16go je présume (/dev/sda ton disque dur interne). Lors de l'installation il est demandé où installer grub.
Je vais recevoir le même netbook mais dans 10jours. Dès lors je pourrais t'aider mais pas avant.
Essaie aussi de désactiver des fonctions dans le bios : quickboot / fastboot et Intel SRT (Smart Response Technology) si jamais ça ne fonctionne toujours pas.
Hors ligne
#35 Le 25/06/2013, à 22:16
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
@kikislater : tu peux aller te recoucher car tu n'y es pas du tout : c'est une installation en mode UEFI
Hors ligne
#36 Le 25/06/2013, à 22:17
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bonsoir Kikislater,
Je peux attendre les 10 jours...Pas de problème.
Là, j'ai réussi à lancer Kubuntu sans ma clé USB donc direct sur le HDD mais toutes les modifications que j'apporte se soldent par "an error occured while applying changes" et à chaque fois, le détail montre "grub-efi-amd64" subprocess installed post-installation script returned error exit status 1
grub-efi
dependency problems-leaving unconfigured.
Bon et toi aussi tu penses te séparer de Windows ?
N'hésite pas à me tenir au courant. Je trépigne déjà d'impatience.
Bonne soirée, Claire.
Hors ligne
#37 Le 25/06/2013, à 22:22
- kikislater
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
@kikislater : tu peux aller te recoucher car tu n'y es pas du tout : c'est une installation en mode UEFI
Pas besoin d'aller me coucher je suis frais comme un gardon ... Et il fut y aller mollo t'es sur un forum garçon, chacun a le droit de porter son avis. J'ai un portable UEFI aussi et hp qui plus est ... donc no comment !
Alors le /dev/sdb c'est quoi pour toi malbo ? Claire ta clé usb pour le live ubuntu fait quelle capacité ? 16go ?
Dernière modification par kikislater (Le 25/06/2013, à 22:22)
Hors ligne
#38 Le 25/06/2013, à 22:23
- kikislater
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bon et toi aussi tu penses te séparer de Windows ?
Bien sur jamais de windows chez moi ! ça fait parti de mon métier également
Hors ligne
#39 Le 25/06/2013, à 22:39
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
@kikislater : c'est plus grave que je pensais alors. Dans une installation en UEFI, on n'installe pas dans le MBR du disque dur : c'est donc normal qu'on puisse voir "=> No boot loader is installed in the MBR of /dev/sda." et ce n'est pas une erreur d'installation comme tu l'as écrit.
Hors ligne
#40 Le 26/06/2013, à 09:39
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
ClaireK,
J'ai regardé plus attentivement ton Boot-Info et je te propose de laisser tomber pour l'instant ma proposition du post #33 d'utiliser Super Grub2 Disk. A la place, je te propose de réaliser ce que je vais détailler ci-dessous.
Tu démarres sur ta liveUSB Ubuntu 13.04 en session live (choix "Essayer Ubuntu") puis tu passes la commande suivante (installation du paquet efibootmgr) :
sudo apt-get install efibootmgr
Tu laisses se faire l'installation puis tu peux passer la commande suivante :
sudo efibootmgr -v
Et tu pourras poster le résultat obtenu suite à cette commande ( ce résultat contient en principe les instructions de démarrage de l'UEFI avec l'ordre de démarrage et le détail de toutes les possibilités de démarrage) dans ta réponse à ce message
Ensuite, sans quitter la session (pour profiter de l'installation du paquet efibootmgr), tu peux faire ton Boot-Info comme tu fais d'habitude et poster également l'URL de ce Boot-Info. Normalement, le contenu de ce rapport devrait donner les infos supplémentaires grâce à l'installation préalable de efibootmgr.
Dernière modification par malbo (Le 26/06/2013, à 09:44)
Hors ligne
#41 Le 26/06/2013, à 11:06
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bonjour Malbo,
Pour répondre à ta question,
1) suite à la manipulation que tu m'as demandé de faire, voici le résultat:
jms@jms-HP-Pavilion:~$ sudo apt-get install efibootmgr
[sudo] password for jms:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
efibootmgr est déjà la plus récente version disponible.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
2 partiellement installés ou enlevés.
E: Impossible d'obtenir le verrou /var/cache/apt/archives/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire /var/cache/apt/archives/
jms@jms-HP-Pavilion:~$ sudo efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 3000,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,800,2f000,aa6474ff-fe4e-49ee-bc36-8cc512b0ee03)File(\EFI\Microsoft\Boot\bootmgfw.efi)RC
Boot2001* USB Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
jms@jms-HP-Pavilion:~$
2) Après le boot-repair demandé, voici le résultat: www.paste.ubuntu.com/5800944/
Ce qui ressort immédiatement, c'est "grub-efi-amd64" et "grub-efi" ont rencontré des erreurs...
A+, bonne matinée. Claire.
Hors ligne
#42 Le 26/06/2013, à 11:20
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Je colle ci-dessous ton dernier Boot-Info ( http://paste.ubuntu.com/5800944/ ):
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 3June2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 2048.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/kubuntu/grubx64.efi
/EFI/kubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 194,559 192,512 EFI System partition
/dev/sda2 194,560 1,457,870,847 1,457,676,288 Data partition (Windows/Linux)
/dev/sda3 1,457,870,848 1,465,147,391 7,276,544 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 0A2C-AEED vfat
/dev/sda2 1ee08611-670d-473b-ab65-da144e3ada24 ext4
/dev/sda3 6b8492e1-d9cb-4c60-90de-59d91f7b363a swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 1ee08611-670d-473b-ab65-da144e3ada24
else
search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Kubuntu GNU/Linux' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1ee08611-670d-473b-ab65-da144e3ada24' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 1ee08611-670d-473b-ab65-da144e3ada24
else
search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro
initrd /boot/initrd.img-3.8.0-25-generic
}
submenu 'Advanced options for Kubuntu GNU/Linux' $menuentry_id_option 'gnulinux-advanced-1ee08611-670d-473b-ab65-da144e3ada24' {
menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-25-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-25-generic-advanced-1ee08611-670d-473b-ab65-da144e3ada24' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 1ee08611-670d-473b-ab65-da144e3ada24
else
search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
echo 'Loading Linux 3.8.0-25-generic ...'
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-25-generic
}
menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-25-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-25-generic-recovery-1ee08611-670d-473b-ab65-da144e3ada24' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 1ee08611-670d-473b-ab65-da144e3ada24
else
search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
echo 'Loading Linux 3.8.0-25-generic ...'
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-25-generic
}
menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-1ee08611-670d-473b-ab65-da144e3ada24' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 1ee08611-670d-473b-ab65-da144e3ada24
else
search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
menuentry 'Kubuntu GNU/Linux, with Linux 3.8.0-19-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-1ee08611-670d-473b-ab65-da144e3ada24' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 1ee08611-670d-473b-ab65-da144e3ada24
else
search --no-floppy --fs-uuid --set=root 1ee08611-670d-473b-ab65-da144e3ada24
fi
echo 'Loading Linux 3.8.0-19-generic ...'
linux /boot/vmlinuz-3.8.0-19-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.8.0-19-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=1ee08611-670d-473b-ab65-da144e3ada24 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=0A2C-AEED /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=6b8492e1-d9cb-4c60-90de-59d91f7b363a none swap sw 0 0
UUID=0A2C-AEED /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
320.219203949 = 343.832752128 boot/grub/grub.cfg 1
3.168075562 = 3.401695232 boot/vmlinuz-3.8.0-19-generic 1
3.191513062 = 3.426861056 boot/vmlinuz-3.8.0-25-generic 1
3.191513062 = 3.426861056 vmlinuz 1
3.191513062 = 3.426861056 vmlinuz.old 1
5.138015747 = 5.516902400 boot/initrd.img-3.8.0-19-generic 1
520.887409210 = 559.298596864 boot/initrd.img-3.8.0-25-generic 1
520.887409210 = 559.298596864 initrd.img 1
520.887409210 = 559.298596864 initrd.img.old 1
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/18556/mounts) leaked on lvscan invocation. Parent PID 25240: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-26__11h02 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in installed-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic root=UUID=1ee08611-670d-473b-ab65-da144e3ada24 ro
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 13.04 CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="0A2C-AEED" TYPE="vfat"
/dev/sda2: UUID="1ee08611-670d-473b-ab65-da144e3ada24" TYPE="ext4"
/dev/sda3: UUID="6b8492e1-d9cb-4c60-90de-59d91f7b363a" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 24 23:37 grub.d
total 72
-rwxr-xr-x 1 root root 7541 avril 9 11:29 00_header
-rwxr-xr-x 1 root root 5974 avril 9 10:53 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril 9 11:29 10_linux
-rwxr-xr-x 1 root root 10258 avril 9 11:29 20_linux_xen
-rwxr-xr-x 1 root root 1688 déc. 5 2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril 9 11:29 30_os-prober
-rwxr-xr-x 1 root root 1426 avril 9 11:29 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 9 11:29 40_custom
-rwxr-xr-x 1 root root 216 avril 9 11:29 41_custom
-rw-r--r-- 1 root root 483 avril 9 11:29 README
/boot/efi detected in the fstab of sda2: UUID=0A2C-AEED (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 3000,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,800,2f000,aa6474ff-fe4e-49ee-bc36-8cc512b0ee03)File(EFIMicrosoftBootbootmgfw.efi)RC
Boot2001* USB Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
=================== UEFI/Legacy mode:
No EFI in dmseg. Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 99.6MB 98.6MB fat32 boot
2 99.6MB 746GB 746GB ext4
3 746GB 750GB 3726MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:99.6MB:98.6MB:fat32::boot;
2:99.6MB:746GB:746GB:ext4::;
3:746GB:750GB:3726MB:linux-swap(v1)::;
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
/dev/sda1 on /boot/efi type vfat (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 shm snapshot snd stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
ls /boot/efi:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 64 6f 73 66 73 00 00 02 01 20 00 |.X.mkdosfs.... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 f0 02 00 c9 05 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 00 29 ed ae 2c 0a 20 20 20 20 20 20 20 20 20 |..)..,. |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 685G 5.0G 645G 1% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 8.0K 1.7G 1% /dev
tmpfs tmpfs 336M 836K 335M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 148K 1.7G 1% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 vfat 93M 1.8M 91M 2% /boot/efi
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9cdef191
Device Boot Start End Blocks Id System
/dev/sda1 1 1465149167 732574583+ ee GPT
Partition 1 does not start on physical sector boundary.
EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.04] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s backup-and-rename-efi-files
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Dans cet extrait (mais ça se voit ailleurs), on peut constater que tu as fait ce Boot-Info depuis une session de ton Ubuntu installé sur le disque dur :
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-26__11h02 ===================
boot-repair version : 3.199~ppa6~raring
boot-sav version : 3.199~ppa6~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa6~raring
boot-repair is executed in installed-session (Ubuntu 13.04, raring, Ubuntu, x86_64)
alors que jusqu'ici tous tes Boot-Info avaient été faits depuis une session liveCD.
Moi, ça me va parfaitement un Boot-Info réalisé depuis la session "normale" de Ubuntu. Ce que je ne comprends pas - mais j'espère que tu vas pouvoir m'expliquer précisément - c'est comment tu peux arriver à démarrer ce Ubuntu installé sur disque dur alors que tu n'as aucune entrée dans ton système UEFI comme on le voit dans cet autre extrait de ton Boot-Info où on retrouve (c'est rassurant) la même chose que dans le résultat que tu as posté pour la commande "sudo efibootmgr -v" :
efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 3000,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,800,2f000,aa6474ff-fe4e-49ee-bc36-8cc512b0ee03)File(EFIMicrosoftBootbootmgfw.efi)RC
Boot2001* USB Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
Dernière modification par malbo (Le 26/06/2013, à 11:31)
Hors ligne
#43 Le 26/06/2013, à 13:24
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Salut à tous,
Bon, j'ai fini par réinstaller totalement Uubntu.
Si vous ne le saviez pas, avis à tous les utilisateurs de Linux sur une machine récente pré-installée avec Windows...
Dans le menu Boot Configuration (F2 ou F10 généralement au démarrage), vous devez non seulement désactiver le mode "Secure Boot" mais en plus, à la ligne inférieure, on vous demande d'entrer un genre de code à 4 chiffres pour BIEN valider votre demande. Evidemment, j'étais passée devant sans rien voir...
En ce qui me concerne, je suis persuadée que c'est ceci qui a empêché l'installation correcte de GRUB car même Windows désinstallé, on pouvait continuer à voir dans le boot un vieux souvenir de cette installation. Bref, faites bien attention à ce détail qui peut vous pourrir la vie...
Par contre, pour ce qui est du tactile, nada, rien du tout, peanuts.
Hors ligne
#44 Le 26/06/2013, à 14:24
- kikislater
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Salut à tous,
Bon, j'ai fini par réinstaller totalement Uubntu.
Si vous ne le saviez pas, avis à tous les utilisateurs de Linux sur une machine récente pré-installée avec Windows...
Dans le menu Boot Configuration (F2 ou F10 généralement au démarrage), vous devez non seulement désactiver le mode "Secure Boot" mais en plus, à la ligne inférieure, on vous demande d'entrer un genre de code à 4 chiffres pour BIEN valider votre demande. Evidemment, j'étais passée devant sans rien voir...En ce qui me concerne, je suis persuadée que c'est ceci qui a empêché l'installation correcte de GRUB car même Windows désinstallé, on pouvait continuer à voir dans le boot un vieux souvenir de cette installation. Bref, faites bien attention à ce détail qui peut vous pourrir la vie...
Par contre, pour ce qui est du tactile, nada, rien du tout, peanuts.
Déjà un bon point de réglé et je n'avais pas forcément tord quand à la mauvaise install ...
Bref pour le tactile c'est parti. Ca fonctionnait donc en live cd/usb le tactile et là rien ?
Hors ligne
#45 Le 26/06/2013, à 14:39
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Bonjour Kikislater,
Oui, tu as bien compris.
Depuis mon install propre d'Ubuntu en single boot, je n'ai rien de tactile.
D'ailleurs, je suis déjà passée à Kubuntu.
Par la console, j'ai lancé une commande qui permettrait de détecter les périphériques tactiles (j'ai déjà oublié laquelle) mais l'ordi n'a rien détecté du tout.
Ma carte graphique si ça apporte de l'eau au moulin est Gallium 0.4 on AMD Aruba.
Je suis toute ouïe pour d'éventuelles solutions. A+, merci.
Claire.
Hors ligne
#46 Le 26/06/2013, à 16:17
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Dans le menu Boot Configuration (F2 ou F10 généralement au démarrage), vous devez non seulement désactiver le mode "Secure Boot" mais en plus, à la ligne inférieure, on vous demande d'entrer un genre de code à 4 chiffres pour BIEN valider votre demande. Evidemment, j'étais passée devant sans rien voir...
Faut-il comprendre que jusque là, Secure Boot était toujours resté activé ? Pourrais-tu préciser ce que c'est que cette ligne inférieure ? Ce "code à 4 chiffres", c'est toi qui le choisis librement (comme un mot de passe) ou c'est un code fourni par le vendeur (ou le fabricant) de ton ordi que tu dois rentrer sinon tu n'as pas accès au paramètre ?
Comme tu as tout réinstallé (ça change à grande vitesse chez toi...), pourrais-tu poster ton Boot-Info actuel pour qu'on puisse voir à quoi ça ressemble ?
Dernière modification par malbo (Le 26/06/2013, à 16:19)
Hors ligne
#47 Le 26/06/2013, à 17:01
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Hello Malbo,
Un problème de dépendances m'empêche de relancer boot-repair pour le moment.
Néanmoins, bonne question de ta part...
Dans le menu boot, il y a cette ligne où l'on te demande d'activer ou non le secure-boot.
Juste en dessous de cette ligne , il y a une autre ligne à laquelle tu as accès grâce aux flèches, comme un genre de doublon, de confirmation et si tu choisis à nouveau de désactiver, une fenêtre de dialogue s'ouvre ( interface laide, comme le reste style BIOS) et on te demande de retaper 4 chiffres qu'on te montre dans cette fenêtre de dialogue pour confirmer ton action.
Alors, oui, j'imagine que c'est une protection encore plus "subtile" du fabricant de l'ordi ou du fournisseur d'OS officiel à savoir Microsoft. J'ai configuré très récemment 2 autres ordis neufs et récents de cette marque pré-installés en Windows (64 bits) et je n'avais pas rencontré un tel acharnement...
Franchement, ça ne saute pas aux yeux non plus, c'est vraiment bien ficelé.
On peut dire que le mec qui est déjà en situation de monopole intergalactique n'a pas vraiment confiance en son petit OS d'amour pour mettre en place de telles options de sécurité et de tels verrous. Bonjour la paranoïa!!!!!
Bref, faites très attention aux détails sur cette page de boot configuration. CK.
Hors ligne
#48 Le 26/06/2013, à 19:03
- kikislater
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
2 partiellement installés ou enlevés.
E: Impossible d'obtenir le verrou /var/cache/apt/archives/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire /var/cache/apt/archives/
Cette erreur arrive si tu as lancé en même temps un autre gestionnaire de paquet tel que synaptic ou la logithèque ubuntu.
Ca peut arriver également au démarrage lors du controle automatique des mises à jours disponibles.
Ca peut également arriver si synaptic ou la logithèque ubuntu a quitté brutalement et donc le fichier lock est toujours présent. Dans ce cas il faut supprimer le lock à la main.
Que donne un
sudo apt-get update
Quel est ton problème de dépendances ?
Hors ligne
#49 Le 26/06/2013, à 19:10
- malbo
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
et si tu choisis à nouveau de désactiver, une fenêtre de dialogue s'ouvre ( interface laide, comme le reste style BIOS) et on te demande de retaper 4 chiffres qu'on te montre dans cette fenêtre de dialogue pour confirmer ton action.
Fallait le trouver ça et c'est HP qui l'a inventé...C'est peut-être bien vrai qu'ils sont très cons (voir cette discussion)
Dernière modification par malbo (Le 26/06/2013, à 19:13)
Hors ligne
#50 Le 26/06/2013, à 20:25
- ClaireK
Re : Installer Ubuntu sur un PC portable tactile/RESOLU.
Voilà, Malbo, toi le Kador du Bios et du Boot, tu n'es pas arrivé au bout de ta peine car les mecs sont futés en matière de R&D "Comment enquiquiner les utilisateurs".
Je crois que nos chemins se séparent là pour le moment vu que mes install sont maintenant terminées. Merci pour ton aide.
Je pars voguer sur les eaux troubles du tactile pas vraiment tactile pour le moment.
Pour se recentrer sur le sujet, je me retrouve donc avec un PC qui n'est plus tactile du tout alors que mes maigres expériences d'il y a 2 jours m'ont montré que c'était possible et chouette en plus!!!!
Dois-je en conclure qu'en retirant Windows pour de bon, le PC a perdu ses qualités ?
Je n'ose le croire.
Dans les gestionnaires de paquetages, tous les paquets concernés sont pourtant cochés.
HELP!!!!!!!!
Hors ligne