Pages : 1
#1 Le 09/11/2007, à 13:51
- Valkyr
NTFSFIX ne fonctionne pas?
Bonjour à Tous!
J'ai bien tout lu, pas d'énervement (ça doit être le n-ième post comme ça, désolé).
Voilà ce que j'ai fait:
Pc avec Vista, j'installe Kubuntu 7.10 sur un 2nd disque, ok pas de pb.
Comme prédit, Vista ne boote plus.
J'essaie alors ntfsfix, j'essaie de monter la partition, enfin tout plein de choses glanées ici et là sur le forum, et là je suis un peu perdu.
Alors voilà où j'en suis avec fdisk -l:
Disque /dev/sda: 203.9 Go, 203928109056 octets
255 heads, 63 sectors/track, 24792 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0x05c905c8
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 2 18419 147942585 7 HPFS/NTFS
/dev/sda2 18471 24792 50781465 83 Linux
/dev/sda3 18420 18470 409657+ 82 Linux swap / Solaris
Les entrées de la table de partitions ne sont pas dans l'ordre du disque
Disque /dev/sdb: 163.9 Go, 163928604672 octets
115 heads, 37 sectors/track, 75246 cylinders
Units = cylindres of 4255 * 512 = 2178560 bytes
Disk identifier: 0x00000001
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 1 75245 160083719 7 HPFS/NTFS
/dev/sdb4 * 12575 12579 10637+ e W95 FAT16 (LBA)
J'essaie ntfsfix:
Mounting volume... FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb1 was processed successfully.
Ok, mais ça boote toujours pas sous Vista.
Qui pourrait m'aider svp, c'est mon pc du boulot et là... j'ai joué avec le feu et ça commence sérieusement à sentir le roussi ^^'
J'ai eu moins de pb avec Ubuntu edgy, mon gros soucis viendrait donc de Vista?
Dernière modification par Valkyr (Le 09/11/2007, à 16:32)
Hors ligne
#2 Le 09/11/2007, à 14:54
- Valkyr
Re : NTFSFIX ne fonctionne pas?
Voici mon grub:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1defd953-c75b-4101-b846-1935bcc7aacf ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,1)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=1defd953-c75b-4101-b846-1935bcc7aacf ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=1defd953-c75b-4101-b846-1935bcc7aacf ro single
initrd /boot/initrd.img-2.6.22-14-generic
title Ubuntu 7.10, memtest86+
root (hd0,1)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title Microsoft Windows XP �dition familiale
root (hd1,0)
savedefault
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
Hors ligne
#3 Le 09/11/2007, à 15:37
- Valkyr
Re : NTFSFIX ne fonctionne pas?
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1
et
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 1 75245 160083719 7 HPFS/NTFS
/dev/sdb4 * 12575 12579 10637+ e W95 FAT16 (LBA)
ça me chagrine un peu... à votre avis ça cherche bien où ça devrait pour booter Vista?
Hors ligne
#4 Le 09/11/2007, à 16:33
- Valkyr
Re : NTFSFIX ne fonctionne pas?
La commande NTFSFIX semble fonctionner
jps@Kubuntu-Test:~$ sudo ntfsfix /dev/sdb1
Mounting volume... OK
Processing of $MFT and $MFTMirr completed successfully.
NTFS volume version is 3.1.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS partition /dev/sdb1 was processed successfully.
Mais ça ne boote toujours pas !?!?
Personne n'a une idée?
Hors ligne
#5 Le 22/12/2007, à 23:21
- Tullio
Re : NTFSFIX ne fonctionne pas?
Hello ! Je suis dans le même cas que toi ! Help Help !
Hors ligne
Pages : 1